One document matched: draft-ietf-ospf-ospfv3-mib-05.txt
Differences from draft-ietf-ospf-ospfv3-mib-04.txt
Network Working Group Dan Joyal
Internet Draft Lucent
Sebastian Zwolinski
Jacek Kwiatkowski
Intel
Document: draft-ietf-ospf-ospfv3-mib-05.txt April 2002
Expires: October 2002
Management Information Base for OSPFv3
Status of this Memo
This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six
months and may be updated, replaced, or obsoleted by other
documents at any time. It is inappropriate to use Internet-
Drafts as reference material or to cite them other than as "work
in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
Copyright Notice
Copyright (C) The Internet Society (2001). All Rights Reserved.
1. Abstract
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in IPv6-based internets. In
particular, it defines objects for managing the Open Shortest Path
First Routing Protocol for IPv6.
Please send comments to ospf@discuss.microsoft.com.
2. The SNMP Management Framework
Internet Draft Expires October 2002 1
OSPFv3 MIB April 2002
The SNMP Management Framework presently consists of five major
components:
o An overall architecture, described in RFC 2571 [1].
o Mechanisms for describing and naming objects and events
for the purpose of management. The first version of this
Structure of Management Information (SMI) is called SMIv1
and described in STD 16, RFC 1155 [2], STD 16, RFC 1212
[3] and RFC 1215 [4]. The second version, called SMIv2,
is described in STD 58, RFC 2578 [5], RFC 2579 [6] and
RFC 2580 [7].
o Message protocols for transferring management
information. The first version of the SNMP message
protocol is called SNMPv1 and described in STD 15, RFC
1157 [8]. A second version of the SNMP message protocol,
which is not an Internet standards track protocol, is
called SNMPv2c and described in RFC 1901 [9] and RFC 1906
[10]. The third version of the message protocol is called
SNMPv3 and described in RFC 1906 [10], RFC 2572 [11] and
RFC 2574 [12].
o Protocol operations for accessing management information.
The first set of protocol operations and associated PDU
formats is described in STD 15, RFC 1157 [8]. A second
set of protocol operations and associated PDU formats is
described in RFC 1905 [13].
o A set of fundamental applications described in RFC 2573
[14] and the view-based access control mechanism
described in RFC 2575 [15].
A more detailed introduction to the current SNMP Management
Framework can be found in RFC 2570 [16].
Managed objects are accessed via a virtual information store,
termed the Management Information Base or MIB. Objects in the
MIB are defined using the mechanisms defined in the SMI.
This memo specifies a MIB module that is compliant to the
SMIv2. A MIB conforming to the SMIv1 can be produced through
the appropriate translations. The resulting translated MIB
must be semantically equivalent, except where objects or
events are omitted because no translation is possible (use of
Counter64). Some machine readable information in SMIv2 will be
converted into textual descriptions in SMIv1 during the
translation process. However, this loss of machine readable
information is not considered to change the semantics of the
MIB.
Internet Draft Expires October 2002 2
OSPFv3 MIB April 2002
3. Overview
This memo defines a portion of the Management Information Base (MIB)
for managing the Open Shortest Path First Routing Protocol for IPv6,
otherwise known as OSPF version 3 (OSPFv3). Though the fundamental
mechanisms of OSPF version 2 (OSPFv2) remain unchanged in OSPFv3,
some changes were necessary due to differences in IP address size and
in protocol semantics between IPv4 and IPv6. In many cases, where the
protocol operations have not changed from OSPFv2, the specification
for OSPFv3 does not restate the details, but instead refers to the
relevant sections in the OSPFv2 specification. This MIB follows along
the same lines and includes Reference clauses referring to the OSPFv2
specification when applicable.
An attempt was made to align the OSPFv3 MIB as closely as possible
with the OSPFv2 MIB. The following subsections highlight the major
differences between the OSPFv2 MIB and the OSPFv3 MIB. A detailed
list of differences can be found in Appendix A.
3.1. IPv6 Interfaces
IPv6 interfaces attach to links [17]. A link is roughly defined as
the layer below IPv6 (e.g. Ethernet, IPv4 Tunnel). One or more IPv6
prefixes can be associated with an IPv6 interface. IPv6 interfaces
and the prefixes associated with those interfaces can be configured
via the IPV6-MIB [20]. IPv6 interfaces are configured in the IPv6
Interface Table and IPv6 prefixes are configured in the IPv6 Address
Prefix Table. An IPv6 interface is identified by a unique index
value. IPv6 Address Prefix Table entries associated with an IPv6
interface reference the interface's index.
Whereas an interface identifier in OSPFv2 is a local IPv4 address or
MIB-2 interface index, an OSPFv3 interface identifier is an IPv6
interface index. For example, the index value of an OSPFv3 Interface
Table entry is the IPv6 interface index of the IPv6 interface over
which OSPFv3 is configured to operate.
3.2. Addressing Semantics
Router ID, Area ID and Link State ID remain at the OSPFv2 size of 32
bits, therefore, they cannot be assigned IPv6 addresses. A router
running both IPv4 and IPv6 concurrently can continue to use a local
IPv4 interface address as the OSPFv3 router ID. Otherwise, the router
ID must be selected using another method (e.g. administratively
assigned). The Link State ID has no addressing semantics in OSPFv3.
The syntax of Router ID, Area ID and Link State ID remains the same
as in the OSPFv2 MIB(i.e. ipAddress). The order of the Router ID and
Link State ID index components in Link State Database Tables are
reversed in OSPFv3 since the lack of addressing semantics in Link
State IDs make them less unique identifiers than the Router ID. It is
Internet Draft Expires October 2002 3
OSPFv3 MIB April 2002
more useful to do partial OID lookups extending to the Router ID
rather than the LSID.
3.3. Authentication
In OSPFv3, authentication has been removed from the protocol itself.
MIB objects related to authentication are not carried forward from
the OSPFv2 MIB.
3.4. Type of Service
OSPFv2 MIB objects related to Type of Service (ToS) are not carried
forward to the OSPFv3 MIB.
3.5. Flooding Scope
Flooding scope for LSAs has been generalized and is now explicitly
encoded in the LSA's LS type field. The action to take upon receipt
of unknown LSA types is also encoded in the LS type field [19]. The
OSPFv3 MIB defines three Link State Database tables, one each for
Area-scope LSAs, Link-scope LSAs and AS-scope LSAs.
3.6. Virtual Links
Since addressing semantics have been removed from router-LSAs in
OSPFv3, Virtual Links now need to be assigned an interface ID for
advertisement in Hello packets and in router-LSAs. An object has
been added to the Virtual Interface Table entry for this purpose.
3.7. Neighbors
The OSPFv2 Neighbor Table has been split into two tables. The OSPFv3
Neighbor Table is a read-only table and it contains information
learned from Hellos received from neighbors, including NBMA
neighbors. The OSPFv3 NBMA Neighbor Table contains entries for
manually configured neighbors and neighbors dynamically discovered by
lower-level protocols such as Inverse Neighbor Discovery.
4. Structure of the OSPFv3 MIB
The MIB is composed of the following sections:
General Variables
Area Table
Area-Scope Link State Database
Link-Scope Link State Database
AS-Scope Link State Database
Host Table
Interface Table
Virtual Interface Table
Neighbor Table
NBMA Neighbor Table
Internet Draft Expires October 2002 4
OSPFv3 MIB April 2002
Virtual Neighbor Table
Aggregate Range Table
4.1. General Variables
The General Variables are global to the OSPFv3 Process.
4.2. Area Table
The Area Data Structure describes the OSPFv3 Areas that the
router participates in.
4.3. Area-Scope, Link-Scope and AS-Scope Link State Database
The Link State Databases are provided primarily to provide
detailed information for network debugging.
4.4. Host Table
The Host Table is provided to view configured Host Route
information.
4.5. Interface Table
The Interface Table describes the various IPv6 links on which
OSPFv3 is configured.
4.6. Virtual Interface Table
The Virtual Interface Table describes virtual OSPFv3 links.
4.7. Neighbor, NBMA Neighbor and Virtual Neighbor Tables
The Neighbor Table, the NBMA Neighbor Table and the Virtual Neighbor
Table describe the neighbors to the OSPFv3 Process.
4.8. Aggregate Range Table
The Aggregate Range Table describes prefixes which summarize
routing information for export outside of an Area.
5. Definitions
OSPFV3-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, mib-2,
Counter32, Gauge32, Integer32, IpAddress,
Unsigned32
FROM SNMPv2-SMI
TruthValue, StorageType, RowStatus
Internet Draft Expires October 2002 5
OSPFv3 MIB April 2002
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
InterfaceIndex
FROM IF-MIB
InetAddressType, InetAddress, InetAddressPrefixLength
FROM INET-ADDRESS-MIB
AreaID, RouterID, Metric, BigMetric, Status,
HelloRange, UpToMaxAge, DesignatedRouterPriority
FROM OSPF-MIB;
ospfv3MIB MODULE-IDENTITY
LAST-UPDATED "200204021200Z"
ORGANIZATION "IETF OSPF Working Group"
CONTACT-INFO
"WG E-Mail: ospf@discuss.microsoft.com
WG Chair : John.Moy@sycamorenet.com
Dan Joyal
Lucent Technologies
One Robbins Road
Westford, MA 01886, USA
joyal@lucent.com
Jacek Kwiatkowski
Intel Technology Poland
ul. Slowackiego 173
80-298 Gdansk, Poland
jacek.kwiatkowski@intel.com
Sebastian Zwolinski
Intel Technology Poland
ul. Slowackiego 173
80-298 Gdansk, Poland
sebastian.zwolinski@intel.com"
DESCRIPTION
"The MIB module to describe OSPF version 3"
REVISION "200204021200Z"
DESCRIPTION -- RFC Editor assigns RFC xxxx
"Initial version, published as RFC xxxx"
::= { mib-2 xx } -- IANA assigns xx
-- Top-level structure of MIB
ospfv3Objects OBJECT IDENTIFIER ::= { ospfv3MIB 1 }
ospfv3Conformance OBJECT IDENTIFIER ::= { ospfv3MIB 2 }
-- OSPFv3 General Variables
-- These parameters apply globally to the Router's
-- OSPFv3 Process.
