One document matched: draft-ietf-speermint-requirements-07.txt
Differences from draft-ietf-speermint-requirements-06.txt
SPEERMINT Working Group J-F. Mule
Internet-Draft CableLabs
Intended status: Informational October 17, 2008
Expires: April 20, 2009
SPEERMINT Requirements for SIP-based Session Peering
draft-ietf-speermint-requirements-07.txt
Status of this Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on April 20, 2009.
Mule Expires April 20, 2009 [Page 1]
Internet-Draft SPEERMINT Requirements October 2008
Abstract
This memo captures protocol requirements to enable session peering of
voice, presence, instant messaging and other types of multimedia
traffic. It is based on the use cases that have been described in
the SPEERMINT working group. This informational document is intended
to link the session peering use cases to protocol solutions.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. General Requirements . . . . . . . . . . . . . . . . . . . . . 5
3.1. Scope . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.2. Border Elements . . . . . . . . . . . . . . . . . . . . . 5
3.3. Session Establishment Data . . . . . . . . . . . . . . . . 8
3.3.1. User Identities and SIP URIs . . . . . . . . . . . . . 8
3.3.2. URI Reachability . . . . . . . . . . . . . . . . . . . 9
4. Requirements for Session Peering of Presence and Instant
Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5. Security Considerations . . . . . . . . . . . . . . . . . . . 12
5.1. Security Properties for the Acquisition of Session
Establishment Data . . . . . . . . . . . . . . . . . . . . 12
5.2. Security Properties for the SIP signaling exchanges . . . 13
5.3. End-to-End Media Security . . . . . . . . . . . . . . . . 14
6. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 15
7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 16
8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8.1. Normative References . . . . . . . . . . . . . . . . . . . 17
8.2. Informative References . . . . . . . . . . . . . . . . . . 17
Appendix A. Policy Parameters for Session Peering . . . . . . . . 20
A.1. Categories of Parameters for VoIP Session Peering and
Justifications . . . . . . . . . . . . . . . . . . . . . . 20
A.2. Summary of Parameters for Consideration in Session
Peering Policies . . . . . . . . . . . . . . . . . . . . . 23
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 25
Intellectual Property and Copyright Statements . . . . . . . . . . 26
Mule Expires April 20, 2009 [Page 2]
Internet-Draft SPEERMINT Requirements October 2008
1. Introduction
Peering at the session level represents an agreement between parties
to exchange multimedia traffic. It is assumed that these sessions
use the Session Initiation Protocol (SIP) protocol to enable peering
between two or more actors. These actors are called SIP Service
Providers (SSPs) and they are typically represented by users, user
groups such as enterprises, real-time collaboration service
communities, or other service providers offering voice or multimedia
services using SIP.
A reference architecture for SIP session peering is described in
[I-D.ietf-speermint-architecture]. A number of use cases describe
how session peering has been or could be deployed based on the
reference architecture
([I-D.ietf-speermint-voip-consolidated-usecases] and
[I-D.ietf-speermint-consolidated-presence-im-usecases]).
Peering at the session layer can be achieved on a bilateral basis
(direct peering established directly between two SSPs), or on an
indirect basis via a session intermediary (indirect peering via a
third-party SSP that has a trust relationship with the SSPs) - see
the terminology document for more details.
This document first describes general requirements. The use cases
are then analyzed in the spirit of extracting relevant protocol
requirements that must be met to accomplish the use cases. These
requirements are intended to be independent of the type of media
exchanged such as Voice over IP (VoIP), video telephony, and instant
messaging. Requirements specific to presence and instant messaging
are defined in Section 4.
It is not the goal of this document to mandate any particular use of
IETF protocols by SIP Service Providers in order to establish session
peering. Instead, the document highlights what requirements should
be met and what protocols may be used to define the solution space.
Finally, we conclude with a list of parameters for the definition of
a session peering policy, provided in an informative appendix. It
should be considered as an example of the information SIP Service
Providers may have to discuss or agree on to exchange SIP traffic.
Mule Expires April 20, 2009 [Page 3]
Internet-Draft SPEERMINT Requirements October 2008
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
This document also reuses the terminology defined in
[I-D.ietf-speermint-terminology]. It is assumed that the reader is
familiar with the Session Description Protocol (SDP) [RFC4566] and
the Session Initiation Protocol (SIP) [RFC3261]. Finally, when used
with capital letters, the terms 'Authentication Service' are to be
understood as defined by SIP Identity [RFC4474].
Mule Expires April 20, 2009 [Page 4]
Internet-Draft SPEERMINT Requirements October 2008
3. General Requirements
The following sub-sections contain general requirements applicable to
multiple use cases for multimedia session peering.
3.1. Scope
The primary focus of this document is on the requirements applicable
to the boundaries of Layer 5 SIP networks: SIP entities, Signaling
path Border Elements (SBEs), and the associated protocol requirements
for the look-up and location routing of the session establishment
data. The requirements applicable to SIP UAs or related to the
provisioning of the session data are considered out of scope.
