One document matched: draft-foster-e164-gstn-np-00.txt
Mark Foster
Internet Draft Tom McGarry
Document: <draft-foster-e164-gstn-np-00.txt> James Yu
NeuStar, Inc.
Category: Informational March 2000
Number Portability in the GSTN: An Overview
Status of this Memo
This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026 [RFC].
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts. Internet-Drafts are draft documents valid for a maximum of
six months and may be updated, replaced, or obsoleted by other
documents at any time. It is inappropriate to use Internet- Drafts
as reference material or to cite them other than as "work in
progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
To learn the current status of any Internet-Draft, please check the
"1id-abstracts.txt" listing contained in the Internet-Drafts Shadow
Directories on ftp.is.co.za (Africa), nic.nordu.net (Europe),
munnari.oz.au (Pacific Rim), ds.internic.net (US East Coast), or
ftp.isi.edu (US West Coast).
1. Abstract
This document provides an overview of E.164 telephone number
portability (NP) in the Global Switched Telephone Network (GSTN).
There are three types of number portability: service provider
portability (SPNP), location portability, and service portability.
Service provider portability, the focus of the present draft, is a
regulatory imperative in many countries seeking to liberalize local
telephony service competition, by enabling end-users to retain pre-
existing telephone numbers while changing service providers.
Implementation of NP within national GSTN entails potentially
significant changes to numbering administration, network element
signaling, call routing and processing, billing, service management,
and other functions. NP changes the fundamental nature of a dialed
E.164 number from a hierarchical physical routing address to a
virtual address, thereby requiring the transparent translation of
the later to the former. In addition, there are various regulatory
<Foster,McGarry,Yu> Informational - Expiration in September 2000 [1]
Number Portability in the GSTN: An Overview March 2000
constraints which establish relevant parameters for NP
implementation, most of which are not network technology specific.
Consequently, the implementation of NP behavior consistent with
applicable regulatory constraints, as well as the need for
interoperation with the existing GSTN NP implementations, are
relevant topics for numerous areas of IP telephony work-in-progress
at IETF.
2. Introduction
This document provides an overview of E.164 telephone number
portability in the Global Switched Telephone Network (GSTN). There
are considered to be three types of number portability (NP): service
provider portability (SPNP), location portability (not to be
confused with terminal mobility), and service portability.
Service number provider portability (SPNP), the focus of the present
draft, is a regulatory imperative in many countries seeking to
liberalize telephony service competition, especially local service.
Historically, local telephony service (as compared to long distance
or international) has been regulated as a utility-like form of
service. While a number of countries had begun liberalization (e.g.
privatization, de-regulation, or re-regulation) some years ago, the
advent of NP is relatively recent (since ~1995).
E.164 numbers were intentionally designed as hierarchical routing
addresses which could systematically be digit-analyzed to ascertain
the country, serving network provider, serving end-office switch,
and specific line of the called party. As such, without NP a
subscriber wishing to change service providers would incur a number
change as a consequence of being served off of a different end-
office switch operated by the new service provider. The cost and
convenience impact to the subscriber of changing numbers is seen as
barrier to competition. Hence NP has become associated with GSTN
infrastructure enhancements associated with a competitive
environment driven by regulatory directives.
Forms of SPNP have been deployed or are being deployed widely in the
GSTN in various parts of the world, including the US, Canada,
Western Europe, Australia, and the Pacific Rim (e.g. Hong Kong).
Other regions, such as South America (e.g. Brazil) are actively
considering it.
Implementation of NP within a national telephony infrastructure
entails potentially significant changes to numbering administration,
network element signaling, call routing and processing, billing,
service management, and other functions.
NP changes the fundamental nature of a dialed E.164 number from a
hierarchical physical routing address to a virtual address. NP
implementations attempt to encapsulate the impacts to the GSTN and
make NP transparent to subscribers by incorporating a translation
<Foster,McGarry,Yu> Informational - Expiration in September 2000 2
Number Portability in the GSTN: An Overview March 2000
function to map a dialed, potentially ported E.164 address, into a
network routing address (either a number prefix or another E.164
address) which can be hierarchically routed.
This is roughly analogous to the use of network address translation
on IP addresses to enable IP address portability by containing the
impact of the address change to the edge of the network and retain
the use of CIDR blocks in the core which can be route aggregated by
the network service provider to the rest of the internet.
NP bifurcates the historical role of a subscriberÆs E.164 address
into two or more data elements (a dialed or virtual address, and a
network routing address) that must be made available to network
elements through an NP translations database, carried by forward
call signaling, and recorded on call detail records. Not only is
call processing and routing affected, but so is SS7/C7 messaging. A
number of TCAP-based SS7 messaging sets utilize an E.164 address as
an application-level network element address in the global title
address field (GTA) field of the SCCP message header. Consequently,
SS7/C7 signaling transfer points (STPs) and gateways need to be able
to perform n-digit global title translation (GTT) to translate a
dialed E.164 address into its network address counterpart via the NP
database.
In addition, there are various national regulatory constraints which
establish relevant parameters for NP implementation, most of which
are not network technology specific. Consequently, implementations
of NP behavior in IP telephony consistent with applicable regulatory
constraints, as well as the need for interoperation with the
existing GSTN NP implementations, are relevant topics for numerous
areas of IP telephony work-in-progress at IETF.
This document describes three types of number portability and the
four schemes that have been standardized to support SPNP
specifically. Following that, specific information regarding the
call routing and database query implementations are described for
several regions (North American and Europe) and industries (wireless
vs. wireline). The Number Portability Database (NPDB) interfaces and
the call routing schemes that are used in the North America and
Europe are described to show the variety of standards that may be
implemented worldwide. Number pooling is briefly discussed to show
how NP is being enhanced in the US to conserve North American area
codes. The conclusion briefly touches the potential impacts of NP
on IP & Telecommunications Interoperability. Appendix A provides
some specific technical and regulatory information on NP in North
America. Appendix B describes the number portability administration
process that manages the number portability database in North
America.
