One document matched: draft-shaikh-idr-bgp-model-01.txt
Differences from draft-shaikh-idr-bgp-model-00.txt
Interdomain Routing A. Shaikh
Internet-Draft Google
Intended status: Informational K. D'Souza
Expires: September 10, 2015 AT&T
D. Bansal
Microsoft
R. Shakir
BT
March 9, 2015
BGP Model for Service Provider Networks
draft-shaikh-idr-bgp-model-01
Abstract
This document defines a YANG data model for configuring and managing
BGP, including protocol, policy, and operational aspects based on
carrier and content provider operational requirements.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on September 10, 2015.
Copyright Notice
Copyright (c) 2015 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
Shaikh, et al. Expires September 10, 2015 [Page 1]
Internet-Draft BGP Model March 2015
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
1. Introduction
This document describes a YANG [RFC6020] data model for BGP [RFC4271]
protocol and policy configuration, as well as defining key
operational state data. The model is intended to be vendor-neutral,
in order to allow operators to manage BGP configuration in
heterogeneous environments with routers supplied by multiple vendors.
The model is also intended to be readily mapped to existing
implementations, however, to facilitate support from as large a set
of routing hardware and software vendors as possible.
1.1. Goals and approach
This model does not (in the current iteration) aim to be feature
complete (i.e., cover all possible features of a BGP implementation).
Rather its development is driven by examination of BGP configurations
in use across a number of operator network deployments.
The focus area of the first version of the model is on base BGP
protocol configuration and policy configuration with "hooks" to add
support for additional address families, as well as operational data
to enable a common model for reading BGP-related state from devices.
The focus of the the BGP model described in this document is on
providing the base configuration and operational state information
relating to:
o The global BGP instance, and neighbors whose configuration is
specified individually, or templated with the use of peer-groups.
o The address families that are supported by peers, and the global
configuration which relates to them.
o The policies that relate to a neighbor - controlling the import
and export of NLRI.
Configuration items that are deemed to be widely available in
existing major BGP implementations are included in the model. Those
configuration items that are only available from a single
implementation are omitted from the model with the expectation they
will be available in companion modules that augment the current
model. This allows clarity in identifying data that is part of the
vendor-neutral model.
Shaikh, et al. Expires September 10, 2015 [Page 2]
Internet-Draft BGP Model March 2015
Where possible, naming in the model follows conventions used in
available standards documents, and otherwise tries to be self-
explanatory with sufficient descriptions of the intended behavior.
Similarly, configuration data value constraints and default values,
where used, are based on recommendations in current standards
documentation. Since implementations vary widely in this respect,
this version of the model specifies only a limited set of defaults
and ranges with the expectation of being more prescriptive in future
versions based on actual operator use.
2. Model overview
The BGP model is defined across several YANG modules but at a high
level is organized into four elements:
o base protocol configuration -- configuration affecting BGP
protocol-related operations, defined at various levels of
hierarchy.
o multiprotocol configuration -- configuration affecting individual
address-families within BGP [RFC4760].
o policy configuration -- configuration defining the policies that
act on routes sent (received) to (from) peers or other routing
protocols.
o operational state -- variables used for monitoring, management,
etc. of BGP operations.
These modules also make use of the standard Internet types, such as
IP addresses, autonomous system numbers, etc., defined in RFC 6991
[RFC6991].
Throughout the model, the approach described in
[I-D.openconfig-netmod-opstate] is used to represent configuration
(intended state), operational and derived state data. That is to
say, that each container holds a "config" and "state" sub-container -
with the config container being used for configurable parameters, and
the state container container holding representing both the
operational state of configurable leaves, and derived counters and
statistical information.
2.1. BGP protocol configuration
The BGP protocol configuration model is organized hierarchically,
much like the majority of router implementations. That is,
configuration items can be specified at multiple levels, as shown
below.
Shaikh, et al. Expires September 10, 2015 [Page 3]
Internet-Draft BGP Model March 2015
+--rw bgp!
+--rw global
| +-- (global-configuration-options)
+--rw neighbors
| +--rw neighbor* [neighbor-address]
| +-- (neighbor-configuration-options)
+--rw peer-groups
+--rw peer-group* [peer-group-name]
+-- (neighbor-configuration-options)
Users may specify configuration at a higher level and have it apply
to all lower-level items, or provide overriding configuration at a
lower level of the hierarchy. Overriding configuration items are
optional with per-neighbor configuration being the most specific or
lowest level, followed by peer-group, and finally global. Global
configuration options reflect a subset of the per-peer-group or per-
neighbor configuration options which are relevant to the entire BGP
instance.
The model makes the simplifying assumption that most of the
configuration items are available at all levels of the hierarchy.
That is, very little configuration is specific to a particular level
in the hierarchy, other than obvious items such as "group- name" only
being available for the peer group-level config. A notable exception
is for sub-address family configuration where some items are only
applicable for a given AFI-SAFI combination.
In order to allow common configuration to be applied to a set of
neighbors, all neighbor configuration options are available within a
peer-group. A neighbor is associated to a particular peer-group
through the use of a peer-group leaf (which provides a reference to a
configured item in the peer-group list).
Address-family configuration is made available in multiple points
within the model - primarily within the global container, where
instance-wide configuration can be set (for example, the BGP bestpath
route selection options, or global policies relating to the address-
family); and on a per-neighbor or per-peer-group basis, where
address-families can be enabled or disabled, and policy associated
with the parent entity applied. Within the afi-safi container,
generic configuration that applies to all address-families (e.g.,
whether the AFI-SAFI is enabled) is presented at the top-level, with
address-family specific containers made available for options
relating to only that AFI-SAFI. Within the current revision of the
model a generic set of address-families, and common configuration and
state options included - further work is expected to add additional
parameters to this area of the model.
Shaikh, et al. Expires September 10, 2015 [Page 4]
Internet-Draft BGP Model March 2015
The following address-families are currently supported by the model:
| +--rw afi-safi
| | +--rw afi-safi* [afi-safi-name]
| | +--rw afi-safi-name identityref
| | +--rw route-selection-options
| | +--rw use-multiple-paths!
| | +--rw apply-policy
| | +--rw ipv4-unicast!
| | +--rw ipv6-unicast!
| | +--rw ipv4-labelled-unicast!
| | +--rw ipv6-labelled-unicast!
| | +--rw l3vpn-ipv4-unicast!
| | +--rw l3vpn-ipv6-unicast!
| | +--rw l3vpn-ipv4-multicast!
| | +--rw l3vpn-ipv6-multicast!
| | +--rw l2vpn-vpls!
| | +--rw l2vpn-evpn!
2.2. Policy configuration overview
The BGP policy configuration model references the generic YANG
routing policy model described in [I-D.shaikh-rtgwg-policy-model].
This model represents a condition-action policy framework. This
model adds BGP-specific conditions (e.g., matching on the community
attribute), and actions (e.g., setting local preference) to the
generic policy framework.
Policies that are defined in the routing-policy model are then
referenced in multiple places within the model:
o Within the global instance, where a policy applies to all address-
families for all peers.
o On a global AFI-SAFI basis, where policies apply to all peers for
a particular address-family.
o On a per-peer-group or per-neighbor basis - where the policy
applies to all address-families for the particular parent entity.
o On a per-afi-safi basis within a neighbor or peer-group context,
where the policy is specific to the AFI-SAFI.
Shaikh, et al. Expires September 10, 2015 [Page 5]
Internet-Draft BGP Model March 2015
+--rw bgp
+--rw global
| +--rw afi-safi
| | +--rw afi-safi* [afi-safi-name]
| | +--rw apply-policy
| +--rw apply-policy
+--rw neighbors
| +--rw neighbor* [neighbor-address]
| +--rw afi-safi
| | +--rw afi-safi* [afi-safi-name]
| | +--rw apply-policy
| +--rw apply-policy
+--rw peer-groups
+--rw peer-group* [peer-group-name]
+--rw afi-safi
| +--rw afi-safi* [afi-safi-name]
| +--rw apply-policy
+--rw apply-policy
2.3. Operational data overview
The BGP operational model contains a set of parameters which relate
to the operational state of the various elements of the BGP router.
As noted in Section 2 - the approach described in
[I-D.openconfig-netmod-opstate] is utilised for the inclusion of
operational and statistical data. To this end, the "_state"
groupings (those that contain derived operational parameters) are
contained within the BGP operational model - and included within the
relevant "state" containers throughout the core BGP model. In some
cases, operational information may be relevant to one instance of a
common grouping, but not another - for example, the number of
received, advertised and installed prefixes is relevant on a per-
neighbor-basis, but is not required (or meaningful) when within the
peer-group context. To enable state to be added to particular
contexts, the tree is augmented through the base BGP module to add
these variables, without requiring separate groupings.
