One document matched: draft-ietf-bfd-mib-01.txt
Differences from draft-ietf-bfd-mib-00.txt
BFD Working Group Thomas D. Nadeau
Standard Track Zafar Ali
Cisco Systems, Inc.
Document: draft-ietf-bfd-mib-01.txt
Expires: January 2006 July 2005
Bidirectional Forwarding Detection Management Information Base
draft-ietf-bfd-mib-01.txt
Status of this Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
Abstract
This draft defines a portion of the Management Information Base
(MIB) for use with network management protocols in the Internet
community. In particular, it describes managed objects for modeling
Bidirectional Forwarding Detection (BFD) protocol [BFD].
Conventions used in this document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL
NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in
this document are to be interpreted as described in RFC 2119
[RFC2119].
SUMMARY
This draft defines Management Information Base (MIB) for
BFD Working Group Expires January 2005 [Page 1]
Internet Draft BFD-DRAFT-01-MIB July 2004
Bidirectional Forwarding Detection (BFD) protocol [BFD].
RELATED REFERENCES
Please refer to the reference section.
Table of Contents
1. Introduction...................................................2
2. Terminology....................................................3
3. The Internet-Standard Management Framework.....................3
3. Brief Description of MIB Objects...............................3
3.1 General Variables..........................................3
3.2 Session Table (bfdSessionTable)............................3
3.3 Session Performance Table (bfdSessionPerfTable)............3
3.4 Session Mapping Table (bfdSessMapTable)....................3
4. BFD MIB Module Definitions.....................................4
5. Security Considerations.......................................21
6. Acknowledgements..............................................22
7. Reference.....................................................23
7.1 Normative References.........................................23
7.2 Informative References.......................................23
8. Author's Addresses............................................23
9. Full Copyright Statement......................................24
10. IANA Considerations.........................................41
10.1. IANA Considerations for BFD-STD-MIB.......................41
11. Intellectual Property Statement.............................41
1. Introduction
This memo defines an portion of the Management
Information Base (MIB) for use with network management protocols
in the Internet community. In particular, it describes managed
objects to configure and/or monitor Bi-Directional Forwarding
Detection on devices supporting this feature.
This document adopts the definitions, acronyms and mechanisms
described in [BFD], [BFD-SHARED] and [BFD-LSP]. Unless otherwise
stated, the mechanisms described therein will not be re-described
here.
Comments should be made directly to the BFD mailing list at
rtg-bfd@ietf.org.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL
NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
[RFC2119].
BFD Working Group Expires January 2005 [Page 2]
Internet Draft BFD-DRAFT-01-MIB July 2004
2. Terminology
This document adopts the definitions, acronyms and mechanisms
described in [BFD], [BFD-SHARED] and [BFD-LSP]. Unless otherwise
stated, the mechanisms described therein will not be re-described
here.
3. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580].
4. Brief Description of MIB Objects
This section describes objects pertaining to BFD. The MIB objects
are derived from the BFD document [BFD].
4.1 General Variables
The General Variables are used to identify parameters that are
global to the BFD process.
4.2 Session Table (bfdSessionTable)
The session table is used to identify a BFD session between a pair
of nodes.
4.3 Session Performance Table (bfdSessionPerfTable)
The session performance table is used for collecting BFD
performance counts on a per session basis. This table is an AUGMENT
to the bfdSessionTable.
3.4 Session Mapping Table (bfdSessMapTable)
The BFD Session Mapping Table maps the complex indexing of the BFD
sessions to the flat BFDIndex used in the BfdSessionTable.
BFD Working Group Expires January 2005 [Page 3]
Internet Draft BFD-DRAFT-01-MIB July 2004
5. BFD MIB Module Definitions
BFD-DRAFT-01-MIB DEFINITIONS ::= BEGIN
-- RFC-editor pls change BFD-DRAFT-*-MIB to
-- BFD-STD-MIB
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32, Counter32, Counter64,
NOTIFICATION-TYPE, mib-2
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION, TruthValue, RowStatus, StorageType,
TimeStamp
FROM SNMPv2-TC
InetAddress, InetAddressType, InetPortNumber
FROM INET-ADDRESS-MIB
;
bfdMIB MODULE-IDENTITY
LAST-UPDATED "200507221200Z" -- 04 July 2005 12:00:00 EST
ORGANIZATION "IETF"
CONTACT-INFO
" Thomas D. Nadeau
Cisco Systems, Inc.