3. Abbreviations and Acronyms
ACQ All Call Query
<Foster,McGarry,Yu> Informational - Expiration in September 2000 3
Number Portability in the GSTN: An Overview March 2000
AMPS Advanced Mobile Phone System
ANSI American National Standards Institute
CDMA Code Division Multiple Access
CdPA Called Party Address
CdPN Called Party Number
CH Code Holder
CMIP Common Management Information Protocol
CRTC Canadian Radio and Television Commission
CS1 Capability Set 1
CS2 Capability Set 2
DN Directory Number
ETSI European Technical Standards Institute
FCC Federal Communications Commission
FCI Forward Call Indicator
GAP Generic Address Parameter
GMSC Gateway Mobile Services Switching Center
GSM Global System for Mobile Communications
GSTN Global Switched Telephone Network
GW Gateways
HLR Home Location Register
IAM Initial Address Message
ICC Illinois Commerce Commission
IN Intelligent Network
INAP Intelligent Network Application Part
IP Internet Protocol
IS-41 Interim Standards Number 41
ITN Individual Telephony Number
ITU International Telecommunication Union
ITU-TS ITU-Telecommunication Sector
ISUP ISDN User Part
ISDN Integrated Services Digital Network
LEC Local Exchange Carrier
LLC Limited Liability Corporation
LNP Local Number Portability
LRN Location Routing Number
LSMS Local Service Management System
MAP Mobile Application Part
MNP Mobile Number Portability
MSRN Mobile Station Roaming Number
MTP Message Transfer Part
NANC North American Numbering Council
NANP North American Numbering Plan
NP Number Portability
NPAC Number Portability Administration Center
NPDB Number Portability Database
NPRM Notice of Proposed Rulemaking
NRN Network Routing Number
OR Onward Routing
PCS Personal Communication Services
PUC Public Utility Commission
QoR Query on Release
RBOC Regional Bell Operating Company
RN Routing Number
<Foster,McGarry,Yu> Informational - Expiration in September 2000 4
Number Portability in the GSTN: An Overview March 2000
RTP Return to Pivot
SCCP Signaling Connection Control Part
SMS Service Management System
SOA Service Order Administration
SRF Signaling Relaying Function
SRI Send Routing Information
SS7 Signaling System Number 7
TCAP Transaction Capabilities Application Part
TCNI Translated Called Number Indicator
TDMA Time Division Multiple Access
TN Telephone Number
4. Types of Number Portability
As there are several types of E.164 numbers (telephone numbers, or
just TN) in the GSTN, there are correspondingly several types of
E.164 NP in the GSTN. First there are so-call non-geographic E.164
numbers, commonly used for service specific applications such as
freephone (800 or 0800). Portability of these are call non-
geographic number portability (NGNP). NGNP, for example, was
deployed in the US in 1986-92.
Geographic number portability, which includes traditional fixed or
wireline numbers as well as mobile numbers which are allocated out
of geographic number range prefixes, is called NP or in the US local
number portability (LNP).
Number portability allows the telephony subscribers in the Global
Switched Telephone Network (GSTN) to keep their phone numbers when
they change their service providers or subscribed services, or when
they move to new to a new location.
The ability to change the service provider while keeping the same
phone number is called service provider portability (SPNP) also
known as "operator portability."
The ability to change the subscriberÆs fixed service location while
keeping the same phone number is called location portability.
The ability to change the subscribed services (e.g., from the plain
old telephone service to Integrated Services Digital Network (ISDN)
services) while keeping the same phone number is called service
portability. Another aspect of service portability is to allow the
subscribers to enjoy the subscribed services in the same way when
they roam outside their home networks, also known as single number
services.
In addition, mobile number portability (MNP) refers to specific NP
implementation in mobile networks either as part of a broader NP
implementation in the GSTN or on a stand-alone basis. Where
interoperation of LNP and MNP is supported, service portability
between fixed and mobile service types is possible.
<Foster,McGarry,Yu> Informational - Expiration in September 2000 5
Number Portability in the GSTN: An Overview March 2000
At present, SPNP has been the primary form of NP deployed due to its
relevance in enabling local service competition.
Also in use in the GSTN are the terms interim NP (INP or ILNP) and
true NP. Interim NP usually refers to the use of remote call
forwarding-like measures to forward calls to ported numbers through
the donor network to the new service network. These are considered
interim relative to true NP, which seeks to remove the donor network
or old service provider from the call or signaling path altogether.
Often the distinction between interim and true NP is a national
regulatory matter relative to the technical/operational requirements
imposed on NP in that country.
Implementations of true NP in certain countries (e.g. US, Canada,
Spain, Belgium, Denmark) may pose specific requirements for IP
telephony implementations as a result of regulatory and industry
requirements for providing call routing and signaling independent of
the donor network or last previous serving network.
5. Service Provider Number Portability Schemes
Four schemes can be used to support service provider portability and
are briefly described below. But first, some further terms are
introduced.
The donor network is the network that first assigned a telephone
number (e.g., TN +1 202-533-1234) to a subscriber, out of a number
range administratively (e.g., +1 202-533) assigned to it. The old
serving network (or old SP) is the network that previously served
the ported number before the number ported to another network,
called the new serving network or current service provider (SP).
The new service provider (new SP) or current serving network is the
network that currently serves the ported number.
Since a TN can port a number of times, the old SP is not necessarily
the same as the donor network, except for the first time the TN
ports away, or if the TN ports back into the donor network and away
again. While the new SP and old SP roles are transitory as a TN
ports around, the donor network is always the same for any
particular TN based on the service provider to whom the subtending
number range was administratively assigned. See the discussion
below on number pooling, as this enhancement to NP further
bifurcates the role of donor network into two (the number range or
code holder network, and the block holder network).
To simplify the illustration, all the transit networks are ignored,
the originating or donor network is the one that performs the
database queries or call redirection, and the dialed directory
number (TN) has been ported out of the donor network before.
<Foster,McGarry,Yu> Informational - Expiration in September 2000 6
Number Portability in the GSTN: An Overview March 2000
It is assumed that the old serving network, the new serving network
and the donor network are different networks so as to show which
networks are involved in call handling and routing and database
queries in each of four schemes. Please note that the port of the
number (process of moving it from one network to another) happened
prior to the call setup and is not included in the call steps.
Information carried in the signaling messages to support each of the
four schemes is not discussed to simplify the explanation.
5.1 All Call Query (ACQ)
Figure 1 shows the call steps for the ACQ scheme. Those call steps
are as follows:
(1) The Originating Network receives a call from the caller and
sends a query to a centrally administered Number Portability
Database (NPDB), a copy of which is usually resident on a
network element within its network or through a third party
provider.
(2) The NPDB returns the routing number associated with the dialed
directory number. The routing number is discussed later in
Section 7.
(3) The Originating Network uses the routing number to route the
call to the new serving network.
+-------------+ +-----------+ Number +-----------+
| Centralized | | New Serv. | ported | Old Serv. |
| NPDB | +-------->| Network |<------------| Network |
+-------------+ | +-----------+ +-----------+
^ | |
| | |
1| | 3.|
| | 2. |
| | |
| v |
+----------+ | +----------+ +----------+
| Orig. |------+ | Donor | | Internal |
| Network | | Network | | NPDB |
+----------+ +----------+ +----------+
Figure 1 - All Call Query (ACQ) Scheme.
