One document matched: draft-boulton-xcon-msrp-conferencing-00.txt
XCON Working Group C. Boulton
Internet-Draft Ubiquity Software Corporation
Expires: December 19, 2005 M. Barnes
Nortel
June 17, 2005
Centralized Conferencing (XCON) Using the Message Session Relay
Protocol (MSRP)
draft-boulton-xcon-msrp-conferencing-00
Status of this Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on December 19, 2005.
Copyright Notice
Copyright (C) The Internet Society (2005).
Abstract
A Centralized Conference as defined by the XCON working group is both
signaling and protocol agnostic. The primary focus of the XCON work
has been centered on the Session Initiation Protocol for signaling
and Audio/Video for the media types. This document defines the
mechanisms, in the context of the XCON framework, required when using
the Message Session Relay Protocol (MSRP) in a Centralized Conference
Boulton & Barnes Expires December 19, 2005 [Page 1]
Internet-Draft MSRP Conferencing June 2005
(XCON).
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Conventions and Terminology . . . . . . . . . . . . . . . . . 3
3. Overview of Operation . . . . . . . . . . . . . . . . . . . . 3
4. Text Sidebar . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. Private Message . . . . . . . . . . . . . . . . . . . . . . . 7
6. References . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.1 Normative References . . . . . . . . . . . . . . . . . . . 8
6.2 Informative References . . . . . . . . . . . . . . . . . . 8
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . 9
Intellectual Property and Copyright Statements . . . . . . . . 10
Boulton & Barnes Expires December 19, 2005 [Page 2]
Internet-Draft MSRP Conferencing June 2005
1. Introduction
A Centralized Conference as defined by the XCON working group is both
signaling and protocol agnostic. The primary focus of the XCON work
has been centered on the Session Initiation Protocol for signaling
and Audio/Video for the media types. The requirements to support
conferences of session-based instant messages, private messaging, and
sidebars are introduced in [6]. This document defines the mechanisms
and associated framework elements involved when using the Message
Session Relay Protocol(MSRP) in a Centralized Conference(XCON) in
support of those requirements.
[Editors Note: This document is still in early stages of development
and is intended to invoke discussion. It is not intended to provide
exact solutions at his stage, but rather explores a potential
approach to a solution.]
This document has been constructed in full compliance with both the
XCON Framework[2] document and the SIPPING Conference Framework [3]
document. The XCON Framework provides the data model and interfaces
to be used while the SIPPING Framework provides details of the SIP
signaling protocol operations. For the purpose of this document,
MSRP will be discussed in the context of SIP being the carrying
protocol, as defined in the core MSRP [4] specification.
2. Conventions and Terminology
In this document, the key words "MUST", "MUST NOT", "REQUIRED",
"SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT
RECOMMENDED", "MAY", and "OPTIONAL" are to be interpreted as
described in BCP 14, RFC 2119 [1] and indicate requirement levels for
compliant implementations.
3. Overview of Operation
MSRP is defined as a peer-to-peer protocol that enables a direct
connection between two compliant endpoints, unless an MSRP relay is
inserted in the MSRP signaling path. The MSRP Relay specification
[5] details the associated functionality with a relay in the
signaling path. Centralized conferencing using MSRP can be achieved
by the Conference Server appearing as an MSRP endpoint for Conference
Participants.
Figure 1 provides an illustration of MSRP clients having a direct,
1:1 connection to the Conference server. This type of functionality
can be roughly categorized as a hybrid MSRP entity that combines both
MSRP client and MSRP relay functionality. An MSRP SEND sent to the
conference will arrive at the conference server and then be
Boulton & Barnes Expires December 19, 2005 [Page 3]
Internet-Draft MSRP Conferencing June 2005
replicated to all appropriate MSRP sessions.
+--------+
| MSRP |
| Client |
| |
+--------+
|
|
|
|
|
|
v
+-----------+
+--------+ | | +--------+
| MSRP | | MSRP | | MSRP |
| Client |-------------->|Conference |<--------------| Client |
| | | Server | | |
+--------+ | | +--------+
+-----------+
^
|
|
|
|
|
|
+--------+
| XCON |
| Client |
| |
+--------+
Figure 1: Client Connection
As mentioned previously, an MSRP client connecting to a Conference
server has a 1:1 relationship with the MSRP signaling entity, each
having a unique MSRP session ID (session ID's are contained in MSRP
URLs). When referring to MSRP session ID's the document is making
reference to the locally (at Conference Server) generated Session ID
that is inserted into the local Path SDP attribute and used for MSRP
session signaling identification. An important concept in this
proposal is the creation and management of MSRP sessions. It is
important that each MSRP session created, as identified by the unique
Boulton & Barnes Expires December 19, 2005 [Page 4]
Internet-Draft MSRP Conferencing June 2005
session ID, is explicitly tied to an associated Conference,
represented by the Conference Identifier. This provides the relevant
association between MSRP and a Conference. An example is illustrated
in Figure 2.
