One document matched: draft-ietf-ospf-mt-mib-03.txt
Differences from draft-ietf-ospf-mt-mib-02.txt
Network Working Group N. Rawat
Internet-Draft R. Shrivastava
Intended status: Standards Track Cisco Systems
Expires: May 15, 2009 D. Kushi
F5
November 11, 2008
OSPF Version 2 MIB for Multi-Topology (MT) Routing
draft-ietf-ospf-mt-mib-03
Status of This Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on May 15, 2009.
Abstract
This memo defines an extension to the Open Shortest Path First
version 2 Management Information Base (OSPFv2 MIB) for use with
network management protocols in the Internet community. In
particular it describes objects and lists considerations for the
management of OSPF Multi-Topology routing.
Rawat, et al. Expires May 15, 2009 [Page 1]
Internet-Draft OSPFv2 MT MIB November 2008
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. Change Log . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1.1. Initial version . . . . . . . . . . . . . . . . . . . 3
1.1.2. August 2007 version . . . . . . . . . . . . . . . . . 3
1.1.3. April 2008 version . . . . . . . . . . . . . . . . . . 3
1.1.4. November 2008 version . . . . . . . . . . . . . . . . 3
2. The Internet-Standard Management Framework . . . . . . . . . . 3
3. Short Overview of Multi-topology routing. . . . . . . . . . . 4
4. Relationship to Other MIBs . . . . . . . . . . . . . . . . . . 4
5. MIB Overview . . . . . . . . . . . . . . . . . . . . . . . . . 5
5.1. Conformance Groups . . . . . . . . . . . . . . . . . . . . 5
5.1.1. The ospfMtGeneralGroup . . . . . . . . . . . . . . . . 5
5.1.2. The ospfMtConfigurationGroup . . . . . . . . . . . . . 5
5.1.3. The ospfMtAreaGroup . . . . . . . . . . . . . . . . . 5
5.1.4. The ospfMtAreaTopoGroup . . . . . . . . . . . . . . . 5
5.1.5. The ospfMtStubAreaGroup . . . . . . . . . . . . . . . 5
5.1.6. The ospfMtHostGroup . . . . . . . . . . . . . . . . . 5
5.1.7. The ospfMtIfMetricGroup . . . . . . . . . . . . . . . 6
5.1.8. The ospfMtVirtIfMetricGroup . . . . . . . . . . . . . 6
5.1.9. The ospfMtAreaAggregateGroup . . . . . . . . . . . . . 6
5.2. The OSPFv2-MT-MIB Module . . . . . . . . . . . . . . . . . 6
5.2.1. Mib Module . . . . . . . . . . . . . . . . . . . . . . 6
6. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 27
7. References . . . . . . . . . . . . . . . . . . . . . . . . . . 27
7.1. Normative References . . . . . . . . . . . . . . . . . . . 27
7.2. Informative References . . . . . . . . . . . . . . . . . . 27
Appendix A. IANA Considerations . . . . . . . . . . . . . . . . . 28
Appendix B. Security Considerations . . . . . . . . . . . . . . . 28
Rawat, et al. Expires May 15, 2009 [Page 2]
Internet-Draft OSPFv2 MT MIB November 2008
1. Introduction
This memo defines an extension to the Open Shortest Path First
version 2 Management Information Base (OSPFv2 MIB) for use with
network management protocols in the Internet community. In
particular it describes objects and lists considerations for the
management of OSPFv2 Multi-Topology routing.
1.1. Change Log
This section to be deleted when the document becomes approved.
1.1.1. Initial version
The initial version was submitted to the OSPF working group as a
working group document on January 12, 2007.
1.1.2. August 2007 version
The following changes were made for the version submitted to the IETF
as draft-ietf-ospf-mt-mib-01.txt:
Revised issue date.
Changed references to internet draft draft-ietf-ospf-mt-07 to
references to RFC4915.
1.1.3. April 2008 version
The following changes were made for the version submitted to the IETF
as draft-ietf-ospf-mt-mib-02.txt:
Revised issue date.
1.1.4. November 2008 version
The following changes were made for the version submitted to the IETF
as draft-ietf-ospf-mt-mib-03.txt:
Revised issue date.
2. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
Rawat, et al. Expires May 15, 2009 [Page 3]
Internet-Draft OSPFv2 MT MIB November 2008
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580].
3. Short Overview of Multi-topology routing.
The multi-topology extensions to OSPFv2 are changes to the base
version 2 specification enabling the construction of multiple routing
topologies through a network of routing nodes participating in the
protocol (through the use of these extensions). Multi-topology
routing (MT routing) is most useful in conjunction with class-based
packet forwarding. An individual routing topology may be associated
with a packet classifier; packets belonging to some defined class are
routed according to its associated routing topology.