5.2 Query on Release (QoR)
Figure 2 shows the call steps for the QoR scheme. Those call steps
are as follows:
<Foster,McGarry,Yu> Informational - Expiration in September 2000 7
Number Portability in the GSTN: An Overview March 2000
(1) The Originating Network receives a call from the caller and
routes the call to the donor network.
(2) The donor network releases the call and indicates that the
dialed directory number has been ported out of that switch.
(3) The Originating Network sends a query to its copy of the
centrally administered NPDB.
(4) The NPDB returns the routing number associated with the dialed
directory number.
(5) The Originating Network uses the routing number to route the
call to new serving network.
+-------------+ +-----------+ Number +-----------+
| Centralized | | New Serv. | ported | Old Serv. |
| NPDB | | Network |<------------| Network |
+-------------+ +-----------+ +-----------+
^ | ^
| | 4. |
3.| | 5. |
| | +----------------------+
| | |
| v |
+----------+ 2. +----------+ +----------+
| Orig. |<---------------| Donor | | Internal |
| Network |--------------->| Network | | NPDB |
+----------+ 1. +----------+ +----------+
Figure 2 - Query on Release (QoS) Scheme.
5.3 Call Dropback
Figure 3 shows the call steps for the Dropback scheme. This scheme
is also known as "Return to Pivot (RTP)." Those call steps are as
follows:
(1) The Originating Network receives a call from the caller and
routes the call to the donor network.
(2) The donor network detects that the dialed directory number has
been ported out of the donor switch and checks with an internal
network-specific NPDB.
(3) The internal NPDB returns the routing number associated with the
dialed directory number.
(4) The donor network releases the call by providing the routing
number.
(5) The Originating Network uses the routing number to route the
call to the new serving network.
+-------------+ +-----------+ Number +-----------+
| Centralized | | New Serv. | porting | Old Serv. |
| NPDB | | Network |<------------| Network |
<Foster,McGarry,Yu> Informational - Expiration in September 2000 8
Number Portability in the GSTN: An Overview March 2000
+-------------+ +-----------+ +-----------+
/\
|
5. |
+------------------------+
|
|
+----------+ 4. +----------+ 3. +----------+
| Orig. |<---------------| Donor |<----------| Internal |
| Network |--------------->| Network |---------->| NPDB |
+----------+ 1. +----------+ 2. +----------+
Figure 3 - Dropback Scheme.
5.4 Onward Routing (OR)
Figure 4 shows the call steps for the Dropback scheme. This scheme
is also called Remote Call Forwarding. Those call steps are as
follows:
(1) The Originating Network receives a call from the caller and
routes the call to the donor network.
(2) The donor network detects that the dialed directory number has
been ported out of the donor switch and checks with an internal
network-specific NPDB.
(3) The internal NPDB returns the routing number associated with the
dialed directory number.
(4) The donor network uses the routing number to route the call to
the new serving network.
+-------------+ +-----------+ Number +-----------+
| Centralized | | New Serv. | porting | Old Serv. |
| NPDB | | Network |<------------| Network |
+-------------+ +-----------+ +-----------+
/\
|
4.|
|
|
|
+----------+ +----------+ 3. +----------+
| Orig. | | Donor |<----------| Internal |
| Network |--------------->| Network |---------->| NPDB |
+----------+ 1. +----------+ 2. +----------+
Figure 4 - Onward Routing (OR) Scheme.
5.5 Comparisons of the Four Schemes
<Foster,McGarry,Yu> Informational - Expiration in September 2000 9
Number Portability in the GSTN: An Overview March 2000
Only the ACQ scheme does not involve the donor network when routing
the call to the new serving network of the dialed ported number.
The other three schemes involve call setup or signaling with the
donor network.
Only the OR scheme requires the setup of two physical call segments,
one from the Originating Network to the donor network and the other
from the donor network to the new serving network. The OR scheme is
the least efficient in terms of using the network resources. The
QoR and Dropback schemes set up calls to the donor network first but
release the call back to the Originating Network that then initiates
a new call to the Current Serving Network. For the QoR and Dropback
schemes, circuits are still reserved one by one between the
Originating Network and the donor network when the Originating
Network sets up the call towards the donor network. Those circuits
are released one by one when the call is released from the donor
network back to the Originating Network. The ACQ scheme is the most
efficient in terms of using the switching and transmission
facilities for the call.
Both the ACQ and QoR schemes involve Centralized NPDBs for the
Originating Network to retrieve the routing information.
Centralized NPDB means that the NPDB contains ported number
information from multiple networks. This is in contrast to the
internal network-specific NPDB that is used for the Dropback and OR
schemes. The internal NPDB only contains information about the
numbers that were ported out of the donor network. The internal
NPDB can be a stand-alone database that contains information about
all or some ported-out numbers from the donor network. It can also
reside on the donor switch and only contains information about those
numbers ported out of the donor switch. In that case, no query to a
stand-alone internal NPDB is required. The donor switch for a
particular phone number is the switch to which the number range is
assigned from which that phone number was originally assigned.
For example, number ranges in the North American Numbering Plan
(NANP) are usually assigned in the form of central office codes (CO
codes) comprising a six-digit prefix formatted as a NPA+NXX. Thus a
switch serving +1 202-533 would typically serve +1 202-533-2000 thru
+1 202-533-9999. In major cities, switches usually host several CO
codes. NPA stands for Numbering Plan Area that is also known as the
area code. It is three-digit long and has the format of NXX where N
is any digit from 2 to 9 and X is any digit from 0 to 9. NXX in the
NPA+NXX format is known as the office code that has the same format
as the NPA. When the first number out of an NPA+NXX code is ported
out to another switch, that NPA+NXX is called portable NPA+NXX.
Similarly, in other national E.164 plans, number ranges cover a
contiguous range of numbers within that range. Once a number within
that range has ported away from the donor network, all numbers in
that range are considered potentially ported and should be queried
in the NPDB.
<Foster,McGarry,Yu> Informational - Expiration in September 2000 10
Number Portability in the GSTN: An Overview March 2000
The ACQ scheme has two versions. One version is for the Originating
Network to always query the NPDB when a call is received from the
caller regardless whether the dialed directory number is ported or
not. The other version is to check whether the dialed directory
number belongs to any portable number range. If yes, an NPDB query
is sent. If not, no NPDB query is sent. The former performs better
when there are many portable number ranges. The latter performs
better when there are not too many portable number ranges at the
expense of checking every call to see whether NPDB query is needed.
The latter ACQ scheme is similar to the QoR scheme except that the
QoR scheme uses call setup and relies on the donor network to
indicate "number ported out" before launching the NPDB query.
