One document matched: draft-narten-ipv6-3177bis-48boundary-01.txt
Differences from draft-narten-ipv6-3177bis-48boundary-00.txt
INTERNET-DRAFT Thomas Narten
IBM
<draft-narten-ipv6-3177bis-48boundary-01.txt> Geoff Huston
APNIC
Lea Roberts
Stanford University
March 6, 2006
IPv6 Address Allocation to End Sites
<draft-narten-ipv6-3177bis-48boundary-01.txt>
Status of this Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress".
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/1id-abstracts.html
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html
This Internet-Draft expires in six months.
Abstract
RFC 3177 argued that in IPv6, end sites should be assigned /48 blocks
in most cases. The Regional Internet Registries (RIRs) adopted those
recommendations in 2002 and they have been in effect ever since.
This document revisits and updates the IAB/IESG recommendations on
the assignment of IPv6 address space to end sites. The exact choice
of how much address space to assign end sites is a policy issue under
the purview of the RIRs, subject to IPv6 architectural
draft-narten-ipv6-3177bis-48boundary-01.txt [Page 1]
INTERNET-DRAFT March 6, 2006
considerations. This document reviews those architectural
considerations and reiterates that changing the /48 recommendation is
one of policy, and has minimal impact on the IPv6 architecture and on
IETF Standards.
This document obsoletes RFC 3177 and reclassifies it as historic.
Contents
Status of this Memo.......................................... 1
1. Introduction............................................. 2
2. On /48 Assignments to End Sites.......................... 3
3. Other RFC 3177 considerations............................ 4
4. Impact on IPv6 Standards................................. 4
4.1. RFC3056: Connection of IPv6 Domains via IPv4 Clouds. 4
4.2. IPv6 Multicast Addressing........................... 4
5. Security Considerations.................................. 5
6. IANA Considerations...................................... 5
7. Acknowledgments.......................................... 5
8. Normative References..................................... 5
9. Informative References................................... 5
10. Author's Address...................................... 6
1. Introduction
RFC 3177 [RFC3177] called for a default end site IPv6 assignment size
of /48. Subsequently, the RIRs developed and adopted IPv6 address
assignment and allocation policies consistent with the RFC 3177
recommendations [RIR-IPV6]. Additional history and discussion of IPv6
address policy and its long-term implications can be found in
[IPV6-HISTORY].
This document performs two functions:
1) It revisits the RFC 3177 recommendations and concludes that the
default IPv6 assignment size could be changed from /48 to some
other value (e.g., /56) with essentially no impact on existing
draft-narten-ipv6-3177bis-48boundary-01.txt [Page 2]
INTERNET-DRAFT March 6, 2006
IPv6 standards or implementations.
2) It obsoletes RFC 3177 and reclassifies it historic.
2. On /48 Assignments to End Sites
Looking back at some of the original motivations behind the /48
recommendation [RFC 3177], one overriding concern was to ensure that
end sites could easily obtain sufficient address space without having
to "jump through hoops" to do so. For example, if someone felt they
needed more space, just the act of asking would at some level be
sufficient justification. As a comparison point, in IPv4, typical
home users are given a single public IP address (though even this is
not always assured), but getting any more than one address is
typically significantly more expensive either in terms of the
justification effort needed to obtain additional addresses, or in the
actual monthly service cost. (It should be noted that an end-user
additional "cost" for obtaining more than one address is difficult to
justify by the actual effective per-address cost charged by the RIRs,
but providing additional addresses is frequently only available as
part of a different type or "higher grade" of service, for which an
additional charge is levied.) Thus, an important goal in IPv6 is to
significantly change the default and minimal end site assignment,
from "a single address" to "multiple networks".
In IPv6, a site may have multiple prefixes in use, including multiple
public prefixes from ISPs and site local addresses [SITE-LOCAL].
Thus, another concern is that managing the addressing plan for a site
is simplified if the same subnet numbering scheme can be used for all
prefixes. In particular, renumbering from a larger set of "subnet
bits" into a smaller set is particularly painful, as it it can
require making changes to the network itself (e.g., collapsing
links). In contrast, renumbering a site into a prefix that has the
same number (or more) of subnet bits is more straightforward, because
only the top-level bits of the address need to change. Thus, another
goal of the RFC 3177 recommendation is to ensure that upon
renumbering, one does not have to deal with renumbering into a
smaller subnet size.
It should be noted that similar arguments apply to the management of
zone files in the DNS. In particular, managing the reverse (ip6.arpa)
tree is simplified when all links are numbered using the same subnet
ids.
The above concerns were met by the original /48 recommendation, but
could also be realized through a more conservative approach. A key
goal, however, is to avoid the need for a site to renumber into a
draft-narten-ipv6-3177bis-48boundary-01.txt [Page 3]
INTERNET-DRAFT March 6, 2006
smaller number of subnet bits when adding a new prefix.
