One document matched: draft-claise-netflow-9-01.txt
Differences from draft-claise-netflow-9-00.txt
Internet Draft
Expiration: March 2003 B. Claise
Document: draft-claise-netflow-9-01.txt Cisco Systems
Category: Informational October 2002
Cisco Systems NetFlow Services Export Version 9
Status of this Memo
This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts. Internet-Drafts are draft documents valid for a maximum of
six months and may be updated, replaced, or obsolete by other
documents at any time. It is inappropriate to use Internet-Drafts as
reference material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
Abstract
This document discusses the Cisco Systems NetFlow services that
provide network administrators with access to IP flows information.
The NetFlow services create flow records that are then exported to a
NetFlow collector. The exported flow records can be used for a
variety of purposes including network management and planning,
accounting, departmental chargebacks, Internet service provider (ISP)
billing, data warehousing, data mining for marketing purposes, etc.
This document focuses on the most recent evolution of the NetFlow
flow record export format, which is known as version 9. The
distinguishing feature of the NetFlow version 9 export format
compared with previous formats, is that it is template based. The
templates (collections of fields along with the description and
structure) provide a flexible and extensible design to the flow-
record export format. This facilitates future enhancements to NetFlow
services without requiring changes to the basic flow record export
Claise Expires û March 2003 [Page 1]
Cisco Systems NetFlow Services Export Version 9 October 2002
format. Another advantage is that only the required fields are
exported within the flow record, which minimizes the consumed export
bandwidth.
Conventions used in this document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in
this document are to be interpreted as described in RFC 2119.
Table of Contents
1. Introduction...................................................2
1.1 Overview...................................................2
1.2 Applications...............................................3
2. Terminology....................................................5
3. NetFlow High-Level Picture on the Exporter.....................8
3.1 The NetFlow Process on the Exporter........................8
3.2 Flow Expiration............................................8
3.3 Transport Protocol.........................................8
4. Packet Layout..................................................9
5. Export Packet Format..........................................10
5.1 Header Format.............................................10
5.2 Template FlowSet Format...................................11
5.3 Data FlowSet Format.......................................13
6. Options.......................................................14
6.1 Options Template FlowSet..................................14
6.2 Options Data FlowSet......................................16
7. Template Management...........................................18
8. Field Type Definitions........................................19
9. The Collector's Side..........................................21
10. Examples.....................................................22
10.1 Packet Header Example....................................23
10.2 Template FlowSet Example.................................23
10.3 Data FlowSet Example.....................................24
10.4 Option Template FlowSet Example..........................25
10.5 Option Data FlowSet Example..............................25
11. References...................................................26
12. Authors......................................................26
13. Acknowledgments..............................................26
1. Introduction
1.1 Overview
NetFlow services data can be used for a variety of purposes. A
non-exhaustive list is available in the next section. This paper
discusses the most recent evolution of the NetFlow flow-record
Claise Informational [Page 2]
Cisco Systems NetFlow Services Export Version 9 October 2002
format, which is known as version 9. The distinguishing feature of
the NetFlow version 9 format, compared with previous formats, is
that it is template based. A template is a collection of fields with
the corresponding description of their structure and semantics.
This approach gives the following advantages:
- Because the template mechanism is flexible, it allows the export of
the required fields alone from the IP Flows to the NetFlow
collector. This helps to reduce the exported flow data volume and
possible memory savings at exporter and collector. Network load can
also be reduced by sending only the required information.
- Using the template mechanism, new fields can be added to NetFlow
flow records without changing the structure of the export record
format. With previous NetFlow versions, adding a new field in
the flow record implies a new version of the export protocol
format and a new version of the NetFlow collector that supports
the parsing of this new export protocol format.
- Templates that are sent to the collector contain the
structural information about the exported flow records fields.
Therefore, if the collector does not understand the semantics of
new fields, it can still interpret the flow record.
1.2 Applications
NetFlow services data enables several key customer applications:
Accounting and Billing
NetFlow services data provides fine-grained metering (for example,
flow records include such details as IP addresses, packet and byte
counts, timestamps, Type of Service (TOS), application ports, etc.)
for highly flexible and detailed resource usage accounting.
ISPs can use this information to migrate from single fee, flat-rate
billing to more flexible charging mechanisms based on time of day,
bandwidth usage, application usage, quality of service, etc.
Enterprise customers can use this information for departmental
chargeback or cost allocation for resource usage.