6. Database Queries in the NP Environment
As indicated earlier, the ACQ and QoR schemes require that a switch
query the NPDB for routing information. Various standards have been
defined for the switch-to-NPDB interface. Those interfaces with
their protocol stacks are described below. The term "NPDB" is used
for a stand-alone database that may support just one or some or all
of the interfaces mentioned below. The NPDB query contains the
dialed directory number and the NPDB response contains the routing
number. There are certainly other information that is sent in the
query and response. The primary concern is to get the routing
number from the NPDB to the switch for call routing.
6.1 U.S. and Canada
One of the following five NPDB interfaces can be used to query an
NPDB:
(a) Advanced Intelligent Network (AIN) using the ANSI version of the
Intelligent Network Application Part (INAP) [ANSI SS] [ANSI DB].
The INAP is carried on top of the protocol stack that includes
the American National Standards Institute (ANSI) Message
Transfer Part (MTP) Levels 1 through 3, ANSI Signaling
Connection Control Part (SCCP), and ANSI Transaction
Capabilities Application Part (TCAP). This interface can be
used by the wireline or wireless switches, is specific to the
LRN implementation of LNP in North America, and is modeled on
the PODP trigger defined in the AIN 0.1 call model.
(b) Intelligent Network (IN), which is similar to the one used for
querying the 800 databases. The IN protocol is carried on top
of the protocol stack that includes the ANSI MTP Levels 1
through 3, ANSI SCCP, and ANSI TCAP. This interface can be used
by the wireline or wireless switches.
(c) ANSI IS-41 [IS41] [ISNP], which is carried on top of the
protocol stack that includes the ANSI MTP Levels 1 through 3,
<Foster,McGarry,Yu> Informational - Expiration in September 2000 11
Number Portability in the GSTN: An Overview March 2000
ANSI SCCP, and ANSI TCAP. This interface can be used by the IS-
41 based cellular/Personal Communication Services (PCS) wireless
switches (e.g., AMPS, TDMA and CDMA). Cellular systems use
spectrum at 800 MHz range and PCS systems use spectrum at 1900
MHz range.
(d) Global System for Mobile Communication Mobile Application Part
(GSM MAP) [GSM], which is carried on top of the protocol stack
that includes the ANSI MTP Levels 1 through 3, ANSI SCCP, and
International Telecommunication Union - Telecommunication Sector
(ITU-TS) TCAP. It can be used by the PCS1900 wireless switches
that are based on the GSM technologies. GSM is a series of
wireless standards defined by the European Telecommunications
Standards Institute (ETSI).
(e) ISUP triggerless translation. NP translations are performed
transparently to the switch network by the signaling network
(e.g. STPs or signaling gateways). ISUP IAM messages are
examined to determine if the CdPN field has already been
translated, and if not, an NPDB query is performed, and the
appropriate parameters in the IAM message modified to reflect
the results of the translation. The modified IAM message is
forwarded by the signaling node on to the designated DPC in a
transparent manner to continue call setup.
Wireline switches have the choice of using either (a), (b), or (e).
IS-41 based wireless switches have the choice of using (a), (b),
(c), or (e). PCS1900 wireless switches have the choice of using
(a), (b), (d), or (e). In the North America, service provider
portability will be supported by both the wireline and wireless
systems, not only within the wireline or wireless domain but also
across the wireline/wireless boundary. However, this is not true in
Europe where service provider portability is usually supported only
within the wireline or wireless domain, not across the
wireline/wireless boundary due to explicit use of service-specific
number range prefixes. The reason is to avoid caller confusion
about the call charge. GSM systems in Europe are assigned
distinctive destination network codes, and the caller pays a higher
charge when calling a GSM directory number.
6.2 Europe
One of the following three interfaces can be used to query an NPDB:
(a) Capability Set 1 (CS1) of the ITU-TS INAP [CS1], which is
carried on top of the protocol stack that includes the ITU-TS
MTP Levels 1 through 3, ITU-TS SCCP, and ITU-TS TCAP.
(b) Capability Set 2 (CS2) of the ITU-TS INAP [CS2], which is
carried on top of the protocol stack that includes the ITU-TS
<Foster,McGarry,Yu> Informational - Expiration in September 2000 12
Number Portability in the GSTN: An Overview March 2000
MTP Levels 1 through ITU-TS MTP Levels 1 through 3, ITU-TS SCCP,
and ITU-TS TCAP.
(c) ISUP triggerless translation. NP translations are performed
transparently to the switch network by the signaling network
(e.g. STPs or signaling gateways). ISUP IAM messages are
examined to determine if the CdPN field has already been
translated, and if not, an NPDB query is performed, and the
appropriate parameters in the IAM message modified to reflect
the results of the translation. The modified IAM message is
forwarded by the signaling node on to the designated DPC in a
transparent manner to continue call setup.
Wireline switches have the choice of using either (a), (b), or (c);
however, all the implementations in Europe so far are based on CS1.
As indicated earlier that number portability in Europe does not go
across the wireline/wireless boundary. The wireless switches can
also use (a) or (b) to query the NPDBs if those NPDBs contains
ported wireless directory numbers. The term "Mobile Number
Portability (MNP)" is used for the support of service provider
portability by the GSM networks in Europe.
In most, if not all, cases in Europe, the calls to the wireless
directory numbers are routed to the wireless donor network first.
Over there, an internal NPDB is queried to determine whether the
dialed wireless directory number has been ported out or not. In
this case, the interface to the internal NPDB is not subject to
standardization.
MNP in Europe can also be supported via MNP Signaling Relay Function
(MNF-SRF). Again, an internal NPDB or a database integrated at the
MNP-SRF is used to modify the SCCP Called Party Address parameter in
the GSM MAP messages so that they can be re-directed to the wireless
donor network. Call routing involving MNP will be explained in
Section 7.2.
7. Call Routing in the NP Environment
This section discusses the call routing after the routing
information has been retrieved either through an NPDB query or an
internal database lookup at the donor switch, or from the Integrated
Services Digital Network User Part (ISUP) signaling message (e.g.,
for the Dropback scheme). For the ACQ, QoR and Dropback schemes, it
is the Originating Network that has the routing information and is
ready to route the call. For the OR scheme, it is the donor network
that has the routing information and is ready to route the call.
A number of triggering schemes may be employed that determine where
in the call path the NPDP query is performed. In the US an ôN-1ö
policy is used, which essentially says that for local calls, the
orinigating local carriers performs the query, otherwise, the long
<Foster,McGarry,Yu> Informational - Expiration in September 2000 13
Number Portability in the GSTN: An Overview March 2000
distance carrier is expected to. To ensure independence of the
actual trigger poligy employed in any one carrier, forward call
signaling is used to flag that an NPDB query has already been
performed and to therefore suppress any subsequent NP triggers that
may be encountered in downstream switches, in downstream networks.
