One document matched: draft-ietf-idr-bgp4-mibv2-05.txt
Differences from draft-ietf-idr-bgp4-mibv2-04.txt
Inter-Domain Routing Working Group J. Haas
Internet Draft NextHop
S. Hares
NextHop
W. Tackabury
Gold Wire Technology
July 13, 2005
Definitions of Managed Objects
for the Fourth Version of Border Gateway Protocol (BGP-4),
Second Version
<draft-ietf-idr-bgp4-mibv2-05.txt>
Status of this Memo
This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference mate-
rial or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Various Authors Expires January 12, 2006 [Page 1]
Internet Draft BGP-MIB v2 July 13, 2005
Copyright Notice
Copyright (C) The Internet Society (2005). All Rights Reserved.
Abstract
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in TCP/IP-based internets.
In particular, this MIB defines objects that facilitate the manage-
ment of the Border Gateway Protocol Version 4 (BGP4).
Distribution of this memo is unlimited.
1. Introduction
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
In particular, it describes managed objects used for managing the
Border Gateway Protocol Version 4.
The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
2. Objectives
This MIB Module is meant to broadly update and replace a prior MIB
Module defined in RFC 1657 [RFC1657]. Additionally, there is another
effort underway to address very specific limited objectives in updat-
ing points in the RFC 1657 object definition and managed object
attributes [MIB-DRAFT]. The MIB Module described herein is intended
to fully serve the functions and scope of RFC 1657 and these RFC 1657
updates.
Various Authors Expires January 12, 2006 [Page 2]
Internet Draft BGP-MIB v2 July 13, 2005
2.1. Protocol Extensions
Additionally, however, there are a number of ways in which the BGP
Protocol has been enhanced through its ability for added capabili-
ties. Implementations of those capabilities have not been able to
have any management capabilities present in RFC 1657-compliant MIB
module agents, since the capabilities themselves postdated the adop-
tion of RFC 1657. For several significant capabilities, in the form
of BGP Communities [RFC1997], Autonomous System Confederation
[RFC3065] , BGP Multiprotocol Extensions [RFC2858], and Route Reflec-
tion [RFC2796], the MIB Module defined in this document exposes
object types to manage those extended capabilities and their opera-
tion.
One of these extensions in particular (the multiprotocol extensions)
requires a thorough redefinition of MIB table row indices from the
RFC 1657 state. This allows transport-independent address indices
consistent with the Address Family Identifier (AFI) and Subsequent
Address Family Identifier (SAFI) mechanisms of that extension.
2.2. Mechanisms for MIB Extensibility
Moreover, the requirement for the incremental update of support for
capabilities such as these begs the issue of placing modular extensi-
bility for protocol extensions within the framework of the MIB
itself. Going forward, it would be very desirable to have attributes
of the MIB structure, and administrative procedures, to allow the
incremental update of the MIB scope to cover any such new protocol
extensions, without requiring a reissue of the entire MIB. In this
sense, we seek to structure the MIB much like the underlying BGP4
itself, allowing capability-by-capability update.
2.3. BGP Configuration
Finally, the definition and adoption of Version 3 of the SNMP has
occurred since the adoption of the RFC 1657 MIB. As a result, the
ability to deploy secure configuration of managed elements via SNMP
in a standardized way has become a reality for managed networks. In
this MIB definition effort, we seek to expose a more thorough capac-
ity for configuration of BGP4 and its capabilities than was present
in RFC 1657 or than was common practice at the time of its adoption.
Various Authors Expires January 12, 2006 [Page 3]
Internet Draft BGP-MIB v2 July 13, 2005
3. MIB Organization
The MIB is broken down into several top level sections. This sec-
tionalization is important to create an organization for extensibil-
ity.
In general, a top level section of the MIB module will identify some
number of "core" scalar and tabular objects rooted off of it. If
there is sufficient depth within a subsection of one of these top-
level sections, the "core" subdivision off of the top level section
may provide multiple levels to the OBJECT IDENTIFIER scope necessary
to define its management data.
Once this core section is defined, however, each top-level section
has an explicit provision for an 'extensions' section OBJECT IDENTI-
FIER. The intent of the extensions section is to be containment for
discrete per-extension sections. By 'extension' here, we refer to
protocol mechanisms, capabilities, and exchanges which are not
defined in the base Border Gateway Protocol definition, or is not
configuration for protocol operations of similarly 'core' status.
Currently, we propose keying the identification within the per-exten-
sion section in one of two ways.
Where the extension is keyed to a defined capability which has an
associated BGP capability number assigned by IANA (for example, mul-
tiprotocol BGP extensions), the per extension section will be that
defined IANA capability number. Where the extension has management
information suitable for a MIB extension but does not correspond to
an exchanged protocol capability (for example, BGP Route Reflection),
the extension section shall have its final OBJECT IDENTIFIER fragment
correspond to the RFC number which first uniquely defined the exten-
sion (i.e., not requiring renumbering at the time a defining RFC for
a protocol mechanism is outdated by a later RFC).
3.1. bgpM2BaseScalars
The bgpM2BaseScalars section (and corresponding OBJECT IDENTIFIER) is
used to delineate object types used for basic management and monitor-
ing of the protocol implementation. These are core parameters for
the local configuration. While notifications are designed to be
extensible into any other section in the MIB module, the currently
defined traps are located here, in a subsection 'bgpM2BaseNotifica-
tions'. This is rooted at index level zero (0) here, owing to con-
ventions established in [RFC2576].
Support for multiple concurrently supported versions of BGP is
exposed through the entries of the bgpM2VersionTable. Similarly,
Various Authors Expires January 12, 2006 [Page 4]
Internet Draft BGP-MIB v2 July 13, 2005
support for multiple capabilities and authentication mechanisms, as
identified by their assigned numbers, are reported in the bgpM2Sup-
portedCapabilitiesTable and bgpM2SupportedAuthTable respectively.
In the MIB document, there are currently scalar extension mechanisms
to allow the agent to report membership of a local BGP Confederation
[RFC3065] or Route Reflection Cluster ID [RFC2796], as well as
whether these capabilities are in fact supported by the implementa-
tion. These are consistent with the non-capability based extension
section indexing guidelines as presented above.
bgpM2BaseScalars also is the root for a subsection, bgpM2BaseScalar-
Configuration, which contains the companion configuration objects for
the base scalar objects delineated in the preceding paragraphs.
These are presented as a series of scalar read-write objects, with a
single OBJECT-TYPE of syntax StorageType to designate the persistence
of the instance value data for these configuration scalars.
3.2. bgpM2PeerData
The bgpM2PeerData section is per-peer object type definitions. The
predominant table of read-only STATUS object types in that section
(bgpM2PeerTable) describes the session, negotiation state, and
authentication state on a per peer basis. A second table (bgpM2Pre-
fixCountersTable) exposes information about individual route prefixes
received over each peer session. A separate subsection and its sub-
ordinate table (bgpM2PeerErrorsTable) reports information about the
last error encountered on a given peering session.
Further subsections report authentication state with the peer, peer-
ing session detected errors, and elapsed time it has taken to
advance the peering session into various states defined in the proto-
col FSM.
The bgpM2PeerConfiguredTimersTable reports and allows dynamic reset
of key timers on the peer session. These currently allow reset of
hold time and keepalive timer, for compatibility with the same capa-
bilities in RFC 1657 [RFC1657]. For these resettable timers, their
end-to-end negotiated current values are reflected in the
bgpM2PeerNegotiatedTimersTable.
As currently defined, these tables describing authentication, error
state, and timer values (in addition to the configuration tables for
session timers) are tightly coupled enough to the logical per-row
view exposed in the bgpM2PeerTable row entries on a session that
these subordinate "tables" are defined as AUGMENTing the
bgpM2PeerTable itself. The other primary design criterion behind
Various Authors Expires January 12, 2006 [Page 5]
Internet Draft BGP-MIB v2 July 13, 2005
this decision is that using this AUGMENTation does not increase the
per-row-data requirements of bgpM2PeerTable instance retrieval so as
to make such per-row retrieval unwieldy for the management applica-
tion.
3.2.1. bgpM2PeerCapabilities
bgpM2PeerCapabilitiesData has objects and tables to describe BGP
capabilities locally supported, and those reported and negotiated
over each peer session. For tables supporting each of these capa-
bility sets, capability code and data value are provided. Attention
must be given to the fact that multiple instances of a given capabil-
ity can be transmitted between BGP speakers.
3.2.2. bgpM2PeerCounters
The bgpM2CountersTable and bgpM2PrefixCountersTable report protocol
exchanges/FSM transitions, and discrete number of NLRIs exchanged per
peering session, respectively. This is independent of actual
exchanged path attributes, which are tabularized later in the MIB
module. Note that session transitions as reflected in changes of
instances within this table may also be reflected in issuance of
bgpM2Established and bgpM2BackwardTransition NOTIFICATION-TYPE PDUs.
3.2.3. Peering Data Extensions
Route reflector status on a per-peer basis (whether the peer is a
client or nonClient of the local BGP router's reflected route propa-
gation), and peer confederation membership is reported in non capa-
bility extensions of the peering data section.
3.2.4. Configuring Peering Sessions
The MIB has several tables indexed on a per-peer level of granularity
to control creation and activation of new peering sessions, and to
allow control on running sessions (those reflected in bgpM2PeerTable
row instances) regardless of what caused their creation in the BGP
routing process.
The bgpM2CfgPeerAdminStatusTable allows creation and specification of
a row by a bgpM2PeerIndex value (which is how its associated row
instance is identified in the bgpM2PeerTable). For each such row
instance, the set of the bgpM2CfgPeerAdminStatus OBJECT-TYPE of MAX-
ACCESS read-write can allow management application start and stop of
the session.
Various Authors Expires January 12, 2006 [Page 6]
Internet Draft BGP-MIB v2 July 13, 2005
This is contrasted with the function of the bgpM2CfgPeerTable, and
its related AUGMENTed tables bgpM2CfgPeerTimersTable and bgpM2Cfg-
PeerAuthTable. These are used to facilitate direct creation of peer-
ing sessions by the management application. The function of columnar
OBJECT-TYPEs within the bgpM2CfgPeerTable for local and remote
address, version negotiation, and various row-administrative
attributes (RowStatus and StorageType SYNTAXes) are straightforward
enough. The only subtlety with respect to how peering sessions are
activated from usage of this table, and how the activated sessions
are reflected through their bgpM2PeerTable and bgpM2CfgPeerAdminSta-
tusTable entries, is in the usage of the bgpM2CfgPeerTable columnar
object bgpM2CfgPeerStatus. bgpM2CfgPeerStatus can take on two val-
ues. When a peering session, as reflected through its row instance
in the bgpM2CfgPeerTable, has the bgpM2CfgPeerStatus instance value
in that row set to running(2) at the time of the SYNTAX RowStatus
object instance of bgpM2CfgPeerRowEntryStatus set to active(1), the
peering session will in fact be activated in the BGP routing process
(in addition to having its row instance created in the bgpM2Cfg-
PeerTable and bgpM2CfgPeerAdminStatusTable). In this case, the asso-
ciated row of the bgpM2CfgPeerAdminStatusTable row bgpM2CfgPeerAdmin-
Status instance would have the value of start(2). If, in the prior
example, the bgpM2CfgPeerStatus is halted(1) at the time of the
bgpM2CfgPeerRowEntryStatus instance set to active(1), only the peer-
ing table entries would be created at this time of activation, with-
out the peering session being automatically started. The bgpM2Cfg-
PeerAdminStatusTable row bgpM2CfgPeerAdminStatus instance associated
with the session would in this case reflect a value of stop(1).
Since the row entries of the per-peer configuration tables which AUG-
MENT the bgpM2CfgPeerTable logically fate-share the row instances in
the bgpM2CfgPeerTable which they are AUGMENTing, they also share the
same StorageType and RowStatus SYNTAX object sense of the bgpM2Cfg-
PeerTable rows which they augment.
3.3. BGP Routing Information Base Data
An important table for providing index information for other tables
in the MIB module is the bgpM2NlriTable. This discriminates on a
given network prefix (by AFI/SAFI), and the peer which advertised the
prefix (since it can be heard of from multiple speakers). The
bgpM2PathAttrIndex column which identifies each row in this table is
used as an index for other per-attribute tables through the remainder
of the MIB module.
RFC 3107 [RFC3107] specifies a capability for exchanged routes
between BGP peers to attach attribute information to a route indicat-
ing, specifically, related MPLS label path information. The MIB sup-
ports the presentation of this attribute information by generalizing
Various Authors Expires January 12, 2006 [Page 7]
Internet Draft BGP-MIB v2 July 13, 2005
how these attributes are presented to accommodate further extensions
of this particular type. Within a given bgpM2NlriTable entry, we
speak of attribute data of this type as being 'opaque' to BGP, and
use the columnar OBJECT-TYPEs bgpM2NlriOpaqueType and bgpM2Nlri-
OpaquePointer to refer to it. In the case of the RFC 3107 MPLS label
encoding (which is the only usage of these columnar fields in the
bgpM2NlriTable right now), a MPLS label stack would be referenced by
bgpM2NlriOpaquePointer by its per-NLRI instance pointing to a row
instance in the MPLS LSR MIB mplsLabelStackTable, and the bgpM2Nlri-
OpaqueType instance having a value of bgpMplsLabelStack(1).
The bgpM2AdjRibsOutTable row entries reflect data on routes which
have been placed, per peering session, in the Adj-Rib-Out for adver-
tisement to the associated peer.
The bgpM2PathAttrTable provides discrete BGP NLRI attributes which
were received with the advertisement of the prefix by its advertising
peer. Specific information about the autonomous system path (AS
Path) advertised with the NLRI, on a per AS value, is to be found in
the bgpM2AsPathTable.
Finally, where attributes which were unable to be reported in the
bgpM2PathAttrTable, the AS Path table, or any defined per-NLRI tables
in the agent were received with the prefix, those attributes are
reported via the bgpM2PathAttrUnknownTable. Short of advertised
attribute type, no semantic breakdown of the unknown attribute data
is provided. That data is only available as a raw OCTET STRING in
the bgpM2PathAttrUnknownValue column of this table.
3.3.1. Routing Information Base Extensions
There are two extension sections and five subordinate tables to the
bgpM2PathAttrTable and RIB data OBJECT IDENTIFIER-delimited MIB mod-
ule section. The bgpM2PathAttrRouteReflectionExts and its contained
bgpM2PathAttrOriginatorIdTable report on the originating route
reflector. The bgpM2PathAttrClusterTable specifically reports on the
reflection route a NLRI has traversed to get to the local BGP routing
process.
The bgpM2PathAttrCommunityExts section deals with extended and non-
extended communities for network routes. The bgpM2PathAttrCommTable
bgpM2PathAttrExtCommTable contained herein report community member-
ship (if any) on a per network-prefix basis.
Various Authors Expires January 12, 2006 [Page 8]
Internet Draft BGP-MIB v2 July 13, 2005
3.4. Consideration On Table Indexing
There are certain efficiency concerns for row index management for
management applications which are useful to take into consideration,
given the nature of some of the tables implied in the preceding sec-
tion.
In the first place, it is valuable to exploit the direct relationship
of entries in, for example, the bgpM2PrefixCountersTable as they
relate to the entry in the bgpM2PeerTable to which they are related.
More compelling is the example case of the one-to-many relationship
between a row entry in the bgpM2PeerTable and the bgpM2PathAttrTable,
the latter of which maintains per-row entries for potentially many
NLRIs as received from a peer in a BGP UPDATE message. From the
point of view of normalizing these relationships, it would be useful
to have a direct reference to the "governing" bgpM2PeerTable row
entry for the peer which is a "dependency" for the subordinate table
row entry for other peer data.
Second, the nature of protocol-independent addressing makes the
indexing of these entries indirectly even more compelling. Even
accounting for the addressing requirements of IPv6 and the provision
of AFI and SAFI qualifiers, the logical addressing of a row in the
bgpPathAttrClusterTable (for example) would extend out some 50 bytes
if there was no direct index linkage to the "governing" bgpPathAt-
trTable, and bgpPeerTable entries.
