One document matched: draft-ietf-vpim-routing-07.txt
Differences from draft-ietf-vpim-routing-06.txt
Internet Draft Greg Vaudreuil
Expires in six months Lucent Technologies
October 22, 2004
Voice Message Routing Service
<draft-ietf-vpim-routing-07.txt>
Status of this Memo
This document is an Internet-Draft and is subject to all provisions of
Section 10 of RFC 2026.
This document is an Internet Draft. Internet Drafts are working
documents of the Internet Engineering Task Force (IETF), its Areas,
and its Working Groups. Note that other groups may also distribute
working documents as Internet Drafts.
Internet Drafts are valid for a maximum of six months and may be
updated, replaced, or obsoleted by other documents at any time. It is
inappropriate to use Internet Drafts as reference material or to cite
them other than as a "work in progress".
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/1id-abstracts.html
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html
Intellectual Property Notice
By submitting this Internet-Draft, I certify that any applicable
patent or other IPR claims of which I am aware have been disclosed, or
will be disclosed, and any of which I become aware will be disclosed,
in accordance with RFC 3668.
Copyright Notice
Copyright (C) The Internet Society (2004). All Rights Reserved.
This Internet-Draft is in conformance with Section 10 of RFC2026.
Overview
Internet Draft VPIM Routing October 22, 2004
Voice messaging is traditionally addressed using telephone number
addressing. This document describes two techniques for routing voice
messages based on a telephone number. The VPIM Directory service
provides a directory mechanism to lookup a VPIM email address with a
telephone number and confirm that the address is both valid and the
associated with the intended recipient. However this service will
take time become widely deployed in the nearest term. This document
also describes a more limited send-and-pray service useful simply to
route and deliver messages using only the ENUM telephone number
resolution service and the existing DNS mail routing facilies.
Please send comments on this document to the VPIM working group
mailing list <vpim@lists.neystadt.org>
Vaudreuil Expires 4/22/05 [Page 2]
Internet Draft VPIM Routing October 22, 2004
Working Group Summary
This is a submission to the IETF VPIM working group.
Table of Contents
1. ABSTRACT ..........................................................4
2. DESIGN GOALS ......................................................4
3. THE COMPLETE SERVICE ..............................................5
3.1 Specification of Service "E2U+Voice:DIR" ........................5
3.2 VPIM Directory Discovery ........................................5
3.3 Address Query ...................................................6
4. THE BASIC SERVICE .................................................7
4.1 Specification of Service "E2U+VPIM:Mailto:" .....................7
4.2 Address Construction ............................................8
4.3 Interdomain Message Routing .....................................8
4.4 Intradomain Message Routing .....................................8
5. SECURITY CONSIDERATIONS ..........................................10
6. NORMATIVE REFERENCES .............................................10
7. INTELLECTUAL PROPERTY NOTICE .....................................10
8. COPYRIGHT NOTICE .................................................11
9. AUTHORS' ADDRESSES ...............................................11
Vaudreuil Expires 4/22/05 [Page 3]
Internet Draft VPIM Routing October 22, 2004
1. Abstract
This document describes two mechanisms by which a sending VPIM system
may determine the destination mailbox given a telephone number. Both
mechanisms build upon ENUM. One mechanism utilizes an LDAP query to
determine recipient capabilities and retrieve address confirmation
information such as a spoken or text name.
2. Design Goals
This profile is intended to provide a range of functional capabilities
for message routing based on one of two mechanisms. The most complete
service should use the ENUM address resolution service to determine
the VPIM directory, and then use LDAP to retreive the VPIM-specific
email address to use for message routing.
The more basic send-and-pray message service uses only the ENUM
service and MX records to route the message to the intended
recipient's domain. The intelligence to further route the message to
the intended recipient is placed within the message routing system of
the recipient's domain.
The basic mechanism may be used even when there is a VPIM directory
service avaiable. The basic service is useful when LDAP queries are
not available, such as may be the case for disconnected mobile
terminals or because of firewall or information security policies.
The basic mechanism should facilitate the routing of VPIM messages to
a suitable internal destination with a minimum of configuration. It
is an important goal to avoid any content-processing to determine the
nature of the message and its internal destination. It should be
possible at a minimum to establish a simple mail forwarding rule to
send all inbound VPIM messages to a designated system while
facilitating the routing of FAX, SMS, or other telephone-addressed
messages to other potentially different systems.
It is a goal that the mechanisms outlined in this document be
extensible for all store-and-forward, telephone-number addressed
messaging services.