-------------------------------------------
| XCON Conference Identifier |
-------------------------------------------
| MSRP Session ID=8asjdhk |
| MSRP Session ID=38iuhds |
| MSRP Session ID=djiowid |
| MSRP Session ID=389hewu |
-------------------------------------------
Figure 2: Session Association
On issuing an MSRP request to any of the MSRP sessions that are
members of a Conference, the message will be replicated to all other
MSRP Sessions that are participants of the Conference.
An MSRP capable client wishing to join a conference uses standardized
XCON mechanisms for creating and joining a Conference. SIP signaling
mechanisms for creating and joining a conference are defined in
SIPPING Conference Framework [3] and non signaling specific
mechanisms are defined in the XCON Framework [2].
Each conference created in accordance with the XCON data model (as
defined in the XCON framework) has a unique internal representation
in the form of a Conference Data object. This representation
provides a unique external key for use in various conference
operations (e.g. Identify a specific conference for use by the Data
Manipulation Protocol [ref]). This document will use the unique
Conference Object identifier, in association with a unique user
identifier, as a means to identify an MSRP session in association
with a conference represented by the Conference Identifier.
[Editors Note: The following is based on current discussion in the
XCON framework and would align appropriately]
This can be achieved as follows:
o Various mechanisms are used to create a conference within an XCON
compliant Conference server. These include using the Data
Manipulation Protocol and SIP signaling to generate a unique
conference identifier from the Conference Factory. The XCON
Conference Identifier might look something like:- xcon:conf=1234.
Boulton & Barnes Expires December 19, 2005 [Page 5]
Internet-Draft MSRP Conferencing June 2005
o It is proposed that the Conference system and MSRP signaling
interface use the Conference Identifier when creating MSRP
sessions for conference participants. As part of the SIP offer/
answer exchange between the Focus and an MSRP client when adding
an MSRP clients to a conference, the focus must create appropriate
SDP that complies with section 8.1 of [4].
o As part of the SDP construction for the offer/answer the
Conference Focus has to provide an 'msrp:' URL, as defined in
section 6 of [4]. It is proposed that the contents of this URL is
the primary identifier for the associated conference instance.
The unique identifier for an MSRP session is currently located
within the SDP 'a=path' attribute, as shown by the string '2s93i9'
in Figure 3. This session Identifier is created by an MSRP client
for identification purposes and so adding semantics only impacts
the creating entity.
a=path:msrp://alice.example.com:7394/2s93i9;tcp
Figure 3: Example MSRP URL
o A conference server will use the semantics defined for the session
identifier in an 'msrp' URL to identify both a specific conference
and a participating user. The Focus MUST ensure that the
uniqueness of the whole MSRP URL is maintained for compliance to
the core MSRP specification . An example of how this could be
achieved is defined in Figure 4.
a=path:msrp://alice.example.com:7394/Conf=123456~userID=654321~;tcp
Figure 4: Example MSRP URL
o In this example the session identifier contains the following
string 'Conf=123456~userID=654321~'. This string can be broken
down to several into pieces of conference specific information.
The first part of the string contains the Conference Identifier
for which this message is intended. An MSRP conference entity
receiving an MSRP SEND request would search for the string 'Conf='
and extract the identifier from the '=' sign to the '~' character.
The MSRP conference entity can then compare with existing
conference instances to see if there is a match. Using semantics
in the session identifier allows the reuse of connections to the
conference system.
o After extracting the conference identifier from the MSRP URL, the
MSRP entity can then extract the unique user identifier. After
the first '~' sign, a unique user identifier can be found of the
form userID=654321~ from Figure 4. This allows the controlling
MSRP entity to internally identify the user issuing the SEND
request and then send the request to all other participants in the
Boulton & Barnes Expires December 19, 2005 [Page 6]
Internet-Draft MSRP Conferencing June 2005
conference instance.
o Using this mechanism does not make any additional requirements on
MSRP clients. The information contained in the MSRP URL is just
viewed as a random session identifier.
4. Text Sidebar
The Session Based Messaging Conferencing requirements document [6]
identifies the requirement (REQ-GEN-12) to set up a sidebar
conference with one or more participants of the conference.