SSPs desiring to establish session peering relationships have to
reach an agreement on numerous points.
This document highlights only certain aspects of a session peering
agreement, mostly the requirements relevant to protocols: the
declaration, advertisement and management of ingress and egress
border elements for session signaling and media, information related
to the Session Establishment Data (SED), and the security properties
that may be desirable for secure session exchanges.
Numerous other considerations of session peering arrangements are
critical to reach a successful agreement but they are considered out
of scope of the SPEERMINT working group. They include information
about SIP protocol support (e.g. SIP extensions and field
conventions), media (e.g., type of media traffic to be exchanged,
compatible media codecs and transport protocols, mechanisms to ensure
differentiated quality of service for media), layer-3 IP connectivity
between the Signaling and Data path Border Elements, accounting and
traffic capacity control (e.g. the maximum number of SIP sessions at
each ingress point, or the maximum number of concurrent IM or VoIP
sessions).
The informative Appendix A lists parameters that may be considered
when discussing the technical parameters of SIP session peering. The
purpose of this list is to capture the parameters that are considered
outside the scope of the protocol requirements.
3.2. Border Elements
For border elements to be operationally manageable, maximum
flexibility should be given for how they are declared or dynamically
advertised. Indeed, in any session peering environment, there is a
need for a SIP Service Provider to declare or dynamically advertise
the SIP entities that will face the peer's network. The data path
border elements are typically signaled dynamically in the session
description.
Mule Expires April 20, 2009 [Page 5]
Internet-Draft SPEERMINT Requirements October 2008
The use cases defined in
[I-D.ietf-speermint-voip-consolidated-usecases] catalog the various
border elements between SIP Service Providers; they include Signaling
path Border Elements (SBEs) and SIP proxies (or any SIP entity at the
boundary of the Layer 5 network).
o Requirement #1:
Protocol mechanisms MUST be provided to enable a SIP Service
Provider to communicate the ingress Signaling Path Border Elements
of its service domain.
Notes on solution space:
The SBEs may be advertised to session peers using static
mechanisms or they may be dynamically advertised. There is
general agreement that [RFC3263] provides a solution for
dynamically advertising ingress SBEs in most cases of Direct or
Indirect peering. However, this DNS-based solution may be limited
in cases where the DNS response varies based on who sends the
query (peer-dependent SBEs, see below).
o Requirement #2:
Protocol mechanisms MUST be provided to enable a SIP Service
Provider to communicate the egress SBEs of its service domain.
Notes on motivations for this requirement:
For the purposes of capacity planning, traffic engineering and
call admission control, a SIP Service Provider may be asked where
it will generate SIP calls from. The SSP accepting calls from a
peer may wish to know where SIP calls will originate from (this
information is typically used by the terminating SSP).
While provisioning requirements are out-of-scope, some SSPs may
find use for a mechanism to dynamically advertise or discover the
egress SBEs of a peer.
If the SSP also provides media streams to its users as shown in the
use cases for "Originating" and "Terminating" SSPs, a mechanism must
exist to allow SSPs to advertise their egress and ingress data path
border elements (DBEs), if applicable. While some SSPs may have open
policies and accept media traffic from anywhere outside their network
to anywhere inside their network, some SSPs may want to optimize
media delivery and identify media paths between peers prior to
traffic being sent (layer 5 to layer 3 QoS mapping).
o Requirement #3:
Protocol mechanisms MUST be provided to allow a SIP Service
Provider to communicate its DBEs to its peers.
Notes: Some SSPs engaged in SIP interconnects do exchange this
Mule Expires April 20, 2009 [Page 6]
Internet-Draft SPEERMINT Requirements October 2008
type of DBE information today in a static manner. Some SSPs do
not.
In some SIP networks, SSPs operate the same border elements for all
peers. In other SIP networks, it is common for SSPs to advertise
specific SBEs and DBEs to certain peers: the advertisement of SBEs
and DBEs may be peer-dependent.
o Requirement #4:
The mechanisms recommended for the declaration or advertisement of
SBE and DBE entities MUST allow for peer variability.
Notes on solution space:
For advertising peer-dependent SBEs (peer variability), the
solution space based on [RFC3263] is under specified and there are
no know best current practices. Is DNS the right place for
putting data that varies based on who asks?
Notes on media-variability of such advertisements:
Some SSPs may have some restrictions on the type of media traffic
their SBEs can accept. For SIP sessions however, it is not
possible to communicate those restrictions in advance of the
session initiation: a SIP target may support voice-only media,
voice and video, or voice and instant messaging communications.
While the inability to find out whether a particular type of SIP
session can be terminated by a certain SBE can cause failed
session establishment attempts, there is consensus to not add a
new requirement for this. These aspects are essentially covered
by SSPs when discussing traffic exchange policies (out of scope of
this document).
