One document matched: draft-boschi-ipfix-biflow-01.txt
Differences from draft-boschi-ipfix-biflow-00.txt
Biflow implementation support in IPFIX
Internet-Draft E. Boschi
Document: draft-boschi-ipfix-biflow-01.txt Hitachi Europe
Expires: April 2006 B. Trammell
CERT/NetSA
October 2005
Biflow implementation support in IPFIX
draft-boschi-ipfix-biflow-01.txt
Status of this Memo
By submitting this Internet-Draft, each author represents that
any applicable patent or other IPR claims of which he or she is
aware have been or will be disclosed, and any of which he or she
becomes aware will be disclosed, in accordance with Section 6 of
BCP 79.
Internet-Drafts are working documents of the Internet
Engineering Task Force (IETF), its areas, and its working
groups. Note that other groups may also distribute working
documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six
months and may be updated, replaced, or obsoleted by other
documents at any time. It is inappropriate to use
Internet-Drafts as reference material or to cite them other than
as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on April 27, 2006.
Copyright Notice
Copyright (C) The Internet Society (2005).
Boschi, Trammell Expires April 2006 [Page 1]
Biflow implementation support in IPFIX
Abstract
This document describes how bidirectional flows (biflows) can be
implemented in the IP Flow Information Export (IPFIX) protocol.
We propose a variety of methods for biflow export, including an
extension to the IPFIX Information Model that allows the
specification of biflow semantics and a set of counters needed
for biflow processing.
Table of Contents
1. Introduction·············································2
2. Terminology··············································2
3. Biflow Implementation Strategies·························3
3.1 Biflow Semantics·········································3
3.2 Two-Record Flow Association using flowId IE··············4
3.2.1 Example.................................................4
3.3 Multiple Record Flow Aggregation using flowId IE·········4
3.3.1 Example.................................................5
3.4 Single Record biflows using directionDomain IE···········5
3.4.1 New Information Elements for Single Record biflows......6
3.4.2 Example................................................10
4. IANA Considerations·····································10
5. Security Considerations·································11
6. References··············································11
6.1 Normative References····································11
6.2 Informative References··································11
7. Acknowledgements········································11
8. Author's Addresses······································11
9. Intellectual Property Statement·························12
10. Copyright Statement·····································12
11. Disclaimer··············································12
1. Introduction
Many flow analysis tasks benefit from easy association of the
upstream and downstream flows of a bidirectional communication,
e.g., separating answered and unanswered TCP requests,
calculating round trip times, etc. Metering processes that are
not part of an asymmetric routing infrastructure are well
positioned to observe bidirectional flows, and IPFIX is very
nearly complete as a solution for exporting biflow data.
We propose several methods to export biflow information using
IPFIX. Two of these methods do not require any changes to the
IPFIX information model, at the expense of export and collection
efficiency. The final method requires an extension to the IPFIX
Information Model to include some biflow-related Information
Elements (IEs).
2. Terminology
Uniflow (unidirectional flow)
A uniflow is a set of IP packets passing an Observation
Point in the network during a certain time interval. All
packets belonging to a particular Uniflow have a set of
common properties. Each property is defined as the result
of applying a function to the values of:
1. One or more packet header fields, transport header
fields, or application header fields.
Boschi, Trammell Expires April 2006 [Page 2]
Biflow implementation support in IPFIX
2. One or more characteristics of the packet itself.
3. One or more fields derived from packet treatment.
A packet is said to belong to a Uniflow if it completely
satisfies all the defined properties of the Uniflow.
This definition is simply the IPFIX definition of an IP
Flow [IPFIX-PROTO].
Biflow (bidirectional flow)
A biflow is the product of matching the two uniflow sides
of a bidirectional communication session (e.g.,
TCP session, UDP DNS question and answer) into a single
entity. The semantics of "source" and "destination"
information elements within the context of a given biflow
are variable; since "source" and "destination" are not
derived directly from their respective packet header
fields, the IPFIX definition of IP Flow alone is not
sufficient to describe biflows.
3. Biflow Implementation Strategies
This section introduces the problems associated with
representing biflows in IPFIX, and presents a variety of
strategies for implementing biflow support.