Fundamentally, MT routing engenders a routing node with the ability
to automatically construct orthogonal routing topologies that provide
a node with the means to forward distinct IP packets having identical
destination IP addresses to different nexthop routers. A routing
node may, through packet inspection, associate a packet to a class; a
class may be associated with a distinct topology. For example, a
packet classifier may be defined that associates TCP traffic with
topology A and UDP traffic with topology B. It may be the case, for
example, that at any single instant of time, an IP packet bearing a
TCP payload destined for IP address Y is routed out interface I1
whereas an IP packet bearing a UDP payload destined for IP address Y
is routed out interface I2. This because I1 leads to the nexthop
router for topology A and I2 leads to the nexthop router for B; the
exemplified nexthop routers being distinct.
MT routing is essentially a reincarnation of TOS-based routing, the
principal difference being that packet classification decisions are
decoupled from the routing protocol itself -- any criteria may be
used to associate a packet with a topology, not simply the policy
implied by the encoded TOS byte definitions.
4. Relationship to Other MIBs
The OSPFv2 MIB [RFC1850][RFC4750] defines basic information for the
management of OSPFv2.
This MIB extends [RFC1850][RFC4750] to enable the management of MT
capable routing nodes. This MIB module introduces a scalar used to
determine a routing node's Multi-topology routing capabilities and a
Rawat, et al. Expires May 15, 2009 [Page 4]
Internet-Draft OSPFv2 MT MIB November 2008
set of tables that are used instead of, or in addition to, their
named equivalents contained within [RFC1850][RFC4750], in order to
manage Multi-topology routing.
It is envisaged that the value of the scalar 'ospfMtSupport', or the
absence of an instance of this object in a router's MIB, will be used
by applications to discover MT-capable routing nodes and hence used
to select an appropriate set of objects from within this MIB and
those contained within [RFC1850][RFC4750] to manage the device.
5. MIB Overview
This document defines the OSPFv2-MT-MIB module.
5.1. Conformance Groups
5.1.1. The ospfMtGeneralGroup
This group contains one object used to support the discovery of MT-
capable routers.
5.1.2. The ospfMtConfigurationGroup
This group contains objects used to associate a name with a multi-
topology identifier (MTID).
5.1.3. The ospfMtAreaGroup
This group contains an object used to configure an area-specific,
multi-topology routing specific parameter.
5.1.4. The ospfMtAreaTopoGroup
This group contains objects used to collect statistics and configure
parameters applicable to a topology within an area.
5.1.5. The ospfMtStubAreaGroup
This group contains objects used to configure metrics for topologies
advertised by a default Area Border Router into a stub area.
5.1.6. The ospfMtHostGroup
This group contains objects used to configure metrics for topologies
associated with attached hosts.
Rawat, et al. Expires May 15, 2009 [Page 5]
Internet-Draft OSPFv2 MT MIB November 2008
5.1.7. The ospfMtIfMetricGroup
This group contains objects used to configure metrics for topologies
configured on interfaces.
5.1.8. The ospfMtVirtIfMetricGroup
This group contains objects used to configure metrics for topologies
configured on virtual interfaces.
5.1.9. The ospfMtAreaAggregateGroup
This group contains objects used to configure address aggregation for
topologies.
5.2. The OSPFv2-MT-MIB Module
5.2.1. Mib Module
OSPFv2-MT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
mib-2,
Integer32,
Counter32,
IpAddress FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -- [RFC2580]
TEXTUAL-CONVENTION,
RowStatus,
TruthValue FROM SNMPv2-TC -- [RFC2579]
InterfaceIndexOrZero FROM IF-MIB -- [RFC2863]
AreaID,
ospfAreaEntry,
RouterID,
Metric,
BigMetric FROM OSPF-MIB; -- [RFC1850]
[RFC4750]
ospfMtMIB MODULE-IDENTITY
LAST-UPDATED "200811110000Z"
ORGANIZATION "IETF OSPF Working Group"
CONTACT-INFO
"WG E-Mail: ospf@peach.ease.lsoft.com
WG Chairs: acee@redback.com
akr@cisco.com
Rawat, et al. Expires May 15, 2009 [Page 6]
Internet-Draft OSPFv2 MT MIB November 2008
Namita Rawat
Cisco Systems
510 McCarthy Blvd.
Milpitas, CA 95035 USA
Rashmi Shrivastava
Cisco Systems
510 McCarthy Blvd.
Milpitas, CA 95035 USA
David M. Kushi
F5
401 Elliot Avenue W.
Seattle, WA
"
DESCRIPTION
"The MIB module for the management of OSPF Version 2
Multi-topology routing. This MIB module is used in
conjunction with the OSFPv2 MIB module to support
the Multi-topology extensions.
Copyright (C) The IETF Trust (2008).
This version of this MIB module is part of
RFC XXXX; see the RFC itself for full legal
notices."
REVISION "200811110000Z"
DESCRIPTION
"Initial version of this MIB."