In the use cases provided as part of direct and indirect peering
scenarios, an SSP deals with multiple SIP entities and multiple SBEs
in its own domain. There is often a many-to-many relationship
between the SIP Proxies considered inside the trusted network
boundary of the SSP and its Signaling path Border Elements at the
network boundaries.
It should be possible for an SSP to define which egress SBE a SIP
entity must use based on a given peer destination.
For example, in the case of an indirect peering scenario (section 5.
of [I-D.ietf-speermint-voip-consolidated-usecases], Figure 5), it
should be possible for the SIP proxy in the originating network
(O-Proxy) to select the appropriate egress SBE (O-SBE) to reach the
SIP target based on the information the proxy receives from the
Lookup Function (O-LUF) and/or Location Routing Function (O-LRF) -
message response labeled (2). Note that this example also applies to
the case of Direct Peering when a service provider has multiple
service areas and each service area involves multiple SIP Proxies and
Mule Expires April 20, 2009 [Page 7]
Internet-Draft SPEERMINT Requirements October 2008
a few SBEs.
o Requirement #5:
The mechanisms recommended for the Look-Up Function (LUF) and the
Location Routing Functions (LRF) MUST be capable of returning both
a target URI destination and a value providing the next SIP
hop(s).
Notes: solutions may exist depending on the choice of the protocol
used between the Proxy and its LUF/LRF. The idea is for the
O-Proxy to be provided with the next SIP hop and the equivalent of
one or more SIP Route header values. If ENUM is used as a
protocol for the LUF, the solution space is undefined.
It is desirable for an SSP to be able to communicate how
authentication of a peer's SBEs will occur (see the security
requirements for more details).
o Requirement #6:
The mechanisms recommended for locating a peer's SBE MUST be able
to convey how a peer should initiate secure session establishment.
Notes : some mechanisms exist. For example, the required protocol
use of SIP over TLS may be discovered via [RFC3263].
3.3. Session Establishment Data
The Session Establishment Data (SED) is defined in
[I-D.ietf-speermint-terminology] as the data used to route a call to
the next hop associated with the called domain's ingress point. The
following paragraphs capture some general requirements on the SED
data.
3.3.1. User Identities and SIP URIs
User identities used between peers can be represented in many
different formats. Session Establishment Data should rely on URIs
(Uniform Resource Identifiers, [RFC3986]) and SIP URIs should be
preferred over tel URIs ([RFC3966]) for session peering of VoIP
traffic.
The use of DNS domain names and hostnames is recommended in SIP URIs
and they should be resolvable on the public Internet. As for the
user part of the SIP URIs, the mechanisms for session peering should
not require an SSP to be aware of which individual user identities
are valid within its peer's domain.
o Requirement #7:
The protocols used for session peering MUST accommodate the use of
Mule Expires April 20, 2009 [Page 8]
Internet-Draft SPEERMINT Requirements October 2008
different types of URIs. URIs with the same domain-part SHOULD
share the same set of peering policies, thus the domain of the SIP
URI may be used as the primary key to any information regarding
the reachability of that SIP URI. The host part of SIP URIs
SHOULD contain a fully-qualified domain name instead of a numeric
IPv4 or IPv6 address.
o Requirement #8:
The mechanisms for session peering should not require an SSP to be
aware of which individual user identities are valid within its
peer's domain.
o Notes on the solution space for #7 and #8:
This is generally well supported by IETF protocols. When
telephone numbers are in tel URIs, SIP requests cannot be routed
in accordance with the traditional DNS resolution procedures
standardized for SIP as indicated in [RFC3824]. This means that
the solutions built for session peering must not solely use PSTN
identifiers such as Service Provider IDs (SPIDs) or Trunk Group
IDs (they should not be precluded but solutions should not be
limited to these).
Motivations:
Although SED data may be based on E.164-based SIP URIs for voice
interconnects, a generic peering methodology should not rely on
such E.164 numbers.
3.3.2. URI Reachability
Based on a well-known URI type (for e.g. sip:, pres:, or im: URIs),
it must be possible to determine whether the SSP domain servicing the
URI allows for session peering, and if it does, it should be possible
to locate and retrieve the domain's policy and SBE entities.
For example, an originating service provider must be able to
determine whether a SIP URI is open for direct interconnection
without requiring an SBE to initiate a SIP request. Furthermore,
since each call setup implies the execution of any proposed
algorithm, the establishment of a SIP session via peering should
incur minimal overhead and delay, and employ caching wherever
possible to avoid extra protocol round trips.
o Requirement #9:
The mechanisms for session peering MUST allow an SBE to locate its
peer SBE given a URI type and the target SSP domain name.
