One document matched: draft-iab-secmech-02.txt
Differences from draft-iab-secmech-01.txt
Network Working Group Steven M. Bellovin
Internet Draft AT&T Labs Research
Charlie Kaufman
IBM
Jeffrey I. Schiller
MIT
Expiration Date: July 2003 January 2003
Security Mechanisms for the Internet
draft-iab-secmech-02.txt
1. Status of this Memo
This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet- Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
Bellovin, Kaufman, Schiller [Page 1]
Internet Draft draft-iab-secmech-02.txt January 2003
2. Abstract
Security must be built into Internet Protocols for those protocols to
offer their services securely. Many security problems can be traced
to improper implementations. However, even a proper implementation
will have security problems if the fundamental protocol is itself
exploitable. Exactly how security should be implemented in a
protocol will vary, because of the structure of the protocol itself.
However, there are many protocols for which standard Internet
security mechanisms, already developed, may be applicable. The
precise one that is appropriate in any given situation can vary. We
review a number of different choices, explaining the properties of
each.
3. Introduction
Internet Security compromises can be divided into several classes,
ranging from Denial of Service to Host Compromise. Denial of Service
attacks are beyond the scope of this document except to the extent
that they are made more difficult by good security practices. Host
Compromise (most commonly caused by undetected Buffer Overflows)
represent flaws in individual implementations rather than flaws in
protocols. Nevertheless, carefully designed protocols can make such
flaws less likely to occur and harder to exploit.
However there are security compromises that are facilitated by the
very protocols that are in use on the Internet. If a security problem
is inherent in a protocol, no manner of implementation will be able
to prevent the problem.
It is therefore vitally important that protocols developed for the
Internet provide this fundamental security.
Exactly how a protocol should be secured depends on the protocol
itself as well as the security needs of the protocol. However we have
developed a number of standard security mechanisms in the IETF. In
many cases appropriate application of these mechanisms can provide
the necessary security for a protocol.
A number of possible mechanisms can be used to provide security on
the Internet. Which one should be selected depends on many different
factors. We attempt here to provide guidance, spelling out the
factors and the currently-standardized (or about-to-be-standardized)
solutions, as discussed at the IAB Security Architecture Workshop
[RFC2316].
Security, however, is an art, not a science. Attempting to follow a
Bellovin, Kaufman, Schiller [Page 2]
Internet Draft draft-iab-secmech-02.txt January 2003
recipe blindly can lead to disaster. As always, good taste in
protocol design should be exercised.
Finally, security mechanisms are not magic pixie dust that can be
sprinkled over completed protocols. It is rare that security can be
bolted on later. Good designs--that is, secure, clean, and efficient
designs--occur when the security mechanisms are crafted along with
the protocol. No conceivable exercise in cryptography can secure a
protocol with flawed semantic assumptions.
4. Decision Factors
4.1. Threat Model
The most important factor in choosing a security mechanism is the
threat model. That is, who may be expected to attack what resource,
using what sorts of mechanisms? A low-value target, such as a Web
site that offers public information only, may not merit much
protection. Conversely, a resource that if compromised could expose
significant parts of the Internet infrastructure--say, a major
backbone router or high-level Domain Name Server--should be protected
by very strong mechanisms. The value of a target to an attacker
depends on the purpose of the attack. If the purpose is to access
sensitive information, all systems that handle this information or
mediate access to it are valuable. If the purpose is to wreak havoc,
systmes on which large parts of the Internet depend are exceedingly
valuable. Even if only public information is posted on a web site,
changing its contents can cause embarassment to its owner and could
result in substantial damage. It is difficult when designing a
protocol to predict what uses that protocol will someday have.
All Internet connected systems require a minimum amount of
protection. Starting in 2000 and continuing to the present, we have
witnessed the advent of a new type of Internet security attack: an
Internet "worm" program that seeks out and automatically attacks
systems that are vulnerable to compromise via a number of attacks
built into the worm program itself. These worm programs can
compromise literally thousands of systems within a very short period
of time.