3.1 Biflow Semantics
When handling uniflows, the semantics of "source" and
"destination" information elements are clearly defined by the
semantics of the underlying packet header data. When grouping
biflows into single IPFIX data records, the definitions of
"source" and "destination" become less clear.
The most basic method for classifying the two addresses in a
biflow is to define the source address of the flow as the source
address of the first packet seen in that flow by the metering
process. Some metering technologies may attempt to improve upon
this method using some knowledge of the transport or application
protocols (e.g., TCP flags, DNS question/answer counts) in order
to define the source address of the flow as the connection or
transaction initiator. In either case, the design is the same:
one of the underlying uniflows is assumed to be in the "forward"
direction, and one in the "reverse" direction; the "forward"
uniflow is selected based upon some characteristic of the
connection itself.
Another way to classify biflow addresses is by perimeter; in
this method, a metering process discriminates between "inside"
and "outside" the network, and defines the source address as
the address on one side of this perimeter (generally the
"outside" address; defining source loosely as "attacker").
Perimeter biflows may require additional information elements to
identify the flow initiator, if such functionality is supported
by the metering process. This revision of this draft does not
address perimeter biflows further.
These two are by no means an exhaustive list of biflow
semantics. However, IPFIX should aim to provide better support
for the simpler, more common semantics in preference to more
exotic schemes.
Boschi, Trammell Expires April 2006 [Page 3]
Biflow implementation support in IPFIX
3.2 Two-Record Flow Association using flowId IE
The simplest way to implement biflow support using IPFIX is to
sidestep the single-record unification entirely, and annotate
two uniflow records as being part of the same biflow by using
the existing flowId information element. If an exporting process
supports biflow export via this method, it is recommended that
it export the two flow data records comprising the biflow appear
sequentially, within the same data set, in order of start time.
This ensures that the collecting process does not need to cache
more than a single flow to support biflow reassembly on its end.
This method has the advantage of simplicity and minimal impact
on the protocol. However, as two uniflows in a single biflow
share all flow key data, it is not the most efficient method for
transporting biflow data.
3.2.1 Example
Both data records representing each biflow are described by the
same template, which follows the pattern below:
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Set ID = 2 | Length = 12 + 4m + 4n |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Template ID >= 256 | Field Count = 1 + m + n |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| FlowId = 148 | Field Length = 4 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| Flow Key IE 1 | Field Length (Key 1) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. . .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| Flow Key IE n | Field Length (Key n) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| Flow Value IE 1 | Field Length (Value 1) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. . .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| Flow Value IE m | Field Length (Value m) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The fields have been simply distinguished by FlowID (that
identifies the two uniflows as part of the same biflow), flow
key fields and flow value IEs to be exported.
3.3 Multiple Record Flow Aggregation using flowId IE
The main shortcoming of the previous method is the replication
of information exported, since two uniflows in a biflow share
all flow key data. This second method aggregates the flow fields
common to both uniflows sending them in an Option record with
FlowID as scope. The FlowID IE represents the identifier of the
biflow. The two uniflow records part of the same biflow export
the flow information (but not the flow key fields), the flowID
and the source or the directionDomain IE (see section 3.4.1.15)
to identify the two uniflows.
Using the source doesn't require any extension to the
Information Model, but exporting three records per biflow and
using an IP address (especially an IPv6 address) to identify
Boschi, Trammell Expires April 2006 [Page 4]
Biflow implementation support in IPFIX
If an exporting process supports biflow export via this method,
it MUST ensure that the option record is sent first.
The exporter sends the flow key fields just once and
subsequently refers to them using the flowID. This method makes
sense when the records are exported at regular intervals but
doesn't introduce an improvement if the data is exported just at
the end of the flow.
