http://stupid.domain.name/ietf/

One document matched: draft-boschi-export-perpktinfo-00.txt

Use of IPFIX for Export of Per-Packet Information

Internet-Draft E. Boschi
Document: draft-boschi-export-perpktinfo-00.txt Fraunhofer FOKUS
/ Hitachi Europe
Expires: December 2005 L. Mark
Fraunhofer FOKUS

June 2005

Use of IPFIX for Export of Per-Packet Information
draft-boschi-export-perpktinfo-00.txt

Status of this Memo

By submitting this Internet-Draft, each author represents that
any applicable patent or other IPR claims of which he or she is
aware have been or will be disclosed, and any of which he or she
becomes aware will be disclosed, in accordance with Section 6 of
BCP 79.

Internet-Drafts are working documents of the Internet
Engineering Task Force (IETF), its areas, and its working
groups. Note that other groups may also distribute working
documents as Internet-Drafts.

Internet-Drafts are draft documents valid for a maximum of six
months and may be updated, replaced, or obsoleted by other
documents at any time. It is inappropriate to use
Internet-Drafts as reference material or to cite them other than
as "work in progress."

The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.

The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.

This Internet-Draft will expire on December 26, 2005.

Boschi, Mark Expires December 2005 [Page 1]
Use of IPFIX for Export of Per-Packet Information

Abstract

This document describes the usage of the IP Flow Information
Export (IPFIX) protocol for the case of exporting and processing
per-packet information.
The main idea is to separate the export of the information about
packets and flows those packets belong to, using two different
records. The association between the records is kept using
unique Flow or Template Identifiers.

Table of Contents

1. Introduction¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸2
2. Terminology¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸2
3. General Problem Statement¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸3
4. Export Per-Packet Information¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸3
5. Using Scopes¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸5
6. Flow ID Management¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸5
7. Example of Per-Packet Information Export¸¸¸¸¸¸¸¸¸¸¸¸¸6
8. IPFIX for per-packet information export and PSAMP¸¸¸¸7
9. Export and evaluation considerations¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸7
10. IANA Consideration¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸7
11. Security Considerations¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸7
12. References¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸8
12.1 Normative References¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸8
12.2 Informative References¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸8
13. Author's Addresses¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸8
14. Intellectual Property Statement¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸8
15. Copyright Statement¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸9
16. Disclaimer¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸9

1. Introduction

In the scope of passive QoS Measurements, there is often the
need to exchange and export measurement data in a finer
granularity then per flows. One typical application is passive
One-Way-Delay measurement; this draft takes it as example when
demonstrating the need for information export on a per-packet
basis.

The IPFIX protocol however, has been designed to export flow
records. A possible approach to export packet records using
IPFIX could be exporting flow records containing information
about single packets. This method has been proposed by the PSAMP
working group in [Cla04]. Exporting flow related information
per-packet introduces a high degree of redundancy. This draft
shows how packet information and flow information can be
efficiently exported and related using IPFIX.

2. Terminology

Collecting Process
The collecting process receives records of flow or packet
information. The data is stored for later processing (by
the calculation process)

Exporting Process
The exporting processes send flow and packet records to the
collecting processes. The records are generated by the
measurement process.

Filtering
Filtering selects a subset of packets by applying
deterministic functions on parts of the packet content like

Boschi, Mark Expires December 2005 [Page 2]
Use of IPFIX for Export of Per-Packet Information

header fields or parts of the payload. A filtering process
needs to process the packet (look at packet header and/or
payload) in order to make the selection decision.

Measurement Device
A measurement device has access to at least one observation
point. It is hosting at least one measurement process and
one export process.

Metering/Measurement Process
The measurement process generates records of packet and
flow information. Packets passing the observation point are
captured, time stamped, filtered and classified. The
measurement process calculates the packet Ids.

Passive One-Way-Delay Measurement
Abbreviated: POWD Measurement

3. General Problem Statement

In [Cla05] the IPFIX working group has defined a protocol to
transport measurement data containing flow information.