For this reason, the tables are structured in such a way that, where
there is such a linkage to a "dependent" table (where, for example,
the bgpPrefixCountersTable "depends on" the bgpPeerTable), a table
will contain a per-row numeric index (e.g., bgpPeerIndex), which the
"dependent" table will use as one of its own row index values. These
indices are manufactured by the agent, and are otherwise opaque to
the management application (or, for that matter, even to the organi-
zation of the "dependent" table[s]).
Where considerations of per-row retrieval overhead (in terms of typi-
cal row instance data size, as a function of liability to have a sin-
gle row retrieval exceed PDU size, for example), and those of general
logical data organization permit, certain tables logically at the
sub-peering-session level have been specified as AUGMENTing the pri-
mary tables (bgpM2PeerTable and bgpM2CfgPeerTable) to which those
sub-peering-session row entries relate. This is to facilitate ease
on the part of a management application of assembling (for example,
via GET-BULK operations across a lexicographically contiguous row
scope) a management image of control information on a given peering
session.
Various Authors Expires January 12, 2006 [Page 9]
Internet Draft BGP-MIB v2 July 13, 2005
4. Definitions
BGP4-V2-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Gauge32, mib-2, Unsigned32, Integer32,
TimeTicks
FROM SNMPv2-SMI
InetAddressType, InetAddress, InetPortNumber,
InetAutonomousSystemNumber, InetAddressPrefixLength
FROM INET-ADDRESS-MIB
TEXTUAL-CONVENTION, TruthValue, RowPointer, StorageType,
RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB;
bgpM2 MODULE-IDENTITY
LAST-UPDATED "200507130000Z"
ORGANIZATION "IETF IDR Working Group"
CONTACT-INFO "E-mail: idr@merit.net
Jeffrey Haas (Editor)
825 Victors Way, Suite 100
Ann Arbor, MI 48108
Tel: +1 734 222-1600
Fax: +1 734 222-1602
E-mail: jhaas@nexthop.com"
DESCRIPTION
"This MIB module defines management objects for
the Border Gateway Protocol, Version 4."
::= { mib-2 XXX }
-- RFC Ed.: replace XXX with IANA-assigned number & remove this note
BgpM2Identifier ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1d."
STATUS current
DESCRIPTION
"The representation of a BGP Identifier. The BGP
Identifier should be represented in the OCTET STRING
as with the first OCTET of the string containing
the first OCTET of the BGP Identifier received or sent
in the OPEN packet and so on.
Various Authors Expires January 12, 2006 [Page 10]
Internet Draft BGP-MIB v2 July 13, 2005
Even though the BGP Identifier is trending away from
an IP address it is still displayed as if it was one,
even when it would be an illegal IP address."
SYNTAX OCTET STRING(SIZE (4))
BgpM2Afi ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The representation of a BGP AFI"
SYNTAX Unsigned32(0..65535)
BgpM2Safi ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The representation of a BGP SAFI"
SYNTAX Unsigned32(0..255)
BgpM2Community ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2d:"
STATUS current
DESCRIPTION
"The representation of a BGP Community."
SYNTAX OCTET STRING(SIZE(4))
BgpM2ExtendedCommunity ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x:"
STATUS current
DESCRIPTION
"The representation of a BGP Extended Community."
SYNTAX OCTET STRING(SIZE(8))
bgpM2BaseScalars
OBJECT IDENTIFIER ::= { bgpM2 1 }
--
-- Notifications
--
bgpM2BaseNotifications
OBJECT IDENTIFIER ::= { bgpM2BaseScalars 0 }
Various Authors Expires January 12, 2006 [Page 11]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2Established NOTIFICATION-TYPE
OBJECTS {
bgpM2PeerLocalAddrType,
bgpM2PeerLocalAddr,
bgpM2PeerRemoteAddrType,
bgpM2PeerRemoteAddr,
bgpM2PeerLastErrorReceived,
bgpM2PeerState
}
STATUS current
DESCRIPTION
"The BGP Established event is generated when
the BGP FSM enters the ESTABLISHED state."
::= { bgpM2BaseNotifications 1 }
bgpM2BackwardTransition NOTIFICATION-TYPE
OBJECTS {
bgpM2PeerLocalAddrType,
bgpM2PeerLocalAddr,
bgpM2PeerRemoteAddrType,
bgpM2PeerRemoteAddr,
bgpM2PeerLastErrorReceived,
bgpM2PeerLastErrorReceivedText,
bgpM2PeerState
}
STATUS current
DESCRIPTION
"The BGPBackwardTransition Event is generated
when the BGP FSM moves from a higher numbered
state to a lower numbered state."
::= { bgpM2BaseNotifications 2 }
--
-- BGP Supported Version Table
--
bgpM2Version
OBJECT IDENTIFIER ::= { bgpM2BaseScalars 1 }
bgpM2VersionTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2VersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of supported BGP versions."
Various Authors Expires January 12, 2006 [Page 12]
Internet Draft BGP-MIB v2 July 13, 2005
::= { bgpM2Version 1 }
bgpM2VersionEntry OBJECT-TYPE
SYNTAX BgpM2VersionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing data on a given supported version
of the Border Gateway Protocol and the level of
support provided. It is expected that any agent
implementation supporting this MIB module will
report support for Version 4 of the Border Gateway
Protocol at the very minimum."
INDEX {
bgpM2VersionIndex
}
::= { bgpM2VersionTable 1 }
BgpM2VersionEntry ::= SEQUENCE {
bgpM2VersionIndex
Unsigned32,
bgpM2VersionSupported
TruthValue
}
bgpM2VersionIndex OBJECT-TYPE
SYNTAX Unsigned32(0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version number of the BGP Protocol."
::= { bgpM2VersionEntry 1 }
bgpM2VersionSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is TRUE if this version of the BGP protocol
identified in 'bgpM2VersionIndex' is supported. The absence
of a row for a particular bgpM2VersionIndex indicates that
that bgpM2VersionIndex protocol version number is not
supported."
::= { bgpM2VersionEntry 2 }
Various Authors Expires January 12, 2006 [Page 13]
Internet Draft BGP-MIB v2 July 13, 2005
--
-- Supported BGP Capabilities
--
bgpM2SupportedCapabilities
OBJECT IDENTIFIER ::= { bgpM2BaseScalars 2 }
bgpM2CapabilitySupportAvailable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is TRUE if capability support is
available and is enabled."
::= { bgpM2SupportedCapabilities 1 }
bgpM2SupportedCapabilitiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2SupportedCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of supported BGP-4 capabilities."
::= { bgpM2SupportedCapabilities 2 }
bgpM2SupportedCapabilitiesEntry OBJECT-TYPE
SYNTAX BgpM2SupportedCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about supported capabilities indexed
by capability number."
INDEX {
bgpM2SupportedCapabilityCode
}
::= { bgpM2SupportedCapabilitiesTable 1 }
BgpM2SupportedCapabilityEntry ::= SEQUENCE {
bgpM2SupportedCapabilityCode
Unsigned32,
bgpM2SupportedCapability
TruthValue
}
Various Authors Expires January 12, 2006 [Page 14]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2SupportedCapabilityCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of supported capability. The index directly
corresponds with the BGP-4 Capability Advertisement
Capability Code."
::= { bgpM2SupportedCapabilitiesEntry 1 }
bgpM2SupportedCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is True if this capability is supported,
False otherwise."
::= { bgpM2SupportedCapabilitiesEntry 2 }
--
-- Base Scalars
--
bgpM2AsSize OBJECT-TYPE
SYNTAX INTEGER {
twoOctet(1),
fourOctet(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the AS value in this implementation.
The semantics of this are determined as per the
as-4bytes draft."
REFERENCE
"draft-ietf-idr-as4bytes-04"
::= { bgpM2BaseScalars 4 }
bgpM2LocalAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Various Authors Expires January 12, 2006 [Page 15]
Internet Draft BGP-MIB v2 July 13, 2005
"The local autonomous system number.
If the bgpM2AsSize is twoOctet, then the range is
constrained to be 0-65535."
::= { bgpM2BaseScalars 5 }
bgpM2LocalIdentifier OBJECT-TYPE
SYNTAX BgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Identifier of local system.
Current practice is trending away from this value being
treated as an IP address and more as a generic
identifier."
::= { bgpM2BaseScalars 6 }
--
-- Base Scalar Extensions
--
bgpM2BaseScalarExtensions
OBJECT IDENTIFIER ::= { bgpM2BaseScalars 7 }
bgpM2BaseScalarNonCapExts
OBJECT IDENTIFIER ::= { bgpM2BaseScalarExtensions 1 }
bgpM2BaseScalarCapExts
OBJECT IDENTIFIER ::= { bgpM2BaseScalarExtensions 2 }
--
-- Base Scalar Route Reflection Extensions
--
bgpM2BaseScalarRouteReflectExts OBJECT IDENTIFIER ::=
{ bgpM2BaseScalarNonCapExts 2796 }
bgpM2RouteReflector OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
Various Authors Expires January 12, 2006 [Page 16]
Internet Draft BGP-MIB v2 July 13, 2005
DESCRIPTION
"This value is TRUE if this implementation supports the
BGP Route Reflection Extension and is enabled as a
route reflector. If the BGP Route Reflection extension
is not supported this value must be FALSE."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { bgpM2BaseScalarRouteReflectExts 1 }
bgpM2ClusterId OBJECT-TYPE
SYNTAX BgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured Cluster-ID of the BGP Speaker. This will
default to the BGP Speaker's BgpM2Identifier if this
speaker is functioning as a route reflector and an
explicit Cluster-ID has not been configured.
A value of 0.0.0.0 will be present if Route Reflection is
not enabled."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { bgpM2BaseScalarRouteReflectExts 2 }
--
-- Base Scalar AS Confederation Extensions
--
bgpM2BaseScalarASConfedExts OBJECT IDENTIFIER ::=
{ bgpM2BaseScalarNonCapExts 3065 }
bgpM2ConfederationRouter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is TRUE if this implementation supports the
BGP AS Confederations Extension and this router is
configured to be in a confederation."
REFERENCE
"RFC 3065 - Autonomous System Confederations for BGP"
::= { bgpM2BaseScalarASConfedExts 1 }
Various Authors Expires January 12, 2006 [Page 17]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2ConfederationId OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local Confederation Identification Number.
This value will be zero (0) if this BGP Speaker is not
a confederation router."
REFERENCE
"RFC 3065 - Autonomous System Confederations for BGP"
::= { bgpM2BaseScalarASConfedExts 2 }
--
-- Base Configuration Objects
--
bgpM2BaseScalarConfiguration
OBJECT IDENTIFIER ::= { bgpM2BaseScalars 8 }
bgpM2CfgBaseScalarStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the intended storage type for
all configurable base scalars."
::= { bgpM2BaseScalarConfiguration 1 }
bgpM2CfgLocalAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local autonomous system number.
If the bgpM2AsSize is twoOctet, then the range is
constrained to be 0-65535."
::= { bgpM2BaseScalarConfiguration 2 }
bgpM2CfgLocalIdentifier OBJECT-TYPE
SYNTAX BgpM2Identifier
MAX-ACCESS read-write
STATUS current
Various Authors Expires January 12, 2006 [Page 18]
Internet Draft BGP-MIB v2 July 13, 2005
DESCRIPTION
"The BGP Identifier of local system.
Current practice is trending away from this value being
treated as an IP address and more as a generic
identifier."
::= { bgpM2BaseScalarConfiguration 3 }
--
-- Base Scalar Extensions
--
bgpM2CfgBaseScalarExtensions
OBJECT IDENTIFIER ::= { bgpM2BaseScalarConfiguration 4 }
bgpM2CfgBaseScalarNonCapExts
OBJECT IDENTIFIER ::= { bgpM2CfgBaseScalarExtensions 1 }
bgpM2CfgBaseScalarCapExts
OBJECT IDENTIFIER ::= { bgpM2CfgBaseScalarExtensions 2 }
--
-- Base Scalar Route Reflection Extensions
--
bgpM2CfgBaseScalarReflectorExts
OBJECT IDENTIFIER ::= { bgpM2CfgBaseScalarNonCapExts 2796 }
bgpM2CfgRouteReflector OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is set to true if this implementation will
be supporting route reflection."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { bgpM2CfgBaseScalarReflectorExts 1 }
bgpM2CfgClusterId OBJECT-TYPE
SYNTAX BgpM2Identifier
MAX-ACCESS read-write
Various Authors Expires January 12, 2006 [Page 19]
Internet Draft BGP-MIB v2 July 13, 2005
STATUS current
DESCRIPTION
"The configured Cluster-ID of the BGP Speaker. This will
default to the BGP Speaker's BgpM2Identifier if this
speaker is functioning as a route reflector and an
explicit Cluster-ID has not been configured.
A value of 0.0.0.0 will be present if Route Reflection is
not enabled."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { bgpM2CfgBaseScalarReflectorExts 2 }
--
-- Base Scalar AS Confederation Extensions
--
bgpM2CfgBaseScalarASConfedExts
OBJECT IDENTIFIER ::= { bgpM2CfgBaseScalarNonCapExts 3065 }
bgpM2CfgConfederationRouter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value is set to true if this implementation will be
supporting BGP AS Confederations."
REFERENCE
"RFC 3065 - Autonomous System Confederations for BGP"
::= { bgpM2CfgBaseScalarASConfedExts 1 }
bgpM2CfgConfederationId OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The local Confederation Identification Number.
This value will be zero (0) if this BGP Speaker is not
a confederation router."
REFERENCE
"RFC 3065 - Autonomous System Confederations for BGP"
::= { bgpM2CfgBaseScalarASConfedExts 2 }
Various Authors Expires January 12, 2006 [Page 20]
Internet Draft BGP-MIB v2 July 13, 2005
--
-- BGP Peer Data
--
bgpM2Peer
OBJECT IDENTIFIER ::= { bgpM2 2 }
bgpM2PeerData
OBJECT IDENTIFIER ::= { bgpM2Peer 1 }
bgpM2PeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2PeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP peer table.
This table contains, one entry per remote BGP peer,
any information about the connections with the remote
BGP peers."
::= { bgpM2PeerData 1 }
bgpM2PeerEntry OBJECT-TYPE
SYNTAX BgpM2PeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the connection with
a remote BGP peer."
INDEX {
bgpM2PeerInstance,
bgpM2PeerLocalAddrType,
bgpM2PeerLocalAddr,
bgpM2PeerRemoteAddrType,
bgpM2PeerRemoteAddr
}
::= { bgpM2PeerTable 1 }
BgpM2PeerEntry ::= SEQUENCE {
bgpM2PeerInstance
Unsigned32,
bgpM2PeerIdentifier
BgpM2Identifier,
bgpM2PeerState
Various Authors Expires January 12, 2006 [Page 21]
Internet Draft BGP-MIB v2 July 13, 2005
INTEGER,
bgpM2PeerStatus
INTEGER,
bgpM2PeerConfiguredVersion
Unsigned32,
bgpM2PeerNegotiatedVersion
Unsigned32,
bgpM2PeerLocalAddrType
InetAddressType,
bgpM2PeerLocalAddr
InetAddress,
bgpM2PeerLocalPort
InetPortNumber,
bgpM2PeerLocalAs
InetAutonomousSystemNumber,
bgpM2PeerRemoteAddrType
InetAddressType,
bgpM2PeerRemoteAddr
InetAddress,
bgpM2PeerRemotePort
InetPortNumber,
bgpM2PeerRemoteAs
InetAutonomousSystemNumber,
bgpM2PeerIndex
Unsigned32
}
bgpM2PeerInstance OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing instance index.
Some BGP implementations permit the creation of
multiple instances of a BGP routing process. An
example includes RFC 2547 PE-CE routers.
Implementations that do not support multiple
routing instances should return 1 for this object.
XXX TODO - We need to provide a way to configure these
in the peer configuration table."