3.3.1 Example
The flow keys are exported in an options data record described
by a template following the pattern below:
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Set ID = 3 | Length = 14 + 4n (+2) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Template ID >= 256 | Field Count = 1 + n |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Scope Field Count = 1 |0| FlowID = 148 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Scope Field Length = 4 |0| Flow Key IE 1 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Field Length (Key 1) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. . .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| Flow Key IE n |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Field Length (Key n) | Padding (optional) = 0 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Each of the flow value data records is defined by a template
following the pattern below:
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Set ID = 2 | Length = 16 + 4m |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Template ID > 256 | Field Count = 2 + m |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| FlowId = 148 | Field Length = 4 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| sourceIPv4Address = 8 | Field Length = 4 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| Flow Value IE 1 | Field Length (Value 1) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. . .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| Flow Value IE m | Field Length (Value m) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
3.4 Single Record biflows using directionDomain IE
Biflows can be represented in IPFIX using a single data record
per flow by extending the IPFIX information model. First, a set
of "reverse" counters are defined to count packets sent by the
biflow destination, and the current "forward" counters are
defined to count packets send by the biflow source. Second, an
additional information element, directionDomain, is defined to
specify the semantics of biflow source and destination.
The reverse counter information elements MUST be semantically
defined by a directionDomain information element. The
Boschi, Trammell Expires April 2006 [Page 5]
Biflow implementation support in IPFIX
directionDomain IE can appear in the biflow record itself, or be
scoped to the sourceId or templateId associated with the biflow
record.
Note that no reverse post-multicast counters are defined,
because multicast flows are inherently unidirectional.
3.4.1 New Information Elements for Single Record biflows
The following information elements are required to support
single record biflows:
3.4.1.1 reverseOctetDeltaCount
Description:
The number of octets since the previous report (if any) in
packets sent by the biflow destination for this biflow.
The number of octets includes IP header(s)and IP payload.
Abstract Data Type: unsigned64
Data Type Semantics: deltaCounter
ElementId: 216
Status: proposed
Units: octets
3.4.1.2 reversePostOctetDeltaCount
Description:
The definition of this Information Element is identical to
the definition of Information Element
'reverseOctetDeltaCount',
except that it reports a potentially modified value caused
by a middlebox function after the packet passed the
observation
point.
Abstract Data Type: unsigned64
Data Type Semantics: deltaCounter
ElementId: 217
Status: proposed
Units: octets
3.4.1.3 reverseOctetDeltaSumOfSquares
Description:
The sum of the squared numbers of octets since the
previous report (if any) in packets sent by the biflow
destination for this biflow. The number of octets include
IP header(s) and IP payload.
Abstract Data Type: unsigned64
ElementId: 218
Status: proposed
Units: octets
3.4.1.4 reverseOctetTotalCount
Description:
The total number of octets in packets sent by the biflow
destination since the Metering Process (re-)initialization
for this Observation Point. The number of octets includes
IP header(s) and IP payload.
Abstract Data Type: unsigned64
Data Type Semantics: totalCounter
ElementId: 219
Status: proposed
Boschi, Trammell Expires April 2006 [Page 6]
Biflow implementation support in IPFIX
Units: octets
3.4.1.5 reversePostOctetTotalCount
Description:
The definition of this Information Element is identical to
the definition of Information Element
'reverseOctetTotalCount', except that it reports a
potentially modified value caused by a middlebox function
after the packet passed the observation point.
Abstract Data Type: unsigned64
Data Type Semantics: totalCounter
ElementId: 220
Status: proposed
Units: octets
3.4.1.6 reverseOctetTotalSumOfSquares
Description:
The total sum of the squared numbers of octets in packets
sent by the biflow destination for this biflow since the
Metering Process (re-)initialization for this Observation
Point. The number of octets include IP header(s) and IP
payload.
Abstract Data Type: unsigned64
ElementId: 221
Status: proposed
Units: octets
3.4.1.7 reversePacketDeltaCount
Description:
The number of packets since the previous report (if any)
for this biflow sent by the biflow destination.
Abstract Data Type: unsigned64
Data Type Semantics: deltaCounter
ElementId: 222
Status: proposed
Units: packets
3.4.1.8 reversePostPacketDeltaCount
Description:
The definition of this Information Element is identical to
the definition of Information Element
'reversePacketDeltaCount', except that it reports a
potentially modified value caused by a middlebox function
after the packet passed the observation point.
Abstract Data Type: unsigned64
Data Type Semantics: deltaCounter
ElementId: 223
Status: proposed
Units: packets
3.4.1.9 reversePacketTotalCount
Description:
The total number of packets sent by the biflow destination
for this biflow at the since the Metering Process (re-)
initialization for this Observation Point.