Mule Expires April 20, 2009 [Page 9]
Internet-Draft SPEERMINT Requirements October 2008
4. Requirements for Session Peering of Presence and Instant Messaging
This section describes requirements for presence and instant
messaging session peering. Several use cases for presence and
instant messaging peering are described in
[I-D.ietf-speermint-consolidated-presence-im-usecases], a document
authored by A. Houri, E. Aoki and S. Parameswar. Credits for this
section must go to A. Houri, E. Aoki and S. Parameswar.
The following requirements for presence and instant messaging session
peering are derived from
[I-D.ietf-speermint-consolidated-presence-im-usecases] and an initial
set of related requirements published by A. Houri, E. Aoki and S.
Parameswar:
o Requirement #10:
The mechanisms recommended for the exchange of presence
information between SSPs MUST allow a user of one SSP's presence
community to subscribe presentities served by another SSP via its
local community, including subscriptions to a single presentity, a
personal, public or ad-hoc group list of presentities.
Notes: see section 2.2 of
[I-D.ietf-speermint-consolidated-presence-im-usecases].
o Requirement #11:
The mechanisms recommended for Instant Messaging message exchanges
between SSPs MUST allow a user of one SSP's community to
communicate with users of the other SSP community via their local
community using various methods. Such methods include sending a
one-time IM message, initiating a SIP session for transporting
sessions of messages, participating in n-way chats using chat
rooms with users from the peer SSPs, sending a file or sharing a
document.
Notes: see section 2.6 of
[I-D.ietf-speermint-consolidated-presence-im-usecases].
o Requirement #12: Privacy Sharing
In order to enable sending less notifications between communities,
there should be a mechanism that will enable sharing privacy
information of users between the communities. This will enable
sending a single notification per presentity that will be sent to
the appropriate watchers on the other community according to the
presentity's privacy information.
The privacy sharing mechanism must be done in a way that will
enable getting the consent of the user whose privacy will be sent
to the other community prior to sending the privacy information.
Mule Expires April 20, 2009 [Page 10]
Internet-Draft SPEERMINT Requirements October 2008
if user consent is not give, it should not be possible to this
optimization. In addition to getting the consent of users
regarding privacy sharing, the privacy data must be sent only via
secure channels between communities.
Notes: see section 2.3 of
[I-D.ietf-speermint-consolidated-presence-im-usecases].
o Requirement #13: Multiple Recipients
It should be possible to send a presence document with a list of
watchers on the other community that should receive the presence
document notification. This will enable sending less presence
document notifications between the communities while avoiding the
need to share privacy information of presentities from one
community to the other.
o Requirement #14: Mappings
Early deployments of SIP based presence and IM gateways are done
in front of legacy proprietary systems that use different names
for different properties that exist in PIDF. For example "Do Not
Disturb" may be translated to "Busy" in another system. In order
to make sure that the meaning of the status is preserved, there is
a need that either each system will translate its internal
statuses to standard PIDF based statuses of a translation table of
proprietary statuses to standard based PIDF statuses will be
provided from one system to the other.
Mule Expires April 20, 2009 [Page 11]
Internet-Draft SPEERMINT Requirements October 2008
5. Security Considerations
This section describes the security properties that are desirable for
the protocol exchanges in scope of session peering. Three types of
information flows are described in the architecture and use case
documents: the acquisition of the Session Establishment Data (SED)
based on a destination target via the Lookup and Location Routing
Functions (LUF and LRF), the SIP signaling between SIP Service
Providers, and the associated media exchanges.
This section is focused on three security services, authentication,
data confidentiality and data integrity as summarized in [RFC3365].
However, this text does not specify the mandatory-to-implement
security mechanisms as required by [RFC3365]; this is left for future
protocol solutions that meet the requirements.
A security threat analysis provides additional guidance for session
peering ([I-D.niccolini-speermint-voipthreats]).
5.1. Security Properties for the Acquisition of Session Establishment
Data
The Look-Up Function (LUF) and Location Routing Function (LRF) are
defined in [I-D.ietf-speermint-terminology]. They provide mechanisms
for determining the SIP target address and domain the request should
be sent to, and the associated SED to route the request to that
domain.
o Requirement #15:
The protocols used to query the Lookup and Location Routing
Functions MUST support mutual authentication.
Motivations:
A mutual authentication service is desirable for the LUF and LRF
protocol exchanges. The content of the response returned by the
LUF and LRF may depend on the identity of the requestor: the
authentication of the LUF & LRF requests is therefore a desirable
property. Mutual authentication is also desirable: the requestor
may verify the identity of the systems that provided the LUF & LRF
responses given the nature of the data returned in those
responses. Authentication also provides some protection for the
availability of the LUF and LRF against attackers that would
attempt to launch DoS attacks by sending bogus requests causing
the LUF to perform a lookup and consume resources.
o Requirement #16:
The protocols used to query the Lookup and Location Routing
Functions MUST provide support for data confidentiality and
Mule Expires April 20, 2009 [Page 12]
Internet-Draft SPEERMINT Requirements October 2008
integrity.
