One document matched: draft-ietf-sieve-editheader-08.txt

Differences from draft-ietf-sieve-editheader-07.txt

Network Working Group                                      Jutta Degener
Internet Draft                                           Philip Guenther
Intended status: Standards Track                          Sendmail, Inc.
Expires: September 2007                                       March 2007
Updates: RFC-ietf-sieve-3028bis-12


               Sieve Email Filtering: Editheader Extension
                    draft-ietf-sieve-editheader-08.txt


Status of this memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as
   Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six
   months and may be updated, replaced, or obsoleted by other
   documents at any time.  It is inappropriate to use Internet-
   Drafts as reference material or to cite them other than as
   "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/1id-abstracts.html

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html

Copyright Notice

   Copyright (C) The IETF Trust (2007).

Abstract

   This document defines two new actions for the "Sieve" email
   filtering language that add and delete email header fields.


1. Introduction

   Email header fields are a flexible and easy to understand means
   of communication between email processors.
   This extension enables sieve scripts to interact with other
   components that consume or produce header fields by allowing
   the script to delete and add header fields.




Degener & Guenther           Standards Track                    [Page 1]

Internet-Draft  Sieve Email Filtering: Editheader Extension   March 2007


2. Conventions used.

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [KEYWORDS].

   Conventions for notations are as in [SIEVE] section 1.1, including
   use of the "Usage:" label for the definition of action and tagged
   arguments syntax.

   The term "header field" is used here as in [IMAIL] to mean a
   logical line of an email message header.

   The capability string associated with the extension defined in
   this document is "editheader".


3. Action addheader

   Usage: "addheader" [":last"] <field-name: string> <value: string>

   The addheader action adds a header field to the existing message
   header.  If the field-name is not a valid 7-bit US-ASCII header
   field name as described by the [IMAIL] "field-name" nonterminal
   syntax element, the implementation MUST flag an error.  The
   addheader action does not affect Sieve's implicit keep.

   If the specified field value does not match the RFC 2822
   "unstructured" nonterminal syntax element or exceeds a length
   limit set by the implementation, the implementation MUST either
   flag an error or encode the field using folding white space and
   the encodings described in [RFC2047] or [RFC2231] to be compliant
   with RFC 2822.

   An implementation MAY impose a length limit onto the size of
   the encoded header field; such a limit MUST NOT be less
   than 998 characters, not including the terminating CRLF
   supplied by the implementation.

   By default, the header field is inserted at the beginning of the
   existing message header.  If the optional flag ":last" is
   specified, it is appended at the end.

   Example:
        /* Don't redirect if we already redirected */
        if not header :contains "X-Sieve-Filtered"
                ["<kim@job.example.com>", "<kim@home.example.com>"]
        {
                addheader "X-Sieve-Filtered" "<kim@job.example.com>";
                redirect "kim@home.example.com";
        }


Degener & Guenther           Standards Track                    [Page 2]

Internet-Draft  Sieve Email Filtering: Editheader Extension   March 2007


4. Action deleteheader

   Usage: "deleteheader" [":index" <fieldno: number> [":last"]]
                [COMPARATOR] [MATCH-TYPE]
                <field-name: string>
                [<value-patterns: string-list>]

   By default, the deleteheader action deletes all occurrences of
   the named header field.  The deleteheader action does not affect
   Sieve's implicit keep.

   The field-name is mandatory and always matched as a case-insensitive
   US-ASCII string.  If the field-name is not a valid 7-bit header
   field name as described by the [IMAIL] "field-name" nonterminal
   syntax element, the implementation MUST flag an error.

   The value-patterns, if specified, restrict which occurrences of
   the header field are deleted to those whose values match any of
   the specified value-patterns, the matching being according to
   the match-type and comparator and performed as if by the "header"
   test.  In particular, leading and trailing whitespace in the
   field values is ignored.

   If :index <fieldno> is specified, the attempts to match a value
   are limited to the <fieldno> occurrence of the named header
   field, beginning at 1, the first named header field.  If :last
   is specified, the count is backwards; 1 denotes the last named
   header field, 2 the second to last, and so on.  The counting
   happens before the <value-patterns> match, if any.  For example:

        deleteheader :index 2 :contains "Received" "via carrier-pigeon"

   deletes the second "Received" header field if it contains
   the string "via carrier-pigeon" (not the second Received field
   that contains "via carrier-pigeon").

   It is not an error if no header fields match the conditions in
   the deleteheader action or if the :index argument is greater
   than the number of named header fields.

   If an script uses the deleteheader action to remove "Received"
   header fields and then performs a "redirect" action, the
   implementation SHOULD NOT send the outgoing message with fewer
   Received header fields than the original message.  If the
   implementation does not permit that for the involved script, it
   is implementation defined what Received header fields are present
   in such an outgoing message.  The above overrides the requirement
   on Received header fields in RFC-ietf-sieve-3028bis-12 section
   4.2.




