One document matched: draft-urien-eap-smartcard-06.txt
Differences from draft-urien-eap-smartcard-05.txt
Internet Draft P.Urien
Document: draft-urien-eap-smartcard-06.txt A.J. Farrugia
M.Groot
G.Pujolle
J.Abellan
Expires: February 2004
EAP-Support in Smartcard
Status of this Memo
By submitting this Internet-Draft, I certify that any applicable
patent or other IPR claims of which I am aware have been disclosed,
or will be disclosed, and any of which I become aware will be
disclosed, in accordance with RFC 3668.
This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet
Drafts.
Internet-Drafts are draft documents valid for a maximum of six
Months and may be updated, replaced, or obsoleted by other documents
at any time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html
Copyright Notice
Copyright (C) The Internet Society (2004). All Rights Reserved.
1 Abstract
This document describes the interface to the EAP protocol in
smartcards, which may store multiple identities associated to EAP
methods and appropriate credentials.
Urien & All Informational - Expires February 2005 1
EAP-Support in Smartcard August 2004
Table of Contents
Copyright Notice...................................................1
1 Abstract.........................................................1
2 Overview.........................................................4
3 Terms............................................................4
4 Relationship with RFC 2284.......................................5
4.1 EAP multiplexing model......................................5
4.2 EAP smartcards..............................................5
5 Identification label.............................................6
6 UserID Coding Rules..............................................7
7 Mandatory and optional services..................................7
7.1 Add-Identity................................................7
7.2 Delete-Identity.............................................7
7.3 Get-Preferred-Identity......................................7
7.4 Get-Current-Identity........................................8
7.5 Get-Next-Identity...........................................8
7.6 Get-Profile-Data............................................8
7.7 Set-Identity................................................8
7.8 Process-EAP.................................................8
7.9 Get-Session-Key (SK)........................................9
7.10 Get-802.1X-State...........................................9
7.11 Reset-801.1X-State........................................10
7.12 Method Functions..........................................10
7.13 Relationship with the 802.1X supplicant state machine.....10
7.14 Multiple EAP Identity selection...........................11
8 Relationships with the Smartcard Interface......................11
9 ISO 7816-4 APDUs................................................11
9.1 ISO 7816 Status Word.......................................12
9.2 Segmentation/Reassembly rules..............................12
9.2.1 Segmentation.........................................12
9.2.2 Reassembly...........................................13
9.3 PIN Management.............................................13
9.3.1 Verify PIN...........................................13
9.3.2 Change PIN...........................................13
9.3.3 Enable PIN...........................................14
9.3.4 Disable PIN..........................................14
9.3.5 Unblock PIN..........................................14
9.4 Multi-Applications smartcard considerations................14
9.5 Add-Identity...............................................15
9.6 Delete-Identity............................................15
9.7 Get-Preferred-Identity.....................................15
9.8 Get-Current-Identity.......................................16
9.9 Get-Next-Identity..........................................16
9.10 Get-Profile-Data..........................................16
9.11 Set-Identity..............................................16
9.12 Set-Multiple-Identity.....................................17
9.13 Process-EAP...............................................17
9.14 Method Functions..........................................18
9.15 Get-Session-Key...........................................19
9.16 Get-Current-Version.......................................20
Urien & All Informational - Expires February 2005 2
EAP-Support in Smartcard August 2004
9.17 Get-802.1X-State..........................................20
9.18 Reset-802.1X-State........................................20
9.19 Commands summary..........................................22
10 State Machine Sequence.........................................23
10.1 Supplicant software state machine sequence................23
10.2 Smartcard EAP framework state machine sequence............23
11 Security Considerations........................................23
11.1 General Considerations....................................23
11.2 PEAP Consideration........................................24
12 Intellectual Property Right Notice.............................24
13 Annex 1 (Informative) - EAP/SIM packet detail..................25
14 Annex 2 (Informative) - EAP/MD5 packet details.................28
15 Annex 3 (Informative) TLS support..............................30
15.1 Unix Time issue...........................................30
15.2 Fragment Maximum Size.....................................31
15.3 EAP/TLS messages format...................................31
15.4 Example of EAP/TLS Authentication.........................32
16 Annex 4 (Normative) ASN.1 BER Tag coding for the subscriber
profile information...............................................33
16.1 ASN.1 Subscriber Profile Encoding.........................33
16.1.1 EapID...............................................33
16.1.2 EapType.............................................33
16.1.3 Version.............................................33
16.1.4 User Credential.....................................33
16.1.5 UserProfile.........................................34
16.1.6 UserProfile encoding example........................34
17 Annex 5 (Informative) APDUs exchange example...................35
18 Annex 6, EAP-TLS ISO7816 APDUs Trace (T=0 Protocol)............36
18.1 EAP-TLS session parameters................................36
18.1.2 CA Public Key (2048 bits)...........................36
18.1.3 Server Public Key (1024 bits).......................36
18.1.4 Client Private Key (1024 bits)......................36
18.2 Full EAP-TLS trace (mode 2)...............................37
18.3 EAP-TLS mode1 ISO7816 trace (T=0 protocol)................44
19 References.....................................................47
20 Author's Addresses.............................................48
Intellectual Property Statement...................................49
Disclaimer of Validity............................................49
Copyright Statement...............................................49
Acknowledgment....................................................49
Urien & All Informational - Expires February 2005 3
EAP-Support in Smartcard August 2004
2 Overview
All technologies derived from 802.11 specifications such as 802.11a,
802.11b, 802.11g need strong security protocols for data privacy,
integrity and network access. The 802.1X [8] specification describes
the risks and the protocols for the protection of the exchanged data
during the network connection.
802.1X specification requires the Extensible Authentication Protocol
(EAP) to be used as the framework for application dependent
authentication processes with a mutual authentication between the
supplicant and the authenticator. It is obvious that the role of the
supplicant in this specification could partly be implemented in the
smartcard as an authentication processing mean. The flexibility of
EAP (RFC 2284) specification does not provide a Mandatory-to-
implement solution. The structure of the EAP frames allows the
applications to identify the EAP type of consequently to operate the
appropriate authentication.
This draft describes a standard interface to EAP implementation
embedded in a smartcard. This device is generally considered as the
most secure computing platform.
3 Terms
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC-2119.
AS: Authentication Server
Authenticator: See the IEEE 802.1X specification for a definition of
this concept.
EAP: Extensible Authentication Protocol
GSM: Global System for Mobile communications
IMSI: International Mobile Subscriber Identifier, used in GSM to
identify subscribers.
NAI: Network Access Identifier
PIN: Personal Identification Number
SK: Session Key
SIM: Subscriber Identity Mobile
Supplicant: an IEEE 802.1X concept, which in the context of IEEE
802.11 represents a STA (station) seeking to attach to an IEEE 802
LAN via an IEEE 802.1X Port. See the IEEE 802.1X specification for a
complete definition.
Urien & All Informational - Expires February 2005 4
EAP-Support in Smartcard August 2004
4 Relationship with RFC 2284
4.1 EAP multiplexing model
According to [14], EAP implementations conceptually consist of the
three following components:
[1] Lower layer. The lower layer is responsible for transmitting and
receiving EAP frames between the peer and authenticator. EAP has
been run over a variety of lower layers including
- PPP;
- Wired IEEE 802 LANs [IEEE-802.1X];
- IEEE 802.11 wireless LANs [IEEE-802.11];
- UDP (L2TP [RFC2661] and ISAKMP [PIC]);
- and TCP [PIC].
[2] EAP layer. The EAP layer receives and transmits EAP packets via
the lower layer, implements duplicate detection and retransmission,
and delivers and receives EAP messages to and from EAP methods.
[3] EAP method. EAP methods implement the authentication algorithms
and receive and transmit EAP messages via the EAP layer. Since
fragmentation support is not provided by EAP itself, this is the
responsibility of EAP methods.
4.2 EAP smartcards
An EAP smartcard implements an EAP method and works in cooperation
with a smartcard interface entity, that sends and receives EAP
messages to/from this component. The simplest form of this interface
is a software bridge that forwards EAP messages to smartcard.
According to EAP methods complexity and smartcard computing
capacities, protocols sub-sets, that donÆt deal with security
features may be computed by the smartcard interface entity.
Urien & All Informational - Expires February 2005 5
EAP-Support in Smartcard August 2004
+-+-+-+-+-+-+
| EAP method|
| Smartcard |
+-+-+-+-+-+-+
!
+-+-+-+-+-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+-+-+-+-+
| Smartcard | | | | |
| Interface | EAP method| | EAP method| EAP method|
| Type = X | Type = Y | | Type = X | Type = Y |
| V | | | ^ | |
+-+-+-+-!-+-+-+-+-+-+-+-+ +-+-+-+-!-+-+-+-+-+-+-+-+
| ! | | ! |
| EAP ! Layer | | EAP ! Layer |
| ! | | ! |
+-+-+-+-!-+-+-+-+-+-+-+-+ +-+-+-+-!-+-+-+-+-+-+-+-+
| ! | | ! |
| Lower ! Layer | | Lower ! Layer |
| ! | | ! |
+-+-+-+-!-+-+-+-+-+-+-+-+ +-+-+-+-!-+-+-+-+-+-+-+-+
! !
! Peer ! Authenticator
+------------>-------------+
5 Identification label
802.1X specification [5] requires an authentication between the
authentication server (AS) and the supplicant. The authentication is
embedded in the Extensible Authentication Protocol (EAP) RFC2284 [1]
specification. The authentication consists of a challenge response
between both parties without consideration of the involved crypto-
suite. Before starting the mutual authentication, the AS needs the
supplicant identity to establish the session. The AS or the
authenticator sends an EAP Request Identity to the supplicant that
returns its system identity. A user may own several identities
associated to corporate/personal networks or operators' networks.
The identification label is a pointer to a system identity (the EAP-
ID value returned in the EAP-Identity.response message) stored in
smartcard; it may be of various types:
1. A network SSID as described in the 802.11 standard [4].
2. A user's identification (UserID) e.g. an ASCII string (as
described in section 6). A network access identifier, NAI [6] may be
used as UserID.
3. A pseudonym, e.g. a friendly name.
According to the network environment, the supplicant software needs
to set the appropriate identity
Urien & All Informational - Expires February 2005 6
EAP-Support in Smartcard August 2004
The subsequent sections give the description of the methods used by
a supplicant for processing an 802.1X authentication using the
smartcard.
Annex one provides a reference implementation example for a SIM
based authentication. Annex two provides a reference implementation
example for a MD5 based authentication. Annex three provides a
reference implementation for a TLS based authentication. Annex four
describes the user's profile according to the ASN.1 [9] syntax.
Annex five illustrates an MD5 authentication scenario that works
with an EAP smartcard. Annex six shows ISO 7816 data exchanges with
EAP-TLS smartcards.
6 UserID Coding Rules
This section describes the structure and the architecture of the
UserID.
A UserID consists of 2 fields separated by the Internet symbol "@".
The right hand side of the "@" symbol is the UserID realms while the
left hand side is an application dependent and unique identification
number.
EAP/SIM has defined the UserID where the application identification
is "1IMSI". Other UserID such as eMail address can be used by the
application.
7 Mandatory and optional services
Mandatory services MUST be implemented in any smartcard that claims
conformance with this draft. Optional services are not required by
basic authentication operations.
7.1 Add-Identity
Status: Optional.
This command and the Delete-Identity are part of the user's identity
management protocols. The smartcard is initially manufactured
without any identification label. The personalization or the
supplicant software adds in the smartcard user's identification
label that can be retrieved by other smartcard command.
