One document matched: draft-bernstein-qsbmf-00.txt

The qmail-send Bounce Message Format (QSBMF)

INTERNET-DRAFT   draft-bernstein-qsbmf-00.txt   (expires 1 October 1996)

   This document is an Internet-Draft. Internet-Drafts are working
   documents of the Internet Engineering Task Force (IETF), its areas,
   and its working groups. Note that other groups may also distribute
   working documents as Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six
   months and may be updated, replaced, or obsoleted by other documents
   at any time. It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as ``work in progress.''

   To learn the current status of any Internet-Draft, please check the
   ``1id-abstracts.txt'' listing contained in the Internet-Drafts
   Shadow Directories on ftp.is.co.za (Africa), nic.nordu.net (Europe),
   munnari.oz.au (Pacific Rim), ds.internic.net (US East Coast), or
   ftp.isi.edu (US West Coast).

Status of this memo

   This memo provides information for the Internet community. This memo
   does not specify an Internet standard of any kind. Distribution of
   this memo is unlimited.

Abstract

   When a message transport agent (MTA) finds itself permanently unable
   to deliver a mail message, it generates a new message, generally
   known as a bounce message, back to the envelope sender.

   Bounce messages produced by the qmail-send program display the list
   of failed recipient addresses, an explanation for each address, and a
   copy of the original message, in a format that is easy for both
   humans and programs to read. This document defines the format.


Network Working Group                                       D. Bernstein
XXXXXXXXXXXXXXXXXXXX: NNNN                                            IR
Category: Informational                                     3 April 1996


		The qmail-send Bounce Message Format (QSBMF)


Status of this memo

   This memo provides information for the Internet community. This memo
   does not specify an Internet standard of any kind. Distribution of
   this memo is unlimited.


1. Introduction

   When a message transport agent (MTA) finds itself permanently unable
   to deliver a mail message, it generates a new message, generally
   known as a bounce message, back to the envelope sender.

   Bounce messages produced by the qmail-send program display the list
   of failed recipient addresses, an explanation for each address, and a
   copy of the original message, in a format that is easy for both
   humans and programs to read. For example:

      Date: 17 Mar 1996 03:54:40 GMT
      From: MAILER-DAEMON@silverton.berkeley.edu
      To: djb@silverton.berkeley.edu
      
      Hi. This is the qmail-send program at silverton.berkeley.edu.
      I'm afraid I wasn't able to deliver your message to the
      following addresses. This is a permanent error; I've given up.
      Sorry it didn't work out.
      
      <god@heaven.af.mil>:
      Sorry, I couldn't find any host by that name.
      
      --- Below this line is a copy of the message.
      
      Return-Path: <djb@silverton.berkeley.edu>
      Received: (qmail-queue invoked by uid 7); 17 Mar 1996 03:54:38 GMT
      Date: 17 Mar 1996 03:54:38 GMT
      Message-ID: <19960317035438.26563.qmail@silverton.berkeley.edu>
      From: djb@silverton.berkeley.edu (D. J. Bernstein)
      To: god@heaven.af.mil
      Subject: are you there?
      
      Just checking.

   This document defines qmail-send's format for bounce messages.





Bernstein                                                       [Page 1]

XXX NNNN         The qmail-send Bounce Message Format         April 1996


   In this document, a string of 8-bit bytes may be written in two
   different forms: as a series of hexadecimal numbers between angle
   brackets, or as a sequence of ASCII characters between double quotes.
   For example, <68 65 6c 6c 6f 20 77 6f 72 6c 64 21> is a string of
   length 12; it is the same as the string "hello world!".


2. Format

   A bounce message may be recognized as QSBMF as follows: its body
   begins with the characters "Hi. This is the" exactly as shown.

   The body of the message has four pieces: an introductory paragraph,
   zero or more recipient paragraphs, a break paragraph, and the
   original message.

   Each paragraph is a series of non-blank lines followed by a single
   blank line. The break paragraph begins with the character "-". All
   other paragraphs begin with characters other than "-". The break
   paragraph is human-readable but provides no interesting information.