3. Security Considerations
BGP configuration has a significant impact on network operations, and
as such any related protocol or model carries potential security
risks.
YANG data models are generally designed to be used with the NETCONF
protocol over an SSH transport. This provides an authenticated and
secure channel over which to transfer BGP configuration and
operational data. Note that use of alternate transport or data
Shaikh, et al. Expires September 10, 2015 [Page 6]
Internet-Draft BGP Model March 2015
encoding (e.g., JSON over HTTPS) would require similar mechanisms for
authenticating and securing access to configuration data.
Most of the data elements in the configuration model could be
considered sensitive from a security standpoint. Unauthorized access
or invalid data could cause major disruption.
4. IANA Considerations
This YANG data model and the component modules currently use a
temporary ad-hoc namespace. If and when it is placed on redirected
for the standards track, an appropriate namespace URI will be
registered in the IETF XML Registry" [RFC3688]. The BGP YANG modules
will be registered in the "YANG Module Names" registry [RFC6020].
5. YANG modules
The modules comprising the BGP configuration and operational model
are described by the YANG modules in the sections below. The base
module imports the other modules to create the overall model.
5.1. BGP base items
<CODE BEGINS> file bgp.yang
module bgp {
yang-version "1";
// namespace
namespace "http://openconfig.net/yang/bgp";
prefix "bgp";
// import some basic inet types
import ietf-inet-types { prefix inet; }
import bgp-multiprotocol { prefix bgp-mp; }
import routing-policy { prefix rpol; }
import bgp-types { prefix bgp-types; }
import bgp-operational { prefix bgp-op; }
// meta
organization
"OpenConfig working group";
contact
"OpenConfig working group
netopenconfig@googlegroups.com";
Shaikh, et al. Expires September 10, 2015 [Page 7]
Internet-Draft BGP Model March 2015
description
"This module describes a YANG model for BGP protocol
configuration.It is a limited subset of all of the configuration
parameters available in the variety of vendor implementations,
hence it is expected that it would be augmented with vendor-
specific configuration data as needed. Additional modules or
submodules to handle other aspects of BGP configuration,
including policy, VRFs, VPNs, and additional address families
are also expected.
This model supports the following BGP configuration level
hierarchy:
BGP
|
+-> [ global BGP configuration ]
+-> peer group
+-> [ peer group config ]
+-> AFI / SAFI [ per-AFI overrides ]
+-> neighbor
+-> [ neighbor config ]
+-> [ optional pointer to peer-group ]
+-> AFI / SAFI [ per-AFI overrides ]";
revision "2014-03-05" {
description
"";
reference "TBD";
}
grouping bgp-global_config {
description
"Global configuration options for the BGP router.";
leaf as {
type inet:as-number;
mandatory "true";
description
"Local autonomous system number of the router. Uses
the 32-bit as-number type from the model in RFC 6991.";
}
leaf router-id {
type inet:ipv4-address;
description
"Router id of the router, expressed as an
32-bit value, IPv4 address.";
}
}
Shaikh, et al. Expires September 10, 2015 [Page 8]
Internet-Draft BGP Model March 2015
grouping bgp-default-route-distance_config {
description
"Configuration options relating to the administrative distance
(or preference) assigned to routes received from different
sources (external, internal, and local).";
leaf external-route-distance {
type uint8 {
range "1..255";
}
description
"Administrative distance for routes learned from external
BGP (eBGP).";
}
leaf internal-route-distance {
type uint8 {
range "1..255";
}
description
"Administrative distance for routes learned from internal
BGP (iBGP).";
}
}
grouping bgp-confederation_config {
description
"Configuration options specifying parameters when the local
router is within an autonomous system which is part of a BGP
confederation.";
leaf identifier {
type inet:as-number;
description
"Confederation identifier for the autonomous system.";
}
leaf-list member-as {
type inet:as-number;
description
"Remote autonomous systems that are to be treated
as part of the local confederation.";
}
}
grouping bgp-neighbor_config {
description
"Neighbor level configuration items.";
Shaikh, et al. Expires September 10, 2015 [Page 9]
Internet-Draft BGP Model March 2015
leaf peer-as {
type inet:as-number;
mandatory "true";
description
"AS number of the peer.";
}
leaf peer-type {
type bgp-types:peer-type;
description
"Explicitly designate the peer or peer group as internal
(iBGP) or external (eBGP).";
}
leaf auth-password {
type string;
description
"Configures an MD5 authentication password for use with
neighboring devices.";
}
leaf remove-private-as {
// could also make this a container with a flag to enable
// remove-private and separate option. here, option implies
// remove-private is enabled.
type bgp-types:remove-private-as-option;
description
"Remove private AS numbers from updates sent to peers.";
}
leaf route-flap-damping {
type boolean;
description
"Enable route flap damping.";
}
leaf send-community {
type bgp-types:community-type;
default "NONE";
description
"Specify which types of community should be sent to the
neighbor or group. The default is to not send the
community attribute";
}
leaf description {
type string;
description
Shaikh, et al. Expires September 10, 2015 [Page 10]
Internet-Draft BGP Model March 2015
"An optional textual description (intended primarily for use
with a peer or group";
}
}
grouping bgp-neighbor-timers_config {
description
"Config parameters related to timers associated with the BGP
peer";
leaf connect-retry {
type decimal64 {
fraction-digits 2;
}
default 30;
description
"Time interval in seconds between attempts to establish a
session with the peer.";
}
leaf hold-time {
type decimal64 {
fraction-digits 2;
}
default 90;
description
"Time interval in seconds that a BGP session will be
considered active in the absence of keepalive or other
messages from the peer. The hold-time is typically
set to 3x the keepalive-interval.";
reference
"RFC 4271 - A Border Gateway Protocol 4, Sec. 10";
}
leaf keepalive-interval {
type decimal64 {
fraction-digits 2;
}
default 30;
description
"Time interval in seconds between transmission of keepalive
messages to the neighbor. Typically set to 1/3 the
hold-time.";
}
leaf minimum-advertisement-interval {
type decimal64 {
fraction-digits 2;
Shaikh, et al. Expires September 10, 2015 [Page 11]
Internet-Draft BGP Model March 2015
}
default 30;
description
"Mininum time interval in seconds between transmission
of BGP updates to neighbors";
reference
"RFC 4271 - A Border Gateway Protocol 4, Sec 10";
}
leaf send-update-delay {
type decimal64 {
fraction-digits 2;
}
description
"Time interval between routes changing in the routing
table and corresponding updates sent to neighbors --
serves to batch updates";
}
}
grouping bgp-neighbor-transport_config {
description
"Configuration parameters relating to the transport protocol
used by the BGP session to the peer";
leaf tcp-mss {
type uint16;
description
"Sets the max segment size for BGP TCP sessions.";
}
leaf mtu-discovery {
type boolean;
description
"Turns path mtu discovery for BGP TCP sessions on (true)
or off (false)";
}
leaf passive-mode {
type boolean;
description
"Wait for peers to issue requests to open a BGP session,
rather than initiating sessions from the local router.";
}
leaf local-address {
type inet:ip-address;
description
Shaikh, et al. Expires September 10, 2015 [Page 12]
Internet-Draft BGP Model March 2015
"Set the local IP (either IPv4 or IPv6) address to use
for the session when sending BGP update messages.";
}
}
grouping bgp-neighbor-error-handling_config {
description
"Configuration parameters relating to enhanced error handling
behaviours for BGP";
leaf treat-as-withdraw {
type boolean;
default "false";
description
"Specify whether erroneous UPDATE messages for which the
NLRI can be extracted are reated as though the NLRI is
withdrawn - avoiding session reset";
reference "draft-ietf-idr-error-handling-16";
}
}
grouping bgp-neighbor-logging-options_config {
description
"Configuration parameters specifying the logging behaviour for
BGP sessions to the peer";
leaf log-neighbor-state-changes {
type boolean;
default "true";
description
"Configure logging of peer state changes. Default is
to enable logging of peer state changes.";
}
}
grouping bgp-neighbor-multihop_config {
description
"Configuration parameters specifying the multihop behaviour for
BGP sessions to the peer";
leaf multihop-ttl {
type uint8;
default 1;
description
"Time-to-live for multihop BGP sessions. The default
value of 1 is for directly connected peers (i.e.,
multihop disabled";
}
Shaikh, et al. Expires September 10, 2015 [Page 13]
Internet-Draft BGP Model March 2015
}
grouping bgp-neighbor-route-reflector_config {
description
"Configuration parameters determining whether the behaviour of
the local system when acting as a route-reflector";
leaf route-reflector-cluster-id {
type bgp-types:rr-cluster-id-type;
description
"route-reflector cluster id to use when local router is
configured as a route reflector. Commonly set at the group
level, but allows a different cluster
id to be set for each neighbor.";
}
leaf route-reflector-client {
type boolean;
default "false";
description
"Configure the neighbor as a route reflector client.";
}
}
grouping bgp-neighbor-as-path-options_config {
description
"Configuration parameters allowing manipulation of the AS_PATH
attribute";
leaf allow-own-as {
// rjs: this could be uint32, but ALU SROS treats as a
// boolean. JUNOS, IOS & IOS XR treat as an integer
// specifying the number of occurrences.