::= { bgpM2PeerEntry 1 }
bgpM2PeerIdentifier OBJECT-TYPE
Various Authors Expires January 12, 2006 [Page 22]
Internet Draft BGP-MIB v2 July 13, 2005
SYNTAX BgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Identifier of this entry's remote BGP peer.
This entry should be 0.0.0.0 unless the bgpM2PeerState is
in the OpenConfirm or the Established state."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 4.2"
::= { bgpM2PeerEntry 2 }
bgpM2PeerState OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
connect(2),
active(3),
opensent(4),
openconfirm(5),
established(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote BGP peer's FSM state."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 8"
::= { bgpM2PeerEntry 3 }
bgpM2PeerStatus OBJECT-TYPE
SYNTAX INTEGER {
halted(1),
running(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not the BGP FSM for this remote peer is halted
or running. The BGP FSM for a remote peer is halted after
processing a Stop event. Likewise, it is in the running
state after a Start event.
The bgpM2PeerState will generally be in the idle state when
the FSM is halted, although some extensions such as
Graceful Restart will leave the peer in the Idle state
but with the FSM running."
Various Authors Expires January 12, 2006 [Page 23]
Internet Draft BGP-MIB v2 July 13, 2005
::= { bgpM2PeerEntry 4 }
bgpM2PeerConfiguredVersion OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured version to originally start with this
remote peer. The BGP speaker may permit negotiation to a
lower version number of the protocol."
::= { bgpM2PeerEntry 5 }
bgpM2PeerNegotiatedVersion OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated version of BGP running between the two
peers."
::= { bgpM2PeerEntry 6 }
bgpM2PeerLocalAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address family of the local end of the peering
session."
::= { bgpM2PeerEntry 7 }
bgpM2PeerLocalAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the local end of the peering session."
::= { bgpM2PeerEntry 8 }
bgpM2PeerLocalPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Various Authors Expires January 12, 2006 [Page 24]
Internet Draft BGP-MIB v2 July 13, 2005
"The local port for the TCP connection between the BGP
peers."
::= { bgpM2PeerEntry 9 }
bgpM2PeerLocalAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Some implementations of BGP can represent themselves
as multiple ASs. This is the AS that this peering
session is representing itself as to the remote peer."
::= { bgpM2PeerEntry 10 }
bgpM2PeerRemoteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address family of the remote end of the peering
session."
::= { bgpM2PeerEntry 11 }
bgpM2PeerRemoteAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the remote end of the peering session."
::= { bgpM2PeerEntry 12 }
bgpM2PeerRemotePort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote port for the TCP connection between the BGP
peers. In the case of a transport for which the notion
of 'port' is irrelevant, an instance value of -1
should be returned by the agent for this object.
Note that the objects bgpM2PeerLocalAddr,
bgpM2PeerLocalPort, bgpM2PeerRemoteAddr and
bgpM2PeerRemotePort provide the appropriate reference to
Various Authors Expires January 12, 2006 [Page 25]
Internet Draft BGP-MIB v2 July 13, 2005
the standard MIB TCP connection table. or even the ipv6
TCP MIB as in rfc2452."
REFERENCE
"RFC 2012 - SNMPv2 Management Information Base for the
Transmission Control Protocol using SMIv2.
RFC 2542 - IP Version 6 Management Information Base
for the Transmission Control Protocol."
::= { bgpM2PeerEntry 13 }
bgpM2PeerRemoteAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote autonomous system number."
::= { bgpM2PeerEntry 14 }
bgpM2PeerIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is a unique index for the remote peer entry
in the bgpM2PeerTable. It is assigned by the agent
at the point of creation of the bgpM2PeerTable row
entry. While its value is guaranteed to be unique at
any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of bgpM2PeerIndex row instance values across rows of
the bgpM2PeerTable. It is used to provide an index
structure for other tables whose data is logically
per-peer.
For explicitly configured peers, this value will remain
consistent until this row is deleted by deleting the
configured peers. Unconfigured peers will generate
a monotonically increasing number when a BGP FSM is
built to process the peering session. Values in the
bgpM2PeerTable and other tables utilizing bgpM2PeerIndex
are expected to remain in existence for an arbitrary
time after the unconfigured peer has been deleted
in order to allow management applications to extract
useful management information for those peers. Thus,
an unconfigured peer using the same indices as the
bgpM2PeerTable that comes up while this row still
exists will re-utilize the same row."
Various Authors Expires January 12, 2006 [Page 26]
Internet Draft BGP-MIB v2 July 13, 2005
::= { bgpM2PeerEntry 15 }
--
-- Errors
--
bgpM2PeerErrors
OBJECT IDENTIFIER ::= { bgpM2Peer 2 }
bgpM2PeerErrorsTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2PeerErrorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"On a per peer basis, this table reflects the last
protocol-defined error encountered and reported on
the peer session. If no entry for a given peer,
by its bgpM2PeerIndex, exists in this table, then no
such errors have been observed, reported, and
recorded on the session."
::= { bgpM2PeerErrors 1 }
bgpM2PeerErrorsEntry OBJECT-TYPE
SYNTAX BgpM2PeerErrorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about errors sent
and received for a particular BGP peer."
AUGMENTS {
bgpM2PeerEntry
}
::= { bgpM2PeerErrorsTable 1 }
BgpM2PeerErrorsEntry ::= SEQUENCE {
bgpM2PeerLastErrorReceived
OCTET STRING,
bgpM2PeerLastErrorSent
OCTET STRING,
bgpM2PeerLastErrorReceivedTime
TimeTicks,
bgpM2PeerLastErrorSentTime
TimeTicks,
bgpM2PeerLastErrorReceivedText
SnmpAdminString,
Various Authors Expires January 12, 2006 [Page 27]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2PeerLastErrorSentText
SnmpAdminString,
bgpM2PeerLastErrorReceivedData
OCTET STRING,
bgpM2PeerLastErrorSentData
OCTET STRING
}
bgpM2PeerLastErrorReceived OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code and subcode received by this BGP
Speaker via a NOTIFICATION message for this peer.
If no error has occurred, this field is zero.
Otherwise, the first byte of this two byte
OCTET STRING contains the error code, and the second
byte contains the subcode."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { bgpM2PeerErrorsEntry 1 }
bgpM2PeerLastErrorSent OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code and subcode sent by this BGP
Speaker via a NOTIFICATION message to this peer.
If no error has occurred, this field is zero.
Otherwise, the first byte of this two byte
OCTET STRING contains the error code, and the second
byte contains the subcode."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { bgpM2PeerErrorsEntry 2 }
bgpM2PeerLastErrorReceivedTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp that the last NOTIFICATION was received from
this peer."
Various Authors Expires January 12, 2006 [Page 28]
Internet Draft BGP-MIB v2 July 13, 2005
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { bgpM2PeerErrorsEntry 3 }
bgpM2PeerLastErrorSentTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp that the last NOTIFICATION was sent to
this peer."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { bgpM2PeerErrorsEntry 4 }
bgpM2PeerLastErrorReceivedText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an implementation specific
explanation of the error that was reported."
::= { bgpM2PeerErrorsEntry 5 }
bgpM2PeerLastErrorSentText OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an implementation specific
explanation of the error that is being reported."
::= { bgpM2PeerErrorsEntry 6 }
bgpM2PeerLastErrorReceivedData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4075))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code's data seen by this peer."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { bgpM2PeerErrorsEntry 7 }
Various Authors Expires January 12, 2006 [Page 29]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2PeerLastErrorSentData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4075))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code's data sent to this peer."
REFERENCE
"draft-ietf-idr-bgp4-15.txt, Sec. 4.5"
::= { bgpM2PeerErrorsEntry 8 }
--
-- Peer Event Times
--
bgpM2PeerTimers
OBJECT IDENTIFIER ::= { bgpM2Peer 3 }
bgpM2PeerEventTimesTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2PeerEventTimesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table reporting the per-peering session amount
of time elapsed and update events since the peering
session advanced into the Established state."
::= { bgpM2PeerTimers 1 }
bgpM2PeerEventTimesEntry OBJECT-TYPE
SYNTAX BgpM2PeerEventTimesEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains a set of statistics about time
spent and events encountered in the peer session
Established state."
AUGMENTS {
bgpM2PeerEntry
}
::= { bgpM2PeerEventTimesTable 1 }
BgpM2PeerEventTimesEntry ::= SEQUENCE {
bgpM2PeerFsmEstablishedTime
Gauge32,
bgpM2PeerInUpdatesElapsedTime
Various Authors Expires January 12, 2006 [Page 30]
Internet Draft BGP-MIB v2 July 13, 2005
Gauge32
}
bgpM2PeerFsmEstablishedTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This timer indicates how long (in seconds) this
peer has been in the Established state or how long
since this peer was last in the Established state.
It is set to zero when a new peer is configured or
the router is booted."
::= { bgpM2PeerEventTimesEntry 1 }
bgpM2PeerInUpdatesElapsedTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Elapsed time in seconds since the last BGP UPDATE
message was received from the peer. Each time
bgpM2PeerInUpdates is incremented, the value of this
object is set to zero (0). This value shall also be
zero (0) when the peer is not in the Established state"
::= { bgpM2PeerEventTimesEntry 2 }
--
-- Peer Configured Timers
--
bgpM2PeerConfiguredTimersTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2PeerConfiguredTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Per peer management data on BGP session timers."
::= { bgpM2PeerTimers 2 }
bgpM2PeerConfiguredTimersEntry OBJECT-TYPE
SYNTAX BgpM2PeerConfiguredTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry corresponds to the current state of
Various Authors Expires January 12, 2006 [Page 31]
Internet Draft BGP-MIB v2 July 13, 2005
BGP timers on a given peering session."
AUGMENTS {
bgpM2PeerEntry
}
::= { bgpM2PeerConfiguredTimersTable 1 }
BgpM2PeerConfiguredTimersEntry ::= SEQUENCE {
bgpM2PeerConnectRetryInterval
Unsigned32,
bgpM2PeerHoldTimeConfigured
Unsigned32,
bgpM2PeerKeepAliveConfigured
Unsigned32,
bgpM2PeerMinASOrigInterval
Unsigned32,
bgpM2PeerMinRouteAdverInterval
Unsigned32
}
bgpM2PeerConnectRetryInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the ConnectRetry
timer. The suggested value for this timer is 120
seconds."
::= { bgpM2PeerConfiguredTimersEntry 1 }
bgpM2PeerHoldTimeConfigured OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 3..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the Hold Time configured
for this BGP speaker with this peer. This value
is placed in an OPEN message sent to this peer by
this BGP speaker, and is compared with the Hold
Time field in an OPEN message received from the
peer when determining the Hold Time (bgpM2PeerHoldTime)
with the peer. This value must not be less than
three seconds if it is not zero (0) in which case
the Hold Time is NOT to be established with the
peer. The suggested value for this timer is 90
seconds."
Various Authors Expires January 12, 2006 [Page 32]
Internet Draft BGP-MIB v2 July 13, 2005
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Appendix 6.4"
::= { bgpM2PeerConfiguredTimersEntry 2 }
bgpM2PeerKeepAliveConfigured OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 1..21845 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the KeepAlive timer
configured for this BGP speaker with this peer.
The value of this object will only determine the
KEEPALIVE messages frequency relative to the value
specified in bgpM2PeerHoldTimeConfigured; the actual
time interval for the KEEPALIVE messages is indicated
by bgpM2PeerKeepAlive. A reasonable maximum value
for this timer would be configured to be one third
of that of bgpM2PeerHoldTimeConfigured.
If the value of this object is zero (0), no
periodical KEEPALIVE messages are sent to the peer
after the BGP connection has been established.
The suggested value for this timer is 30 seconds."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Appendix 6.4"
::= { bgpM2PeerConfiguredTimersEntry 3 }
bgpM2PeerMinASOrigInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the MinASOriginationInterval
timer. The suggested value for this timer is 15
seconds."
::= { bgpM2PeerConfiguredTimersEntry 4 }
bgpM2PeerMinRouteAdverInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the
MinRouteAdvertisementInterval timer. The suggested
value for this timer is 30 seconds."
Various Authors Expires January 12, 2006 [Page 33]
Internet Draft BGP-MIB v2 July 13, 2005
::= { bgpM2PeerConfiguredTimersEntry 5 }
--
-- Peer Negotiated Timers
--
bgpM2PeerNegotiatedTimersTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2PeerNegotiatedTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Current values of per-peer timers which can be
dynamically set in the bgpM2PeerConfiguredTimersTable.
Values reflected in this table are the current
operational values, after negotiation from values
derived from initial configuration or last set from
bgpM2PeerConfiguredTimersTable row instances."
::= { bgpM2PeerTimers 3 }
bgpM2PeerNegotiatedTimersEntry OBJECT-TYPE
SYNTAX BgpM2PeerNegotiatedTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry reflects a value of the currently
operational, negotiated timers as reflected in the
BgpM2PeerNegotiatedTimersEntry."
AUGMENTS {
bgpM2PeerEntry
}
::= { bgpM2PeerNegotiatedTimersTable 1 }
BgpM2PeerNegotiatedTimersEntry ::= SEQUENCE {
bgpM2PeerHoldTime
Unsigned32,
bgpM2PeerKeepAlive
Unsigned32
}
bgpM2PeerHoldTime OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 3..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Various Authors Expires January 12, 2006 [Page 34]
Internet Draft BGP-MIB v2 July 13, 2005
"The value of this object is calculated by this BGP
Speaker as being;
zero (0) - if this was the value sent by the peer and
this value is permitted by this BGP Speaker. In this
case, no keepalive messages are sent and the Hold Timer
is not set.
At least three (3). This value is the smaller of
the value sent by this peer in the OPEN message and
bgpM2PeerHoldTimeConfigured for this peer.
This value is only defined when the peering session is
in the Established state."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 4.2"
::= { bgpM2PeerNegotiatedTimersEntry 1 }
bgpM2PeerKeepAlive OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 1..21845 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval in seconds for the KeepAlive timer
established with the peer. The value of this object
is calculated by this BGP speaker such that, when
compared with bgpM2PeerHoldTime, it has the same
proportion as what bgpM2PeerKeepAliveConfigured has
when compared with bgpM2PeerHoldTimeConfigured. If
the value of this object is zero (0), it indicates
that the KeepAlive timer has not been established
with the peer, or, the value of
bgpM2PeerKeepAliveConfigured is zero (0).
This value is only defined when the peering session is
in the Established state."
REFERENCE
"draft-ietf-idr-bgp4-17, Sec. 4.4"
::= { bgpM2PeerNegotiatedTimersEntry 2 }
--
-- Peer Capabilities
--
bgpM2PeerCapabilities
OBJECT IDENTIFIER ::= { bgpM2Peer 4 }
Various Authors Expires January 12, 2006 [Page 35]
Internet Draft BGP-MIB v2 July 13, 2005
--
-- Announced Capabilities
--
bgpM2PeerCapsAnnouncedTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2PeerCapsAnnouncedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the capabilities
that are supported for a given peer."
::= { bgpM2PeerCapabilities 1 }
bgpM2PeerCapsAnnouncedEntry OBJECT-TYPE
SYNTAX BgpM2PeerCapsAnnouncedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"These entries are keyed by a BGP-4 peer remote
address and the BGP Capability Code"
INDEX {
bgpM2PeerIndex,
bgpM2PeerCapAnnouncedCode,
bgpM2PeerCapAnnouncedIndex
}
::= { bgpM2PeerCapsAnnouncedTable 1 }
BgpM2PeerCapsAnnouncedEntry ::= SEQUENCE {
bgpM2PeerCapAnnouncedCode
Unsigned32,
bgpM2PeerCapAnnouncedIndex
Unsigned32,
bgpM2PeerCapAnnouncedValue
OCTET STRING
}
bgpM2PeerCapAnnouncedCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Capability Advertisement Capability Code."
::= { bgpM2PeerCapsAnnouncedEntry 1 }
Various Authors Expires January 12, 2006 [Page 36]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2PeerCapAnnouncedIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multiple instances of a given capability may be sent
bgp a BGP speaker. This variable is used to index them."
::= { bgpM2PeerCapsAnnouncedEntry 2 }
bgpM2PeerCapAnnouncedValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the announced capability."