As of the writing of this document, all of these worms have taken
advantage of programming errors in the implementation of otherwise
reasonably secure protocols. However, it is not hard to envision an
attack that targets a fundamental security flaw in a widely deployed
protocol. It is therefore imperative that we strive to minimize such
flaws in the protocols we design.
Bellovin, Kaufman, Schiller [Page 3]
Internet Draft draft-iab-secmech-02.txt January 2003
[footnote: The first Internet Worm was the "Morris" worm of 1988.
However it was not followed up with similar programs for over 12
years!]
The value of a target to an attacker may depend on where it is
located. A network monitoring station that is physically on a
backbone cable is a major target, since it could easily be turned
into an eavesdropping station. The same machine, if located on a
stub net and used for word processing, would be of much less use to a
sophisticated attacker, and hence would be at significantly less
risk.
One must also consider what sorts of attacks may be expected. At a
minimum, eavesdropping must be seen as a serious threat; there have
been very many such incidents since at least 1993. Often, active
attacks--that is, attacks that involve insertion or deletion of
packets by the attacker--are a risk as well. It is worth noting that
such attacks can be launched with off-the-shelf tools, and have in
fact been observed "in the wild". Of particular interest is a form of
attack called "session hijacking", where someone on a link between
the two communicating parties wait for authentication to complete and
then impersonate one of the parties and continue the connection with
the other.
One of the most important tools available to us for securing
protocols is cryptography. Cryptography permits us to apply various
kinds of protection to data as it traverses the network, without
having to depend on any particular security properties of the network
itself. This is important because the Internet, by its distributed
management and control, cannot be considered a trustworthy media in
and of itself. Its security derives from the mechanisms that we build
into the protocols themselves, independent of the underlying media or
network operators.
Finally, of course, there is the cost to the defender of using
cryptography. This cost is dropping rapidly; Moore's Law, plus the
easy availability of cryptographic components and toolkits, makes it
relatively easy to use strong protective techniques. Although there
are exceptions--public key operations are still expensive, perhaps
prohibitively so if the cost of each public-key operation is spread
over too few transactions--careful engineering design can generally
let us spread this cost over many transactions.
In general, the default today should be to use the strongest
cryptography available in any protocol. Strong cryptography often
costs no more, and sometimes less, then weaker cryptography. The
actual performance cost of an algorithm is often unrelated to the
security it provides.
Bellovin, Kaufman, Schiller [Page 4]
Internet Draft draft-iab-secmech-02.txt January 2003
4.2. A word about Mandatory Mechanisms
We have evolved in the IETF the notion of "mandatory to implement"
mechanisms. This philosophy evolves from our primary desire to ensure
interoperability between different implementations of a protocol. If
a protocol offers many options for how to perform a particular task,
but fails to provide for at last one that all must implement, it may
be possible that multiple, non-interoperable implementations may
result. This is the consequence of the selection of non-overlapping
mechanisms being deployed in the different implementations.
Although a given protocol may make use of only one or a few security
mechanisms, these mechanisms themselves often can make use of several
cryptographic systems. The various cryptographic systems vary in
strength and performance. However, in many protocols we need to
specify a "mandatory to implement" to ensure that any two
implementations will eventually be able to negotiate a common
cryptographic system between them.
There are some protocols that were originally designed to be run in a
very limited domain. It is often argued that the domain of
implementation for a particular protocol is sufficiently well defined
and secure that the protocol itself need not provide any security
mechanisms.
History has shown this argument to be wrong. Inevitably, successful
protocols - even if developed for limited use - wind up used in a
broader environment, where the initial security assumptions do not
hold.
To solve this problem, the IETF requires that *ALL* protocols provide
appropriate security mechanisms, even when their domain of
application is at first believed to be very limited.
