One document matched: draft-tschofenig-lwig-tls-minimal-01.txt
Differences from draft-tschofenig-lwig-tls-minimal-00.txt
Network Working Group H. Tschofenig
Internet-Draft Nokia Siemens Networks
Intended status: Standards Track J. Gilger
Expires: April 25, 2013 RWTH Aachen University
October 22, 2012
A Minimal (Datagram) Transport Layer Security Implementation
draft-tschofenig-lwig-tls-minimal-01.txt
Abstract
Transport Layer Security (TLS) is a widely used security protocol
that offers communication security services at the transport layer.
The initial design of TLS was focused on the protection of
applications running on top of the Transmission Control Protocol
(TCP), and was a good match for securing the Hypertext Transfer
Protocol (HTTP). Subsequent standardization efforts lead to the
publication of Datagram Transport Layer Security (DTLS), which added
the User Datagram Protocol (UDP), and the Datagram Congestion Control
Protocol (DCCP). The Stream Control Transmission Protocol (SCTP), as
a more recent connection-oriented transport protocol, also benefits
from TLS support.
TLS can be customized in a variety of ways and every feature has a
certain cost. To offer input for implementers and system architects
this document illustrates the impact each selected TLS features has
on the overall code size.
Status of this Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on April 25, 2013.
Copyright Notice
Tschofenig & Gilger Expires April 25, 2013 [Page 1]
Internet-Draft Minimal TLS October 2012
Copyright (c) 2012 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Communication Relationships . . . . . . . . . . . . . . . . . 5
3. Design Decisions . . . . . . . . . . . . . . . . . . . . . . . 7
4. Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5. Security Considerations . . . . . . . . . . . . . . . . . . . 9
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 10
7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 11
8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8.1. Normative References . . . . . . . . . . . . . . . . . . . 12
8.2. Informative References . . . . . . . . . . . . . . . . . . 12
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 14
Tschofenig & Gilger Expires April 25, 2013 [Page 2]
Internet-Draft Minimal TLS October 2012
1. Introduction
The IETF published three versions of Transport Layer Security: TLS
Version 1.0 [RFC2246], TLS Version 1.1 [RFC4346], and TLS Version 1.2
[RFC5246]. Section 1.1 of [RFC4346] explains the differences between
Version 1.0 and Version 1.1; those are small security improvements,
including the usage of an explicit initialization vector to protect
against cipher-block-chaining attacks, which all have little impact
for the size of the code. Section 1.2 of [RFC5246] describes the
differences between Version 1.1 and Version 1.2. TLS 1.2 introduces
a couple of major changes with impact to size of an implementation.
In particular, prior TLS versions hardcoded the MD5/SHA-1 combination
in the pseudorandom function (PRF). As a consequence, any TLS
Version 1.0 and Version 1.1 implementation had to have MD5 and SHA-1
code even if the remaining cryptographic primitives used other
algorithms. With TLS Version 1.2 the two had been replaced with
cipher-suite-specified PRFs. In addition, the TLS extensions
definition [RFC6066] and various AES ciphersuites [RFC3268] got
merged into the TLS Version 1.2 specification.
All three TLS specifications list a mandatory-to-implement
ciphersuite: for TLS Version 1.0 this was
TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA, for TLS Version 1.1 it was
TLS_RSA_WITH_3DES_EDE_CBC_SHA, and for TLS Version 1.2 it is
TLS_RSA_WITH_AES_128_CBC_SHA. There is, however, an important
qualification to these compliance statements, namely that they are
only valid in the absence of an application profile standard
specifying otherwise.
All TLS versions offer a separation between authentication and key
exchange and bulk data protection. The former is more costly
performance- and message-wise. The details of the authentication and
key exchange, using the TLS Handshake, vary with the chosen
ciphersuite. With new ciphersuites the TLS feature-set can easily be
enhanced, in case the already large collection of ciphersuites, see
[TLS-IANA], does not match the requirements.
Once the TLS Handshake has been successfully completed the necessary
keying material and parameters are setup for usage with the TLS
Record Layer, which is responsible for bulk data protection. The TLS
Record Layer could be compared with the IPsec AH and IPsec ESP while
the Handshake protocol can be compared with the Internet Key Exchange
Version 2 (IKEv2). The provided security of the TLS Record Layer
depends also, but not only, on the chosen ciphersuite algorithms;
NULL encryption ciphersuites, like those specified in RFC 4785
[RFC4785], offer only integrity- without confidentiality-protection.
Example ciphersuites for the TLS Record Layer are RC4 with SHA-1,
AES-128 with SHA-1, AES-256 with SHA-1, RC4 with SHA-1, RC4 with MD5
Tschofenig & Gilger Expires April 25, 2013 [Page 3]
Internet-Draft Minimal TLS October 2012
It is worth mentioning that TLS may also be used without the TLS
Record Layer. This has, for example, been exercised with the work on
the framework for establishing a Secure Real-time Transport Protocol
(SRTP) security context using the Datagram Transport Layer Security
(DTLS [RFC4347]) protocol (DTLS-SRTP [RFC5763]).