7.2 Delete-Identity
Status: Optional
This command and the add-Identity are part of the user's identity
management protocols. The smartcard contains a list of one or
several identification labels that can be retrieved by the
supplication software. The command deletes one entry of the
smartcard list.
7.3 Get-Preferred-Identity
Status: Optional
Urien & All Informational - Expires February 2005 7
EAP-Support in Smartcard August 2004
The smartcard contains at least one user's identity related to the
user's network subscription. The supplicant software gets from the
smartcard the initial and preferred identification label. If the
user has more than one identity the supplicant software uses the
Get-Next-Identity to read all the available other user's identities.
7.4 Get-Current-Identity
Status: Mandatory
The smartcard contains at least one user's identity related to the
user's network subscription. The supplicant software gets from the
smartcard its current identification label.
7.5 Get-Next-Identity
Status: Mandatory
The smartcard may contain one or more user's identities according to
the user's network subscriptions. The supplicant software should
prompt the user's identity and a subsequent selection allows the
smartcard to process the appropriate EAP authentication type. The
method Get-Next-Identity allows the supplicant software to read all
the available user's identities.
The Get-Next-Identity method may inform the supplicant software when
all user's identities have been read. Otherwise the supplicant
software detects the identity list end when it gets again the first
identity.
7.6 Get-Profile-Data
Status: Optional
The Authentication Agent or the authenticator may request the
subscriber profile information. The Get-Profile-Data returns all
related information available in the smartcard. Details of the
subscriber profile information are given in annex 4. The
implementation of the information may be ruled but ASN.1 BER coding
specification [9] or by an XML dialect [10].
7.7 Set-Identity
Status: Mandatory
Once the Identity selection is processed, the supplicant software
needs to set the smartcard EAP framework according to the selected
user's identity. The Set-Identity sets or restarts the smartcard EAP
framework state machine for further processing using the EAP-Packets
method.
7.8 Process-EAP
Status: Mandatory
The EAP process is described in the RFC 2284 specification [1] and
involves several EAP requests and responses packets,
1) EAP request/response Identity;
2) A suite of EAP request/response related to a particular
authentication scenario; and
Urien & All Informational - Expires February 2005 8
EAP-Support in Smartcard August 2004
3) EAP success or failure.
The Set-Identity restarts the smartcard EAP framework state machine
for further processing using the EAP-Packets method.
An incoming EAP/Request/Identity restarts the smartcard EAP
framework state machine for further processing using other EAP-
Packets methods.
The smartcard receives the RFC 2284 frames. It retrieves the
appropriate EAP authentication type in the frame and the identifier.
The smartcard maintains the EAP state machine and returns an EAP NAK
packet if the state sequence is broken. In that case it restarts the
AUTHENTICATING state.
Any EAP request is silently ignored if the state machine was not
started.
The last step of the protocol retrieves the session Key from the
smartcard.
7.9 Get-Session-Key (SK)
Status: Mandatory.
At the end of a successful authentication the supplicant needs to
update the appropriate crypto suite (if any) using the session key.
The Get-Session-Key returns to the supplicant software the key to
initialize radio security protocols like TKIP, or CCMP.
In an 801.1X [5] context, SK should be interpreted as the unicast
key.
In an 802.11i or WPA context SK should be interpreted as the PMK
(Pairwise Master Key).
7.10 Get-802.1X-State.
Status: Optional.
This command returns the current smartcard 802.1X state:
1) IDENTITY-NOT-SET, no authentication identity has been selected.
2) AUTHENTICATING.
3) AUTHENTICATED, authentication success, AUTHENTICATING state
restarted.
4) NOT-AUTHENTICATED, AUTHENTICATING state restarted.
Urien & All Informational - Expires February 2005 9
EAP-Support in Smartcard August 2004
7.11 Reset-801.1X-State.
Status: Optional.
This command forces the EAP smartcard in the NOT-AUTHENTICATED
state. See section -Relationship with the 802.1X supplicant state
machine-.
7.12 Method Functions
Status: Optional.
EAP smartcards that are not able to completely process an EAP method
MAY support some essential security procedures, like for example,
-X509 Certificate storage
-Random generator
-Private key encryption
-Private key decryption
-Public key encryption
-Public key decryption
-Symmetric key encryption
-Symmetric key decryption
7.13 Relationship with the 802.1X supplicant state machine
reset
+-------------------+ +------>+----------------------+
+-->| ACQUIRED | | +-->| AUTHENTICATING |<-+
| +-------------------+ | | +----------------------+ |
| | txRspId(reveiveId,| | | | txRspAuth(receivedId,| |
| | previousId)| | | | previousId) | |
| | previousId= | | | | previousId= | |
| | receivedId | | | | reveivedId | |
| +-------------------+ | | +--+---+----------+----+ |
| | | | | | reqId | |
| +----------------+ +--<---+ | +---->--+
| reqAuth | error
+--------------------<------------------------+
The supplicant state machine, as described in 802.1x standard is
split between the terminal and the smartcard. The smartcard only
implements the AUTHENTICATING state.
Upon reception of the Set-Identity command smartcard unconditionally
transits in the AUTHENTICATING state.
Upon reception of the EAP Identity-Request message, smartcard
unconditionally moves in the ACQUIRED state, delivers an Identity
response message and re-enters the AUTHENTICATING state.
In agreement with the 802.1X state machine all EAP requests are
processed in the AUTHENTICATING state.
Urien & All Informational - Expires February 2005 10
EAP-Support in Smartcard August 2004
The final EAP notification message (either success or failure)
indicates the end of the authentication process. ItÆs optionally
forwarded to the EAP smartcard.
If any error occurs during the authentication procedure (reception
of NAK or failure messages ...) the smartcard restarts at the
AUTHENTICATING state where it will wait for an identity request or
the first EAP-Type request.
If the EAP smartcard support security features like PIN code or
biometric identification, all EAP messages will be silently discard
before the occurrence of a successful bearer authentication.
7.14 Multiple EAP Identity selection
Status: Optional.
Multiple EAP authentications may be processed simultaneously in the
same smartcard. If this capability is supported, the following rules
apply:
1) Multiple EAP Identities may be selected at the same time.
2) The supplicant software shall indicate in the Set-Identity
command the short identifier to be associated with the selected EAP
identity.
The supplicant software shall include this short identifier when
necessary, in order to inform which of the selected EAP identities
the command is targeted to.
The smartcard software shall maintain a separate EAP state machine
for each of the different selected EAP identities.
8 Relationships with the Smartcard Interface.
The Smartcard Interface is a piece of software implemented in the
supplicant that processes the authentication method. This component
must be able to detect a smartcard. If this device is not present,
or if it silently discards an EAP.request message, then Smartcard
Interface MUST reject all incoming request messages by the NAK code.
9 ISO 7816-4 APDUs
This section of the document provides an implementation of the
previous descriptions for an ISO 78176-4 compatible smartcard. The
section does not preclude of the transport protocol used between the
smartcard and the reader. Thus, this specification does not mandate-
to-implement any transport protocol such as T=0 or T=1, which are
Urien & All Informational - Expires February 2005 11
EAP-Support in Smartcard August 2004
not in the scope of this document. It should be noticed that all
values are in hex representation.
The restriction and security related descriptions are not present in
the document. Annexes of this document give implementation examples.
Note: Class byte value defined in this section ('A0') shall be
interpreted as an implementation example. Other values may be used
respecting conventions defined in ISO 78176-4.
9.1 ISO 7816 Status Word
According to ISO 7816, the status word SW1,SW2 is a two bytes word,
giving information about current operation either success or
failure.
'90' '00' indicates an operation success
'98' '04' indicates one of the following events,
- Access Condition not fulfilled, e.g. a pin code presentation
is required.
- Unsuccessful user PIN verification, at least one attempt left.
'98' '40' indicates one of the following events
- Unsuccessful user PIN verification, no attempt left
- Smartcard blocked
'9F' 'xx' indicates that xx bytes (mod 256) are ready for reading.
- The FETCH command (A0120000xx) is used for reading xx bytes
'67' 'XX'
- Incorrect parameter P3
'6B' 'XX'
- Incorrect parameter P1 or P2
'6D' 'XX'
- Unknown instruction code (INS) given in the command
'6E' 'XX'
- Wrong instruction class (CLA) given in the command
'6F' 'XX'
- Technical problem, not implemented...
'61 ''XX'
- Operation result MUST be fetched by the ISO Get Response APDU
(CLA = 'C0', P3= 'XX')
'6C ''XX'
- Operation must be performed again, with the LE parameter
value sets to 'XX'.
'70' '00'
- Packet silently discarded.
'70' '01'
- Authentication failure
9.2 Segmentation/Reassembly rules
9.2.1 Segmentation
Urien & All Informational - Expires February 2005 12
EAP-Support in Smartcard August 2004
When a command transfers a payload, whose size is greater than 255
bytes, the less significant bit of the P1 byte is used as a More
flag.
- This bit is equal to zero for a non fragmented payload or a last
fragment (More = 0 = false).
- This bit is set to one (More = 1 = true) for a payload fragment.
See annexes for examples.
9.2.2 Reassembly
- When a command reads less than 256 bytes, or in the last bloc
case, the returned payload ends by the 9000 Status Word.
- When a command returns more than 256 bytes, each payload bloc
(excepted the last one) ends by the 9Fxx Status Word, in which xx
indicates the length of the next bloc. The FETCH (INS=12) command
(A0120000xx) is used to read the next bloc.
- See annexes for examples.
9.3 PIN Management
Some services may require that the smartcardÆs bearer presents its
PIN code.
Smartcard returns the '98' '04' status word when itÆs necessary to
check the PIN code, before accessing to a particular service (see
previous section). A PIN code is typically a four/eight digits
decimal number, ASCII encoded, and ranging between '0000' and
'9999'.
9.3.1 Verify PIN
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| Verify | A0 | 20 | 00 | 00 | 08 | 00 |
+--------+-----+-----+----+----+----+----+
The ISO APDU Verify is used when a PIN code presentation is required
Lc is the PIN code length, typically height ASCII encoded bytes.
9.3.2 Change PIN
This APDU modifies the user PIN code.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
Urien & All Informational - Expires February 2005 13
EAP-Support in Smartcard August 2004
+--------+-----+-----+----+----+----+----+
| Change | A0 | 24 | 00 | 00 | 10 | 00 |
+--------+-----+-----+----+----+----+----+
The old PIN (8 bytes) and new PIN (8 bytes) are presented
9.3.3 Enable PIN
This APDU enables the user PIN function.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| Enable | A0 | 26 | 00 | 00 | 08 | 00 |
+--------+-----+-----+----+----+----+----+
The user PIN code (8 bytes) is presented.
9.3.4 Disable PIN
This APDU disables the user PIN function.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| Disable| A0 | 28 | 00 | 00 | 08 | 00 |
+--------+-----+-----+----+----+----+----+
The user PIN code is presented.
9.3.5 Unblock PIN
This APDU unblocks a smartcard, blocked after three wrong PIN code
presentations.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| Unblock| A0 | 2C | 00 | 00 | 10 | 00 |
+--------+-----+-----+----+----+----+----+
The user PIN code (8 bytes) and an unblock code (8 bytes) are
presented.
9.4 Multi-Applications smartcard considerations
A smartcard may store several applications, each of them being
identified by a set of bytes referred as the Application IDentifier
(AID).
The ISO APDU Select is used when it's necessary to select an
application, able to process one or more EAP authentication scenari.