It is important to understand that mandatory mechanisms are mandatory
to *implement*. It is not necessarily mandatory that end-users
actually use these mechanisms. If an end-user knows that they are
deploying a protocol over a "secure" network, then they may choose to
disable security mechanisms that they believe are adding insufficient
value as compared to their performance cost. (We are generally
skeptical of the wisdom of disabling strong security even then, but
that is beyond the scope of this document.)
Insisting that certain mechanisms are mandatory to implement means
that those end-users who need the protocol provided by the security
mechanism have it available when needed.
Bellovin, Kaufman, Schiller [Page 5]
Internet Draft draft-iab-secmech-02.txt January 2003
4.3. Granularity of Protection
Some security mechanisms can protect an entire network. While this
economizes on hardware, it can leave the interior of such networks
open to attacks from the inside. Other mechanisms can provide
protection down to the individual user of a timeshared machine,
though perhaps at risk of user impersonation if the machine has been
compromised.
When assessing the desired granularity of protection, protocol
designers should take into account likely usage patterns,
implementation layers (see below), and deployability. If a protocol
is likely to be used only from within a secure cluster of machines
(say, a Network Operations Center), subnet granularity may be
appropriate. By contrast, a security mechanism peculiar to a single
application is best embedded in that application, rather than inside
TCP; otherwise, deployment will be very difficult.
4.4. Implementation Layer
Security mechanisms can be located at any layer. In general, putting
a mechanism at a lower layer protects a wider variety of higher-layer
protocols, but may not be able to protect them as well. A link-layer
encryptor can protect not just IP, but even ARP packets. However,
its reach is just that one link. Conversely, a signed email message
is protected even if sent through many store-and-forward mail
gateways, can identify the actual sender, and the signature can be
verified long after the message is delivered. However, only that one
type of message is protected. Messages of similar formats, such as
some Netnews postings, are not protected unless the mechanism is
specifically adapted and then implemented in the news-handling
programs.
5. Standard Security Mechanisms
5.1. One-Time Passwords
One-time password schemes, such as that described in [RFC2289], are
very much stronger than conventional passwords. The host need not
store a copy of the user's password, nor is it ever transmitted over
the network. However, there are some risks. Since the transmitted
string is derived from a user-typed password, guessing attacks may
still be feasible. (Indeed, a program to launch just this attack is
readily available.) Furthermore, the user's ability to login
necessarily expires after a predetermined number of uses. While in
Bellovin, Kaufman, Schiller [Page 6]
Internet Draft draft-iab-secmech-02.txt January 2003
many cases this is a feature, an implementation most likely needs to
provide a way to reinitialize the authentication database, without
requiring that the new password be sent in the clear across the
network.
There are commercial hardware authentication tokens. Apart from the
session hijacking issue, support for such tokens (especially
challenge/response tokens, where the server sends a different random
number for each authentication attempt) may require extra protocol
messages.
5.2. HMAC
HMAC [RFC2104] is the preferred shared-secret authentication
technique. If both sides know the same secret key, HMAC can be used
to authenticate any arbitrary message. This includes random
challenges, which means that HMAC can be adapted to prevent replays
of old sessions.
An unfortunate disadvantage of using HMAC for connection
authentication is that the secret must be known in the clear by both
parties, making this undesireable when keys are long-lived.
When suitable, HMAC should be used in preference to older techniques,
notably keyed hash functions. Simple keyed hashes based on MD5
[RFC1321], such as that used in the BGP session security mechanism
[RFC2385], are especially to be avoided in new protocols, given the
hints of weakness in MD5.
HMAC can be implemented using any secure hash function, including MD5
and SHA-1 [RFC3174]. SHA-1 is preferable for new protocols because
it is more frequently used for this purpose and may be more secure.
It is important to understand that an HMAC-based mechanism needs to
be employed on every protocol data unit (aka packet). It is a mistake
to use an HMAC-based system to authenticate the beginning of a TCP
session and then send all remaining data without any protection.
Attack programs exist that permit a TCP session to be stolen. An
attacker merely needs to use such a tool to steal a session after the
HMAC step is performed.