::= { bgpM2PeerCapsAnnouncedEntry 3 }
--
-- Received Capabilities
--
bgpM2PeerCapsReceivedTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM24PeerCapsReceivedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the capabilities
that are supported for a given peer."
::= { bgpM2PeerCapabilities 2 }
bgpM2PeerCapsReceivedEntry OBJECT-TYPE
SYNTAX BgpM24PeerCapsReceivedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"These entries are keyed by a BGP-4 peer remote
address and the BGP Capability Code"
INDEX {
bgpM2PeerIndex,
bgpM2PeerCapReceivedCode,
bgpM2PeerCapReceivedIndex
}
::= { bgpM2PeerCapsReceivedTable 1 }
Various Authors Expires January 12, 2006 [Page 37]
Internet Draft BGP-MIB v2 July 13, 2005
BgpM24PeerCapsReceivedEntry ::= SEQUENCE {
bgpM2PeerCapReceivedCode
Unsigned32,
bgpM2PeerCapReceivedIndex
Unsigned32,
bgpM2PeerCapReceivedValue
OCTET STRING
}
bgpM2PeerCapReceivedCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BGP Capability Advertisement Capability Code."
::= { bgpM2PeerCapsReceivedEntry 1 }
bgpM2PeerCapReceivedIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Multiple instances of a given capability may be sent
bgp a BGP speaker. This variable is used to index them."
::= { bgpM2PeerCapsReceivedEntry 2 }
bgpM2PeerCapReceivedValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the announced capability."
::= { bgpM2PeerCapsReceivedEntry 3 }
--
-- Per-peer counters
--
bgpM2PeerCounters
OBJECT IDENTIFIER ::= { bgpM2Peer 6 }
bgpM2PeerCountersTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2PeerCountersEntry
Various Authors Expires January 12, 2006 [Page 38]
Internet Draft BGP-MIB v2 July 13, 2005
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The counters associated with a BGP Peer."
::= { bgpM2PeerCounters 1 }
bgpM2PeerCountersEntry OBJECT-TYPE
SYNTAX BgpM2PeerCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains counters of message transmissions
and FSM transitions for a given BGP Peering session."
AUGMENTS {
bgpM2PeerEntry
}
::= { bgpM2PeerCountersTable 1 }
BgpM2PeerCountersEntry ::= SEQUENCE {
bgpM2PeerInUpdates
Counter32,
bgpM2PeerOutUpdates
Counter32,
bgpM2PeerInTotalMessages
Counter32,
bgpM2PeerOutTotalMessages
Counter32,
bgpM2PeerFsmEstablishedTrans
Counter32
}
-- +++wayne need to describe what happens if connection is broken
-- and then reestablished. Does the prior counter value accumulate?
bgpM2PeerInUpdates OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP UPDATE messages received on this
connection. This object should be initialized to zero
(0) when the connection is established."
::= { bgpM2PeerCountersEntry 1 }
bgpM2PeerOutUpdates OBJECT-TYPE
Various Authors Expires January 12, 2006 [Page 39]
Internet Draft BGP-MIB v2 July 13, 2005
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP UPDATE messages transmitted on this
connection. This object should be initialized to zero
(0) when the connection is established."
::= { bgpM2PeerCountersEntry 2 }
bgpM2PeerInTotalMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages received from the remote
peer on this connection. This object should be
initialized to zero when the connection is established."
::= { bgpM2PeerCountersEntry 3 }
bgpM2PeerOutTotalMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages transmitted to the remote
peer on this connection. This object should be
initialized to zero when the connection is established."
::= { bgpM2PeerCountersEntry 4 }
bgpM2PeerFsmEstablishedTrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the BGP FSM
transitioned into the established state
for this peer."
::= { bgpM2PeerCountersEntry 5 }
--
-- Per-Peer Prefix Counters
--
bgpM2PrefixCountersTable OBJECT-TYPE
Various Authors Expires January 12, 2006 [Page 40]
Internet Draft BGP-MIB v2 July 13, 2005
SYNTAX SEQUENCE OF BgpM2PrefixCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional per-peer, per AFI SAFI counters for prefixes"
::= { bgpM2PeerCounters 2 }
bgpM2PrefixCountersEntry OBJECT-TYPE
SYNTAX BgpM2PrefixCountersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about a bgp-peers prefix
counters."
INDEX {
bgpM2PeerIndex,
bgpM2PrefixCountersAfi,
bgpM2PrefixCountersSafi
}
::= { bgpM2PrefixCountersTable 1 }
BgpM2PrefixCountersEntry ::= SEQUENCE {
bgpM2PrefixCountersAfi
BgpM2Afi,
bgpM2PrefixCountersSafi
BgpM2Safi,
bgpM2PrefixInPrefixes
Gauge32,
bgpM2PrefixInPrefixesAccepted
Gauge32,
bgpM2PrefixInPrefixesRejected
Gauge32,
bgpM2PrefixOutPrefixes
Gauge32
}
bgpM2PrefixCountersAfi OBJECT-TYPE
SYNTAX BgpM2Afi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AFI index of the per-peer, per prefix counters"
::= { bgpM2PrefixCountersEntry 1 }
Various Authors Expires January 12, 2006 [Page 41]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2PrefixCountersSafi OBJECT-TYPE
SYNTAX BgpM2Safi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SAFI index of the per-peer, per prefix counters"
::= { bgpM2PrefixCountersEntry 2 }
bgpM2PrefixInPrefixes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes received from a peer and are
stored in the Adj-Ribs-In for that peer."
-- jmh - note that we are allowing stuff to be discarded
::= { bgpM2PrefixCountersEntry 7 }
bgpM2PrefixInPrefixesAccepted OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes for a peer that are installed
in the Adj-Ribs-In and are eligible to become active
in the Loc-Rib."
::= { bgpM2PrefixCountersEntry 8 }
bgpM2PrefixInPrefixesRejected OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes for a peer that are installed
in the Adj-Ribs-In and are NOT eligible to become active
in the Loc-Rib."
::= { bgpM2PrefixCountersEntry 9 }
bgpM2PrefixOutPrefixes OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes for a peer that are installed
Various Authors Expires January 12, 2006 [Page 42]
Internet Draft BGP-MIB v2 July 13, 2005
in that peers Adj-Ribs-Out."
::= { bgpM2PrefixCountersEntry 10 }
bgpM2PeerExtensions
OBJECT IDENTIFIER ::= { bgpM2Peer 7 }
bgpM2PeerNonCapExts
OBJECT IDENTIFIER ::= { bgpM2PeerExtensions 1 }
bgpM2PeerCapExts
OBJECT IDENTIFIER ::= { bgpM2PeerExtensions 2 }
--
-- Peer Route Reflection Extensions
--
bgpM2PeerRouteReflectionExts
OBJECT IDENTIFIER ::= { bgpM2PeerNonCapExts 2796 }
bgpM2PeerReflectorClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2PeerReflectorClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of route reflection client settings on a per-peer
basis."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { bgpM2PeerRouteReflectionExts 1 }
bgpM2PeerReflectorClientEntry OBJECT-TYPE
SYNTAX BgpM2PeerReflectorClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing data on a per-peer basis on whether
the peer is configured as a route reflector client."
REFERENCE
"RFC 2796 - BGP Route Reflection"
AUGMENTS {
bgpM2PeerEntry
Various Authors Expires January 12, 2006 [Page 43]
Internet Draft BGP-MIB v2 July 13, 2005
}
::= { bgpM2PeerReflectorClientTable 1 }
BgpM2PeerReflectorClientEntry ::= SEQUENCE {
bgpM2PeerReflectorClient
INTEGER
}
bgpM2PeerReflectorClient OBJECT-TYPE
SYNTAX INTEGER {
nonClient(0),
client(1),
meshedClient(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates whether the given peer is a
reflector client of this router, or not. A value of
nonClient indicates that this peer is not a reflector
client. A value of client indicates that this peer is a
reflector client that is not fully meshed with other
reflector clients. A value of meshedClient indicates
that the peer is a reflector client and is fully meshed
with all other reflector clients.
This value must be nonClient (0) for BGP external peers."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { bgpM2PeerReflectorClientEntry 1 }
--
-- Peer AS Confederations Extensions
--
bgpM2PeerASConfederationExts
OBJECT IDENTIFIER ::= { bgpM2PeerNonCapExts 3065 }
bgpM2PeerConfedMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2PeerConfedMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of confederation member settings on a per-peer
basis."
Various Authors Expires January 12, 2006 [Page 44]
Internet Draft BGP-MIB v2 July 13, 2005
REFERENCE
"RFC 3065 - BGP Confederations"
::= { bgpM2PeerASConfederationExts 1 }
bgpM2PeerConfedMemberEntry OBJECT-TYPE
SYNTAX BgpM2PeerConfedMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing data on a per-peer basis on whether
the peer is configured as a BGP confederation member."
REFERENCE
"RFC 3065 - BGP Confederations"
AUGMENTS {
bgpM2PeerEntry
}
::= { bgpM2PeerConfedMemberTable 1 }
BgpM2PeerConfedMemberEntry ::= SEQUENCE {
bgpM2PeerConfedMember
TruthValue
}
bgpM2PeerConfedMember OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates whether the given peer is in our
confederation or not."
REFERENCE
"RFC 3065 - BGP Confederations"
::= { bgpM2PeerConfedMemberEntry 1 }
--
-- Peer configuration objects
--
bgpM2PeerConfiguration
OBJECT IDENTIFIER ::= { bgpM2Peer 8 }
--
-- Administering activated peering sessions
Various Authors Expires January 12, 2006 [Page 45]
Internet Draft BGP-MIB v2 July 13, 2005
--
bgpM2CfgPeerAdminStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2CfgPeerAdminStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing rows for administratively starting and
stopping peering sessions."
::= { bgpM2PeerConfiguration 1 }
bgpM2CfgPeerAdminStatusEntry OBJECT-TYPE
SYNTAX BgpM2CfgPeerAdminStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing row for administratively starting and
stopping peers."
INDEX {
bgpM2PeerIndex
}
::= { bgpM2CfgPeerAdminStatusTable 1 }
BgpM2CfgPeerAdminStatusEntry ::= SEQUENCE {
bgpM2CfgPeerAdminStatus
INTEGER
}
bgpM2CfgPeerAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
stop(1),
start(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows the Manual Stop and Manual Start
events to be sent to an activated peering session."
::= { bgpM2CfgPeerAdminStatusEntry 1 }
--
-- Peer Configuration
--
Various Authors Expires January 12, 2006 [Page 46]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2CfgPeerNextIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the next appropriate value to
use as an index for creation of a row instance in
in the bgpM2CfgPeerTable. If the number of available
entries in the bgpM2CfgPeerTable is exhausted, a
retrieval value of this object instance will return
0. A value of 0 may also be returned if the agent
is otherwise incapable of bgpM2CfgPeerTable row creation
at the time of bgpM2CfgPeerNextIndex retrieval."
::= { bgpM2PeerConfiguration 2 }
bgpM2CfgPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2CfgPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP configuration peer table.
This table allows the configuration of the parameters
for a session with a BGP peer.
+++wayne provide description of how config should be done
for a peer per table."
::= { bgpM2PeerConfiguration 3 }
bgpM2CfgPeerEntry OBJECT-TYPE
SYNTAX BgpM2CfgPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information set up by a management
entity to configure a connection with a BGP peer."
INDEX { bgpM2CfgPeerIndex }
::= { bgpM2CfgPeerTable 1 }
BgpM2CfgPeerEntry ::= SEQUENCE {
bgpM2CfgPeerConfiguredVersion
Unsigned32,
bgpM2CfgAllowVersionNegotiation
TruthValue,
bgpM2CfgPeerLocalAddrType
Various Authors Expires January 12, 2006 [Page 47]
Internet Draft BGP-MIB v2 July 13, 2005
InetAddressType,
bgpM2CfgPeerLocalAddr
InetAddress,
bgpM2CfgPeerLocalAs
InetAutonomousSystemNumber,
bgpM2CfgPeerRemoteAddrType
InetAddressType,
bgpM2CfgPeerRemoteAddr
InetAddress,
bgpM2CfgPeerRemoteAs
InetAutonomousSystemNumber,
bgpM2CfgPeerEntryStorageType
StorageType,
bgpM2CfgPeerError
INTEGER,
bgpM2CfgPeerBgpPeerEntry
RowPointer,
bgpM2CfgPeerRowEntryStatus
RowStatus,
bgpM2CfgPeerIndex
Integer32,
bgpM2CfgPeerStatus
INTEGER
}
bgpM2CfgPeerConfiguredVersion OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The configured version to originally start with
this peer. The BGP speaker may permit negotiation
to a lower version number of the protocol depending on the
set value of bgpM2CfgAllowVersionNegotiation."
DEFVAL { 4 }
::= { bgpM2CfgPeerEntry 1 }
bgpM2CfgAllowVersionNegotiation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set to true, during session establishment with this
peer, negotiation to a version lower than that specified
in bgpM2CfgPeerConfiguredVersion will be allowed."
DEFVAL { false }
Various Authors Expires January 12, 2006 [Page 48]
Internet Draft BGP-MIB v2 July 13, 2005
::= { bgpM2CfgPeerEntry 2 }
bgpM2CfgPeerLocalAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address family of the speakers of this BGP
session."
::= { bgpM2CfgPeerEntry 3 }
bgpM2CfgPeerLocalAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (4..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the local end of the peering session."
::= { bgpM2CfgPeerEntry 4 }
bgpM2CfgPeerLocalAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Autonomous system represented to peer on peering
session initialization. Some implementations of
BGP can represent themselves as multiple ASes.
These implementations can set this to an alternate
autonomous system. If this object is set to zero
(0) at the point this row instance is set to active,
then the implementation will initialize this session
representing itself as the value of bgpM2CfgLocalAs."
DEFVAL { 0 }
::= { bgpM2CfgPeerEntry 5 }
bgpM2CfgPeerRemoteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address family of the speakers of the remote BGP
session."
::= { bgpM2CfgPeerEntry 6 }
Various Authors Expires January 12, 2006 [Page 49]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2CfgPeerRemoteAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(4..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the remote end (destination address
of peer) for peering session."
::= { bgpM2CfgPeerEntry 7 }
bgpM2CfgPeerRemoteAs OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Autonomous system number of the remote peer."
::= { bgpM2CfgPeerEntry 8 }
bgpM2CfgPeerEntryStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object type specifies the intended storage
type for the bgpM2CfgPeerEntry row instance."
::= { bgpM2CfgPeerEntry 9 }
bgpM2CfgPeerError OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
notActivated (1),
errDuplicatePeeringSession (2),
activated (3)
-- +++wayne more to follow
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates the current error status of
the row denoting the configured error status.
If this row is still under creation (has not been activated
bgpM2CfgPeerRowEntryStatus), then this instance will be set to
not-activated (1).
At the point that the row is activated, bgpM2CfgPeerError
Various Authors Expires January 12, 2006 [Page 50]
Internet Draft BGP-MIB v2 July 13, 2005
will reflect the error status of the row data itself. If
there is another session already activated with the same
local and remote addresses as denoted by
{bgpM2CfgPeerLocalAddrType, bgpM2CfgPeerLocalAddr,
bgpM2CfgPeerRemoteAddr}, then
the value of this will be set to
err-duplicate-peering-session (2).
If this row is associated with a peer session whose
initialization has been attempted, the value will be
set to activated (3) (and, bgpM2PeerCfgPeerEntry will
be set to the row instance of the entry in the
bgpM2PeerTable which reflects the state of the peering
session).
Note that this object only reflects the error as a
function of the attempted activation of this row as
containing data for a bgp peering session. The actual
state of the session at the point of any protocol exchange
or session state machine initiation is reflected in the
bgpM2PeerTable row instance (as reflected through
bgpM2CfgPeerPeerEntry) associated with this row instance."