Urien & All Informational - Expires February 2005 14
EAP-Support in Smartcard August 2004
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| Select | 00 | A4 | 04 | 00 | xx | 00 |
+--------+-----+-----+----+----+----+----+
Lc is the AID length.
According to ISO 7816-7 AID is made of two parts
-RID, a mandatory 5 bytes field that identifies a company or a
standardization body.
-PIX, up to 11 bytes, which identifies an application.
9.5 Add-Identity
This command adds an identification label as described in the
section: Identification Label Coding Rules. The smartcard list is
managed by the smartcard. The identification label is appended as
the last element of the list.
Identity coding guidelines are not yet specified.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 17 | 00 | 81 | xx | 00 |
+--------+-----+-----+----+----+----+----+
9.6 Delete-Identity
This command deletes the identification label as described in the
section: Identification Label Coding Rules. The command parameter
gives the identification label to be deleted.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 17 | 00 | 82 | xx | 00 |
+--------+-----+-----+----+----+----+----+
9.7 Get-Preferred-Identity
This command returns the user's preferred identification label
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 17 | 00 | 02 | 00 | XX |
+--------+-----+-----+----+----+----+----+
Urien & All Informational - Expires February 2005 15
EAP-Support in Smartcard August 2004
9.8 Get-Current-Identity
This command returns user's current identification label.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 18 | 00 | AA | 00 | XX |
+--------+-----+-----+----+----+----+----+
If "multiple EAP Identity selection" is not supported, P2 (AA value)
shall be set to '00'.
If "multiple EAP Identity selection" is supported, P2 (AA value)
shall indicate the short identifier associated with the selected EAP
identity to which the command is targeted. These short identifiers
are coded as described in Set-Identity command.
9.9 Get-Next-Identity
This command returns an user's identification label.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 17 | 00 | 01 | 00 | XX |
+--------+-----+-----+----+----+----+----+
9.10 Get-Profile-Data
The command returns the related subscriber profile information
according to the application requirements and format. Profile coding
rules are defined in annex 4.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 1A | 00 | AA | 00 | YY |
+--------+-----+-----+----+----+----+----+
If "multiple EAP Identity selection" is not supported, P2 (AA value)
shall be set to '00'.
If "multiple EAP Identity selection" is supported, P2 (AA value)
shall indicate the short identifier associated with the selected EAP
identity to which the command is targeted. These short identifiers
are coded as described
9.11 Set-Identity
The command resets and initializes the state machine for processing
the EAP Packets. The first step after this command is an EAP request
Urien & All Informational - Expires February 2005 16
EAP-Support in Smartcard August 2004
identity packet. If a different EAP packet is sent to the smartcard
the smartcard returns an EAP NAK response.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 16 | 00 | 80 | XX | 00 |
+--------+-----+-----+----+----+----+----+
9.12 Set-Multiple-Identity
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 16 | 00 | 83 | XX | 00 |
+--------+-----+-----+----+----+----+----+
The command resets and initializes the state machine for processing
the EAP Packets. The first step after this command is an EAP request
identity packet. If a different EAP packet is sent to the smartcard
the smartcard returns an EAP NAK response.
When "multiple EAP Identity selection" is supported, then the first
status byte is '90' and the second one indicates the short
identifier (coded in one byte) to be associated with the selected
identity.
9.13 Process-EAP
The command is the method for EAP packet management. The smartcard
identifies the EAP packet type and processes the EAP authentication
according to current state machine. The state machine sequences have
to be respected and the smartcard enforces the EAP sequence
processing.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 80 | 00 | AA | XX | YY |
+--------+-----+-----+----+----+----+----+
The EAP request or response packet lengths are represented by the
unknown value XX and YY. The supplicant software should set these
elements in accordance with the EAP packet types.
If "multiple EAP Identity selection" is not supported, P2 (AA value)
shall be set to '00'.
If "multiple EAP Identity selection" is supported, P2 (AA value)
shall indicate the short identifier associated with the selected EAP
identity to which the command is targeted. These short identifiers
are coded as described in Set-Identity command.
Urien & All Informational - Expires February 2005 17
EAP-Support in Smartcard August 2004
Most EAP request packets will produce an EAP response packet from
the smartcard. If no response is to be produced (e.g. packet
silently discard because invalid sequence) the smartcard shall
inform the client software with an alert status word ('7000').
Success and failure packets do not require any response from the EAP
client. A "successfully ending of command (90 00)" Status Word shall
be send from the smartcard once a success EAP packet is processed.
An alert status word ('7000') MAY be sent from the smartcard once a
failure EAP packet is received.
EAP Identity packets are independent of the authentication type;
this section of the document provides the packet details. The rest
of the EAP packet being authentication protocol dependent, they are
detailed in the informative annex of this document.
The description of the EAP/Request/Identity is detailed according to
the IETF RFC 2284 [1].
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Request | Identifier | Length = 5 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 01 |
+-+-+-+-+-+-+-+-+
The description of the EAP/Response/identity is detailed according
to the IETF RFC 2284 [1].
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Response | Identifier | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 01 | |
+-+-+-+-+-+-+-+-+ |
| User Identity |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
9.14 Method Functions.
EAP smartcards that are not able to process a specific full EAP
method may support some essential security procedures.
+------------+-----+-----+----+----+----+----+
| Command |Class| INS | P1 | P2 | Lc | Le |
+------------+-----+-----+----+----+----+----+
Urien & All Informational - Expires February 2005 18
EAP-Support in Smartcard August 2004
| Method-FCT | A0 | 60 | zz | AA | xx | yy |
+------------+-----+-----+----+----+----+----+
If "multiple EAP Identity selection" is not supported, P2 (AA value)
shall be set to '00'.
If "multiple EAP Identity selection" is supported, P2 (AA value)
shall indicate the short identifier associated with the selected EAP
identity to which the command is targeted. These short identifiers
are coded as described in Set-Identity Command.
xx is the length of the input value.
yy is the length of the returned value.
P1 identifies a particular function, and is organized according to
the following scheme:
b7b6 00-Do.Final, 01-Initialize 10-More 11-Reserved
b5b4 Function index
b3b2b1 Function type
0 X509 Certificate reading
1 Random Number Generator
2 Private key encryption
3 Private key decryption
4 Public key encryption
5 Public key decryption
6 Symmetric key encryption
7 Symmetric key decryption
b0 reserved (More bit)
9.15 Get-Session-Key
Once the state machine has received the EAP Success packet the
Smartcard Interface is able to send the Session Key used by the
802.1X or the 802.11i specification for the crypto-suite.
As an illustration the EAP SIM authentication [2] specifies the
Session Key usage according to the system cryptographic suite.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | A6 | 00 | AA | 00 | 40 |
+--------+-----+-----+----+----+----+----+
If "multiple EAP Identity selection" is not supported, P2 (AA value)
shall be set to '00'.
If "multiple EAP Identity selection" is supported, P2 (AA value)
shall indicate the short identifier associated with the selected EAP
Urien & All Informational - Expires February 2005 19
EAP-Support in Smartcard August 2004
identity to which the command is targeted. These short identifiers
are coded as described in Set-Identity Command.
9.16 Get-Current-Version
This command returns the EAP-Type protocol version and the WLAN-SCC
version.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 18 | xx | yy | 00 | 02 |
+--------+-----+-----+----+----+----+----+
P1=00, Reserved
P1 is the current EAP-Type
P2=0, gets the EAP-Type version
P2=1, gets the WLAN-SCC version
9.17 Get-802.1X-State
This command returns the current smartcard state.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 19 | 00 | AA | 00 | 01 |
+--------+-----+-----+----+----+----+----+
If "multiple EAP Identity selection" is not supported, P2 (AA value)
shall be set to '00'.
If "multiple EAP Identity selection" is supported, P2 (AA value)
shall indicate the short identifier associated with the selected EAP
identity to which the command is targeted. These short identifiers
are coded as described in Set-Identity Command.
Returned values:
01 IDENTITY-NOT-SET, EAP messages silently discarded.
02 AUTHENTICATING, Authentication in progress.
03 AUTHENTICATED, waiting for an EAP/Request
04 NOT-AUTHENTICATED, waiting for an EAP/Request
9.18 Reset-802.1X-State
This command forces the EAP smartcard to the 802.1X AUTHENTICATING
state
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 19 | 10 | AA | 00 | 01 |
Urien & All Informational - Expires February 2005 20
EAP-Support in Smartcard August 2004
+--------+-----+-----+----+----+----+----+
If "multiple EAP Identity selection" is not supported, P2 (AA value)
shall be set to '00'.
If "multiple EAP Identity selection" is supported, P2 (AA value)
shall indicate the short identifier associated with the selected EAP
identity to which the command is targeted. These short identifiers
are coded as described in Set-Identity Command.
Returned values:
01 No Identity set, EAP messages are silently discarded.
04 NOT-AUTHENTICATED, waiting for an EAP/Request
Urien & All Informational - Expires February 2005 21
EAP-Support in Smartcard August 2004
9.19 Commands summary.
+------------------------+-----+-----+----+----+----+----+
| Command |Class| INS | P1 | P2 | Lc | Le |
+------------------------+-----+-----+----+----+----+----+
| Process-EAP | A0 | 80 | 00 | ii | xx | yy |
+------------------------+-----+-----+----+----+----+----+
| Method-FCT | A0 | 60 | zz | ii | xx | yy |
+------------------------+-----+-----+----+----+----+----+
| Get-802.1X-State | A0 | 19 | 00 | ii | 00 | 01 |
+------------------------+-----+-----+----+----+----+----+
| Reset-802.1X-State | A0 | 19 | 10 | ii | 00 | 01 |
+------------------------+-----+-----+----+----+----+----+
| Get-Session-Key | A0 | A6 | 00 | ii | 00 | xx |
+------------------------+-----+-----+----+----+----+----+
| Get-Profile-Data | A0 | 1A | 00 | ii | 00 | yy |
+------------------------+-----+-----+----+----+----+----+
| Get-Current-Identity | A0 | 18 | 00 | ii | 00 | yy |
+------------------------+-----+-----+----+----+----+----+
| Get-Next-Identity | A0 | 17 | 00 | 01 | 00 | yy |
+------------------------+-----+-----+----+----+----+----+
| Get-Preferred-Identity | A0 | 17 | 00 | 02 | 00 | yy |
+------------------------+-----+-----+----+----+----+----+
| Set-Identity | A0 | 16 | 00 | 80 | xx | 00 |
+------------------------+-----+-----+----+----+----+----+
| Set-Multiple-Identity | A0 | 16 | 00 | 83 | xx | 00 |
+------------------------+-----+-----+----+----+----+----+
| Add-Identity | A0 | 17 | 00 | 81 | xx | 00 |
+------------------------+-----+-----+----+----+----+----+
| Delete-Identity | A0 | 17 | 00 | 82 | xx | 00 |
+------------------------+-----+-----+----+----+----+----+
| Get-Current-Version | A0 | 18 | xx | yy | 00 | 02 |
+------------------------+-----+-----+----+----+----+----+
| Verify-PIN | A0 | 20 | 00 | 00 | 08 | 00 |
+------------------------+-----+-----+----+----+----+----+
| Change-PIN | A0 | 24 | 00 | 00 | 10 | 00 |
+------------------------+-----+-----+----+----+----+----+
| Enable-PIN | A0 | 26 | 00 | 00 | 08 | 00 |
+------------------------+-----+-----+----+----+----+----+
| Disable-PIN | A0 | 28 | 00 | 00 | 08 | 00 |
+------------------------+-----+-----+----+----+----+----+
| Unblock-PIN | A0 | 2C | 00 | 00 | 10 | 00 |
+------------------------+-----+-----+----+----+----+----+
| Select-AID | A0 | A4 | 04 | 00 | xx | 00 |
+------------------------+-----+-----+----+----+----+----+
| Get-Response | A0 | C0 | 00 | 00 | 00 | xx |
+------------------------+-----+-----+----+----+----+----+
| FETCH | A0 | 12 | 00 | 00 | 00 | xx |
+------------------------+-----+-----+----+----+----+----+
Urien & All Informational - Expires February 2005 22
EAP-Support in Smartcard August 2004
10 State Machine Sequence
10.1 Supplicant software state machine sequence
+-----------------------+ +-----------------------+
|A-Get user's identity |-->|B-Set user's identity |>>>
+-----------------------+ +-----------v-----------+
|
+--------------------------+
|
+------------v--------------+ +-------------------+
|C-send/receive EAP packets |<->|D-Get-Session-Key |
+---------------------------+ +-------------------+
Transitions:
A-B : All available identities received by Get-Next-Identity
commands
B-C : Set-Identity command successfully performed
C-D : Successful ending of EAP-Packets command with no outgoing
packet(Status word of the command equals '9000'). This can be also
detected by 'authenticated' status following the Authentication-
Status command.