   The introductory paragraph is human-readable. It gives the name and
   human-comprehensible location of the MTA, but parsers should not
   attempt to use this information.

   The only type of recipient paragraph described here is a failure
   paragraph, which begins with the character "<". Paragraphs beginning
   with other characters are reserved for future extensions.

   The first line of a failure paragraph ends with the characters ">:".
   Everything between the leading "<" and the trailing ">:" is an
   (unquoted) Internet mail address.

   A failure paragraph asserts that the MTA was permanently unable to
   deliver the message to the mail address shown on the first line; the
   MTA will not attempt further deliveries to that address. The
   remaining lines of the paragraph give a human-readable description of
   the reason for failure. Descriptions beginning with <20>, and
   descriptions containing "#", are reserved for future extensions.

   The envelope sender might not have sent his message to the address
   shown. There are two reasons for this. First, the MTA may freely
   replace unprintable characters with "_". Second, the original 
   recipient address may have been an alias for the address shown.

   The original message is an exact copy of the message received by the
   MTA, including both header and body, preceded by a Return-Path field
   showing the envelope sender.





Bernstein                                                       [Page 2]

XXX NNNN         The qmail-send Bounce Message Format         April 1996


3. Comparison with 1892/1894

   RFC 1892 and RFC 1894 together describe a format for delivery status
   notifications. I have decided not to use that format, because I
   believe that its complexity will prevent wide implementation and
   increase the burden on people who manage mailing lists.

   QSBMF is dedicated to failure reports, whereas RFC 1894 allows
   success reports and deferral reports. Although it would be possible
   to add deferral paragraphs and success paragraphs to QSBMF, it would
   be even easier to design separate formats for such notices. I have
   trouble reading mixed failure/deferral reports.

   QSBMF always returns the entire original message. RFC 1892 allows
   the MTA to return nothing or to return just the headers; it states
   ``Return of content may be wasteful of network bandwidth.'' However,
   failure notices are very rare, so the overall loss of bandwidth in
   this case is insignificant. A much more important issue is storage
   space: someone who manages a big mailing list does not want to have
   to store several copies of each message in the form of bounces. The
   best solution is to have each bounce automatically fed through a
   program that stores only the critical information. I expect such
   programs to spring up quickly for QSBMF.

   RFC 1894 provides language-independent error messages, as described
   by RFC 1893. One can achieve the same results more easily by adding
   structure to the human-readable failure descriptions.

   RFC 1894 is able to communicate an ``envelope ID'' and the original
   envelope recipient address specified by the sender. Unfortunately,
   this information will almost never be available, since it requires
   support by every intermediate MTA. I see no value in an envelope ID,
   since it is uniquely determined by the envelope sender, envelope
   recipient, and Message-ID, unless a message is looping. As for the
   original envelope recipient address: if it is not an alias, it is the
   same as the final address; if it is an alias, it can be recorded in a
   Delivered-To line. This requires support by only one MTA.

   RFC 1894 includes several pieces of information that can instead be
   obtained from Received lines: the name of the MTA where delivery
   failed, the name of the previous MTA, timestamps, etc.

   All of these RFC 1894 features have a cost: complexity. A program
   cannot parse an 1894 report without parsing RFC 822 header fields
   and understanding quite a bit of MIME. This will limit the
   availability of parsing software. In the meantime, such reports are
   annoying to mailing list maintainers, since they are full of
   uninteresting information and are difficult to parse visually.






Bernstein                                                       [Page 3]
 (expires 1 October 1996)
XXX NNNN         The qmail-send Bounce Message Format         April 1996


4. Security considerations

   Bounce messages may be forged. Never remove someone from a mailing
   list without sending him a message stating that you are doing so,
   even if the reason for removal is a series of apparent bounce
   messages from his address.

   If you send a message along a secret path, you should change the
   envelope sender address of the message to yourself, so that a bounce
   will not reveal anything to the original sender. In other words: for
   secret forwarding, use a mailing list, not an alias.

   See RFC 1894 for further discussion of these points.


Author's address

   D. J. Bernstein

   Email:  djb@pobox.com


































Bernstein                                                       [Page 4]