One document matched: draft-ietf-sip-guidelines-08.txt
Differences from draft-ietf-sip-guidelines-07.txt
SIP J. Rosenberg
Internet-Draft dynamicsoft
Expires: January 16, 2005 H. Schulzrinne
Columbia University
July 18, 2004
Guidelines for Authors of Extensions to the Session Initiation
Protocol (SIP)
draft-ietf-sip-guidelines-08
Status of this Memo
By submitting this Internet-Draft, I certify that any applicable
patent or other IPR claims of which I am aware have been disclosed,
and any of which I become aware will be disclosed, in accordance with
RFC 3668.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as
Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on January 16, 2005.
Copyright Notice
Copyright (C) The Internet Society (2004). All Rights Reserved.
Abstract
The Session Initiation Protocol (SIP) is a flexible, yet simple tool
for establishing interactive connections across the Internet. Part
of this flexibility is the ease with which it can be extended. In
order to facilitate effective and interoperable extensions to SIP,
some guidelines need to be followed when developing SIP extensions.
This document outlines a set of such guidelines for authors of SIP
extensions.
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 1]
Internet-Draft SIP Guidelines July 2004
Table of Contents
1. Terminology . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Should I define a SIP Extension? . . . . . . . . . . . . . . 5
3.1 SIP's Solution Space . . . . . . . . . . . . . . . . . . . 5
3.2 SIP Architectural Model . . . . . . . . . . . . . . . . . 7
4. Issues to be Addressed . . . . . . . . . . . . . . . . . . . 10
4.1 Backwards Compatibility . . . . . . . . . . . . . . . . . 10
4.2 Security . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.3 Terminology . . . . . . . . . . . . . . . . . . . . . . . 12
4.4 Syntactic Issues . . . . . . . . . . . . . . . . . . . . . 13
4.5 Semantics, Semantics, Semantics . . . . . . . . . . . . . 15
4.6 Examples Section . . . . . . . . . . . . . . . . . . . . . 16
4.7 Overview Section . . . . . . . . . . . . . . . . . . . . . 16
4.8 IANA Considerations Section . . . . . . . . . . . . . . . 16
4.9 Document Naming Conventions . . . . . . . . . . . . . . . 17
4.10 Additional Considerations for New Methods . . . . . . . 18
4.11 Additional Considerations for New Header Fields or
Header Field Parameters . . . . . . . . . . . . . . . . 19
4.12 Additional Considerations for New Body Types . . . . . . 19
5. Interactions with SIP Features . . . . . . . . . . . . . . . 20
6. Security Considerations . . . . . . . . . . . . . . . . . . 21
7. IANA Considerations . . . . . . . . . . . . . . . . . . . . 22
8. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 23
9. References . . . . . . . . . . . . . . . . . . . . . . . . . 24
9.1 Normative References . . . . . . . . . . . . . . . . . . . . 24
9.2 Informative References . . . . . . . . . . . . . . . . . . . 24
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . 26
Intellectual Property and Copyright Statements . . . . . . . 27
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 2]
Internet-Draft SIP Guidelines July 2004
1. Terminology
In this document, the key words "MUST", "MUST NOT", "REQUIRED",
"SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY",
and "OPTIONAL" are to be interpreted as described in RFC 2119 [1] and
indicate requirement levels for compliant implementations.
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 3]
Internet-Draft SIP Guidelines July 2004
2. Introduction
The Session Initiation Protocol (SIP) [2] is a flexible, yet simple
tool for establishing interactive connections across the Internet.
Part of this flexibility is the ease with which it can be extended
(with new methods, new header fields, new body types, and new
parameters), and there have been countless proposals that have been
made to do just that. An IETF process has been put into place which
defines how extensions are to be made to the SIP protocol [8]. That
process is designed to ensure that extensions are made which are
appropriate for SIP (as opposed to being done in some other
protocol), that these extensions fit within the model and framework
provided by SIP and are consistent with its operation, and that these
extensions solve problems generically rather than for a specific use
case. However, [8] does not provide the technical guidelines needed
to assist that process. This specification helps to meet that need.
This specification first provides a set of guidelines to help decide
whether a certain piece of functionality is appropriately done in
SIP. Assuming the functionality is appropriate, it then points out
issues which extensions should deal with from within their
specification. Finally, it discusses common interactions with
existing SIP features which often cause difficulties in extensions.
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 4]
Internet-Draft SIP Guidelines July 2004
3. Should I define a SIP Extension?
The first question to be addressed when defining a SIP extension is:
is a SIP extension the best solution to my problem? SIP has been
proposed as a solution for numerous problems, including mobility,
configuration and management, QoS control, call control, caller
preferences, device control, third party call control, and MPLS path
setup, to name a few. Clearly, not every problem can be solved by a
SIP extension. More importantly, some problems that could be solved
by a SIP extension, probably shouldn't.
To assist engineers in determining whether a SIP extension is an
appropriate solution to their problem, we present two broad criteria.