::= { mib-2 nnn } -- to be determined later
ospfMtMIBObjects OBJECT IDENTIFIER ::= { ospfMtMIB 1 }
ospfMtMIBConformance OBJECT IDENTIFIER ::= { ospfMtMIB 2 }
ospfMtMIBNotifications OBJECT IDENTIFIER ::= { ospfMtMIB 0 }
ospfMtGeneral OBJECT IDENTIFIER ::= { ospfMtMIBObjects 1 }
ospfMtConfiguration OBJECT IDENTIFIER ::= { ospfMtMIBObjects 2 }
ospfMt OBJECT IDENTIFIER ::= { ospfMtMIBObjects 3 }
-- Textual Conventions
TopologyID ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-0"
STATUS current
DESCRIPTION
"A topology identifier.
Section 3.7 of RFC 4915 defines the mapping
of the topology id space."
Rawat, et al. Expires May 15, 2009 [Page 7]
Internet-Draft OSPFv2 MT MIB November 2008
REFERENCE
"RFC 4915, Multi-Topology (MT) Routing in OSPF"
SYNTAX Integer32 (0..127)
--
-- The objects used to manage OSPF MT
--
ospfMtSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This entity's support for Multi-topology routing.
When this object has a value of 'true' this entity
supports multi-topology routing. When the value is
'false' or when this object doesn't exist, this
entity doesn't support MT routing. This object is
instantiated by the agent during the managed system's
initialization."
::= { ospfMtGeneral 1 }
-- OSPF MT Topology Information
-- A table containing a list of topologies configured on the
-- ospf router and each topology's name.
ospfMtTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfMtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table mapping a configured topology id to a name."
REFERENCE
"RFC 4915, Multi-Topology (MT) Routing in OSPF"
::= { ospfMtConfiguration 1 }
ospfMtEntry OBJECT-TYPE
SYNTAX OspfMtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing one of the topologies
on the router.
The managed system creates a row for the
device's default topology. This row cannot
be destroyed by a management station."
Rawat, et al. Expires May 15, 2009 [Page 8]
Internet-Draft OSPFv2 MT MIB November 2008
REFERENCE
"RFC 4915, Multi-Topology (MT) Routing in OSPF"
INDEX { ospfMtTopoId }
::= { ospfMtTable 1 }
OspfMtEntry ::= SEQUENCE {
ospfMtTopoId TopologyID,
ospfMtTopoName OCTET STRING,
ospfMtTopoStatus RowStatus
}
ospfMtTopoId OBJECT-TYPE
SYNTAX TopologyID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID for a topology."
REFERENCE
"RFC 4915, Multi-Topology (MT) Routing in OSPF"
::= { ospfMtEntry 1 }
ospfMtTopoName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the topology."
REFERENCE
"RFC 4915, Multi-Topology (MT) Routing in OSPF"
::= { ospfMtEntry 2 }
ospfMtTopoStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction and destruction. The value of
this object has no effect on whether other
objects in this conceptual row can be modified."
::= { ospfMtEntry 3 }
-- Multi Topology OSPF Area Table
-- The OSPF MT Area Data Structure contains information
-- regarding the various areas. The interfaces and
-- virtual links are configured as part of these areas.
Rawat, et al. Expires May 15, 2009 [Page 9]
Internet-Draft OSPFv2 MT MIB November 2008
-- Area 0.0.0.0, by definition, is the Backbone Area. A
-- new object is added to the data structure to indicate
-- area's MT Routing Exclusion capability.
ospfMtAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfMtAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing area parameters supporting
Multi-topology routing.
The entries in this table augment the entries contained
within the ospfAreaTable; an augmenting entry is created
by the managed system when the value of ospfMtSupport is
'true'."
REFERENCE
"OSPF Version 2, Section 6 The Area Data Structure
and RFC 4915, Multi-Topology (MT) Routing in OSPF"
::= { ospfMt 1 }
ospfMtAreaEntry OBJECT-TYPE
SYNTAX OspfMtAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configured parameters
and cumulative statistics of one of the router's
attached areas."
AUGMENTS { ospfAreaEntry }
::= { ospfMtAreaTable 1 }
OspfMtAreaEntry ::= SEQUENCE {
ospfMtAreaExclusion TruthValue
}
ospfMtAreaExclusion OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the area's MT default exclusion
capability."
REFERENCE
"RFC 4915, Multi-Topology (MT) Routing in OSPF"
::= { ospfMtAreaEntry 1 }
-- Multi Topology OSPF Area Topology Table
Rawat, et al. Expires May 15, 2009 [Page 10]
Internet-Draft OSPFv2 MT MIB November 2008
-- This table gives topology specific information for the area.
ospfMtAreaTopoTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfMtAreaTopoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configured parameters
and cumulative statistics of the router's topologies
in an area."