Internet Draft Expires October 2002 6
OSPFv3 MIB April 2002
ospfv3GeneralGroup OBJECT IDENTIFIER ::= { ospfv3Objects 1 }
ospfv3RouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the
router in the Autonomous System.
To ensure uniqueness, this may
default to the value of one of the
router's IPv4 interface addresses if IPv4 is
configured on the router."
::= { ospfv3GeneralGroup 1 }
ospfv3AdminStat OBJECT-TYPE
SYNTAX Status
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of OSPFv3 in the
router. The value 'enabled' denotes that the
OSPFv3 Process is active on at least one inter-
face; 'disabled' disables it on all inter-
faces."
::= { ospfv3GeneralGroup 2 }
ospfv3VersionNumber OBJECT-TYPE
SYNTAX INTEGER { version3(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version number of OSPF for IPv6 is 3."
::= { ospfv3GeneralGroup 3 }
ospfv3AreaBdrRtrStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A flag to note whether this router is an area
border router."
REFERENCE
"OSPF Version 2, Section 3 Splitting the AS into
Areas"
::= { ospfv3GeneralGroup 4 }
ospfv3ASBdrRtrStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Internet Draft Expires October 2002 7
OSPFv3 MIB April 2002
"A flag to note whether this router is config-
ured as an Autonomous System border router."
REFERENCE
"OSPF Version 2, Section 3.3 Classification of
routers"
::= { ospfv3GeneralGroup 5 }
ospfv3AsScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AS-Scope (e.g. AS-External) link-state
advertisements in the link-state database."
::= { ospfv3GeneralGroup 6 }
ospfv3AsScopeLsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the LS checksums of
the AS-scoped link-state advertisements con-
tained in the link-state database. This sum
can be used to determine if there has been a
change in a router's link state database, and
to compare the link-state database of two
routers."
::= { ospfv3GeneralGroup 7 }
ospfv3OriginateNewLsas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of new link-state advertisements
that have been originated. This number is in-
cremented each time the router originates a new
LSA."
::= { ospfv3GeneralGroup 8 }
ospfv3RxNewLsas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of link-state advertisements re-
ceived determined to be new instantiations.
This number does not include newer instantia-
tions of self-originated link-state advertise-
ments."
::= { ospfv3GeneralGroup 9 }
Internet Draft Expires October 2002 8
OSPFv3 MIB April 2002
ospfv3ExtAreaLsdbLimit OBJECT-TYPE
SYNTAX Integer32 (-1..'7FFFFFFF'h)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of non-default AS-
external-LSAs entries that can be stored in the
link-state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs
in a router's link-state database reaches
ospfv3ExtAreaLsdbLimit, the router enters Overflow-
State. The router never holds more than
ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs
in its database. OspfExtAreaLsdbLimit MUST be set
identically in all routers attached to the OSPFv3
backbone and/or any regular OSPFv3 area. (i.e.,
OSPFv3 stub areas and NSSAs are excluded)."
::= { ospfv3GeneralGroup 10 }
ospfv3MulticastExtensions OBJECT-TYPE
SYNTAX BITS {
intraAreaMulticast(0),
interAreaMulticast(1),
interAsMulticast(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Bit Mask indicating whether the router is
forwarding IPv6 multicast datagrams
based on the algorithms defined in the Multi-
cast Extensions to OSPF.
If intraAreaMulticast set, indicates that the router
can forward IPv6 multicast datagrams in the router's
directly attached areas (called intra-area mul-
ticast routing).
If interAreaMulticast set, indicates that the router
can forward IPv6 multicast datagrams between OSPFv3
areas (called inter-area multicast routing).
If interAsMulticast set, indicates that the router can
forward IPv6 multicast datagrams between Auto-
nomous Systems (called inter-AS multicast rout-
ing).
Only certain combinations of bit settings are
allowed, namely:
- All bits cleared (no multicasting)
Internet Draft Expires October 2002 9
OSPFv3 MIB April 2002
- intraAreaMulticast only,
- intraAreaMulticast and interAreaMulticast,
- intraAreaMulticast and interAsMulticast
- intraAreaMulticast, interAreaMulticast and
interAsMulticast
By default, all bits are cleared."
::= { ospfv3GeneralGroup 11 }
ospfv3ExitOverflowInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds that, after entering
OverflowState, a router will attempt to leave
OverflowState. This allows the router to again
originate non-default AS-External-LSAs. When
set to 0, the router will not leave Overflow-
State until restarted."
::= { ospfv3GeneralGroup 12 }
ospfv3DemandExtensions OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router's support for demand routing."
REFERENCE
"OSPF Version 2, Appendix on Demand Routing"
::= { ospfv3GeneralGroup 13 }
ospfv3TrafficEngineeringSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The router's support for traffic engineering
extensions."
::= { ospfv3GeneralGroup 14 }
-- The OSPFv3 Area Data Structure contains information
-- regarding the various areas. The interfaces and
-- virtual links are configured as part of these areas.
-- Area 0.0.0.0, by definition, is the Backbone Area
ospfv3AreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configured parame-
ters and cumulative statistics of the router's
Internet Draft Expires October 2002 10
OSPFv3 MIB April 2002
attached areas."
REFERENCE
"OSPF Version 2, Section 6 The Area Data Struc-
ture"
::= { ospfv3Objects 2 }
ospfv3AreaEntry OBJECT-TYPE
SYNTAX Ospfv3AreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas."
INDEX { ospfv3AreaId }
::= { ospfv3AreaTable 1 }
Ospfv3AreaEntry ::= SEQUENCE {
ospfv3AreaId
AreaID,
ospfv3ImportAsExtern
INTEGER,
ospfv3SpfRuns
Counter32,
ospfv3AreaBdrRtrCount
Gauge32,
ospfv3AsBdrRtrCount
Gauge32,
ospfv3AreaScopeLsaCount
Gauge32,
ospfv3AreaScopeLsaCksumSum
Integer32,
ospfv3AreaSummary
INTEGER,
ospfv3AreaStatus
RowStatus,
ospfv3StubMetric
BigMetric,
ospfv3AreaNssaTranslatorRole
INTEGER,
ospfv3AreaNssaTranslatorState
INTEGER,
ospfv3AreaNssaTranslatorStabilityInterval
Unsigned32,
ospfv3AreaNssaTranslatorEvents
Counter32
}
ospfv3AreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Internet Draft Expires October 2002 11
OSPFv3 MIB April 2002
"A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPFv3 backbone."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3AreaEntry 1 }
ospfv3ImportAsExtern OBJECT-TYPE
SYNTAX INTEGER {
importExternal(1), -- normal area
importNoExternal(2), -- stub area
importNssa(3) -- not-so-stubby-area
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether an area is a Stub area, NSSA, or
standard area. AS-scope LSAs are not imported into Stub
Areas or NSSAs. NSSAs import AS-External data as Type-7
LSAs which have Area-scope"
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
DEFVAL { importExternal }
::= { ospfv3AreaEntry 2 }
ospfv3SpfRuns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the intra-area route
table has been calculated using this area's
link-state database. This is typically done
using Dijkstra's algorithm."
::= { ospfv3AreaEntry 3 }
ospfv3AreaBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of area border routers reach-
able within this area. This is initially zero,
and is calculated in each SPF Pass."
::= { ospfv3AreaEntry 4 }
ospfv3AsBdrRtrCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Autonomous System border
routers reachable within this area. This is
initially zero, and is calculated in each SPF
Internet Draft Expires October 2002 12
OSPFv3 MIB April 2002
Pass."
::= { ospfv3AreaEntry 5 }
ospfv3AreaScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Area-Scope link-state
advertisements in this area's link-state
database."
::= { ospfv3AreaEntry 6 }
ospfv3AreaScopeLsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the Area-Scope link-state
advertisements' LS checksums contained in this
area's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers."
::= { ospfv3AreaEntry 7 }
ospfv3AreaSummary OBJECT-TYPE
SYNTAX INTEGER {
noAreaSummary(1),
sendAreaSummary(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The variable ospfv3AreaSummary controls the im-
port of Inter-Area LSAs into stub areas. It has
no effect on other areas.
If it is noAreaSummary, the router will neither
originate nor propagate Inter-Area LSAs into the
stub area. It will rely entirely on its de-
fault route.
If it is sendAreaSummary, the router will both
summarize and propagate Inter-Area LSAs."
DEFVAL { noAreaSummary }
::= { ospfv3AreaEntry 8 }
ospfv3AreaStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
Internet Draft Expires October 2002 13
OSPFv3 MIB April 2002
"This variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6]."
::= { ospfv3AreaEntry 9 }
ospfv3StubMetric OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric value advertised for the default route
into Stub and NSSA areas."