D-C : An incoming EAP/Request packet
10.2 Smartcard EAP framework state machine sequence
+----------------------+ +----------------------+
| Z-IDENTITY-NOT-SET |-->|W-NOT-AUTHENTICATED |<-+
+----------------------+ +----------------------+ |
|
+-----------------------------------------+
|
+----------v-----------+ +----------------------+
| Y-AUTHENTICATING |<--| X-AUTHENTICATED |
+----------------------+ +----------------------+
Transitions:
Z-W : An available identity successfully set
Y-X : Authentication Successful.
Y-W : Authentication Error.
X-Y : First Authentication Request received.
W-Y : First Authentication Request received
11 Security Considerations
11.1 General Considerations
Urien & All Informational - Expires February 2005 23
EAP-Support in Smartcard August 2004
As a reference implementation the previous section provides the
details of the EAP authentication using the GSM SIM. This section of
the document highlights the new potential risks providers of
application may face by re-using deployed networks for other
purposes. From the document [7] fatal flaw does exist when have
physical access to the smartcard.
The nature of the Internet network does no longer require getting
physical access to the smartcard. Worms, Trojan horses or viruses
can move to the computing platforms and performs the jobs. It is
important for a reference implementation to provide the relevant
level of protection for the new applications but not to create other
flaws.
Other consideration have been introduced in [2] to protect the
smartcard against crypto attack and recommends the authentication
should take place in a PROTECTED ENVIRONMENT.
11.2 PEAP Consideration
Protected Extensible Authentication Protocol (PEAP) [12] is a pre-
processing protocol that allows the privacy of data when processing
EAP [1] protocol. EAP protocol, as defined in [1], starts by an EAP
packet request/Identity. The EAP packet response Identity returns
the user's identification label with no privacy being not part of
[1].
PEAP protocol allows both part of the EAP packet exchange creating a
session key that can be for privacy over the subsequent execution of
the EAP protocol.
This implementation of EAP in the smartcard MAY allow performing a
PEAP tunnel for privacy. Once PEAP first phase has been successfully
preformed, the EAP protocol (or other protocol) has defined shall be
performed according the EAP smartcard requirements.
12 Intellectual Property Right Notice
To be specify according to the Author and Participants.
Urien & All Informational - Expires February 2005 24
EAP-Support in Smartcard August 2004
13 Annex 1 (Informative) - EAP/SIM packet detail.
The protocol implementation is out of the scope of this document but
as a reference implementation this section gives details using the
SIM as specified by [3]. Other protocol can be implemented using ISO
7816-3 TPDU. This section of the document gives the APDU syntax and
coding which makes the specification protocol free.
The first EAP packet is the EAP Request Identity. This initial
packet format complies with [1]. The smartcard returns an EAP
response identity according to the IMSI length and the supported
version according to [2].
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 80 | 00 | 00 | 05 | YY |
+--------+-----+-----+----+----+----+----+
The description of the EAP/Request/identity is detailed according to
the IETF RFC 2284 [1]. This EAP packet doesnÆt respect the EAP/SIM
format since it is only part of [1].
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Request | Identifier | Length = 5 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 01 |
+-+-+-+-+-+-+-+-+
The description of the EAP/Response/identity is detailed according
to the IETF RFC 2284 [1].
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Response | Identifier | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 01 | |
+-+-+-+-+-+-+-+-+ |
| |
| User Identity |
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Note the EAP/Response/Identity when returning the user's identity
that includes the IMSI includes the real coded IMSI in the EAP
packet and not the IMSI coded for GSM network. Further information
can be retrieved in [3] for the IMSI coding in the SIM during the
SIM setting.
Urien & All Informational - Expires February 2005 25
EAP-Support in Smartcard August 2004
The user Identity field can contains the user's permanent pseudonym
or re-authentication identity.
The second EAP Packet is the EAP request SIM start as represented in
the IETF draft document [2].
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 80 | 00 | 00 | XX | YY |
+--------+-----+-----+----+----+----+----+
The description of the EAP/Request/SIM/Start is detailed according
to [2] incoming SIM data where further information can be retrieved.
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Request | Identifier | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 18 | Subtype = 10 | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|AT_PERM..._REQ | Length = 1 | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|AT_FULL..._RES | Length = 1 | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|AT_ANY_ID_REQ | Length = 1 | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|AT_VERSION_L...| Length | Actual Version List Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Supported version 1 | Supported version 2 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Supported version 3 | Padding |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The description of the EAP/Response/SIM/Start is detailed according
to [2] outgoing SIM data where further information can be retrieved.
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Response | Identifier | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 18 | Subtype = 10 | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|AT_NONCE_MT | Length = 5 | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
| NONCE_MT |
| |
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Urien & All Informational - Expires February 2005 26
EAP-Support in Smartcard August 2004
| AT_SELECTED | Length = 1 | Select Version |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| AT_IDENTITY | Length | Actual Identity Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
| User Identity (Optional) |
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The description of the EAP/Response/SIM/Start is detailed according
to [2] outgoing SIM data where further information can be retrieved.
The third EAP Packet is the EAP request SIM Challenge as represented
in the IETF draft document [2].
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 80 | 00 | 00 | XX | 1C |
+--------+-----+-----+----+----+----+----+
The description of the EAP/Request/SIM/Challenge is detailed
according to [2] incoming SIM data where further information can be
retrieved.
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Request | Identifier | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 18 | Subtype = 11 | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| AT_RAND | Length | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
| n*RAND |
| |
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| AT_MAC | Length = 5 | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
| MAC |
| |
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| AT_IV | Length = 5 | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
| Initialization Vector (Optional) |
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Urien & All Informational - Expires February 2005 27
EAP-Support in Smartcard August 2004
| AT_ENCR_DATA | Length | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
| Encrypted Data (Optional) |
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The description of the EAP/Response/SIM/Challenge is detailed
according to [2] outgoing SIM data where further information can be
retrieved.
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Response | Identifier | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 18 | Subtype = 11 | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| AT_MAC | Length = 5 | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
| MAC |
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The last EAP Packet is the EAP success notification as represented
in the IETF RFC 2284 [2].
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 80 | 00 | 00 | 04 | 00 |
+--------+-----+-----+----+----+-- -+----+
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Success | Identifier | Length = 04 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
14 Annex 2 (Informative) - EAP/MD5 packet details
The first EAP packet is the EAP Request Identity. This initial
packet format complies with the RFC 2284. The smartcard returns an
EAP response identity according to the NAI length.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 80 | 00 | 00 | 05 | YY |
+--------+-----+-----+----+----+----+----+
Urien & All Informational - Expires February 2005 28
EAP-Support in Smartcard August 2004
The description of the EAP/Request/identity is detailed according to
the IETF RFC 2284 [1].
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Request | Identifier | Length = 5 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 01 |
+-+-+-+-+-+-+-+-+
The description of the EAP/Response/identity is detailed according
to the IETF RFC 2284 [1].
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Response | Identifier | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 01 | |
|-+-+-+-+-+-+-+-+ Identity Value |
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The second EAP Packet is the EAP/request/MD5/challenge as
represented in the IETF RFC 2284 [1].
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 80 | 00 | 00 | XX | 16 |
+--------+-----+-----+----+----+----+----+
The description of the EAP/Request/MD5/challenge is detailed
according to the IETF RFC 2284 [1].
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Request | Identifier | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 04 | |
|-+-+-+-+-+-+-+-+ MD5-Challenge.Value |
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The description of the EAP/Response/MD5/challenge is detailed
according to the IETF RFC 2284 [1].
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Urien & All Informational - Expires February 2005 29
EAP-Support in Smartcard August 2004
| Response | Identifier | Length = 16 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 04 | Type_Size=10 | |
|-+-+-+-+-+-+-+-+---------------+ MD5 Digest Value |
| |
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The third EAP Packet is the EAP success notification as represented
in the IETF RFC 2284 [1].
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 80 | 00 | 00 | 04 | 00 |
+--------+-----+-----+----+----+-- -+----+
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Success | Identifier | Length = 04 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Further information can be retrieved from the IETF draft document
[2].
15 Annex 3 (Informative) TLS support.
EAP-TLS smartcards securely store at least the following items
- Client X509 certificate
- Client Private RSA Key
- Certification Authority Public Key
According to the smartcard computing capacities, two modes are
defined in this draft (see details in annex 6)
- Mode 1: smartcard supports five functions :
- Public Key Encryption, with the server public key
- Private Key Encryption, with the client private key
- Public Key decryption, with the Certification Authority (CA)
public key
- Reading of the client's certificate
- Random Number Generator
- Mode 2: smartcard fully processes the EAP-TLS protocol
15.1 Unix Time issue.
As mentioned in [15] TLS RFC the client hello message includes a 32
byte random number, whose first 4 bytes are interpreted as the Unix
Time. As smartcard is not able to maintain a clock, this parameter
Urien & All Informational - Expires February 2005 30
EAP-Support in Smartcard August 2004
MUST be added to the EAP-TLS Start message by the Smartcard
Inyterface.
+--------+-----+-----+----+----+----+----+
|Command |Class| INS | P1 | P2 | Lc | Le |
+--------+-----+-----+----+----+----+----+
| | A0 | 80 | 00 | 00 | 0A | YY |
+--------+-----+-----+----+----+----+----+
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Code=01 | Identifier | Length = 6 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 13 | Flag=20 | Unix Time |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Unix Time |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
15.2 Fragment Maximum Size.
A single TLS record may be up to 16384 octets in length, but a TLS
message may span multiple TLS records, and a TLS certificate message
may in principle be as long as 16MB. The group of EAP-TLS messages
sent in a single round may thus be larger than the maximum RADIUS
packet size of 4096 octets, or the maximum 802 LAN frame size.
The chaining and extended length mechanisms identified in this
document provide enough extension to manage incoming and outgoing
EAP-TLS packets. Then, authenticator shall not necessary follow a
specific fragment policy regarding whether EAP-TLS is provided by
the smartcard or not.
However, in order to prevent multiple segmentation and re-assembly
operations, the maximum EAP message length of no fragmented packets
issued by smartcard SHALL be set to an adapted value.