::= { bgpM2CfgPeerEntry 10 }
bgpM2CfgPeerBgpPeerEntry OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Upon activation of the session data contained in this
row instance, this object points to an instance of a row
within the bgpM2PeerTable reflecting the session in its
initializing or operational state. Retrieval of this
column instance will always yield a value of {0.0} unless
the session has successfully been activated (via
bgpM2CfgPeerRowEntryStatus). Such row instances will always
have a value of bgpM2CfgPeerError which is activated (3)."
::= { bgpM2CfgPeerEntry 11 }
bgpM2CfgPeerRowEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object type is used to control creation,
activation, and deletion of this row instance."
Various Authors Expires January 12, 2006 [Page 51]
Internet Draft BGP-MIB v2 July 13, 2005
-- +++wayne need better directions for agent auto-removal
-- of row instances which have moved to active or error
-- state
::= { bgpM2CfgPeerEntry 12 }
bgpM2CfgPeerIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Uniquely identifies an instance of a peer row, as
an element of configuration."
::= { bgpM2CfgPeerEntry 13 }
bgpM2CfgPeerStatus OBJECT-TYPE
SYNTAX INTEGER {
halted(1),
running(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies the state of the peering session upon
activation. If disabled, the FSM is in the halted
state and no Automatic Start events are generated.
If enabled, the FSM is in the running state and
Automatic Start events may be generated."
::= { bgpM2CfgPeerEntry 14 }
--
-- Per-peer timers table
--
bgpM2CfgPeerTimersTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2CfgPeerTimersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for configuration of per-peer timers."
::= { bgpM2PeerConfiguration 4 }
bgpM2CfgPeerTimersEntry OBJECT-TYPE
SYNTAX BgpM2CfgPeerTimersEntry
MAX-ACCESS not-accessible
Various Authors Expires January 12, 2006 [Page 52]
Internet Draft BGP-MIB v2 July 13, 2005
STATUS current
DESCRIPTION
"Entry containing per-peer timer configuration."
AUGMENTS {
bgpM2CfgPeerEntry
}
::= { bgpM2CfgPeerTimersTable 1 }
BgpM2CfgPeerTimersEntry ::= SEQUENCE {
bgpM2CfgPeerConnectRetryInterval
Unsigned32,
bgpM2CfgPeerHoldTimeConfigured
Unsigned32,
bgpM2CfgPeerKeepAliveConfigured
Unsigned32,
bgpM2CfgPeerMinASOrigInterval
Unsigned32,
bgpM2CfgPeerMinRouteAdverInter
Unsigned32
}
bgpM2CfgPeerConnectRetryInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the ConnectRetry
timer. The suggested value for this timer is 120
seconds."
DEFVAL {
120
}
::= { bgpM2CfgPeerTimersEntry 1 }
bgpM2CfgPeerHoldTimeConfigured OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 3..65535 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the Hold Time configured
for this BGP speaker with this peer. This value
is placed in an OPEN message sent to this peer by
this BGP speaker, and is compared with the Hold
Time field in an OPEN message received from the
peer when determining the Hold Time (bgpM2PeerHoldTime)
Various Authors Expires January 12, 2006 [Page 53]
Internet Draft BGP-MIB v2 July 13, 2005
with the peer. This value must not be less than
three seconds if it is not zero (0) in which case
the Hold Time is NOT to be established with the
peer. The suggested value for this timer is 90
seconds."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Appendix 6.4"
DEFVAL {
90
}
::= { bgpM2CfgPeerTimersEntry 2 }
bgpM2CfgPeerKeepAliveConfigured OBJECT-TYPE
SYNTAX Unsigned32 ( 0 | 1..21845 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the KeepAlive timer
configured for this BGP speaker with this peer.
The value of this object will only determine the
KEEPALIVE messages frequency relative to the value
specified in bgpM2PeerHoldTimeConfigured; the actual
time interval for the KEEPALIVE messages is indicated
by bgpM2PeerKeepAlive. A reasonable maximum value
for this timer would be configured to be one third
of that of bgpM2PeerHoldTimeConfigured.
If the value of this object is zero (0), no
periodical KEEPALIVE messages are sent to the peer
after the BGP connection has been established.
The suggested value for this timer is 30 seconds."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Appendix 6.4"
DEFVAL {
30
}
::= { bgpM2CfgPeerTimersEntry 3 }
bgpM2CfgPeerMinASOrigInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the MinASOriginationInterval
timer. The suggested value for this timer is 15
seconds."
Various Authors Expires January 12, 2006 [Page 54]
Internet Draft BGP-MIB v2 July 13, 2005
DEFVAL {
15
}
::= { bgpM2CfgPeerTimersEntry 4 }
bgpM2CfgPeerMinRouteAdverInter OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the
MinRouteAdvertisementInterval timer. The suggested
value for this timer is 30 seconds."
DEFVAL {
30
}
::= { bgpM2CfgPeerTimersEntry 5 }
--
-- Per-peer configuration extensions
--
bgpM2CfgPeerExtensions
OBJECT IDENTIFIER ::= { bgpM2PeerConfiguration 5 }
bgpM2CfgPeerNonCapExts
OBJECT IDENTIFIER ::= { bgpM2CfgPeerExtensions 1 }
bgpM2CfgPeerCapExts
OBJECT IDENTIFIER ::= { bgpM2CfgPeerExtensions 2 }
--
-- Peer route reflection configuration
--
bgpM2CfgPeerRouteReflectionExts
OBJECT IDENTIFIER ::= { bgpM2CfgPeerNonCapExts 2796 }
bgpM2CfgPeerReflectorClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2CfgPeerReflectorClientEntry
MAX-ACCESS not-accessible
STATUS current
Various Authors Expires January 12, 2006 [Page 55]
Internet Draft BGP-MIB v2 July 13, 2005
DESCRIPTION
"Table of route reflection client settings on a per-peer
basis."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { bgpM2CfgPeerRouteReflectionExts 1 }
bgpM2CfgPeerReflectorClientEntry OBJECT-TYPE
SYNTAX BgpM2CfgPeerReflectorClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing data on a per-peer basis on whether
the peer is configured as a route reflector client."
REFERENCE
"RFC 2796 - BGP Route Reflection"
AUGMENTS {
bgpM2CfgPeerEntry
}
::= { bgpM2CfgPeerReflectorClientTable 1 }
BgpM2CfgPeerReflectorClientEntry ::= SEQUENCE {
bgpM2CfgPeerReflectorClient
INTEGER
}
bgpM2CfgPeerReflectorClient OBJECT-TYPE
SYNTAX INTEGER {
nonClient(0),
client(1),
meshedClient(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value indicates whether the given peer is a
reflector client of this router, or not. A value of
nonClient indicates that this peer is not a reflector
client. A value of client indicates that this peer is a
reflector client that is not fully meshed with other
reflector clients. A value of meshedClient indicates
that the peer is a reflector client and is fully meshed
with all other reflector clients.
This value must be nonClient (0) for BGP external peers."
REFERENCE
Various Authors Expires January 12, 2006 [Page 56]
Internet Draft BGP-MIB v2 July 13, 2005
"RFC 2796 - BGP Route Reflection"
::= { bgpM2CfgPeerReflectorClientEntry 1 }
--
-- Peer AS Confederations Extensions
--
bgpM2CfgPeerASConfederationExts
OBJECT IDENTIFIER ::= { bgpM2CfgPeerNonCapExts 3065 }
bgpM2CfgPeerConfedMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2CfgPeerConfedMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of confederation member settings on a per-peer
basis."
REFERENCE
"RFC 3065 - BGP Confederations"
::= { bgpM2CfgPeerASConfederationExts 1 }
bgpM2CfgPeerConfedMemberEntry OBJECT-TYPE
SYNTAX BgpM2CfgPeerConfedMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing data on a per-peer basis on whether
the peer is configured as a BGP confederation member."
REFERENCE
"RFC 3065 - BGP Confederations"
AUGMENTS {
bgpM2PeerEntry
}
::= { bgpM2CfgPeerConfedMemberTable 1 }
BgpM2CfgPeerConfedMemberEntry ::= SEQUENCE {
bgpM2CfgPeerConfedMember
TruthValue
}
bgpM2CfgPeerConfedMember OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
Various Authors Expires January 12, 2006 [Page 57]
Internet Draft BGP-MIB v2 July 13, 2005
STATUS current
DESCRIPTION
"This value indicates whether the given peer is in our
confederation or not."
REFERENCE
"RFC 3065 - BGP Confederations"
::= { bgpM2CfgPeerConfedMemberEntry 1 }
--
-- BGP NLRI Data
--
bgpM2Rib
OBJECT IDENTIFIER ::= { bgpM2 3 }
--
-- NLRI Table
--
bgpM2NlriTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2NlriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Received Path Attribute Table contains
information about paths to destination networks
received from all BGP4 peers. Collectively, this
represents the Adj-Ribs-In. The route where
bgpM2NlriBest is TRUE represents, for this NLRI,
the route that is installed in the LocRib from the
Adj-Ribs-In."
::= { bgpM2Rib 1 }
bgpM2NlriEntry OBJECT-TYPE
SYNTAX BgpM2NlriEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a path to a network."
INDEX {
bgpM2PeerIndex,
bgpM2NlriAfi,
bgpM2NlriSafi,
bgpM2NlriPrefix,
bgpM2NlriPrefixLen,
Various Authors Expires January 12, 2006 [Page 58]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2NlriIndex
}
::= { bgpM2NlriTable 1 }
BgpM2NlriEntry ::= SEQUENCE {
bgpM2NlriIndex
Unsigned32,
bgpM2NlriAfi
BgpM2Afi,
bgpM2NlriSafi
BgpM2Safi,
bgpM2NlriPrefixType
InetAddressType,
bgpM2NlriPrefix
InetAddress,
bgpM2NlriPrefixLen
InetAddressPrefixLength,
bgpM2NlriBest
TruthValue,
bgpM2NlriCalcLocalPref
Unsigned32,
bgpM2PathAttrIndex
Unsigned32,
bgpM2NlriOpaqueType
INTEGER,
bgpM2NlriOpaquePointer
RowPointer
}
bgpM2NlriIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This index allows for multiple instances of a base
prefix for a certain AFI SAFI from a given peer.
This is currently useful for two things:
1. Allowing for a peer in future implementations to
send more than a single route instance.
2. Allow for extensions which extend the NLRI field
to send the same prefix while utilizing other
extension specific information. An example of
this is RFC 3107 - Carrying MPLS labels in BGP."
REFERENCE
"RFC 3107 - Carrying Label Information in BGP-4"
::= { bgpM2NlriEntry 1 }
Various Authors Expires January 12, 2006 [Page 59]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2NlriAfi OBJECT-TYPE
SYNTAX BgpM2Afi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address family of the prefix for this NLRI."
::= { bgpM2NlriEntry 2 }
bgpM2NlriSafi OBJECT-TYPE
SYNTAX BgpM2Safi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The subsequent address family of the prefix for
this NLRI"
REFERENCE
"RFC 2858 - Multiprotocol Extensions for BGP-4"
::= { bgpM2NlriEntry 3 }
bgpM2NlriPrefixType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the IP address prefix in the
Network Layer Reachability Information field.
The value of this object is derived from the
appropriate value from the bgpM2NlriAfi field.
Where an appropriate InetAddressType is not
available, the value of the object must be
unknown(0).
XXX TODO - This seems like a hack."
::= { bgpM2NlriEntry 4 }
bgpM2NlriPrefix OBJECT-TYPE
SYNTAX InetAddress (SIZE (4..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An IP address prefix in the Network Layer
Reachability Information field. This object
is an IP address containing the prefix with
length specified by
bgpM2PathAttrAddrPrefixLen.
Various Authors Expires January 12, 2006 [Page 60]
Internet Draft BGP-MIB v2 July 13, 2005
Any bits beyond the length specified by
bgpM2PathAttrAddrPrefixLen are zeroed."
::= { bgpM2NlriEntry 5 }
bgpM2NlriPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Length in bits of the address prefix in
the Network Layer Reachability Information field."
::= { bgpM2NlriEntry 6 }
bgpM2NlriBest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether or not this route
was chosen as the best BGP4 route."
::= { bgpM2NlriEntry 7 }
bgpM2NlriCalcLocalPref OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The degree of preference calculated by the
receiving BGP4 speaker for an advertised
route."
::= { bgpM2NlriEntry 8 }
bgpM2PathAttrIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is a unique index for the per-NLRI entry
in the bgpM2PathAttrTable. It is assigned by the
agent at the point of creation of the bgpM2PathAttrTable
row entry. While its value is guaranteed to be unique
at any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of bgpM2PathAttrIndex row instance values across rows
Various Authors Expires January 12, 2006 [Page 61]
Internet Draft BGP-MIB v2 July 13, 2005
of the bgpM2PeerAttrTable. It is used to provide an
index structure for other tables whose data is logically
per-peer, per-NLRI."
::= { bgpM2NlriEntry 9 }
bgpM2NlriOpaqueType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
bgpMplsLabelStack(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object enumerates the type of the row that is
pointed to in the table row bgpM2NlriOpaquePointer
instance, if bgpM2NlriOpaquePointer is in fact not
a zero length. bgpM2NlriOpaqueType is necessary since
the data referenced by bgpM2NlriOpaquePointer is
opaque to BGP. For example, in the case of RFC 3107,
the label stack that is pointed to may occur in the
mplsLabelStackTable from the MPLS-LSR-MIB, and the
instance value of bgpM2NlriOpaqueType would be
bgpMplsLabelStack(1)."
REFERENCE
"RFC 3107 - Carrying Label Information in BGP-4
draft-ietf-mpls-lsr-mib-08.txt"
::= { bgpM2NlriEntry 10 }
bgpM2NlriOpaquePointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Pointer to a row that decomposes the data that is
opaque to the BGP MIB but is sent in the NLRI.
This RowPointer has zero (0) length data instance
if bgpM2NlriOpaqueType is none."
::= { bgpM2NlriEntry 11 }
--
-- Adj-Ribs-Out Table
--
bgpM2AdjRibsOutTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2AdjRibsOutEntry
Various Authors Expires January 12, 2006 [Page 62]
Internet Draft BGP-MIB v2 July 13, 2005
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains on a per-peer basis one or more
routes from the bgpM2NlriTable that have been
placed in this peer's Adj-Ribs-Out."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 3.2"
::= { bgpM2Rib 2 }
bgpM2AdjRibsOutEntry OBJECT-TYPE
SYNTAX BgpM2AdjRibsOutEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of BGP routes that have been placed into a
peer's Adj-Ribs-Out."
INDEX {
bgpM2PeerIndex,
bgpM2NlriAfi,
bgpM2NlriSafi,
bgpM2NlriPrefix,
bgpM2NlriPrefixLen,
bgpM2AdjRibsOutIndex
}
::= { bgpM2AdjRibsOutTable 1 }
BgpM2AdjRibsOutEntry ::= SEQUENCE {
bgpM2AdjRibsOutIndex
Unsigned32,
bgpM2AdjRibsOutRoute
RowPointer
}
bgpM2AdjRibsOutIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Certain extensions to BGP permit multiple instance of
a per afi, per safi prefix to be advertised to a peer.
This object allows the enumeration of them."
::= { bgpM2AdjRibsOutEntry 1 }
Various Authors Expires January 12, 2006 [Page 63]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2AdjRibsOutRoute OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object points to the route in the bgpM2NlriTable
that corresponds to the entry in the peer's
Adj-Rib-Out. Outgoing route maps are not
reflected at this point as those are part of the
Update-Send process."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 9.2"
::= { bgpM2AdjRibsOutEntry 2 }
--
-- BGP Rib Path Attributes Table
--
--
-- Path Attribute Counter
--
bgpM2PathAttrCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of entries in the bgpM2PathAttrTable."
::= { bgpM2Rib 3 }
--
-- Path Attributes Table
--
bgpM2PathAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2PathAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Provides per advertised network-prefix attribute data,
as advertised over a peering session."
::= { bgpM2Rib 4 }
bgpM2PathAttrEntry OBJECT-TYPE
SYNTAX BgpM2PathAttrEntry
Various Authors Expires January 12, 2006 [Page 64]
Internet Draft BGP-MIB v2 July 13, 2005
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains data about a given network
prefix, per-prefix and per-advertising peer."