Motivations:
Given the sensitive nature of the session establishment data
exchanged with the LUF and LRF functions, the protocol mechanisms
chosen for the lookup and location routing should offer data
confidentiality and integrity protection (SED data may contain
user addresses, SIP URI, location of SIP entities at the
boundaries of SIP Service Provider domains, etc.).
o Notes on the solution space for Requirements #15 and #16: ENUM,
SIP and proprietary protocols are typically used today for
accessing these functions. Even though SSPs may use lower layer
security mechanisms to guarantee some of those security
properties, candidate protocols for the LUF and LRF must meet the
above requirements.
5.2. Security Properties for the SIP signaling exchanges
The SIP signaling exchanges are out of scope of this document. This
section describes some of the security properties that are desirable
in the context of SIP interconnects between SSPs without formulating
any normative requirements.
In general, the security properties desirable for the SIP exchanges
in an inter-domain context apply to session peering. These include:
o securing the transport of SIP messages between the peers' SBEs.
Authentication of SIP communications is desirable, especially in
the context of session peering involving SIP intermediaries. Data
confidentiality and integrity of the SIP message body may be
desirable as well given some of the levels of session peering
indirection (indirect/assisted peering), but they could be harmful
as they may prevent intermediary SSPs from "inserting" SBEs/DBEs
along the signaling and data paths.
o providing an Authentication Service to authenticate the identity
of connected users based on the SIP Service Provider domains (for
both the SIP requests and the responses).
The fundamental mechanisms for securing SIP between proxy servers
intra- and inter-domain are applicable to session peering; refer to
Section 26.2 of [RFC3261] for transport-layer security of SIP
messages using TLS, [I-D.ietf-sip-connect-reuse] for establishing TLS
connections between proxies, [RFC4474] for the protocol mechanisms to
verify the identity of the senders of SIP requests in an inter-domain
context, and [RFC4916] for verifying the identity of the sender of
SIP responses).
Mule Expires April 20, 2009 [Page 13]
Internet-Draft SPEERMINT Requirements October 2008
5.3. End-to-End Media Security
Media security is critical to guarantee end-to-end confidentiality of
the communication between the end-users' devices, independently of
how many direct or indirect peers are present along the signaling
path. A number of desirable security properties emerge from this
goal.
The establishment of media security may be achieved along the media
path and not over the signaling path given the indirect peering use
cases.
For example, media carried over the Real-Time Protocol (RTP) can be
secured using secure RTP (SRTP [RFC3711]). A framework for
establishing SRTP security using Datagram TLS [RFC4347] is described
in [I-D.ietf-sip-dtls-srtp-framework]: it allows for end-to-end media
security establishment using extensions to DTLS
([I-D.ietf-avt-dtls-srtp]).
It should also be noted that media can be carried in numerous
protocols other than RTP such as SIP (SIP MESSAGE method), MSRP,
XMPP, etc., over TCP ([RFC4571]), and that it can be encrypted over
secure connection-oriented transport sessions over TLS ([RFC4572]).
A desirable security property for session peering is for SIP entities
to be transparent to the end-to-end media security negotiations: SIP
entities should not intervene in the Session Description Protocol
(SDP) exchanges for end-to-end media security.
o Requirement #17:
The protocols used to enable session peering MUST NOT interfere
with the exchanges of media security attributes in SDP. Media
attribute lines that are not understood by SBEs MUST be ignored
and passed along the signaling path untouched.
Mule Expires April 20, 2009 [Page 14]
Internet-Draft SPEERMINT Requirements October 2008
6. Acknowledgments
This document is based on the input and contributions made by a large
number of people in the SPEERMINT working group, including: Edwin
Aoki, Scott Brim, John Elwell, Mike Hammer, Avshalom Houri, Richard
Shocky, Henry Sinnreich, Richard Stastny, Patrik Faltstrom, Otmar
Lendl, Daryl Malas, Dave Meyer, Sriram Parameswar, Jon Peterson,
Jason Livingood, Bob Natale, Benny Rodrig, Brian Rosen, Eric
Rosenfeld, Adam Uzelac, and David Schwartz.
Specials thanks go to Rohan Mahy, Brian Rosen, John Elwell for their
initial drafts describing guidelines or best current practices in
various environments, to Avshalom Houri, Edwin Aoki and Sriram
Parameswar for authoring the presence and instant messaging
requirements and to Dan Wing for providing detailed feedback on the
security consideration sections.
Mule Expires April 20, 2009 [Page 15]
Internet-Draft SPEERMINT Requirements October 2008
7. IANA Considerations
This document does not register any values in IANA registries.
Mule Expires April 20, 2009 [Page 16]
Internet-Draft SPEERMINT Requirements October 2008
8. References
8.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
8.2. Informative References
[I-D.ietf-avt-dtls-srtp]
McGrew, D. and E. Rescorla, "Datagram Transport Layer
Security (DTLS) Extension to Establish Keys for Secure
Real-time Transport Protocol (SRTP)",
draft-ietf-avt-dtls-srtp-05 (work in progress),
September 2008.