Network Planning
NetFlow services data captured over a long period of time allows
the possibility to track and anticipate network growth and plan
Claise Informational [Page 3]
Cisco Systems NetFlow Services Export Version 9 October 2002
upgrades to increase the number of routing devices, ports, or
higher-bandwidth interfaces.
NetFlow services data optimizes both strategic network planning
(peering, backbone upgrade planning, and routing policy planning) as
well as tactical network engineering decisions (upgrading the
router/link capacity). This helps to minimize the total cost of
network operations while maximizing network performance, capacity,
and reliability.
Peering Agreements
NetFlow services data enables ISP peering partners to measure the
volume and characteristics of traffic exchanged with other ISP
peers.
Traffic Engineering
NetFlow services data provides traffic engineering details for
a set of prefixes, that can be used in network optimization for load
balancing traffic across alternate paths or by forwarding traffic of
a certain set of prefixes on a preferred route.
Network Monitoring
NetFlow services data enables extensive near real-time network
monitoring capabilities. NetFlow services data analysis can be used
to display traffic patterns associated with routing devices and
switches on an individual, or network-wide basis. This can display
traffic or application-based views and therefore provide proactive
problem detection, efficient troubleshooting, and rapid problem
resolution.
Application Monitoring and Profiling
NetFlow services data enables content and service providers to view
detailed, time-based and application-based usage of a network. This
information allows planning and allocation of network and
application resources (such as Web server, gaming, or multimedia).
User Monitoring and Profiling
NetFlow services data provides a detailed understanding of
customer or end-user usage of network and application resources. This
information can then be used to efficiently plan and allocate
access, backbone and application resources as well as to detect and
resolve potential security and policy violations.
Security Analysis
Claise Informational [Page 4]
Cisco Systems NetFlow Services Export Version 9 October 2002
NetFlow services data provides details on source and destination
addresses, along with the start time of Flows and application ports.
This data can be used to analyze network security and identify
attacks.
NetFlow Data Warehousing and Mining
NetFlow services data (or derived information) can be stored for
later retrieval and analysis to support proactive marketing and
customer service programs. An example of this would be to determine
which applications and services are being used by internal and
external users and then target them for improved service such as
advertising and so on. This is especially useful for ISPs because
NetFlow Services data enables them to create better service
packaging.
2. Terminology
Various terms used in this document are described below:
IP Flow or Flow
A Flow is defined as a set of IP packets passing an Observation
Point in the network during a certain time interval. All packets
that belong to a particular Flow have a set of common properties
derived from the data contained in the packet and from the packet
treatment at the Observation Point.
Flow Record
A Flow Record provides information about an IP Flow that exists on
the Exporter. The Flow Records are also referred to as NetFlow
services data or NetFlow data in this document.
Exporter
A device (for example, a router) with NetFlow services enabled. The
Exporter monitors packets entering an Observation Point and creates
Flows out of these packets. The information from these Flows are
exported in the form of Flow Records to the Collector.
NetFlow Collector
The NetFlow Collector receives Flow Records from one or more
Exporters. It processes the received Export Packet, i.e. parses,
stores the Flow Record information. Flow records can be
optionally aggregated before being stored on the hard disk.
The NetFlow Collector is also referred to as the Collector in this
Claise Informational [Page 5]
Cisco Systems NetFlow Services Export Version 9 October 2002
document.
Observation Point
A location in the network where IP packets can be observed.
For example, one or a set of interfaces of the Exporter.
An Observation Domain is associated with every Observation Point.
Observation Domain:
The set of Observation Points, which is the largest aggregatable set
of Flow information at the Exporter is termed an Observation
Domain. Each Observation Domain presents itself a unique ID to the
Collector for identifying the Export Packets it generates.
For example, a router line card, composed of several interfaces with
each interface being an Observation Point.
Export Packet
A packet originating at the Exporter, which carries the Flow
Records of the Exporter and whose destination is the NetFlow
Collector.
Export Packet:
+--------+------------------------------------------------------+
| Packet | +-----------------+ +------------------+ +---------+ |
| Header | | FlowSet | | FlowSet | | FlowSet | |
| | +-----------------+ +------------------+ +---------+ |
+--------+------------------------------------------------------+
Packet Header
The first part of an Export Packet, which provides basic information
about the packet such as the NetFlow version, number of records
contained within the packet, sequence numbering, etc.
FlowSet
FlowSet is a generic term for a collection of records that have
similar structure. In an Export Packet, one or more FlowSets follow
the Packet Header.
There are three different types of FlowSets: Template FlowSet, Data
FlowSet and Option FlowSet. An Export Packet contains one or more
FlowSets, and the three FlowSet types can be mixed within the same
Export Packet.
