One document matched: draft-ietf-eai-pop-05.txt
Differences from draft-ietf-eai-pop-04.txt
Network Working Group C. Newman
Internet-Draft Sun Microsystems
Updates: 1939 (if approved) R. Gellens
Intended status: Experimental QUALCOMM Incorporated
Expires: May 24, 2009 November 20, 2008
POP3 Support for UTF-8
draft-ietf-eai-pop-05.txt
Status of this Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on May 24, 2009.
Copyright Notice
Copyright (C) The IETF Trust (2008).
Abstract
This specification extends the Post Office Protocol version 3 (POP3)
to support un-encoded international characters in user names,
passwords, mail addresses, message headers, and protocol-level
textual error strings.
Newman & Gellens Expires May 24, 2009 [Page 1]
Internet-Draft POP3 Support for UTF-8 November 2008
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. Conventions Used in this Document . . . . . . . . . . . . 3
1.2. Change History . . . . . . . . . . . . . . . . . . . . . . 3
1.2.1. Changes from -04 to -05 . . . . . . . . . . . . . . . 3
1.2.2. Changes from -03 to -04 . . . . . . . . . . . . . . . 4
1.2.3. Changes from -02 to -03 . . . . . . . . . . . . . . . 4
1.2.4. Changes from -01 to -02 . . . . . . . . . . . . . . . 5
1.2.5. Changes from -00 to -01 . . . . . . . . . . . . . . . 5
1.2.6. Changes from draft-newman-ima-pop . . . . . . . . . . 5
1.3. Open Issues . . . . . . . . . . . . . . . . . . . . . . . 5
2. LANG Capability . . . . . . . . . . . . . . . . . . . . . . . 5
3. UTF8 Capability . . . . . . . . . . . . . . . . . . . . . . . 8
3.1. The UTF8 Command . . . . . . . . . . . . . . . . . . . . . 8
3.2. USER Argument to UTF8 Capability . . . . . . . . . . . . . 9
4. Issues with UTF-8 Header maildrop . . . . . . . . . . . . . . 10
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 10
6. Security Considerations . . . . . . . . . . . . . . . . . . . 10
7. References . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7.1. Normative References . . . . . . . . . . . . . . . . . . . 11
7.2. Informative References . . . . . . . . . . . . . . . . . . 11
Appendix A. Design Rationale . . . . . . . . . . . . . . . . . . 12
Appendix B. Acknowledgments . . . . . . . . . . . . . . . . . . . 12
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 12
Intellectual Property and Copyright Statements . . . . . . . . . . 14
Newman & Gellens Expires May 24, 2009 [Page 2]
Internet-Draft POP3 Support for UTF-8 November 2008
1. Introduction
This specification extends POP3 [RFC1939] using the POP3 Extension
Mechanism [RFC2449] to permit un-encoded UTF-8 [RFC3629] in headers
as described in Internationalized Email Headers [RFC5335]. It also
adds a mechanism to support login names outside the ASCII character
set, and a mechanism to support UTF-8 protocol-level error strings in
a language appropriate for the user.
Within this specification, the term down-conversion refers to the
process of modifying a message containing UTF8 headers [RFC5335] or
body parts with 8bit content-transfer-encoding as defined in MIME
section 2.8 [RFC2045] into conforming 7-bit Internet Message Format
[RFC5322] with Message Header Extensions for Non-ASCII Text [RFC2047]
and other 7-bit encodings. Down-conversion is specified by
Downgrading mechanism for Email Address Internationalization
[I-D.ietf-eai-downgrade].
1.1. Conventions Used in this Document
The key words "MUST", "MUST NOT", "SHOULD", "SHOULD NOT", and "MAY"
in this document are to be interpreted as defined in "Key words for
use in RFCs to Indicate Requirement Levels" [RFC2119].
The formal syntax uses the Augmented Backus-Naur Form (ABNF)
[RFC5234] notation including the core rules defined in Appendix B of
RFC 5234.
In examples, "C:" and "S:" indicate lines sent by the client and
server respectively. If a single "C:" or "S:" label applies to
multiple lines, then the line breaks between those lines are for
editorial clarity only and are not part of the actual protocol
exchange.
1.2. Change History
This section describes the change history of this Internet draft and
will be removed when/if this is published as an RFC.
1.2.1. Changes from -04 to -05
o Downgrading is back to an informative, not normative reference,
and is suggested as a good idea but explicitly not required.
o Language listing now specifies that the human-readable description
of a language is in the language itself.
Newman & Gellens Expires May 24, 2009 [Page 3]
Internet-Draft POP3 Support for UTF-8 November 2008
o Updated 2822 reference to 5322, made text "Internet Message
Format".
o Updated reference to utf8headers draft to RFC5335.
o Updated reference to RFC4234 to RFC5234.