Tschofenig & Gilger Expires April 25, 2013 [Page 4]
Internet-Draft Minimal TLS October 2012
2. Communication Relationships
A security solution is strongly influenced by the communication
relationships [RFC4101], which will have an impact on the code size.
Having a good understanding of these relationships will be essential.
Consider the following scenario where a smart meter transmits its
energy readings to other parties. The public utility has to ensure
that the meter readings it obtained can be attributed to a specific
meter in a household. It is simply not acceptable for public utility
to have any meter readings in transit or by a rogue endpoint
(particularly if the attack leads to a disadvantage, for example
financial loss, for the utility). Users in a household may want to
ensure that only certain parties are able to read their meter;
privacy concerns come to mind.
In this example, a sensor may only ever need to talk to servers of a
specific utility or even only to a single pre-configured server.
Clearly, some information has to be pre-provisioned into the device
to ensure the desired behavior to talk only to selected servers. The
meter may come pre-configured with the domain name and certificate
belonging to the utility. The device may, however, also be
configured to accept one or multiple server certificates. It may
even be pre-provisioned with the server's raw public key, or a shared
secret instead of relying on certificates.
Lowering the flexibility decreases the implementation overhead. TLS-
PSK [RFC4279], if shared secrets are used, or raw public keys used
with TLS [I-D.ietf-tls-oob-pubkey] require fewer lines of code than
employing X.509 certificate, as it will be explained later in this
document. A decision for constraining the client-side TLS
implementation, for example by offering only a single ciphersuite,
has to be made in awareness of what functionality will be available
on the TLS server-side. In certain communication environments it may
be easy to influence both communication partners while in other cases
the existing deployment needs to be taken into consideration.
To illustrate another example, consider an Internet radio, which
allows a user to connect to available radio stations. A device like
this will be more demanding than an IP-enabled scale that only
connects to the single Web server offered by the device manufacturer.
A threat assessment may even lead to the conclusion that TLS support
is not necessary at all.
Consider the following extension to our earlier scenario where the
meter is attached to a home WLAN network and the interworking with
WLAN security mechanisms need to be taken care of. On top of the
link layer authentication, a transport layer or application layer
Tschofenig & Gilger Expires April 25, 2013 [Page 5]
Internet-Draft Minimal TLS October 2012
security mechanism needs to be implemented. Quite likely the
security mechanisms will be different due to the different credential
requirements. While there is a possibility for re-use of
cryptographic libraries (such as the SHA-1, MD5, or HMAC) the overall
code footprint will very likely be larger.
Tschofenig & Gilger Expires April 25, 2013 [Page 6]
Internet-Draft Minimal TLS October 2012
3. Design Decisions
To evaluate the required TLS functionality a couple of high level
design decisions have to be made:
o What type of protection for the data traffic is required? Is
confidentiality protection in addition to integrity protection
required? Many TLS ciphersuites also provide a variant for NULL
encryption. If confidentiality protection is required, a
carefully chosen set of algorithms may have a positive impact on
the code size. For example, the RC4 stream cipher code size is
1,496 bytes compared to 7,096 bytes for AES usage. Re-use of
crypto-libraries (within TLS but also among the entire protocol
stack) will also help to reduce the overall code size.
o What functionality is available in hardware? For example, certain
hardware platforms offer support for a random number generator as
well as cryptographic algorithms (e.g., AES). These functions can
be re-used and allow to reduce the amount of required code.
o What credentials for client and server authentication are
required: passwords, pre-shared secrets, certificates, raw public
keys (or a mixture of them)? Is certificate handling necessary?
If not, then the ASN.1 library as well as the certificate parsing
and processing can be omitted. If pre-shared secrets are used
then the big integer implementation can be omitted.
o What TLS version and what TLS features, such as session
resumption, can or have to be used?
o Is necessary to design only the client-side TLS stack, or to
provide the server-side implementation as well?
o Is it possible to hardwire credentials into the code rather than
loading them from storage? If so, then no file handling or
parsing of the credentials is needed and the credentials are
already available in form that they can be used within the TLS
implementation.
Tschofenig & Gilger Expires April 25, 2013 [Page 7]
Internet-Draft Minimal TLS October 2012
4. Conclusion
The IAB published a document, RFC 5218 [RFC5218], on the success
criteria for protocols. A "wildly successful" protocol far exceeds
its original goals, in terms of purpose (being used in scenarios far
beyond the initial design), in terms of scale (being deployed on a
scale much greater than originally envisaged), or both. TLS is an
example of such a wildly successful protocol. It can be tailored to
fit the needs of a specific deployment environment. This
customization property offers the basis for a relatively small code
footprint. The communication model and the security goals will,
however, ultimately decide about the resulting code size; this is not
only true for TLS but for every security solution.