REFERENCE
"RFC 4915, Multi-Topology (MT) Routing in OSPF"
::= { ospfMt 2 }
ospfMtAreaTopoEntry OBJECT-TYPE
SYNTAX OspfMtAreaTopoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information describing the configured parameters
and cumulative statistics of a topology in an area."
INDEX { ospfMtAreaTopoId, ospfMtAreaId }
::= { ospfMtAreaTopoTable 1 }
OspfMtAreaTopoEntry ::= SEQUENCE {
ospfMtAreaTopoId TopologyID,
ospfMtAreaId AreaID,
ospfMtSpfRuns Counter32,
ospfMtAreaSummary INTEGER,
ospfMtAreaTopoStatus RowStatus
}
ospfMtAreaTopoId OBJECT-TYPE
SYNTAX TopologyID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID for a topology; this can
be derived from the OSPF instance."
REFERENCE
"RFC 4915, Multi-Topology (MT) Routing in OSPF"
::= { ospfMtAreaTopoEntry 1 }
ospfMtAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Rawat, et al. Expires May 15, 2009 [Page 11]
Internet-Draft OSPFv2 MT MIB November 2008
"The 32 bit identifier for the Area. On creation,
this can be derived from the OSPF instance."
::= { ospfMtAreaTopoEntry 2 }
ospfMtSpfRuns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the SPF is run for a
given topology."
REFERENCE
"RFC 4915, Multi-Topology (MT) Routing in OSPF"
::= { ospfMtAreaTopoEntry 3 }
ospfMtAreaSummary OBJECT-TYPE
SYNTAX INTEGER {
noAreaSummary (1),
sendAreaSummary (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the importation of summary LSAs
into stub areas. It has no effect on other areas.
If its value is 'noAreaSummary', the router will
neither originate nor propagate summary LSAs into
the stub area. It will rely entirely on its default
route.
If its value is 'sendAreaSummary', the router will
both summarize and propagate summary LSAs."
DEFVAL { noAreaSummary }
::= { ospfMtAreaTopoEntry 4 }
ospfMtAreaTopoStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
Rawat, et al. Expires May 15, 2009 [Page 12]
Internet-Draft OSPFv2 MT MIB November 2008
::= { ospfMtAreaTopoEntry 5 }
-- OSPF MT Area Default Metric Table
-- The OSPF MT Area Default Metric Table describes the metrics
-- that a default Area Border Router advertises into a
-- Stub area for a particular topology. The ABR may advertise
-- different metrics for different topologies.
ospfMtStubAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfMtStubAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set of metrics that will be advertised
for a specific topology by a default Area
Border Router into a stub area."
REFERENCE
"OSPF Version 2, Appendix C.2, Area Parameters,
and RFC 4915, Multi-Topology (MT) Routing in OSPF"
::= { ospfMt 3 }
ospfMtStubAreaEntry OBJECT-TYPE
SYNTAX OspfMtStubAreaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The metric for a specific topology that will be
advertised by a default Area Border Router
into a stub area."
REFERENCE
"OSPF Version 2, Appendix C.2, Area Parameters
and RFC 4915, Multi-Topology (MT) Routing in OSPF"
INDEX { ospfMtStubAreaTopoId, ospfMtStubAreaId }
::= { ospfMtStubAreaTable 1 }
OspfMtStubAreaEntry ::= SEQUENCE {
ospfMtStubAreaTopoId TopologyID,
ospfMtStubAreaId AreaID,
ospfMtStubMetric BigMetric,
ospfMtStubMetricType INTEGER,
ospfMtStubStatus RowStatus
}
ospfMtStubAreaTopoId OBJECT-TYPE
SYNTAX TopologyID
MAX-ACCESS not-accessible
STATUS current
Rawat, et al. Expires May 15, 2009 [Page 13]
Internet-Draft OSPFv2 MT MIB November 2008
DESCRIPTION
"The ID for a topology; this can be derived
from the OSPF instance."
REFERENCE
"RFC 4915, Multi-Topology (MT) Routing in OSPF"
::= { ospfMtStubAreaEntry 1 }
ospfMtStubAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 32 bit identifier for the Stub Area; this
can be derived from the OSPF instance."
::= { ospfMtStubAreaEntry 2 }
ospfMtStubMetric OBJECT-TYPE
SYNTAX BigMetric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric value associated with a topology."
::= { ospfMtStubAreaEntry 3 }
ospfMtStubMetricType OBJECT-TYPE
SYNTAX INTEGER {
ospfMtMetric (1), -- OSPF Metric
comparableCost (2), -- external type 1
nonComparable (3) -- external type 2
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the type of metric advertised
as a default route."
DEFVAL { ospfMtMetric }
::= { ospfMtStubAreaEntry 4 }
ospfMtStubStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
Rawat, et al. Expires May 15, 2009 [Page 14]
Internet-Draft OSPFv2 MT MIB November 2008
whether other objects in this conceptual row can be
modified."