type boolean;
default "false";
description
"Specify whether routes for which the local router's AS
appears in the path are rejected as looped.";
}
leaf replace-peer-as {
type boolean;
default "false";
description
"Replace occurrences of the peer's AS in the AS_PATH
with the local autonomous system number";
}
}
Shaikh, et al. Expires September 10, 2015 [Page 14]
Internet-Draft BGP Model March 2015
grouping bgp-neighbor-add-paths_config {
description
"Configuration parameters specfying whether the local system
will send or receive multiple paths using ADD_PATHS";
leaf receive {
type empty;
description
"Enable ability to receive multiple path advertisements
for an NLRI from the neighbor or group";
}
leaf send-max {
type uint8;
description
"The maximum number of paths to advertise to neighbors
for a single NLRI";
}
}
grouping bgp-neighbor-peer-group_config {
description
"Configuration parameters indicating whether the specified peer
is to be considered as part of a peer-group - and therefore
inherit its configuration";
leaf peer-group {
type leafref {
// we are at /bgp/neighbors/neighbor/
path "/bgp/peer-groups/peer-group/peer-group-name";
require-instance true;
}
description
"The peer-group with which this neighbor is associated";
}
}
grouping bgp-graceful-restart_config {
description
"Configures BGP graceful restart, which is a negotiated
option that indicates that a BGP speaker is able to retain
forwarding state when a BGP session restarts";
reference "RFC 4724: Graceful Restart Mechanism for BGP";
container graceful-restart {
presence
"Presence of this item indicates that BGP graceful restart
is enabled.";
Shaikh, et al. Expires September 10, 2015 [Page 15]
Internet-Draft BGP Model March 2015
description
"Parameters relating the graceful restart mechanism for BGP";
container config {
description
"Configuration parameters relating to graceful-restart";
uses bgp-neighbor-graceful-restart_config;
}
container state {
config false;
description
"State information associated with graceful-restart";
uses bgp-neighbor-graceful-restart_config;
}
}
}
grouping bgp-neighbor-graceful-restart_config {
description
"Configuration parameters relating to BGP graceful restart.";
leaf restart-time {
type uint16 {
range 0..4096;
}
description
"Estimated time in seconds for the BGP session to be
re-established after a restart. This is a 12-bit value
advertised by the router to peers. Per RFC 4724, the
suggested default value is <= the hold-time value";
}
leaf stale-routes-time {
type decimal64 {
fraction-digits 2;
}
description
"Sets an upper bound on the time in seconds that stale
routes will be retained by the router after a session is
restarted";
}
}
// ************************************************************
// * configuration context containers *
// ************************************************************
grouping bgp-global-base {
description
Shaikh, et al. Expires September 10, 2015 [Page 16]
Internet-Draft BGP Model March 2015
"Global configuration parameters for the BGP router";
container config {
description
"Configuration parameters relating to the global BGP router";
uses bgp-global_config;
}
container state {
config false;
description
"State information relating to the global BGP router";
uses bgp-global_config;
uses bgp-op:bgp-global_state;
}
container default-route-distance {
description
"Administrative distance (or preference) assigned to
routes received from different sources
(external, internal, and local).";
container config {
description
"Configuration parameters relating to the default route
distance";
uses bgp-default-route-distance_config;
}
container state {
config false;
description
"State information relating to the default route distance";
uses bgp-default-route-distance_config;
}
}
container confederation {
presence
"Presence of this container indicates that the local AS is
part of a confederation";
description
"Parameters indicating whether the local system acts as part
of a BGP confederation";
container config {
description
"Configuration parameters relating to BGP confederations";
uses bgp-confederation_config;
Shaikh, et al. Expires September 10, 2015 [Page 17]
Internet-Draft BGP Model March 2015
}
container state {
config false;
description
"State information relating to the BGP confederations";
uses bgp-confederation_config;
}
}
uses bgp-mp:bgp-use-multiple-paths_config;
uses bgp-graceful-restart_config;
container afi-safi {
description
"Address family specific configuration";
uses bgp-mp:bgp-global-afi-safi-list;
}
}
grouping bgp-neighbors {
description
"BGP neighbors configured on the local system";
list neighbor {
key "neighbor-address";
description
"List of BGP neighbors configured on the local system,
uniquely identified by peer IPv[46] address";
leaf neighbor-address {
type inet:ip-address;
description
"Address of the BGP peer, either in IPv4 or IPv6";
}
uses bgp-neighbor-group;
}
}
grouping bgp-peer-group {
description
"BGP peer-groups configured on the local system";
list peer-group {
key "peer-group-name";
description
"List of BGP peer-groups configured on the local system -
uniquely identified by peer-group name";
leaf peer-group-name {
type string;
Shaikh, et al. Expires September 10, 2015 [Page 18]
Internet-Draft BGP Model March 2015
description
"";
}
uses bgp-neighbor-group;
}
}
grouping bgp-neighbor-group {
description
"Parameters related to a BGP neighbor or group";
container config {
description
"Configuration parameters relating to the BGP neighbor or
group";
uses bgp-neighbor_config;
}
container state {
config false;
description
"State information relating to the BGP neighbor or group";
uses bgp-neighbor_config;
}
container timers {
description
"Timers related to a BGP neighbor or group";
container config {
description
"Configuration parameters relating to timers used for the
BGP neighbor or group";
uses bgp-neighbor-timers_config;
}
container state {
config false;
description
"State information relating to the timers used for the BGP
neighbor or group";
uses bgp-neighbor-timers_config;
}
}
container transport {
description
"Transport session parameters for the BGP neighbor or group";
container config {
description
"Configuration parameters relating to the transport
Shaikh, et al. Expires September 10, 2015 [Page 19]
Internet-Draft BGP Model March 2015
session(s) used for the BGP neighbor or group";
uses bgp-neighbor-transport_config;
}
container state {
config false;
description
"State information relating to the transport session(s)
used for the BGP neighbor or group";
uses bgp-neighbor-transport_config;
}
}
container error-handling {
description
"Error handling parameters used for the BGP neighbor or
group";
container config {
description
"Configuration parameters enabling or modifying the
behavior or enhanced error handling mechanisms for the BGP
neighbor or group";
uses bgp-neighbor-error-handling_config;
}
container state {
config false;
description
"State information relating to enhanced error handling
mechanisms for the BGP neighbor or group";
uses bgp-neighbor-error-handling_config;
}
}
container logging-options {
description
"Logging options for events related to the BGP neighbor or
group";
container config {
description
"Configuration parameters enabling or modifying logging
for events relating to the BGP neighbor or group";
uses bgp-neighbor-logging-options_config;
}
container state {
config false;
description
"State information relating to logging for the BGP neighbor
or group";
uses bgp-neighbor-logging-options_config;
Shaikh, et al. Expires September 10, 2015 [Page 20]
Internet-Draft BGP Model March 2015
}
}
container ebgp-multihop {
description
"eBGP multi-hop parameters for the BGP neighbor or group";
container config {
description
"Configuration parameters relating to eBGP multihop for the
BGP neighbor or group";
uses bgp-neighbor-multihop_config;
}
container state {
config false;
description
"State information for eBGP multihop, for the BGP neighbor
or group";
uses bgp-neighbor-multihop_config;
}
}
container route-reflector {
description
"Route reflector parameters for the BGP neighbor or group";
container config {
description
"Configuraton parameters relating to route reflection
for the BGP neighbor or group";
uses bgp-neighbor-route-reflector_config;
}
container state {
config false;
description
"State information relating to route reflection for the
BGP neighbor or group";
uses bgp-neighbor-route-reflector_config;
}
}
container as-path-options {
description
"AS_PATH manipulation parameters for the BGP neighbor or
group";
container config {
description
"Configuration parameters relating to AS_PATH manipulation
for the BGP peer or group";
uses bgp-neighbor-as-path-options_config;
Shaikh, et al. Expires September 10, 2015 [Page 21]
Internet-Draft BGP Model March 2015
}
container state {
config false;
description
"State information relating to the AS_PATH manipulation
mechanisms for the BGP peer or group";
uses bgp-neighbor-as-path-options_config;
}
}
container add-paths {
description
"Parameters relating to the advertisement and receipt of
multiple paths for a single NLRI (add-paths)";
container config {
description
"Configuration parameters relating to ADD_PATHS";
uses bgp-neighbor-add-paths_config;
}
container state {
config false;
description
"State information associated with ADD_PATHS";
uses bgp-neighbor-add-paths_config;
}
}
container afi-safi {
description
"Per-address-family configuration parameters associated with
the neighbor or group";
uses bgp-mp:bgp-global-afi-safi-list;
}