This allows the earliest able network in the call path to perform
the query without introducing additional costs and call setup delays
were redundant queries performed downstream.
7.1 U.S. and Canada
In the U.S. and Canada, a ten-digit North American Numbering Plan
(NANP) number called Location Routing Number (LRN) is assigned by to
every switch involved in NP. In the NANP, a switch is not reachable
unless it has a unique number range (CO code) assigned to it.
Consequently, the LRN for a switch is always assigned out of a CO
code that is assigned to that switch.
The LRN assigned to a switch currently serving a particular ported
telephone number is returned as the network routing address in the
NPDB response. The service portability scheme that was adopted in
the North America is very often referred to as the LRN scheme or
method.
LRN serves as a network address for terminating calls served off
that switch using ported numbers. The LRN is assigned by the switch
operator using any of the unique CO codes (NPA+NXX) assigned to that
switch. The LRN is consider a non-dialable address, as the same 10-
digit number value may be assigned to a line on that switch. A
switch may have more than one LRN.
During call routing/processing, a switch performs an NPDB query to
obtain the LRN associated with the dial directory number. When
formulating the ISUP Initial Address Message (IAM) to be sent to the
next switch, the switch puts the ten-digit LRN in the ISUP Called
Party Number (CdPN) parameter and the originally dialed directory in
the ISUP Generic Address parameter (GAP). A new code in the GAP was
defined to indicate that the address information in the GAP is the
dialed directory number. NPDB queries are performed for all the
dialed directory numbers whose NPA+NXX codes are marked as portable
NPA+NXX at that switch. A new bit in the ISUP Forward Call
Indicator (FCI) parameter, the Translated Called Number Indicator
(TCNI) bit, is set to imply that NPDB query has already been
performed. All the switches in the downstream will not perform the
NPDB query if the TCNI bit is set.
When the terminating switch receives the IAM and sees the TCNI bit
in the FCI parameter set and its own LRN in the CdPN parameter, it
retrieves the originally dialed directory number from the GAP and
uses the dialed directory number to terminate the call.
A dialed directory with a portable NPA+NXX does not imply that
directory number has been ported. The NPDBs currently do not store
<Foster,McGarry,Yu> Informational - Expiration in September 2000 14
Number Portability in the GSTN: An Overview March 2000
records for non-ported directory numbers. In that case, the NPDB
will return the same dialed directory number instead of the LRN.
The switch will then set the TCNI bit but keep the dialed directory
number in the CdPN parameter.
In the real world environment, the Originating Network is not always
the one that performs the NPDB query. For example, it is usually
the long distance carriers that query the NPDBs for long distance
calls. In that case, the Originating Network operated by the local
exchange carrier (LEC) simply routes the call to the long distance
carrier that is to handle that call. A wireless network acting as
the Originating Network can also route the call to the
interconnected local exchange carrier network if it does not want to
support the NPDB interface at its mobile switches.
7.2 Europe
In Europe, a routing number is prefixed to the dialed directory
number. The ISUP CdPN parameter in the IAM will contain the routing
prefix and the dialed directory number. For example, United Kingdom
uses routing prefixes with the format of 5XXXXX and Italy uses
CXXXXXXXX as the routing prefix. The networks use the information
in the ISUP CdPN parameter to route the call to the New/Current
Serving Network.
The routing prefix can identify the Current Serving Network or the
Current Serving Switch of a ported number. For the former case,
another query to the "internal" NPDB at the Current Serving Network
is required to identify the Current Serving Switch before routing
the call to that switch. This shields the Current Serving Switch
information for a ported number from the other networks at the
expense of an additional NPDB query. Another routing number, may be
meaningful within the Current Serving Network, will replace the
previously prefixed routing number in the ISUP CdPN parameter. For
the latter case, the call is routed to the Current Serving Switch
without an additional NPDB query.
When the terminating switch receives the IAM and sees its own
routing prefix in the CdPN parameter, it retrieves the originally
dialed directory number after the routing prefix, and uses the
dialed directory number to terminate the call.
In addition to the addition of the routing prefix to the CdPN
parameter, some other information may be added/modified as is listed
in the draft ITU-T Recommendation Q.769.1 [ISUP]. Those
enhancements in the ISUP to support number portability are briefly
described below.
Three methods can be used to transport the Directory Number (DN) and
the Routing Number (RN):
<Foster,McGarry,Yu> Informational - Expiration in September 2000 15
Number Portability in the GSTN: An Overview March 2000
(a) Two separate parameters with the CdPN parameter containing the
RN and a new Called Directory Number (CdDN) parameter containing
the DN. A new Nature of Address (NOA) indicator in the CdPN
parameter is defined to indicate that the RN is in the CdPN
parameter. The switches use the CdPN parameter to route the call
as is done today.
(b) Two separate parameters with the CdPN parameter containing the
DN and a new Network Routing Number (NRN) parameter containing
the RN. This method requires that the switches use the NRN
parameter to route the call.
(c) Concatenated parameter with the CdPN parameter containing the RN
plus the DN. A new Nature of Address (NOA) indicator in the CdPN
parameter is defined to indicate that the RN is concatenated with
the DN in the CdPN parameter.
There is also a network option to add a new ISUP parameter called
Number Portability Forwarding Information parameter. This parameter
has a four-bit Number Portability Status Indicator field that can
provide an indication whether number portability query is done for
the called directory number and whether the called directory number
is ported or not if the number portability query is done.
Please note that all those enhancements are for national use. This
is because number portability is supported within a nation. Within
each nation, the telecommunications industry or the regulatory
bodies can decide which method or methods to use. Number
portability related parameters and coding are never passed across
the national boundaries.
As indicated earlier, an originating wireless network can query the
NPDB and concatenate the RN with DN in the CdPN parameter and route
the call directly to the Current Serving Network.
If NPDBs do not contain information about the wireless directory
numbers, the call, originated from either a wireline or a wireless
network, will be routed to the Wireless donor network. Over there,
an internal NPDB is queried to retrieve the RN that then is
concatenated with the DN in the CdPN parameter.