Email: tnadeau@cisco.com
Zafar Ali
Cisco Systems, Inc.
Email: zali@cisco.com
"
DESCRIPTION
"Bidirectional Forwarding Management Information Base."
-- Revision history.
REVISION
"200507221200Z" -- 04 July 2005 12:00:00 EST
DESCRIPTION
"Initial version. Published as RFC xxxx." -- RFC-editor pls fill
-- in xxx
::= { mib-2 XXX } -- assigned by IANA, see section 18.1 for details
-- Top level components of this MIB module.
BFD Working Group Expires January 2005 [Page 4]
Internet Draft BFD-DRAFT-01-MIB July 2004
bfdNotifications OBJECT IDENTIFIER ::= { bfdMIB 0 }
bfdObjects OBJECT IDENTIFIER ::= { bfdMIB 1 }
bfdConformance OBJECT IDENTIFIER ::= { bfdMIB 3 }
bfdScalarObjects OBJECT IDENTIFIER ::= { bfdObjects 1 }
-- Textual Conventions
BfdSessIndexTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An index used to uniquely identify BFD sessions."
SYNTAX Unsigned32 (1..4294967295)
BfdInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The BFD interval delay in microseconds."
SYNTAX Unsigned32 (1..4294967295)
BfdDiag ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A common BFD diagnostic code."
SYNTAX INTEGER { noDiagnostic(1),
controlDetectionTimeExpired(2),
echoFunctionFailed(3),
neighborSignaledSessionDown(4),
forwardingPlaneReset(5),
pathDown(6),
concatenatedPathDown(7),
administrativelyDown(8),
reverseConcatenatedPathDown (9)
}
-- BFD General Variables
-- These parameters apply globally to the Router's
-- BFD Process.
bfdAdminStatus OBJECT-TYPE
BFD Working Group Expires January 2005 [Page 5]
Internet Draft BFD-DRAFT-01-MIB July 2004
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The global administrative status of BFD in this router.
The value 'enabled' denotes that the BFD Process is
active on at least one interface; 'disabled' disables
it on all interfaces."
DEFVAL { enabled }
::= { bfdScalarObjects 1 }
bfdVersionNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current version number of the BFD protocol."
REFERENCE
" BFD Version 0 (draft-katz-ward-bfd-02.txt)"
DEFVAL { 0 }
::= { bfdScalarObjects 3 }
-- BFD Session Table
-- The BFD Session Table specifies BFD session specific
-- information.
bfdSessTable OBJECT-TYPE
SYNTAX SEQUENCE OF BfdSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Table describes the BFD sessions."
REFERENCE
"BFD Version 0 (draft-katz-ward-bfd-02.txt)"
::= { bfdObjects 2 }
bfdSessEntry OBJECT-TYPE
SYNTAX BfdSessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Entry describes BFD session."
INDEX { bfdSessIndex }
::= { bfdSessTable 1 }
BfdSessEntry ::= SEQUENCE {
bfdSessIndex BfdSessIndexTC,
BFD Working Group Expires January 2005 [Page 6]
Internet Draft BFD-DRAFT-01-MIB July 2004
bfdSessApplicationId Unsigned32,
bfdSessDiscriminator Unsigned32,
bfdSessRemoteDiscr Unsigned32,
bfdSessUdpPort InetPortNumber,
bfdSessState INTEGER,
bfdSessRemoteHeardFlag TruthValue,
bfdSessDiag Unsigned32,
bfdSessOperMode INTEGER,
bfdSessDemandModeDesiredFlag TruthValue,
bfdSessEchoFuncModeDesiredFlag TruthValue,
bfdSessControlPlanIndepFlag TruthValue,
bfdSessAddrType InetAddressType,
bfdSessAddr InetAddress,
bfdSessDesiredMinTxInterval BfdInterval,
bfdSessDesiredMinRxInterval BfdInterval,
bfdSessDesiredMinEchoRxInterval BfdInterval,
bfdSessDetectMult Unsigned32,
bfdSessStorType StorageType,
bfdSessRowStatus RowStatus,
bfdSessAuthPresFlag TruthValue,
bfdSessAuthenticationType INTEGER
}
bfdSessIndex OBJECT-TYPE
SYNTAX BfdSessIndexTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object contains an index used to represent a
unique BFD session on this device."