Template Record
A Template Record is used to define the structure and interpretation
Claise Informational [Page 6]
Cisco Systems NetFlow Services Export Version 9 October 2002
of fields in a data record. Data records that correspond to a
template MAY appear in the same and/or subsequent Export Packets.
The template information is not necessarily carried in every Export
Packet. As such, the Collector MUST store the "Template Record" in
order to interpret the corresponding data records that are received
in subsequent data packets.
Template FlowSet
A Template FlowSet is a collection of one or more Template Records
that have been grouped together in an Export Packet.
Template ID
A unique number that distinguishes a Template Record from all
other Template Records produced by the same Observation Domain. A
NetFlow Collector that receives Export Packets from several
Observations Domains from the same Exporter MUST be aware that
uniqueness of Template ID is not guaranteed across Observation
Domains. For this reason, the NetFlow Collector MUST store the
address of the Exporter that produced the Template ID, along with the
Observation Domain, in order to enforce uniqueness.
Data FlowSet
A Data FlowSet is a collection of one or more Flow Records that are
grouped together in an Export Packet. A Data FlowSet contains
records that belong to the same Template ID. Each Data FlowSet
references a previously transmitted Template ID, which can be used to
parse the data contained within the Flow Records.
Options FlowSet
An Options FlowSet is a collection of one or more Options Templates
that have been grouped together in an Export Packet.
Options Template
A template that describes the format of the Flow measurement
parameters (for example, the sampling algorithm used, sampling
interval) done at the Exporter. Option Templates are identified by a
well-known Template ID.
Options Data Record
The data record that contains values of the Flow measurement
parameters corresponding to an Option Template.
FlowSet ID
Claise Informational [Page 7]
Cisco Systems NetFlow Services Export Version 9 October 2002
An ID used to distinguish the different FlowSets.
FlowSet IDs between 0 and 255 are reserved. Template FlowSet and
Option Template FlowSet use fixed FlowSet ID of 0 and 1,
respectively.
Data FlowSets have a FlowSet ID greater than 255.
3. NetFlow High-Level Picture on the Exporter
3.1 The NetFlow Process on the Exporter
The description of the NetFlow process (for example, sampled NetFlow,
full NetFlow, aggregation), that is, the way in which Flows are
created from the observed IP packets is beyond the scope of this
document.
3.2 Flow Expiration
A Flow is considered to be inactive if no packets belonging to this
Flow have been observed at the Observation Point for a given timeout
interval. A Flow can be exported under the following conditions:
1. If the Exporter can detect the end of a Flow, it
SHOULD export the Flow Records at the end of the Flow.
For example, a Flow generated by TCP [3] type of
traffic where the FIN or RST bits indicate the end of the Flow.
2. If the Flow has been inactive for a certain period of time. This
inactivity timeout SHOULD be configurable, with a minimum value
of 0 for a immediate expiration.
For example, a Flow generated by UDP [2] type of traffic.
3. For long-lasting Flows, the Exporter SHOULD export the Flow
Records on a regular basis. This periodicity SHOULD be
Configurable.
4. If the Exporter experiences internal constraints, a Flow MAY be
forced to expire prematurely (for example, counters wrapping or
low memory).
3.3 Transport Protocol
To achieve efficiency in terms of processing at the Exporter while
handling high volumes of Export Packet, the NetFlow Export Packet
is encapsulated into UDP [2] datagrams for export to the NetFlow
Claise Informational [Page 8]
Cisco Systems NetFlow Services Export Version 9 October 2002
Collector. However, NetFlow version 9 has been designed to be
transport protocol independent. Hence, it can also operate over
congestion-aware protocols such as TCP [3] or SCTP [4].
Note that the Exporter can export to multiple Collectors, using
independent transport protocols.
4. Packet Layout
An Export Packet consists of a Packet Header followed by one or
More FlowSets. The FlowSets can be any of the possible three types:
Template, Data, or Option.
Export Packet:
+--------+------------------------------------------+
| | +----------+ +---------+ +---------+ |
| Packet | | Template | | Data | | Option | |
| Header | | FlowSet | | FlowSet | | FlowSet | ... |
| | +----------+ +---------+ +---------+ |
+--------+------------------------------------------+
The possible combinations that can occur in an Export Packet are:
- An Export Packet that consists of interleaved Template, Data, and
Options FlowSets.