::= { ospfMtStubAreaEntry 5 }
-- OSPF MT Host Table
-- The Host/Metric Table is used to indicate which hosts are
-- directly attached to the managed router, and the set of metrics
-- that should be advertised for them.
--
ospfMtHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfMtHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of hosts and their associated metrics
that the router will advertise as host routes."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route parameters
and RFC 4915, Multi-Topology (MT) Routing in OSPF"
::= { ospfMt 4 }
ospfMtHostEntry OBJECT-TYPE
SYNTAX OspfMtHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A metric to be advertised, for a specific topology,
when a given host is reachable."
INDEX { ospfMtHostTopoId, ospfMtHostIpAddress }
::= { ospfMtHostTable 1 }
OspfMtHostEntry ::= SEQUENCE {
ospfMtHostTopoId TopologyID,
ospfMtHostIpAddress IpAddress,
ospfMtHostMetric Metric,
ospfMtHostAreaID AreaID,
ospfMtHostStatus RowStatus
}
ospfMtHostTopoId OBJECT-TYPE
SYNTAX TopologyID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID for a topology."
REFERENCE
"RFC 4915, Multi-Topology (MT) Routing in OSPF"
Rawat, et al. Expires May 15, 2009 [Page 15]
Internet-Draft OSPFv2 MT MIB November 2008
::= { ospfMtHostEntry 1 }
ospfMtHostIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address of the Host."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route parameters."
::= { ospfMtHostEntry 2 }
ospfMtHostMetric OBJECT-TYPE
SYNTAX Metric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Metric to be advertised."
REFERENCE
"OSPF Version 2, Appendix C.6 Host route parameters."
::= { ospfMtHostEntry 3 }
ospfMtHostAreaID OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Area in which the Host Entry is to be found.
By default, the area that a subsuming OSPF in-
terface is in, or 0.0.0.0."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters."
::= { ospfMtHostEntry 4 }
ospfMtHostStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { ospfMtHostEntry 5 }
Rawat, et al. Expires May 15, 2009 [Page 16]
Internet-Draft OSPFv2 MT MIB November 2008
-- OSPF MT Interface Metric Table
-- The Metric Table describes the metrics to be advertised
-- for a specified interface for the configured topologies.
-- As such, this table is an adjunct of the OSPF Interface
-- Table.
-- For the purposes of this specification, the measure of
-- bandwidth
-- Metric = 10^8 / ifSpeed
-- is the default value. For multiple link interfaces, note
-- that ifSpeed is the sum of the individual link speeds.
-- This yields a number having the following typical values:
-- Network Type/bit rate Metric
-- >= 100 MBPS 1
-- Ethernet/802.3 10
-- E1 48
-- T1 (ESF) 65
-- 64 KBPS 1562
-- 56 KBPS 1785
-- 19.2 KBPS 5208
-- 9.6 KBPS 10416
ospfMtIfMetricTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfMtIfMetricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The topology specific metrics for a non-virtual
interface identified by the interface index."
REFERENCE
"OSPF Version 2, Appendix C.3 Router interface
parameters and RFC 4915, Multi-Topology (MT) Routing
in OSPF"
::= { ospfMt 5 }
ospfMtIfMetricEntry OBJECT-TYPE
SYNTAX OspfMtIfMetricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular topology specific metric for
a non-virtual interface identified by the
interface index."
REFERENCE
Rawat, et al. Expires May 15, 2009 [Page 17]
Internet-Draft OSPFv2 MT MIB November 2008
"OSPF Version 2, Appendix C.3 Router interface
parameters."
INDEX { ospfMtIfMetricTopoId,
ospfMtIfMetricIpAddress,
ospfMtIfMetricAddressLessIf }
::= { ospfMtIfMetricTable 1 }
OspfMtIfMetricEntry ::= SEQUENCE {
ospfMtIfMetricTopoId TopologyID,
ospfMtIfMetricIpAddress IpAddress,
ospfMtIfMetricAddressLessIf InterfaceIndexOrZero,
ospfMtIfMetricValue Metric,
ospfMtIfMetricTopoStatus RowStatus
}
ospfMtIfMetricTopoId OBJECT-TYPE
SYNTAX TopologyID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The topology specific metric being referenced.
On row creation, this can be derived from the
OSPF instance."
::= { ospfMtIfMetricEntry 1 }
ospfMtIfMetricIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of this OSPF interface. On
row creation, this can be derived from the
OSPF instance."
::= { ospfMtIfMetricEntry 2 }
ospfMtIfMetricAddressLessIf OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For the purpose of easing the instancing of
addressed and addressless interfaces, this
object takes the value 0 on interfaces having
IP Addresses, and the value of ifIndex for
interfaces having no IP Address. On row
creation, this can be derived from the
OSPF instance."