::= { bfdSessEntry 1 }
bfdSessApplicationId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an index used to indicate
a local application which owns or maintains this
BFD session. For instance, the MPLS VPN process may
maintain a subset of the total number of BFD
sessions. This application ID provides a convenient
way to segregate sessions by the applications which
maintain them."
::= { bfdSessEntry 2 }
bfdSessDiscriminator OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
BFD Working Group Expires January 2005 [Page 7]
Internet Draft BFD-DRAFT-01-MIB July 2004
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the local discriminator for this BFD
session, used to uniquely identify it."
::= { bfdSessEntry 3 }
bfdSessRemoteDiscr OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the session discriminator chosen
by the remote system for this BFD session."
::= { bfdSessEntry 4 }
bfdSessUdpPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The UDP Port for BFD. The default value is the
well-known value for this port."
REFERENCE
"draft-katz-ward-bfd-02.txt and
draft-raggarwa-mpls-bfd-00.txt"
DEFVAL { 0 }
::= { bfdSessEntry 5 }
bfdSessState OBJECT-TYPE
SYNTAX INTEGER {
adminDown(1),
down(2),
init(3),
up(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The perceived state of the BFD session."
::= { bfdSessEntry 6 }
bfdSessRemoteHeardFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies status of BFD packet reception from
BFD Working Group Expires January 2005 [Page 8]
Internet Draft BFD-DRAFT-01-MIB July 2004
the remote system. Specifically, it is set to true(1) if
the local system is actively receiving BFD packets from the
remote system, and is set to false(0) if the local system
has not received BFD packets recently (within the detection
time) or if the local system is attempting to tear down
the BFD session."
::= { bfdSessEntry 7 }
bfdSessDiag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A diagnostic code specifying the local system's reason
for the last transition of the session from up(1)
to some other state."
::= { bfdSessEntry 8 }
bfdSessOperMode OBJECT-TYPE
SYNTAX INTEGER { asyncModeWEchoFun(1),
asynchModeWOEchoFun(2),
demandModeWEchoFunction(3),
demandModeWOEchoFunction(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies current operating mode that BFD
session is operating in.
A value of AsyncModeWEchoFun(1) ...
A value of AsynchModeWOEchoFun(2) ...
A value of DemandModeWEchoFunction(3) ...
A value of DemandModeWOEchoFunction(4) ...
"
::= { bfdSessEntry 9 }
bfdSessDemandModeDesiredFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates that the local system's
desire to use Demand mode. Specifically, it is set
to true(1) if the local system wishes to use
Demand mode or false(0) if not"
DEFVAL { false }
::= { bfdSessEntry 10 }
BFD Working Group Expires January 2005 [Page 9]
Internet Draft BFD-DRAFT-01-MIB July 2004
bfdSessEchoFuncModeDesiredFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates that the local system's
desire to use Echo mode. Specifically, it is set
to true(1) if the local system wishes to use
Echo mode or false(0) if not"
DEFVAL { false }
::= { bfdSessEntry 11 }
bfdSessControlPlanIndepFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates that the local system's
ability to continue to function through a disruption of
the control plane. Specifically, it is set
to true(1) if the local system BFD implementation is
independent of the control plane. Otherwise, the
value is set to false(0)"
DEFVAL { false }
::= { bfdSessEntry 12 }
bfdSessAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies IP address of the interface
associated with this BFD session.
Only values unknown(0), ipv4(1) or ipv6(2)
have to be supported.
A value of unknown(0) is allowed only when
the outgoing interface is of type point-to-point, or
when the BFD session is not associated with a specific
interface.
If any other unsupported values are attempted in a set
operation, the agent MUST return an inconsistentValue
error.
"
::= { bfdSessEntry 13 }
BFD Working Group Expires January 2005 [Page 10]
Internet Draft BFD-DRAFT-01-MIB July 2004
bfdSessAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies IP address of the interface
associated with this BFD session.
It can also be used to enabled BFD on a specific
interface. The value is set to zero when BFD session is not
associated with a specific interface. "
::= { bfdSessEntry 14 }
bfdSessDesiredMinTxInterval OBJECT-TYPE
SYNTAX BfdInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in
microseconds, that the local system would like to use when
transmitting BFD Control packets."