Bellovin, Kaufman, Schiller [Page 7]
Internet Draft draft-iab-secmech-02.txt January 2003
5.3. IPsec
IPsec [RFC2401],[RFC2402],[RFC2406],[RFC2407],[RFC2411] is the
generic IP-layer encryption and authentication protocol. As such, it
protects all upper layers, including both TCP and UDP. Its normal
granularity of protection is host-to-host, host-to-gateway, and
gateway-to-gateway. The specification does permit user-granularity
protection, but this is comparatively rare. As such, IPsec is
currently inappropriate when host-granularity is too coarse.
Because IPsec is installed at the IP layer, it is rather intrusive.
Implementing it generally requires either new hardware or a new
protocol stack. This makes it a poor choice for individual
applications, at least until IPsec is more widely deployed. Most
modern operating systems have IPsec available; most routers do not,
at least for the control path.
The key management for IPsec can use either certificates or shared
secrets. For all the obvious reasons, certificates are preferred;
however, they may present more of a headache for the system manager.
There is strong potential for conflict between IPsec and NAT
[Hain99]. NAT does not easily co-exist with any protocol containing
embedded IP address; with IPsec, every packet, for every protocol,
contains such addresses, if only in the headers. The conflict can
sometimes be avoided by using tunnel mode, but that is not always an
appropriate choice for other reasons.
Most current IPsec usage is for virtual private nets. Assuming that
the other constraints are met, IPsec is the security protocol of
choice for VPN-like situations.
5.4. TLS
TLS [RFC2246] provides an encrypted, authenticated channel that runs
on top of TCP. While TLS was originally designed for use by Web
browsers, it is by no means restricted to such. In general, though,
each application that wishes to use TLS will need to be converted
individually.
Generally, the server side is always authenticated by a certificate.
Clients may possess certificates, too, providing mutual
authentication, though this is rarely deployed. It's an unfortunate
reality that even server side authentication it not as secure in
practice as the cryptography would imply because most implementations
allow users to ignore authentication failures (by clicking OK to a
warning) and most users routinely do so [Bell98]. Designers should
Bellovin, Kaufman, Schiller [Page 8]
Internet Draft draft-iab-secmech-02.txt January 2003
thus be wary of demanding plaintext passwords, even over TLS-
protected connections. (This requirement can be relaxed if it is
likely that implementations will be able to verify the authenticity
and authorization of the server's certificate.)
Although application modification is generally required to make use
of TLS, there exist toolkits, both free and commercial, that provide
implementations. These are designed to be incorporated into the
application's code.
5.5. SASL
SASL [RFC2222] is a framework for negotiating an authentication and
encryption mechanism to be used over a TCP stream. As such, its
security properties are those of the negotiated mechanism.
Specifically, unless the negotiated mechanism authenticates all of
the subsequent messages or underlying protection protocol such as TLS
is used, TCP connections are vulnerable to session stealing.
If you need to use TLS (or IPSec) under SASL, why bother with SASL in
the first place? Why not simply use the authentication facilities of
TLS and be done with it?
The answer here is subtle. TLS makes extensive use of certificates
for authentication. As commonly deployed, only servers have
certificates, whereas clients go unauthenticated (at least by the TLS
processing itself).
SASL permits the use of more traditional client authentication
technologies, such as passwords (one-time or otherwise). A powerful
combination is TLS for underlying protection and authentication of
the server, and a SASL-based system for authenticating clients.
5.6. GSS-API
GSS-API [RFC2744] provides a framework for applications to use when
they require authentication, integrity, and/or confidentiality.
Unlike SASL, GSS-API can be used easily with UDP-based applications.
It provides for the creation of opaque authentication tokens (aka
chunks of memory) which may be embedded in a protocol's data units.
Note that the security of GSS-API-protected protocols depends on the
underlying security mechanism; this must be evaluated independently.
Similar considerations apply to interoperability, of course.