Export Packet:
+--------+-------------------------------------------------------+
| | +----------+ +---------+ +----------+ +---------+ |
| Packet | | Template | | Data | ... | Options | | Data | |
| Header | | FlowSet | | FlowSet | ... | FlowSet | | FlowSet | |
| | +----------+ +---------+ +----------+ +---------+ |
+--------+-------------------------------------------------------+
- An Export Packet consisting entirely of Data FlowSets. Once the
appropriate Template IDs have been defined and transmitted to the
NetFlow Collector device, the majority of Export Packets will
consist solely of Data FlowSets.
Export Packet:
+--------+----------------------------------------------+
| | +---------+ +---------+ +---------+ |
| Packet | | Data | ... | Data | ... | Data | |
Claise Informational [Page 9]
Cisco Systems NetFlow Services Export Version 9 October 2002
| Header | | FlowSet | ... | FlowSet | ... | FlowSet | |
| | +---------+ +---------+ +---------+ |
+--------+----------------------------------------------+
- An Export Packet consisting entirely of Template and Options
FlowSets. The Exporter MAY transmit a packet containing Template
FlowSets, ahead of time to help ensure that the NetFlow Collector
has the correct template information before receiving the first data
FlowSet.
Export Packet:
+--------+------------------------------------------------+
| | +----------+ +----------+ +---------+ |
| Packet | | Template | ... | Template | ... | Options | |
| Header | | FlowSet | ... | FlowSet | ... | FlowSet | |
| | +----------+ +----------+ +---------+ |
+--------+------------------------------------------------+
A Template FlowSet provides a description of the fields that would
be present in future Data FlowSets. These Data FlowSets MAY occur
later within the same Export Packet or in subsequent Export Packets.
The format of the Template, Data, and Options FlowSets will be
discussed later in this document.
5. Export Packet Format
5.1 Header Format
Note that the Packet Header format has been kept similar to the one
developed by the different versions of NetFlow defined by Cisco
Systems, for backward compatibility.
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Version Number | Count |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| sysUpTime |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| UNIX Secs |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Sequence Number |
Claise Informational [Page 10]
Cisco Systems NetFlow Services Export Version 9 October 2002
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Source ID |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Packet Header Field Descriptions
Version
Version of Flow Record format exported in this
packet. The value of this field is 0x0009 for the
current version.
Count
Count is the total number of record(s) in the Export
Packet, which is the sum total of Option FlowSet
record(s), Template FlowSet record(s) and Data FlowSet
record(s).
SysUpTime
Time in milliseconds since this device was first booted.
Refer to [1].
Unix Secs
Seconds since 0000 UTC 1970.
Sequence Number
Incremental sequence counter of all Export Packets sent
from the current Observation Domain by the Exporter. This
value will be cumulative, and can be used to identify
whether any Export Packets have been missed.
Source ID
The Source ID field is a 32-bit value that identifies the
Observation Domain. NetFlow Collectors SHOULD use the
combination of the source IP address and the Source ID
field to separate different export streams originating
from the same Exporter.
5.2 Template FlowSet Format
One of the key elements in the NetFlow format is the Template
FlowSet. Templates greatly enhance the flexibility of the Flow
Record format, because they allow the NetFlow Collector to process
Flow Records without necessarily knowing the interpretation of all
Claise Informational [Page 11]
Cisco Systems NetFlow Services Export Version 9 October 2002
the data in the Flow Record.
The format of the Template FlowSet is as follows:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| FlowSet ID = 0 | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Template ID 1 | Field Count |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Field Type 1 | Field Length 1 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Field Type 2 | Field Length 2 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ... | ... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Field Type N | Field Length N |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Template ID 2 | Field Count |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Field Type 1 | Field Length 1 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Field Type 2 | Field Length 2 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ... | ... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Field Type M | Field Length M |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Template FlowSet Field Descriptions
FlowSet ID
FlowSet ID value of 0 is reserved for Template FlowSet.
Length
Total length of this FlowSet. Because an individual Template
FlowSet MAY contain multiple Template Records, the Length
value MUST be used to determine the position of the next
FlowSet Record, which could be any type of FlowSet.
Length is the sum total of lengths of FlowSet ID, the Length
itself, and all Template Records within this FlowSet
Template ID.
Claise Informational [Page 12]
Cisco Systems NetFlow Services Export Version 9 October 2002
Template ID
Each of the newly generated Template Records is given a
unique Template ID. This uniqueness is local to the
Observation Domain that generated the Template ID.
Template IDs 0-255 are reserved for Template FlowSets,
Option Flowsets and other reserved FlowSet that would
be created in the future. Template IDs of Data FlowSets
are numbered from 256 up to 65535.