First, the problem SHOULD fit into the general purvey of SIP's
solution space. Secondly, the solution MUST conform to the general
SIP architectural model.
While the first criteria might seem obvious, we have observed that
numerous extensions to SIP have been proposed because some function
is needed in a device which also speaks SIP. The argument is
generally given that "I'd rather implement one protocol than many".
As an example, user agents, like all other IP hosts, need some way to
obtain their IP address. This is generally done through DHCP [9].
SIP's multicast registration mechanisms might supply an alternate way
to obtain an IP address. This would eliminate the need for DHCP in
clients. However, we do not believe such extensions are appropriate.
We believe that protocols should be defined to provide specific,
narrow functions, rather than being defined based on all protocols
needed between a pair of devices. The latter approach to protocol
design yields modular protocols with broad application. It also
facilitates extensibility and growth; single protocols can be removed
and changed without affecting the entire system. We observe that
this approach to protocol engineering mirrors object oriented
software engineering.
Our second criteria, that the extension must conform to the general
SIP architectural model, ensures that the protocol remains manageable
and broadly applicable.
3.1 SIP's Solution Space
In order to evaluate the first criteria, it is necessary to define
exactly what SIP's solution space is, and what it is not.
SIP is a protocol for initiating, modifying, and terminating
interactive sessions. This process involves the discovery of users,
(or more generally, entities that can be communicated with, including
services, such as voicemail or translation devices) wherever they may
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 5]
Internet-Draft SIP Guidelines July 2004
be located, so that a description of the session can be delivered to
the user. It is assumed that these users or communications entities
are mobile, and their point of attachment to the network changes over
time. The primary purpose of SIP is a rendezvous function, to allow
a request initiator to deliver a message to a recipient wherever they
may be. Such rendezvous is needed to establish a session, but can be
used for other purposes related to communications, such as querying
for capabilities or delivery of an instant message.
Much of SIP focuses on this discovery and rendezvous component. Its
ability to fork, its registration capabilities, and its routing
capabilities are all present for the singular purpose of finding the
desired user wherever they may be. As such, features and
capabilities such as personal mobility, automatic call distribution,
and follow-me are well within the SIP solution space.
Session initiation also depends on the ability of the called party to
have enough information about the session itself in order to make a
decision on whether to join or not. That information includes data
about the caller, the purpose for the invitation, and parameters of
the session itself. For this reason, SIP includes this kind of
information.
Part of the process of session initiation is the communication of
progress and the final results of establishment of the session. SIP
provides this information as well.
SIP itself is independent of the session, and the session description
is delivered as an opaque body within SIP messages. Keeping SIP
independent of the sessions it initiates and terminates is
fundamental. As such, there are many functions that SIP explicitly
does not provide. It is not a session management protocol or a
conference control protocol. The particulars of the communications
within the session are outside of SIP. This includes features such
as media transport, voting and polling, virtual microphone passing,
chairman election, floor control, and feedback on session quality.
SIP is not a resource reservation protocol for sessions. This is
fundamentally because (1) SIP is independent of the underlying
session it establishes, and (2) the path of SIP messages is
completely independent from the path that session packets may take.
The path independence refers to paths within a provider's network and
the set of providers itself. For example, it is perfectly reasonable
for a SIP message to traverse a completely different set of
autonomous systems than the audio in a session SIP establishes.
SIP is not a general purpose transfer protocol. It is not meant to
send large amounts of data unrelated to SIP's operation. It is not
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 6]
Internet-Draft SIP Guidelines July 2004
meant as a replacement for HTTP. This is not to say that carrying
payloads in SIP messages is never a good thing; in many cases, the
data is very much related to SIP's operation. In those cases,
congestion controlled transports end-to-end are critical.
SIP is not meant to be a general Remote Procedure Call (RPC)
mechanism. None of its user discovery and registration capabilities
are needed for RPC, neither are most of its proxy functions.
SIP is not meant to be used as a strict Public Switched Telephone
Network (PSTN) signaling replacement. It is not a superset of the
Integrated Services Digital Network (ISDN) User Part (ISUP). While
it can support gatewaying of PSTN signaling, and can provide many
features present in the PSTN, the mere existence of a feature or
capability in the PSTN is not a justification for its inclusion in
SIP. Extensions needed to support telephony MUST meet the other
criteria described here.
SIP is a poor control protocol. It is not meant to be used for one
entity to tell another to pick up or answer a phone, send audio using
a particular codec, or to provide a new value for a configuration
parameter. Control protocols have different trust relationships than
is assumed in SIP, and are more centralized in architecture than SIP,
which is a very distributed protocol.
There are many network layer services needed to make SIP function.
These include quality of service, mobility, and security, among
others. Rather than building these capabilities into SIP itself,
they SHOULD be developed outside of SIP, and then used by it.
Specifically, any protocol mechanisms that are needed by SIP, but are
also needed by many other application layer protocols, SHOULD NOT be
addressed within SIP.