::= { ospfv3AreaEntry 10 }
ospfv3AreaNssaTranslatorRole OBJECT-TYPE
SYNTAX INTEGER { always(1), candidate(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates an NSSA Border router's ability to
perform NSSA translation of type-7 LSAs into
type-5 LSAs."
DEFVAL { candidate }
::= { ospfv3AreaEntry 11 }
ospfv3AreaNssaTranslatorState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
elected(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if and how an NSSA Border router is
performing NSSA translation of type-7 LSAs into type-5
LSAs. When this object is set to enabled, the NSSA
Border router's ospfv3AreaNssTranslatorRole
has been set to always. When this object is set to
elected, a candidate NSSA Border router is translating
type-7 LSAs into type-5. When this object is set to
disabled, a candidate NSSA Border router is NOT
translating type-7 LSAs into type-5."
::= { ospfv3AreaEntry 12 }
ospfv3AreaNssaTranslatorStabilityInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds after an elected translator
determines its services are no longer required, that
Internet Draft Expires October 2002 14
OSPFv3 MIB April 2002
it should continue to perform its translation duties."
DEFVAL { 40 }
::= { ospfv3AreaEntry 13 }
ospfv3AreaNssaTranslatorEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of Translator State changes
that have occurred since the last boot-up."
::= { ospfv3AreaEntry 14 }
-- OSPFv3 AS-Scope Link State Database
-- The Link State Database contains the AS-Scope Link State
-- Advertisements from throughout the areas that the
-- device is attached to.
ospfv3AsLsdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AsLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Process's AS-Scope Link State Database."
::= { ospfv3Objects 3 }
ospfv3AsLsdbEntry OBJECT-TYPE
SYNTAX Ospfv3AsLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single AS-Scope Link State Advertisement."
INDEX { ospfv3AsLsdbType,
ospfv3AsLsdbRouterId,
ospfv3AsLsdbLsid }
::= { ospfv3AsLsdbTable 1 }
Ospfv3AsLsdbEntry ::= SEQUENCE {
ospfv3AsLsdbType
INTEGER,
ospfv3AsLsdbRouterId
RouterID,
ospfv3AsLsdbLsid
IpAddress,
ospfv3AsLsdbSequence
Integer32,
ospfv3AsLsdbAge
Integer32,
ospfv3AsLsdbChecksum
Integer32,
ospfv3AsLsdbAdvertisement
OCTET STRING
Internet Draft Expires October 2002 15
OSPFv3 MIB April 2002
}
ospfv3AsLsdbType OBJECT-TYPE
SYNTAX INTEGER {
asExternalLink(16389) -- 0x4005
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate advertise-
ment format. AS-Scope LSAs with the U-bit set
are also store in this database."
::= { ospfv3AsLsdbEntry 1 }
ospfv3AsLsdbRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { ospfv3AsLsdbEntry 2 }
ospfv3AsLsdbLsid OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics."
::= { ospfv3AsLsdbEntry 3 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
ospfv3AsLsdbSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
Internet Draft Expires October 2002 16
OSPFv3 MIB April 2002
larger the sequence number the more recent the
advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { ospfv3AsLsdbEntry 4 }
ospfv3AsLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
-- unless DoNotAge bit is set
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state adver-
tisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { ospfv3AsLsdbEntry 5 }
ospfv3AsLsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { ospfv3AsLsdbEntry 6 }
ospfv3AsLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header."
::= { ospfv3AsLsdbEntry 7 }
-- OSPFv3 Area-Scope Link State Database
-- The Link State Database contains the Area-Scope Link State
-- Advertisements from throughout the area that the
-- device is attached to.
ospfv3AreaLsdbTable OBJECT-TYPE
Internet Draft Expires October 2002 17
OSPFv3 MIB April 2002
SYNTAX SEQUENCE OF Ospfv3AreaLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Process's Area-Scope Link State Database."
::= { ospfv3Objects 4 }
ospfv3AreaLsdbEntry OBJECT-TYPE
SYNTAX Ospfv3AreaLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Area-Scope Link State Advertisement."
INDEX { ospfv3AreaLsdbAreaId,
ospfv3AreaLsdbType,
ospfv3AreaLsdbRouterId,
ospfv3AreaLsdbLsid }
::= { ospfv3AreaLsdbTable 1 }
Ospfv3AreaLsdbEntry ::= SEQUENCE {
ospfv3AreaLsdbAreaId
AreaID,
ospfv3AreaLsdbType
INTEGER,
ospfv3AreaLsdbRouterId
RouterID,
ospfv3AreaLsdbLsid
IpAddress,
ospfv3AreaLsdbSequence
Integer32,
ospfv3AreaLsdbAge
Integer32,
ospfv3AreaLsdbChecksum
Integer32,
ospfv3AreaLsdbAdvertisement
OCTET STRING
}
ospfv3AreaLsdbAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32 bit identifier of the Area from which the
LSA was received."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3AreaLsdbEntry 1 }
ospfv3AreaLsdbType OBJECT-TYPE
SYNTAX INTEGER {
routerLsa(8193), -- 0x2001
networkLsa(8194), -- 0x2002
Internet Draft Expires October 2002 18
OSPFv3 MIB April 2002
interAreaPrefixLsa(8195), -- 0x2003
interAreaRouterLsa(8196), -- 0x2004
groupMembershipLsa(8198), -- 0x2006
nssaExternalLsa(8199), -- 0x2007
intraAreaPrefixLsa(8201) -- 0x2009
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate advertise-
ment format. Area-Scope LSAs with the U-bit set
are also stored in this database."
::= { ospfv3AreaLsdbEntry 2 }
ospfv3AreaLsdbRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { ospfv3AreaLsdbEntry 3 }
ospfv3AreaLsdbLsid OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics."
::= { ospfv3AreaLsdbEntry 4 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
ospfv3AreaLsdbSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
Internet Draft Expires October 2002 19
OSPFv3 MIB April 2002
larger the sequence number the more recent the
advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { ospfv3AreaLsdbEntry 5 }
ospfv3AreaLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
-- unless DoNotAge bit is set
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state adver-
tisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { ospfv3AreaLsdbEntry 6 }
ospfv3AreaLsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { ospfv3AreaLsdbEntry 7 }
ospfv3AreaLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header."
::= { ospfv3AreaLsdbEntry 8 }
-- OSPFv3 Link-Scope Link State Database
-- The Link State Database contains the Link-Scope Link State
-- Advertisements from the links that the
-- device is attached to.
ospfv3LinkLsdbTable OBJECT-TYPE
Internet Draft Expires October 2002 20
OSPFv3 MIB April 2002
SYNTAX SEQUENCE OF Ospfv3LinkLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Process's Link-Scope Link State Database."
::= { ospfv3Objects 5 }
ospfv3LinkLsdbEntry OBJECT-TYPE
SYNTAX Ospfv3LinkLsdbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single Link-Scope Link State Advertisement."
INDEX { ospfv3LinkLsdbIfIndex,
ospfv3LinkLsdbType,
ospfv3LinkLsdbRouterId,
ospfv3LinkLsdbLsid }
::= { ospfv3LinkLsdbTable 1 }
Ospfv3LinkLsdbEntry ::= SEQUENCE {
ospfv3LinkLsdbIfIndex
InterfaceIndex,
ospfv3LinkLsdbType
INTEGER,
ospfv3LinkLsdbRouterId
RouterID,
ospfv3LinkLsdbLsid
IpAddress,
ospfv3LinkLsdbSequence
Integer32,
ospfv3LinkLsdbAge
Integer32,
ospfv3LinkLsdbChecksum
Integer32,
ospfv3LinkLsdbAdvertisement
OCTET STRING
}
ospfv3LinkLsdbIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The identifier of the link from which the LSA
was received."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3LinkLsdbEntry 1 }
ospfv3LinkLsdbType OBJECT-TYPE
SYNTAX INTEGER {
linkLsa(8) -- 0x0008
}
Internet Draft Expires October 2002 21
OSPFv3 MIB April 2002
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the link state advertisement.
Each link state type has a separate advertise-
ment format. Link-Scope LSAs with the U-bit set
are also stored in this database."
::= { ospfv3LinkLsdbEntry 2 }
ospfv3LinkLsdbRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32 bit number that uniquely identifies the
originating router in the Autonomous System."
REFERENCE
"OSPF Version 2, Appendix C.1 Global parameters"
::= { ospfv3LinkLsdbEntry 3 }
ospfv3LinkLsdbLsid OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics."
::= { ospfv3LinkLsdbEntry 4 }
-- Note that the OSPF Sequence Number is a 32 bit signed
-- integer. It starts with the value '80000001'h,
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
-- Thus, a typical sequence number will be very negative.
ospfv3LinkLsdbSequence OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement."
REFERENCE
"OSPF Version 2, Section 12.1.6 LS sequence
number"
::= { ospfv3LinkLsdbEntry 5 }
Internet Draft Expires October 2002 22
OSPFv3 MIB April 2002
ospfv3LinkLsdbAge OBJECT-TYPE
SYNTAX Integer32 -- Should be 0..MaxAge
-- unless DoNotAge bit is set
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the age of the link state adver-
tisement in seconds."
REFERENCE
"OSPF Version 2, Section 12.1.1 LS age"
::= { ospfv3LinkLsdbEntry 6 }
ospfv3LinkLsdbChecksum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum."