uses bgp-graceful-restart_config;
uses rpol:apply-policy-group;
}
// add peer-group pointer only for the neighbor list
augment /bgp/neighbors/neighbor/config {
description
"Augmentation to allow association of a neighbor with a
peer-group";
uses bgp-neighbor-peer-group_config;
}
augment /bgp/neighbors/neighbor/state {
Shaikh, et al. Expires September 10, 2015 [Page 22]
Internet-Draft BGP Model March 2015
description
"Augmentation to reflect the association of a neighbor with a
peer-group";
uses bgp-neighbor-peer-group_config;
}
augment /bgp/peer-groups/peer-group {
description
"Augmentation to add multipath configuration to a peer-group";
uses bgp-mp:bgp-use-multiple-paths_config;
}
augment /bgp/neighbors/neighbor {
description
"Augmentation to add the multipath configuration to a
neighbor";
uses bgp-mp:bgp-use-multiple-paths-neighbor_config;
}
// ************************************************************
// * Augmentations to add state *
// * (rjs: cleaner to have these in the base module to avoid *
// needing to specify which module - e.g. augment of *
// /bgp:bgp/bgp:neighbors/bgp:neighbor...) *
// ************************************************************
augment /bgp/neighbors/neighbor/state {
description
"Augmentation to add operational state related to a particular
BGP neighbor";
uses bgp-op:bgp-neighbor_state;
}
augment /bgp/neighbors/bgp:neighbor/state {
description
"Augmentation to add operational state related to a particular
BGP neighbor";
container messages {
description
"Counters for BGP messages sent and received from the
neighbor";
container sent {
description
"Counters relating to BGP messages sent to the neighbor";
uses bgp-op:bgp-neighbor-message-counters-sent_state;
}
container received {
Shaikh, et al. Expires September 10, 2015 [Page 23]
Internet-Draft BGP Model March 2015
description
"Counters for BGP messages received from the neighbor";
uses bgp-op:bgp-neighbor-message-counters-received_state;
}
}
container queues {
description
"Counters related to queued messages associated with the
BGP neighbor";
uses bgp-op:bgp-neighbor-queue-counters_state;
}
}
augment /bgp:bgp/bgp:neighbors/neighbor/timers/state {
description
"Augmentation to add the operational state of timers associated
with the BGP neighbor";
uses bgp-op:bgp-neighbor-timers_state;
}
augment /bgp/neighbors/neighbor/transport/state {
description
"Augmentation to add the operational state of the transport
session associated with the BGP neighbor";
uses bgp-op:bgp-neighbor-transport_state;
}
augment /bgp/neighbors/neighbor/error-handling/state {
description
"Augmentation to add the operational state of the error
handling associated with the BGP neighbor";
uses bgp-op:bgp-neighbor-error-handling_state;
}
augment /bgp/neighbors/neighbor/graceful-restart/state {
description
"Augmentation to add the operational state of graceful-restart
associated with a BGP neighbor";
uses bgp-op:bgp-afi-safi-graceful-restart_state;
}
augment /bgp/peer-groups/peer-group/state {
description
"Augmentation to add the operational state and counters
relating to a BGP peer-group";
uses bgp-op:bgp-peer-group_state;
}
Shaikh, et al. Expires September 10, 2015 [Page 24]
Internet-Draft BGP Model March 2015
augment /bgp/global/afi-safi/afi-safi/state {
description
"Augmentation to add operational state and counters
on a per-AFI-SAFI basis to the global BGP router";
uses bgp-op:bgp-global-afi-safi_state;
}
augment /bgp/neighbors/neighbor/afi-safi/afi-safi/state {
description
"Augmentation to add per-AFI-SAFI operational state
and counters to the BGP neighbor";
uses bgp-op:bgp-neighbor-afi-safi_state;
}
// ************************************************************
// * module structure containers *
// ************************************************************
container bgp {
presence "Container for BGP protocol hierarchy";
description
"Top-level configuration and state for the BGP router";
container global {
description
"Global configuration for the BGP router";
uses bgp-global-base;
uses rpol:apply-policy-group;
}
container neighbors {
description
"Configuration for BGP neighbors";
uses bgp-neighbors;
}
container peer-groups {
description
"Configuration for BGP peer-groups";
uses bgp-peer-group;
}
}
}
<CODE ENDS>
Shaikh, et al. Expires September 10, 2015 [Page 25]
Internet-Draft BGP Model March 2015
5.2. BGP base types
<CODE BEGINS> file bgp-types.yang
module bgp-types {
yang-version "1";
namespace "http://openconfig.net/yang/bgp-types";
prefix "bgp-types";
import ietf-inet-types { prefix inet; }
import ietf-yang-types { prefix yang; }
// meta
organization
"OpenConfig working group";
contact
"OpenConfig working group
netopenconfig@googlegroups.com";
description
"This module contains general data definitions for use in BGP
policy. It can be imported by modules that make use of BGP
attributes";
revision "2015-03-03" {
description "Initial revision";
reference "TBD";
}
typedef peer-type {
type enumeration {
enum INTERNAL {
description "internal (iBGP) peer";
}
enum EXTERNAL {
description "external (eBGP) peer";
}
}
description
"labels a peer or peer group as explicitly internal or
external";
}
typedef remove-private-as-option {
type enumeration {
Shaikh, et al. Expires September 10, 2015 [Page 26]
Internet-Draft BGP Model March 2015
enum ALL {
description "remove all private ASes in the path";
}
enum REPLACE {
description "replace private ASes with local AS";
}
}
description
"set of options for configuring how private AS path numbers
are removed from advertisements";
}
typedef percentage {
type uint8 {
range "0..100";
}
description
"Integer indicating a percentage value";
}
typedef rr-cluster-id-type {
type union {
type uint32;
type inet:ipv4-address;
}
description
"union type for route reflector cluster ids:
option 1: 4-byte number
option 2: IP address";
}
typedef community-type {
type enumeration {
enum STANDARD {
description "send only standard communities";
}
enum EXTENDED {
description "send only extended communities";
}
enum BOTH {
description "send both standard and extended communities";
}
enum NONE {
description "do not send any community attribute";
}
}
description
"type describing variations of community attributes:
Shaikh, et al. Expires September 10, 2015 [Page 27]
Internet-Draft BGP Model March 2015
STANDARD: standard BGP community [rfc1997]
EXTENDED: extended BGP community [rfc4360]
BOTH: both standard and extended community";
}
identity bgp-capability {
description "Base identity for a BGP capability";
}
identity MPBGP {
base "bgp-capability";
description
"Multi-protocol extensions to BGP";
reference "RFC2858";
}
identity ROUTE-REFRESH {
base "bgp-capability";
description
"The BGP route-refresh functionality";
reference "RFC2918";
}
identity ASN32 {
base "bgp-capability";
description
"4-byte (32-bit) AS number functionality";
reference "RFC6793";
}
identity GRACEFUL-RESTART {
base "bgp-capability";
description
"Graceful restart functionality";
reference "RFC4724";
}
identity ADD-PATHS {
base "bgp-capability";
description
"BGP add-paths";
reference "draft-ietf-idr-add-paths";
}
identity afi-safi-type {
description
"Base identity type for AFI,SAFI tuples for BGP-4";
reference "RFC4760 - multiprotocol extensions for BGP-4";
Shaikh, et al. Expires September 10, 2015 [Page 28]
Internet-Draft BGP Model March 2015
}
identity ipv4-unicast {
base afi-safi-type;
description
"IPv4 unicast (AFI,SAFI = 1,1)";
reference "RFC4760";
}
identity ipv6-unicast {
base afi-safi-type;
description
"IPv6 unicast (AFI,SAFI = 2,1)";
reference "RFC4760";
}
identity ipv4-labelled-unicast {
base afi-safi-type;
description
"Labelled IPv4 unicast (AFI,SAFI = 1,4)";
reference "RFC3107";
}
identity ipv6-labelled-unicast {
base afi-safi-type;
description
"Labelled IPv6 unicast (AFI,SAFI = 2,4)";
reference "RFC3107";
}
identity l3vpn-ipv4-unicast {
base afi-safi-type;
description
"Unicast IPv4 MPLS L3VPN (AFI,SAFI = 1,128)";
reference "RFC4364";
}
identity l3vpn-ipv6-unicast {
base afi-safi-type;
description
"Unicast IPv6 MPLS L3VPN (AFI,SAFI = 2,128)";
reference "RFC4659";
}
identity l3vpn-ipv4-multicast {
base afi-safi-type;
description
"Multicast IPv4 MPLS L3VPN (AFI,SAFI = 1,129)";
Shaikh, et al. Expires September 10, 2015 [Page 29]
Internet-Draft BGP Model March 2015
reference "RFC6514";
}
identity l3vpn-ipv6-multicast {
base afi-safi-type;
description
"Multicast IPv6 MPLS L3VPN (AFI,SAFI = 2,129)";
reference "RFC6514";
}
identity l2vpn-vpls {
base afi-safi-type;
description
"BGP-signalled VPLS (AFI,SAFI = 25,65)";
reference "RFC4761";
}
identity l2vpn-evpn {
base afi-safi-type;
description
"BGP MPLS Based Ethernet VPN (AFI,SAFI = 25,70)";
}
typedef bgp-session-direction {
type enumeration {
enum INBOUND {
description
"Refers to all NLRI received from the BGP peer";
}
enum OUTBOUND {
description
"Refers to all NLRI advertised to the BGP peer";
}
}
description
"Type to describe the direction of NLRI transmission";
}
}
<CODE ENDS>
5.3. BGP policy items
<CODE BEGINS> file bgp-policy.yang
module bgp-policy {
Shaikh, et al. Expires September 10, 2015 [Page 30]
Internet-Draft BGP Model March 2015
yang-version "1";
// namespace
namespace "http://openconfig.net/yang/bgp-policy";
prefix "bgp-pol";
// import some basic types
import ietf-inet-types { prefix inet; }
import routing-policy {prefix rpol; }
import policy-types {prefix pt; }
// meta
organization
"OpenConfig working group";
contact
"OpenConfig working group
netopenconfig@googlegroups.com";
description
"This module contains data definitions for BGP routing policy.