3.2 SIP Architectural Model
We describe here some of the primary architectual assumptions which
underly SIP. Extensions which violate these assumptions should be
examined more carefully to determine their appropriateness for SIP.
Session independence: SIP is independent of the session it
establishes. This includes the type of session, be it audio,
video, game, chat session, or virtual reality. SIP operation
SHOULD NOT be dependent on some characteristic of the session.
SIP is not specific to voice only. Any extensions to SIP MUST
consider the application of SIP to a variety of different session
types.
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 7]
Internet-Draft SIP Guidelines July 2004
SIP and Session Path Independence: We have already touched on this
once, but it is worth noting again. The set of routers and/or
networks and/or autonomous systems traversed by SIP messages are
unrelated to the set of routers and/or networks and/or autonomous
systems traversed by session packets. They may be the same in
some cases, but it is fundamental to SIP's architecture that they
need not be the same. Extensions which only work under some
assumption of overlap are not generally applicable to SIP's
operation and should be scrutinized carefully.
Multi-provider and Multi-hop: SIP assumes that its messages will
traverse the Internet. That is, SIP works through multiple
networks administered by different providers. It is also assumed
that SIP messages traverse many hops (where each hop is a proxy).
Extensions SHOULD NOT work only under the assumption of a single
hop or single provider.
Transactional: SIP is a request/response protocol, possibly enhanced
with intermediate responses. Many of the rules of operation in
SIP are based on general processing of requests and responses.
This includes the reliability mechanisms, routing mechanisms, and
state maintenance rules. Extensions SHOULD NOT add messages that
are not within the request-response model.
Proxies can ignore bodies: In order for proxies to scale well, they
must be able to operate with minimal message processing. SIP has
been engineered so that proxies can always ignore bodies.
Extensions SHOULD NOT require proxies to examine bodies.
Proxies don't need to understand the method: Processing of requests
in proxies does not depend on the method, except for the well
known methods INVITE, ACK, and CANCEL. This allows for
extensibility. Extensions MUST NOT define new methods which must
be understood by proxies.
INVITE messages carry full state: An initial INVITE message for a
session is nearly identical (the exception is the tag) to a
re-INVITE message to modify some characteristic of the session.
This full state property is fundamental to SIP, and is critical
for robustness of SIP systems. Extensions SHOULD NOT modify
INVITE processing such that data spanning multiple INVITEs must be
collected in order to perform some feature.
Generality over efficiency: Wherever possible, SIP has favored
general purpose components rather than narrow ones. If some
capability is added to support one service, but a slightly broader
capability can support a larger variety of services (at the cost
of complexity or message sizes), the broader capability SHOULD be
preferred.
The Request URI is the primary key for forwarding: Forwarding logic
at SIP servers depends primarily on the request URI (this is
different from request routing in SIP, which uses the Route header
fields to pass a request through intermediate proxies). It is
fundamental to the operation of SIP that the request URI indicate
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 8]
Internet-Draft SIP Guidelines July 2004
a resource that, under normal operations, resolves to the desired
recipient. Extensions SHOULD NOT modify the semantics of the
request URI.
Heterogeneity is the norm: SIP supports hetereogeneous devices. It
has built in mechanisms for determining the set of overlapping
protocol functionalities. Extensions SHOULD NOT be defined which
only function if all devices support the extension.
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 9]
Internet-Draft SIP Guidelines July 2004
4. Issues to be Addressed
Given an extension has met the litmus tests in the previous section,
there are several issues that all extensions should take into
consideration.
4.1 Backwards Compatibility
One of the most important issues to consider is whether the new
extension is backwards compatible with baseline SIP. This is tightly
coupled with how the Require, Proxy-Require, and Supported header
fields are used.
If an extension consists of new header fields or header field
parameters inserted by a user agent in a request with an existing
method, and the request cannot be processed reasonably by a proxy
and/or user agent without understanding the header fields or
parameters, the extension MUST mandate the usage of the Require and/
or Proxy-Require header fields in the request. These extensions are
not backwards compatible with SIP. The result of mandating usage of
these header fields means that requests cannot be serviced unless the
entities being communicated with also understand the extension. If
some entity does not understand the extension, the request will be
rejected. The UAC can then handle this in one of two ways. In the
first, the request simply fails, and the service cannot be provided.
This is basically an interoperability failure. In the second case,
the UAC retries the request without the extension. This will
preserve interoperability, at the cost of a "dual stack"
implementation in a UAC (processing rules for operation with and
without the extension). As the number of extensions increases, this
leads to an exponential explosion in the sets of processing rules a
UAC may need to implement. The result is excessive complexity.
Because of the possibility of interoperability and complexity
problems that result from the usage of Require and Proxy-Require, we
believe the following guidelines are appropriate:
o The usage of these header fields in requests for basic SIP
services (in particular, session initiation and termination) is
NOT RECOMMENDED. The less frequently a particular extension is
needed in a request, the more reasonable it is to use these header
fields.
o The Proxy-Require header field SHOULD be avoided at all costs.