[I-D.ietf-pmol-sip-perf-metrics]
Malas, D., "SIP End-to-End Performance Metrics",
draft-ietf-pmol-sip-perf-metrics-01 (work in progress),
June 2008.
[I-D.ietf-sip-connect-reuse]
Mahy, R., Gurbani, V., and B. Tate, "Connection Reuse in
the Session Initiation Protocol (SIP)",
draft-ietf-sip-connect-reuse-11 (work in progress),
July 2008.
[I-D.ietf-sip-dtls-srtp-framework]
Fischl, J., Tschofenig, H., and E. Rescorla, "Framework
for Establishing an SRTP Security Context using DTLS",
draft-ietf-sip-dtls-srtp-framework-04 (work in progress),
October 2008.
[I-D.ietf-sip-hitchhikers-guide]
Rosenberg, J., "A Hitchhiker's Guide to the Session
Initiation Protocol (SIP)",
draft-ietf-sip-hitchhikers-guide-05 (work in progress),
February 2008.
[I-D.ietf-speermint-architecture]
Penno, R., "SPEERMINT Peering Architecture",
draft-ietf-speermint-architecture-06 (work in progress),
May 2008.
[I-D.ietf-speermint-consolidated-presence-im-usecases]
Houri, A., "Presence & Instant Messaging Peering Use
Cases",
draft-ietf-speermint-consolidated-presence-im-usecases-05
Mule Expires April 20, 2009 [Page 17]
Internet-Draft SPEERMINT Requirements October 2008
(work in progress), July 2008.
[I-D.ietf-speermint-terminology]
Malas, D. and D. Meyer, "SPEERMINT Terminology",
draft-ietf-speermint-terminology-16 (work in progress),
February 2008.
[I-D.ietf-speermint-voip-consolidated-usecases]
Uzelac, A. and Y. Lee, "VoIP SIP Peering Use Cases",
draft-ietf-speermint-voip-consolidated-usecases-10 (work
in progress), August 2008.
[I-D.niccolini-speermint-voipthreats]
Niccolini, S., Chen, E., and J. Seedorf, "SPEERMINT
Security Threats and Suggested Countermeasures",
draft-niccolini-speermint-voipthreats-04 (work in
progress), July 2008.
[RFC2198] Perkins, C., Kouvelas, I., Hodson, O., Hardman, V.,
Handley, M., Bolot, J., Vega-Garcia, A., and S. Fosse-
Parisis, "RTP Payload for Redundant Audio Data", RFC 2198,
September 1997.
[RFC3261] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston,
A., Peterson, J., Sparks, R., Handley, M., and E.
Schooler, "SIP: Session Initiation Protocol", RFC 3261,
June 2002.
[RFC3263] Rosenberg, J. and H. Schulzrinne, "Session Initiation
Protocol (SIP): Locating SIP Servers", RFC 3263,
June 2002.
[RFC3365] Schiller, J., "Strong Security Requirements for Internet
Engineering Task Force Standard Protocols", BCP 61,
RFC 3365, August 2002.
[RFC3455] Garcia-Martin, M., Henrikson, E., and D. Mills, "Private
Header (P-Header) Extensions to the Session Initiation
Protocol (SIP) for the 3rd-Generation Partnership Project
(3GPP)", RFC 3455, January 2003.
[RFC3550] Schulzrinne, H., Casner, S., Frederick, R., and V.
Jacobson, "RTP: A Transport Protocol for Real-Time
Applications", STD 64, RFC 3550, July 2003.
[RFC3603] Marshall, W. and F. Andreasen, "Private Session Initiation
Protocol (SIP) Proxy-to-Proxy Extensions for Supporting
the PacketCable Distributed Call Signaling Architecture",
Mule Expires April 20, 2009 [Page 18]
Internet-Draft SPEERMINT Requirements October 2008
RFC 3603, October 2003.
[RFC3611] Friedman, T., Caceres, R., and A. Clark, "RTP Control
Protocol Extended Reports (RTCP XR)", RFC 3611,
November 2003.
[RFC3702] Loughney, J. and G. Camarillo, "Authentication,
Authorization, and Accounting Requirements for the Session
Initiation Protocol (SIP)", RFC 3702, February 2004.
[RFC3711] Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K.
Norrman, "The Secure Real-time Transport Protocol (SRTP)",
RFC 3711, March 2004.
[RFC3824] Peterson, J., Liu, H., Yu, J., and B. Campbell, "Using
E.164 numbers with the Session Initiation Protocol (SIP)",
RFC 3824, June 2004.
[RFC3966] Schulzrinne, H., "The tel URI for Telephone Numbers",
RFC 3966, December 2004.
[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
Resource Identifier (URI): Generic Syntax", STD 66,
RFC 3986, January 2005.