::= { bfdSessEntry 15 }
bfdSessDesiredMinRxInterval OBJECT-TYPE
SYNTAX BfdInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in
microseconds, between received BFD Control packets the
local system is capable of supporting."
::= { bfdSessEntry 16 }
bfdSessDesiredMinEchoRxInterval OBJECT-TYPE
SYNTAX BfdInterval
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the minimum interval, in
microseconds, between received BFD Echo packets that this
system is capable of supporting."
::= { bfdSessEntry 17 }
bfdSessDetectMult OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
BFD Working Group Expires January 2005 [Page 11]
Internet Draft BFD-DRAFT-01-MIB July 2004
"This object specifies the Detect time multiplier."
::= { bfdSessEntry 18 }
bfdSessStorType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this
object. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar objects in the row."
::= { bfdSessEntry 19 }
bfdSessRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table has a row in the active(1) state, no
objects in this row can be modified except the
bfdSessRowStatus and bfdSessStorageType."
::= { bfdSessEntry 20 }
bfdSessAuthPresFlag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates that the local system's
desire to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(0) if not"
DEFVAL { false }
::= { bfdSessEntry 21 }
bfdSessAuthenticationType OBJECT-TYPE
SYNTAX INTEGER { simplePassword(1),
keyedMD5(2),
meticulousKeyedMD5(3),
keyedSHA1(4),
meticulousKeyedSHA1(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
BFD Working Group Expires January 2005 [Page 12]
Internet Draft BFD-DRAFT-01-MIB July 2004
"The Authentication Type used for this BFD session. This
field is valid only when the Authentication Present bit is set"
::= { bfdSessEntry 22 }
-- BFD Session Performance Table
bfdSessPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF BfdSessPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies BFD Session performance counters."
::= { bfdObjects 3 }
bfdSessPerfEntry OBJECT-TYPE
SYNTAX BfdSessPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by a BFD-enabled node for
every BFD Session. bfdCounterDiscontinuityTime is used to
indicate potential discontinuity for all counter objects
in this table."
AUGMENTS { bfdSessEntry }
::= { bfdSessPerfTable 1 }
BfdSessPerfEntry ::= SEQUENCE {
bfdSessPerfPktIn Counter32,
bfdSessPerfPktOut Counter32,
bfdSessUpTime TimeStamp,
bfdSessPerfLastSessDownTime TimeStamp,
bfdSessPerfLastCommLostDiag BfdDiag,
bfdSessPerfSessUpCount Counter32,
bfdSessPerfDiscTime TimeStamp,
-- High Capacity Counters
bfdSessPerfPktInHC Counter64,
bfdSessPerfPktOutHC Counter64
}
-- Ed Note: should we add per-diag code counts here,
bfdSessPerfPktIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BFD messages received for this BFD
BFD Working Group Expires January 2005 [Page 13]
Internet Draft BFD-DRAFT-01-MIB July 2004
session."
::= { bfdSessPerfEntry 1 }
bfdSessPerfPktOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BFD messages sent for this BFD session."
::= { bfdSessPerfEntry 2 }
bfdSessUpTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion at which
the session came up. If no such up event exists this object
contains a zero value."
::= { bfdSessPerfEntry 3 }
bfdSessPerfLastSessDownTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion at which
the last time communication was lost with the neighbor. If
no such down event exist this object contains a zero value."
::= { bfdSessPerfEntry 4 }
bfdSessPerfLastCommLostDiag OBJECT-TYPE
SYNTAX BfdDiag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BFD diag code for the last time communication was lost
with the neighbor. If no such down event exists this object
contains a zero value."
::= { bfdSessPerfEntry 5 }
bfdSessPerfSessUpCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this session has gone into the Up
state since the router last rebooted."
BFD Working Group Expires January 2005 [Page 14]
Internet Draft BFD-DRAFT-01-MIB July 2004
::= { bfdSessPerfEntry 6 }
bfdSessPerfDiscTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion at which
any
one or more of the session counters suffered a
discontinuity.
The relevant counters are the specific instances associated
with this BFD session of any Counter32 object contained in
the
BfdSessPerfTable. If no such discontinuities have occurred
since the last re-initialization of the local management
subsystem,
then this object contains a zero value."