If MNP-SRF is supported, the Gateway Mobile Services Switching
Center (GMSC) at the wireless donor network, when receiving a call
from the wireline network or originated from within its network, can
send the GSM MAP Send Routing Information (SRI) message to the MNP-
SRF. The MNP-SRF interrogates an internal or integrated NPDB for
the RN of the MNP-SRF of the wireless Current Serving Network and
prefixes the RN to the dialed wireless directory number in the
global title address information in the SCCP Called Party Address
(CdPA) parameter. This SRI message will be routed to the MNP-SRF of
the wireless Current Serving Network, which then responds with an
acknowledgement by providing the RN plus the dialed wireless
directory number as the Mobile Station Roaming Number (MSRN). The
<Foster,McGarry,Yu> Informational - Expiration in September 2000 16
Number Portability in the GSTN: An Overview March 2000
GMSC of the Wireless donor network formulates the ISUP IAM with the
RN plus the dialed wireless directory number in the CdPN parameter
and routes the call to the Wireless Current Serving Network. A GMSC
of the Wireless Current Serving Network receives the call and sends
an SRI message to the associated MNP-SRF where the global title
address information of the SCCP CdPA parameter contains only the
dialed wireless directory number. The MNP-SRF then replaces the
global title address information in the SCCP CdPA parameter with the
address information associated with a Home Location Register (HLR)
that host the dialed wireless directory number and forwards the
message to that HLR after verifying that the dialed wireless
directory number is a ported-in number. The HLR then returns an
acknowledgement by providing an MSRN for the GMSC to route the call
to the MSC that currently serves the mobile station that is
associated with the dialed wireless directory number. Please see
[MNP] for details and additional scenarios.
8. Number Conservation Methods Enabled by NP
In addition to porting numbers NP provides the ability for number
administrators to assign numbering resources to operators in smaller
increments. Today it is common for numbering resources to be
assigned to telephone operators in a large block of consecutive
telephone numbers (TN). For example, in North America these blocks
contain 10,000 TNs and are of the format NXX+0000 to NXX+9999.
Operators are assigned a specific NXX, or block. That operator is
referred to as the block holder. In that block there are 10,000 TNs
with line numbers ranging from 0000 to 9999.
Instead of assigning an entire block to the operator NP allows the
administrator to assign a sub-block or even an individual telephone
number. This is referred to as block pooling and individual
telephone number (ITN) pooling, respectively.
8.1 Block Pooling
Block Pooling refers to the process whereby the number administrator
assigns a range of numbers defined by a logical sub-block of the
existing block. Using North America as an example, block pooling
would allow the administrator to assign sub-blocks of 1,000 TNs to
multiple operators. That is, NXX+0000 to NXX+0999 can be assigned
to operator A, NXX+1000 to NXX+1999 can be assigned to operator B,
NXX-2000 to 2999 can be assigned to operator C, etc. In this
example block pooling divides one block of 10,000 TNs into ten
blocks of 1,000 TNs.
Porting the sub-blocks from the block holder enables block pooling.
Using the example above operator A is the block holder, as well as,
the holder of the first sub-block, NXX+0000 to NXX+0999. The second
sub-block, NXX+1000 to NXX+1999, is ported from operator A to
operator B. The second sub-block, NXX+2000 to NXX+2999, is ported
from operator A to operator C, and so on. NP administrative
<Foster,McGarry,Yu> Informational - Expiration in September 2000 17
Number Portability in the GSTN: An Overview March 2000
processes and call processing will enable proper and efficient
routing.
From a number administration and NP administration perspective block
pooling introduces a new concept, that of the sub-block holder.
Block pooling requires coordination between the number
administrator, the NP administrator, the block holder, and the sub-
block holder. Block pooling must be implemented in a manner that
allows for NP within the sub-blocks. Each TN can have a different
serving operator, sub-block holder, and block holder.
8.2 ITN Pooling
ITN pooling refers to the process whereby the number administrator
assigns individual telephone numbers to operators. Using the North
American example, one block of 10,000 TNs can be divided into 10,000
ITNs. ITN is more commonly deployed in freephone services.
In ITN the block is not assigned to an operator but to a central
administrator. The administrator then assigns ITNs to operators. NP
administrative processes and call processing will enable proper and
efficient routing.
10. Conclusion
There are three general areas of impact to IP telephony work-in-
progress at IETF:
1. NP implementation or emulation in IP telephony
2. Interoperation between NP in GSTN and IP telephony
3. Interconnection to NP administrative environment
A good understanding of how number portability is supported in the
GSTN is important when addressing the interworking issues between IP
based networks and the GSTN. This is especially important when the
IP based network needs to route the calls to the GSTN. As shown in
Section 6, there are a variety of standards with various protocol
stacks for the switch-to-NPDB interface. If an entity in the
Internet needs to query those existing NPDBs for routing number
information to terminate the calls to the destination GSTN, it would
be impractical, if not an impossible, job for that entity to support
all those interface standards.
If not all of the IP telephony gateways (GWs) can reach the Current
Serving Switch of a ported number, then the IP based network may
need to obtain the RN of the Current Serving Network or Switch
before selecting the terminating GW to terminate a call to the GSTN.
The RN should be passed to the terminating GW so that another NPDB
query at the terminating GW or the terminating GSTN is avoided. As
indicated earlier, the ISUP support of the number portability is
confined within the national boundary (e.g., the RN contains a
national number instead of an international number). When routing a
call to the terminating GSTN from the IP based network, the
<Foster,McGarry,Yu> Informational - Expiration in September 2000 18
Number Portability in the GSTN: An Overview March 2000
signaling messages, be it ISUP, Session Initiation Protocol (SIP),
or others, will need to be enhanced to carry the number portability
related information so that the terminating GW or GSTN can make use
of the information without an additional NPDB lookup.
Overlap signaling exists in the GSTN. For a call routing from the
originating GSTN to the terminating GSTN via the IP based network
that involves overlap signaling, NP will impact the call processing
within the IP based network if they must deal with the overlap
signaling. The entities in the IP based networks that are to
retrieve the NP information (e.g., the routing number) must collect
a complete called party number information before retrieving the NP
information for a ported number. Otherwise, the information
retrieval won't be successful.
The IP based networks also may need to support some forms of number
portability in the future if E.164 numbers [E164] are assigned to
the IP based end users. Many different types of networks use E.164
numbers to identify the end users or terminals in those networks.
Number portability among those various types of networks may also
need to be supported in the future.
11. References
[ANSI OSS] ANSI Technical Requirements No. 1, "Number Portability -
Operator Services Switching Systems," April 1999.
[ANSI SS] ANSI Technical Requirements No. 2, "Number Portability -
Switching Systems," April 1999.
[ANSI DB] ANSI Technical Requirements No. 3, "Number Portability
Database and Global Title Translation," April 1999.
[CS1] ITU-T Q-series Recommendations - Supplement 4, "Number
portability Capability set 1 requirements for service provider
portability (All call query and onward routing)," May 1998.