It augments the base routing-policy module with BGP-specific
options for conditions and actions.";
revision "2014-11-30" {
description
"Updated model to augment base routing-policy module";
reference "TBD";
}
// extension statements
// feature statements
// identity statements
// typedef statements
typedef bgp-as-path-prepend-repeat {
type uint8;
description
"Option for the BGP as-prepend policy action. Prepends the
local AS number repeated n times";
}
Shaikh, et al. Expires September 10, 2015 [Page 31]
Internet-Draft BGP Model March 2015
typedef bgp-well-known-community-type {
type enumeration {
enum INTERNET {
description "entire Internet community (0x00000000)";
}
enum NO_EXPORT {
// value 0xFFFFFF01;
description "no export";
}
enum NO_ADVERTISE {
description "no advertise (0xFFFFFF02)";
}
enum NO_EXPORT_SUBCONFED {
description "no export subconfed, equivalent to
local AS (0xFFFFFF03)";
}
}
description
"Type definition for well-known IETF community attribute
values";
reference "RFC 1997 - BGP Communities Attribute";
}
typedef bgp-std-community-type {
// TODO: further refine restrictions and allowed patterns
// 4-octet value:
// <as number> 2 octets
// <community value> 2 octets
type union {
type uint32 {
// per RFC 1997, 0x00000000 - 0x0000FFFF and 0xFFFF0000 -
// 0xFFFFFFFF are reserved
range "65536..4294901759"; // 0x00010000..0xFFFEFFFF
}
type string {
pattern '([0-9]+:[0-9]+)';
}
}
description
"Type definition for standard commmunity attributes";
reference "RFC 1997 - BGP Communities Attribute";
}
typedef bgp-ext-community-type {
// TODO: needs more work to make this more precise given the
// variability of extended community attribute specifications
// 8-octet value:
Shaikh, et al. Expires September 10, 2015 [Page 32]
Internet-Draft BGP Model March 2015
// <type> 2 octects
// <value> 6 octets
type string {
pattern '([0-9\.]+(:[0-9]+)?:[0-9]+)';
}
description
"Type definition for extended community attributes";
reference "RFC 4360 - BGP Extended Communities Attribute";
}
typedef bgp-community-regexp-type {
// TODO: needs more work to decide what format these regexps can
// take.
type string;
description
"Type definition for communities specified as regular
expression patterns";
}
typedef bgp-origin-attr-type {
type enumeration {
enum IGP {
value 0;
description "Origin of the NLRI is internal";
}
enum EGP {
value 1;
description "Origin of the NLRI is EGP";
}
enum INCOMPLETE {
value 2;
description "Origin of the NLRI is neither IGP or EGP";
}
}
description
"Type definition for standard BGP origin attribute";
reference "RFC 4271 - A Border Gateway Protocol 4 (BGP-4),
Sec 4.3";
}
typedef bgp-set-community-option-type {
type enumeration {
enum ADD {
description "add the specified communities to the existing
community attribute";
}
enum REMOVE {
description "remove the specified communities from the
Shaikh, et al. Expires September 10, 2015 [Page 33]
Internet-Draft BGP Model March 2015
existing community attribute";
}
enum REPLACE {
description "replace the existing community attribute with
the specified communities";
}
enum NULL {
description "set the community attribute to empty / NULL";
}
}
description
"Type definition for options when setting the community
attribute in a policy action";
}
typedef bgp-next-hop-type {
type union {
type inet:ip-address;
type enumeration {
enum SELF {
description "special designation for local router's own
address, i.e., next-hop-self";
}
}
}
description "type definition for specifying next-hop in policy
actions";
}
typedef bgp-set-med-type {
type union {
type uint32;
type enumeration {
enum IGP {
description "set the MED value to the IGP cost toward the
next hop for the route";
}
}
}
description "type definition for specifying how the BGP MED can
be set in BGP policy actions";
}
// grouping statements
grouping bgp-match-conditions {
description
"Condition statement definitions for checking membership in a
Shaikh, et al. Expires September 10, 2015 [Page 34]
Internet-Draft BGP Model March 2015
defined set";
container match-community-set {
presence
"The presence of this container indicates that the routes
should match the referenced community-set";
description
"Match a referenced community-set according to the logic
defined in the match-set-options leaf";
leaf community-set {
type leafref {
path "/rpol:routing-policy/rpol:defined-sets/" +
"bgp-pol:bgp-defined-sets/bgp-pol:community-set/" +
"bgp-pol:community-set-name";
require-instance true;
}
description
"References a defined community set";
}
uses rpol:match-set-options-group;
}
container match-ext-community-set {
presence
"The presence of this container indicates that the routes
should match the referenced extended community set";
description
"Match a referenced extended community-set according to the
logic defined in the match-set-options leaf";
leaf ext-community-set {
type leafref {
path "/rpol:routing-policy/rpol:defined-sets/" +
"bgp-pol:bgp-defined-sets/bgp-pol:ext-community-set/" +
"bgp-pol:ext-community-set-name";
require-instance true;
}
description "References a defined extended community set";
}
uses rpol:match-set-options-group;
}
container match-as-path-set {
presence
"The presence of this container indicates that the route
Shaikh, et al. Expires September 10, 2015 [Page 35]
Internet-Draft BGP Model March 2015
should match the referenced as-path set";
description
"Match a referenced as-path set according to the logic
defined in the match-set-options leaf";
leaf as-path-set {
type leafref {
path "/rpol:routing-policy/rpol:defined-sets/" +
"bgp-pol:bgp-defined-sets/bgp-pol:as-path-set/" +
"bgp-pol:as-path-set-name";
require-instance true;
}
description "References a defined AS path set";
}
uses rpol:match-set-options-group;
}
}
grouping bgp-attribute-conditions {
description
"Condition statement definitions for comparing a BGP route
attribute to a specified value";
leaf med-eq {
type uint32;
description
"Condition to check if the received MED value is equal to
the specified value";
}
leaf origin-eq {
type bgp-origin-attr-type;
description
"Condition to check if the route origin is equal to the
specified value";
}
leaf-list next-hop-in {
type inet:ip-address;
description
"List of next hop addresses to check for in the route
update";
}
leaf local-pref-eq {
type uint32;
// TODO: add support for other comparisons if needed
Shaikh, et al. Expires September 10, 2015 [Page 36]
Internet-Draft BGP Model March 2015
description
"Condition to check if the local pref attribute is equal to
the specified value";
}
container community-count {
presence "node is present in the config data to indicate a
community-count condition";
description
"Value and comparison operations for conditions based on the
number of communities in the route update";
uses pt:attribute-compare-operators;
}
container as-path-length {
presence "node is present in the config data to indicate a
as-path-length condition";
description
"Value and comparison operations for conditions based on the
length of the AS path in the route update";
uses pt:attribute-compare-operators;
}
leaf route-type {
// TODO: verify extent of vendor support for this comparison
type enumeration {
enum INTERNAL {
description "route type is internal";
}
enum EXTERNAL {
description "route type is external";
}
}
description
"Condition to check the route type in the route update";
}
}
// augment statements
Shaikh, et al. Expires September 10, 2015 [Page 37]
Internet-Draft BGP Model March 2015
augment "/rpol:routing-policy/rpol:defined-sets" {
description "adds BGP defined sets container to routing policy
model";
container bgp-defined-sets {
description
"BGP-related set definitions for policy match conditions";
list community-set {
key community-set-name;
description
"Definitions for community sets";
leaf community-set-name {
type string;
mandatory true;
description
"name / label of the community set -- this is used to
reference the set in match conditions";
}
leaf-list community-members {
type union {
type bgp-std-community-type;
type bgp-community-regexp-type;
type bgp-well-known-community-type;
}
description
"members of the community set";
}
}
list ext-community-set {
key ext-community-set-name;
description
"Definitions for extended community sets";
leaf ext-community-set-name {
type string;
description
"name / label of the extended community set -- this is
used to reference the set in match conditions";
}
leaf-list ext-community-members {
type union {
type bgp-ext-community-type;
Shaikh, et al. Expires September 10, 2015 [Page 38]
Internet-Draft BGP Model March 2015
// TODO: is regexp support needed for extended
// communities?