Abstract Data Type: unsigned64
Data Type Semantics: totalCounter
ElementId: 224
Status: proposed
Units: packets
Boschi, Trammell Expires April 2006 [Page 7]
Biflow implementation support in IPFIX
3.4.1.10 reversePostPacketTotalCount
Description:
The definition of this Information Element is identical to
the definition of Information Element
'reversePacketTotalCount', except that it reports a
potentially modified value caused by a middlebox function
after the packet passed the observation point.
Abstract Data Type: unsigned64
Data Type Semantics: totalCounter
ElementId: 225
Status: proposed
Units: packets
3.4.1.11 reverseDroppedOctetDeltaCount
Description:
The number of octets since the previous report (if any) in
packets sent by the biflow destination for this biflow
dropped by packet treatment. The number of octets include
IP header(s) and IP payload.
Abstract Data Type: unsigned64
Data Type Semantics: deltaCounter
ElementId: 226
Status: proposed
Units: octets
3.4.1.12 reverseDroppedPacketDeltaCount
Description:
The number of packets since the previous report (if any)
sent by
the biflow destination for this biflow dropped by packet
treatment.
Abstract Data Type: unsigned64
Data Type Semantics: deltaCounter
ElementId: 227
Status: proposed
Units: packets
3.4.1.13 reverseDroppedOctetTotalCount
Description:
The total number of octets in packets sent by the biflow
destination for this biflow dropped by packet treatment
since the Metering Process (re-)initialization for this
Observation Point. The number of octets include IP
header(s) and IP payload.
Abstract Data Type: unsigned64
Data Type Semantics: totalCounter
ElementId: 228
Status: proposed
Units: octets
3.4.1.14 reverseDroppedPacketTotalCount
Description:
The total number of packets sent by the biflow destination
for this biflow dropped by packet treatment since the
Metering Process (re-)initialization for this Observation
Point.
Abstract Data Type: unsigned64
Data Type Semantics: totalCounter
ElementId: 229
Status: proposed
Units: packets
Boschi, Trammell Expires April 2006 [Page 8]
Biflow implementation support in IPFIX
3.4.1.15 directionDomain
Description:
Defines the semantics of source and destination information
elements, and of reverse counters. This information element
is intended to be bound to a sourceID or a templateID in an
options data record. Defined values include:
0x00: Uniflow. Source and destination are defined as in the
packet headers from which the flows were generated. Reverse
counters have no defined meaning. This directionDomain is
not appropriate for exporting biflows in single data
records. This is the present default IPFIX behavior.
0x01: First Packet Biflow. The source of the biflow is
defined as the source of the first packet seen within the
flow by the Metering Process, and the destination of the
biflow is defined as the destination of that first packet.
Counters count packets sent by the first packet source, and
reverse counters count packets sent by the first packet
destination.
0x02: Initiator Biflow. The source of the biflow is defined
as the source of the packet initiating the connection as
determined by the Metering Process, and the destination of
the biflow is defined as the destination of the packet
initiating the connection. This is similar to First Packet
Biflow, except it gives the Metering Process some latitude
to attempt to determine the connection initiator when the
initiator is not necessarily the sender of the first packet
seen by the Metering Process.
0x03: Listener Biflow. The destination of the biflow is
defined as the source of the packet initiating the
connection as determined by the Metering Process or the
Exporting Process, and the source of the biflow is defined
as the destination of the packed initiating the connection.
This is similar to Initiator Biflow, except the source and
destination are reversed. This is primarily useful for the
case when the directionDomain information element is
present in each flow data record, and an intermediate
process handling multiple Metering Processes determines an
Initiator biflow should be reversed.
0x03 - 0x7F: Reserved for future assignment
0x80 - 0xFF: Reserved for private or experimental use.
Abstract Data Type: octet
Data Type Semantics: identifier
ElementId: 215
Status: proposed
Boschi, Trammell Expires April 2006 [Page 9]
Biflow implementation support in IPFIX
3.4.2 Example
Each single biflow data record can be described by a template
following the pattern below.