Degener & Guenther           Standards Track                    [Page 3]

Internet-Draft  Sieve Email Filtering: Editheader Extension   March 2007


5. Interaction with Other Sieve Extensions

   Actions that generate [MDN], [DSN], or similar disposition
   messages MUST do so using the original, unmodified message header.
   Similarly, if an error terminates processing of the script, the
   original message header MUST be used when doing the implicit
   keep required by [SIEVE] section 2.10.6.

   With the exception of the special handling of "redirect" and
   "Received" header fields described above, all other actions that
   store or send the message MUST do so with the current set of
   header fields.

   Tests and actions such as "exists", "header", or "vacation"
   [VACATION] that examine header fields MUST examine the current
   state of a header as modified by any actions that have taken
   place so far.
   
   As an example, the "header" test in the following fragment will
   always evaluate to true, regardless of whether the incoming
   message contained an "X-Hello" header field or not:

        addheader "X-Hello" "World";
        if header :contains "X-Hello" "World"
        {
                fileinto "international";
        }

   However, if the presence or value of a header field affects how
   the implementation parses or decodes other parts of the message,
   then for the purposes of that parsing or decoding the implementation
   MAY ignore some or all changes made to those header fields.  For
   example, in an implementation that supports the [BODY] extension,
   "body" tests may be unaffected by deleting or adding Content-Type
   or Content-Transfer-Encoding header fields.  This does not rescind
   the requirement that changes to those header fields affect direct
   tests; only the semantic side effects of changes to the fields
   may be ignored.

   For the purpose of weeding out duplicates, a message modified
   by addheader or deleteheader MUST be considered the same as
   the original message.  For example, in an implementation that
   obeys the constraint in [SIEVE] section 2.10.3 and does not deliver
   the same message to a folder more than once, the following
   code fragment

        keep;
        addheader "X-Flavor" "vanilla";
        keep;




Degener & Guenther           Standards Track                    [Page 4]

Internet-Draft  Sieve Email Filtering: Editheader Extension   March 2007


   MUST only file one message.  It is up to the implementation
   to pick which of the redundant "fileinto" or "keep" actions is
   executed, and which ones are ignored.

   The "implicit keep" is thought to be executed at the end of
   the script, after the headers have been modified.  (However,
   a canceled "implicit keep" remains canceled.)


6.  IANA Considerations

    The following template specifies the IANA registration of the Sieve
    extension specified in this document:

    To: iana@iana.org
    Subject: Registration of new Sieve extension

    Capability name: editheader
    Description:     adds actions 'addheader' and 'deleteheader'
                     that modify the header of the message being
                     processed
    RFC number:      this RFC
    Contact Address: Jutta Degener <jutta@pobox.com>

    This information should be added to the list of sieve extensions
    given on http://www.iana.org/assignments/sieve-extensions.


7. Security Considerations

   Someone with write access to a user's script storage may use this
   extension to generate headers that a user would otherwise be
   shielded from (e.g., by a gateway MTA that removes them).

   A sieve filter that removes header fields may unwisely destroy
   evidence about the path a message has taken.

   While this specification overrides the requirement that redirected
   messages have more Received header fields than the message as
   received, doing so removes an important mechanisms for detecting
   loops and therefore should not be permitted by implementations
   without due consideration, such as requiring administrative
   action to enable it.

   Any change in a message content may interfere with digital
   signature mechanisms that include the header in the signed
   material.  Since normal message delivery adds "Received:"
   header fields to the beginning of a message, many such schemas
   are impervious to headers prefixed to a message, and will
   work with "addheader" unless :last is used.



Degener & Guenther           Standards Track                    [Page 5]

Internet-Draft  Sieve Email Filtering: Editheader Extension   March 2007


   Any decision mechanism in a user's filter that is based
   on headers is vulnerable to header spoofing.  For example,
   if the user adds an APPROVED header or tag, a malicious sender
   may add that tag or header themselves.  One way to guard against
   this is to delete or rename any such headers or stamps prior
   to processing the message.


8. Acknowledgments

   Thanks to Eric Allman, Cyrus Daboo, Matthew Elvey, Ned Freed,
   Arnt Gulbrandsen, Simon Josefsson, Will Lee, William Leibzon,
   Mark E. Mallett, Chris Markle, Alexey Melnikov, Randall Schwartz,
   Nigel Swinson, Kjetil Torgrim Homme, and Rand Wacker for extensive
   corrections and suggestions.


9. Authors' Addresses

   Jutta Degener
   5245 College Ave, Suite #127
   Oakland, CA 94618

   Email: jutta@pobox.com

   Philip Guenther
   Sendmail, Inc.
   6425 Christie Ave, 4th Floor
   Emeryville, CA 94608

   Email: guenther@sendmail.com


10. Discussion

   This section will be removed when this document leaves the
   Internet-Draft stage.

   This draft is intended as an extension to the Sieve mail filtering
   language.  Sieve extensions are discussed on the MTA Filters mailing
   list at <ietf-mta-filters@imc.org>.  Subscription requests can
   be sent to <ietf-mta-filters-request@imc.org> (send an email
   message with the word "subscribe" in the body).

   More information on the mailing list along with a WWW archive of
   back messages is available at <http://www.imc.org/ietf-mta-filters/>.