It is a goal that the VPIM directory discovery and VPIM directory
query steps occur within the timing constraints for user interfaces in
PSTN networks. In general, that constraint can be generalized to be a
two-second response 95% of the time.
Vaudreuil Expires 4/22/05 [Page 4]
Internet Draft VPIM Routing October 22, 2004
3. The Complete Service
For the complete VPIM message routing service, the sending client
SHOULD query the VPIM directory for the VPIM-specific email address.
The client SHOULD use the ENUM service to retrieve the identity of the
VPIM Directory to query. The client should then query that server for
the email address and any additional attributes desired.
3.1 Specification of Service "E2U+Voice:DIR"
* Service Name: E.164 to VPIM LDAP URL
* URI Type: "LDAP:"
* Type: Voice
* Subtype: DIR
* Functional Specification: See section 3.2 through 3.3
* Intended Usage: COMMON
* Author: Greg Vaudreuil (gregv@ieee.org)
* Security Considerations:
o Malicious Redirection
One of the fundamental dangers related to any service such
as this is that a malicious entry in a resolver's database
will cause clients to resolve the E.164 into the wrong URL.
The possible intent may be to cause the client to retrieve a
resource containing fraudulent or damaging material.
o Denial of Service
By removing the URL to which the E.164 maps, a malicious
intruder may remove the client's ability to access the
resource.
3.2 VPIM Directory Discovery
The VPIM directory server is found by using the ENUM protocol and
querying for the VPIMDIR service associated with the telephone number
of the recipient.
The DNS query name is created as described by [ENUM]. The telephone
number used for the directory location MAY contain additional sub-
address information as additional digits.
Example:
Vaudreuil Expires 4/22/05 [Page 5]
Internet Draft VPIM Routing October 22, 2004
Query: 2.1.2.1.5.5.5.3.1.6.1.e164.arpa
Responses:
IN NAPTR 10 10 "U" "E2U+voice:DIR" \
"!^.*$!ldap://vpimdir1.Zcorp.com/telephoneNumber=\1!" .
IN NAPTR 10 20 "U" " E2U+Voice:DIR" \
"!^.*$!ldap://vpimdir2.Zcorp.com/telephoneNumber=\1!" .
It is recommended that VPIMDIR servers be deployed in a redundant
configuration. NAPTR weight fields provide the ability to give two
records indicating the same service and preference a different weight.
The same weight can be specified for random distribution between the
two servers. See [NAPTR]
3.3 Address Query
Once the VPIM directory is discovered, the client SHOULD issue a LDAP
query for the vPIMrFC822Mailbox, that is, the address that SHOULD be
used as the value for both the RFC822 To: field and the SMTP RCPT
command. See [VPIMDIR]
Vaudreuil Expires 4/22/05 [Page 6]
Internet Draft VPIM Routing October 22, 2004
4. The Basic Service
The basic service relies upon NAPTR rewrite rules to mechanically
construct a valid VPIM-specific email address. In the recipient's
domain, the constructed address may be further routed using
intradomain mail routing techniques such as those defined in [LASER].
To facilitate a full range of intradomain routing options, the
constructed email address indicates that the message is a VPIM
message. For ease of processing in the recipient's intradomain mail
routing system, the indication that the message is a VPIM message
SHOULD be in the domain name portion.
Note, that no validation that the constructed address is valid, nor
that the constructed address corresponds to the intended recipient.
Because no capabilities information is provided about the recipient,
messages sent with this mechaism SHOULD be sent using only the media
and content types of the VPIM V2 profile.
4.1 Specification of Service "E2U+VPIM:Mailto:"
* Service Name: E.164 to VPIM MailTo: URL
* URI Type: "Mailto:"
* Type: VPIM
* Subtype: MAILTO
* Functional Specification: See section 4.2 through 4.4
* Intended Usage: COMMON
* Author: Greg Vaudreuil (gregv@ieee.org)
* Error Conditions:
o E.164 number not in the numbering plan
o E.164 number in the numbering plan, but no URLs exist for
that number
o E2U+VPIM:Mailto Service unavailable
* Security Considerations:
o Malicious Redirection
One of the fundamental dangers related to any service such
as this is that a malicious entry in a resolver's database
will cause clients to resolve the E.164 into the wrong URL.
The possible intent may be to cause the client to retrieve a
resource containing fraudulent or damaging material.
o Denial of Service
By removing the URL to which the E.164 maps, a malicious
intruder may remove the client's ability to access the
resource.