The failure likelihood in an individual proxy stays constant, but
the path failure grows exponentially with the number of hops. On
the other hand, the Require header field only mandates that a
single entity, the UAS, support the extension. Usage of
Proxy-Require is thus considered exponentially worse than usage of
the Require header field.
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 10]
Internet-Draft SIP Guidelines July 2004
o If either Require or Proxy-Require are used by an extension, the
extension SHOULD discuss how to fall back to baseline SIP
operation if the request is rejected with a 420 response.
Extensions which define new methods do not need to use the Require
header field. SIP defines mechanisms which allow a UAC to know
whether a new method is understood by a UAS. This includes both the
OPTIONS request, and the 405 (Method Not Allowed) response with the
Allow header field. It is fundamental to SIP that proxies do not
need to understand the semantics of a new method in order to process
it. If an extension defines a new method which must be understood by
proxies in order to be processed, a Proxy-Require header field is
needed. As discussed above, these kinds of extensions are frowned
upon.
In order to achieve backwards compatibility for extensions that
define new methods, the Allow header field is used. There are two
types of new methods - those that are used for established dialogs
(initiated by INVITE, for example), and those that are sent as the
initial request to a UA. Since INVITE and its response both SHOULD
contain an Allow header field, a UA can readily determine whether the
new method can be supported within the dialog. For example, once an
INVITE dialog is established, a user agent could determine if the
REFER method [10] is supported if it is present in an Allow header.
If it was, the "transfer" button on the UI could be "greyed out" once
the call is established.
Another type of extension are those which require a proxy to insert
header fields or header field parameters into a request as it
traverses the network, or for the UAS to insert header fields or
header field parameters into a response. For some extensions, if the
UAC or UAS does not understand these header fields, the message can
still be processed correctly. These extensions are completely
backwards compatible.
Most other extensions of this type require that the server only
insert the header field or parameter if it is sure the client
understands it. In this case, these extensions will need to make use
of the Supported request header field mechanism. This mechanism
allows a server to determine if the client can understand some
extension, so that it can apply the extension to the response. By
their nature, these extensions may not always be able to be applied
to every response.
If an extension requires a proxy to insert a header field or
parameter into a request, and this header field or parameter needs to
be understood by both UAC and UAS to be executed correctly, a
combination of the Require and the Supported mechanism will need to
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 11]
Internet-Draft SIP Guidelines July 2004
be used. The proxy can insert a Require header field into the
request, given the Supported header field is present. An example of
such an extension is the SIP Session Timer [11].
Yet another type of extension is that which defines new body types to
be carried in SIP messages. According to the SIP specification,
bodies must be understood in order to process a request. As such,
the interoperability issues are similar to new methods. However, the
Content-Disposition header field has been defined to allow a client
or server to indicate that the message body is optional [2]. Usage
of optional bodies, as opposed to mandatory ones, is RECOMMENDED
wherever possible.
When a body must be understood to properly process a request or
response, it is preferred that the sending entity know ahead of time
whether the new body is understood by the recipient. For requests
that establish a dialog, inclusion of Accept in the request and its
success responses is RECOMMENDED. This will allow both parties to
determine what body types are supported by their peers. Subsequent
messaging between the peers would then only include body types that
were indicated as being understood.
4.2 Security
Security is an important component of any protocol. Designers of SIP
extensions need to carefully consider if additional security
requirements are required over those described in RFC 3261.
Frequently authorization requirements, and requirements for
end-to-end integrity are the most overlooked.
SIP extensions MUST consider how (or if) they affect usage of the
general SIP security mechanisms. Most extensions should not require
any new security capabilities beyond general purpose SIP. If they
do, it is likely that the security mechanism has more general purpose
application, and should be considered an extension in its own right.
4.3 Terminology
RFC 3261 has an extensive terminology section that defines terms like
caller, callee, user agent, header field, and so on. All SIP
extensions MUST conform to this terminology. They MUST NOT define
new terms that describe concepts already defined by a term in another
SIP specification. If new terminology is needed, it SHOULD appear in
a separate section towards the beginning of the document.
Careful attention must be paid to the actual usage of terminology.
Many documents misuse the terms header, header field, and header
field values, for example. Document authors SHOULD do a careful
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 12]
Internet-Draft SIP Guidelines July 2004
review of their documents for proper usage of these terms.
4.4 Syntactic Issues
Extensions that define new methods SHOULD use all capitals for the
method name. Method names SHOULD be less than 10 characters, and
SHOULD attempt to convey the general meaning of the request.
Method names are case sensitive, and therefore there is no
requirement that they be capitalized. However, using capitalized
method names keeps with a long-standing convention in SIP and many
similar protocols, such as HTTP [13] and RTSP [14]
Extensions that define new header fields that are anticipated to be
heavily used SHOULD define a compact form if those header fields are
more than four characters. Compact header fields MUST be a single
character. When all 26 characters are exhausted, new compact forms
will no longer be defined. Header field names SHOULD be composed
primarily of ASCII characters and marks. They SHOULD be descriptive
but reasonably brief. Although header field names are case
insensitive, a single common capitalization SHOULD be used throughout
the document. It is RECOMMENDED that each English word present in
the header field name have its first letter capitalized. For
example, "ThisIsANewHeader".