Degener & Guenther           Standards Track                    [Page 6]

Internet-Draft  Sieve Email Filtering: Editheader Extension   March 2007


10.1 Changes from draft-ietf-sieve-editheader-07.txt

   Let implementations permit redirected messages to have fewer
   Received header fields, but warn about the consequences.

   Updated boilerplate to match RFC 4748.

   Added "Intended-Status: Standards Track" and
   "Updates: draft-ietf-sieve-3028bis-12"

   Change the references from appendices to sections.
   Update [SIEVE], [BODY], [DSN], and [MDN] references.


10.2 Changes from draft-ietf-sieve-editheader-06.txt

   Make deleteheader match addheader on the description of invalid
   field-names.

   Update copyright boilerplate

   Update references


10.3 Changes from draft-ietf-sieve-editheader-05.txt

   MDN and DSN references are merely informative


10.4 Changes from draft-ietf-sieve-editheader-04.txt

   Ignore leading and trailing whitespace when matching header field
   values.

   Header modifications are ignored when continuing after an error
   or generating MDNs or DSNs

   Added references for MDN and DSN

   Update IANA registration to match 3028bis

   Added [KEYWORDS] boilerplate text

   Describe an invalid field-name to addheader as an error (might
   be detected at runtime)








Degener & Guenther           Standards Track                    [Page 7]

Internet-Draft  Sieve Email Filtering: Editheader Extension   March 2007


10.5 Changes from draft-ietf-sieve-editheader-03.txt

   Change "Syntax:" to "Usage:".

   Updated references.


10.6 Changes from draft-ietf-sieve-editheader-02.txt

   Clarify that value-patterns restrict which occurrences are deleted.

   Add informative reference to [BODY].


10.7 Changes from draft-ietf-sieve-editheader-01.txt

   Whitespace and line length tweaks noted by ID-nits.

   Clarified what is being counted by :index.

   Update the [SIEVE] reference to the I-D of the revision.


10.8 Changes from draft-ietf-sieve-editheader-00.txt

   Updated IPR boilerplate to RFC 3978/3979.

   Many corrections in response to WGLC comments.  Of particular note:
     - correct a number of spelling and grammar errors
     - document that neither addheader nor deleteheader affects the
       implicit keep
     - add normative references to RFC 2047 and RFC 2231
     - it is not an error for deleteheader to affect nothing
     - change "foo.tld" to "foo.example.com"
     - add an informative reference to [VACATION], citing it as an
       example of an action that examines header fields
     - add weasel words about changes to fields that have secondary
       effects
     - add security consideration for combination of header changes
       and "reject"


10.9 Changes from draft-degener-sieve-editheader-03.txt

   Renamed to draft-ietf-sieve-editheader-00.txt;
   tweaked the title and abstract.

   Added Philip Guenther as co-author.

   Updated IPR boilerplate.



Degener & Guenther           Standards Track                    [Page 8]

Internet-Draft  Sieve Email Filtering: Editheader Extension   March 2007


10.10 Changes from draft-degener-sieve-editheader-02.txt

   Changed the duplicate restrictions from "messages with different
   headers MUST be considered different" to their direct opposite,
   "messages with different headers MUST be considered the same,"
   as requested by workgroup members on the mailing list.

   Expanded mention of header signature schemes to Security
   Considerations. 

   Added IANA Considerations section.


11.  Normative References

   [IMAIL]    Resnick, P., "Internet Message Format", RFC 2822, April
              2001.

   [KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", RFC 2119, March 1997.

   [RFC2047]  Moore, K., "MIME (Multipurpose Internet Mail
              Extensions) Part Three: Message Header Extensions for
              Non-ASCII Text", RFC 2047, November 1996.

   [RFC2231]  Freed, N. and K. Moore, "MIME Parameter Value and
              Encoded Word Extensions: Character Sets, Languages, and
              Continuations", RFC 2231, November 1997.

   [SIEVE]    Guenther, P. and T. Showalter, "Sieve: A Mail Filtering
              Language", draft-ietf-sieve-3028bis-12, February 2007.


12.  Informative References

   [BODY]     Degener, J. and P. Guenther, "Sieve Email Filtering:
              Body Extension", draft-ietf-sieve-body-06, February 2007.

   [DSN]      Moore, K. and G. Vaudreuil, "An Extensible Message Format
              for Delivery Status Notifications", RFC 3464, January
              2003.

   [MDN]      T. Hansen, Ed., G. Vaudreuil, Ed., "Message Disposition
              Notification", RFC 3798, May 2004.

   [VACATION] Showalter, T. and N. Freed, "Sieve Email Filtering:
              Vacation Extension", draft-ietf-sieve-vacation-06,
              February 2006.





Degener & Guenther           Standards Track                    [Page 9]

Internet-Draft  Sieve Email Filtering: Editheader Extension   March 2007


Full Copyright Statement

   Copyright (C) The IETF Trust (2007).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the IETF
   Administrative Support Activity (IASA).









Degener & Guenther           Standards Track                   [Page 10]