INDEX {
bgpM2PathAttrIndex
}
::= { bgpM2PathAttrTable 1 }
BgpM2PathAttrEntry ::= SEQUENCE {
bgpM2PathAttrOrigin
INTEGER,
bgpM2PathAttrNextHopAddrType
InetAddressType,
bgpM2PathAttrNextHop
InetAddress,
bgpM2PathAttrMedPresent
TruthValue,
bgpM2PathAttrMed
Unsigned32,
bgpM2PathAttrLocalPrefPresent
TruthValue,
bgpM2PathAttrLocalPref
Unsigned32,
bgpM2PathAttrAtomicAggregate
INTEGER,
bgpM2PathAttrAggregatorAS
InetAutonomousSystemNumber,
bgpM2PathAttrAggregatorAddr
BgpM2Identifier,
bgpM2AsPathCalcLength
Unsigned32,
bgpM2AsPathString
SnmpAdminString,
bgpM2AsPathIndex
Unsigned32
}
bgpM2PathAttrOrigin OBJECT-TYPE
SYNTAX INTEGER {
igp(1),-- networks are interior
egp(2),-- networks learned via the EGP protocol
incomplete(3) -- undetermined
}
MAX-ACCESS read-only
Various Authors Expires January 12, 2006 [Page 65]
Internet Draft BGP-MIB v2 July 13, 2005
STATUS current
DESCRIPTION
"The ultimate origin of the path information."
::= { bgpM2PathAttrEntry 1 }
bgpM2PathAttrNextHopAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address family of the address for
the border router that should be used
to access the destination network."
::= { bgpM2PathAttrEntry 2 }
bgpM2PathAttrNextHop OBJECT-TYPE
SYNTAX InetAddress (SIZE(4..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the border router that
should be used to access the destination
network. This address is the nexthop
address received in the UPDATE packet.
The address family of this object will be the
same as that of the prefix in this row.
Note that for RFC2545 style double nexthops,
this object will always contain the global scope
nexthop. bgpM2LinkLocalNextHopTable will contain
the linklocal scope nexthop.
In the case that the mechanism documented in
draft-kato-bgp-ipv6-link-local-00.txt is used and
only a link local nexthop has been sent, ,
bgpM2LinkLocalNextHopPresent will be false
and bgpM2PathAttrNextHop will contain the link local
nexthop."
::= { bgpM2PathAttrEntry 3 }
bgpM2PathAttrMedPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Various Authors Expires January 12, 2006 [Page 66]
Internet Draft BGP-MIB v2 July 13, 2005
"Whether or not the MED value is present.
If it is not present, the bgpM2PathAttrMed
object has no useful value and should be set to 0."
::= { bgpM2PathAttrEntry 4 }
bgpM2PathAttrMed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This metric is used to discriminate
between multiple exit points to an
adjacent autonomous system."
::= { bgpM2PathAttrEntry 5 }
bgpM2PathAttrLocalPrefPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether or not the LocalPref value is present.
If it is not present, the bgpM2PathAttrLocalPref
object has no useful value and should be set to 0."
::= { bgpM2PathAttrEntry 6 }
bgpM2PathAttrLocalPref OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The originating BGP4 speakers degree of
preference for an advertised route."
::= { bgpM2PathAttrEntry 7 }
bgpM2PathAttrAtomicAggregate OBJECT-TYPE
SYNTAX INTEGER {
atomicAggregatePresent(1),
atomicAggregateMissing(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When this object is set to atomicAggregatePresent,
the ATOMIC_AGGREGATE Path Attribute is present
Various Authors Expires January 12, 2006 [Page 67]
Internet Draft BGP-MIB v2 July 13, 2005
and indicates that the NLRI MUST NOT be made
more specific."
::= { bgpM2PathAttrEntry 8 }
bgpM2PathAttrAggregatorAS OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS number of the last BGP4 speaker that
performed route aggregation. A value of
zero (0) indicates the absence of this
attribute.
Note propagation of AS of zero is illegal in
the Internet."
::= { bgpM2PathAttrEntry 9 }
bgpM2PathAttrAggregatorAddr OBJECT-TYPE
SYNTAX BgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the last BGP4 speaker
that performed route aggregation. A
value of 0.0.0.0 indicates the absence
of this attribute."
::= { bgpM2PathAttrEntry 10 }
bgpM2AsPathCalcLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the calculated length of the
AS Path according to the rules of the BGP specification.
This value is used in route selection."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 9.1.2.2.a"
::= { bgpM2PathAttrEntry 11 }
bgpM2AsPathString OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
Various Authors Expires January 12, 2006 [Page 68]
Internet Draft BGP-MIB v2 July 13, 2005
STATUS current
DESCRIPTION
"This is a string depicting the autonomous system
path to this network which was received from the
peer which advertised it. The format of the string
is implementation-dependent, and should be designed
for operator readability."
::= { bgpM2PathAttrEntry 12 }
bgpM2AsPathIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is a unique index for the decomposed AS Path
in the bgpM2AsPathTable. It is assigned by the
agent at the point of creation of the bgpM2AsPathTable
row entry. While its value is guaranteed to be unique
at any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of bgpM2AsPathIndex row instance values across rows
of the bgpM2AsPathTable."
::= { bgpM2PathAttrEntry 13 }
--
-- As-4 byte AS_PATH
--
bgpM2AsPath4byteTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2AsPath4byteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is present for BGP speakers that support
the AS 4byte specification and are functioning as
a router between 2-byte and 4-byte AS space."
REFERENCE
"draft-ietf-idr-as4bytes-04.txt - BGP support for
four-octet AS number space"
::= { bgpM2Rib 5 }
bgpM2AsPath4byteEntry OBJECT-TYPE
SYNTAX BgpM2AsPath4byteEntry
MAX-ACCESS not-accessible
STATUS current
Various Authors Expires January 12, 2006 [Page 69]
Internet Draft BGP-MIB v2 July 13, 2005
DESCRIPTION
"Each row contains the information for the AS 4-byte
extension's NEW_AS_PATH and NEW_AGGREGATOR attributes."
AUGMENTS {
bgpM2PathAttrEntry
}
::= { bgpM2AsPath4byteTable 1 }
BgpM2AsPath4byteEntry ::= SEQUENCE {
bgpM2AsPath4bytePathPresent
TruthValue,
bgpM2AsPath4byteAggregatorAS
InetAutonomousSystemNumber,
bgpM2AsPath4byteCalcLength
Unsigned32,
bgpM2AsPath4byteString
SnmpAdminString,
bgpM2AsPath4byteIndex
Unsigned32
}
bgpM2AsPath4bytePathPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value may only be true if this BGP Speaker
is functioning as a router between ASs that
are in 2-byte and 4-byte AS space. If this
value is true, then the NEW_AS_PATH attributes
are present and the 4-byte versions of the
appropriate path attributes are in this row.
If this value is false, then the following values
will be present in the row:
bgpM2PathAttrAggregatorAS - zero (0).
bgpM2AsPathCalcLength - zero (0).
bgpM2AsPathString - zero (0) length string.
bgpM2AsPathIndex - zero (0)."
::= { bgpM2AsPath4byteEntry 1 }
bgpM2AsPath4byteAggregatorAS OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
Various Authors Expires January 12, 2006 [Page 70]
Internet Draft BGP-MIB v2 July 13, 2005
STATUS current
DESCRIPTION
"The NEW_AGGREGATOR AS number of the last BGP4 speaker
that performed route aggregation. A value of
zero (0) indicates the absence of this
attribute.
Note propagation of AS of zero is illegal in
the Internet."
::= { bgpM2AsPath4byteEntry 2 }
bgpM2AsPath4byteCalcLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the calculated length of the
NEW_AS_PATH according to the rules of the BGP specification.
This value is used in route selection."
REFERENCE
"draft-ietf-idr-bgp4-17.txt, Sec. 9.1.2.2.a"
::= { bgpM2AsPath4byteEntry 3 }
bgpM2AsPath4byteString OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a string depicting the autonomous system
path to this network which was received from the
peer which advertised it. The format of the string
is implementation-dependent, and should be designed
for operator readability."
::= { bgpM2AsPath4byteEntry 4 }
bgpM2AsPath4byteIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is a unique index for the decomposed AS Path
in the bgpM2AsPathTable. It is assigned by the
agent at the point of creation of the bgpM2AsPathTable
row entry. While its value is guaranteed to be unique
at any time, it is otherwise opaque to the management
Various Authors Expires January 12, 2006 [Page 71]
Internet Draft BGP-MIB v2 July 13, 2005
application with respect to its value or the contiguity
of bgpM2AsPathIndex row instance values across rows
of the bgpM2AsPathTable. "
::= { bgpM2AsPath4byteEntry 5 }
-- BGP 4 Path attribute AS Path Table. There is one row in
-- this table for each AS which is advertised for a given
-- route as provided from a peer.
-- JMH
-- We need one of these for the NewAsPath for the 4byte draft
bgpM2AsPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2AsPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Path Attribute AS Path Table
contains the per network path (NLRI)
AS PATH data received from the
advertising BGP peer."
::= { bgpM2Rib 6 }
bgpM2AsPathTableEntry OBJECT-TYPE
SYNTAX BgpM2AsPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an AS path provided with a path to
a network."
INDEX {
bgpM2PathAttrIndex,
bgpM2AsPathSegmentIndex,
bgpM2AsPathElementIndex
}
::= { bgpM2AsPathTable 1 }
BgpM2AsPathEntry ::= SEQUENCE {
bgpM2AsPathSegmentIndex
Unsigned32,
bgpM2AsPathElementIndex
Unsigned32,
bgpM2AsPathType
INTEGER,
bgpM2AsPathElementValue
Various Authors Expires January 12, 2006 [Page 72]
Internet Draft BGP-MIB v2 July 13, 2005
InetAutonomousSystemNumber
}
bgpM2AsPathSegmentIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A per-AS path segment index. This will index a set of
autonomous systems in an AS path which are part
of the same sequence or set (as determined by
the row value of bgpM2AsPathType, which
should be the same value for each bgpM2AsPathTable
entry indexed by the same (bgpM2PathAttrIndex,
bgpM2AsPathIndex) pair)."
::= { bgpM2AsPathTableEntry 1 }
bgpM2AsPathElementIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A per-AS element index. This will index a particular
AS within a sequence or set of autonomous systems in
an AS path."
::= { bgpM2AsPathTableEntry 2 }
bgpM2AsPathType OBJECT-TYPE
SYNTAX INTEGER {
asSet(1),
asSequence(2),
confedSequence(3),
confedSet(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of sequence in which this asPath
was advertised as an attribute. Note that
all asPath row instances for a given (bgpM2PathAttrIndex,
bgpM2AsPathIndex) index pair will have their
bgpM2AsPathType set to the same value.
The values for bgpM2AsPathType are
interpreted as defined in the base BGP document
and the BGP AS Confederations document."
Various Authors Expires January 12, 2006 [Page 73]
Internet Draft BGP-MIB v2 July 13, 2005
REFERENCE
"draft-ietf-idr-bgp4-16
RFC 3065 - BGP AS Confederations"
::= { bgpM2AsPathTableEntry 3 }
bgpM2AsPathElementValue OBJECT-TYPE
SYNTAX InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An AS value for an AS the related NLRI traversed
in the propagation of its advertisement. This
value is to be interpreted in the context of the
sequence implied by bgpM2AsPathIndex and
bgpM2AsPathType (and, in sequence of the
other table rows with the same value of
bgpM2PathAttrIndex and bgpM2AsPathIndex)."
::= { bgpM2AsPathTableEntry 4 }
-- BGP 4 Path unknown attribute. There is one row in
-- this table for each attribute not known by this BGP
-- implementation (or agent instrumentation), but provided
-- from a peer.
bgpM2PathAttrUnknownTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2PathAttrUnknownEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Path Attribute Unknown Table
contains the per network path (NLRI)
data on the path attributes advertised
with a route but not known to the local BGP implementation
or not otherwise capable of being returned from this agent.
The absence of row data for a given index value for
bgpM2PathAttrIndex indicates a lack of such unknown
attribute information for the indicated network path
(as indexed by that bgpM2PathAttrIndex value in the
bgpM2PathAttrTable)."
::= { bgpM2Rib 7 }
bgpM2PathAttrUnknownEntry OBJECT-TYPE
SYNTAX BgpM2PathAttrUnknownEntry
MAX-ACCESS not-accessible
Various Authors Expires January 12, 2006 [Page 74]
Internet Draft BGP-MIB v2 July 13, 2005
STATUS current
DESCRIPTION
"Information about an unknown attribute
provided with a path to a network."
INDEX {
bgpM2PathAttrIndex,
bgpM2PathAttrUnknownIndex
}
::= { bgpM2PathAttrUnknownTable 1 }
BgpM2PathAttrUnknownEntry ::= SEQUENCE {
bgpM2PathAttrUnknownIndex
Unsigned32,
bgpM2PathAttrUnknownType
Unsigned32,
bgpM2PathAttrUnknownValue
OCTET STRING
}
bgpM2PathAttrUnknownIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index for a row in this table."
::= { bgpM2PathAttrUnknownEntry 1 }
bgpM2PathAttrUnknownType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The attribute type advertised with this unknown
attribute by the peer."
::= { bgpM2PathAttrUnknownEntry 2 }
-- Maximum size of the following is derived as
-- 4096 max message size
-- - 16 BGP message marker bytes
-- - 2 BGP message size
-- - 1 BGP message type (UPDATE with unknown attr)
-- - 2 UPDATE routes length (even assuming no routes)
-- - 2 UPDATE path attributes length
-- - 1 path attribute flag octet
Various Authors Expires January 12, 2006 [Page 75]
Internet Draft BGP-MIB v2 July 13, 2005
-- - 2 unknown path attr type (in bgpM2PathAttrUnknownType)
-- ---------
-- 4070 bytes maximum per-message attribute value data
bgpM2PathAttrUnknownValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4070))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of path attribute not understood
by the base BGP-4 document.
Octets beyond the maximum size, if any,
are not recorded by this row object. "
::= { bgpM2PathAttrUnknownEntry 3 }
--
-- Path Attribute Extensions
--
bgpM2PathAttrExtensions
OBJECT IDENTIFIER ::= { bgpM2Rib 8 }
bgpM2PathAttrNonCapExts
OBJECT IDENTIFIER ::= { bgpM2PathAttrExtensions 1 }
bgpM2PathAttrCapExts
OBJECT IDENTIFIER ::= { bgpM2PathAttrExtensions 2 }
--
-- Path Attribute Route Reflection Extensions
--
--
-- Originator ID Table
--
bgpM2PathAttrRouteReflectionExts
OBJECT IDENTIFIER ::= { bgpM2PathAttrNonCapExts 2796 }
bgpM2PathAttrOriginatorIdTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2PathAttrOriginatorIdEntry
Various Authors Expires January 12, 2006 [Page 76]
Internet Draft BGP-MIB v2 July 13, 2005
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Per prefix data pertinent to advertisement of a
network prefix through an originator."
REFERENCE
"RFC 2796 - BGP Route Reflection"
::= { bgpM2PathAttrRouteReflectionExts 1 }
bgpM2PathAttrOriginatorIdEntry OBJECT-TYPE
SYNTAX BgpM2PathAttrOriginatorIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains data pertinent to a network
prefix as received through its originating BGP
route reflector."
REFERENCE
"RFC 2796 - BGP Route Reflection"
INDEX {
bgpM2PathAttrIndex
}
::= { bgpM2PathAttrOriginatorIdTable 1 }
BgpM2PathAttrOriginatorIdEntry ::= SEQUENCE {
bgpM2PathAttrOriginatorId
BgpM2Identifier
}
bgpM2PathAttrOriginatorId OBJECT-TYPE
SYNTAX BgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Originator-ID identifying the router that initially
advertised this destination to a Route Reflector. A
value of 0.0.0.0 indicates the absence of this attribute."