Field Count
Number of fields in this Template Record. Because a Template
FlowSet usually contains multiple Template Records, this
field allows the Collector to determine the end of the
current Template Record and the start of the next.
Field Type
A numeric value that represents the type of the field. Refer
to the section on ôField Type Definitionsö.
Field Length
The length of the corresponding Field Type, in bytes. Refer
to the section on ôField Type Definitionsö.
5.3 Data FlowSet Format
The format of the Data FlowSet is as follows:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| FlowSet ID = Template ID | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Record 1 - Field Value 1 | Record 1 - Field Value 2 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Record 1 - Field Value 3 | ... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Record 2 - Field Value 1 | Record 2 - Field Value 2 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Record 2 - Field Value 3 | ... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Record 3 - Field Value 1 | ... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Claise Informational [Page 13]
Cisco Systems NetFlow Services Export Version 9 October 2002
| ... | Padding |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Data FlowSet Field Descriptions
FlowSet ID = Template ID
Each Data FlowSet is associated with a FlowSet ID. The
FlowSet ID maps to a (previously generated) Template ID. The
Collector MUST use the FlowSet ID to find the corresponding
Template Record and decode the Flow Records from the FlowSet.
Length
The length of this FlowSet.
Length is the sum total of lengths of FlowSet ID, Length
itself, all Flow Records within this FlowSet, Template ID,
and the padding bytes if any.
Record N - Field Value N
The remainder of the Data FlowSet is a collection of Flow
Records each containing a set of field types and values. The
Type and Length of the fields have been previously defined
in the Template Record referenced by the FlowSet ID or
Template ID.
Padding
Padding SHOULD be inserted so that subsequent FlowSet starts
at 4 byte aligned boundary. It is important to note that the
Length field includes the padding bits.
Interpretation of the Data FlowSet format can be done only if the
Template FlowSet corresponding to the Template ID is available at
the Collector.
6. Options
6.1 Options Template FlowSet
The Options Template (and its corresponding Options Data Record) is
used to supply information about the NetFlow process configuration
or NetFlow process specific data, rather than supplying information
about IP Flows.
For example, the sample rate of a specific interface, if sampling is
supported, along with the sampling method used.
Claise Informational [Page 14]
Cisco Systems NetFlow Services Export Version 9 October 2002
The format of the Options Template FlowSet is detailed below:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| FlowSet ID = 1 | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Template ID | Option Scope Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Option Length | Scope 1 Field Type |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Scope 1 Field Length | ... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Scope N Field Length | Option 1 Field Type |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Option 1 Field Length | ... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Option N Field Length | Padding |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Options Template Field Definitions
FlowSet ID = 1
A FlowSet ID value of 1 is reserved for Option Template.
Length
Total length of this FlowSet. Each Options Templates MAY
contain multiple Template IDs. Thus, the Length value
MUST be used to determine the position of the next FlowSet
record, which could be either a Template FlowSet or Data
FlowSet.
Length is the sum total of lengths of FlowSet ID, the Length
itself, and all Template Records within this FlowSet
Template ID.
Template ID
Template ID of this Option Template. This value is greater
than 255.
Option Scope Length
The length in bytes of any Scope fields contained in the
Options Template (The use of "Scope" is described below).
Claise Informational [Page 15]
Cisco Systems NetFlow Services Export Version 9 October 2002
Options Length
The length (in bytes) of any options field definitions
contained in this Options Template.
Scope 1 Field Type
The relevant portion of the Exporter/NetFlow process to
which the Options Record refers. Currently defined values
are:
0x0001 System
0x0002 Interface
0x0003 Line Card
0x0004 Cache
0x0005 Template
For example, the NetFlow process can be implemented on a
per-interface basis, so if the options record were reporting
on how the NetFlow process is configured, the SCOPE for the
report would be 0x0002 (Interface). The associated interface
ID would then be carried in the associated Option Data
FlowSet.
Scope 1 Field Length
The length (in bytes) of the scope field, as it would appear
in an Options Record.
Option 1 Field Type
A numeric value that represents the type of the field that
would appear in the Options record. Refer to the Field Type
Definitions section.
Option 1 Field Length
The length (in bytes) of the Scope field.
Padding
Padding SHOULD be inserted so that subsequent FlowSet starts
at a 4 bytes aligned boundary. It is important to note that
the Length field includes the padding bits.
6.2 Options Data FlowSet
The Option Data Records are sent in Data FlowSets, on a regular
basis, but not with every Flow Record. How frequently these
Option Data Records are exported is configurable. See the ôTemplates
Claise Informational [Page 16]
Cisco Systems NetFlow Services Export Version 9 October 2002
Managementö section for more details.