As an example, the following are poor choices for header field names:
ThisIsMyNewHeaderThatDoesntDoVeryMuchButItHasANiceName
--.!A
Function
Case sensitivity of parameters and values is a constant source of
confusion, a difficulty that plagued RFC 2543 [15]. This has been
made simple through the usage of the BNF constructs of RFC 2234 [5],
which have clear rules of case sensivitity and insensitivity.
Therefore, the BNF for an extension completely defines the matching
rules.
Extensions MUST be consistent with the SIP conventions for case
sensitivity. Methods MUST be case sensitive. Header field names
MUST be case insensitive. Header field parameter names MUST be case
insensitive. Header field values and parameter values are sometimes
case sensitive, and sometimes case insensitive. However, generally
they SHOULD be case insensitive. Definiting a case sensitive
component requires explicitly listing each character through its
ASCII code.
Extensions which contain freeform text MUST allow that text to be
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 13]
Internet-Draft SIP Guidelines July 2004
UTF-8, as per the IETF policies on character set usage [3]. This
ensures that SIP remains an internationalized standard. As a general
guideline, freeform text is never needed by programs in order to
perform protocol processing. It is usually entered by and displayed
to the user. If an extension uses a parameter which can contain
UTF-8 encoded characters, and that extension requires a comparison to
be made of this parameter to other parameters, the comparison MUST be
case sensitive. Case insensitive comparison rules for UTF-8 text
are, at this time, impossible and MUST be avoided.
Extensions which make use of dates MUST use the SIP-Date BNF defined
in RFC 3261. No other date formats are allowed. However, the usage
of absolute dates in order to determine intervals (for example, the
time at which some timer fires) is NOT RECOMMENDED. This is because
it requires synchronized time between peers, and this is frequently
not the case. Therefore, relative times, expressed in numbers of
seconds, SHOULD be used.
Extensions which include network layer addresses SHOULD permit dotted
quad IPv4 addresses, IPv6 addresses in the format described in [4],
and domain names.
Extensions which have header fields containing URIs SHOULD allow any
URI, not just SIP URIs.
Header fields MUST follow the standard formatting for SIP, defined
as:
header = header-name HCOLON header-value
*(COMMA header-value)
header-name = token
header-value = value *(SEMI value-parameter)
value-parameter = token [EQUAL gen-value]
gen-value = token / host / quoted-string
value = token / host / quoted-string
In some cases, this form is not sufficient. That is the case for
header fields that express descriptive text meant for human
consumption. An example is the Subject header field in SIP [2]. In
this case, an alternate form is:
header = header-name HCOLON [TEXT-UTF8-TRIM]
Developers of extensions SHOULD allow for extension parameters in
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 14]
Internet-Draft SIP Guidelines July 2004
their header fields.
Header fields that contain a list of URIs SHOULD follow the same
syntax as the Contact header field in SIP. Implementors are also
encouraged to always wrap these URI in angle brackets "<" and ">".
We have found this to be a frequently misimplemented feature.
Beyond compact form, there is no need to define compressed versions
of header field values. Compression of SIP messages SHOULD be
handled at lower layers, for example, using IP payload compression
[16] or signalling compression [18].
Syntax for header fields is expressed in Augmented Backus-Naur Form
and MUST follow the format of RFC 2234 [5]. Extensions MUST make use
of the primitive components defined in RFC 3261 [2]. If the
construction for a BNF element is defined in another specification,
it is RECOMMENDED that the construction be referenced rather than
copied. The reference SHOULD include both the document and section
number. All BNF elements must be either defined or referenced.
It is RECOMMENDED that BNF be collected into a single section near
the end of the document.
All tokens and quoted strings are separated by explicit linear white
space. Linear white space, for better or worse, allows for line
folding. Extensions MUST NOT define new header fields that use
alternate linear white space rules.
All SIP extensions MUST verify that any BNF productions that they
define in their grammar do not conflict with any existing grammar
defined in other SIP standards track specifications.
4.5 Semantics, Semantics, Semantics
Developers of protocols often get caught up in syntax issues, without
spending enough time on semantics. The semantics of a protocol are
far more important. SIP extensions MUST clearly define the semantics
of the extensions. Specifically, the extension MUST specify the
behaviors expected of a UAC, UAS and proxy in processing the
extension. This is often best described by having separate sections
for each of these three elements. Each section SHOULD step through
the processing rules in temporal order of the most common messaging
scenario.
Processing rules generally specify actions to take (in terms of
messages to send, variables to store, rules to follow) on receipt of
messages and expiration of timers. If an action requires
transmission of a message, the rule SHOULD outline requirements for
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 15]
Internet-Draft SIP Guidelines July 2004
insertion of header fields or other information in the message.