REFERENCE
"OSPF Version 2, Section 12.1.7 LS checksum"
::= { ospfv3LinkLsdbEntry 7 }
ospfv3LinkLsdbAdvertisement OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entire Link State Advertisement, including
its header."
::= { ospfv3LinkLsdbEntry 8 }
-- OSPF Host Table
-- The Host/Metric Table indicates what hosts are directly
-- attached to the Router, and what metrics and types of
-- service should be advertised for them.
ospfv3HostTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3HostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of Hosts, and their metrics, that the
router will advertise as host routes."
Internet Draft Expires October 2002 23
OSPFv3 MIB April 2002
REFERENCE
"OSPF Version 2, Appendix C.6 Host route param-
eters"
::= { ospfv3Objects 6 }
ospfv3HostEntry OBJECT-TYPE
SYNTAX Ospfv3HostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A metric to be advertised when a given host is
reachable."
INDEX { ospfv3HostAddressType,
ospfv3HostAddress }
::= { ospfv3HostTable 1 }
Ospfv3HostEntry ::= SEQUENCE {
ospfv3HostAddressType
InetAddressType,
ospfv3HostAddress
InetAddress,
ospfv3HostMetric
Metric,
ospfv3HostStatus
RowStatus,
ospfv3HostAreaID
AreaID
}
ospfv3HostAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of ospfv3HostAddress. Only IPv6
addresses without zone index are expected."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route parame-
ters"
::= { ospfv3HostEntry 1 }
ospfv3HostAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 Address of the Host. Must be a Global
or Site-local address."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route parame-
ters"
::= { ospfv3HostEntry 2 }
Internet Draft Expires October 2002 24
OSPFv3 MIB April 2002
ospfv3HostMetric OBJECT-TYPE
SYNTAX Metric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Metric to be advertised."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route parame-
ters"
::= { ospfv3HostEntry 3 }
ospfv3HostStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6]."
::= { ospfv3HostEntry 4 }
ospfv3HostAreaID OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Area the Host Entry is to be found within.
By default, the area that a subsuming OSPFv3 in-
terface is in, or 0.0.0.0"
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3HostEntry 5 }
-- OSPFv3 Interface Table
ospfv3IfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The OSPFv3 Interface Table describes the inter-
faces from the viewpoint of OSPFv3."
REFERENCE
"OSPF Version 2, Appendix C.3 Router interface
parameters"
::= { ospfv3Objects 7 }
ospfv3IfEntry OBJECT-TYPE
SYNTAX Ospfv3IfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Internet Draft Expires October 2002 25
OSPFv3 MIB April 2002
"The OSPFv3 Interface Entry describes one inter-
face from the viewpoint of OSPFv3."
INDEX { ospfv3IfIndex }
::= { ospfv3IfTable 1 }
Ospfv3IfEntry ::= SEQUENCE {
ospfv3IfIndex
InterfaceIndex,
ospfv3IfAreaId
AreaID,
ospfv3IfType
INTEGER,
ospfv3IfAdminStat
Status,
ospfv3IfRtrPriority
DesignatedRouterPriority,
ospfv3IfTransitDelay
UpToMaxAge,
ospfv3IfRetransInterval
UpToMaxAge,
ospfv3IfHelloInterval
HelloRange,
ospfv3IfRtrDeadInterval
Unsigned32,
ospfv3IfPollInterval
Unsigned32,
ospfv3IfState
INTEGER,
ospfv3IfDesignatedRouter
RouterID,
ospfv3IfBackupDesignatedRouter
RouterID,
ospfv3IfEvents
Counter32,
ospfv3IfStatus
RowStatus,
ospfv3IfMulticastForwarding
INTEGER,
ospfv3IfDemand
TruthValue,
ospfv3IfMetricValue
Metric,
ospfv3IfLinkScopeLsaCount
Gauge32,
ospfv3IfLinkLsaCksumSum
Integer32,
ospfv3IfInstId
Integer32
}
ospfv3IfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
Internet Draft Expires October 2002 26
OSPFv3 MIB April 2002
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured."
::= { ospfv3IfEntry 1 }
ospfv3IfAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPFv3 backbone."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { ospfv3IfEntry 2 }
ospfv3IfType OBJECT-TYPE
SYNTAX INTEGER {
broadcast(1),
nbma(2),
pointToPoint(3),
pointToMultipoint(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The OSPFv3 interface type."
::= { ospfv3IfEntry 3 }
ospfv3IfAdminStat OBJECT-TYPE
SYNTAX Status
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The OSPFv3 interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'disabled' denotes
that the interface is external to OSPFv3."
DEFVAL { enabled }
::= { ospfv3IfEntry 4 }
ospfv3IfRtrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
Internet Draft Expires October 2002 27
OSPFv3 MIB April 2002
value 0 signifies that the router is not eligi-
ble to become the designated router on this
particular network. In the event of a tie in
this value, routers will use their Router ID as
a tie breaker."
DEFVAL { 1 }
::= { ospfv3IfEntry 5 }
ospfv3IfTransitDelay OBJECT-TYPE
SYNTAX UpToMaxAge
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The estimated number of seconds it takes to
transmit a link state update packet over this
interface."
DEFVAL { 1 }
::= { ospfv3IfEntry 6 }
ospfv3IfRetransInterval OBJECT-TYPE
SYNTAX UpToMaxAge
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets."
DEFVAL { 5 }
::= { ospfv3IfEntry 7 }
ospfv3IfHelloInterval OBJECT-TYPE
SYNTAX HelloRange
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for all
routers attached to a common network."
DEFVAL { 10 }
::= { ospfv3IfEntry 8 }
ospfv3IfRtrDeadInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
Internet Draft Expires October 2002 28
OSPFv3 MIB April 2002
"The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for all routers attached
to a common network."
DEFVAL { 40 }
::= { ospfv3IfEntry 9 }
ospfv3IfPollInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor."
DEFVAL { 120 }
::= { ospfv3IfEntry 10 }
ospfv3IfState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
loopback(2),
waiting(3),
pointToPoint(4),
designatedRouter(5),
backupDesignatedRouter(6),
otherDesignatedRouter(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OSPFv3 Interface State."
::= { ospfv3IfEntry 11 }
ospfv3IfDesignatedRouter OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Router ID of the Designated Router."
::= { ospfv3IfEntry 12 }
ospfv3IfBackupDesignatedRouter OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Router ID of the Backup Designated
Router."
::= { ospfv3IfEntry 14 }
Internet Draft Expires October 2002 29
OSPFv3 MIB April 2002
ospfv3IfEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this OSPF interface has
changed its state, or an error has occurred."
::= { ospfv3IfEntry 15 }
ospfv3IfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the en-
try. The use of RowStatus is covered in more detail in
[6]."
::= { ospfv3IfEntry 17 }
ospfv3IfMulticastForwarding OBJECT-TYPE
SYNTAX INTEGER {
blocked(1), -- no multicast forwarding
multicast(2), -- using multicast address
unicast(3) -- to each OSPFv3 neighbor
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is not meaning-
ful on point to point and NBMA interfaces, and
setting ospfv3MulticastForwarding to 0 effective-
ly disables all multicast forwarding."
DEFVAL { blocked }
::= { ospfv3IfEntry 18 }
ospfv3IfDemand OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether Demand OSPFv3 procedures (hel-
lo suppression to FULL neighbors and setting the
DoNotAge flag on propagated LSAs) should be per-
formed on this interface."
DEFVAL { false }
::= { ospfv3IfEntry 19 }
ospfv3IfMetricValue OBJECT-TYPE
SYNTAX Metric
Internet Draft Expires October 2002 30
OSPFv3 MIB April 2002
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric assigned to this interface.
The default value of the Metric is
10^8 / ifSpeed."
::= { ospfv3IfEntry 20 }
ospfv3IfLinkScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link-Scope link-state
advertisements in this link's link-state database."
::= { ospfv3IfEntry 21 }
ospfv3IfLinkLsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
link's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers."
::= { ospfv3IfEntry 22 }
ospfv3IfInstId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enables multiple instances of OSPFv3 to be run over
a single link. Each protocol instance would be assigned
a separate ID. This ID has local link significance
only."
DEFVAL { 0 }
::= { ospfv3IfEntry 23 }
-- OSPFv3 Virtual Interface Table
-- The Virtual Interface Table describes the virtual
-- links that the OSPFv3 Process is configured to
-- carry on.
ospfv3VirtIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3VirtIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Internet Draft Expires October 2002 31
OSPFv3 MIB April 2002
"Information about this router's virtual inter-
faces."
REFERENCE
"OSPF Version 2, Appendix C.4 Virtual link
parameters"
::= { ospfv3Objects 8 }
ospfv3VirtIfEntry OBJECT-TYPE
SYNTAX Ospfv3VirtIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single Virtual Interface."
INDEX { ospfv3VirtIfAreaId,
ospfv3VirtIfNeighbor }
::= { ospfv3VirtIfTable 1 }
Ospfv3VirtIfEntry ::= SEQUENCE {
ospfv3VirtIfAreaId
AreaID,
ospfv3VirtIfNeighbor
RouterID,
ospfv3VirtIfIndex
InterfaceIndex,
ospfv3VirtIfTransitDelay
UpToMaxAge,
ospfv3VirtIfRetransInterval
UpToMaxAge,
ospfv3VirtIfHelloInterval
HelloRange,
ospfv3VirtIfRtrDeadInterval
Unsigned32,
ospfv3VirtIfState
INTEGER,
ospfv3VirtIfEvents
Counter32,
ospfv3VirtIfStatus
RowStatus,
ospfv3VirtIfLinkScopeLsaCount
Gauge32,
ospfv3VirtIfLinkLsaCksumSum
Integer32
}
ospfv3VirtIfAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Transit Area that the Virtual Link
traverses. By definition, this is not 0.0.0.0"
::= { ospfv3VirtIfEntry 1 }
Internet Draft Expires October 2002 32
OSPFv3 MIB April 2002
ospfv3VirtIfNeighbor OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Router ID of the Virtual Neighbor."