1.2.2. Changes from -03 to -04
o Specified that it is an error to issue STLS after UTF8.
o Removed prior open issues.
o Downgrading added as open issue.
1.2.3. Changes from -02 to -03
o Updated references.
o Replaced US-ASCII with ASCII.
o Added comment to language listing failure example.
o Replaced RET8, LST8, and TOP8 commands with a single mode-switch
UTF8 command issued before authentication. This simplifies the
protocol, and allows servers to optionally down-convert a cache of
the maildrop prior to issuing the +OK response entering
TRANSACTION state.
o Removed most up-conversion material.
o Removed definition of up-conversion.
o Removed IMAP4 reference.
o Added AUTH command to those affected by UTF8 capability.
o Removed LST8 and TOP8 capability parameters and commands.
o Removed NO-RETR capability. POP servers are now unconditionally
required to support down-conversion of UTF8-native maildrops.
o Added sentence about modifying authentication code to Security
Considerations.
o eai-downgrade draft is now normative and required.
Newman & Gellens Expires May 24, 2009 [Page 4]
Internet-Draft POP3 Support for UTF-8 November 2008
o Deleted references to RFCs 1341, 1847, 2049, 2183, 3501, 3516, and
3490.
1.2.4. Changes from -01 to -02
o Minor grammatical tweaks.
o Add passwords to Abstract.
o Removed new editor's name from Acknowledgments.
1.2.5. Changes from -00 to -01
o Update references
1.2.6. Changes from draft-newman-ima-pop
o Change title to make this a WG document.
o Add LANG command and extension.
o Rename RET8 capability to UTF8 and add sub-sections for arguments.
o Add TOP8 command.
o Add definition of up-conversion and down-conversion.
o Some grammar fix-ups and section re-ordering based on RFC editor
style.
1.3. Open Issues
1. How should downgrading (Section 3.1) be handled?
2. LANG Capability
CAPA tag:
LANG
Arguments:
none
Added Commands:
LANG
Newman & Gellens Expires May 24, 2009 [Page 5]
Internet-Draft POP3 Support for UTF-8 November 2008
Standard commands affected:
All
Announced states / possible differences:
both / no
Commands valid in states:
AUTHENTICATION, TRANSACTION
Specification reference:
this document
Discussion:
POP3 allows most +OK and -ERR server responses to include human-
readable text that in some cases needs to be presented to the user.
But that text is limited to ASCII by the POP3 specification
[RFC1939]. The LANG capability and command permit a POP3 client to
negotiate which language the server should use when sending human-
readable text.
A server that advertises the LANG extension MUST use the language
"i-default" as described in [RFC2277] as its default language until
another supported language is negotiated by the client. A server
MUST include "i-default" as one of its supported languages.
The LANG command requests that human-readable text included in all
subsequent +OK and -ERR responses be localized to a language matching
the language range argument as described by [RFC4647]. If the
command succeeds, the server returns a +OK response followed by a
single space, the exact language tag selected, another space, and the
rest of the line is human-readable text in the appropriate language.
This and subsequent protocol-level human readable text is encoded in
the UTF-8 charset.
If the command fails, the server returns an -ERR response and
subsequent human-readable response text continues to use the language
that was previously active (typically i-default).
The special "*" language range argument indicates a request to use a
language designated as preferred by the server administrator. The
preferred language MAY vary based on the currently active user.
If no argument is given and the POP3 server issues a positive
response, then the response given is multi-line. After the initial
+OK, for each language tag the server supports, the POP3 server
responds with a line for that language. This line is called a
"language listing".
Newman & Gellens Expires May 24, 2009 [Page 6]
Internet-Draft POP3 Support for UTF-8 November 2008
In order to simplify parsing, all POP3 servers are required to use a
certain format for language listings. A language listing consists of
the language tag [RFC4646] of the message, optionally followed by a
single space and a human readable description of the language in the
language itself, using the UTF-8 charset.
< The server defaults to using English i-default responses until
the client explicitly changes the language. >
C: USER karen
S: +OK Hello, karen
C: PASS password
S: +OK karen's maildrop contains 2 messages (320 octets)
< Client requests depricated MUL language. Server replies
with -ERR response >
C: LANG MUL
S: -ERR invalid language MUL
< A LANG command with no arguments is a request for
a language listing. >
C: LANG
S: +OK Language listing follows:
S: en English
S: en-boont English Boontling dialect
S: de Deutsch
S: it Italiano
S: i-default Default language
S: .
< A request for a language listing might fail >
C: LANG
S: -ERR Server is unable to list languages
< Once the client changes the language, all responses will be in
that language starting with the response to the LANG command.