type bgp-community-regexp-type;
}
description
"members of the extended community set";
}
}
list as-path-set {
key as-path-set-name;
description
"Definitions for AS path sets";
leaf as-path-set-name {
type string;
description
"name of the AS path set -- this is used to reference the
the set in match conditions";
}
leaf-list as-path-set-members {
// TODO: need to refine typedef for AS path expressions
type string;
description
"AS path expression -- list of ASes in the set";
}
}
}
}
augment "/rpol:routing-policy/rpol:policy-definition/" +
"rpol:statement/rpol:conditions" {
description "BGP policy conditions added to routing policy
module";
container bgp-conditions {
description "Policy conditions for matching
BGP-specific defined sets or comparing BGP-specific
attributes";
uses bgp-match-conditions;
uses bgp-attribute-conditions;
}
}
augment "/rpol:routing-policy/rpol:policy-definition/" +
Shaikh, et al. Expires September 10, 2015 [Page 39]
Internet-Draft BGP Model March 2015
"rpol:statement/rpol:actions" {
description "BGP policy actions added to routing policy
module";
container bgp-actions {
description
"Definitions for policy action statements that
change BGP-specific attributes of the route";
container set-as-path-prepend {
presence "node is pesent in the config data to use the AS
prepend action";
description
"action to prepend local AS number to the AS-path a
specified number of times";
leaf repeat-n {
type uint8;
description "number of times to prepend the local AS
number";
}
}
container set-community {
presence "node is present in the config data when
set-community action is used";
description
"action to set the community attributes of the route, along
with options to modify how the community is modified";
leaf-list communities {
type union {
type bgp-std-community-type;
type bgp-well-known-community-type;
}
description
"community values for the update";
}
leaf options {
type bgp-set-community-option-type;
description
"options for modifying the community attribute with the
specified values";
}
}
Shaikh, et al. Expires September 10, 2015 [Page 40]
Internet-Draft BGP Model March 2015
container set-ext-community {
presence "node is present in the config data when
set-community action is used";
description
"action to set the extended community attributes of the
route, along with options to modify how the community is
modified";
leaf-list communities {
type union {
type bgp-ext-community-type;
type bgp-well-known-community-type;
}
description
"community values for the update";
}
leaf options {
type bgp-set-community-option-type;
description
"options for modifying the community attribute with the
specified values";
}
}
leaf set-route-origin {
type bgp-origin-attr-type;
description "set the origin attribute to the specified
value";
}
leaf set-local-pref {
type uint32;
description "set the local pref attribute on the route
update";
}
leaf set-next-hop {
type bgp-next-hop-type;
description "set the next-hop attribute in the route update";
}
leaf set-med {
type bgp-set-med-type;
description "set the med metric attribute in the route
update";
}
Shaikh, et al. Expires September 10, 2015 [Page 41]
Internet-Draft BGP Model March 2015
}
}
// rpc statements
// notification statements
}
<CODE ENDS>
5.4. BGP multiprotocol items
<CODE BEGINS> file bgp-multiprotocol.yang
module bgp-multiprotocol {
yang-version "1";
// namespace
namespace "http://openconfig.net/yang/bgp-multiprotocol";
prefix "bgp-mp";
// import some basic inet types
import routing-policy { prefix rpol; }
import bgp-types { prefix bgp-types; }
import bgp-operational { prefix bgp-op; }
// meta
organization
"OpenConfig working group";
contact
"OpenConfig working group
netopenconfig@googlegroups.com";
description
"This module is part of a YANG model for BGP protocol
configuration, focusing on configuration of multiprotocol
BGP, in particular various relevant address families (AFI) and
sub-address families (SAFI).
Identities (rather than enumerated types) are used to identify
each AFI / SAFI type to make it easier for users to extend to
pre-standard or custom AFI/SAFI types. This module is only
intended to capture the most";
revision "2014-11-30" {
Shaikh, et al. Expires September 10, 2015 [Page 42]
Internet-Draft BGP Model March 2015
description
"Refactored multiprotocol module";
reference "TBD";
}
grouping ipv4-unicast-group {
description
"Group for IPv4 Unicast configuration options";
container ipv4-unicast {
when "../afi-safi-name = 'bgp-mp:ipv4-unicast'" {
description
"Include this container for IPv4 Unicast specific
configuration";
}
presence
"Presence of this container indicates that the IPv4 Unicast
AFI,SAFI is enabled for a neighbour or group";
description "IPv4 unicast configuration options";
// include common IPv[46] unicast options
uses ipv4-ipv6-unicast-common;
// placeholder for IPv4 unicast specific configuration
}
}
grouping ipv6-unicast-group {
description
"Group for IPv6 Unicast configuration options";
container ipv6-unicast {
when "../afi-safi-name = 'bgp-mp:ipv6-unicast'" {
description
"Include this container for IPv6 Unicast specific
configuration";
}
presence
"Presence of this container indicates that the IPv6 Unicast
AFI,SAFI is enabled for a neighbour or group";
description "IPv6 unicast configuration options";
// include common IPv[46] unicast options
uses ipv4-ipv6-unicast-common;
Shaikh, et al. Expires September 10, 2015 [Page 43]
Internet-Draft BGP Model March 2015
// placeholder for IPv6 unicast specific configuration
// options
}
}
grouping ipv4-labelled-unicast-group {
description
"Group for IPv4 Labelled Unicast configuration options";
container ipv4-labelled-unicast {
when "../afi-safi-name = 'bgp-mp:ipv4-labelled-unicast'" {
description
"Include this container for IPv4 Labelled Unicast specific
configuration";
}
presence
"Presence of this container indicates that the IPv4 Labelled
Unicast AFI,SAFI is enabled for a neighbour or group";
description "IPv4 Labelled Unicast configuration options";
uses all-afi-safi-common;
// placeholder for IPv4 Labelled Unicast specific config
// options
}
}
grouping ipv6-labelled-unicast-group {
description
"Group for IPv6 Labelled Unicast configuration options";
container ipv6-labelled-unicast {
when "../afi-safi-name = 'bgp-mp:ipv6-labelled-unicast'" {
description
"Include this container for IPv6 Labelled Unicast specific
configuration";
}
presence
"Presence of this container indicates that the IPv6 Labelled
Unicast AFI,SAFI is enabled for a neighbour or group";
description "IPv6 Labelled Unicast configuration options";
uses all-afi-safi-common;
Shaikh, et al. Expires September 10, 2015 [Page 44]
Internet-Draft BGP Model March 2015
// placeholder for IPv6 Labelled Unicast specific config
// options.
}
}
grouping l3vpn-ipv4-unicast-group {
description
"Group for IPv4 Unicast L3VPN configuration options";
container l3vpn-ipv4-unicast {
when "../afi-safi-name = 'bgp-mp:l3vpn-ipv4-unicast'" {
description
"Include this container for IPv4 Unicast L3VPN specific
configuration";
}
presence
"Presence of this container indicates that IPv4 Unicast L3VPN
AFI,SAFI is enabled for a neighbour or group";
description "Unicast IPv4 L3VPN configuration options";
// include common L3VPN configuration options
uses l3vpn-ipv4-ipv6-unicast-common;
// placeholder for IPv4 Unicast L3VPN specific config options.