Bellovin, Kaufman, Schiller [Page 9]
Internet Draft draft-iab-secmech-02.txt January 2003
5.7. DNSSEC
DNSSEC [RFC2535] digitally signs DNS records. It is an essential
tool for protecting against DNS cache contamination attacks [Bell95];
these in turn can be used to defeat name-based authentication and to
redirect traffic to or past an attacker. The latter makes DNSSEC an
essential component of some other security mechanisms, notably IPsec.
Although not widely deployed on the Internet at the time of the
writing of this document, it offers the potential to provide a secure
mechanism for mapping domain names to IP protocol addresses. It may
also be used to securely associate other information with a DNS name.
This information may be as simple as a service that is supported on a
given node, or a key to be used with IPsec for negotiating a secure
session. (Note that the concept of storing application keys in the
DNS is still controversial.)
5.8. Security/Multipart
Security/Multiparts [RFC1847] are the preferred mechanism for
protecting email. More precisely, it is the MIME framework within
which encryption and/or digital signatures are embedded. Both S/MIME
and OpenPGP (see below) use Security/Multipart for their encoding.
Conforming mail readers can easily recognize and process the
cryptographic portions of the mail.
Security/Multiparts represents one form of "object security", where
the object of interest to the end user is protected, independent of
transport mechanism, intermediate storage, etc. Currently, there is
no general form of object protection available in the Internet.
5.9. Digital Signatures
One of the strongest forms of challenge/response authentication is
based on digital signatures. Using public key cryptography is
preferable to schemes based on secret key ciphers because no server
needs a copy of the client's secret. Rather, the client has a
private key; servers have the corresponding public key.
Using digital signatures properly is tricky. A client should never
sign the exact challenge sent to it, since there are several subtle
number-theoretic attacks that can be launched in such situations.
The Digital Signature Standard [DSS] and RSA [RSA] are both good
choices; each has its advantages. Signing with DSA requires the use
of good random numbers [RFC1750]. If the enemy can recover the
Bellovin, Kaufman, Schiller [Page 10]
Internet Draft draft-iab-secmech-02.txt January 2003
random number used for any given signature, or if you use the same
random number for two different documents, your private key can be
recovered. DSS has much better performance than RSA for generating
new private keys, and somewhat better performance generating
signatures, while RSA has much better performance for verifying
signatures.
5.10. OpenPGP and S/MIME
Digital signatures can be used to build "object security"
applications which can be used to protect data in store and forward
protocols such as electronic mail.
At this writing, two different secure mail protocols, OpenPGP
[OpenPGP] and S/MIME [S/MIME], have been proposed to replace PEM
[PEM]. It is not clear which, if either, will succeed. While
specified for use with secure mail, both can be adapted to protect
data carried by other protocols. Both use certificates to identify
users; both can provide secrecy and authentication of mail messages;
however, the certificate formats are very different. Historically,
the difference between PGP-based mail and S/MIME-based mail has been
the style of certificate chaining. In S/MIME, users possess X.509
certificates; the certification graph is a tree with a very small
number of roots. By contrast, PGP uses the so-called "web of trust",
where any user can sign anyone else's certificate. This
certification graph is really an arbitrary graph or set of graphs.
With any certificate scheme, trust depends on two primary
characteristics. First, it must start from a known-reliable source-
-either an X.509 root, or someone highly trusted by the verifier,
often him or herself. Second, the chain of signatures must be
reliable. That is, each node in the certification graph is crucial;
if it is dishonest or has been compromised, any certificates it has
vouched for cannot be trusted. All other factors being equal (and
they rarely are), shorter chains are preferable.
Some of the differences reflect a tension between two philosophical
positions represented by these technologies. Others resulted from
having separate design teams.
S/MIME is designed to be "fool proof." That is, very little end-user
configuration is required. Specifically, end-users do not need to be
aware of trust relationships, etc. The idea is that if an S/MIME
client says, "This signature is valid", the user should be able to
"trust" that statement at face value without needing to understand
the underlying implications.