[RFC4347] Rescorla, E. and N. Modadugu, "Datagram Transport Layer
Security", RFC 4347, April 2006.
[RFC4474] Peterson, J. and C. Jennings, "Enhancements for
Authenticated Identity Management in the Session
Initiation Protocol (SIP)", RFC 4474, August 2006.
[RFC4566] Handley, M., Jacobson, V., and C. Perkins, "SDP: Session
Description Protocol", RFC 4566, July 2006.
[RFC4571] Lazzaro, J., "Framing Real-time Transport Protocol (RTP)
and RTP Control Protocol (RTCP) Packets over Connection-
Oriented Transport", RFC 4571, July 2006.
[RFC4572] Lennox, J., "Connection-Oriented Media Transport over the
Transport Layer Security (TLS) Protocol in the Session
Description Protocol (SDP)", RFC 4572, July 2006.
[RFC4916] Elwell, J., "Connected Identity in the Session Initiation
Protocol (SIP)", RFC 4916, June 2007.
Mule Expires April 20, 2009 [Page 19]
Internet-Draft SPEERMINT Requirements October 2008
Appendix A. Policy Parameters for Session Peering
This informative section lists various types of parameters that
should be considered by implementers when deciding what configuration
variables to expose to system administrators or management stations,
as well as SSPs or federations of SSPs when discussing the technical
part of a session peering policy.
In the context of session peering, a policy can be defined as the set
of parameters and other information needed by an SSP to exchange
traffic with another peer. Some of the session policy parameters may
be statically exchanged and set throughout the lifetime of the
peering relationship. Others parameters may be discovered and
updated dynamically using by some explicit protocol mechanisms.
These dynamic parameters may be session-dependent, or the may apply
over multiple sessions or peers.
Various types of policy information may need to be discovered or
exchanged in order to establish session peering. At a minimum, a
policy should specify information related to session establishment
data in order to avoid session establishment failures. A policy may
also include information related to QoS, billing and accounting,
layer-3 related interconnect requirements which are out of the scope
of this document.
Some aspects of session peering policies must be agreed to and
manually implemented; they are static and are typically documented as
part of a business contract, technical document or agreement between
parties. For some parameters linked to protocol support and
capabilities, standard ways of expressing those policy parameters may
be defined among SSP and exchanged dynamically. For e.g., templates
could be created in various document formats so that it could be
possible to dynamically discover some of the domain policy. Such
templates could be initiated by implementers (for each software/
hardware release, a list of supported RFCs, RFC parameters is
provided in a standard format) and then adapted by each SSP based on
its service description, server or device configurations and variable
based on peer relationships.
A.1. Categories of Parameters for VoIP Session Peering and
Justifications
The following list should be considered as an initial list of
"discussion topics" to be addressed by peers when initiating a VoIP
peering relationship.
Mule Expires April 20, 2009 [Page 20]
Internet-Draft SPEERMINT Requirements October 2008
o IP Network Connectivity:
Session peers should define how the IP network connectivity
between their respective SBEs and DBEs. While this is out of
scope of session peering, SSPs must agree on a common mechanism
for IP transport of session signaling and media. This may be
accomplish via private (e.g. IPVPN, IPsec, etc.) or public IP
networks.
o Media-related Parameters:
* Media Codecs: list of supported media codecs for audio, real-
time fax (version of T.38, if applicable), real-time text (RFC
4103), DTMF transport, voice band data communications (as
applicable) along with the supported or recommended codec
packetization rates, level of RTP payload redundancy, audio
volume levels, etc.
* Media Transport: level of support for RTP-RTCP [RFC3550], RTP
Redundancy (RTP Payload for Redundant Audio Data - [RFC2198]) ,
T.38 transport over RTP, etc.
* Media variability at the Signaling path Border Elements: list
of media types supported by the various ingress points of a
peer's network.
* Other: support of the VoIP metric block as defined in RTP
Control Protocol Extended Reports [RFC3611] , etc.
o SIP:
* A session peering policy should include the list of supported
and required SIP RFCs, supported and required SIP methods
(including private p headers if applicable), error response
codes, supported or recommended format of some header field
values , etc.
* It should also be possible to describe the list of supported
SIP RFCs by various functional groupings. A group of SIP RFCs
may represent how a call feature is implemented (call hold,
transfer, conferencing, etc.), or it may indicate a functional
grouping as in [I-D.ietf-sip-hitchhikers-guide].
o Accounting:
Methods used for call or session accounting should be specified.
An SSP may require a peer to track session usage. It is critical
for peers to determine whether the support of any SIP extensions
for accounting is a pre-requisite for SIP interoperability. In
some cases, call accounting may feed data for billing purposes but
Mule Expires April 20, 2009 [Page 21]
Internet-Draft SPEERMINT Requirements October 2008
not always: some operators may decide to use accounting as a 'bill
and keep' model to track session usage and monitor usage against
service level agreements.