}
}
grouping l3vpn-ipv6-unicast-group {
description
"Group for IPv6 Unicast L3VPN configuration options";
container l3vpn-ipv6-unicast {
when "../afi-safi-name = 'bgp-mp:l3vpn-ipv6-unicast'" {
description
"Include this container for unicast IPv6 L3VPN specific
configuration";
}
presence "Presence of this container indicates that the IPv6
Unicast L3VPN AFI,SAFI is enabled";
description "Unicast IPv6 L3VPN configuration options";
// include common L3VPN configuration options
uses l3vpn-ipv4-ipv6-unicast-common;
Shaikh, et al. Expires September 10, 2015 [Page 45]
Internet-Draft BGP Model March 2015
// placeholder for IPv6 Unicast L3VPN specific configuration
// options
}
}
grouping l3vpn-ipv4-multicast-group {
description
"Group for IPv4 L3VPN multicast configuration options";
container l3vpn-ipv4-multicast {
when "../afi-safi-name = 'bgp-mp:l3vpn-ipv4-multicast'" {
description
"Include this container for multicast IPv6 L3VPN specific
configuration";
}
presence "Presence of this container indicates the
IPv4 L3VPN Unicast AFI-SAFI is enabled";
description "Multicast IPv4 L3VPN configuration options";
// include common L3VPN multicast options
uses l3vpn-ipv4-ipv6-multicast-common;
// placeholder for IPv4 Multicast L3VPN specific configuration
// options
}
}
grouping l3vpn-ipv6-multicast-group {
description
"Group for IPv6 L3VPN multicast configuration options";
container l3vpn-ipv6-multicast {
when "../afi-safi-name = 'bgp-mp:l3vpn-ipv6-multicast'" {
description
"Include this container for multicast IPv6 L3VPN specific
configuration";
}
presence
"Presence of this container indicates that the IPv6 Multicast
L3VPN AFI,SAFI is enabled";
description "Multicast IPv6 L3VPN configuration options";
// include common L3VPN multicast options
uses l3vpn-ipv4-ipv6-multicast-common;
Shaikh, et al. Expires September 10, 2015 [Page 46]
Internet-Draft BGP Model March 2015
// placeholder for IPv6 Multicast L3VPN specific configuration
// options
}
}
grouping l2vpn-vpls-group {
description
"Group for BGP-signalled VPLS configuration options";
container l2vpn-vpls {
when "../afi-safi-name = 'bgp-mp:l2vpn-vpls'" {
description
"Include this container for BGP-signalled VPLS specific
configuration";
}
presence
"Presence of this container indicates that the BGP-signalled
VPLS AFI,SAFI is enabled";
description "BGP-signalled VPLS configuration options";
// include common L2VPN options
uses l2vpn-common;
// placeholder for BGP-signalled VPLS specific configuration
// options
}
}
grouping l2vpn-evpn-group {
description
"Group for BGP EVPN configuration options";
container l2vpn-evpn {
when "../afi-safi-name = 'bgp-mp:l2vpn-evpn'" {
description
"Include this container for BGP EVPN specific
configuration";
}
presence
"Presence of this container indicates that the BGP EVPN
AFI,SAFI is enabled";
description "BGP EVPN configuration options";
// include common L2VPN options
Shaikh, et al. Expires September 10, 2015 [Page 47]
Internet-Draft BGP Model March 2015
uses l2vpn-common;
// placeholder for BGP EVPN specific configuration options
}
}
grouping bgp-route-selection-options_config {
description
"Set of configuration options that govern best
path selection.";
leaf always-compare-med {
type boolean;
default "false";
description
"Compare multi-exit discriminator (MED) value from
different ASes when selecting the best route. The
default behavior is to only compare MEDs for paths
received from the same AS.";
}
leaf ignore-as-path-length {
type boolean;
default "false";
description
"Ignore the AS path length when selecting the best path.
The default is to use the AS path length and prefer paths
with shorter length.";
}
leaf external-compare-router-id {
type boolean;
default "true";
description
"When comparing similar routes received from external
BGP peers, use the router-id as a criterion to select
the active path.";
}
leaf advertise-inactive-routes {
type boolean;
default "false";
description
"Advertise inactive routes to external peers. The
default is to only advertise active routes.";
}
Shaikh, et al. Expires September 10, 2015 [Page 48]
Internet-Draft BGP Model March 2015
leaf enable-aigp {
type empty;
description
"Flag to enable sending / receiving accumulated IGP
attribute in routing updates";
}
leaf ignore-next-hop-igp-metric {
type boolean;
default "false";
description
"Ignore the IGP metric to the next-hop when calculating
BGP best-path. The default is to select the route for
which the metric to the next-hop is lowest";
}
}
grouping bgp-use-multiple-paths-ebgp-as-options_config {
description
"Configuration parameters specific to eBGP multipath applicable
to all contexts";
leaf allow-multiple-as {
type boolean;
default "false";
description
"Allow multipath to use paths from different neighbouring
ASes. The default is to only consider multiple paths from
the same neighbouring AS.";
}
}
grouping bgp-use-multiple-paths-ebgp_config {
description
"Configuration parameters relating to multipath for eBGP";
uses bgp-use-multiple-paths-ebgp-as-options_config;
leaf maximum-paths {
type uint32;
default 1;
description
"Maximum number of parallel paths to consider when using
BGP multipath. The default is use a single path.";
}
}
grouping bgp-use-multiple-paths-ibgp_config {
Shaikh, et al. Expires September 10, 2015 [Page 49]
Internet-Draft BGP Model March 2015
description
"Configuration parmaeters relating to multipath for iBGP";
leaf maximum-paths {
type uint32;
default 1;
description
"Maximum number of parallel paths to consider when using
iBGP multipath. The default is to use a single path";
}
}
grouping bgp-use-multiple-paths_config {
description
"Configuration parameters relating to multipath for BGP - both
iBGP and eBGP";
container use-multiple-paths {
presence
"Presence of this container indicates that multipath is
enabled for eBGP and iBGP. Absence of the container
indicates that multipath is disabled";
description
"Parameters related to the use of multiple paths for the
same NLRI";
container ebgp {
description
"Multipath parameters for eBGP";
container config {
description
"Configuration parameters relating to eBGP multipath";
uses bgp-use-multiple-paths-ebgp_config;
}
container state {
config false;
description
"State information relating to eBGP multipath";
uses bgp-use-multiple-paths-ebgp_config;
}
}
container ibgp {
description
"Multipath parameters for iBGP";
container config {
description
Shaikh, et al. Expires September 10, 2015 [Page 50]
Internet-Draft BGP Model March 2015
"Configuration parameters relating to iBGP multipath";
uses bgp-use-multiple-paths-ibgp_config;
}
container state {
config false;
description
"State information relating to iBGP multipath";
uses bgp-use-multiple-paths-ibgp_config;
}
}
}
}
grouping bgp-use-multiple-paths-neighbor_config {
description
"Per-neighbor configuration for multipath for BGP";
container use-multiple-paths {
presence
"Presence of this container indicates that multiple paths
from this neighbor should be installed into the RIB. Absence
of this container results in the multipath configuration
being inherited from the peer-group if it exists.";
description
"Parameters related to the use of multiple-paths for the same
NLRI when they are received only from this neighbor";
container ebgp {
description
"Multipath configuration for eBGP";
container config {
description
"Configuration parameters relating to eBGP multipath";
uses bgp-use-multiple-paths-ebgp-as-options_config;
}
container state {
config false;
description
"State information relating to eBGP multipath";
uses bgp-use-multiple-paths-ebgp-as-options_config;
}
}
}
}
grouping bgp-afi-safi_config {
description
Shaikh, et al. Expires September 10, 2015 [Page 51]
Internet-Draft BGP Model March 2015
"Configuration parameters used for all BGP AFI-SAFIs";
leaf enabled {
type boolean;
default false;
description
"This leaf indicates whether the IPv4 Unicast AFI,SAFI is
enabled for the neighbour or group";
}
}
grouping all-afi-safi-common-prefix-limit_config {
description
"Configuration parameters relating to prefix-limits for an
AFI-SAFI";
leaf max-prefixes {
type uint32;
description
"Maximum number of prefixes that will be accepted
from the neighbour";
}
leaf shutdown-threshold-pct {
type bgp-types:percentage;
description
"Threshold on number of prefixes that can be received
from a neighbour before generation of warning messages
or log entries. Expressed as a percentage of
max-prefixes";
}
leaf restart-timer {
type decimal64 {
fraction-digits 2;
}
units "seconds";
description
"Time interval in seconds after which the BGP session
is re-established after being torn down due to exceeding
the max-prefix limit.";
}
}
grouping ipv4-ipv6-unicast-common_config {
description
"Common configuration parameters for IPv4 and IPv6 Unicast
address families";
Shaikh, et al. Expires September 10, 2015 [Page 52]
Internet-Draft BGP Model March 2015
leaf send-default-route {
type boolean;
default "false";
description
"If set to true, send the default-route to the neighbour(s)";
}
}
grouping all-afi-safi-common {
description
"Grouping for configuration common to all AFI,SAFI";
container prefix-limit {
description
"Configure the maximum number of prefixes that will be
accepted from a peer";
container config {
description
"Configuration parameters relating to the prefix
limit for the AFI-SAFI";
uses all-afi-safi-common-prefix-limit_config;
}
container state {
config false;
description
"State information relating to the prefix-limit for the
AFI-SAFI";
uses all-afi-safi-common-prefix-limit_config;
}
}
}
grouping ipv4-ipv6-unicast-common {
description
"Common configuration that is applicable for IPv4 and IPv6
unicast";
// include common afi-safi options.