Bellovin, Kaufman, Schiller [Page 11]
Internet Draft draft-iab-secmech-02.txt January 2003
To achieve this, S/MIME is typically based on a limited number of
"root" Certifying Authorities (CAs). The goal is to build a global
trusted certificate infrastructure.
The down side to this approach is that it requires a deployed public
key infrastructure before it will work. Two end-users may not be able
to simply obtain S/MIME-capable software and begin communicating
securely. This is not a limitation of the protocol, but a typical
configuration restriction for commonly available software. One or
both of them may need to obtain a certificate from a mutually trusted
CA; furthermore, that CA must already be trusted by their mail
handling software. This process may involve cost and legal
obligations. This ultimately results in the technology being harder
to deploy, particularly in an environment where end-users do not
necessarily appreciate the value received for the hassle incurred.
The PGP "web of trust" approach has the advantage that two end-users
can just obtain PGP software and immediately begin to communicate
securely. No infrastructure is required and no fees and legal
agreements need to be signed to proceed. As such PGP appeals to
people who need to establish ad-hoc security associations.
The down side to PGP is that it requires end-users to have an
understanding of the underlying security technology in order to make
effective use of it. Specifically it is fairly easy to fool a naive
users to accept a "signed" message that is in fact a forgery.
To date PGP has found great acceptance between security-aware
individuals who have a need for secure e-mail in an environment
devoid of the necessary global infrastructure.
By contrast, S/MIME works well in a corporate setting where a secure
internal CA system can be deployed. It does not require a lot of
end-user security knowledge. S/MIME can be used between institutions
by carefully setting up cross certification, but this is harder to do
than it seems.
As of this writing a global certificate infrastructure continues to
elude us. Questions about a suitable business model, as well as
privacy considerations, may prevent one from ever emerging.
5.11. Firewalls and Topology
Firewalls are a topological defense mechanism. That is, they rely on
a well-defined boundary between the good "inside" and the bad
"outside" of some domain, with the firewall mediating the passage of
information. While firewalls can be very valuable if employed
Bellovin, Kaufman, Schiller [Page 12]
Internet Draft draft-iab-secmech-02.txt January 2003
properly, there are limits to their ability to protect a network.
The first limitation, of course, is that firewalls cannot protect
against inside attacks. While the actual incidence rate of such
attacks is not known (and is probably unknowable), there is no doubt
that it is substantial, and arguably constitutes a majority of
security problems. More generally, given that firewalls require a
well-delimited boundary, to the extent that such a boundary does not
exist, firewalls do not help. Any external connections, whether they
are protocols that are deliberately passed through the firewall,
links that are tunneled through, unprotected wireless LANs, or direct
external connections from nominally-inside hosts, weaken the
protection. Firewalls tend to become less effective over time as
users tunnel protocols through them and may have inadequate security
on the tunnel endpoints. If the tunnels are encrypted, there is no
way for the firewall to censor them. An oft-cited advantage of
firewalls is that they hide the existence of internal hosts from
outside eyes. Given the amount of leakage, however, the likelihood
of successfully hiding machines is rather low.
In a more subtle vein, firewalls hurt the end-to-end model of the
Internet and its protocols. Indeed, not all protocols can be passed
safely or easily through firewalls. Sites that rely on firewalls for
security may find themselves cut off from new and useful aspects of
the Internet.
Firewalls work best when they are used as one element of a total
security structure. For example, a strict firewall may be used to
separate an exposed Web server from a back-end database, with the
only opening the communication channel between the two. Similarly, a
firewall that permitted only encrypted tunnel traffic could be used
to secure a piece of a VPN. On the other hand, in that case the
other end of the VPN would need to be equally secured.
5.12. Kerberos
Kerberos [RFC1510] provides a mechanism for two entities to
authenticate each other and exchange keying material. On the client
side, an application obtains a Kerberos "ticket" and "authenticator."