The Options Data format is as follows:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| FlowSet ID = Template ID | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Record 1 - Scope 1 Value |Record 1 - Option Field 1 Value|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|Record 1 - Option Field 2 Value| ... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Record 2 - Scope 1 Value |Record 2 - Option Field 1 Value|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|Record 2 - Option Field 2 Value| ... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Record 3 - Scope 1 Value |Record 3 - Option Field 1 Value|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|Record 3 - Option Field 2 Value| ... |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ... | Padding |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Options Data FlowSet Field Descriptions
FlowSet ID = Template ID
Each group of Options Data Records within an Option Data
FlowSet is preceded by a FlowSet ID. The FlowSet ID maps to
a (previously generated) Template ID corresponding to this
Options Template. The Collector MUST use the FlowSet ID to
map the appropriate type and length to any field values that
follow.
Length
The length of this FlowSet.
Length is the sum total of lengths of FlowSet ID, Length
itself, all the Option Data Records within this FlowSet,
and the padding bytes if any.
Record N - Option Field N Value
The remainder of the Option Data FlowSet is a collection of
Flow Records each containing a set of field types and
Claise Informational [Page 17]
Cisco Systems NetFlow Services Export Version 9 October 2002
values. The Type and Length of the fields have been
previously defined in the Option Template Record referenced
by the FlowSet ID or Template ID.
Padding
Padding SHOULD be inserted so that subsequent FlowSet starts
at 4 byte aligned boundary. It is important to note that the
Length field includes the padding bits.
Interpretation of the Options Data FlowSet format can be done only
if the Options Template FlowSet corresponding the Template ID is
available at the Collector.
7. Template Management
The Template IDs must remain constant for the life of the NetFlow
process and the Exporter.
If the Exporter or the NetFlow process restarts due to some reason,
all information about Templates would be lost. New Template IDs
would be created. Template IDs are thus not guaranteed to be
consistent across an Exporter or NetFlow process restart.
A newly created template is assigned an unused Template ID from the
Exporter. If the template configuration is changed, then the current
Template ID is abandoned and not reused anymore until the NetFlow
process or Exporter restarts.
If a configured template on the Exporter is deleted, and re-
configured with exactly the same parameters, the same Template ID
COULD be reused.
The Exporter sends the Template FlowSet and Option Template FlowSet
under the following conditions:
1. After a NetFlow process restart, the Exporter MUST NOT send any
Data FlowSet without having the corresponding Template FlowSet
and the required Option Template FlowSet sent out in a previous
packet or in the same export packet. It MAY transmit the
Template FlowSet and Option Template FlowSet, without any Data
FlowSets, ahead of time to help ensuring that the Collector will
have the correct template information before receiving the first
data.
Claise Informational [Page 18]
Cisco Systems NetFlow Services Export Version 9 October 2002
2. In the event of a configuration changes, the Exporter SHOULD
send the incremental changes at an accelerated rate. In such a
case, it MAY transmit the changed Template FlowSet and Option
Template FlowSet, without any data, ahead of time to help ensure
that the Collector will have the correct template information
before receiving the first data.
3. On a regular basis, the Exporter MUST send all the Template
FlowSets and Options Template FlowSets to refresh the Collector.
Template IDs have a limited lifetime at the Collector and MUST
be periodically refreshed.
Two approaches are taken to make sure that Templates get
refreshed at the Collector:
* every N number of Export Packets.
* on regular basis, so every N number of minutes.
Both options MUST be user configurable.
When one of these expiry condition is met, the Exporter MUST
send the Template FlowSet and Option Template.
8. Field Type Definitions
The following table describes all the field type definitions that an
Exporter MAY support. The fields are a selection of Packet Header
fields, lookup results (for example the AS numbers or the subnet
masks), properties of the packet itself such as length.