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Set ID = 2 | Length = 8 + 4k + 4m + 4n |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Template ID >= 256 | Field Count = k + m + n |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| Flow Key IE 1 | Field Length (Key 1) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. . .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| Flow Key IE n | Field Length (Key n) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| Flow Value IE 1 | Field Length (Value 1) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. . .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| Flow Value IE m | Field Length (Value m) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| Reverse Value IE 1 (216-229)| Field Length (Reverse 1) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
. . .
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|0| Reverse Value IE k | Field Length (Reverse k) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The options template below describes an options record that MUST
be present to semantically define the reverse counter
information. The directionDomain could also be associated with a
sourceID, or for the cost of one octet per record, appear in the
biflow record itself.
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Set ID = 3 | Length = 18 (+2) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Template ID >= 256 | Field Count = 2 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Scope Field Count = 1 |0| templateId = 148 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Scope Field Length = 2 |0| directionDomain = 215 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Field Length = 1 | Padding (optional) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
4. IANA Considerations
This documents defines a set of new IPFIX Information Elements
that extend those already defined in [IPFIX-INFO].
As specified in [IPFIX-INFO] IANA needs to create a new registry
for IPFIX Information Element identifiers. New assignments for
IPFIX Information Elements will be administered by IANA, on a
First Come First Served basis [RFC2434], subject to Expert
Review [RFC2434], i.e. review by one of a group of expert
designated by an IETF Operations and Management Area Director.
The group of experts must double check the Information Elements
definitions with already defined Information Elements for
completeness, accuracy, redundancy, and correct naming following
the naming conventions in [IPFIX-INFO]. Those experts will
initially be drawn from the Working Group Chairs and document
editors of the IPFIX and PSAMP Working Groups [IPFIX-INFO].
Boschi, Trammell Expires April 2006 [Page 10]
Biflow implementation support in IPFIX
5. Security Considerations
The same security considerations as for the IPFIX protocol
[IPFIX-PROTO] apply.
6. References
6.1 Normative References
[IPFIX-PROTO] B. Claise et Al.: IPFIX Protocol Specification,
Internet-draft work in progress
<draft-ietf-ipfix-protocol-19.txt>, September 2005
[IPFIX-INFO] J. Quittek, S.Bryant, B.Claise, J. Meyer:
Information Model for IP Flow Information Export
Internet-draft work in progress <draft-ietf-ipfix-
info-11.txt>, September 2005
6.2 Informative References
[RFC2434] Narten, T. and H. Alvestrand: Guidelines for
Writing an IANA Considerations Section in RFCs,
BCP 26, RFC 2434, October 1998.
7. Acknowledgements
We would like to thank Lutz Mark for his contribution and
comments.
8. Author's Addresses
Elisa Boschi
Hitachi Europe SAS
Immeuble Le Theleme
1503 Route des Dolines
06560 Valbonne, France
Phone: +33 4 89874180
Email: elisa.boschi@hitachi-eu.com
Brian H. Trammell
CERT Network Situational Awareness
Software Engineering Institute
4500 Fifth Avenue
Pittsburgh, PA 15213
US
Phone: +1 412 268 9748
Email: bht@cert.org
Boschi, Trammell Expires April 2006 [Page 11]
Biflow implementation support in IPFIX
9. Intellectual Property Statement
The IETF takes no position regarding the validity or scope of
any Intellectual Property Rights or other rights that might be
claimed to pertain to the implementation or use of the
technology described in this document or the extent to which any
license under such rights might or might not be available; nor
does it represent that it has made any independent effort to
identify any such rights. Information on the procedures with
respect to rights in RFC documents can be found in BCP 78 and
BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the
use of such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR
repository at http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention
any copyrights, patents or patent applications, or other
proprietary rights that may cover technology that may be
required to implement this standard. Please address the
information to the IETF at ietf-ipr@ietf.org.
10. Copyright Statement
Copyright (C) The Internet Society (2005). This document is
subject to the rights, licenses and restrictions contained in
BCP 78, and except as set forth therein, the authors retain all
their rights.
11. Disclaimer
This document and the information contained herein are provided
on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE
REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY
THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY
RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
Boschi, Trammell Expires April 2006 [Page 12]
| PAFTECH AB 2003-2026 | 2026-04-24 01:13:46 |