REFERENCE
"This attribute is defined in [RFC2796]."
::= { bgpM2PathAttrOriginatorIdEntry 1 }
--
-- Cluster table
--
Various Authors Expires January 12, 2006 [Page 77]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2PathAttrClusterTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2PathAttrClusterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Path Attribute Cluster Table
contains the per network path (NLRI)
data on the reflection path which a
route has traversed. The absence of row
data for a given index value for bgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that bgpM2PathAttrIndex value in the bgpM2PathAttrTable)."
::= { bgpM2PathAttrRouteReflectionExts 2 }
bgpM2PathAttrClusterEntry OBJECT-TYPE
SYNTAX BgpM2PathAttrClusterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a cluster traversal
provided with a path to a network."
INDEX {
bgpM2PathAttrIndex,
bgpM2PathAttrClusterIndex
}
::= { bgpM2PathAttrClusterTable 1 }
BgpM2PathAttrClusterEntry ::= SEQUENCE {
bgpM2PathAttrClusterIndex
Unsigned32,
bgpM2PathAttrClusterValue
BgpM2Identifier
}
bgpM2PathAttrClusterIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integral index for a row in this table."
::= { bgpM2PathAttrClusterEntry 1 }
bgpM2PathAttrClusterValue OBJECT-TYPE
Various Authors Expires January 12, 2006 [Page 78]
Internet Draft BGP-MIB v2 July 13, 2005
SYNTAX BgpM2Identifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A four octet long value representing a part of the
reflection path that the route has passed. Each such four
octet long value represents the ID of a cluster that
the route has traversed. The sequence of this path as
received in the route advertisement will be preserved in
the sequence of bgpM2PathAttrClusterTable rows (and the
bgpM2PathAttrClusterValues in each row) as returned for
a given bgpM2PathAttrIndex value, and the monotonically
increasing sequence of bgpM2PathAttrClusterIndex values
for that bgpM2PathAttrIndex."
REFERENCE
"This attribute is defined in [RFC2796]."
::= { bgpM2PathAttrClusterEntry 2 }
--
-- BGP Communities
--
bgpM2PathAttrCommunityExts
OBJECT IDENTIFIER ::= { bgpM2PathAttrNonCapExts 1997 }
bgpM2PathAttrCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2PathAttrCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP-4 Path Attribute Community Table
contains the per network path (NLRI)
data on the community membership advertised
with a route. The absence of row
data for a given index value for bgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that bgpM2PathAttrIndex value in the bgpM2PathAttrTable)."
::= { bgpM2PathAttrCommunityExts 1 }
bgpM2PathAttrCommEntry OBJECT-TYPE
SYNTAX BgpM2PathAttrCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Various Authors Expires January 12, 2006 [Page 79]
Internet Draft BGP-MIB v2 July 13, 2005
"Information about a community association
provided with a path to a network."
INDEX {
bgpM2PathAttrIndex,
bgpM2PathAttrCommIndex
}
::= { bgpM2PathAttrCommTable 1 }
BgpM2PathAttrCommEntry ::= SEQUENCE {
bgpM2PathAttrCommIndex
Unsigned32,
bgpM2PathAttrCommValue
BgpM2Community
}
bgpM2PathAttrCommIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integer index for a row in this table."
::= { bgpM2PathAttrCommEntry 1 }
bgpM2PathAttrCommValue OBJECT-TYPE
SYNTAX BgpM2Community
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value representing a community. There are certain
4-octet long values which could be returned in this
columnar row data that carry additional semantics."
REFERENCE
"RFC 1997 - BGP Communities Attribute"
::= { bgpM2PathAttrCommEntry 2 }
--
-- BGP Extended Communities
--
bgpM2PathAttrExtCommTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2PathAttrExtCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Various Authors Expires January 12, 2006 [Page 80]
Internet Draft BGP-MIB v2 July 13, 2005
"The BGP-4 Path Attribute Community Table
contains the per network path (NLRI)
data on the extended community membership advertised
with a route. The absence of row
data for a given index value for bgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that bgpM2PathAttrIndex value in the bgpM2PathAttrTable).
XXX JMH - can not assign the OID until an RFC is published."
::= { bgpM2PathAttrNonCapExts XXX }
bgpM2PathAttrExtCommEntry OBJECT-TYPE
SYNTAX BgpM2PathAttrExtCommEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about an extended community association
provided with a path to a network."
INDEX {
bgpM2PathAttrIndex,
bgpM2PathAttrExtCommIndex
}
::= { bgpM2PathAttrExtCommTable 1 }
BgpM2PathAttrExtCommEntry ::= SEQUENCE {
bgpM2PathAttrExtCommIndex
Unsigned32,
bgpM2PathAttrExtCommValue
BgpM2ExtendedCommunity
}
bgpM2PathAttrExtCommIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An integral index for a row in this table."
::= { bgpM2PathAttrExtCommEntry 1 }
bgpM2PathAttrExtCommValue OBJECT-TYPE
SYNTAX BgpM2ExtendedCommunity
MAX-ACCESS read-only
STATUS current
Various Authors Expires January 12, 2006 [Page 81]
Internet Draft BGP-MIB v2 July 13, 2005
DESCRIPTION
"A value representing an extended community which was
received with the route implied by the bgpM2PathAttr
Index value of this row data. There are certain
8-octet long values which could be returned in this
columnar row data that carry additional semantics."
REFERENCE
"BGP-EXTCOMM - BGP Extended Communities Attribute"
::= { bgpM2PathAttrExtCommEntry 2 }
--
-- RFC 2545 link local nexthop
--
bgpM2LinkLocalNextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpM2LinkLocalNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of link local nexthops as sent by RFC 2545
for IPv6 BGP Speakers."
REFERENCE
"RFC 2545 - Use of BGP-4 Multiprotocol Extensions
for IPv6 Inter-Domain Routing"
::= { bgpM2PathAttrNonCapExts 2545 }
bgpM2LinkLocalNextHopEntry OBJECT-TYPE
SYNTAX BgpM2LinkLocalNextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing the link-local nexthops as sent
by a BGP speaker running RFC 2545 extensions for
double-nexthops."
INDEX {
bgpM2PathAttrIndex
}
::= { bgpM2LinkLocalNextHopTable 1 }
BgpM2LinkLocalNextHopEntry ::= SEQUENCE {
bgpM2LinkLocalNextHopPresent
TruthValue,
bgpM2LinkLocalNextHop
InetAddress
}
Various Authors Expires January 12, 2006 [Page 82]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2LinkLocalNextHopPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value is TRUE if and only if the BGP
speaker is receiving IPv6 NLRI using the
RFC 2545 double nexthop convention and it
has received a link local scope nexthop in
addition to the global scope nexthop."
::= { bgpM2LinkLocalNextHopEntry 1 }
bgpM2LinkLocalNextHop OBJECT-TYPE
SYNTAX InetAddress (SIZE(20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value contains an IPv6 link local address of
InetAddressType of type ipv6z. This value is only
present if bgpM2LinkLocalNextHopPresent is true."
::= { bgpM2LinkLocalNextHopEntry 2 }
--
-- Conformance Information
--
bgpM2Conformance
OBJECT IDENTIFIER ::= { bgpM2 4 }
bgpM2MIBCompliances OBJECT IDENTIFIER ::=
{ bgpM2Conformance 1 }
bgpM2MIBGroups OBJECT IDENTIFIER ::=
{ bgpM2Conformance 2 }
bgpM2MIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the BGP4 mib."
MODULE -- this module
MANDATORY-GROUPS {
bgpM2TimersGroup,
Various Authors Expires January 12, 2006 [Page 83]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2CountersGroup,
bgpM2AsPathGroup,
bgpM2As4byteGroup,
bgpM2BaseGroup,
bgpM2ErrorsGroup,
bgpM2PeerGroup,
bgpM2PathAttributesGroup
}
GROUP bgpM2MIBNotificationsGroup
DESCRIPTION
"The notifications group is completely optional,
but highly recommended."
GROUP bgpM2CommunitiesGroup
DESCRIPTION
"The communities group is mandatory only for those
which support the BGP community attribute."
GROUP bgpM2ExtCommunitiesGroup
DESCRIPTION
"The communities group is mandatory only for those
which support the BGP extended community attribute."
GROUP bgpM2RouteReflectionGroup
DESCRIPTION
"The communities group is mandatory only for those
which support the BGP route reflection relationships."
GROUP bgpM2AsConfederationGroup
DESCRIPTION
"The communities group is mandatory only for those
which support the BGP confederation membership."
GROUP bgpM2TimersGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP bgpM2CountersGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP bgpM2CapabilitiesGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP bgpM2AsPathGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP bgpM2As4byteGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP bgpM2BaseGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP bgpM2ErrorsGroup
DESCRIPTION
Various Authors Expires January 12, 2006 [Page 84]
Internet Draft BGP-MIB v2 July 13, 2005
"This group is mandatory for all agent implementations."
GROUP bgpM2PeerGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP bgpM2PathAttributesGroup
DESCRIPTION
"This group is mandatory for all agent implementations."
GROUP bgpM2PeerConfigurationGroup
DESCRIPTION
"This group is optional for implementations that wish to
support configuration via SNMP."
GROUP bgpM2PeerRouteReflectorCfgGroup
DESCRIPTION
"This group is optional for implementations that wish to
support configuration of route reflection via SNMP.
Implementation of this feature requires support of the
bgpM2PeerConfigurationGroup."
GROUP bgpM2PeerAsConfederationCfgGroup
DESCRIPTION
"This group is optional for implementations that wish to
support configuration of BGP AS Confederations via SNMP.
Implementation of this feature requires support of the
bgpM2PeerConfigurationGroup."
GROUP bgpM2Rfc2545Group
DESCRIPTION
"This group is required for peers that support exchanging
of IPv6 NLRI per RFC 2545."
::= { bgpM2MIBCompliances 1 }
bgpM2CommunitiesGroup OBJECT-GROUP
OBJECTS {
bgpM2PathAttrCommIndex,
bgpM2PathAttrCommValue
}
STATUS current
DESCRIPTION
"Objects associated with BGP communities."
::= { bgpM2MIBGroups 1 }
bgpM2ExtCommunitiesGroup OBJECT-GROUP
OBJECTS {
bgpM2PathAttrExtCommIndex,
bgpM2PathAttrExtCommValue
}
STATUS current
Various Authors Expires January 12, 2006 [Page 85]
Internet Draft BGP-MIB v2 July 13, 2005
DESCRIPTION
"Objects associated with BGP extended communities."
::= { bgpM2MIBGroups 2 }
bgpM2RouteReflectionGroup OBJECT-GROUP
OBJECTS {
bgpM2RouteReflector,
bgpM2ClusterId,
bgpM2PeerReflectorClient,
bgpM2PathAttrOriginatorId,
bgpM2PathAttrClusterIndex,
bgpM2PathAttrClusterValue
}
STATUS current
DESCRIPTION
"Objects associated with BGP route reflection."
::= { bgpM2MIBGroups 3 }
bgpM2AsConfederationGroup OBJECT-GROUP
OBJECTS {
bgpM2ConfederationRouter,
bgpM2ConfederationId,
bgpM2PeerConfedMember
}
STATUS current
DESCRIPTION
"Objects associated with BGP confederation membership."
::= { bgpM2MIBGroups 4 }
bgpM2TimersGroup OBJECT-GROUP
OBJECTS {
bgpM2PeerFsmEstablishedTime,
bgpM2PeerInUpdatesElapsedTime,
bgpM2PeerConnectRetryInterval,
bgpM2PeerHoldTimeConfigured,
bgpM2PeerKeepAliveConfigured,
bgpM2PeerMinASOrigInterval,
bgpM2PeerMinRouteAdverInterval,
bgpM2PeerHoldTime,
bgpM2PeerKeepAlive
}
STATUS current
DESCRIPTION
"Objects associated with BGP peering timers."
::= { bgpM2MIBGroups 5 }
Various Authors Expires January 12, 2006 [Page 86]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2CountersGroup OBJECT-GROUP
OBJECTS {
bgpM2PeerInUpdates,
bgpM2PeerOutUpdates,
bgpM2PeerInTotalMessages,
bgpM2PeerOutTotalMessages,
bgpM2PeerFsmEstablishedTrans,
bgpM2PrefixCountersAfi,
bgpM2PrefixCountersSafi,
bgpM2PrefixInPrefixes,
bgpM2PrefixInPrefixesAccepted,
bgpM2PrefixInPrefixesRejected,
bgpM2PrefixOutPrefixes
}
STATUS current
DESCRIPTION
"Objects to count discrete events and exchanges on BGP
sessions."
::= { bgpM2MIBGroups 6 }
bgpM2CapabilitiesGroup OBJECT-GROUP
OBJECTS {
bgpM2CapabilitySupportAvailable,
bgpM2SupportedCapabilityCode,
bgpM2SupportedCapability,
bgpM2PeerCapAnnouncedCode,
bgpM2PeerCapAnnouncedIndex,
bgpM2PeerCapAnnouncedValue,
bgpM2PeerCapReceivedCode,
bgpM2PeerCapReceivedIndex,
bgpM2PeerCapReceivedValue
}
STATUS current
DESCRIPTION
"Objects to report capabilities as received on BGP
sessions."
::= { bgpM2MIBGroups 7 }
bgpM2AsPathGroup OBJECT-GROUP
OBJECTS {
bgpM2AsPathSegmentIndex,
bgpM2AsPathElementIndex,
bgpM2AsPathType,
bgpM2AsPathElementValue
}
STATUS current
Various Authors Expires January 12, 2006 [Page 87]
Internet Draft BGP-MIB v2 July 13, 2005
DESCRIPTION
"Objects to report AS paths received on BGP NLRIs."
::= { bgpM2MIBGroups 8 }
bgpM2As4byteGroup OBJECT-GROUP
OBJECTS {
bgpM2AsSize,
bgpM2AsPath4bytePathPresent,
bgpM2AsPath4byteAggregatorAS,
bgpM2AsPath4byteCalcLength,
bgpM2AsPath4byteString,
bgpM2AsPath4byteIndex
}
STATUS current
DESCRIPTION
"AS Size objects."
::= { bgpM2MIBGroups 9 }
bgpM2BaseGroup OBJECT-GROUP
OBJECTS {
bgpM2LocalAs,
bgpM2LocalIdentifier,
bgpM2VersionIndex,
bgpM2VersionSupported
}
STATUS current
DESCRIPTION
"Basic objects in local BGP implementation."
::= { bgpM2MIBGroups 10 }
bgpM2ErrorsGroup OBJECT-GROUP
OBJECTS {
bgpM2PeerLastErrorReceived,
bgpM2PeerLastErrorReceivedData,
bgpM2PeerLastErrorReceivedTime,
bgpM2PeerLastErrorReceivedText,
bgpM2PeerLastErrorSent,
bgpM2PeerLastErrorSentData,
bgpM2PeerLastErrorSentTime,
bgpM2PeerLastErrorSentText
}
STATUS current
DESCRIPTION
"Errors received on BGP peering sessions."
::= { bgpM2MIBGroups 11 }
Various Authors Expires January 12, 2006 [Page 88]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2PeerGroup OBJECT-GROUP
OBJECTS {
bgpM2PeerInstance,
bgpM2PeerIdentifier,
bgpM2PeerState,
bgpM2PeerStatus,
bgpM2PeerConfiguredVersion,
bgpM2PeerNegotiatedVersion,
bgpM2PeerLocalAddrType,
bgpM2PeerLocalAddr,
bgpM2PeerLocalPort,
bgpM2PeerLocalAs,
bgpM2PeerRemoteAddrType,
bgpM2PeerRemoteAddr,
bgpM2PeerRemotePort,
bgpM2PeerRemoteAs,
bgpM2PeerIndex
}
STATUS current
DESCRIPTION
"Core object types on BGP peering sessions."