Field Type Value Length Description
(bytes)
counter with length
IN_BYTES 1 N N x 8 bits for bytes
associated with an IP Flow
counter with length
IN_PKTS 2 N N x 8 bits for packets
associated with an IP Flow
FLOWS 3 4 Number of Flows
that were aggregated
PROT 4 1 IP protocol byte
TOS 5 1 Type of service byte
Claise Informational [Page 19]
Cisco Systems NetFlow Services Export Version 9 October 2002
TCP_FLAGS 6 1 TCP Flags (cumulative OR
of TCP flags)
TCP/UDP source port number
L4_SRC_PORT 7 2 (e.g., FTP, Telnet,
etc... ,or equivalent)
IP_SRC_ADDR 8 N Source IP Address
IPv4 have N=4
IPv6 have N=16
SRC_MASK 9 1 source route mask bits
INPUT_SNMP 10 2 Input interface index
TCP/UDP destination port
L4_DST_PORT 11 2 number (e.g., FTP, Telnet,
etc... ,or equivalent)
IP_DST_ADDR 12 N Destination IP Address
IPv4 have N=4
IPv6 have N=16
DST_MASK 13 1 destination route mask bits
OUTPUT_SNMP 14 2 Output interface index
IP_NEXT_HOP 15 N Next hop router's IP
address
IPv4 have N=4
IPv6 have N=16
SRC_AS 16 4 Source BGP Autonomous
System number
DST_AS 17 4 Destination BGP Autonomous
System number
BGP_NEXT_HOP 18 N Next-hop router's IP
in the BGP domain
IPv4 have N=4
IPv6 have N=16
Claise Informational [Page 20]
Cisco Systems NetFlow Services Export Version 9 October 2002
MUL_DPKTS 19 4 Packet count for IP
multicast
MUL_DOCTETS 20 4 Octet (byte) count for IP
multicast
SysUptime at which the
LAST_SWITCHED 21 4 last packet of this Flow
was switched
SysUptime at which the
FIRST_SWITCHED 22 4 first packet of this Flow
was switched
PKTS 24 8 64-bit counter for packets
associated with an IP Flow
TOTAL_BYTES_EXP 40 4 Number of Bytes exported by
the Observation Domain
TOTAL_EXP_PKTS_SENT 41 4 Number of Packets exported
by the Observation Domain
TOTAL_FLOWS_EXP 42 4 Number of Flows exported by
the Observation Domain
The value field is an numeric identifier for the field type.
When extensibility is required, the new field types will be added
to the above list. The new field types have to be updated on
the Exporter and Collector. However, the NetFlow export format
itself would remain unchanged. Refer to the latest documentation at
http://www.cisco.com for the newly updated list.
9. The Collector's Side
The Collector will receive template definitions from the Exporter,
normally before receiving Flow Records. The Flow Records can then be
decoded and stored locally on the devices. If the template
definitions have not been received at the time a Flow Record is
received, the Collector SHOULD store the Flow Record and decode it
after the template definition is received. A Collector device MUST
Claise Informational [Page 21]
Cisco Systems NetFlow Services Export Version 9 October 2002
NOT assume that the Data FlowSet and the associated Template IDs are
exported in the same Export Packet.
The Collector MUST NOT assume that one and only one Template FlowSet
is present in an Export Packet.
The life of a template at the Collector is limited to a fixed
refresh timeout. Templates not refreshed from the Exporter within
the timeout are expired at the Collector. The Collector MUST NOT
attempt to decode the Flow Records with an expired Template.
At any given time the Collector SHOULD maintain the following for
all the current Templates and Options Templates:
<Exporter, Observation Domain, Template ID, Template Def, Last
Received>
Note that the Observation Domain is characterized by the Source ID
field from the Export Packet.
Keep in mind that the Template IDs are unique per Exporter and per
Observation Domain.
If a new Template definition is received on the Collector (for
example in the case of an Exporter restart) it MUST immediately
override the existing Template definition.
10. Examples
Let's consider the example of an Export Packet composed of a
Template FlowSet, of a Data FlowSet (which contains three Flow
Records), of one Option Template and of one Option Data FlowSet
(which contains 2 Records)
Export Packet:
+--------+---------------------------------------. . .
| | +--------------+ +------------------+
| Packet | | Template | | Data |
| Header | | FlowSet | | FlowSet | . . .
| | | (1 Template) | | (3 Flow Records) |
| | +--------------+ +------------------+
+--------+---------------------------------------. . .