::= { ospfv3VirtIfEntry 2 }
ospfv3VirtIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface ID assigned to this OSPFv3 virtual
interface. It is advertised in Hello's sent over
the virtal link and in the router's router-LSAs."
::= { ospfv3VirtIfEntry 3 }
ospfv3VirtIfTransitDelay OBJECT-TYPE
SYNTAX UpToMaxAge
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The estimated number of seconds it takes to
transmit a link- state update packet over this
interface."
DEFVAL { 1 }
::= { ospfv3VirtIfEntry 4 }
ospfv3VirtIfRetransInterval OBJECT-TYPE
SYNTAX UpToMaxAge
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request packets. This
value should be well over the expected round-
trip time."
DEFVAL { 5 }
::= { ospfv3VirtIfEntry 5 }
ospfv3VirtIfHelloInterval OBJECT-TYPE
SYNTAX HelloRange
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The length of time, in seconds, between the
Internet Draft Expires October 2002 33
OSPFv3 MIB April 2002
Hello packets that the router sends on the in-
terface. This value must be the same for the
virtual neighbor."
DEFVAL { 10 }
::= { ospfv3VirtIfEntry 6 }
ospfv3VirtIfRtrDeadInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for the virtual neigh-
bor."
DEFVAL { 60 }
::= { ospfv3VirtIfEntry 7 }
ospfv3VirtIfState OBJECT-TYPE
SYNTAX INTEGER {
down(1), -- these use the same encoding
pointToPoint(4) -- as the ospfv3IfTable
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OSPF virtual interface states."
::= { ospfv3VirtIfEntry 8 }
ospfv3VirtIfEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of state changes or error events on
this Virtual Link"
::= { ospfv3VirtIfEntry 9 }
ospfv3VirtIfStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6]."
::= { ospfv3VirtIfEntry 10 }
ospfv3VirtIfLinkScopeLsaCount OBJECT-TYPE
SYNTAX Gauge32
Internet Draft Expires October 2002 34
OSPFv3 MIB April 2002
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Link-Scope link-state
advertisements in this virtual link's link-state
database."
::= { ospfv3VirtIfEntry 11 }
ospfv3VirtIfLinkLsaCksumSum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
virtual link's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers."
::= { ospfv3VirtIfEntry 12 }
-- OSPFv3 Neighbor Table
-- The OSPFv3 Neighbor Table describes all neighbors in
-- the locality of the subject router.
ospfv3NbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3NbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of non-virtual neighbor information."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
::= { ospfv3Objects 9 }
ospfv3NbrEntry OBJECT-TYPE
SYNTAX Ospfv3NbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single neighbor."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
INDEX { ospfv3NbrIfIndex,
ospfv3NbrRtrId }
::= { ospfv3NbrTable 1 }
Ospfv3NbrEntry ::= SEQUENCE {
ospfv3NbrIfIndex
InterfaceIndex,
Internet Draft Expires October 2002 35
OSPFv3 MIB April 2002
ospfv3NbrRtrId
RouterID,
ospfv3NbrAddressType
InetAddressType,
ospfv3NbrAddress
InetAddress,
ospfv3NbrOptions
Integer32,
ospfv3NbrPriority
DesignatedRouterPriority,
ospfv3NbrState
INTEGER,
ospfv3NbrEvents
Counter32,
ospfv3NbrLsRetransQLen
Gauge32,
ospfv3NbrHelloSuppressed
TruthValue,
ospfv3NbrIfId
InterfaceIndex
}
ospfv3NbrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local link ID of the link over which the
neighbor can be reached."
::= { ospfv3NbrEntry 1 }
ospfv3NbrRtrId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32-bit integer (represented as a type IpAd-
dress) uniquely identifying the neighboring
router in the Autonomous System."
::= { ospfv3NbrEntry 2 }
ospfv3NbrAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of ospfv3NbrAddress. Only IPv6
addresses without zone index are expected."
::= { ospfv3NbrEntry 3 }
ospfv3NbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS read-only
Internet Draft Expires October 2002 36
OSPFv3 MIB April 2002
STATUS current
DESCRIPTION
"The IPv6 address of the neighbor associated with
the local link."
::= { ospfv3NbrEntry 4 }
ospfv3NbrOptions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Bit Mask corresponding to the neighbor's op-
tions field."
REFERENCE
"OSPF Version 3, Appendix A.2 the Options field"
::= { ospfv3NbrEntry 5 }
ospfv3NbrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority of this neighbor in the designat-
ed router election algorithm. The value 0 sig-
nifies that the neighbor is not eligible to be-
come the designated router on this particular
network."
::= { ospfv3NbrEntry 6 }
ospfv3NbrState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
twoWay(4),
exchangeStart(5),
exchange(6),
loading(7),
full(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The State of the relationship with this Neigh-
bor."
REFERENCE
"OSPF Version 2, Section 10.1 Neighbor States"
::= { ospfv3NbrEntry 7 }
ospfv3NbrEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
Internet Draft Expires October 2002 37
OSPFv3 MIB April 2002
DESCRIPTION
"The number of times this neighbor relationship
has changed state, or an error has occurred."
::= { ospfv3NbrEntry 8 }
ospfv3NbrLsRetransQLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current length of the retransmission
queue."
::= { ospfv3NbrEntry 9 }
ospfv3NbrHelloSuppressed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Hellos are being suppressed
to the neighbor"
::= { ospfv3NbrEntry 10 }
ospfv3NbrIfId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface ID that the neighbor advertises
in its Hello Packets on this link, that is, the
neighbor's local interface index."
::= { ospfv3NbrEntry 11 }
-- OSPFv3 NBMA Neighbor Table
-- The OSPFv3 NBMA Neighbor Table describes all configured
-- NBMA neighbors and neighbors dynamically discovered by
-- lower-level protocols such as Inverse Neighbor Discovery.
ospfv3NbmaNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3NbmaNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of configured non-virtual neighbor
information and neighbors dynamically discovered
by lower-level protocols such as Inverse Neighbor
Discovery."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
::= { ospfv3Objects 10 }
Internet Draft Expires October 2002 38
OSPFv3 MIB April 2002
ospfv3NbmaNbrEntry OBJECT-TYPE
SYNTAX Ospfv3NbmaNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single configured
neighbor or neighbor discovered by lower-level
protocols such as Inverse Neighbor Discovery."
REFERENCE
"OSPF Version 2, Section 10 The Neighbor Data
Structure"
INDEX { ospfv3NbmaNbrIfIndex,
ospfv3NbmaNbrAddressType,
ospfv3NbmaNbrAddress }
::= { ospfv3NbmaNbrTable 1 }
Ospfv3NbmaNbrEntry ::= SEQUENCE {
ospfv3NbmaNbrIfIndex
InterfaceIndex,
ospfv3NbmaNbrAddressType
InetAddressType,
ospfv3NbmaNbrAddress
InetAddress,
ospfv3NbmaNbrPriority
DesignatedRouterPriority,
ospfv3NbmaNbrRtrId
RouterID,
ospfv3NbmaNbrState
INTEGER,
ospfv3NbmaNbrStorageType
StorageType,
ospfv3NbmaNbrStatus
RowStatus
}
ospfv3NbmaNbrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local link ID of the link over which the
neighbor can be reached."
::= { ospfv3NbmaNbrEntry 1 }
ospfv3NbmaNbrAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of ospfv3NbrAddress. Only IPv6
addresses without zone index are expected."
::= { ospfv3NbmaNbrEntry 2 }
Internet Draft Expires October 2002 39
OSPFv3 MIB April 2002
ospfv3NbmaNbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 address of the neighbor associated with
the local link."
::= { ospfv3NbmaNbrEntry 3 }
ospfv3NbmaNbrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority of this neighbor in the designat-
ed router election algorithm. The value 0 sig-
nifies that the neighbor is not eligible to be-
come the designated router on this particular
network."
DEFVAL { 1 }
::= { ospfv3NbmaNbrEntry 4 }
ospfv3NbmaNbrRtrId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A 32-bit integer (represented as a type IpAd-
dress) uniquely identifying the neighboring
router in the Autonomous System. A value of
0.0.0.0 is returned until a Hello is received
from the configured neighbor."
::= { ospfv3NbmaNbrEntry 5 }
ospfv3NbmaNbrState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
twoWay(4),
exchangeStart(5),
exchange(6),
loading(7),
full(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The State of the relationship with this Neigh-
bor."
REFERENCE
"OSPF Version 2, Section 10.1 Neighbor States"
::= { ospfv3NbmaNbrEntry 6 }
Internet Draft Expires October 2002 40
OSPFv3 MIB April 2002
ospfv3NbmaNbrStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
Manually configured entries will have a storage type
of nonVolatile while entries dynamically created as a
result of a lower-level protocol such as Inverse
Neighbor Discovery will have a storage type of
volatile."
DEFVAL { nonVolatile }
::= { ospfv3NbmaNbrEntry 7 }
ospfv3NbmaNbrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6]."
