One document matched: draft-jaehwoon-dstm-multitep-00.txt


Individual Submission
INTERNET-DRAFT                                             Jaehwoon Lee
Expired: January 2005                                     Dongguk Univ.
Filename:                                                     Jim Bound
draft-jaehwoon-dstm-multitep-00.txt                                  HP
                                                          Myung-ki Shin
                                                              ETRI/NIST
                                                              July 2004
                                                              
                                                              

               Multiple TEP Extension to DSTM
               
               

Status of this Memo

     By submitting this Internet-Draft, I certify that any applicable
     patent or other IPR claims of which I am aware have been disclosed,
     and any of which I become aware will be disclosed, in accordance
     with RFC 3668.

     Internet-Drafts are working documents of the Internet Engineering
     Task Force (IETF), its areas, and its working groups.  Note that
     other groups may also distribute working documents as Internet-
     Drafts.

     Internet-Drafts are draft documents valid for a maximum of six
     months and may be updated, replaced, or obsoleted by other docu-
     ments at any time.  It is inappropriate to use Internet-Drafts as
     reference material or to cite them other than as "work in
     progress."

     The list of current Internet-Drafts can be accessed at
     http://www.ietf.org/ietf/1id-abstracts.txt.

     The list of Internet-Draft Shadow Directories can be accessed at
     http://www.ietf.org/shadow.html.

     This Internet-Draft will expire on January 2005.


Abstract

  Dual stack transition mechanism (DSTM) provides connectivity between
  dual stack hosts (i.e., DSTM client) within an IPv6-only network and
  IPv4 nodes within an IPv4 internet or intranet.
  DSTM defined in [DSTM] considers only
  one TEP, that is, packets from an IPv4 node to a DSTM client
  need to be routed through the same DSTM border router as that used in
  transmitting packets from the DSTM client to the IPv4 node.
  In this draft, we propose a DSTM architecture of using 
  multiple TEPs with only one IPv4 address pool for a DSTM domain.



draft-jaehwoon-multitep-exp-00.txt   Expires - January 2005   [Page 1] 

                Multiple TEP extension to DSTM      July 2004 


Table of Contents:

   1. Introduction...................................................2 
   2. Terminology....................................................2 
   3. Multiple TEP Extension.........................................3 
   4. Applicability Statement........................................4 
   5. Security Considerations........................................5
   References........................................................5 
   Author's Addresses................................................5 
   Intellectual Property Statement...................................5
   Disclaimer of validity............................................6
   Copyright Statement...............................................6
   
1. Introduction

  
  Dual stack transition mechanism (DSTM) enables a dual stack host
  (i.e., DSTM client) within an IPv6 network to communicate with IPv4-
  only capable node within an IPv4 internet or intranet. DSTM defines
  a method to allocate a temporary IPv4 address to a DSTM client and
  provides the IPv4-over-IPv6 tunning in order to carry IPv4 traffic
  within an IPv6 network. DSTM architecture is composed of a number of
  DSTM clients, a DSTM server, and one or more DSTM border routers each
  having a Tunnel End Point (TEP). DSTM defined in [DSTM] assumes only 
  one TEP, that is, packets from an IPv4 node to a DSTM client should 
  be routed through the same TEP as that use in transmitting packets
  from the DSTM client to the IPv4 node. However, the mechanism has
  the drawback of the DSTM domain disconnection from an IPv4 internet
  in the case of the TEP failure. As an approach to overcome this
  deficiency, multiple TEPs each having a different IPv4 address pool
  can be used. However, this method has limitations like that
  each TEP should advertise different IPv4 address pool information
  to the IPv4 internet and optimal router may not be provided. In this
  draft, we propose the multiple TEP extension to DSTM so that traffic
  from a DSTM client to an IPv4 node and the reverse traffic from
  the IPv4 node to the DSTM client can be transmitted through
  different DSTM border routers (TEPs).

  


2. Terminology

  There is no additional terms defined in this draft except those
  defined in [DSTM].







draft-jaehwoon-multitep-exp-00.txt   Expires - January 2005   [Page 2] 

                Multiple TEP extension to DSTM      July 2004 


3. Multiple TEP extension


  An example of the DSTM architecture with multiple TEPs is shown in 
  Figure 1.

   -----------------------------------------------
           DSTM Domain (Intranet)                |    IPv4 Internet
                                                 |    IPv4 Application
                      +---------------------+    |         Domain
                      |     DSTM Server     |    |
                      +---------------------+    |
                                ^  ^      ^      |
                                |  |      |      |
     +----DSTM Node----+        |  |      |      |
     |                 |        |  |      |    +--------+
     | IPv6/IPv4 Node  |        |   - - - - - >| DSTM   |
     |                 |        |         |    | BR2    |
     |-----------------|        |         |    |(TEP2)  |
     |   DSTM client   |<-------+         |    | IPv6   |<------------>
     |-----------------|                  |    |   &    |     IPv4
     |  4over6 iface   |<=====================>|  IPv4  |
     +-----------------+  IPv4 over IPv6  |    +--------+
                ^             tunnel      |      |
               	||                        |      |
                ||                        |    +--------+
                ||                        +--->| DSTM   |
                ||                             | BR1    |
                 =============================>|(TEP1)  |
                       IPv4 over IPv6          | IPv6   |<------------>
                            tunnel             |   &    |     IPv4
                                               |  IPv4  |
                                               +--------+
                IPv6-only Network                |                
                                                 |
   ----------------------------------------------