::= { bfdSessPerfEntry 7 }
bfdSessPerfPktInHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the total number of BFD messages
received for this BFD session. It MUST be equal to the
least significant 32 bits of bfdSessPerfPktIn
if bfdSessPerfPktInHC is supported according to
the rules spelled out in RFC2863."
::= { bfdSessPerfEntry 8 }
bfdSessPerfPktOutHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the total number of
total number of BFD messages transmitted for this
BFD session. It MUST be equal to the
least significant 32 bits of bfdSessPerfPktIn
if bfdSessPerfPktOutHC is supported according to
the rules spelled out in RFC2863."
::= { bfdSessPerfEntry 9 }
-- BFD Session Mapping Table
BFD Working Group Expires January 2005 [Page 15]
Internet Draft BFD-DRAFT-01-MIB July 2004
bfdSessMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF BfdSessMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Mapping Table maps the complex
indexing of the BFD sessions to the flat
BFDIndex used in the BfdSessionTable.
Implementors need to be aware that if the value of
the bfdSessAddr (an OID) has more
that 111 sub-identifiers, then OIDs of column
instances in this table will have more than 128
sub-identifiers and cannot be accessed using SNMPv1,
SNMPv2c, or SNMPv3.
"
REFERENCE
"BFD Version 0 (draft-katz-ward-bfd-02.txt)"
::= { bfdObjects 4 }
bfdSessMapEntry OBJECT-TYPE
SYNTAX BfdSessMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BFD Session Entry describes BFD session
that is mapped to this index.
Implementors need to be aware that if the value of
the mplsInSegmentMapLabelPtrIndex (an OID) has more
that 111 sub-identifiers, then OIDs of column
instances in this table will have more than 128
sub-identifiers and cannot be accessed using SNMPv1,
SNMPv2c, or SNMPv3."
INDEX { bfdSessApplicationId,
bfdSessDiscriminator,
bfdSessAddrType,
bfdSessAddr
}
::= { bfdSessMapTable 1 }
BfdSessMapEntry ::= SEQUENCE {
bfdSessMapBfdIndex BfdSessIndexTC
}
bfdSessMapBfdIndex OBJECT-TYPE
SYNTAX BfdSessIndexTC
MAX-ACCESS read-only
BFD Working Group Expires January 2005 [Page 16]
Internet Draft BFD-DRAFT-01-MIB July 2004
STATUS current
DESCRIPTION
"This object specifies the BfdIndex referred to by
the indexes of this row. In essence, a mapping is
provided between these indexes and the BfdSessTable."
::= { bfdSessMapEntry 1 }
-- Notification Configuration
bfdSessNotificationsEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this object is set to true(1), then it enables
the emission of bfdSessUp and bfdSessDown
notifications; otherwise these notifications are not
emitted."
REFERENCE
"See also RFC3413 for explanation that
notifications are under the ultimate control of the
MIB modules in this document."
DEFVAL { false }
::= { bfdScalarObjects 4 }
bfdSessUp NOTIFICATION-TYPE
OBJECTS { bfdSessDiag, -- low range value
bfdSessDiag -- high range value
}
STATUS current
DESCRIPTION
"This notification is generated when the
bfdSessState object for one or more contiguous
entries in bfdSessTable are about to enter the up(2)
state from some other state. The included values of
bfdSessDiag MUST both be set equal to this
new state (i.e: up(1)). The two instances of
bfdSessDiag in this notification indicate the range
of indexes that are affected. Note that all the indexes
of the two ends of the range can be derived from the
instance identifiers of these two objects. For the
cases where a contiguous range of sessions
have transitioned into the up(1) state at roughly
the same time, the device SHOULD issue a single
notification for each range of contiguous indexes in
an effort to minimize the emission of a large number
of notifications. If a notification has to be
issued for just a single bfdSessEntry, then
BFD Working Group Expires January 2005 [Page 17]
Internet Draft BFD-DRAFT-01-MIB July 2004
the instance identifier (and values) of the two
bfdSessDiag objects MUST be the identical."