Vaudreuil Expires 4/22/05 [Page 7]
Internet Draft VPIM Routing October 22, 2004
o Unsolicited Bulk Email
The exposure of email addresses through the ENUM service
provides a bulk mailer access to large numbers of email
addresses where only the telephone number was previously
known.
4.2 Address Construction
Construct an VPIM email address using the address rewrite rules of the
NAPTR records associated with the VPIM service.
4.3 Interdomain Message Routing
The interdomain routing of a constructed VPIM address is mechanically
indistinguishable from existing email routing. No changes to the
infrastructure are required. The sending system consults the Domain
Name System for an MX record corresponding to the domain name and
forwards the message to the indicated system.
4.4 Intradomain Message Routing
Within the recipient's domain, the message may be further routed to
the appropriate messaging system. Two general mechanisms may be used
to further route the message to the intended system within a network.
Note: This section is strictly informational. The mechanisms
for intradomain routing are an internal matter for the domain
and do not affect the protocol. It is only necessary that the
addresses created by the NAPTR rewrite rules have meaning to the
domain advertising them. However, a convention for the creation
and use of such address may be useful.
Vaudreuil Expires 4/22/05 [Page 8]
Internet Draft VPIM Routing October 22, 2004
4.4.1 Directory-Enabled Routing
Various proprietary directory mechanisms provide a means for an
inbound mail router of the recipient's domain to send a message to the
appropriate internal mail host. In many cases, the local part of the
address is used to query for an internal mail address. That internal
mail address is substituted for the SMTP RCPT address and used to
deliver the message to the recipient mailbox. Note that the mailbox
does not need to have any knowledge of the mechanically-constructed
telephone number-based address.
Example address: +12145551212@sp.net
4.4.2 Service-based Mail Routing
Alternately, a mail gateway may simply send all voice messages into a
separate messaging system. That system may be a single voice
messaging server or a service-specific gateway into a larger
telephonenumber-based voice-messaging network.
Such a mail gateway may be provisioned with a simple rule or small set
of rules to forward all messages of a given service type to a pre-
defined server. This rule would check for the service name "VPIM" as
a prefix to the constructed domain name to reroute messages.
Example address: +12145551212@VPIM.sp.net
Vaudreuil Expires 4/22/05 [Page 9]
Internet Draft VPIM Routing October 22, 2004
5. Security Considerations
There is little information disclosed to the sender of a message that
is not already disclosed using standard email protocols beyond the
ability to probe, via send-and-fail, the existance of a reachable
account associated with a telephone number, and via the NDN, determine
in which domain the account resides.
However, the use of ENUM records to create routeable email addresses
from telephone numbers provides bulk-emailers the capablities to send
email to a large set of recipients where only the telephone number is
known or where telephone numbers are guessed.
6. Normative References
[E164] CCITT Recommendation E.164 (1991), Telephone Network and ISDN
Operation, Numbering, Routing and Mobile Service - Numbering Plan for
the ISDN Era.
[ENUM] RFC 3761
[NAPTR] RFCs 3401, 3402, 3403, and 3404
[VPIM2] Vaudreuil, Greg, Parsons, Glen, "Voice Profile for Internet
Mail, Version 2", RFC 3801, June 2004.
[VPIMDIR] G. Vaudreuil "VPIM Directory Schema", work-in-progress,
<draft-ietf-vpim-vpimdir-08.txt>, October 12, 2004.
7. Intellectual Property Notice
The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to pertain
to the implementation or use of the technology described in this
document or the extent to which any license under such rights might or
might not be available; neither does it represent that it has made any
effort to identify any such rights. Information on the IETF's
procedures with respect to rights in standards-track and standards-
related documentation can be found in BCP-11. Copies of claims of
rights made available for publication and any assurances of licenses
to be made available, or the result of an attempt made to obtain a
general license or permission for the use of such proprietary rights
by implementors or users of this specification can be obtained from
the IETF Secretariat.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights which may cover technology that may be required to practice
this standard. Please address the information to the IETF Executive
Director.
Vaudreuil Expires 4/22/05 [Page 10]
Internet Draft VPIM Routing October 22, 2004
8. Copyright Notice
"Copyright (C) The Internet Society (2004). This document is subject
to the rights, licenses and restrictions contained in BCP 78, and
except as set forth therein, the authors retain all their rights."
"This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE."
9. Authors' Addresses
Gregory M. Vaudreuil
Lucent Technologies
9489 Bartgis Ct
Frederick, MD 21702
Email: GregV@ieee.org
Vaudreuil Expires 4/22/05 [Page 11]
| PAFTECH AB 2003-2026 | 2026-04-24 01:59:12 |