The extension SHOULD specify procedures to take in exceptional
conditions which are recoverable, or which require some kind of user
intervention. Recovering from unrecoverable problems generally does
not require specification.
4.6 Examples Section
The specification SHOULD contain a section that gives examples of
call flows and message formatting. Extensions which define
substantial new syntax SHOULD include examples of messages containing
that syntax. Examples of message flows should be given to cover
common cases and at least one failure or unusual case.
For an example of how to construct a good examples section, see the
message flows and message formatting defined in the Basic Call Flows
specification [19]. Note that complete messages SHOULD be used. Be
careful to include tags, Via header fields (with the branch ID
cookie), Max-Forwards, Content-Lengths, Record-Route and Route header
fields. Example INVITE messages MAY omit session descriptions, and
Content-Length values MAY be set to "..." to indicate that the value
is not provided. However, the specification MUST explicitly call out
the meaning of the "..." and explicitly indicate that session
descriptions were not included.
4.7 Overview Section
Too often, extension documents dive into detailed syntax and
semantics without giving a general overview of operation. This makes
understanding of the extension harder. It is RECOMMENDED that
extensions have a protocol overview section which discusses the basic
operation of the extension. Basic operation usually consists of the
message flow, in temporal order, for the most common case covered by
the extension. The most important processing rules for the elements
in the call flow SHOULD be mentioned. Usage of the RFC 2119 [1]
terminology in the overview section is NOT RECOMMENDED, and the
specification should explicitly state that the overview is tutorial
in nature only.
4.8 IANA Considerations Section
Documents which define new SIP extensions will invariably have IANA
Considerations sections.
If your extension is defining a new event package, you MUST register
that package. RFC 3265 [6] provides the registration template. See
[20] for an example of the registration of a new event package.
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 16]
Internet-Draft SIP Guidelines July 2004
If your extension is defining a new header field, you MUST register
that header field. RFC 3261 [2] provides a registration template.
See Section 8.2 of RFC 3262 [21] for an example of how to register
new SIP header fields.
If your extension is defining a new response code, you MUST register
that response code. RFC 3261 [2] provides a registration template.
See Section 6.4 of RFC 3329 [17] for an example of how to register a
new response code.
If your extension is defining a new SIP method, you MUST register
that method. RFC 3261 [2] provides a registration template. See
Section 10 of RFC 3311 [22] for an example of how to register a new
SIP method.
Many SIP extensions make use of option tags, carried in the Require,
Proxy-Require and Supported header fields. Section 4.1 discusses
some of the issues involved in the usage of these header fields. If
your extension does require them, you MUST register an option tag for
your extension. RFC 3261 [2] provides a registration template. See
Section 8.1 of RFC 3262 [21] for an example of how to register an
option tag.
Some SIP extensions will require establishment of their own IANA
registries. RFC 2434 [23] provides guidance on how and when IANA
registries are established. For an example of how to set one up, see
Section 6 of RFC 3265 [6] for an example.
4.9 Document Naming Conventions
An important decision to be made about the extension is its title.
The title MUST indicate that the document is an extension to SIP. It
is RECOMMENDED that the title follow the basic form of "A [summary of
function] for the Session Initiation Protocol (SIP)", where the
summary of function is a one to three word description of the
extension. For example, if an extension defines a new header field,
called Make-Coffee, for making coffee, the title would read, "Making
Coffee with the Session Initiation Protocol (SIP)". It is RECOMMENED
that these additional words be descriptive rather than naming the
header field. For example, the extension for making coffee should
not be named "The Make-Coffee Header for the Session Initiation
Protocol".
For extensions that define new methods, an acceptable template for
titles is "The Session Initiation Protocol (SIP) X Method" where X is
the name of the method.
Note that the acronymn SIP MUST be expanded in the titles of RFCs, as
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 17]
Internet-Draft SIP Guidelines July 2004
per [24].
4.10 Additional Considerations for New Methods
Extensions which define new methods SHOULD take into consideration,
and discuss, the following issues:
o Can it contain bodies? If so, what is the meaning of the presence
of those bodies? What body types are allowed?
o Can a transaction with this request method occur while another
transaction, in the same and/or reverse direction, is in progress?
o The extension MUST define which header fields can be present in
requests of that method. It is RECOMMENDED that this information
be represented as a new column of Table 2/3 of RFC 3261 [2]. The
table MUST contain rows for all header fields defined in standards
track RFCs at the time of writing of the extension.
o Can the request be sent within a dialog, or does it establish a
dialog?
o Is it a target refresh request?
o Extensions to SIP that define new methods MAY specify whether
offers and answers can appear in requests of that method or its
responses. However, those extensions MUST adhere to the protocol
rules specified in [25], and MUST adhere to the additional
constraints for offers and answers as specified in SIP [2].