[CS2] ITU-T Q-series Recommendations - Supplement 5, "Number
portability -Capability set 2 requirements for service provider
portability (Query on release and Dropback)," March 1999.
[E164] ITU-T Recommendation E.164, "The International Public
Telecommunications Numbering Plan," 1997.
[FRS] NANC, "Functional Requirements Specification - NPAC SMS,
Version 2.0.2," September 1, 1999.
[GSM] GSM 09.02: "Digital cellular telecommunications system (Phase
2+); Mobile Application Part (MAP) specification".
<Foster,McGarry,Yu> Informational - Expiration in September 2000 19
Number Portability in the GSTN: An Overview March 2000
[ICC] ICC, "Generic Switching & Signaling Requirements for Number
Portability, Issue 1.05," August 1, 1997.
[IIS] NeuStar (formerly Lockheed Martin IMS Corporation), prepared
for the North American Numbering Council (NANC),"NPAC SMS
interoperable Interface Specification, Version 2.0.2,"
September 1, 1999.
[IS41] TIA/EIA IS-756 Rev. A, "TIA/EIA-41-D Enhancements for
Wireless Number Portability Phase II (December 1998)"Number
Portability Network Support," April 1998.
[ISUP] ITU-T COM 11-R 162-E, Draft Recommendation Q.769.1,
"Signaling System No. 7 - ISDN User Part Enhancements for the
Support of Number Portability," May 1999.
[MNP] Draft GSM 03.66 V7.2.0 (1999-11) European Standard
(Telecommunications series) Digital cellular telecommunications
system (Phase 2+); Support of Mobile Number Portability (MNP);
Technical Realisation; Stage 2; (GSM 03.66 Version 7.2.0
Release 1998).
[RFC] Scott Bradner, RFC2026, "The Internet Standards Process --
Revision 3," October 1996.
12. Acknowledgments
The authors would like to thank Monika Muench for providing
reference information on ISUP and MNP.
13. Author's Addresses
Mark D. Foster
NeuStar, Inc.
1120 Vermont Avenue, NW,
Suite 550
Washington, D.C. 20005
United States
Phone: +1-202-533-2800
Fax: +1-202-533-2975
Email: mark.foster@neustar.com
Tom McGarry
NeuStar, Inc.
1120 Vermont Avenue, NW,
Suite 550
Washington, D.C. 20005
United States
<Foster,McGarry,Yu> Informational - Expiration in September 2000 20
Number Portability in the GSTN: An Overview March 2000
Phone: +1-202-533-2810
Fax: +1-202-533-2975
James Yu
NeuStar, Inc.
1120 Vermont Avenue, NW,
Suite 550
Washington, D.C. 20005
United States
Phone: +1-202-533-2814
Fax: +1-202-533-2975
Email: james.yu@neustar.com
<Foster,McGarry,Yu> Informational - Expiration in September 2000 21
Number Portability in the GSTN: An Overview March 2000
APPENDICES
APPENDIX A. NP Requirements in the North America
A.1 Background
The North American telecommunications industry began to seriously
investigate methods of providing local number portability (LNP) in
late 1994. On July 13, 1995, the Federal Communications Commission
(FCC) in the U.S. issued a Notice of Proposed Rulemaking (NPRM) FCC
Docket Number 95-116 that opened discussion on NP and sought
comments on a wide variety of policy and technical issues related to
NP.
In 1995 and 1996 several state regulatory bodies, notably the
Illinois Commerce Commission (ICC), began the process of officially
selecting the architecture to be used for NP in their respective
states. After considerable discussion and deliberation, the
"Location Routing Number (LRN)" scheme was selected by Illinois, and
other states. The switching and signaling requirements for number
portability developed in the Illinois LNP workshop under the
auspices of the ICC became the basis of the de facto North American
industry standards [ICC]. The activities on number portability in
the North America also interacted with activities in many other
parts of world.
A.2 Performance/Legal/Regulatory Requirements
After substantial industry discussion and debate, and extensive
comments filed with the FCC, the FCC and the US telecommunications
industry set the following minimum performance criteria for LNP:
1. Support existing network services, features and capabilities.
2. Efficiently use numbering resources.
3. Not require end users to change their telecommunication numbers.
4. Not require telecommunications carrier to rely on databases,
other network facilities, or services provided by other
telecommunications carriers in order to route calls to proper
termination point.
5. Not result in unreasonable degradation in service quality or
network reliability when implemented.
6. Not result in unreasonable degradation of service quality or
network reliability when customers switch carriers.
7. Not result in a carrier having a proprietary interest.
8. Be able to accommodate location and service portability in the
future.
9. Have no significant adverse impact outside areas where number
portability is deployed.
In July 1996, the FCC issued the First Report and Order on LNP under
95-116, calling for the deployment of LNP across the US starting in
1997. The FCC did not mandate any specific implementation of LNP in
the US, but it did call upon the industry to develop and endorse a
<Foster,McGarry,Yu> Informational - Expiration in September 2000 22
Number Portability in the GSTN: An Overview March 2000
national standard that would ensure interoperability with all
industry segments, including wireless. While providing overall
guidelines and requirements for LNP, it did explicitly state that
the LRN method met these requirements, whereas alternate proposals
(such as QoR) did not.
A core requirement was that a carrier who is serving ported numbers
need not be reliant on any other carrier (especially the donor
network) for completing calls, whether for call transport/routing or
for signaling. That's not to say that a carrier couldn't
voluntarily opt to use another carrier or the donor network for
queries or call routing. But the key is voluntarily. This
requirement was imposed on all NP implementations in the U.S. for
common carrier telephony services regardless of the network
technology employed.
Similar requirements were adopted by the Canadian Radio and
Television Commission (CRTC), the equivalent of the FCC in Canada,
and in a number of regulatory and industry bodies in other countries
(e.g., Belgium, Denmark, Spain, Switzerland) which resulted in the
use of centralized NPDBs to support number portability.
In the U.S. and Canada, the ACQ scheme was adopted because it does
not rely on the donor network for call routing (see requirements
numbers 4 and 7) and it can accommodate location and service
portability in the future.
In the U.S. and Canada, there is also the "N-1" guideline that
recommends that the network next to the destination network perform
the NPDB query if the NPDB query has not been done or the routing
information is not available (e.g., due to signaling interworking).
This is to prevent the call from being re-routed at the donor
network. In the U.S., the wireline carriers are required to support
NP in certain service areas in phases. The wireless carriers'
support of NP has been postponed until November 2002.