::= { ospfMtIfMetricEntry 3 }
Rawat, et al. Expires May 15, 2009 [Page 18]
Internet-Draft OSPFv2 MT MIB November 2008
ospfMtIfMetricValue OBJECT-TYPE
SYNTAX Metric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric associated with this topology."
::= { ospfMtIfMetricEntry 4 }
ospfMtIfMetricTopoStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { ospfMtIfMetricEntry 5 }
-- OSPF MT Virtual Interface Metric Table
-- The Virtual Interface Metric Table describes the metrics to be
-- advertised for a specific virtual interface under a specific
-- topology. As such, this table is an adjunct of the OSPF Virtual
-- Interface Table.
ospfMtVirtIfMetricTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfMtVirtIfMetricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The topology specific metrics for a virtual
interface."
REFERENCE
"OSPF Version 2, Appendix C.3 Router interface
parameters and RFC 4915, Multi-Topology (MT) Routing
in OSPF"
::= { ospfMt 6 }
ospfMtVirtIfMetricEntry OBJECT-TYPE
SYNTAX OspfMtVirtIfMetricEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular topology specific metric for
Rawat, et al. Expires May 15, 2009 [Page 19]
Internet-Draft OSPFv2 MT MIB November 2008
a virtual interface."
REFERENCE
"OSPF Version 2, Appendix C.3 Router interface
parameters."
INDEX { ospfMtVirtIfMetricTopoId,
ospfMtVirtIfMetricArea,
ospfMtVirtIfMetricNbrRtrId,
ospfMtVirtIfMetricNbrIpAddress }
::= { ospfMtVirtIfMetricTable 1 }
OspfMtVirtIfMetricEntry ::= SEQUENCE {
ospfMtVirtIfMetricTopoId TopologyID,
ospfMtVirtIfMetricArea AreaID,
ospfMtVirtIfMetricNbrRtrId RouterID,
ospfMtVirtIfMetricNbrIpAddress IpAddress,
ospfMtVirtIfMetricValue Metric,
ospfMtVirtIfMetricTopoStatus RowStatus
}
ospfMtVirtIfMetricTopoId OBJECT-TYPE
SYNTAX TopologyID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The topology specific metric being referenced.
On row creation, this can be derived from the
OSPF instance."
::= { ospfMtVirtIfMetricEntry 1 }
ospfMtVirtIfMetricArea OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32 bit identifier for Area ID."
::= { ospfMtVirtIfMetricEntry 2 }
ospfMtVirtIfMetricNbrRtrId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A 32 bit identifier for Router ID."
::= { ospfMtVirtIfMetricEntry 3 }
ospfMtVirtIfMetricNbrIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
Rawat, et al. Expires May 15, 2009 [Page 20]
Internet-Draft OSPFv2 MT MIB November 2008
STATUS current
DESCRIPTION
"A 32 bit identifier identifying virtual neighbor
end point IP address."
::= { ospfMtVirtIfMetricEntry 4 }
ospfMtVirtIfMetricValue OBJECT-TYPE
SYNTAX Metric
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric associated with the topology."
::= { ospfMtVirtIfMetricEntry 5 }
ospfMtVirtIfMetricTopoStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { ospfMtVirtIfMetricEntry 6 }
-- The OSPF MT Area Aggregate Table
-- When the value of ospfMtSupport is 'true' this table is
-- used instead of the ospfAreaAggregate table defined
-- in RFC 1850 & RFC 4750. It is used to support aggregation
-- across multiple topologies.
ospfMtAreaAggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF OspfMtAreaAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A range of IP addresses specified by an IP
address/IP network mask pair. For example,
class B address range of X.X.X.X with a network
mask of 255.255.0.0 includes all IP addresses
from X.X.0.0 to X.X.255.255. Note that if
ranges are configured such that one range
subsumes another range (e.g., 10.0.0.0 mask
255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
most specific match is the preferred one."
Rawat, et al. Expires May 15, 2009 [Page 21]
Internet-Draft OSPFv2 MT MIB November 2008
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters.
and RFC 4915, Multi-Topology (MT) Routing in OSPF"
::= { ospfMt 7 }
ospfMtAreaAggregateEntry OBJECT-TYPE
SYNTAX OspfMtAreaAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A range of IP addresses specified by an IP
address/IP network mask pair. For example,
class B address range of X.X.X.X with a network
mask of 255.255.0.0 includes all IP addresses
from X.X.0.0 to X.X.255.255. Note that if
ranges are range configured such that one range
subsumes another range (e.g., 10.0.0.0 mask
255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the
most specific match is the preferred one."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters."