::= { bgpM2MIBGroups 12 }
bgpM2PathAttributesGroup OBJECT-GROUP
OBJECTS {
bgpM2PathAttrCount,
bgpM2AsPathCalcLength,
bgpM2AsPathElementValue,
bgpM2AsPathIndex,
bgpM2AsPathString,
bgpM2AsPathType,
bgpM2NlriAfi,
bgpM2NlriBest,
bgpM2NlriPrefixType,
bgpM2NlriPrefix,
bgpM2NlriPrefixLen,
bgpM2NlriSafi,
bgpM2NlriOpaqueType,
bgpM2NlriOpaquePointer,
bgpM2NlriIndex,
bgpM2NlriCalcLocalPref,
bgpM2AdjRibsOutIndex,
bgpM2AdjRibsOutRoute,
bgpM2PathAttrAggregatorAS,
bgpM2PathAttrAggregatorAddr,
bgpM2PathAttrAtomicAggregate,
bgpM2PathAttrIndex,
Various Authors Expires January 12, 2006 [Page 89]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2PathAttrLocalPref,
bgpM2PathAttrLocalPrefPresent,
bgpM2PathAttrMed,
bgpM2PathAttrMedPresent,
bgpM2PathAttrNextHop,
bgpM2PathAttrNextHopAddrType,
bgpM2PathAttrOrigin,
bgpM2PathAttrUnknownIndex,
bgpM2PathAttrUnknownType,
bgpM2PathAttrUnknownValue
}
STATUS current
DESCRIPTION
"Attributes received on BGP peering sessions."
::= { bgpM2MIBGroups 13 }
bgpM2PeerConfigurationGroup OBJECT-GROUP
OBJECTS {
bgpM2CfgBaseScalarStorageType,
bgpM2CfgLocalAs,
bgpM2CfgLocalIdentifier,
bgpM2CfgPeerAdminStatus,
bgpM2CfgPeerNextIndex,
bgpM2CfgPeerConfiguredVersion,
bgpM2CfgAllowVersionNegotiation,
bgpM2CfgPeerLocalAddrType,
bgpM2CfgPeerLocalAddr,
bgpM2CfgPeerLocalAs,
bgpM2CfgPeerRemoteAddrType,
bgpM2CfgPeerRemoteAddr,
bgpM2CfgPeerRemoteAs,
bgpM2CfgPeerEntryStorageType,
bgpM2CfgPeerError,
bgpM2CfgPeerBgpPeerEntry,
bgpM2CfgPeerRowEntryStatus,
bgpM2CfgPeerIndex,
bgpM2CfgPeerStatus,
bgpM2CfgPeerConnectRetryInterval,
bgpM2CfgPeerHoldTimeConfigured,
bgpM2CfgPeerKeepAliveConfigured,
bgpM2CfgPeerMinASOrigInterval,
bgpM2CfgPeerMinRouteAdverInter
}
STATUS current
DESCRIPTION
"Configuration objects for BGP peers."
::= { bgpM2MIBGroups 14 }
Various Authors Expires January 12, 2006 [Page 90]
Internet Draft BGP-MIB v2 July 13, 2005
bgpM2PeerRouteReflectorCfgGroup OBJECT-GROUP
OBJECTS {
bgpM2CfgRouteReflector,
bgpM2CfgClusterId,
bgpM2CfgPeerReflectorClient
}
STATUS current
DESCRIPTION
"Configuration objects for BGP peers that support route
reflection."
::= { bgpM2MIBGroups 15 }
bgpM2PeerAsConfederationCfgGroup OBJECT-GROUP
OBJECTS {
bgpM2CfgConfederationRouter,
bgpM2CfgConfederationId,
bgpM2CfgPeerConfedMember
}
STATUS current
DESCRIPTION
"Configuration objects for BGP peers that support BGP
confederations."
::= { bgpM2MIBGroups 16 }
bgpM2MIBNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
bgpM2Established,
bgpM2BackwardTransition
}
STATUS current
DESCRIPTION
"This group contains objects for notifications
supported by this mib module."
::= { bgpM2MIBGroups 17 }
bgpM2Rfc2545Group OBJECT-GROUP
OBJECTS {
bgpM2LinkLocalNextHopPresent,
bgpM2LinkLocalNextHop
}
STATUS current
DESCRIPTION
"This group is required for peers that support exchanging
of IPv6 NLRI per RFC 2545."
::= { bgpM2MIBGroups 18 }
Various Authors Expires January 12, 2006 [Page 91]
Internet Draft BGP-MIB v2 July 13, 2005
END
5. Intellectual Property Rights
The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to per-
tain to the implementation or use of the technology described in this
document or the extent to which any license under such rights might
or might not be available; neither does it represent that it has made
any effort to identify any such rights. Information on the IETF's
procedures with respect to rights in standards-track and standards-
related documentation can be found in BCP-11. Copies of claims of
rights made available for publication and any assurances of licenses
to be made available, or the result of an attempt made to obtain a
general license or permission for the use of such proprietary rights
by implementors or users of this specification can be obtained from
the IETF Secretariat.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights which may cover technology that may be required to practice
this standard. Please address the information to the IETF Executive
Director.
6. Security Considerations
This MIB relates to a system providing inter-domain routing. As
such, improper manipulation of the objects represented by this MIB
may result in denial of service to a large number of end-users.
There are several management objects defined in this MIB that have a
MAX-ACCESS clause of read-write and/or read-create. Such objects
should be considered sensitive or vulnerable in most network environ-
ments. The support for SET operations in a non-secure environment
without proper protection can have a negative effect on network oper-
ations. These objects include:
XXX TODO
There are a number of managed objects in this MIB that con-
tain sensitive information regarding the operation of a network. For
example, a BGP peer's local and remote addresses might be sensitive
for ISPs who want to keep interface addresses on routers confiden-
tial to prevent router addresses used for a denial of service attack
or spoofing.
Various Authors Expires January 12, 2006 [Page 92]
Internet Draft BGP-MIB v2 July 13, 2005
Therefore, it is important in most environments to control read
access to these objects and possibly to even encrypt the values of
these object when sending them over the network via SNMP.
SNMPv1 by itself is not a secure environment. Even if the network
itself is secure (for example by using IPSec), there is still no con-
trol as to who on the secure network is allowed to access and GET/SET
(read/change/create/delete) the objects in this MIB.
It is recommended that the implementers consider the security fea-
tures as provided by the SNMPv3 framework.[REF] Specifically, the
implementation and use of the User-based Security Model [REF] and the
View-based Access Control Model [REF] is recommended to provide
appropriate security controls.
It is then an operator/user responsibility to ensure that the SNMP
entity giving access to an instance of this MIB, is properly config-
ured to give access to the objects only to those principals (users)
that have legitimate rights to indeed GET or SET (change/cre-
ate/delete) them.
7. Acknowledgements
Tom Nadeau, Cisco Systems, Inc.
Jon Saperia, JDS Consulting, Inc.
Bill Fenner, AT&T Research
Mike McFaden, Riverstone Networks, Inc.
Joel Krauska, Exodus Communications, Inc.
Carl W. Kalbfleisch, Verio Networks, Inc.
Joe Dupre, Gold Wire Technology
others TBD...
8. Changes From Last Version
This section is used to track changes from version to version of this
document. This section will be removed from the document prior to
being issued to IDR working group last call.
* Changes from draft-ietf-idr-bgp4-mibv2-03.txt to draft-ietf-
idr-bgp4-mibv2-04.txt (12 January 2004)
Remove all objects related to BGP authentication as BGP
authentication has been officially removed.
Various Authors Expires January 12, 2006 [Page 93]
Internet Draft BGP-MIB v2 July 13, 2005
Removed bgpM2AsPathElementValue from bgpM2AsPathTable
Add current OPS group MIB boilerplate and security boiler-
plate. Work still needs to be done in the security section.
Split references into Normative References and Informational
References. Add IETF Intellectual Property Rights statement.
Update copyright dates.
Add new TEXTUAL-CONVENTION, BgpM2Afi to more properly reflect
BGP Multi-Protocol Extensions.
Add bgpM2NlriPrefixType to bgpM2NlriTable as an interim mecha-
nism to support "proper" translation of an AFI to an InetAd-
dressType. Further thought must be put into this.
Delete bgpM2CfgPeerRemotePort object. Deployed implementa-
tions do not seem to allow this to be configured.
Add bgpM2PeerInstance to permit multiple BGP routing instances
to be supported.
Renumber numerous OIDs to account for re-organizing objects.
Update conformance statements to match.
* Changes from draft-ietf-idr-bgp4-mibv2-02.txt to draft-ietf-
idr-bgp4-mibv2-03.txt (4 November 2002):
Changed the order of the bgpM2NlriPrefixLen and
bgpM2NlriPrefix objects and renumbered them. This was to make
it consistant with user expectations.
Clarify the peer table description text to specify the remote
peer.
Use SnmpAdminString instead of DisplayString.
Correct TEXTUAL CONVENTION for extended communities.
Changed enumerations of bgpM2PathATtrAtomicAggregate.
Added link local table for RFC 2545 nexthops.
* Changes from draft-ietf-idr-bgp4-mibv2-01.txt to draft-ietf-
idr-bgp4-mibv2-02.txt (28 February 2002)
Lots of changes in this rewrite, these are the most dramatic:
Various Authors Expires January 12, 2006 [Page 94]
Internet Draft BGP-MIB v2 July 13, 2005
Configuration objects and tables added.
All references to 'bgp' in object descriptors changed to
'bgpM2' to disambiguate from RFC 1657 and its OBSOLETing MIB.
Community Textual conventions added to beginning of MIB.
bgpM2CalcLength and PathString columns added to bgpM2PathAttr
table.
Creation of separate bgpM2AdjRibsOutTable.
Appearance of NLRI table notions such as 'opaque type'.
Overhaul of specification of AS Path types to accommodate eas-
ier management at time of route aggregation.
9. Normative References
[RFC2574] Blumenthal, U., and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management Proto-
col (SNMPv3)", RFC 2574, April 1999.
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Structure of Management Infor-
mation Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Textual Conventions for
SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M., and S. Waldbusser, "Conformance Statements for
SMIv2", STD 58, RFC 2580, April 1999.
[RFC3411] D. Harrington, R. Presuhn, B. Wijnen, "An Architecture for
Describing Simple Network Management Protocol (SNMP) Manage-
ment Frameworks", RFC 3411, December 2002.
[RFC3413] D. Levi, P. Meyer, B. Stewart, "Simple Network Management
Protocol (SNMP) Applications", RFC 3413, December 2002.
[RFC3415] B. Wijnen, R. Presuhn, K. McCloghrie, "View-based Access
Control Model (VACM) for the Simple Network Management Pro-
tocol (SNMP)", RFC 3415, December 2002.
Various Authors Expires January 12, 2006 [Page 95]
Internet Draft BGP-MIB v2 July 13, 2005
[RFC3416] Presuhn, R., Editor, "Version 2 of the Protool Operations
for the Simple Network Management Protocol (SNMP)", RFC
3416, December 2002.
[RFC3417] Presuhn, R., Editor, "Transport Mappings for the Simple Net-
work Management Protocol (SNMP)", RFC 3417, December 2002.
[RFC1213] McCloghrie, K. and M. Rose, Editors, "Management Information
Base for Network Management of TCP/IP-based Internets: MIB-
II", STD 17, RFC 1213, Hughes LAN Systems, Performance Sys-
tems International, March 1991.
[RFC1657] Willis, S., Burruss, J., and Chu, J., "Definitions of Man-
aged Objects for the Fourth Version of the Border Gateway
Protocol (BGP-4) using SMIv2", RFC 1657, July 1994.
[MIB-DRAFT] Hares, S., Haas, J., Willis, S., Burruss, J., and Chu, J.,
"Definitions of Managed Objects for the Fourth Version of
Border Gateway Protocol (BGP-4)", draft-ietf-idr-
bgp4-mib-06.txt, Work-in-progress.
[RFC1771] Rekhter, Y., Li, T., "A Border Gateway Protocol 4 (BGP-4)",
RFC 1771, March 1995.
[RFC1772] Rekhter, Y., Gross, P., "Application of the Border Gateway
Protocol in the Internet", RFC 1772, March 1995.
[RFC3065] Traina, P., McPherson, D., and Scudder, J., "Autonomous Sys-
tem Confederations for BGP", RFC 3065, February, 2001.
[RFC1997] Chandra, R., Traina, P., and Li, T., "BGP Communities
Attribute", RFC 1997, August, 1996.
[RFC2858] Bates, T., Rekhter, Y., Chandra, R., and Katz, D., "Multi-
protocol Extensions for BGP-4", RFC 2858, June, 2000.
[RFC2796] Bates, T., Chandra, R., and Chen, E., "BGP Route Reflection
- An Alternative to Full Mesh IBGP", RFC 2796, April 2000.
[BGP-EXTCOMM] Sangli, S., Tappan, D., and Rekhter, Y., "BGP Extended
Communities Attribute", Work-in-progress.
[RFC3107] Rehkter, Y., and Rosen, E., "Carrying Label Information in
BGP-4", RFC 3107, May 2001.
Various Authors Expires January 12, 2006 [Page 96]
Internet Draft BGP-MIB v2 July 13, 2005
10. Informative References
[RFC1901] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Introduction to Community-based SNMPv2", RFC 1901, January
1996.
[RFC2576] Frye, R., Levi, D., Routhier, S. and B. Wijnen, "Coexistence
between Version 1, Version 2, and Version 3 of the Internet-
Standard Network Management Framework", RFC 2576, March
2000.
[RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart, "Introduc-
tion and Applicability Statements for Internet- Standard
Management Framework", RFC 3410, December 2002.
11. Authors' Addresses
Jeff Haas
NextHop Technologies
825 Victors Way, Suite 100
Ann Arbor, MI 48108
Phone: +1 734 222-1600
Fax: +1 734 222-1602
Email: jhaas@nexthop.com
Susan Hares
NextHop Technologies
825 Victors Way, Suite 100
Ann Arbor, MI 48108
Phone: +1 734 222-1600
Fax: +1 734 222-1602
Email: skh@nexthop.com
Wayne Tackabury
Gold Wire Technology
411 Waverley Oaks Rd.
Waltham, MA 02452-8401
Phone: +1 781 398-8819
Fax: +1 781 398-8811
Email: wayne@goldwiretech.com
12. Full Copyright Statement
Copyright (C) The Internet Society (2005).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
Various Authors Expires January 12, 2006 [Page 97]
Internet Draft BGP-MIB v2 July 13, 2005
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.1. Protocol Extensions . . . . . . . . . . . . . . . . . . . . . . 3
2.2. Mechanisms for MIB Extensibility . . . . . . . . . . . . . . . 3
2.3. BGP Configuration . . . . . . . . . . . . . . . . . . . . . . . 3
3. MIB Organization . . . . . . . . . . . . . . . . . . . . . . . . 4
3.1. bgpM2BaseScalars . . . . . . . . . . . . . . . . . . . . . . . 4
3.2. bgpM2PeerData . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.2.1. bgpM2PeerCapabilities . . . . . . . . . . . . . . . . . . . . 6
3.2.2. bgpM2PeerCounters . . . . . . . . . . . . . . . . . . . . . . 6
3.2.3. Peering Data Extensions . . . . . . . . . . . . . . . . . . . 6
3.2.4. Configuring Peering Sessions . . . . . . . . . . . . . . . . 6
3.3. BGP Routing Information Base Data . . . . . . . . . . . . . . . 7
3.3.1. Routing Information Base Extensions . . . . . . . . . . . . . 8
3.4. Considerations on Table Indexing . . . . . . . . . . . . . . . 9
4. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5. Intellectual Property Rights . . . . . . . . . . . . . . . . . . 92
6. Security Considerations . . . . . . . . . . . . . . . . . . . . . 92
7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 93
8. Changes From Last Version . . . . . . . . . . . . . . . . . . . . 93
9. Normative References . . . . . . . . . . . . . . . . . . . . . . 95
10. Informative References . . . . . . . . . . . . . . . . . . . . . 97
11. Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 97
12. Full Copyright Statement . . . . . . . . . . . . . . . . . . . . 97
Various Authors Expires January 12, 2006 [Page 98]
| PAFTECH AB 2003-2026 | 2026-04-21 21:45:30 |