The main purpose of the protocol is to exchange information
about IP traffic flows. In this scope a flow is defined by a set
of key attributes (source/destination address,
source/destination port, Layer3 Protocol Type, TOS/DSCP byte,
interface of the flow exporting network element). As such, a
flow is a collection of packets that share a set of common
attributes.

However, for a number of metrics there is a need to export
per-packet data.

A single packet could be considered a special case of a flow and
thus, per-packet information could be exported using flow
records. Doing this though would have consequences on the
efficiency of the exporting procedure, as it would mean
additional overhead. Packets belonging to the same flow share
common attributes, i.e. source address, destination address,
etc. Exporting these attributes on a per-packet basis, each time
with a different packet ID, would be redundant information.

There are cases however, where it is desirable to keep flow
information along with the per-packet information, that is, when
analyzing packet characteristics while observing flows. This
document proposes a solution that reduces the overhead caused by
the flow properties while keeping a link to flow information.

The proposed method does not need any changes to the IPFIX
protocol.

4. Export Per-Packet Information

Figure 1 depicts three packets belonging to flow A and one
packet belonging to flow B, respectively. It shows export
records containing packet information plus flow information
(source and destination address). Undoubtedly, the flow
information introduces a huge amount of redundancy, as it is
repeated for every packet in every record. Minimizing the
redundancy is a common problem in relational data base design
and we apply here similar solutions to those proposed in that
area.

Boschi, Mark Expires December 2005 [Page 3]
Use of IPFIX for Export of Per-Packet Information

In Figure 2 we separate flow from packet information. In order
to maintain the relation between Packet Properties and Flow
Properties we introduce indices (idxA and idxB) for the Flow
Properties that are unique for all Flow Property entries. The
purpose of the indices is to serve as "primary key" that
identifies rows of the Flow Properties. More details about these
indices will be given in section 5. The rows are then referenced
by the Packet Properties by using the appropriate value for the
flow identifier. The linkage of one packet and flow B (srcB,
dstB, idxB) is explicitly drawn.

Figure 1: Flow and packet information represented in one-packet
flows

Figure 2: Flow information and packet information

The IPFIX protocol is template based like NetFlow version 9. For
a complete description of features of IPFIX refer to [Cla05].
Templates define the structure of data to be exported,
describing data fields together with their type and meaning.
IPFIX specifies two types of records to export data: data
records and option data records. These records are defined via
template records and option template records. To export per-
packet-information we define two different templates: an option
template for Flow Properties and a template for Packet
Properties.

Figure 3 shows the relation between template and data sets for
packet and flow properties. The Flow Properties option template
defines the attributes for a flow; e.g. IP source and
destination address and the flowID. The flowID is a unique
identifier for a flow; this field allows packet records to
reference flow attributes. Subsequent option data records of
this template define the actual flows. The reference could be
alternatively provided by the TemplateID, as explained in
Section 5.

The format for the information related to single packets is
defined in the Packet Properties template. This information is
packet specific and normally not shared between many packets.

Boschi, Mark Expires December 2005 [Page 4]
Use of IPFIX for Export of Per-Packet Information

Otherwise one would rather consider the information as flow
related and therefore it needs not be exported in every record.

Figure 3: Template FlowSet and Data FlowSet dependencies

The Flow Properties option data records SHOULD be sent prior to
the corresponding Packet Properties data records.

5. Using Scopes

Flow Properties are sent via IPFIX option records. IPFIX option
records contain one or more scope fields. The Flow Properties
record can contain the FlowID and/or the TemplateID as scope
fields. There are three options:

1) Use FlowID as scope
The flow properties are valid for all data records containing
that flowID. This solution limits the number of different
flows that can be exported at the same tame in the same
observation domain to 2**32 (using 32 bits flowIDs)
2) Use FlowID and TemplateID as scope
The flow properties are valid only for data records referring
to the template specified by the TemplateIDand containing
that flowID. This allows the export up to 2**32 flows per
template. The solution is to be chosen when the number of
flows to be exported is expected to be very high (and beyond
the limit posed by solution 1)
3) Use TemplateID as scope
The flow properties are valid for all data records of the
specified template. In this case flowIDs are not needed but
the exporting process requires a templateID per flow. In the
general case this solution is not scalable but can be
suitable for certain applications (e.g. flow aggregation).