[RFC3702] defines the terminology and basic requirements for
accounting of SIP sessions. A few private SIP extensions have
also been defined and used over the years to enable call
accounting between SSP domains such as the P-Charging* headers in
[RFC3455], the P-DCS-Billing-Info header in [RFC3603], etc.
o Performance Metrics:
Layer-5 performance metrics should be defined and shared between
peers. The performance metrics apply directly to signaling or
media; they may be used pro-actively to help avoid congestion,
call quality issues or call signaling failures, and as part of
monitoring techniques, they can be used to evaluate the
performance of peering exchanges.
Examples of SIP performance metrics include the maximum number of
SIP transactions per second on per domain basis, Session
Completion Rate (SCR), Session Establishment Rate (SER), etc.
Some SIP end-to-end performance metrics are defined in
[I-D.ietf-pmol-sip-perf-metrics]; a subset of these may be
applicable to session peering and interconnects.
Some media-related metrics for monitoring VoIP calls have been
defined in the VoIP Metrics Report Block, in Section 4.7 of
[RFC3611].
o Security:
An SSP should describe the security requirements that other peers
must meet in order to terminate calls to its network. While such
a list of security-related policy parameters often depends on the
security models pre-agreed to by peers, it is expected that these
parameters will be discoverable or signaled in the future to allow
session peering outside SSP clubs. The list of security
parameters may be long and composed of high-level requirements
(e.g. authentication, privacy, secure transport) and low level
protocol configuration elements like TLS parameters.
The following list is not intended to be complete, it provides a
preliminary list in the form of examples:
* Call admission requirements: for some providers, sessions can
only be admitted if certain criteria are met. For example, for
some providers' networks, only incoming SIP sessions signaled
over established IPsec tunnels or presented to the well-known
TLS ports are admitted. Other call admission requirements may
be related to some performance metrics as described above.
Finally, it is possible that some requirements be imposed on
lower layers, but these are considered out of scope of session
peering.
Mule Expires April 20, 2009 [Page 22]
Internet-Draft SPEERMINT Requirements October 2008
* Call authorization requirements and validation: the presence of
a caller or user identity may be required by an SSP. Indeed,
some SSPs may further authorize an incoming session request by
validating the caller's identity against white/black lists
maintained by the service provider or users (traditional caller
ID screening applications or IM white list).
* Privacy requirements: an SSP may demand that its SIP messages
be securely transported by its peers for privacy reasons so
that the calling/called party information be protected. Media
sessions may also require privacy and some SSP policies may
include requirements on the use of secure media transport
protocols such as SRTP, along with some constraints on the
minimum authentication/encryption options for use in SRTP.
* Network-layer security parameters: this covers how IPsec
security associated may be established, the IPsec key exchange
mechanisms to be used and any keying materials, the lifetime of
timed Security Associated if applicable, etc.
* Transport-layer security parameters: this covers how TLS
connections should be established as described in Section
Section 5.
A.2. Summary of Parameters for Consideration in Session Peering
Policies
The following is a summary of the parameters mentioned in the
previous section. They may be part of a session peering policy and
appear with a level of requirement (mandatory, recommended,
supported, ...).
o IP Network Connectivity (assumed, requirements out of scope of
this document)
o Media session parameters:
* Codecs for audio, video, real time text, instant messaging
media sessions
* Modes of communications for audio (voice, fax, DTMF), IM (page
mode, MSRP)
* Media transport and means to establish secure media sessions
* List of ingress and egress DBEs where applicable, including
STUN Relay servers if present
Mule Expires April 20, 2009 [Page 23]
Internet-Draft SPEERMINT Requirements October 2008
o SIP
* SIP RFCs, methods and error responses
* headers and header values
* possibly, list of SIP RFCs supported by groups (e.g. by call
feature)
o Accounting
o Capacity Control and Performance Management: any limits on, or,
means to measure and limit the maximum number of active calls to a
peer or federation, maximum number of sessions and messages per
specified unit time, maximum number of active users or subscribers
per specified unit time, the aggregate media bandwidth per peer or
for the federation, specified SIP signaling performance metrics to
measure and report; media-level VoIP metrics if applicable.
o Security: Call admission control, call authorization, network and
transport layer security parameters, media security parameters
Mule Expires April 20, 2009 [Page 24]
Internet-Draft SPEERMINT Requirements October 2008
Author's Address
Jean-Francois Mule
CableLabs
858 Coal Creek Circle
Louisville, CO 80027
USA
Email: jf.mule@cablelabs.com
Mule Expires April 20, 2009 [Page 25]
Internet-Draft SPEERMINT Requirements October 2008
Full Copyright Statement
Copyright (C) The IETF Trust (2008).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Mule Expires April 20, 2009 [Page 26]
| PAFTECH AB 2003-2026 | 2026-04-24 01:55:51 |