. . .+-------------------------------------------+
+------------------+ +------------------+ |
| Option | | Option | |
Claise Informational [Page 22]
Cisco Systems NetFlow Services Export Version 9 October 2002
. . .| Template FlowSet | | Data FlowSet | |
| (1 Template) | | (2 Records) | |
+------------------+ +------------------+ |
. . .-------------------------------------------+
10.1 Packet Header Example
The Packet Header is composed of:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Version = 0x0009 | Count = 7 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| sysUpTime |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| UNIX Secs |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Sequence Number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Source ID |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
10.2 Template FlowSet Example
We want to report the following Field Types:
- The source IP address (IPv4), so the length is 4
- The destination IP address (IPv4), so the length is 4
- The next-hop IP address (IPv4), so the length is 4
- The number of bytes of the Flow
- The number of packets of the Flow
Therefore, the Template FlowSet will be composed of the following:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| FlowSet ID = 0 | Length = 28 bytes |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Template ID 256 | Field Count = 5 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| IP_SRC_ADDR = 0x0008 | Field Length = 4 |
Claise Informational [Page 23]
Cisco Systems NetFlow Services Export Version 9 October 2002
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| IP_DST_ADDR = 0x000C | Field Length = 4 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| IP_NEXT_HOP = 0x000F | Field Length = 4 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| IN_PKTS = 0x0002 | Field Length = 4 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| IN_BYTES = 0x0001 | Field Length = 4 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
10.3 Data FlowSet Example
In this example, we report the following three Flow records:
Src IP addr. | Dst IP addr. | Next Hop addr. | Packet | Bytes
| | | Number | Number
---------------------------------------------------------------
198.168.1.12 | 10.5.12.254 | 192.168.1.1 | 5009 | 5344385
192.168.1.27 | 10.5.12.23 | 192.168.1.1 | 748 | 388934
192.168.1.56 | 10.5.12.65 | 192.168.1.1 | 5 | 6534
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| FlowSet ID = 256 | Length = 64 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 198.168.1.12 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 10.5.12.254 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 192.168.1.1 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 5009 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 5344385 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 192.168.1.27 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 10.5.12.23 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 192.168.1.1 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 748 |
Claise Informational [Page 24]
Cisco Systems NetFlow Services Export Version 9 October 2002
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 388934 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 192.168.1.56 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 10.5.12.65 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 192.168.1.1 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 5 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 6534 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Note that padding was not necessary in this example.
10.4 Option Template FlowSet Example
Per line card (the Exporter being composed of two Line Cards), we
want to report the following Field Types:
- Total number of Export Packets
- Total number of exported Flows
The format of the Options Template FlowSet is as follows:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| FlowSet ID = 1 | Length = 24 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Template ID 257 | Option Scope Length = 4 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Option Length = 8 | Scope 1 Field Type = 0x0003 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Scope 1 Field Length = 2 | TOTAL_EXP_PKTS_SENT = 41 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Field Length = 4 | TOTAL_FLOWS_EXP = 42 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Field Length = 4 | Padding |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
10.5 Option Data FlowSet Example
Claise Informational [Page 25]
Cisco Systems NetFlow Services Export Version 9 October 2002
In this example, we report the following two records:
Line Card ID | Export Packet| Export Flow
------------------------------------------
Line Card 1 | 345 | 10201
Line Card 2 | 690 | 20402
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| FlowSet ID = 257 | Length = 14 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 1 | 345 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 10201 | 2 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 2 | 690 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| 20402 | Padding |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
11. References
[1] J. Case et al, "Management Information Base for Version 2 of
the Simple Network Management Protocol (SNMPv2)" RFC 1907,
January 1996
[2] J. Postel, "User Datagram Protocol" RFC 768, August 1980
[3] "TRANSMISSION CONTROL PROTOCOL DARPA INTERNET PROGRAM PROTOCOL
SPECIFICATION", RFC 793, September 1981
[4] R. Stewart et al, "Stream Control Transmission Protocol" RFC
2960, October 2000
12. Authors
This document was jointly written by Vamsidhar Valluri
<vvalluri@cisco.com>, Martin Djernaes <djernaes@cisco.com>, Ganesh
Sadasivan gsadasiv@cisco.com and Benoit Claise bclaise@cisco.com.
13. Acknowledgments
Claise Informational [Page 26]
Cisco Systems NetFlow Services Export Version 9 October 2002
I would like to thank Pritam Shah for his valuable technical
feedback.
Authors Addresses
Benoit Claise
Cisco Systems
De Kleetlaan 6a b1
1831 Diegem
Belgium
Phone: +32 2 704 5622
Email: bclaise@cisco.com
Ganesh Sadasivan
Cisco Systems, Inc.
3750 Cisco Way
San Jose, CA 95134
USA
Phone: +1 (408) 527-0251
Email: gsadasiv@cisco.com
Vamsi Valluri
Cisco Systems, Inc.
510 McCarthy Blvd.
San Jose, CA 95035
USA
Phone: +1 (408) 525-1835
Email: vvalluri@cisco.com
Martin Djernaes
Cisco Systems, Inc.
510 McCarthy Blvd.
San Jose, CA 95035
USA
Phone: +1 (408) 853-1676
Email: djernaes@cisco.com
Claise Informational [Page 27]
| PAFTECH AB 2003-2026 | 2026-04-23 03:24:51 |