3. Other RFC 3177 considerations
RFC3177 suggested that some multihoming approaches (e.g., GSE) might
benefit from having a fixed /48 boundary. This no longer appears to
be a significant issue. There is no such requirement coming out of
the IETF multi6 or shim6 efforts.
RFC3177 argued that having a "one size fits all" default assignment
size reduced the need for customers to continually or repeatedly
justify usage of existing address space in order to get "a little
more". Likewise, it also reduces the need for ISPs to evaluate such
requests. Given the large amount of address space in IPv6, there is
plenty of space to grant end sites enough space to consistent with
reasonable growth projections over multi-year time frames. Thus, it
remains highly desirable to provide end sites with enough space (on
both initial and subsequent assignments) to last several years.
Fortunately, this goal can be achieved in a number of ways and does
not require that all end sites receive the same default size
assignment.
4. Impact on IPv6 Standards
4.1. RFC3056: Connection of IPv6 Domains via IPv4 Clouds
RFC3056 [RFC 3056] describes a way of generating IPv6 addresses from
an existing public IPv4 address. That document describes an address
format in which the first 48 bits concatenate a well-known prefix
with a globally unique public IPv4 address. The "SLA ID" field is
assumed to be 16 bits, consistent with a 16-bit "subnet id" field. To
facilitate transitioning from an RFC3056 address numbering scheme to
one based on a prefix obtained from an ISP, an end site would be
advised to number out of the right most bits first, using the left
most bits only if the size of the site made that necessary.
Similar considerations apply to other documents that allow for a
subnet id of 16 bits, including [SITE-LOCAL].
4.2. IPv6 Multicast Addressing
Some IPv6 multicast address assignment schemes embed a unicast IPv6
prefix into the multicast address itself [RFC3306]. Such documents do
not assume a particular size for the subnet id per se, but do assume
draft-narten-ipv6-3177bis-48boundary-01.txt [Page 4]
INTERNET-DRAFT March 6, 2006
that the IPv6 prefix is a /64. Thus, the relative size of the subnet
id has no direct impact on multicast address schemes.
5. Security Considerations
This document has no known security implications.
6. IANA Considerations
This document makes no requests to IANA.
7. Acknowledgments
This document was motivated by and benefited from numerous
conversations held during the ARIN XV and RIPE 50 meetings in April-
May, 2005.
8. Normative References
9. Informative References
[HUSTON-RIPE] "Report from the ARIN XV IPv6 Roundtable"
http://www.ripe.net/ripe/meetings/ripe-50/presentations/ripe50-plenary-
wed-ipv6-roundtable-report.pdf
[IPV6-HISTORY] Issues Related to the Management of IPv6 Address
Space, draft-narten-iana-rir-
ipv6-considerations-00.txt
[RIR-IPV6] ARIN: http://www.arin.net/policy/nrpm.html#ipv6; RIPE
Document ID: ripe-267, Date: 22 January 2003
http://www.ripe.net/ripe/docs/ipv6policy.html;
APNIC:
http://www.apnic.net/docs/policy/ipv6-address-
policy.html
[RFC 3056] "Connection of IPv6 Domains via IPv4 Clouds," B.
Carpenter, K. Moore, RFC 3056, February 2001.
[RFC 3306] "Unicast-Prefix-based IPv6 Multicast Addresses," B.
Haberman, D. Thaler, RFC 3306, August 2002.
draft-narten-ipv6-3177bis-48boundary-01.txt [Page 5]
INTERNET-DRAFT March 6, 2006
[RFC 3177] IAB/IESG Recommendations on IPv6 Address Allocations to
Sites. IAB, IESG. September 2001.
[SITE-LOCAL] RFC 4193 "Unique Local IPv6 Unicast Addresses," R.
Hinden, B. Haberman, RFC 4193, October 2005.
10. Author's Address
Thomas Narten
IBM Corporation
3039 Cornwallis Ave.
PO Box 12195 - BRQA/502
Research Triangle Park, NC 27709-2195
Phone: 919-254-7798
EMail: narten@us.ibm.com
Geoff Huston
APNIC
EMail: gih@apnic.net
Rosalea G Roberts
Stanford University, Networking Systems
241 Panama Street
Pine Hall, room 175B
Stanford, CA 94305-4102
Email: lea.roberts@stanford.edu
Phone: +1-650-723-3352
Intellectual Property Statement
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
draft-narten-ipv6-3177bis-48boundary-01.txt [Page 6]
INTERNET-DRAFT March 6, 2006
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at ietf-
ipr@ietf.org.
Disclaimer of Validity
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Copyright Statement
Copyright (C) The Internet Society (2006).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
draft-narten-ipv6-3177bis-48boundary-01.txt [Page 7]
| PAFTECH AB 2003-2026 | 2026-04-23 06:11:10 |