6. Flow properties Management

Like template IDs the flow IDs have to be unique per observation
domain (source identifier in the IPFIX header). There are no
constraints regarding the order of the Flow ID allocation. When
limiting the scope to special templates, the flow IDs have to be
unique per observation domain and template.

The considerations made in [IPFIX-PROTO] with regard to template
management apply for flow properties as well (e.g. the regular
retransmission when using an unreliable transport protocol).

Boschi, Mark Expires December 2005 [Page 5]
Use of IPFIX for Export of Per-Packet Information

7. Example of Per-Packet Information Export

To demonstrate how to use IPFIX efficiently to export per-packet
information, this section proposes how to use the IPFIX protocol
for exporting flow information and per-packet information (in
this case related to a long-lived flow) for OWD computation.

In order to acquire a One-Way path delay information, two
measurement points with synchronized clocks must exist, one at
each end of the path under examination. Both measurement points
will capture packets, assign them timestamps and generate an
identifier for a packet passing that point. Each measurement
point will export its measurement data to a collecting process
where the data are correlated based on the packet identifiers
and timestamps and then the delay is calculated as a difference
of two timestamps of a packet pair.

The templates that would be needed for exporting measurement
data of this kind are illustrated in Figure 4.
The upper part of the figure shows the option template
containing the information concerning flows using the FlowID as
scope. The lower part displays the template with the packet
properties.

For passive One-Way-Delay measurement, the Packet Properties
template consists of at least Timestamp and Packet ID.
Additionally, this template contains a flow identifier field. In
packet records, the value of this field will contain one of the
unique indices of the flow records exported before.

..+-------------------+
| flowID |
| |
| unsigned32/vendor |
..+-------------------+

Figure 4: Example Templates for Flow and Packet Properties

Boschi, Mark Expires December 2005 [Page 6]
Use of IPFIX for Export of Per-Packet Information

The delay is derived by a calculation step: At the collection
point packet records of two measurement points are gathered and
correlated by means of the packet ID. The resulting delay data
records are exported in a similar manner as the packet data have
been. Especially, the linkage between delay data and flow
information is represented with the discussed flow identifier
fields. The OWD properties contain the Packet Pair ID (which is
the packet ID matching that of the two contributing packet
records), a timestamp (which is the timestamp of the packet
passing the reference monitor point) in order to reconstruct a
time series, the calculated delay value, and finally a flow
identifier.

8. IPFIX for per-packet information export and PSAMP

In [Cla04] the PSAMP working group proposes to use IPFIX to
export packet information from a PSAMP Exporting Process to a
PSAMP Collecting Process. Even though no new version of the
draft has been produced so far the solution seems to be accepted
from the group.
While IPFIX is well suited for the purpose due to the good match
between the IPFIX and PSAMP architectures and to the fact that
IPFIX satisfies PSAMP requirements, the described approach has a
high degree of redundancy. It proposes to treat packets as flows
and export per-packet information using flow records.
We propose to use the solution described in this draft to
efficiently export PSAMP packet information.

9. Export and evaluation considerations

The main advantage of this proposed method to export per-packet
information is the reduced amount of measurement data that has
to be transferred from the exporter to the collector. In
addition there is less storage capacity needed at the collector
side.

On the other hand there is some extra processing power needed on
the exporter side to manage flow information and to assign
packets to flows. The collector has to process records of two
templates instead of just one but has to read and write less
data. Additional effort is needed when post processing the
measurement data, because now the correlation of flow and packet
information is needed.