The concept of a 'sidebar' in an XCON compliant conference system is
fully described in section 7.3 of the XCON Framework document [2].
The creation, manipulation and deletion of sidebars for MSRP based
sessions has the same principles.
[Editors note: see current sidebar proposal in the XCON FW relating
to cloning a conference object with no associated time reference.
This provides a current sub-conference.]
Creating a sidebar representation for MSRP would have internal
ramifications in a Conference System. It would involve the creation
of a cloned conference object (see editor's note above) that
associates the appropriate Conference users. This would then involve
a new session being established to convey the Sidebar information.
The session would be created in the same manner as described in
Section 3 with a new 'conf=' parameter in the 'msrp' session ID but
the consistent 'userID'. This would again create unique session
identifiers that can be associated with the sidebar instance. The
Conference system would also manage the mapping between the sidebar
and the main conference.
[Editors note: Lots more detail to insert.]
5. Private Message
The Session Based Messaging Conferencing Requirements document [6]
identifies a set of requirements to support the ability to send a
private message to another participant in a conference. This message
would not be seen by any other conference participants.
The mechanism for achieving this follows on from the semantics
contained in the construction of the identifying 'a=path' attribute,
as described in Section 3. This example used the 'conf=' and
'userID=' identifiers in the session identifier of the 'msrp' URL.
It is proposed that if a user wishes to send a private message to
another user in a conference it extends the use of such identifiers.
This can be achieved using an optional 'priv=' identifier. If this
Boulton & Barnes Expires December 19, 2005 [Page 7]
Internet-Draft MSRP Conferencing June 2005
identifier exists within a conference, then the SEND message is only
distributed to the one location contained in the 'priv=' identifier.
If the identifier does not exist within a Conference, the SEND
message SHOULD NOT be distributed to the Conference members and
should be rejected with an appropriate error response.
An example of an 'msrp' URL containing the 'priv=' identifier is
contained in Figure 5
a=path:msrp://alice.example.com:7394/Conf=123456~userID=654321~priv=abcdef~;tcp
Figure 5: Example MSRP Private Message URL
[Editors note: Need to explain how a conference client obtains
individual participant identifiers. The initial inclination is to
propose the conference package rather than define a new Event
package, but this is also a more general question relating to the
XCON FW, as well (i.e. we need to complete and agree the work on
identifiers there to better understand the general approach).]
This section describes a mechanism to send a private message to one
other participant in a conference. If there is a desire to involve
more than one other participant in the private messaging, then a
sidebar would be used.
6. References
6.1 Normative References
[1] Bradner, S., "Key words for use in RFCs to Indicate Requirement
Levels", BCP 14, RFC 2119, March 1997.
6.2 Informative References
[2] Barnes, M., "A Framework and Data Model for Centralized
Conferencing", draft-ietf-xcon-framework-00 (work in progress),
May 2005.
[3] Rosenberg, J., "A Framework for Conferencing with the Session
Initiation Protocol",
draft-ietf-sipping-conferencing-framework-05 (work in progress),
May 2005.
[4] Campbell, B., "The Message Session Relay Protocol",
draft-ietf-simple-message-sessions-10 (work in progress),
February 2005.
[5] Jennings, C. and R. Mahy, "Relay Extensions for Message Sessions
Boulton & Barnes Expires December 19, 2005 [Page 8]
Internet-Draft MSRP Conferencing June 2005
Relay Protocol (MSRP)", draft-ietf-simple-msrp-relays-03 (work
in progress), February 2005.
[6] Garcia-Martin, M., "Requirements for private messaging in
centralized conference environements",
draft-garcia-xcon-private-messaging-reqs-00 (work in progress),
March 2005.
Authors' Addresses
Chris Boulton
Ubiquity Software Corporation
Building 3
Wern Fawr Lane
St Mellons
Cardiff, South Wales CF3 5EA
Email: cboulton@ubiquitysoftware.com
Mary Barnes
Nortel
2380 Performance Drive
Richardson, TX
Email: mary.barnes@nortel.com
Boulton & Barnes Expires December 19, 2005 [Page 9]
Internet-Draft MSRP Conferencing June 2005
Intellectual Property Statement
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Disclaimer of Validity
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Copyright Statement
Copyright (C) The Internet Society (2005). This document is subject
to the rights, licenses and restrictions contained in BCP 78, and
except as set forth therein, the authors retain all their rights.
Acknowledgment
Funding for the RFC Editor function is currently provided by the
Internet Society.
Boulton & Barnes Expires December 19, 2005 [Page 10]
| PAFTECH AB 2003-2026 | 2026-04-23 23:29:38 |