These items, which should be considered opaque data, are then
communicated from client to server. The server can then verify their
authenticity. Both sides may then ask the Kerberos software to
provide them with a session key which can be used to protect or
encrypt data.
Kerberos may be used by itself in a protocol. However, it is also
available as a mechanism under SASL and GSSAPI.
Bellovin, Kaufman, Schiller [Page 13]
Internet Draft draft-iab-secmech-02.txt January 2003
5.13. SSH
SSH provides a secure connection between client and server. It
operates very much like TLS; however, it is optimized as a protocol
for remote connections on terminal-like devices. One of its more
innovative features is its support for "tunneling" other protocols
over the SSH-protected TCP connection. This feature has permitted
knowledgeable security people to perform such actions as reading and
sending e-mail or news via insecure servers over an insecure network.
It is not a substitute for a true VPN, but it can often be used in
place of one.
6. Insecurity Mechanisms
Some common security mechanisms are part of the problem rather than
part of the solution.
6.1. Plaintext Passwords
Plaintext passwords are the most common security mechanism in use
today. Unfortunately, they are also the weakest. When not protected
by an encryption layer, they are completely unacceptable. Even when
used with encryption, plaintext passwords are quite weak, since they
must be transmitted to the remote system. If that system has been
compromised or if the encryption layer does not include effective
authentication of the server to the client, an enemy can collect the
passwords and possibly use them against other targets.
Another weakness arises because of common implementation techniques.
It is considered good form [MT79] for the host to store a one-way
hash of the users' passwords, rather than their plaintext form.
However, that may preclude migrating to stronger authentication
mechanisms, such as HMAC-based challenge/response.
The strongest attack against passwords, other than eavesdropping, is
password-guessing. With a suitable program and dictionary (and these
are widely available), 20-30% of passwords can be guessed in most
environments [Klein90].
6.2. Address-Based Authentication
Another common security mechanism is address-based authentication.
At best, it can work in highly constrained environments. If your
environment consists of a small number of machines, all tightly
administered, secure systems run by trusted users, and if the network
Bellovin, Kaufman, Schiller [Page 14]
Internet Draft draft-iab-secmech-02.txt January 2003
is guarded by a router that blocks source-routing and prevents
spoofing of your source addresses, and you know there are no wireless
bridges, and if you restrict address-based authentication to machines
on that network, you are probably safe. But these conditions are
rarely met.
Among the threats are ARP-spoofing, abuse of local proxies,
renumbering, routing table corruption or attacks, DHCP, IP address
spoofing (a particular risk for UDP-based protocols), sequence number
guessing, and source-routed packets. All of these can be quite
potent.
6.3. Name-Based Authentication
Name-based authentication has all of the problems of address-based
authentication and adds new ones: attacks on the DNS [Bell95] and
lack of a one to one mapping between addresses and names. At a
minimum, a process that retrieves a host name from the DNS should
retrieve the corresponding address records and cross-check.
Techniques such as DNS cache contamination can often negate such
checks.
DNSSEC provides protection against this sort of attack. However, it
does nothing to enhance the reliability of the underlying address.
Further, the technique generates a lot of false alarms. These lookups
do not provide reliable information to a machine, though they might
be a useful debugging tool for humans and could be useful in logs
when trying to reconstruct how and attack took place.
7. Security Considerations
No security mechanisms are perfect. If nothing else, any network-
based security mechanism can be thwarted by compromise of the
endpoints. That said, each of the mechanisms described here has its
own limitations. Any decision to adopt a given mechanism should
weigh all of the possible failure modes. These in turn should be
weighed against the risks to the endpoint of a security failure.
Bellovin, Kaufman, Schiller [Page 15]
Internet Draft draft-iab-secmech-02.txt January 2003
8. Acknowledgements
Brian Carpenter, Tony Hain, and Marcus Leech made a number of useful
suggestions. Much of the substance comes from the participants in
the IAB Security Architecture Workshop.