o Because of the nature of reliability treatment of requests with
new methods, those requests need to be answered immediately by the
UAS. Protocol extensions that require longer durations for the
generation of a response (such as a new method that requires human
interaction) SHOULD instead use two transactions - one to send the
request, and another in the reverse direction to convey the result
of the request. An example of that is SUBSCRIBE and NOTIFY [6].
o The SIP specification [2] allows new methods to specify whether
transactions using that new method can be canceled using a CANCEL
request. Further study of the non-INVITE transaction [12] has
determined that non-INVITE transactions must complete as soon as
possible. New methods must not plan for the transaction to pend
long enough for CANCEL to be meaningful. Thus, new methods MUST
declare that transactions initiated by requests with that method
cannot be canceled. Future work may relax this restriction, at
which point these guidelines will be revised.
o New methods that establish a new dialog must discuss the impacts
of forking. The design of such new methods should follow the
pattern of requiring an immediate request in the reverse direction
from the request establishing a dialog, similar to the immediate
NOTIFY sent when a subscription is created per RFC 3265 [6].
The reliability mechanisms for all new methods must be the same as
for BYE. The delayed response feature of INVITE is only available in
INVITE, never for new methods. The design of new methods must
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 18]
Internet-Draft SIP Guidelines July 2004
encourage an immediate response. If the application being enabled
requires a delay, the design SHOULD follow a pattern using multiple
transactions similar to RFC 3265's use of NOTIFYs with different
Subscription-State header field values (pending and active in
particular) in response to SUBSCRIBE [6].
4.11 Additional Considerations for New Header Fields or Header Field
Parameters
The most important issue for extensions that define new header fields
or header field parameters is backwards compatibility. See Section
4.1 for a discussion of the issues. The extension MUST detail how
backwards compatibility is addressed.
It is often tempting to avoid creation of a new method by overloading
an existing method through a header field or parameter. Header
fields and parameters are not meant to fundamentally alter the
meaning of the method of the request. A new header field cannot
change the basic semantic and processing rules of a method. There is
no shortage of method names, so when an extension changes the basic
meaning of a request, a new method SHOULD be defined.
For extensions that define new header fields, the extension MUST
define the request methods the header field can appear in, and what
responses it can be used in. It is RECOMMENDED that this information
be represented as a new row of Table 2/3 of RFC 3261 [2]. The table
MUST contain columns for all methods defined in standards track RFCs
at time of writing of the extension.
4.12 Additional Considerations for New Body Types
Because SIP can run over UDP, extensions that specify the inclusion
of large bodies are frowned upon unless end-to-end congestion
controlled transport can be guaranteed. If at all possible, the
content SHOULD be included indirectly [7] even if congestion
controlled transports are available.
Note that the presence of a body MUST NOT change the nature of the
message. That is, bodies cannot alter the state machinery associated
with processing a request of a particular method or a response.
Bodies enhance this processing by providing additional data.
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 19]
Internet-Draft SIP Guidelines July 2004
5. Interactions with SIP Features
We have observed that certain capabilities of SIP continually
interact with extensions in unusual ways. Writers of extensions
SHOULD consider the interactions of their extensions with these SIP
capabilities, document any unusual interactions if they exist. The
most common causes of problems are:
Forking: Forking by far presents the most troublesome interactions
with extensions. This is generally because it can cause (1) a
single transmitted request to be received by an unknown number of
UASs, and (2) a single INVITE request to have multiple responses.
CANCEL and ACK: CANCEL and ACK are "special" SIP requests, in that
they are exceptions to many of the general request processing
rules. The main reason for this special status is that CANCEL and
ACK are always associated with another request. New methods
SHOULD consider the meaning of cancellation, as described above.
Extensions which defined new header fields in INVITE requests
SHOULD consider whether they also need to be included in ACK and
CANCEL. Frequently they do, in order to allow a stateless proxy
to route the CANCEL or ACK identically to the INVITE.
Routing: The presence of Route header fields in a request can cause
it to be sent through intermediate proxies. Requests that
establish dialogs can be record-routed, so that the initial
request goes through one set of proxies, and subsequent requests
through a different set. These SIP features can interact in
unusual ways with extensions.
Stateless Proxies: SIP allows a proxy to be stateless. Stateless
proxies are unable to retransmit messages and cannot execute
certain services. Extensions which depend on some kind of proxy
processing SHOULD consider how stateless proxies affect that
processing.
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 20]
Internet-Draft SIP Guidelines July 2004
6. Security Considerations
The nature of this document is such that it does not introduce any
new security considerations.
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 21]
Internet-Draft SIP Guidelines July 2004
7. IANA Considerations
There are no IANA considerations associated with this specification.
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 22]
Internet-Draft SIP Guidelines July 2004
8. Acknowledgements
The authors would like to thank Rohan Mahy for his comments. Robert
Sparks contributed important text on CANCEL issues.
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 23]
Internet-Draft SIP Guidelines July 2004
9. References
9.1 Normative References
[1] Bradner, S., "Key words for use in RFCs to Indicate Requirement
Levels", BCP 14, RFC 2119, March 1997.