As defined in EAP-TLS, when the smartcard receives an EAP-Request
packet with the M bit set, it MUST respond with an EAP-Response with
EAP-Type=EAP-TLS and no data. This serves as a fragment ACK.
15.3 EAP/TLS messages format.
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Code | Identifier | Length <= 240 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = 13 | Flag | TLS Message Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| TLS Message Length | TLS DATA |
Urien & All Informational - Expires February 2005 31
EAP-Support in Smartcard August 2004
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
| |
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Flags
0 1 2 3 4 5 6 7
+-+-+-+-+-+-+-+-+
|L M S R R R R R|
+-+-+-+-+-+-+-+-+
L = Length included.
M = More fragments
S = EAP-TLS start, set in an EAP-TLS Start message.
R = Reserved
15.4 Example of EAP/TLS Authentication
Smartcard Authentication Server
<- EAP-Request/
Identity
EAP-Response/
Identity (MyID) ->
<- EAP-Request/
EAP-Type=EAP-TLS
(TLS Start)
EAP-Response/
EAP-Type=EAP-TLS
TLS client_hello)->
<- EAP-Request/
EAP-Type=EAP-TLS
(TLS server_hello,
TLS certificate,
TLS certificate_request,
TLS server_hello_done)
(Fragment 1: L, M bits set)
EAP-Response/
EAP-Type=EAP-TLS ->
<- PPP EAP-Request/
EAP-Type=EAP-TLS
(Fragment 2)
EAP-Type=EAP-TLS
(TLS certificate,
TLS client_key_exchange,
TLS certificate_verify,
TLS change_cipher_spec,
TLS finished) ->
<- EAP-Request/
EAP-Type=EAP-TLS
(TLS change_cipher_spec,
Urien & All Informational - Expires February 2005 32
EAP-Support in Smartcard August 2004
TLS finished)
EAP-Response/
EAP-Type=EAP-TLS ->
<- EAP-Success
16 Annex 4 (Normative) ASN.1 BER Tag coding for the subscriber profile
information
The subscriber profile is a collection of data associated to every
identity. It can be used be the operating system of a wireless
terminal in order to get information about user credentials.
Various information (photos...) MAY be also available.
16.1 ASN.1 Subscriber Profile Encoding
16.1.1 EapID
EapID ::= OCTET STRING
The EAP-ID associated to the current identity.
16.1.2 EapType
EapType ::= INTEGER
The EAP type associated to the current identity.
16.1.3 Version
Version ::= INTEGER
The protocol version associated to an EAP type.
16.1.4 User Credential
UserCredential ::= SEQUENCE OF CredentialObject
CredentialObject ::= SEQUENCE {
ObjectValue SubscriberInformation
}
SubscriberInformation ::= CHOICE {
SSIDList [0] IMPLICIT SEQUENCE OF {
SSIDName OCTET STRING
},
SubscriberCertificate [1] IMPLICIT SEQUENCE OF {
Certificate X509Certificate
},
Urien & All Informational - Expires February 2005 33
EAP-Support in Smartcard August 2004
RootCertificate [2] IMPLICIT SEQUENCE OF {
Certificate X509Certificate
}
UserData [3] IMPLICIT SEQUENCE OF {
{ SubscriberFile UserFile
}
UserFile SEQUENCE OF {
Name OCTET STRING,
Value BIT STRING Value
}
X509Certificate an ASN.1 definition, as described in [13].
16.1.5 UserProfile
UserProfile ::= SEQUENCE {
ThisEapID EapID,
ThisEapType EapType,
ThisVersion Version,
ThisCredential UserCredential
}
16.1.6 UserProfile encoding example
30 82 xx yy
04 05 31 32 33 34 35 EapID = 1235
02 01 0D EapType = EAP-TLS
02 01 01 Version = 1
30 xx
A0 0E
04 05 61 62 63 64 65 SSID = abcde
04 05 66 67 68 69 6A SSID = fghij
A1 82 xx yy
First X509Certificate
Second X509Certificate
A2 82 xx yy
First Root X509Certificate
Second Root X509Certificate
A3 82 xx yy
30 82 zz tt
04 05 61 62 63 64 65 // Name = abcde
03 82 zz tt
File content
Urien & All Informational - Expires February 2005 34
EAP-Support in Smartcard August 2004
17 Annex 5 (Informative) APDUs exchange example
This annex shows ISO 7816 (T=0) TPDUs exchanged between the
smartcard and the authentication agent
// Select EAP application (AID= 11 22 33 44 55 66 01)
Select.request: 00 A4 04 00 07 11 22 33 44 55 66 01
Select.response: 90 00
// Get current identity
Get-Current-Identity.request: A0 18 00 00 00
Get-Current-Identity.response 98 04
// !Pin code is requested
// PIN code verification (0000)
Verify.request: A0 20 00 00 08 30 30 30 30 FF FF FF FF
Verify.response: 90 00
// Try again
Get-Current-Identity.request: A0 18 00 00 00
Get-Current-Identity.response: 6C 04
Get-Current-Identity.request A0 18 00 00 04
Get-Current-Identity.response: 61 62 63 64 90 00
// Get-Next-Identity()
Get-Next-Identity.request: A0 17 00 01 00
Get-Next-Identity.response: 6C 04
Get-Next-Identity.request: A0 17 00 01 04
Get-Next-Identity.response: 61 62 63 64 90 00
// Set-Identity()
Set-Identity.request: A0 16 00 80 04 61 62 63 64
Set-Identity.response: 90 00
// Process EAP-Packets()
EAP-Packet.request: A0 80 00 00 05 01 A5 00 05 01
EAP-Packet.response: 61 09
GetResponse.request: A0 C0 00 00 09
GetResponse.response: 02 A5 00 09 01 61 62 63 64 90 00
EAP-Packet.request A0 80 00 00 08 01 A6 00 08 04 02 12 34
EAP-Packet.response: 61 16
GetResponse.request: A0 C0 00 00 16
GetResponse.response: 02 A6 00 16 04 10 CF A5 2D CD 63 5F 5C 6D
55 B8 09 FD B7 BB EC 3C 90 00
Urien & All Informational - Expires February 2005 35
EAP-Support in Smartcard August 2004
18 Annex 6, EAP-TLS ISO7816 APDUs Trace (T=0 Protocol)
18.1 EAP-TLS session parameters
18.1.2 CA Public Key (2048 bits)
modulus:
00:a5:62:a0:41:52:9a:ec:8e:27:24:a1:0c:a2:45:
68:e3:ed:bd:3d:64:9a:7c:c2:74:5a:e2:60:fa:ac:
6d:0f:dd:4c:45:ce:9d:b9:74:4e:35:fd:74:cd:13:
63:dd:dc:ce:19:25:b9:d7:06:31:13:d7:ea:1e:54:
1a:07:36:eb:97:2f:88:19:58:c5:76:ec:f9:b3:71:
66:fa:3a:4e:94:f9:04:98:ff:b0:7f:b0:dc:af:c3:
c8:a6:35:3d:ab:d4:67:07:ff:c6:e8:f0:03:a5:f1:
5b:00:c8:8f:36:a1:f3:88:e8:23:f1:04:c6:d4:26:
af:37:ad:a2:54:83:ab:13:56:83:8e:6f:b4:3a:d3:
63:95:00:ad:ec:57:5d:95:2d:01:f5:7b:ae:6c:b6:
43:4b:da:2b:e1:ed:f4:ab:e1:75:27:0f:2e:06:5c:
42:30:b4:5e:06:59:58:e4:4b:b6:0e:ba:71:d6:1c:
a0:70:ac:b1:2c:b2:fe:6b:7d:d8:42:1d:45:9d:d5:
4a:62:06:2e:e2:dc:88:5b:8b:72:45:ac:e1:24:ea:
08:66:30:5f:8c:e6:52:12:37:70:04:b0:37:5c:09:
1e:3b:d4:97:0c:9b:41:3f:86:08:d7:db:19:cb:07:
a3:b9:cb:75:49:99:dc:20:cd:f0:db:52:19:4b:15:
f1:6d
publicExponent: 65537 (0x10001)
18.1.3 Server Public Key (1024 bits)
modulus:
00:bc:67:01:3c:b9:15:ec:12:81:e6:5a:4d:af:49:
80:1d:db:6d:5c:f3:0c:fd:2f:f6:3f:5d:37:79:29:
c7:39:1b:fd:76:6f:67:dd:0f:e9:e8:42:51:43:ba:
46:ae:95:ff:76:91:9f:30:a3:9c:45:9a:22:f2:2b:
75:66:52:97:95:c3:2f:ee:7d:cf:c9:dc:de:11:69:
a3:46:ef:e8:25:24:62:14:df:02:2b:ad:f9:83:b9:
3c:bb:a8:1c:44:c1:5a:11:39:70:1b:69:f9:95:4c:
9b:d2:fd:fa:1a:e4:01:e3:bd:6f:d0:6c:f5:85:41:
3c:28:ae:80:2b:46:70:a8:f3
publicExponent: 65537 (0x10001)
18.1.4 Client Private Key (1024 bits)
modulus: // N
00:de:7d:0e:f5:1d:17:16:c0:6f:51:b0:4c:ef:2e:
c6:ca:f4:d8:66:01:bc:7b:21:12:37:ce:dc:61:72:
f3:c8:ff:83:5c:2f:f5:2b:f8:f0:0f:bd:89:86:6a:
3f:c2:8b:3b:bd:c7:98:fd:4b:1d:67:8f:85:66:12:
74:6f:64:74:d0:31:07:46:04:ba:b1:74:70:b1:fc:
d9:42:44:f8:97:c2:74:b9:45:5c:84:15:33:ec:4a:
cb:41:d2:6e:7c:6d:bd:bc:cd:3e:64:ff:8f:33:63:
fe:06:55:69:96:c6:96:fa:17:db:f8:7f:eb:5b:fe:
00:3e:d1:8e:42:83:62:be:c3
Urien & All Informational - Expires February 2005 36
EAP-Support in Smartcard August 2004
publicExponent: 65537 (0x10001)
privateExponent:
00:9f:ad:4b:5d:d9:79:e7:a7:46:7d:6f:35:57:f7:
cf:4e:7b:f9:0f:04:b1:fc:00:99:2d:9a:76:0a:2e:
51:0e:71:6b:1a:6f:84:db:01:37:71:64:8b:5d:ff:
c5:30:df:72:89:da:c5:4f:0c:68:d7:19:67:19:01:
a7:b5:06:78:da:57:2f:2f:f6:c5:ce:75:b7:ca:9d:
b2:f8:5a:62:27:40:b2:5c:42:f3:78:fd:42:f6:1a:
56:44:a3:42:94:24:f6:37:53:fc:78:42:06:8a:1a:
0b:43:cf:f8:92:60:8d:10:61:2c:ff:d3:79:ba:78:
ed:f7:28:fb:61:dc:88:37:91
prime1: // P
00:fc:30:c8:10:41:80:f7:f2:1a:0c:28:2b:58:a0:
44:3e:01:13:91:66:4f:96:27:0e:c3:0a:4f:58:b5:
73:9a:3c:7a:fa:b9:19:8f:2b:32:8b:c8:bf:6c:77:
b3:4d:e5:71:80:e5:74:9a:76:a5:c0:41:14:81:76:
e0:9b:46:bd:db
prime2: // Q
00:e1:d9:6b:5e:41:2d:3e:b9:2a:a8:6b:6e:d0:fc:
aa:b1:df:a7:4e:90:8d:11:54:7c:0d:ea:64:d5:f5:
c1:d1:2b:02:77:b2:d2:6e:d8:93:56:ad:ee:ca:5a:
c0:92:64:4b:b8:d8:f4:a2:8c:f0:18:17:64:51:0b:
db:04:f3:3b:39
exponent1: // DP1
00:db:27:a9:34:37:38:54:3f:d7:d2:e8:b5:82:77:
03:d6:be:28:bb:1a:25:df:5e:61:bd:ac:9f:f7:7e:
f7:ce:f8:f0:06:22:04:cc:1d:c5:f7:23:a4:f6:25:
af:73:ea:08:10:f3:55:b9:45:92:14:d8:79:71:68:
55:17:9b:0a:31
exponent2: // DQ1
37:87:0e:27:d9:5c:77:6c:6d:39:85:58:74:97:7a:
9c:4b:01:c6:86:31:b8:ce:0d:c6:1a:17:fa:a6:f6:
a5:27:ae:ee:a1:0f:ad:e3:1f:ae:93:0a:ff:c3:7a:
4f:43:cb:7e:42:11:3b:99:ed:39:ef:1e:61:f2:c9:
41:99:4f:b9
coefficient: //PQ
5f:88:21:11:1f:0d:f0:cd:56:47:4f:1f:64:81:0e:
d1:02:eb:39:42:01:c7:e4:4b:b6:31:65:2a:fd:51:
11:1f:cd:3a:68:d4:e8:3c:4e:47:c1:ce:76:6b:2b:
52:bd:76:dd:71:81:76:0f:69:9a:94:c3:41:3a:2e:
c9:47:3c:e5
18.2 Full EAP-TLS trace (mode 2)
// TLS-START + GMT-UNIX-TIME
Tx: A080000000A 011400060D20 3FAA2B6A
Rx: 6150
Tx: A0C0000050 // Read Client Hello
Rx: 021400500D800000004616030100410100003D03013FAA2B6A08BDD285B43D1F
3BC9715FC9F85FC453FE58F3A9E07FF397CD65392200001600040005000A0009
Urien & All Informational - Expires February 2005 37
EAP-Support in Smartcard August 2004
006400620003000600130012006301009000
// Forward Server_Hello frag#1 1396 octets, total size = 4710 octets
// eap.request#15
Tx: A0800100F0011505740DC00000126616030112610200004603013FAA2B9BCC3D
6179E2D7E78460A2596342C5014289B753209CA02A31DEDB9142206124000089
2B16D27FEBD10B93D1EFC224C322B69B994C1A8FB2B5BD4094861A0004000B00
05A80005A50005A23082059E30820486A003020102020A613116E50000000000
03300D06092A864886F70D0101050500305231123010060A0992268993F22C64
01191602667231143012060A0992268993F22C6401191604656E737431153013
060A0992268993F22C64011916056261647261310F300D060355040313066361
77696669301E170D3033313030323135323331345A
Rx: 9000
Tx: A0800100F0170D3035313030313135323331345A3066310B3009060355040613
024652311630140603550408130D696C65206465206672616E6365310E300C06
0355040713057061726973310D300B060355040A1304656E7374310F300D0603
55040B1306696E66726573310F300D06035504031306616B6B61723130819F30
0D06092A864886F70D010101050003818D0030818902818100BC67013CB915EC
1281E65A4DAF49801DDB6D5CF30CFD2FF63F5D377929C7391BFD766F67DD0FE9
E8425143BA46AE95FF76919F30A39C459A22F22B7566529795C32FEE7DCFC9DC
DE1169A346EFE825246214DF022BADF983B93CBBA8
Rx: 9000
Tx: A0800100F01C44C15A1139701B69F9954C9BD2FDFA1AE401E3BD6FD06CF58541
3C28AE802B4670A8F30203010001A38202E4308202E0300B0603551D0F040403
0205A0304406092A864886F70D01090F04373035300E06082A864886F70D0302
02020080300E06082A864886F70D030402020080300706052B0E030207300A06
082A864886F70D030730130603551D25040C300A06082B06010505070301301D
0603551D0E04160414234B9E6578CB280E3D968C5B6C4EA0911C1A7F73301F06
03551D23041830168014E56DC55020881E3900398AF99EE0789DA4230F893081
FB0603551D1F0481F33081F03081EDA081EAA081E7
Rx: 9000
Tx: A0800100F08681B16C6461703A2F2F2F434E3D6361776966692C434E3D616B6B
6172312C434E3D4344502C434E3D5075626C69632532304B6579253230536572
76696365732C434E3D53657276696365732C434E3D436F6E6669677572617469
6F6E2C44433D62616472612C44433D656E73742C44433D66723F636572746966
69636174655265766F636174696F6E4C6973743F626173653F6F626A65637443
6C6173733D63524C446973747269627574696F6E506F696E748631687474703A
2F2F616B6B6172312E62616472612E656E73742E66722F43657274456E726F6C
6C2F6361776966692E63726C3082011306082B0601
Rx: 9000
Tx: A0800100F0050507010104820105308201013081AA06082B0601050507300286
819D6C6461703A2F2F2F434E3D6361776966692C434E3D4149412C434E3D5075
626C69632532304B657925323053657276696365732C434E3D53657276696365
732C434E3D436F6E66696775726174696F6E2C44433D62616472612C44433D65
6E73742C44433D66723F634143657274696669636174653F626173653F6F626A
656374436C6173733D63657274696669636174696F6E417574686F7269747930
Urien & All Informational - Expires February 2005 38
EAP-Support in Smartcard August 2004
5206082B060105050730028646687474703A2F2F616B6B6172312E6261647261
2E656E73742E66722F43657274456E726F6C6C2F61
Rx: 9000
Tx: A0800000C46B6B6172312E62616472612E656E73742E66725F6361776966692E
637274302106092B060104018237140204141E12005700650062005300650072
007600650072300D06092A864886F70D01010505000382010100946E33F7044A
18F16E18337D8A22A230415DF07766ED94835E8A1FCBB7B16571D6EC6A9564AA
C163383D17B223C29AB57825AE36156083249AA0A8EABED8C880D7E1EE58A301
9D04D935EA3C6427052FDE1CCB60681691436C3580439F4C592ABA6489D43ABF
EF9660EF60DA97FDA9
Rx: 6106
Tx: A0C0000006 // READ ACK#15
Rx: 021500060D009000
// Transfer Server Hello frag#2 1396 octets eap.request#16
Tx: A0800100F0011605740D40E8436722315A8D1479DCA19BFFC9F6B15A538D80E1
A0C107F079DF79DB2674DD914481C8E1B388577645C100F44F4EC3A7E077CC4B
3AC3577FD1CD0575E651FF1BCD6C716402DD83858563EC791593018CEB0BD9DB
12F4B2E8D19FC185787E1717265BA3E11E76E343D2DA8AD83C77188E4E96C049
B3F3B7BCB886BB574858FE331EE4407AA893212C171B1883A3B0EA580D000C63
0201020C5E00C43081C1310B300906035504061302555331173015060355040A
130E566572695369676E2C20496E632E313C303A060355040B1333436C617373
2031205075626C6963205072696D61727920436572
Rx: 9000
Tx: A0800100F074696669636174696F6E20417574686F72697479202D204732313A
3038060355040B1331286329203139393820566572695369676E2C20496E632E
202D20466F7220617574686F72697A656420757365206F6E6C79311F301D0603
55040B1316566572695369676E205472757374204E6574776F726B00C43081C1
310B300906035504061302555331173015060355040A130E566572695369676E
2C20496E632E313C303A060355040B1333436C6173732034205075626C696320
5072696D6172792043657274696669636174696F6E20417574686F7269747920
2D204732313A3038060355040B1331286329203139
Rx: 9000
Tx: A0800100F0393820566572695369676E2C20496E632E202D20466F7220617574
686F72697A656420757365206F6E6C79311F301D060355040B13165665726953
69676E205472757374204E6574776F726B00D43081D1310B3009060355040613
025A41311530130603550408130C5765737465726E2043617065311230100603
55040713094361706520546F776E311A3018060355040A131154686177746520
436F6E73756C74696E6731283026060355040B131F4365727469666963617469
6F6E205365727669636573204469766973696F6E312430220603550403131B54
686177746520506572736F6E616C20467265656D61
Rx: 9000
Tx: A0800100F0696C204341312B302906092A864886F70D010901161C706572736F
6E616C2D667265656D61696C407468617774652E636F6D00D23081CF310B3009
060355040613025A41311530130603550408130C5765737465726E2043617065
Urien & All Informational - Expires February 2005 39
EAP-Support in Smartcard August 2004
31123010060355040713094361706520546F776E311A3018060355040A131154
686177746520436F6E73756C74696E6731283026060355040B131F4365727469
6669636174696F6E205365727669636573204469766973696F6E312330210603
550403131A54686177746520506572736F6E616C205072656D69756D20434131
2A302806092A864886F70D010901161B706572736F
Rx: 9000
Tx: A0800100F06E616C2D7072656D69756D407468617774652E636F6D0086308183
310B3009060355040613025553312D302B060355040A13244669727374204461
7461204469676974616C2043657274696669636174657320496E632E31453043
0603550403133C46697273742044617461204469676974616C20436572746966
69636174657320496E632E2043657274696669636174696F6E20417574686F72
69747900CE3081CB310B3009060355040613025A41311530130603550408130C
5765737465726E204361706531123010060355040713094361706520546F776E
311A3018060355040A131154686177746520436F6E
Rx: 9000
Tx: A0800000C473756C74696E6731283026060355040B131F436572746966696361
74696F6E205365727669636573204469766973696F6E3121301F060355040313
1854686177746520506572736F6E616C2042617369632043413128302606092A
864886F70D0109011619706572736F6E616C2D6261736963407468617774652E
636F6D0061305F310B300906035504061302555331173015060355040A130E56
6572695369676E2C20496E632E31373035060355040B132E436C617373203320
5075626C6963205072
Rx: 6106
Tx: A0C0000006 // Read ACK#16
Rx: 021600060D009000
// Transfer Server Hello frag#3 1396 octets eap.request#17
Tx: A0800100F0011705740D40696D6172792043657274696669636174696F6E2041
7574686F726974790061305F310B300906035504061302555331173015060355
040A130E566572695369676E2C20496E632E31373035060355040B132E436C61
73732032205075626C6963205072696D6172792043657274696669636174696F
6E20417574686F726974790061305F310B300906035504061302555331173015
060355040A130E566572695369676E2C20496E632E31373035060355040B132E
436C6173732031205075626C6963205072696D61727920436572746966696361
74696F6E20417574686F7269747900C43081C1310B
Rx: 9000
Tx: A0800100F0300906035504061302555331173015060355040A130E5665726953
69676E2C20496E632E313C303A060355040B1333436C6173732033205075626C
6963205072696D6172792043657274696669636174696F6E20417574686F7269
7479202D204732313A3038060355040B13312863292031393938205665726953
69676E2C20496E632E202D20466F7220617574686F72697A656420757365206F
6E6C79311F301D060355040B1316566572695369676E205472757374204E6574
776F726B009C308199310B30090603550406130248553111300F060355040713
08427564617065737431273025060355040A131E4E
Rx: 9000
Urien & All Informational - Expires February 2005 40
EAP-Support in Smartcard August 2004
Tx: A0800100F065744C6F636B2048616C6F7A617462697A746F6E73616769204B66
742E311A3018060355040B131154616E7573697476616E796B6961646F6B3132
3030060355040313294E65744C6F636B20557A6C6574692028436C6173732042
292054616E7573697476616E796B6961646F00473045310B3009060355040613