::= { bfdNotifications 1 }
bfdSessDown NOTIFICATION-TYPE
OBJECTS { bfdSessDiag, -- low range value
bfdSessDiag -- high range value
}
STATUS current
DESCRIPTION
"This notification is generated when the
bfdSessState object for one or more contiguous
entries in bfdSessTable are about to enter the down(4)
or adminDown(5) states from some other state. The included
values of bfdSessDiag MUST both be set equal to this
new state (i.e: down(4) or adminDown(5)). The two instances
of bfdSessDiag in this notification indicate the range
of indexes that are affected. Note that all the indexes
of the two ends of the range can be derived from the
instance identifiers of these two objects. For
cases where a contiguous range of sessions
have transitioned into the down(4) or adminDown(5) states
at roughly the same time, the device SHOULD issue a single
notification for each range of contiguous indexes in
an effort to minimize the emission of a large number
of notifications. If a notification has to be
issued for just a single bfdSessEntry, then
the instance identifier (and values) of the two
bfdSessDiag objects MUST be the identical."
::= { bfdNotifications 2 }
-- Ed Note: We need to add notification for changes
-- when the two ends automatically negotiate to a new detection time
-- value or when detection multiplier changes.
-- Similarly, changes in the operating mode (bfdSessOperMode)
-- also need to be notified.
-- Module compliance.
bfdGroups
OBJECT IDENTIFIER ::= { bfdConformance 1 }
bfdCompliances
OBJECT IDENTIFIER ::= { bfdConformance 2 }
-- Compliance requirement for fully compliant implementations.
bfdModuleFullCompliance MODULE-COMPLIANCE
BFD Working Group Expires January 2005 [Page 18]
Internet Draft BFD-DRAFT-01-MIB July 2004
STATUS current
DESCRIPTION "Compliance statement for agents that provide full
support for BFD-MIB. Such devices can
then be monitored and also be configured using
this MIB module."
MODULE -- This module.
MANDATORY-GROUPS {
bfdSessionGroup,
bfdSessionPerfGroup,
bfdSessionPerfHCGroup,
bfdNotificationGroup
}
GROUP bfdSessionPerfHCGroup
DESCRIPTION "This group is mandatory for those bfdPerfTable
entries for which any of the objects
bfdSessPerfPktInHC or bfdSessPerfPktOutHC
wraps around too quickly
based on the criteria specified in RFC 2863 for
high-capacity counters."
GROUP bfdNotificationGroup
DESCRIPTION "This group is only mandatory for those
implementations which can efficiently implement
the notifications contained in this group."
OBJECT bfdSessAddrType
SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support
is required."
OBJECT bfdSessAddr
SYNTAX InetAddress (SIZE(0|4|16))
DESCRIPTION "An implementation is only required to support
unknown(0), ipv4(1) and ipv6(2) sizes."
::= { bfdCompliances 1 }
-- Read-Only Conformance TBD...
-- Units of conformance.
bfdSessionGroup OBJECT-GROUP
OBJECTS {
bfdSessNotificationsEnable,
bfdAdminStatus,
BFD Working Group Expires January 2005 [Page 19]
Internet Draft BFD-DRAFT-01-MIB July 2004
bfdVersionNumber,
bfdSessApplicationId,
bfdSessDiscriminator,
bfdSessAddrType,
bfdSessAddr,
bfdSessRemoteDiscr,
bfdSessUdpPort,
bfdSessState,
bfdSessRemoteHeardFlag,
bfdSessDiag,
bfdSessOperMode,
bfdSessDemandModeDesiredFlag,
bfdSessEchoFuncModeDesiredFlag,
bfdSessControlPlanIndepFlag,
bfdSessDesiredMinTxInterval,
bfdSessDesiredMinRxInterval,
bfdSessDesiredMinEchoRxInterval,
bfdSessDetectMult,
bfdSessStorType,
bfdSessRowStatus,
bfdSessMapBfdIndex,
bfdSessAuthPresFlag,
bfdSessAuthenticationType
}
STATUS current
DESCRIPTION
"Collection of objects needed for BFD sessions."
::= { bfdGroups 1 }
bfdSessionPerfGroup OBJECT-GROUP
OBJECTS {
bfdSessPerfPktIn,
bfdSessPerfPktOut,
bfdSessUpTime,
bfdSessPerfLastSessDownTime,
bfdSessPerfLastCommLostDiag,
bfdSessPerfSessUpCount,
bfdSessPerfDiscTime
}
STATUS current
DESCRIPTION
"Collection of objects needed to monitor the
performance of BFD sessions."