<Foster,McGarry,Yu> Informational - Expiration in September 2000 23
Number Portability in the GSTN: An Overview March 2000
APPENDIX B. NP Administration Process in the North America
B.1 Business Model
Figure B.1 shows the NP business model that was adopted in the U.S.
and Canada. The U.S. is divided into seven regions coinciding with
the boundaries of the original seven Regional Bell Operating Company
(RBOC) regions. This was done to facilitate the formation of
separate contracting and administrative areas (formed as limited
liability companies) for LNP in the US intentionally coinciding with
the original RBOC boundaries, thus enabling each RBOC to participate
singly in each of these areas.
NeuStar, Inc., formerly the Communication Industry Services business
unit with Lockheed Martin IMS, was selected in open competitive
procurements conducted by the industry to be the Number Portability
Administration Center (NPAC) provider for all the seven NPAC regions
(Midwest, Northeast, Mid-Atlantic, Southwest, Southeast, Western,
and West Coast) in the U.S. Lockheed Martin was subsequently named
as the NPAC provider in Canada as well. Each Limited Liability
Corp. (LLC) in the seven U.S. regions and Canadian Consortium
maintain largely identical contracts with with NeuStar covering each
region.
The FCC and North American Numbering Council (NANC) oversee the
technical and operational standards, originally developed by
Lockheed Martin and offered as open industry standards, and cost
recovery rulemakings.
Each LLC signed a master contract with NeuStar that set the prices
and terms and provided the form of User Agreement for NeuStar to
sign with each individual NPAC user. NPAC users are any bona fide
entity which either ports numbers or subscribes to updates to the
NPDB provided by the NPAC.
+--------+ +----------+
| FCC |------------>| State |
| NANC |<---+ +--->| PUCs |
+--------+ | | +----------+
| |
v v (Master
+--------------+ Agreement) +----------+
| Regional LLC |<----------->| NPAC |
| Contract | | (NeuStar)|
| Administrator| +----------+
+--------------+ ^
^ |
| |
v |
+----------+ |
| NPAC |<------------------+
| Users | (One User Agreement per User)
<Foster,McGarry,Yu> Informational - Expiration in September 2000 24
Number Portability in the GSTN: An Overview March 2000
+----------+
Figure B.1 - NP Administration Business Model in US.
B.2 NPAC Architecture
Figure B.2 shows the architecture for number portability
administration in the U.S. and Canada. NeuStar is the NPAC Service
Management System (SMS) service provider in the architecture
diagram.
(Carrier Facilities) : (NPAC Facilities)
+---------+ :
| SOA | :
| |-------------------+
+---------+ : |
: |
: +----------+
: | NPAC/SMS |
: | (NeuStar)|
: +----------+
: |
+---------+ +---------+ : |
| NPDB |---------| LSMS |-------------------+
|(e.g.SCP)| | | :
+---------+ +---------+ :
:
Figure B.2 - NPAC Architecture.
The interface between the Service Order Administration (SOA) and the
NPAC/SMS is for provisioning ported end-user data including the
support of the creation, cancellation, retrieval and update of
subscription, service provider, and network information. The SOAs
are operated by the local exchange carriers.
The interface between the Local Service Management System (LSMS) and
the NPAC/SMS is mainly used for downloading ported number
information from the NPAC/SMS to the LSMS. The LSMS then updates
the NPDB. A local exchange carrier may operate the LSMS if it
decides to deploy an NPDB itself. A service bureau can also operate
the LSMS to provision several LECs' NPDBs or operate the LSMS and
the NPDB for the operators (e.g., LECs or long distance carriers) to
query. The interface between the LSMS and the NPDB is up to the
entities that operate them.
The functional requirement specification developed under the
auspices of the North American Numbering Council (NANC) defines the
external functionality of the NPAC SMS [FRS]. The interfaces
between the NPAC/SMS and the SOA or LSMS use standards-based
communications and security technologies and are made public [IIS].
<Foster,McGarry,Yu> Informational - Expiration in September 2000 25
Number Portability in the GSTN: An Overview March 2000
Please note that only the information about the ported numbers is
stored at the NPAC databases and the NPDBs at present.
B.3 NPAC SMS Functions
This section provides a list of the NPAC SMS functions. Please see
[FRS] for details.
- Provisioning Service: For the new service provider to notify the
NPAC SMS of a provision request for a ported number and to send an
activation notice to activate the update from the NPAC SMS to the
LSMS.
- Disconnect Service: For handling disconnection of the telephony
service for a ported number.
- Repair Service: For resolving problems detected either by a Service
Provider or by a customer contacting a Service Provider.
- Conflict Resolution: For resolving a conflict when there is
disagreement between the old and new Service Providers as to who
will be providing service for the telephone number (TN). Please
note that the processes for obtaining authorization from the
customer to port a number are defined by the Service Providers.
The NPAC is not involved in obtaining or verifying customer
approval to port a telephone number.
- Disaster Recovery and Backup: For having a backup facility and the
disaster recovery procedures in place for planned and unplanned
downtime at the primary facility.
- Order Cancellation: For the new Service Provider to cancel a
previously submitted but not activated provision request.
- Audit Request: For troubleshooting customer problems and also as a
maintenance process to ensure data integrity across the entire NP
network.
- Report Request: For supporting report generation for pre-defined
and ad-hoc reports.
- Data Management: For managing network, Service Provider, and
customer subscription data. The network data defines the
configuration of the NP service and network and includes such data
as: participating Service Providers, NPA-NXXs that are portable,
and LRNs associated with each Service Provider. The Service
Provider data indicates who the NP Service Providers are and
includes location, contact name, security, routing, and network
interface information. The subscription data indicates how local
number portability should operate to meet subscribers' needs.
<Foster,McGarry,Yu> Informational - Expiration in September 2000 26
Number Portability in the GSTN: An Overview March 2000
- NPA-NXX Split Processing: For the administration of the
information for NPA split (the current NPA, the new NPA, and the
affected NXXs) plus the beginning and end date of the permissive
dialing period.
- Business Support: For supporting service providers that have
different needs for business hours and days available for porting.
- Notification Recovery: For allowing a Service Provider to capture,
via a recovery process, all notifications that were missed during
a downtime period for the Service Provider.
<Foster,McGarry,Yu> Informational - Expiration in September 2000 27
Number Portability in the GSTN: An Overview March 2000
Full Copyright Statement
"Copyright (C) The Internet Society (date). All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published
and distributed, in whole or in part, without restriction of any
kind, provided that the above copyright notice and this paragraph
are included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be
followed, or as required to translate it into.
This Internet-Draft is in conformance with Section 10 of RFC2026.
<Foster,McGarry,Yu> Informational - Expiration in September 2000 28
| PAFTECH AB 2003-2026 | 2026-04-24 05:52:37 |