::= { ospfv3NbmaNbrEntry 8 }
-- OSPFv3 Virtual Neighbor Table
-- This table describes all virtual neighbors.
-- Since Virtual Links are configured in the
-- virtual interface table, this table is read-only.
ospfv3VirtNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3VirtNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of virtual neighbor information."
REFERENCE
"OSPF Version 2, Section 15 Virtual Links"
::= { ospfv3Objects 11 }
ospfv3VirtNbrEntry OBJECT-TYPE
SYNTAX Ospfv3VirtNbrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Virtual neighbor information."
INDEX { ospfv3VirtNbrArea,
ospfv3VirtNbrRtrId }
::= { ospfv3VirtNbrTable 1 }
Internet Draft Expires October 2002 41
OSPFv3 MIB April 2002
Ospfv3VirtNbrEntry ::= SEQUENCE {
ospfv3VirtNbrArea
AreaID,
ospfv3VirtNbrRtrId
RouterID,
ospfv3VirtNbrIfIndex
InterfaceIndex,
ospfv3VirtNbrAddressType
InetAddressType,
ospfv3VirtNbrAddress
InetAddress,
ospfv3VirtNbrOptions
Integer32,
ospfv3VirtNbrState
INTEGER,
ospfv3VirtNbrEvents
Counter32,
ospfv3VirtNbrLsRetransQLen
Gauge32,
ospfv3VirtNbrHelloSuppressed
TruthValue,
ospfv3VirtNbrIfId
InterfaceIndex
}
ospfv3VirtNbrArea OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Transit Area Identifier."
::= { ospfv3VirtNbrEntry 1 }
ospfv3VirtNbrRtrId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32-bit integer uniquely identifying the
neighboring router in the Autonomous System."
::= { ospfv3VirtNbrEntry 2 }
ospfv3VirtNbrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local interface ID for the virtual link over
which the neighbor can be reached."
::= { ospfv3VirtNbrEntry 3 }
ospfv3VirtNbrAddressType OBJECT-TYPE
SYNTAX InetAddressType
Internet Draft Expires October 2002 42
OSPFv3 MIB April 2002
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type of ospfv3VirtNbrAddress. Only IPv6
addresses without zone index are expected."
::= { ospfv3VirtNbrEntry 4 }
ospfv3VirtNbrAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IPv6 address advertised by this Virtual Neighbor.
It must be a Site-Local or Global scope address."
::= { ospfv3VirtNbrEntry 5 }
ospfv3VirtNbrOptions OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Bit Mask corresponding to the neighbor's op-
tions field."
REFERENCE
"OSPF Version 3, Appendix A.2 the Options field"
::= { ospfv3VirtNbrEntry 6 }
ospfv3VirtNbrState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
attempt(2),
init(3),
twoWay(4),
exchangeStart(5),
exchange(6),
loading(7),
full(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Virtual Neighbor Relation-
ship."
::= { ospfv3VirtNbrEntry 7 }
ospfv3VirtNbrEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this virtual link has
changed its state, or an error has occurred."
::= { ospfv3VirtNbrEntry 8 }
Internet Draft Expires October 2002 43
OSPFv3 MIB April 2002
ospfv3VirtNbrLsRetransQLen OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current length of the retransmission
queue."
::= { ospfv3VirtNbrEntry 9 }
ospfv3VirtNbrHelloSuppressed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether Hellos are being suppressed
to the neighbor"
::= { ospfv3VirtNbrEntry 10 }
ospfv3VirtNbrIfId OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface ID that the neighbor advertises
in its Hello Packets on this virtual link, that is,
the neighbor's local interface ID."
::= { ospfv3VirtNbrEntry 11 }
--
-- The OSPFv3 Area Aggregate Table
--
ospfv3AreaAggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ospfv3AreaAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range sub-
sumes another range the most specific match is
the preferred one."
::= { ospfv3Objects 12 }
ospfv3AreaAggregateEntry OBJECT-TYPE
SYNTAX Ospfv3AreaAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range sub-
Internet Draft Expires October 2002 44
OSPFv3 MIB April 2002
sumes another range the most specific match is
the preferred one."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
INDEX { ospfv3AreaAggregateAreaID,
ospfv3AreaAggregateAreaLsdbType,
ospfv3AreaAggregatePrefixType,
ospfv3AreaAggregatePrefix,
ospfv3AreaAggregatePrefixLength }
::= { ospfv3AreaAggregateTable 1 }
Ospfv3AreaAggregateEntry ::= SEQUENCE {
ospfv3AreaAggregateAreaID
AreaID,
ospfv3AreaAggregateAreaLsdbType
INTEGER,
ospfv3AreaAggregatePrefixType
InetAddressType,
ospfv3AreaAggregatePrefix
InetAddress,
ospfv3AreaAggregatePrefixLength
InetAddressPrefixLength,
ospfv3AreaAggregateStatus
RowStatus,
ospfv3AreaAggregateEffect
INTEGER
}
ospfv3AreaAggregateAreaID OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Area the Address Aggregate is to be found
within."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3AreaAggregateEntry 1 }
ospfv3AreaAggregateAreaLsdbType OBJECT-TYPE
SYNTAX INTEGER {
interAreaPrefixLsa(8195), -- 0x2003
nssaExternalLsa(8199) -- 0x2007
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the Address Aggregate. This field
specifies the Area Lsdb type that this Address Ag-
gregate applies to."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header"
Internet Draft Expires October 2002 45
OSPFv3 MIB April 2002
::= { ospfv3AreaAggregateEntry 2 }
ospfv3AreaAggregatePrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix type of ospfv3AreaAggregatePrefix. Only
IPv6 addresses are expected."
::= { ospfv3AreaAggregateEntry 4 }
ospfv3AreaAggregatePrefix OBJECT-TYPE
SYNTAX InetAddress (SIZE (0..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IPv6 Prefix."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3AreaAggregateEntry 5 }
ospfv3AreaAggregatePrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength (3..128)
UNITS "bits"
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The length of the prefix (in bits). A prefix can
not be shorter than 3 bits."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters"
::= { ospfv3AreaAggregateEntry 6 }
ospfv3AreaAggregateStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable controls the status of the en-
try. The use of RowStatus is covered in more detail
in [6]."
::= { ospfv3AreaAggregateEntry 7 }
ospfv3AreaAggregateEffect OBJECT-TYPE
SYNTAX INTEGER {
advertiseMatching(1),
doNotAdvertiseMatching(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Prefixes subsumed by ranges either trigger the
advertisement of the indicated aggregate (ad-
Internet Draft Expires October 2002 46
OSPFv3 MIB April 2002
vertiseMatching), or result in the prefix not
being advertised at all outside the area."
DEFVAL { advertiseMatching }
::= { ospfv3AreaAggregateEntry 8 }
-- conformance information
ospfv3Groups OBJECT IDENTIFIER ::= { ospfv3Conformance 1 }
ospfv3Compliances OBJECT IDENTIFIER ::= { ospfv3Conformance 2 }
-- compliance statements
ospfv3Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement "
MODULE -- this module
MANDATORY-GROUPS {
ospfv3BasicGroup,
ospfv3AreaGroup,
ospfv3IfGroup,
ospfv3VirtIfGroup,
ospfv3NbrGroup,
ospfv3NbmaNbrGroup,
ospfv3VirtNbrGroup,
ospfv3AreaAggregateGroup
}
GROUP ospfv3AsLsdbGroup
DESCRIPTION
"This group is required for OSPFv3 systems that
display their AS-scope link state database."
GROUP ospfv3AreaLsdbGroup
DESCRIPTION
"This group is required for OSPFv3 systems that
display their Area-scope link state database."
GROUP ospfv3LinkLsdbGroup
DESCRIPTION
"This group is required for OSPFv3 systems that
display their Link-scope link state database."
GROUP ospfv3HostGroup
DESCRIPTION
"This group is required for OSPFv3 systems that
support attached hosts."
OBJECT ospfv3HostAddressType
SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION
"An implementation is only required to support IPv6
address without zone index."
Internet Draft Expires October 2002 47
OSPFv3 MIB April 2002
OBJECT ospfv3NbrAddressType
SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION
"An implementation is only required to support IPv6
address without zone index."
OBJECT ospfv3NbmaNbrAddressType
SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION
"An implementation is only required to support IPv6
address without zone index."
OBJECT ospfv3VirtNbrAddressType
SYNTAX InetAddressType { ipv6(2) }
DESCRIPTION
"An implementation is only required to support IPv6
address without zone index."
::= { ospfv3Compliances 1 }
-- units of conformance
ospfv3BasicGroup OBJECT-GROUP
OBJECTS {
ospfv3RouterId,
ospfv3AdminStat,
ospfv3VersionNumber,
ospfv3AreaBdrRtrStatus,
ospfv3ASBdrRtrStatus,
ospfv3AsScopeLsaCount,
ospfv3AsScopeLsaCksumSum,
ospfv3OriginateNewLsas,
ospfv3RxNewLsas,
ospfv3ExtAreaLsdbLimit,
ospfv3MulticastExtensions,
ospfv3ExitOverflowInterval,
ospfv3DemandExtensions,
ospfv3TrafficEngineeringSupport
}
STATUS current
DESCRIPTION
"These objects are required for OSPFv3 systems."