INDEX { ospfMtAreaAggregateTopoId,
ospfMtAreaAggregateAreaID,
ospfMtAreaAggregateLsdbType,
ospfMtAreaAggregateNet,
ospfMtAreaAggregateMask }
::= { ospfMtAreaAggregateTable 1 }
OspfMtAreaAggregateEntry ::= SEQUENCE {
ospfMtAreaAggregateTopoId TopologyID,
ospfMtAreaAggregateAreaID AreaID,
ospfMtAreaAggregateLsdbType INTEGER,
ospfMtAreaAggregateNet IpAddress,
ospfMtAreaAggregateMask IpAddress,
ospfMtAreaAggregateEffect INTEGER,
ospfMtAreaAggregateStatus RowStatus
}
ospfMtAreaAggregateTopoId OBJECT-TYPE
SYNTAX TopologyID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID for a topology."
REFERENCE
"RFC 4915, Multi Topology (MT) Routing in OSPF"
::= { ospfMtAreaAggregateEntry 1 }
Rawat, et al. Expires May 15, 2009 [Page 22]
Internet-Draft OSPFv2 MT MIB November 2008
ospfMtAreaAggregateAreaID OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Area in which the Address Aggregate is to
be found."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters."
::= { ospfMtAreaAggregateEntry 2 }
ospfMtAreaAggregateLsdbType OBJECT-TYPE
SYNTAX INTEGER {
summaryLink (3),
nssaExternalLink (7)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the Address Aggregate. This field
specifies the Lsdb type that this Address
Aggregate applies to."
REFERENCE
"OSPF Version 2, Appendix A.4.1 The Link State
Advertisement header."
::= { ospfMtAreaAggregateEntry 3 }
ospfMtAreaAggregateNet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP Address of the Net or Subnet indicated
by the range."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters."
::= { ospfMtAreaAggregateEntry 4 }
ospfMtAreaAggregateMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Subnet Mask that pertains to the Net or
Subnet."
REFERENCE
"OSPF Version 2, Appendix C.2 Area parameters."
::= { ospfMtAreaAggregateEntry 5 }
Rawat, et al. Expires May 15, 2009 [Page 23]
Internet-Draft OSPFv2 MT MIB November 2008
ospfMtAreaAggregateEffect OBJECT-TYPE
SYNTAX INTEGER {
advertiseMatching (1),
doNotAdvertiseMatching (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Subnets subsumed by ranges either trigger the
advertisement of the indicated aggregate
(advertiseMatching), or result in the subnet's
not being advertised at all outside the area."
DEFVAL { advertiseMatching }
::= { ospfMtAreaAggregateEntry 6 }
ospfMtAreaAggregateStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { ospfMtAreaAggregateEntry 7 }
-- Conformance
ospfMtMIBCompliances OBJECT IDENTIFIER ::= { ospfMtMIBConformance 1 }
ospfMtMIBGroups OBJECT IDENTIFIER ::= { ospfMtMIBConformance 2 }
ospfMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which support
OSPFv2 Multi-topology routing."
MODULE MANDATORY-GROUPS { ospfMtAreaGroup,
ospfMtAreaTopoGroup,
ospfMtStubAreaGroup,
ospfMtHostGroup,
ospfMtIfMetricGroup,
ospfMtVirtIfMetricGroup,
ospfMtAreaAggregateGroup }
GROUP ospfMtGeneralGroup
DESCRIPTION
Rawat, et al. Expires May 15, 2009 [Page 24]
Internet-Draft OSPFv2 MT MIB November 2008
"All systems supporting discovery of OSPFv2
capabilities should support this group."
GROUP ospfMtConfigurationGroup
DESCRIPTION
"Only systems that reference topologies by name
instead of number need to support this group."
::= { ospfMtMIBCompliances 1 }
-- Units of Conformance
ospfMtGeneralGroup OBJECT-GROUP
OBJECTS { ospfMtSupport }
STATUS current
DESCRIPTION
"A collection of objects used to manage OSPF
entities supporting Multi-topology routing."
::= { ospfMtMIBGroups 1 }
ospfMtConfigurationGroup OBJECT-GROUP
OBJECTS { ospfMtTopoName,
ospfMtTopoStatus }
STATUS current
DESCRIPTION
"A collection of objects used to manage OSPF
entities supporting Multi-topology routing."
::= { ospfMtMIBGroups 2 }
ospfMtAreaGroup OBJECT-GROUP
OBJECTS { ospfMtAreaExclusion }
STATUS current
DESCRIPTION
"A collection of objects used to manage OSPF
entities supporting Multi-topology routing and
areas."
::= { ospfMtMIBGroups 3 }
ospfMtAreaTopoGroup OBJECT-GROUP
OBJECTS { ospfMtSpfRuns,
ospfMtAreaSummary,
ospfMtAreaTopoStatus }
STATUS current
DESCRIPTION
"A collection of objects used to manage OSPF
entities supporting Multi-topology routing."