Note: the example does not include the correct character accents
due to limitations of this document format. >
C: LANG fr
S: +OK fr La Language commande a ete execute avec success
< If a server does not support the requested primary language,
responses will continue to be returned in the current language
the server is using. >
Newman & Gellens Expires May 24, 2009 [Page 7]
Internet-Draft POP3 Support for UTF-8 November 2008
C: LANG uga
S: -ERR Ce Language n'est pas supporte
C: LANG fr-ca
S: +OK fr La Language commande a ete execute avec success
C: LANG *
S: +OK fr La Language commande a ete execute avec success
Examples
3. UTF8 Capability
CAPA tag:
UTF8
Arguments:
USER, LIST, TOP
Added Commands:
UTF8
Standard commands affected:
AUTH, USER, PASS, APOP, LIST, TOP, RETR
Announced states / possible differences:
both / no
Commands valid in states:
AUTHORIZATION
Specification reference:
this document
Discussion:
This capability adds the "UTF8" command to POP3. The UTF8 command
switches the session from ASCII to UTF8 mode.
3.1. The UTF8 Command
The UTF8 command enables UTF8 mode. Maildrops can natively store
UTF8 or be limited to ASCII. UTF8 mode has no effect on messages in
an ACII-only maildrop. Messages in native-UTF8 maildrops can be
ASCII or UTF8 using internationalized headers [RFC5335] and/or 8bit
content-transfer-encoding as defined in MIME section 2.8 [RFC2045].
In UTF8 mode, both UTF8 and ASCII messages are sent to the client
Newman & Gellens Expires May 24, 2009 [Page 8]
Internet-Draft POP3 Support for UTF-8 November 2008
as-is (without conversion). When not in UTF8 mode, UTF8 messages in
a native UTF8 maildrop MUST be down-converted (downgraded) to comply
with unextended POP and Internet Mail Format. POP servers (unlike
SMTP and Submit servers) are not required to use Downgrading
mechanism for Email Address Internationalization
[I-D.ietf-eai-downgrade].
The main argument against a single required mechanism for downgrade
by a POP server is that the only clients that have any use for a
standardized downgraded message (because they wish to interpret
downgrade headers, for example) are ones that can support UTF8 and
hence will issue the UTF8 command in the first place. The counter
argument to this is that non-UTF8 clients might be upgraded in the
future; it's desirable for an upgraded client to be capable of
interpreting prior downgraded messages, which is most likely if the
messages were downgraded using one standardized procedure.
Therefore, while POP servers are not required to use the Downgrading
mechanism for Email Address Internationalization
[I-D.ietf-eai-downgrade], there are advantages to them doing so.
Note that even in UTF8 mode, MIME binary content-transfer-encoding is
still not permitted.
The octet count (size) of a message reported in a response to the
LIST command SHOULD match what the server sends in a RETR response.
Sizes reported elsewhere, such as in STAT responses and free-form
text in positive status indicators (following "+OK") need not be
accurate, but it is preferable if they are.
Clients MUST NOT issue the STLS command [RFC2595] after issuing UTF8;
servers MAY (but are not required to) enforce this by rejecting with
an "-ERR" response an STLS command issued subsequent to a successful
UTF8 command. (Because this is a protocol error as opposed to a
failure based on conditions, an extended response code [RFC2449] is
not specified.)
3.2. USER Argument to UTF8 Capability
If the USER argument is included with this capability, it indicates
that the server accepts UTF-8 user names and passwords and applies
SASLprep [RFC4013] to the arguments of the AUTH, USER, PASS and APOP
commands. A client that supports APOP and permits UTF-8 in user
names or passwords MUST also implement SASLprep [RFC4013] on the user
name and password used to compute the APOP digest.
The client does not need to issue the UTF8 command prior to using
UTF8 in authentication. However, clients MUST NOT use UTF8 in USER,
Newman & Gellens Expires May 24, 2009 [Page 9]
Internet-Draft POP3 Support for UTF-8 November 2008
PASS, or APOP commands unless the USER argument is included with the
UTF8 capability.
Use of UTF8 in the AUTH command is governed by the SASL mechanism.
4. Issues with UTF-8 Header maildrop
When a POP3 server uses a UTF8-native maildrop, it is the
responsibility of the server to comply with the POP3 base
specification [RFC1939] and Internet Message Format [RFC5322] when
not in UTF8 mode. Mechanisms for 7-bit downgrading to help comply
with the standards are described in Downgrading mechanism for Email
Address Internationalization [I-D.ietf-eai-downgrade].
5. IANA Considerations
This adds two new capabilities ("UTF8" and "LANG") to the POP3
capability registry [RFC2449].
6. Security Considerations
The security considerations of UTF-8 [RFC3629] and SASLprep [RFC4013]
apply to this specification, particularly with respect to use of
UTF-8 in user names and passwords.