::= { ospfv3Groups 1 }
ospfv3AreaGroup OBJECT-GROUP
OBJECTS {
ospfv3ImportAsExtern,
ospfv3SpfRuns,
ospfv3AreaBdrRtrCount,
ospfv3AsBdrRtrCount,
ospfv3AreaScopeLsaCount,
ospfv3AreaScopeLsaCksumSum,
Internet Draft Expires October 2002 48
OSPFv3 MIB April 2002
ospfv3AreaSummary,
ospfv3AreaStatus,
ospfv3StubMetric,
ospfv3AreaNssaTranslatorRole,
ospfv3AreaNssaTranslatorState,
ospfv3AreaNssaTranslatorStabilityInterval,
ospfv3AreaNssaTranslatorEvents
}
STATUS current
DESCRIPTION
"These objects are required for OSPFv3 systems
supporting areas."
::= { ospfv3Groups 2 }
ospfv3AsLsdbGroup OBJECT-GROUP
OBJECTS {
ospfv3AsLsdbSequence,
ospfv3AsLsdbAge,
ospfv3AsLsdbChecksum,
ospfv3AsLsdbAdvertisement
}
STATUS current
DESCRIPTION
"These objects are required for OSPFv3 systems
that display their AS-scope link state database."
::= { ospfv3Groups 3 }
ospfv3AreaLsdbGroup OBJECT-GROUP
OBJECTS {
ospfv3AreaLsdbSequence,
ospfv3AreaLsdbAge,
ospfv3AreaLsdbChecksum,
ospfv3AreaLsdbAdvertisement
}
STATUS current
DESCRIPTION
"These objects are required for OSPFv3 systems
that display their Area-scope link state database."
::= { ospfv3Groups 4 }
ospfv3LinkLsdbGroup OBJECT-GROUP
OBJECTS {
ospfv3LinkLsdbSequence,
ospfv3LinkLsdbAge,
ospfv3LinkLsdbChecksum,
ospfv3LinkLsdbAdvertisement
}
STATUS current
DESCRIPTION
"These objects are required for OSPFv3 systems
that display their Link-scope link state database."
::= { ospfv3Groups 5 }
Internet Draft Expires October 2002 49
OSPFv3 MIB April 2002
ospfv3HostGroup OBJECT-GROUP
OBJECTS {
ospfv3HostMetric,
ospfv3HostStatus,
ospfv3HostAreaID
}
STATUS current
DESCRIPTION
"These objects are required for OSPFv3 systems
that support attached hosts."
::= { ospfv3Groups 6 }
ospfv3IfGroup OBJECT-GROUP
OBJECTS {
ospfv3IfAreaId,
ospfv3IfType,
ospfv3IfAdminStat,
ospfv3IfRtrPriority,
ospfv3IfTransitDelay,
ospfv3IfRetransInterval,
ospfv3IfHelloInterval,
ospfv3IfRtrDeadInterval,
ospfv3IfPollInterval,
ospfv3IfState,
ospfv3IfDesignatedRouter,
ospfv3IfBackupDesignatedRouter,
ospfv3IfEvents,
ospfv3IfStatus,
ospfv3IfMulticastForwarding,
ospfv3IfDemand,
ospfv3IfMetricValue,
ospfv3IfLinkScopeLsaCount,
ospfv3IfLinkLsaCksumSum,
ospfv3IfInstId
}
STATUS current
DESCRIPTION
"These interface objects are required for
OSPFv3 systems."
::= { ospfv3Groups 7 }
ospfv3VirtIfGroup OBJECT-GROUP
OBJECTS {
ospfv3VirtIfIndex,
ospfv3VirtIfTransitDelay,
ospfv3VirtIfRetransInterval,
ospfv3VirtIfHelloInterval,
ospfv3VirtIfRtrDeadInterval,
ospfv3VirtIfState,
ospfv3VirtIfEvents,
ospfv3VirtIfStatus,
ospfv3VirtIfLinkScopeLsaCount,
ospfv3VirtIfLinkLsaCksumSum
Internet Draft Expires October 2002 50
OSPFv3 MIB April 2002
}
STATUS current
DESCRIPTION
"These virtual interface objects are required for
OSPFv3 systems."
::= { ospfv3Groups 8 }
ospfv3NbrGroup OBJECT-GROUP
OBJECTS {
ospfv3NbrAddressType,
ospfv3NbrAddress,
ospfv3NbrOptions,
ospfv3NbrPriority,
ospfv3NbrState,
ospfv3NbrEvents,
ospfv3NbrLsRetransQLen,
ospfv3NbrHelloSuppressed,
ospfv3NbrIfId
}
STATUS current
DESCRIPTION
"These neighbor objects are required for
OSPFv3 systems."
::= { ospfv3Groups 9 }
ospfv3NbmaNbrGroup OBJECT-GROUP
OBJECTS {
ospfv3NbmaNbrPriority,
ospfv3NbmaNbrRtrId,
ospfv3NbmaNbrState,
ospfv3NbmaNbrStorageType,
ospfv3NbmaNbrStatus
}
STATUS current
DESCRIPTION
"These NBMA neighbor objects are required for
OSPFv3 systems."
::= { ospfv3Groups 10 }
ospfv3VirtNbrGroup OBJECT-GROUP
OBJECTS {
ospfv3VirtNbrIfIndex,
ospfv3VirtNbrAddressType,
ospfv3VirtNbrAddress,
ospfv3VirtNbrOptions,
ospfv3VirtNbrState,
ospfv3VirtNbrEvents,
ospfv3VirtNbrLsRetransQLen,
ospfv3VirtNbrHelloSuppressed,
ospfv3VirtNbrIfId
}
STATUS current
DESCRIPTION
Internet Draft Expires October 2002 51
OSPFv3 MIB April 2002
"These virtual neighbor objects are required for
OSPFv3 systems."
::= { ospfv3Groups 11 }
ospfv3AreaAggregateGroup OBJECT-GROUP
OBJECTS {
ospfv3AreaAggregateStatus,
ospfv3AreaAggregateEffect
}
STATUS current
DESCRIPTION
"These area aggregate objects are required for
OSPFv3 systems."
::= { ospfv3Groups 12 }
END
6. Acknowledgements
This document is based on the MIB for OSPF version 2 by Rob
Coltun and Fred Baker [18].
7. References
[1] Harrington, D., Presuhn, R., and B. Wijnen, "An
Architecture for Describing SNMP Management Frameworks",
RFC 2571, April 1999
[2] Rose, M., and K. McCloghrie, "Structure and
Identification of Management Information for TCP/IP-based
Internets", STD 16, RFC 1155, May 1990
[3] Rose, M., and K. McCloghrie, "Concise MIB Definitions",
STD 16, RFC 1212, March 1991
[4] M. Rose, "A Convention for Defining Traps for use with
the SNMP", RFC 1215, March 1991
[5] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Structure of Management
Information Version 2 (SMIv2)", STD 58, RFC 2578, April
1999
[6] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Textual Conventions for
SMIv2", STD 58, RFC 2579, April 1999
[7] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Conformance Statements for
SMIv2", STD 58, RFC 2580, April 1999
[8] Case, J., Fedor, M., Schoffstall, M., and J. Davin,
"Simple Network Management Protocol", STD 15, RFC 1157,
Internet Draft Expires October 2002 52
OSPFv3 MIB April 2002
May 1990.
[9] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Introduction to Community-based SNMPv2", RFC 1901,
January 1996.
[10] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Transport Mappings for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1906, January 1996.
[11] Case, J., Harrington D., Presuhn R., and B. Wijnen,
"Message Processing and Dispatching for the Simple
Network Management Protocol (SNMP)", RFC 2572, April 1999
[12] Blumenthal, U., and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", RFC 2574, April 1999
[13] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Protocol Operations for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1905, January 1996.
[14] Levi, D., Meyer, P., and B. Stewart, "SNMPv3
Applications", RFC 2573, April 1999
[15] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based
Access Control Model (VACM) for the Simple Network
Management Protocol (SNMP)", RFC 2575, April 1999
[16] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction to Version 3 of the Internet-standard
Network Management Framework", RFC 2570, April 1999
[17] Deering, S., and R. Hinden, "Internet Protocol, Version 6
(IPv6) Specification", RFC 2460, December 1998.
[18] Baker, F., and Coltun, R., "OSPF Version 2 Management
Information Base", RFC 1850, November 1995.
[19] Coltun, R., Ferguson, D., Moy, J., "OSPF for IPv6", RFC
2740, December 1999.
[20] Haskin, D., Onishi, S., "Management Information Base for
IP Version 6: Textual Conventions and General Group", RFC
2465, December 1998.
[21] Moy, J., "OSPF Version 2", RFC 2328, April 1998.
8. Security Considerations
There are a number of management objects defined in this MIB
Internet Draft Expires October 2002 53
OSPFv3 MIB April 2002
that have a MAX-ACCESS clause of read-write and/or read-
create. Such objects may be considered sensitive or
vulnerable in some network environments. The support for SET
operations in a non-secure environment without proper
protection can have a negative effect on network operations.
SNMPv1 by itself is not a secure environment. Even if the network
itself is secure (for example by using IPSec), even then, there is
no control as to who on the secure network is allowed to access and
GET/SET (read/change/create/delete) the objects in this MIB.
It is recommended that the implementers consider the security
features as provided by the SNMPv3 framework. Specifically, the use
of the User-based Security Model RFC 2574 [12] and the View-
based Access Control Model RFC 2575 [15] is recommended.
It is then a customer/user responsibility to ensure that the SNMP
entity giving access to an instance of this MIB, is properly
configured to give access to the objects only to those principals
(users) that have legitimate rights to indeed GET or SET
(change/create/delete) them.