::= { ospfMtMIBGroups 4 }
ospfMtStubAreaGroup OBJECT-GROUP
Rawat, et al. Expires May 15, 2009 [Page 25]
Internet-Draft OSPFv2 MT MIB November 2008
OBJECTS { ospfMtStubMetric,
ospfMtStubMetricType,
ospfMtStubStatus }
STATUS current
DESCRIPTION
"A collection of objects used to manage OSPF
entities supporting Multi-topology routing."
::= { ospfMtMIBGroups 5 }
ospfMtHostGroup OBJECT-GROUP
OBJECTS { ospfMtHostMetric,
ospfMtHostAreaID,
ospfMtHostStatus }
STATUS current
DESCRIPTION
"A collection of objects used to manage OSPF
entities supporting Multi-topology routing."
::= { ospfMtMIBGroups 6 }
ospfMtIfMetricGroup OBJECT-GROUP
OBJECTS { ospfMtIfMetricValue,
ospfMtIfMetricTopoStatus }
STATUS current
DESCRIPTION
"A collection of objects used to manage OSPF
entities supporting Multi-topology routing."
::= { ospfMtMIBGroups 7 }
ospfMtVirtIfMetricGroup OBJECT-GROUP
OBJECTS { ospfMtVirtIfMetricValue,
ospfMtVirtIfMetricTopoStatus }
STATUS current
DESCRIPTION
"A collection of objects used to manage OSPF
entities supporting Multi-topology routing."
::= { ospfMtMIBGroups 8 }
ospfMtAreaAggregateGroup OBJECT-GROUP
OBJECTS { ospfMtAreaAggregateEffect,
ospfMtAreaAggregateStatus
}
STATUS current
DESCRIPTION
"A collection of objects used to manage OSPF
entities supporting Multi-topology routing."
::= { ospfMtMIBGroups 9 }
END
Rawat, et al. Expires May 15, 2009 [Page 26]
Internet-Draft OSPFv2 MT MIB November 2008
6. Acknowledgements
The authors wish to thank Bill Fenner, Tom Henderson, Acee Lindem,
Peter Psenak and Rajiv Raghunarayan for their helpful comments and
careful review of this document.
7. References
7.1. Normative References
[RFC1850] Baker, F. and R. Coltun, "OSPF Version 2 Management
Information Base", RFC 1850, November 1995.
[RFC4750] Joyal, D., Galecki, P., Giacalone, S., Coltun, R., and F.
Baker, "OSPF Version 2 Management Information Base",
RFC 4750, December 2006.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Structure of Management Information
Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Textual Conventions for SMIv2",
STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Conformance Statements for SMIv2", STD 58, RFC 2580,
April 1999.
[RFC2629] Rose, M., "Writing I-Ds and RFCs using XML", RFC 2629,
June 1999.
[RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group
MIB", RFC 2863, June 2000.
7.2. Informative References
[RFC4915] Psenak, P., Mirtorabi, S., Roy, A., Nguyen, L., and P.
Pillay-Esnault, "Multi-Topology (MT) Routing in OSPF",
RFC 4915, June 2007.
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002.
Rawat, et al. Expires May 15, 2009 [Page 27]
Internet-Draft OSPFv2 MT MIB November 2008
Appendix A. IANA Considerations
IANA is requested to make a MIB OID assignment for the OSPFv2-MT-MIB
module under the appropriate subtree.
Appendix B. Security Considerations
There are many management objects defined in these MIB modules with a
MAX-ACCESS clause of read-write and/or read-create. Such objects may
be considered sensitive or vulnerable in some network environments.
The support for SET operations in a non-secure environment without
proper protection can have a negative effect on network operations.
SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPSec),
even then, there is no control as to who on the secure network is
allowed to access and GET/SET (read/change/create/delete) the objects
in this MIB module.
It is RECOMMENDED that implementors consider the security features as
provided by the SNMPv3 framework (see [RFC3410], section 8),
including full support for the SNMPv3 cryptographic mechanisms (for
authentication and privacy).
Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them.
Authors' Addresses
Namita Rawat
Cisco Systems
510 McCarthy Blvd.
Milpitas, CA
USA
EMail: nrawat@cisco.com
Rawat, et al. Expires May 15, 2009 [Page 28]
Internet-Draft OSPFv2 MT MIB November 2008
Rashmi Shrivastava
Cisco Systems
510 McCarthy Blvd.
Milpitas, CA
USA
EMail: rashi@cisco.com
David M. Kushi
F5
401 Elliot Avenue W.
Seattle, WA
USA
EMail: d.kushi@f5.com
Rawat, et al. Expires May 15, 2009 [Page 29]
Internet-Draft OSPFv2 MT MIB November 2008
Full Copyright Statement
Copyright (C) The IETF Trust (2008).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Rawat, et al. Expires May 15, 2009 [Page 30]
| PAFTECH AB 2003-2026 | 2026-04-24 06:22:01 |