[2] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A.,
Peterson, J., Sparks, R., Handley, M. and E. Schooler, "SIP:
Session Initiation Protocol", RFC 3261, June 2002.
[3] Alvestrand, H., "IETF Policy on Character Sets and Languages",
BCP 18, RFC 2277, January 1998.
[4] Hinden, R., Carpenter, B. and L. Masinter, "Format for Literal
IPv6 Addresses in URL's", RFC 2732, December 1999.
[5] Crocker, D. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", RFC 2234, November 1997.
[6] Roach, A., "Session Initiation Protocol (SIP)-Specific Event
Notification", RFC 3265, June 2002.
[7] Olson, S., "A Mechanism for Content Indirection in Session
Initiation Protocol (SIP) Messages",
draft-ietf-sip-content-indirect-mech-03 (work in progress), June
2003.
9.2 Informative References
[8] Mankin, A., Bradner, S., Mahy, R., Willis, D., Ott, J. and B.
Rosen, "Change Process for the Session Initiation Protocol
(SIP)", BCP 67, RFC 3427, December 2002.
[9] Droms, R., "Dynamic Host Configuration Protocol", RFC 2131,
March 1997.
[10] Sparks, R., "The Session Initiation Protocol (SIP) Refer
Method", RFC 3515, April 2003.
[11] Donovan, S. and J. Rosenberg, "Session Timers in the Session
Initiation Protocol (SIP)", draft-ietf-sip-session-timer-14
(work in progress), May 2004.
[12] Sparks, R., "Problems identified associated with the Session
Initiation Protocol's non-INVITE Transaction",
draft-sparks-sip-nit-problems-00 (work in progress), February
2004.
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 24]
Internet-Draft SIP Guidelines July 2004
[13] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L.,
Leach, P. and T. Berners-Lee, "Hypertext Transfer Protocol --
HTTP/1.1", RFC 2616, June 1999.
[14] Schulzrinne, H., Rao, A. and R. Lanphier, "Real Time Streaming
Protocol (RTSP)", RFC 2326, April 1998.
[15] Handley, M., Schulzrinne, H., Schooler, E. and J. Rosenberg,
"SIP: Session Initiation Protocol", RFC 2543, March 1999.
[16] Shacham, A., Monsour, R., Pereira, R. and M. Thomas, "IP
Payload Compression Protocol (IPComp)", RFC 2393, December
1998.
[17] Arkko, J., Torvinen, V., Camarillo, G., Niemi, A. and T.
Haukka, "Security Mechanism Agreement for the Session
Initiation Protocol (SIP)", RFC 3329, January 2003.
[18] Price, R., Bormann, C., Christoffersson, J., Hannu, H., Liu, Z.
and J. Rosenberg, "Signaling Compression (SigComp)", RFC 3320,
January 2003.
[19] Johnston, A., Donovan, S., Sparks, R., Cunningham, C. and K.
Summers, "Session Initiation Protocol (SIP) Basic Call Flow
Examples", BCP 75, RFC 3665, December 2003.
[20] Rosenberg, J., "A Session Initiation Protocol (SIP) Event
Package for Registrations", RFC 3680, March 2004.
[21] Rosenberg, J. and H. Schulzrinne, "Reliability of Provisional
Responses in Session Initiation Protocol (SIP)", RFC 3262, June
2002.
[22] Rosenberg, J., "The Session Initiation Protocol (SIP) UPDATE
Method", RFC 3311, October 2002.
[23] Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA
Considerations Section in RFCs", BCP 26, RFC 2434, October
1998.
[24] Reynolds, J. and R. Braden, "Instructions to Request for
Comments (RFC) Authors", draft-rfc-editor-rfc2223bis-07 (work
in progress), August 2003.
[25] Rosenberg, J. and H. Schulzrinne, "An Offer/Answer Model with
Session Description Protocol (SDP)", RFC 3264, June 2002.
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 25]
Internet-Draft SIP Guidelines July 2004
Authors' Addresses
Jonathan Rosenberg
dynamicsoft
600 Lanidex Plaza
Parsippany, NJ 07054
US
Phone: +1 973 952-5000
EMail: jdrosen@dynamicsoft.com
URI: http://www.jdrosen.net
Henning Schulzrinne
Columbia University
M/S 0401
1214 Amsterdam Ave.
New York, NY 10027
US
EMail: schulzrinne@cs.columbia.edu
URI: http://www.cs.columbia.edu/~hgs
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 26]
Internet-Draft SIP Guidelines July 2004
Intellectual Property Statement
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Disclaimer of Validity
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Copyright Statement
Copyright (C) The Internet Society (2004). This document is subject
to the rights, licenses and restrictions contained in BCP 78, and
except as set forth therein, the authors retain all their rights.
Acknowledgment
Funding for the RFC Editor function is currently provided by the
Internet Society.
Rosenberg & Schulzrinne Expires January 16, 2005 [Page 27]
| PAFTECH AB 2003-2026 | 2026-04-22 22:48:43 |