02555331183016060355040A130F47544520436F72706F726174696F6E311C30
1A06035504031313475445204379626572547275737420526F6F740077307531
0B300906035504061302555331183016060355040A130F47544520436F72706F
726174696F6E31273025060355040B131E47544520
Rx: 9000
Tx: A0800100F04379626572547275737420536F6C7574696F6E732C20496E632E31
2330210603550403131A475445204379626572547275737420476C6F62616C20
526F6F7400C63081C3310B300906035504061302555331143012060355040A13
0B456E74727573742E6E6574313B3039060355040B13327777772E656E747275
73742E6E65742F43505320696E636F72702E206279207265662E20286C696D69
7473206C6961622E2931253023060355040B131C286329203139393920456E74
727573742E6E6574204C696D69746564313A303806035504031331456E747275
73742E6E6574205365637572652053657276657220
Rx: 9000
Tx: A0800100F043657274696669636174696F6E20417574686F7269747900B23081
AF310B30090603550406130248553110300E0603550408130748756E67617279
3111300F06035504071308427564617065737431273025060355040A131E4E65
744C6F636B2048616C6F7A617462697A746F6E73616769204B66742E311A3018
060355040B131154616E7573697476616E796B6961646F6B3136303406035504
03132D4E65744C6F636B204B6F7A6A6567797A6F692028436C61737320412920
54616E7573697476616E796B6961646F00C43081C1310B300906035504061302
555331173015060355040A130E566572695369676E
Rx: 9000
Tx: A0800000C42C20496E632E313C303A060355040B1333436C6173732032205075
626C6963205072696D6172792043657274696669636174696F6E20417574686F
72697479202D204732313A3038060355040B1331286329203139393820566572
695369676E2C20496E632E202D20466F7220617574686F72697A656420757365
206F6E6C79311F301D060355040B1316566572695369676E205472757374204E
6574776F726B0070306E310B300906035504061302555331183016060355040A
130F47544520436F72
Rx: 6106
Tx: A0C0000006 // Transfer ACK#17
RX: 021700060D009000
// Read Server Hello frag#4 550 octets eap.request#18
Tx: A0800100F0011802260D00706F726174696F6E31273025060355040B131E4754
45204379626572547275737420536F6C7574696F6E732C20496E632E311C301A
06035504031313475445204379626572547275737420526F6F74009E30819B31
0B30090603550406130248553111300F06035504071308427564617065737431
273025060355040A131E4E65744C6F636B2048616C6F7A617462697A746F6E73
616769204B66742E311A3018060355040B131154616E7573697476616E796B69
61646F6B313430320603550403132B4E65744C6F636B20457870726573737A20
28436C6173732043292054616E7573697476616E79
Urien & All Informational - Expires February 2005 41
EAP-Support in Smartcard August 2004
Rx: 9000
Tx: A0800100F06B6961646F0054305231123010060A0992268993F22C6401191602
667231143012060A0992268993F22C6401191604656E737431153013060A0992
268993F22C64011916056261647261310F300D06035504031306636177696669
00723070312B3029060355040B1322436F707972696768742028632920313939
37204D6963726F736F667420436F72702E311E301C060355040B13154D696372
6F736F667420436F72706F726174696F6E3121301F060355040313184D696372
6F736F667420526F6F7420417574686F726974790061305F31133011060A0992
268993F22C6401191603636F6D31193017060A0992
Rx: 9000
Tx: A080000046268993F22C64011916096D6963726F736F6674312D302B06035504
0313244D6963726F736F667420526F6F74204365727469666963617465204175
74686F726974790E000000
Rx: 9F00
// Transfer Smartcard Response, eap.response#18
// 1st fragment 1594 bytes - 05D6 - Code=2 id=18
// Length=1494 Type=0D Flag=C0 Size=1825
Tx: A012000000
Rx: 021805D60DC00000072116030106F10B0005E10005DE0005DB308205D7308204
BFA003020102020A61253DFF000000000006300D06092A864886F70D01010505
00305231123010060A0992268993F22C6401191602667231143012060A099226
8993F22C6401191604656E737431153013060A0992268993F22C640119160562
61647261310F300D06035504031306636177696669301E170D30333131303630
39333635395A170D3034313130353039333635395A306231123010060A099226
8993F22C6401191602667231143012060A0992268993F22C6401191604656E73
7431153013060A0992268993F22C64011916056261647261310E300C06035504
9F00
Tx: A012000000
Rx: 0313055573657273310F300D0603550403130668616A6A656830819F300D0609
2A864886F70D010101050003818D0030818902818100DE7D0EF51D1716C06F51
B04CEF2EC6CAF4D86601BC7B211237CEDC6172F3C8FF835C2FF52BF8F00FBD89
866A3FC28B3BBDC798FD4B1D678F856612746F6474D031074604BAB17470B1FC
D94244F897C274B9455C841533EC4ACB41D26E7C6DBDBCCD3E64FF8F3363FE06
556996C696FA17DBF87FEB5BFE003ED18E428362BEC30203010001A382032130
82031D300B0603551D0F0404030205A0304406092A864886F70D01090F043730
35300E06082A864886F70D030202020080300E06082A864886F70D0304020200
9F00
Tx: A012000000
Rx: 80300706052B0E030207300A06082A864886F70D0307301D0603551D0E041604
14526E170649667E12FD1EC69D4CC8A02640B75928301706092B060104018237
1402040A1E080055007300650072301F0603551D23041830168014E56DC55020
881E3900398AF99EE0789DA4230F893081FB0603551D1F0481F33081F03081ED
A081EAA081E78681B16C6461703A2F2F2F434E3D6361776966692C434E3D616B
6B6172312C434E3D4344502C434E3D5075626C69632532304B65792532305365
Urien & All Informational - Expires February 2005 42
EAP-Support in Smartcard August 2004
7276696365732C434E3D53657276696365732C434E3D436F6E66696775726174
696F6E2C44433D62616472612C44433D656E73742C44433D66723F6365727469
9F00
Tx: A012000000
Rx: 6669636174655265766F636174696F6E4C6973743F626173653F6F626A656374
436C6173733D63524C446973747269627574696F6E506F696E74863168747470
3A2F2F616B6B6172312E62616472612E656E73742E66722F43657274456E726F
6C6C2F6361776966692E63726C3082011306082B060105050701010482010530
8201013081AA06082B0601050507300286819D6C6461703A2F2F2F434E3D6361
776966692C434E3D4149412C434E3D5075626C69632532304B65792532305365
7276696365732C434E3D53657276696365732C434E3D436F6E66696775726174
696F6E2C44433D62616472612C44433D656E73742C44433D66723F6341436572
9F00
Tx: A012000000
Rx: 74696669636174653F626173653F6F626A656374436C6173733D636572746966
69636174696F6E417574686F72697479305206082B0601050507300286466874
74703A2F2F616B6B6172312E62616472612E656E73742E66722F43657274456E
726F6C6C2F616B6B6172312E62616472612E656E73742E66725F636177696669
2E63727430290603551D2504223020060A2B0601040182370A030406082B0601
050507030406082B06010505070302302F0603551D1104283026A024060A2B06
0104018237140203A0160C1468616A6A65684062616472612E656E73742E6672
300D06092A864886F70D0101050500038201010013A233AA6EDB4282A69EF9D0
9FD6
Tx: A0120000D6
Rx: 23D51F32FD0B97AF03C4BACD6B7ED5C155110EBACC3F0FAD6D853DEE845CC33D
0E9D8ECC7514295F854D16F6409DFEB61A60C9A1EF0BC09AD3C1A93BEE546B2D
F9DBAB8AD9A90AAB5CEE35FF6751275873D1C5093339B4ADEA0F40C54754DAE7
461966322B5772B460B7FA2F5985D496C52CAF7456DF2D78E4DE9B1C48F2ACB9
87BA9BDE3D1624645330F0FBF0103C547DA547C1F03B1C2BB5CDD06D38D2ABFA
FD06387235E8E49DEDCB7E2B7E80A15B1317A04ECF1ADBF475AC82D67514A6EF
5EBFFAD40D5D5F7395179677703BFC3A9D34623BD28E9000
// Read ACK#19
Tx: A080000006011900060D00
Rx: 9F00
// Transfer 2nd fragment, 347 bytes, Code=2 id=19 Length=347
// Type=0D Flag=00
//
Tx: A012000000
Rx: 0219015B0D00C9186A1078130652552D5CFEF1B6CDBA5197910A4C87CAD1F92F
A7EB7A0B1000008200808FD83C571FE7D71E76A86405BDBC95BA4BD67A48F4BD
8084F4F944C1ACDF1FACF85FFC111BE3CE8AFFB48F6DA6C5477761A34C7889CB
148DA42141BBC1E942BAC8752B7FD255574F654DBED3DEF89EE0F79BEEBF43DC
737F158F99C17A2461B2C5D5E2A75FCBBD7F5275AD781127300E46EC61408EF2
BABC200F85363926301E0F0000820080BDD2429D21DAE14D9727D2F715BF30A6
5E61C7608D5C0B6035BCCC014BAFE24BB98550AF86E13B6D8D371E5A922D20DD
338B563B7E9C9AF0EF9110C77B468A651915575D348A7D29B89CC5A8D4B8AA71
Urien & All Informational - Expires February 2005 43
EAP-Support in Smartcard August 2004
9F5B
Tx: A01200005B
Rx: 5D53E340E6E7AD6B6E3438F358B870C5DA5E61C45EE5E3F9454219F48A34CC98
10A946F0C652675E3CA81ABA229309B71403010001011603010020C97EBCFF0C
20271CAE21FAA80898278660D393CB4C640390CDEB14592A0392F79000
// Transfer Server last message, eap request #1A
Tx: A080000035011A00350D800000002B14030100010116030100209255D2089E41
30B5984AF43B604A108AA11376F368E71BCF81EEFEBC00289C1C
Rx: 6106
// Read ACK#1A
Tx: A0C0000006
Rx: 021A00060D009000
// Read PMK
Tx: A0A6000040
Rx: 8F0A6773E9C0264015861CE712C9A692844A28B6D5641E4D90D38994A94A2C6D
B7CD0C7DCBD83D45B2DB1D6598FE696A10176E21B62D8A33AD2970A560CE5E84
9000
//
18.3 EAP-TLS mode1 ISO7816 trace (T=0 protocol)
The EAP-TLS smartcard mode1, supports five functions
- Public Key Encryption, with the server public key
- Private Key Encryption, with the client private key
- Public Key decryption, with the Certification Authority (CA)
public key
- Reading of the client's certificate
- Random Number Generator
In this mode the EAP-TLS smartcard interface doesn't provide RSA
functions. Furthermore all client's parameters (RSA keys and
certificate) are stored in the smartcard.