9. References
[RFC2316] "Report of the IAB Security Architecture Workshop". S.
Bellovin. April 1998.
[RFC2289] "A One-Time Password System". N. Haller, C. Metz, P.
Nesser, M. Straw. February 1998.
[RFC2104] "HMAC: Keyed-Hashing for Message Authentication". H.
Krawczyk, M. Bellare, R. Canetti. February 1997.
[RFC1321] "The MD5 Message-Digest Algorithm". R. Rivest. April
1992.
[RFC2246] "The TLS Protocol Version 1.0. T. Dierks, C. Allen.
January 1999."
[RFC2385] "Protection of BGP Sessions via the TCP MD5 Signature
Option". A. Hefferman. August 1998.
[RFC2401] "Security Architecture for the Internet Protocol". S.
Kent, R. Atkinson. November 1998.
[RFC2402] "IP Authentication Header. S. Kent, R. Atkinson. November
1998."
[RFC2406] "IP Encapsulating Security Payload (ESP). S. Kent, R.
Atkinson. November 1998."
[RFC2407] "The Internet IP Security Domain of Interpretation for
ISAKMP. D. Piper. November 1998."
[RFC2411] "IP Security Document Roadmap". R. Thayer, N. Doraswamy,
R. Glenn. November 1998.
[RFC2744] "Generic Security Service API Version 2 : C-bindings. J.
Wray. January 2000."
[RFC3174] "US Secure Hash Algorithm 1 (SHA1)". D. Eastlake, 3rd,
and P. Jones. September 2001.
Bellovin, Kaufman, Schiller [Page 16]
Internet Draft draft-iab-secmech-02.txt January 2003
[Hain99] "Architectural Implications of NAT". T. Hain. April
1999. Work in progress.
[Bell95] "Using the Domain Name System for System Break-Ins".
Proc. Fifth Usenix Security Conference, 1995.
[Bell98] "Cryptography and the Internet", S.M. Bellovin, in
Proceedings of CRYPTO '98, August 1998.
[RFC2222] "Simple Authentication and Security Layer (SASL)". J.
Myers. October 1997.
[RFC2535] "Domain Name System Security Extensions". D. Eastlake.
March 1999.
[RFC1847] "Security Multiparts for MIME: Multipart/Signed and
Multipart/Encrypted". J. Galvin, S. Murphy, S. Crocker & N. Freed.
October 1995.
[DSS] "Digital Signature Standard". NIST. May 1994. FIPS
186.
[RSA] "A Method for Obtaining Digital Signatures and
Public-Key Cryptosystems". R. Rivest, A. Shamir, L.M. Adleman,
Communications of the ACM, February 1978.
[RFC1750] "Randomness Recommendations for Security". D. Eastlake,
3rd, S. Crocker & J. Schiller. December 1994.
[MT79] "UNIX Password Security", R.H. Morris and K.
Thompson, Communications of the ACM. November 1979.
[Klein90] "'Foiling the Cracker': A Survey of, and Implications
to, Password Security". D. Klein. Usenix UNIX Security Workshop,
August 1990.
Bellovin, Kaufman, Schiller [Page 17]
Internet Draft draft-iab-secmech-02.txt January 2003
10. Author Information
Steven M. Bellovin
AT&T Labs Research
Shannon Laboratory
180 Park Avenue
Florham Park, NJ 07974
USA
Phone: +1 973-360-8656
email: smb@research.att.com
Charlie Kaufman
IBM - WTF5
4 Technology Park Drive
Westford, MA 01886
USA
Phone: +1 978-399-6383
email: ckaufman@us.ibm.com
Jeffrey I. Schiller
Massachusetts Institute of Technology
Room W92-190
77 Massachusetts Avenue
Cambridge, MA 02139-4307
USA
Phone: +1 617-253-8400
email: jis@mit.edu
Bellovin, Kaufman, Schiller [Page 18]
| PAFTECH AB 2003-2026 | 2026-04-21 12:11:20 |