In the above example (see Figure 4) using IPFIX to export the
measurement data for each received packet 28 bytes have to be
transferred (sourceAddressV4=4, destinationAddressV4=4,
classOfServiceV4=1, protocolIdentifier=1, transportSourcePort=2,
transportDestionationPort=2, packetTimestamp=8, packetID=4,
packetLength=2). Disregarding the IPFIX protocol overhead a flow
of 1000 packets produces 28000 bytes of measurement data. Using
the proposed optimization each packet produces an export of only
16 bytes (packetTimestamp=8, packetID=4, packetLength=2,
flowID=2). The export of the flow information produces 16 bytes
(sourceAddressV4=4, destinationAddressV4=4, classOfServiceV4=1,
protocolIdentifier=1, transportSourcePort=2,
transportDestionationPort=2, flowID =2). For a flow of 1000
packet this sums up to 16016 bytes. This is a decrease of more
than 40 percent.

10. IANA Consideration

This document does not imply any IANA action.

11. Security Considerations

Boschi, Mark Expires December 2005 [Page 7]
Use of IPFIX for Export of Per-Packet Information

For the proposed use of the IPFIX protocol for export of
per-packet information the security considerations as for the
IPFIX protocol apply.

12. References

12.1 Normative References

[Cla05] Benoit Claise: IPFIX Protocol Specification,
IETF draft work in progress
<draft-ietf-ipfix-protocol-16.txt>, June 2005

[Cla04] Benoit Claise: PSAMP Protocol Specification,
Internet Draft <draft-ietf-psamp-protocol-01.txt>,
February 2004

12.2 Informative References

[DuGG03] Nick Duffield, et Al.: A Framework for Packet
Selection and reporting, Internet Draft
<draft-ietf-psamp-framework-10.txt>, January 2005

[DuGr00] Nick Duffield, Matthias Grossglauser: Trajectory
Sampling for Direct Traffic Observation,
Proceedings of ACM SIGCOMM 2000, Stockholm, Sweden,
August 28 - September 1, 2000

[QuZC04] J. Quittek, et Al.: Requirements for IP Flow
Information Export, RFC 3917, October 2004

[GrDM98] Ian D. GRAHAM, Stephen F. DONNELLY, Stele MARTIN,
Jed MARTENS, John G. CLEARY: Nonintrusive and
Accurate Measurement of Unidirectional Delay and
Delay Variation on the Internet, INET'98, Geneva,
Switzerland, July 21-24, 1998

[TPBC03] T. Zseby, E. Boschi, R. Penno, N. Brownlee, B.
Claise: IPFIX Applicability, Internet Draft
<draft-ietf-ipfix-as-05.txt>, May 2005

13. Author's Addresses

Elisa Boschi
Fraunhofer Institute for Open Communication Systems
Kaiserin-Augusta-Allee 31
10589 Berlin
Germany
Phone: +49-30-34 63 7366
Fax: +49-30-34 53 8366
Email: boschi@fokus.fraunhofer.de

Lutz Mark
Fraunhofer Institute for Open Communication Systems
Kaiserin-Augusta-Allee 31
10589 Berlin
Germany
Phone: +49-30-34 63 7306
Fax: +49-30-34 53 8306
Email: mark@fokus.fraunhofer.de

14. Intellectual Property Statement

The IETF takes no position regarding the validity or scope of
any Intellectual Property Rights or other rights that might be
claimed to pertain to the implementation or use of the

Boschi, Mark Expires December 2005 [Page 8]
Use of IPFIX for Export of Per-Packet Information

technology described in this document or the extent to which any
license under such rights might or might not be available; nor
does it represent that it has made any independent effort to
identify any such rights. Information on the procedures with
respect to rights in RFC documents can be found in BCP 78 and
BCP 79.

Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the
use of such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR
repository at http://www.ietf.org/ipr.

The IETF invites any interested party to bring to its attention
any copyrights, patents or patent applications, or other
proprietary rights that may cover technology that may be
required to implement this standard. Please address the
information to the IETF at ietf-ipr@ietf.org.

15. Copyright Statement

Copyright (C) The Internet Society (2005). This document is
subject to the rights, licenses and restrictions contained in
BCP 78, and except as set forth therein, the authors retain all
their rights.

16. Disclaimer

This document and the information contained herein are provided
on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE
REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY
THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY
RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.

Boschi, Mark Expires December 2005 [Page 9]

PAFTECH AB 2003-2026

2026-04-23 10:25:57