::= { bfdGroups 2 }
bfdSessionPerfHCGroup OBJECT-GROUP
OBJECTS {
BFD Working Group Expires January 2005 [Page 20]
Internet Draft BFD-DRAFT-01-MIB July 2004
bfdSessPerfPktInHC,
bfdSessPerfPktOutHC
}
STATUS current
DESCRIPTION
"Collection of objects needed to monitor the
performance of BFD sessions for which the
values of bfdSessPerfPktIn, bfdSessPerfPktOut
wrap around too quickly."
::= { bfdGroups 3 }
bfdNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
bfdSessUp,
bfdSessDown
}
STATUS current
DESCRIPTION
"Set of notifications implemented in this
module."
::= { bfdGroups 4 }
END
6. Security Considerations
There are a number of management objects defined in this MIB
module with a MAX-ACCESS clause of read-write and/or read-create.
Such objects may be considered sensitive or vulnerable in some
network environments. It is thus important to control even GET and/or
NOTIFY access to these objects and possibly to even encrypt the
values of these objects when sending them over the network via SNMP.
Some of the readable objects in this MIB module (i.e., objects
with a MAX-ACCESS other than not-accessible) may be considered
sensitive or vulnerable in some network environments. It is thus
important to control even GET and/or NOTIFY access to these objects
and possibly to even encrypt the values of these objects when sending
them over the network via SNMP.
SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure "for example by using IPSec",
even then, there is no control as to who on the secure network is
allowed to access and GET/SET "read/change/create/delete" the objects
in these MIB modules.
It is RECOMMENDED that implementers consider the security features
as provided by the SNMPv3 framework "see [RFC3410], section 8",
BFD Working Group Expires January 2005 [Page 21]
Internet Draft BFD-DRAFT-01-MIB July 2004
including full support for the SNMPv3 cryptographic mechanisms "for
authentication and privacy".
Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module, is properly configured to give access to
the objects only to those principals "users" that have legitimate
rights to indeed GET or SET "change/create/delete" them.
7. Acknowledgements
We would like to thank David Ward for his comments and suggestions.
8. Reference
8.1 Normative References
[BFD] Katz, D., and Ward, D., "Bidirectional Forwarding
Detection", draft-ietf-bfd-base-02.txt.
[BFD-SHARED] Bidirectional Forwarding Detection over Shared
Interfaces, work in progress.
[BFD-LSP] Aggarwal, R., Kompella, K., T. D. Nadeau, and G. Swallow
BFD For MPLS LSPs, draft-ietf-bfd-mpls-01.txt.
8.2 Informative References
[RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart,
"Introduction and Applicability Statements for
Internet-Standard Management Framework", RFC 3410,
December 2002.
[RFC3413] Levi, D., Meyer, P., Stewart, B.,
"SNMP Applications", RFC 3413, December 2002.
[RFC2434] Narten, T. and H. Alvestrand., "Guidelines for Writing
an IANA Considerations Section in RFCs", BCP 26, RFC
2434, October 1998.
9. Authors' Addresses
Thomas D. Nadeau
Cisco Systems, Inc.
300 Beaver Brook Road
Boxboro, MA 01719
BFD Working Group Expires January 2005 [Page 22]
Internet Draft BFD-DRAFT-01-MIB July 2004
Phone: +1-978-936-1470
Email: tnadeau@cisco.com
Zafar Ali
Cisco Systems Inc.
100 South Main St. #200
Ann Arbor, MI 48104, USA.
Phone: +1-734-276-2459
Email: zali@cisco.com
10. Full Copyright Statement
Copyright (C) The Internet Society (2005). This document is subject
to the rights, licenses and restrictions contained in BCP 78, and
except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
11. IANA Considerations
There is one MIB module contained in this document. The following
"IANA Considerations" subsection requests IANA for a new
assignment under the mib-2 subtree. New assignments can only
be made via a Standards Action as specified in [RFC2434].
11.1. IANA Considerations for BFD-STD-MIB
The IANA is requested to assign { mib-2 XXX } to the
MPLS-L3VPN-STD-MIB module specified in this document.
12. Intellectual Property Statement
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
BFD Working Group Expires January 2005 [Page 23]
Internet Draft BFD-DRAFT-01-MIB July 2004
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at ietf-
ipr@ietf.org.
BFD Working Group Expires January 2005 [Page 24]
| PAFTECH AB 2003-2026 | 2026-04-23 05:47:46 |