The "LANG *" command can reveal the existence and preferred language
of a user to an active attacker probing the system if the active
language changes in response to the USER, PASS, or APOP commands
prior to validating the user's credentials. Servers MUST implement a
configuration to prevent this exposure.
It is possible for a man-in-the-middle attacker to insert a LANG
command in the command stream thus making protocol-level diagnostic
responses unintelligible to the user. A mechanism to integrity
protect the session, such as TLS [RFC2595] can be used to defeat such
attacks.
Modifying server authentication code (in this case, to support UTF8)
needs to be done with care to avoid introducing vulnerabilities (for
example, in string parsing).
7. References
Newman & Gellens Expires May 24, 2009 [Page 10]
Internet-Draft POP3 Support for UTF-8 November 2008
7.1. Normative References
[RFC1939] Myers, J. and M. Rose, "Post Office Protocol - Version 3",
STD 53, RFC 1939, May 1996.
[RFC2045] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part One: Format of Internet Message
Bodies", RFC 2045, November 1996.
[RFC2047] Moore, K., "MIME (Multipurpose Internet Mail Extensions)
Part Three: Message Header Extensions for Non-ASCII Text",
RFC 2047, November 1996.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2277] Alvestrand, H., "IETF Policy on Character Sets and
Languages", BCP 18, RFC 2277, January 1998.
[RFC2449] Gellens, R., Newman, C., and L. Lundblade, "POP3 Extension
Mechanism", RFC 2449, November 1998.
[RFC5322] Resnick, P., Ed., "Internet Message Format", RFC 5322,
October 2008.
[RFC4646] Phillips, A. and M. Davis, "Tags for Identifying
Languages", BCP 47, RFC 4646, September 2006.
[RFC4647] Phillips, A. and M. Davis, "Matching of Language Tags",
BCP 47, RFC 4647, September 2006.
[RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO
10646", STD 63, RFC 3629, November 2003.
[RFC4013] Zeilenga, K., "SASLprep: Stringprep Profile for User Names
and Passwords", RFC 4013, February 2005.
[RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234, January 2008.
[RFC5335] Abel, Y., "Internationalized Email Headers", RFC 5335,
September 2008.
7.2. Informative References
[RFC2595] Newman, C., "Using TLS with IMAP, POP3 and ACAP",
RFC 2595, June 1999.
Newman & Gellens Expires May 24, 2009 [Page 11]
Internet-Draft POP3 Support for UTF-8 November 2008
[I-D.ietf-eai-downgrade]
Yoneya, Y. and K. Fujiwara, "Downgrading mechanism for
Email Address Internationalization (EAI)",
draft-ietf-eai-downgrade-09 (work in progress), Sep 2008.
Appendix A. Design Rationale
This non-normative section discusses the reasons behind some of the
design choices in the above specification.
Having servers perform up-conversion so that, at a minimum, RFC2047-
encoded words are decoded into UTF8 is tempting, since this is an
area that clients often fail to correctly implement. However,
modifying messages breaks digital signatures, and would require
servers to support arbitrary charset conversion.
USER is optional because the implementation burden of SASLprep
[RFC4013] is not well understood and mandating such support in all
cases could negatively impact deployment.
Due to interoperability problems with RFC 2047 and limited deployment
of RFC 2231, it is hoped these 7-bit encoding mechanisms can be
deprecated in the future when UTF-8 header support becomes prevalent.
While it is possible to provide useful examples for language
negotiation without support for non-ASCII characters, it is difficult
to provide useful examples for commands specifically designed to use
the UTF-8 charset un-encoded when the document format is limited to
ASCII. As a result, there are no plans to provide examples for that
part of the specification as long as this remains an experimental
proposal. However, implementers of this specification are encouraged
to provide examples to the document author for a future revision.
Appendix B. Acknowledgments
Thanks to John Klensin, Tony Hansen and other EAI working group
participants who provided helpful suggestions and interesting debate
that improved this specification.
Newman & Gellens Expires May 24, 2009 [Page 12]
Internet-Draft POP3 Support for UTF-8 November 2008
Authors' Addresses
Chris Newman
Sun Microsystems
800 Royal Oaks
Monrovia, CA 91016-6347
US
Email: chris.newman@sun.com
Randall Gellens
QUALCOMM Incorporated
5775 Morehouse Drive
San Diego, CA 92651
US
Email: rg+ietf@qualcomm.com
Newman & Gellens Expires May 24, 2009 [Page 13]
Internet-Draft POP3 Support for UTF-8 November 2008
Full Copyright Statement
Copyright (C) The IETF Trust (2008).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgment
Funding for the RFC Editor function is provided by the IETF
Administrative Support Activity (IASA).
Newman & Gellens Expires May 24, 2009 [Page 14]
| PAFTECH AB 2003-2026 | 2026-04-24 02:46:22 |