More flexibility and more features will translate to a bigger
footprint. Generic complaints about the large size of TLS stacks are
not useful and should be accompanied by a description of the assumed
functionality. To support the author's opinion this position paper
provides information about the amount of required code for various
functions and considers most recent work from the IETF TLS working
group for the support of raw public keys.
The author is convinced that TLS is a suitable security protocol
(with the standardized extensions) for usage in many smart object
deployments. Only minor extensions, as currently being developed in
the IETF TLS working group, are needed to support an even larger set
of use cases. There are, however, cases where the security goals ask
for a security solution other than TLS. With the wide range of
embedded applications it is impractical to design for a single
security architecture or even a single communication architecture.
Tschofenig & Gilger Expires April 25, 2013 [Page 8]
Internet-Draft Minimal TLS October 2012
5. Security Considerations
This document discusses various design aspects for reducing the
footprint of TLS implementations. As such, it is entirely about
security.
Tschofenig & Gilger Expires April 25, 2013 [Page 9]
Internet-Draft Minimal TLS October 2012
6. IANA Considerations
This document does not contain actions for IANA.
Tschofenig & Gilger Expires April 25, 2013 [Page 10]
Internet-Draft Minimal TLS October 2012
7. Acknowledgements
The author would like to thank the participants of the Smart Object
Security workshop, March 2012.
Tschofenig & Gilger Expires April 25, 2013 [Page 11]
Internet-Draft Minimal TLS October 2012
8. References
8.1. Normative References
[RFC2246] Dierks, T. and C. Allen, "The TLS Protocol Version 1.0",
RFC 2246, January 1999.
[RFC4346] Dierks, T. and E. Rescorla, "The Transport Layer Security
(TLS) Protocol Version 1.1", RFC 4346, April 2006.
[RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security
(TLS) Protocol Version 1.2", RFC 5246, August 2008.
[RFC4347] Rescorla, E. and N. Modadugu, "Datagram Transport Layer
Security", RFC 4347, April 2006.
8.2. Informative References
[RFC6066] Eastlake, D., "Transport Layer Security (TLS) Extensions:
Extension Definitions", RFC 6066, January 2011.
[RFC3268] Chown, P., "Advanced Encryption Standard (AES)
Ciphersuites for Transport Layer Security (TLS)",
RFC 3268, June 2002.
[RFC5763] Fischl, J., Tschofenig, H., and E. Rescorla, "Framework
for Establishing a Secure Real-time Transport Protocol
(SRTP) Security Context Using Datagram Transport Layer
Security (DTLS)", RFC 5763, May 2010.
[RFC4785] Blumenthal, U. and P. Goel, "Pre-Shared Key (PSK)
Ciphersuites with NULL Encryption for Transport Layer
Security (TLS)", RFC 4785, January 2007.
[RFC4279] Eronen, P. and H. Tschofenig, "Pre-Shared Key Ciphersuites
for Transport Layer Security (TLS)", RFC 4279,
December 2005.
[I-D.ietf-tls-oob-pubkey]
Wouters, P., Gilmore, J., Weiler, S., Kivinen, T., and H.
Tschofenig, "Out-of-Band Public Key Validation for
Transport Layer Security", draft-ietf-tls-oob-pubkey-04
(work in progress), July 2012.
[RFC5218] Thaler, D. and B. Aboba, "What Makes For a Successful
Protocol?", RFC 5218, July 2008.
[RFC4101] Rescorla, E. and IAB, "Writing Protocol Models", RFC 4101,
Tschofenig & Gilger Expires April 25, 2013 [Page 12]
Internet-Draft Minimal TLS October 2012
June 2005.
[TLS-IANA]
IANA, "Transport Layer Security (TLS) Parameters: http://
www.iana.org/assignments/tls-parameters/
tls-parameters.xml", Oct 2012.
Tschofenig & Gilger Expires April 25, 2013 [Page 13]
Internet-Draft Minimal TLS October 2012
Authors' Addresses
Hannes Tschofenig
Nokia Siemens Networks
Linnoitustie 6
Espoo, 02600
Finland
Phone: +358 (50) 4871445
Email: Hannes.Tschofenig@gmx.net
URI: http://www.tschofenig.priv.at
Johannes Gilger
RWTH Aachen University
Mies-van-der-Rohe-Str. 15
Aachen, 52074
Germany
Phone: +49 (0)241 80 20 781
Email: Gilger@ITSec.RWTH-Aachen.de
Tschofenig & Gilger Expires April 25, 2013 [Page 14]
| PAFTECH AB 2003-2026 | 2026-04-22 08:16:26 |