9. Authors' Addresses
Dan Joyal
Lucent Technologies
One Robbins Road
Westford, MA 01886
Email: joyal@lucent.com
Jacek Kwiatkowski
Intel Technology Poland
ul. Slowackiego 173
80-298 Gdansk, Poland
Email: jacek.kwiatkowski@intel.com
Sebastian Zwolinski
Intel Technology Poland
ul. Slowackiego 173
80-298 Gdansk, Poland
Email: sebastian.zwolinski@intel.com
A. Differences from RFC 1850
(1) Textual Conventions are imported from INET-ADDRESS-MIB,
IF-MIB and OSPF-MIB MIBs.
Internet Draft Expires October 2002 54
OSPFv3 MIB April 2002
(2) The "ospf" prefix for entity names is changed to
"ospfv3".
(3) General Group object name ospfVersionNumber is changed to
ospfv3VersionNumber and its value is changed from 2 to 3.
(4) General Group object name ospfExternLsaCount is changed
to ospfv3AsScopeLsaCount to indicate count of all AS-
scoped LSAs in the database.
(5) General Group object name ospfExternLsaCksumSum is
changed to ospfv3AsScopeCksumSum to indicate checksum of
all AS-scoped LSAs in the database.
(6) Removed General Group object ospfTOSSupport.
(7) Removed ospfAuthType object from Area entry.
(8) Changed object names ospfAreaLsaCount and
ospfAreaLsaCksumSum to ospfv3AreaScopeLsaCount and
ospfv3AreaScopeLsaCksumSum.
(9) Removed OSPF Area Default Metric Table.
(10) Added object ospfv3StubMetric to Area entry as substitute
for Area Default Metric Table.
(11) Changed name of External LSDB Table to AS-Scope LSDB
Table. Replaced object name prefix "ospfExtLsdb" with
"ospfv3AsLsdb".
(12) Changed name of LSDB Table to Area-Scope LSDB Table.
Replaced object name prefix "ospfLsdb" with
"ospfv3AreaLsdb".
(13) Added ospfv3LinkLsdbTable which contains all LSAs of
Link-Scope. Index of ospfv3LinkLsdbTable is interface
index, LSA Type, Router ID and LSID.
(14) Re-ordered Router ID and LSID index components of LSDB
table entries. Since LSIDs no longer have addressing
semantics, GET-NEXT operations on partial OIDs are more
useful when the Router ID component comes before the LSID
component.
(15) Address Range Table is removed.
(16) Removed ospfHostTOS from Host Table entry. Object
ospfHostIpAddress changed to ospfv3HostAddress with
SYNTAX changed from IpAddress to InetAddress.
(17) Added object ospfv3HostAddressType to Host Table entry to
Internet Draft Expires October 2002 55
OSPFv3 MIB April 2002
determine the address type of ospfv3HostAddress.
(18) The MAX-ACCESS value of object ospfv3HostAreaID is
changed to read-create.
(19) Objects ospfIfIpAddress and ospfAddressLessIf removed
from Interface entry and as Interface Table entry index
components.
(20) Object ospfv3IfIndex added to Interface Table entry with
SYNTAX InterfaceIndex. It replaces ospfIfIpAddress and
ospfAddressLessIf as the Interface Table entry index.
(21) The SYNTAX of objects ospfIfDesignatedRouter and
ospfIfBackupDesignatedRouter is changed from IpAddress to
RouterID.
(22) Objects ospfIfAuthType and ospfIfAuthKey are removed from
Interface and Virtual Interface entries.
(23) Added objects ospfv3IfLinkScopeLsaCount and
ospfv3IfLinkLsaCksumSum to Interface entry. They maintain
the count of Link-Scope LSAs and the checksum of the
Link-Scope LSA database associated with the interface.
(24) Removed OSPF Interface Metric Table. Metric is now
accessed via object ospfv3IfMetricValue in the Interface
entry.
(25) Added object ospfv3IfInstId to Interface entry to enable
the setting of the interface instance value of the
interface. The default value is zero.
(26) Added object ospfv3VirtIfIndex to Virtual Interface entry
which is used to assign a local interface ID to the
virtual interface.
(27) Added objects ospfv3VirtIfLinkScopeLsaCount and
ospfv3VirtIfLinkLsaCksumSum to Virtual Interface entry.
They maintain the count of Link-Scope LSAs and the
checksum of the Link-Scope LSA database associated with
the virtual interface.
(28) The Neighbor Table (ospfv3NbrTable) is a read-only table
and it contains only the neighbors that were learned from
LSAs.
(29) Removed objects ospfNbrIpAddr and ospfNbrAddressLessIndex
from Neighbor entry.
(30) Added object ospfv3NbrIfIndex to Neighbor entry. Index
components ospfNbrIpAddr and ospfNbrAddressLessIndex are
replaced with ospfv3NbrIfIndex and ospfv3NbrRtrId.
Internet Draft Expires October 2002 56
OSPFv3 MIB April 2002
(31) Added object ospfv3NbrAddressType to Neighbor entry to
determine the address type of ospfv3NbrAddress.
(32) Added object ospfv3NbrAddress to Neighbor entry. This
object contains the neighbor's IPv6 address.
(33) Removed objects ospfNbmaNbrStatus and
ospfNbmaNbrPermanence from Neighbor entry.
(34) Added object ospfv3NbrIfId to Neighbor entry. This object
contains the neighbor's local interface index from the
neighbor's hellos advertised on the link.
(35) The MAX-ACCESS value of object ospfNbrPriority is
changed to read-only. Removed DEFVAL for object
ospfv3NbrPriority.
(36) Added ospfv3NbmaNbrTable (NBMA Neighbor Table) which
contains all manually configured neighbors. Index of
ospfv3NbmaNbrTable is ospfv3NbmaNbrIfIndex,
ospfv3NbmaAddressType, ospfv3NbmaNbrAddress.
(37) Added object ospfv3VirtNbrIfIndex to Virtual Neighbor
entry. This is the interface index of the virtual link
over which the virtual neighbor is reached.
(38) Changed object name ospfVirtNbrIpAddr to
ospfv3VirtNbrAddress and SYNTAX from IpAddress to
InetAddress.
(39) Added object ospfv3VirtNbrAddressType to Virtual Neighbor
entry to determine the address type of
ospfv3VirtNbrAddress.
(40) Added object ospfv3VirtNbrIfId to Virtual Neighbor entry.
This is the virtual neighbor's local virtual interface
index from the neighbor's hellos advertised on the
virtual link.
(41) Changed object name ospfAreaAggregateMask to
ospfv3AreaAggregatePrefixLenth and SYNTAX from IpAddress
to InetAddressPrefixLength.
(42) Changed object name ospfAreaAggregateNet to
ospfv3AreaAggregatePrefix and SYNTAX from IpAddress to
InetAddress.
(43) Added object ospfv3AreaAggregatePrefixType to Area
Aggregate entry to determine the address type of
ospfv3AreaAggregatePrefix.
Internet Draft Expires October 2002 57
OSPFv3 MIB April 2002
(44) Index for Area Aggregate Table entry changed from
ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType,
ospfAreaAggregateNet, ospfAreaAggregateMask to
ospfv3AreaAggregateAreaID,
ospfv3AreaAggregateAreaLsdbType,
ospfv3AreaAggregatePrefixType, ospfv3AreaAggregatePrefix,
ospfv3AreaAggregatePrefixLength.
(45) Conformance information is changed to reflect object
groups removed or added.
(46) OSPFv3 traps are not defined.
(47) Added UNITS clause for the following objects:
ospfv3ExitOverflowInterval,
ospfv3AreaNssaTranslatorStabilityInterval,
ospfv3AsLsdbAge, ospfv3AreaLsdbAge, ospfv3LinkLsdbAge,
ospfv3IfTransitDelay, ospfv3IfRetransInterval,
ospfv3IfHelloInterval, ospfv3IfRtrDeadInterval,
ospfv3IfPollInterval, ospfv3VirtIfTransitDelay,
ospfv3VirtIfRetransInterval, ospfv3VirtIfHelloInterval,
ospfv3VirtIfRtrDeadInterval.
(48) Changed SYNTAX from PositiveInteger to Unsigned32 for
the following objects: ospfv3ExitOverflowInterval,
ospfv3IfRtrDeadInterval, ospfv3IfPollInterval,
ospfv3VirtIfRtrDeadInterval.
(49) Changed MAX-ACCESS of row indices from read-only to
not-accessible.
Full Copyright Statement
Copyright (C) The Internet Society (2001). All Rights
Reserved.
This document and translations of it may be copied and
furnished to others, and derivative works that comment on or
otherwise explain it or assist in its implementation may be
prepared, copied, published and distributed, in whole or in
part, without restriction of any kind, provided that the above
copyright notice and this paragraph are included on all such
copies and derivative works. However, this document itself
may not be modified in any way, such as by removing the
copyright notice or references to the Internet Society or
other Internet organizations, except as needed for the purpose
of developing Internet standards in which case the procedures
for copyrights defined in the Internet Standards process must
be followed, or as required to translate it into languages
other than English.
Internet Draft Expires October 2002 58
OSPFv3 MIB April 2002
The limited permissions granted above are perpetual and will
not be revoked by the Internet Society or its successors or
assigns.
This document and the information contained herein is provided
on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE
USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
Internet Draft Expires October 2002 59
| PAFTECH AB 2003-2026 | 2026-04-23 09:56:54 |