  Figure 1 A schematic overview of DSTM with the multiple TEP extension


  As an example, network address 1.0.0.0 is allocated as an IPv4 
  address pool for the DSTM domain in figure 1.
  The border router operates between a DSTM domain and an IPv4 
  internet and advertises the network address to an IPv4 internet
  in order to provide the reachability from the IPv4 internet.
  Routing within an IPv4 internet must ensure that
  IPv4 packets destined to the DSTM domain arrive at one or more
  TEPs within the DSTM domain.




draft-jaehwoon-multitep-exp-00.txt   Expires - January 2005   [Page 3] 

                Multiple TEP extension to DSTM      July 2004 

 
  In order to communicate with an IPv4 node, a DSTM client asks
  the DNS for the A/AAAA RR for an IPv4 node. The answer of the
  DNS is the IPv4 address (type A) of the IPv4 node.
  
  The DSTM node queries the DSTM server in order to get a temporary 
  IPv4 global address and the IPv6 TEP address. On receiving the
  request, the DSTM server provides a temprary IPv4 address currently
  not used and the IPv6 address of a TEP (i.e., TEP1), and caches
  the information for the IPv6 address of the DSTM node and the IPv4
  address allocated to it.
  
  The IPv4 address allocated to the DSTM client is used as
  the source address of the IPv4 packets generated by the DSTM client.
  The DSTM client encapsulates an IPv4 packet and sends the 
  encapsulated IPv6 packet to a DSTM border router, BR1, defined by 
  the TEP1 address.
  
  BR1 decapsulates the packet, sends it to the IPv4 node, and caches 
  the IPv6/IPv4 addresses of the DSTM client.
  
  The IPv4 node answers, and the IPv4 packet may arrive at another
  DSTM borer router, BR2.

  BR2 checks the mapping information. If the destination IPv4 address
  exists in the informatioin, the router uses the mapping between IPv4
  and IPv6 addresses to tunnel the packet to the destination. 
  Otherwise, BR2 queries the DSTM server for the IPv6 address 
  corresponding to the IPv4 address allocated to the DSTM client.

  The DSTM server sends to BR2 the IPv6 address corresponding to the
  queried IPv4 address.
  
  BR2 caches the mapping information of the IPv6 and IPv4 addresses,
  encapsulates the IPv4 packet, and tunnels the packet to the DSTM
  client.

4.  Applicability statement

  Multiple TEP extension to DSTM, proposed in this draft, assumes
  only one DSTM server. At this time, it is beyond the scope of
  this proposal to consider multiple DSTM server as well as 
  synchronization of address mapping information between them.
  
  Mechanism in this proposal also assumes that the DSTM client provides
  its global IPv6 address to DSTM server when it queries
  for a temporary IPv4 address.






draft-jaehwoon-multitep-exp-00.txt   Expires - January 2005   [Page 4] 

                Multiple TEP extension to DSTM      July 2004 

    
5.  Security Considerations
  
  This draft can follow security considerations defined by original
  DSTM draft [DSTM]. 



References
  [DSTM] Bound, Jim et al, "Dual Stack Transition Mechanism", 
         April 2004, draft-bound-dstm-exp-01.txt.   


  
Authors' Addresses
  
  Jaehwoon Lee 
  Dongguk University
  26, 3-ga Pil-dong, Chung-gu
  Seoul, 100-715, KOREA  
  Email: jaehwoon@dongguk.edu
  
  
  Jim Bound
  ZK3-3/W20
  Hewlett Packerd
  110 Spit brook Road
  Nashua, NH 03062-2698, USA.
  Email: Jim.Bound@hp.com
    

  Myung-Ki Shin 
  ETRI/NIST 
  820 West Diamond Avenue 
  Gaithersburg, MD 20899, USA 
  E-mail : mshin@nist.gov 



Intellectual Property Statement

  The IETF takes no position regarding the validity or scope of any
  Intellectual Property Rights or other rights that might be claimed
  to pertain to the implementation or use of the technology described
  in this document or the extent to which any license under such
  rights might or might not be available; nor does it represent that
  it has made any independent effort to identify any such rights.
  Information on the procedures with respect to rights in RFC
  documents can be found in BCP 78 and BCP 79.




draft-jaehwoon-multitep-exp-00.txt   Expires - January 2005   [Page 5] 

                Multiple TEP extension to DSTM      July 2004 


  Copies of IPR disclosures made to the IETF Secretariat and any
  assurances of licenses to be made available, or the result of an
  attempt made to obtain a general license or permission for the use
  of such proprietary rights by implementers or users of this
  specification can be obtained from the IETF on-line IPR repository
  at http://www.ietf.org/ipr.

  The IETF invites any interested party to bring to its attention any
  copyrights, patents or patent applications, or other proprietary
  rights that may cover technology that may be required to implement
  this standard.  Please address the information to the IETF at ietf-
  ipr@ietf.org.


Disclaimer of Validity

  This document and the information contained herein are provided on
  an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE
  REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND
  THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES,
  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT
  THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR
  ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
  PARTICULAR PURPOSE.


Copyright Statement

  Copyright (C) The Internet Society (2004).  This document is
  subject to the rights, licenses and restrictions contained in BCP
  78, and except as set forth therein, the authors retain all their
  rights.




















draft-jaehwoon-multitep-exp-00.txt   Expires - January 2005   [Page 6] 


PAFTECH AB 2003-20262026-04-24 01:14:37