// Set-Identity (abc TLS) type=TLS
Tx: A016800003616263
Rx: 9000
// RANDOM Number Generator
Tx: A060 0200 1C // 28 bytes
Rx: 08BDD285B43D1F3BC9715FC9F85FC453FE58F3A9E07FF397CD653922
// Set Server Public KEY (FCT = Initialize + Public-Encrypt)
Tx: A0604800870080bc67013cb915ec1281e65a4daf49801ddb6d5cf30cfd2ff63f
5d377929c7391bfd766f67dd0fe9e8425143ba46ae95ff76919f30a39c459a22
f22b7566529795c32fee7dcfc9dcde1169a346efe825246214df022badf983b9
cbba81c44c15a1139701b69f9954c9bd2fdfa1ae401e3bd6fd06cf585413c28a
e802b4670a8f30003010001
Urien & All Informational - Expires February 2005 44
EAP-Support in Smartcard August 2004
// Pre-Master Secret Encryption with the Server Public Key
// FCT = Do-Final + Public-Encrypt
Tx: A0600800300301c5a68fb75123308e2ddbb27b63fe021e8724e7bc5c17078b3b
3f90ba00d128f80b07ad786b6de36e5f94ffdfeb49
RX: 6180
TX: 8fd83c571fe7d71e76a86405bdbc95ba4bd67a48f4bd8084f4f944c1acdf1fac
f85ffc111be3ce8affb48f6da6c5477761a34c7889cb148da42141bbc1e942ba
c8752b7fd255574f654dbed3def89ee0f79beebf43dc737f158f99c17a2461b2
c5d5e2a75fcbbd7f5275ad781127300e46ec61408ef2babc200f85363926301e
// Private Encrypt with Client Private Key
// FCT = Do-Final + Private-Encrypt
// (Client Certificate Verify)
Tx: A0604002249c0326e6d899fa802cc981b86e9b65f41234db8e2456e5f3dccd68
a34f25b4e72153f50e
Rx: 6180
Tx: A0C0000080
Rx: bdd2429d21dae14d9727d2f715bf30a65e61c7608d5c0b6035bccc014bafe24b
b98550af86e13b6d8d371e5a922d20dd338b563b7e9c9af0ef9110c77b468a65
1915575d348a7d29b89cc5a8d4b8aa715d53e340e6e7ad6b6e3438f358b870c5
da5e61c45ee5e3f9454219f48a34cc9810a946f0c652675e3ca81aba229309b7
// Public Decrypt#1 with CA public key, first byte
// FCT = Do-Final + Index#1 + Public-Decrypt
// Checking of server certificate
Tx: A061 1B 00 01 13
Rx: 9000
// Public Decrypt#1 (with CA public key, 255 bytes)
Tx: A0601A00FFA233AA6EDB4282A69EF9D023D51F32FD0B97AF03C4BACD6B7ED5C1
55110EBACC3F0FAD6D853DEE845CC33D0E9D8ECC7514295F854D16F6409DFEB6
1A60C9A1EF0BC09AD3C1A93BEE546B2DF9DBAB8AD9A90AAB5CEE35FF67512758
73D1C5093339B4ADEA0F40C54754DAE7461966322B5772B460B7FA2F5985D496
C52CAF7456DF2D78E4DE9B1C48F2ACB987BA9BDE3D1624645330F0FBF0103C54
7DA547C1F03B1C2BB5CDD06D38D2ABFAFD06387235E8E49DEDCB7E2B7E80A15B
1317A04ECF1ADBF475AC82D67514A6EF5EBFFAD40D5D5F7395179677703BFC3A
9D34623BD28EC9186A1078130652552D5CFEF1B6CDBA5197910A4C87CAD1F92F
A7EB7A0B
Rx: 6123
Tx: A0C0000023 // Certificate Hash
Rx: 3021300906052B0E03021A0500041429A563710F25832AFB692E44F4B9AFF36F
BE91A79000
// Read Client Certificate
Tx: A060000000 // Certificate 1st fragment
Rx: 308205D7308204BFA003020102020A61253DFF000000000006300D06092A8648
86F70D0101050500305231123010060A0992268993F22C640119160266723114
3012060A0992268993F22C6401191604656E737431153013060A0992268993F2
2C64011916056261647261310F300D06035504031306636177696669301E170D
3033313130363039333635395A170D3034313130353039333635395A30623112
3010060A0992268993F22C6401191602667231143012060A0992268993F22C64
01191604656E737431153013060A0992268993F22C6401191605626164726131
Urien & All Informational - Expires February 2005 45
EAP-Support in Smartcard August 2004
0E300C060355040313055573657273310F300D0603550403130668616A6A6568
9F00
Tx: A012000000 // Certificate 2nd fragment
Rx: 30819F300D06092A864886F70D010101050003818D0030818902818100DE7D0E
F51D1716C06F51B04CEF2EC6CAF4D86601BC7B211237CEDC6172F3C8FF835C2F
F52BF8F00FBD89866A3FC28B3BBDC798FD4B1D678F856612746F6474D0310746
04BAB17470B1FCD94244F897C274B9455C841533EC4ACB41D26E7C6DBDBCCD3E
64FF8F3363FE06556996C696FA17DBF87FEB5BFE003ED18E428362BEC3020301
0001A38203213082031D300B0603551D0F0404030205A0304406092A864886F7
0D01090F04373035300E06082A864886F70D030202020080300E06082A864886
F70D030402020080300706052B0E030207300A06082A864886F70D0307301D06
9F00
Tx: A012000000 // Certificate 3rd fragment
Rx: 03551D0E04160414526E170649667E12FD1EC69D4CC8A02640B7592830170609
2B0601040182371402040A1E080055007300650072301F0603551D2304183016
8014E56DC55020881E3900398AF99EE0789DA4230F893081FB0603551D1F0481
F33081F03081EDA081EAA081E78681B16C6461703A2F2F2F434E3D6361776966
692C434E3D616B6B6172312C434E3D4344502C434E3D5075626C69632532304B
657925323053657276696365732C434E3D53657276696365732C434E3D436F6E
66696775726174696F6E2C44433D62616472612C44433D656E73742C44433D66
723F63657274696669636174655265766F636174696F6E4C6973743F62617365
9F00
Tx: A012000000 // Certificate 4th fragment
Rx: 3F6F626A656374436C6173733D63524C446973747269627574696F6E506F696E
748631687474703A2F2F616B6B6172312E62616472612E656E73742E66722F43
657274456E726F6C6C2F6361776966692E63726C3082011306082B0601050507
010104820105308201013081AA06082B0601050507300286819D6C6461703A2F
2F2F434E3D6361776966692C434E3D4149412C434E3D5075626C69632532304B
657925323053657276696365732C434E3D53657276696365732C434E3D436F6E
66696775726174696F6E2C44433D62616472612C44433D656E73742C44433D66
723F634143657274696669636174653F626173653F6F626A656374436C617373
9F00
Tx: A012000000 // Certificate 5th fragment
Rx: 3D63657274696669636174696F6E417574686F72697479305206082B06010505
0730028646687474703A2F2F616B6B6172312E62616472612E656E73742E6672
2F43657274456E726F6C6C2F616B6B6172312E62616472612E656E73742E6672
5F6361776966692E63727430290603551D2504223020060A2B0601040182370A
030406082B0601050507030406082B06010505070302302F0603551D11042830
26A024060A2B060104018237140203A0160C1468616A6A65684062616472612E
656E73742E6672300D06092A864886F70D0101050500038201010013A233AA6E
DB4282A69EF9D023D51F32FD0B97AF03C4BACD6B7ED5C155110EBACC3F0FAD6D
9FDB
Tx: A0120000DB // Certificate 6th and last fragment
Rx: 853DEE845CC33D0E9D8ECC7514295F854D16F6409DFEB61A60C9A1EF0BC09AD3
C1A93BEE546B2DF9DBAB8AD9A90AAB5CEE35FF6751275873D1C5093339B4ADEA
0F40C54754DAE7461966322B5772B460B7FA2F5985D496C52CAF7456DF2D78E4
DE9B1C48F2ACB987BA9BDE3D1624645330F0FBF0103C547DA547C1F03B1C2BB5
CDD06D38D2ABFAFD06387235E8E49DEDCB7E2B7E80A15B1317A04ECF1ADBF475
AC82D67514A6EF5EBFFAD40D5D5F7395179677703BFC3A9D34623BD28EC9186A
1078130652552D5CFEF1B6CDBA5197910A4C87CAD1F92FA7EB7A0B9000
Urien & All Informational - Expires February 2005 46
EAP-Support in Smartcard August 2004
19 References
[1] L. Blunk, J. Vollbrecht, "PPP Extensible Authentication Protocol
(EAP)", RFC 2284, March 1998. (NORMATIVE)
[2] EAP SIM Authentication, draft-haverinen-pppext-eap-sim-13.txt.
[3] GSM Technical Specification GSM 11.11. Digital cellular
telecommunications system (Phase 2+); Specification of the
Subscriber Identity Module - Mobile Equipment (SIM - ME)
[4] Part 11: Wireless LAN Medium Access Control (MAC) and Physical
Layer (PHY) Specifications
[5] Standards for Local and Metropolitan Area Networks: Standard for
Port based Network Access Control.
[6] "The Network Access Identifier" RFC 2486
[7] "Can you Clone a GSM Smartcard (SIM)? " From Charles Brookson
Chairman GSM Association Security Group
[8] Part 11: Wireless Medium Access Control (MAC) and physical layer
(PHY) specifications: Specification for Enhanced Security
[9] ASN.1 standard 2002 edition ISO/IEC 8825.1.
http://asn1.elibel.tm.fr/en/standards/index.htm
[10] Extensible Markup Language (XML) 1.0 (Second Edition), W3C
Recommendation 6 October 2000
[11] B. Aboba, D. Simon, EAP TLS Authentication Protocol RFC 2716,
October 1999.
[12] H. Andersson, S. Josefsson, G. Zorn, D. Simon, A. Palekar,
"Protected EAP Protocol (PEAP)", draft-josefsson-pppext-eap-tls-eap-
05.txt, work-in-progress, September 2002. (INFORMATIVE)
[13] PKCS #6: Extended-Certificate Syntax Standard, An RSA
Laboratories Technical Note, Version 1.5, Revised November 1, 1993.
[14] RFC 2284 bis, draft-ietf-eap-rfc2284bis-08.txt
[15] T.Dierks, C.Allen, RFC 2246, "The TLS Protocol Version 1.0",
January 1999.
Urien & All Informational - Expires February 2005 47
EAP-Support in Smartcard August 2004
20 Author's Addresses
Pascal Urien
ENST
46 rue Barrault
75013 Paris Phone: NA
France Email: Pascal.Urien@enst.fr
Augustin J. Farrugia
Impasse des CAMEGIERS Phone: NA
Ceyreste, 13600 France Email: afarrugia@csi.com
Max de Groot
Gemplus
Avenue du Pic de Bertagne
BP 100, 13881 Gemenos Phone: NA
France Email: max.de-groot@gemplus.com
Guy Pujolle
LIP6 - University Paris 6
8 rue Capitaine Scott Phone: NA
Paris 75015 France Email: Guy.Pujolle@lip6.fr
Jorge Abellan
Axalto.
50, Av Jean Jaures Phone: +33 1 46 00 59 33
Montrouge 92542 France Email: Jorge.abellan@slb.com
Urien & All Informational - Expires February 2005 48
EAP-Support in Smartcard August 2004
Intellectual Property Statement
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed
to pertain to the implementation or use of the technology described
in this document or the extent to which any license under such
rights might or might not be available; nor does it represent that
it has made any independent effort to identify any such rights.
Information on the IETF's procedures with respect to rights in IETF
Documents can be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use
of such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository
at http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at ietf-
ipr@ietf.org.
Disclaimer of Validity
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE
REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE
INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Copyright Statement
Copyright (C) The Internet Society (2004). This document is subject
to the rights, licenses and restrictions contained in BCP 78, and
except as set forth therein, the authors retain all their rights.
Acknowledgment
Funding for the RFC Editor function is currently provided by the
Internet Society.
Urien & All Informational - Expires February 2005 49
| PAFTECH AB 2003-2026 | 2026-04-24 01:12:39 |