uses all-afi-safi-common;
// configuration options that are specific to IPv[46] unicast
container config {
description
"Configuration parameters for common IPv4 and IPv6 unicast
AFI-SAFI options";
uses ipv4-ipv6-unicast-common_config;
}
Shaikh, et al. Expires September 10, 2015 [Page 53]
Internet-Draft BGP Model March 2015
container state {
config false;
description
"State information for common IPv4 and IPv6 unicast
parameters";
uses ipv4-ipv6-unicast-common_config;
}
}
grouping l3vpn-ipv4-ipv6-unicast-common {
description
"Common configuration applied across L3VPN for IPv4
and IPv6";
// placeholder -- specific configuration options that are generic
// across IPv[46] unicast address families.
uses all-afi-safi-common;
}
grouping l3vpn-ipv4-ipv6-multicast-common {
description
"Common configuration applied across L3VPN for IPv4
and IPv6";
// placeholder -- specific configuration options that are
// generic across IPv[46] multicast address families.
uses all-afi-safi-common;
}
grouping l2vpn-common {
description
"Common configuration applied across L2VPN address
families";
// placeholder -- specific configuration options that are
// generic across L2VPN address families
uses all-afi-safi-common;
}
// *********** STRUCTURE GROUPINGS **********************
grouping bgp-global-afi-safi-list {
description
"List of address-families associated with the BGP instance,
a peer-group or neighbor";
list afi-safi {
key "afi-safi-name";
Shaikh, et al. Expires September 10, 2015 [Page 54]
Internet-Draft BGP Model March 2015
description
"AFI,SAFI configuration available for the
neighbour or group";
leaf afi-safi-name {
type identityref {
base bgp-types:afi-safi-type;
}
description "AFI,SAFI";
}
container route-selection-options {
description
"Parameters relating to options for route selection";
container config {
description
"Configuration parameters relating to route selection
options";
uses bgp-route-selection-options_config;
}
container state {
config false;
description
"State information for the route selection options";
uses bgp-route-selection-options_config;
}
}
uses bgp-use-multiple-paths_config;
container config {
description
"Configuration parameters for the AFI-SAFI";
uses bgp-afi-safi_config;
}
container state {
config false;
description
"State information relating to the AFI-SAFI";
uses bgp-afi-safi_config;
uses bgp-op:bgp-afi-safi_state;
}
// import and export policy included for the afi/safi
uses rpol:apply-policy-group;
uses ipv4-unicast-group;
uses ipv6-unicast-group;
Shaikh, et al. Expires September 10, 2015 [Page 55]
Internet-Draft BGP Model March 2015
uses ipv4-labelled-unicast-group;
uses ipv6-labelled-unicast-group;
uses l3vpn-ipv4-unicast-group;
uses l3vpn-ipv6-unicast-group;
uses l3vpn-ipv4-multicast-group;
uses l3vpn-ipv6-multicast-group;
uses l2vpn-vpls-group;
uses l2vpn-evpn-group;
}
}
}
<CODE ENDS>
5.5. BGP operational data items
<CODE BEGINS> file bgp-operational.yang
module bgp-operational {
yang-version "1";
// namespace
// TODO: change to an ietf or other more generic namespace
namespace "http://openconfig.net/yang/bgp-operational";
prefix "bgp-op";
// import some basic inet types
import ietf-inet-types { prefix inet; }
import ietf-yang-types { prefix yang; }
import bgp-types { prefix bgp-types; }
// meta
organization
"OpenConfig working group";
contact
"OpenConfig working group
netopenconfig@googlegroups.com";
description
"This module is part of a YANG model for BGP protocol
configuration, focusing on operational data (i.e., state
variables) related to BGP operations";
revision "2014-12-02" {
Shaikh, et al. Expires September 10, 2015 [Page 56]
Internet-Draft BGP Model March 2015
description
"Initial revision";
reference "TBD";
}
// extension statements
// feature statements
// identity statements
// typedef statements
// grouping statements
grouping bgp-counters-message-types_common {
description
"Grouping of BGP message types, included for re-use
across counters";
leaf UPDATE {
type uint64;
description
"Number of BGP UPDATE messages announcing, withdrawing
or modifying paths exchanged.";
}
leaf NOTIFICATION {
type uint64;
description
"Number of BGP NOTIFICATION messages indicating an
error condition has occurred exchanged.";
}
}
grouping bgp-context-pfx-path-counters_common {
description
"Grouping containing common counters relating to prefixes and
paths";
leaf total-paths {
type uint32;
description
"Total number of BGP paths within the context";
}
leaf total-prefixes {
Shaikh, et al. Expires September 10, 2015 [Page 57]
Internet-Draft BGP Model March 2015
type uint32;
description
"";
}
}
grouping bgp-global_state {
description
"Grouping containing operational parameters relating to the
global BGP instance";
uses bgp-context-pfx-path-counters_common;
}
grouping bgp-global-afi-safi_state {
description
"Grouping containing operational parameters relating to each
AFI-SAFI within the BGP global instance";
uses bgp-context-pfx-path-counters_common;
}
grouping bgp-peer-group_state {
description
"Grouping containing operational parameters relating to a BGP
peer group";
uses bgp-context-pfx-path-counters_common;
}
grouping bgp-neighbor_state {
description
"Grouping containing operational state variables relating to a
BGP neighbor";
leaf session-state {
type enumeration {
enum IDLE {
description
"neighbor is down, and in the Idle state of the
FSM";
}
enum CONNECT {
description
"neighbor is down, and the session is waiting for
the underlying transport session to be established";
}
enum ACTIVE {
description
"neighbor is down, and the local system is awaiting
a conncetion from the remote peer";
Shaikh, et al. Expires September 10, 2015 [Page 58]
Internet-Draft BGP Model March 2015
}
enum OPENSENT {
description
"neighbor is in the process of being established.
The local system has sent an OPEN message";
}
enum OPENCONFIRM {
description
"neighbor is in the process of being established.
The local system is awaiting a NOTIFICATION or
KEEPALIVE message";
}
enum ESTABLISHED {
description
"neighbor is up - the BGP session with the peer is
established";
}
}
description
"Operational state of the BGP peer";
}
leaf-list supported-capabilities {
type identityref {
base bgp-types:bgp-capability;
}
description
"BGP capabilities negotiated as supported with the peer";
}
}
grouping bgp-neighbor-afi-safi_state {
description
"Operational state on a per-AFI-SAFI basis for a BGP
neighbor";
uses bgp-neighbor-prefix-counters_state;
}
grouping bgp-neighbor-prefix-counters_state {
description
"Counters for BGP neighbor sessions";
container prefixes {
description "Prefix counters for the BGP session";
leaf received {
type uint32;
description
Shaikh, et al. Expires September 10, 2015 [Page 59]
Internet-Draft BGP Model March 2015
"The number of prefixes received from the neighbor";
}
leaf sent {
type uint32;
description
"The number of prefixes advertised to the neighbor";
}
leaf installed {
type uint32;
description
"The number of advertised prefixes installed in the
Loc-RIB";
}
}
}
grouping bgp-neighbor-message-counters-sent_state {
description
"Counters relating to messages sent to a BGP neighbor";
uses bgp-counters-message-types_common;
}
grouping bgp-neighbor-message-counters-received_state {
description
"Counters relating to the mesages received from a BGP
neighbor";
uses bgp-counters-message-types_common;
}
grouping bgp-neighbor-queue-counters_state {
description
"Counters relating to the message queues associated with the
BGP peer";
leaf input {
type uint32;
description
"The number of messages received from the peer currently
queued";
}
leaf output {
type uint32;
description
"The number of messages queued to be sent to the peer";
}
}
Shaikh, et al. Expires September 10, 2015 [Page 60]
Internet-Draft BGP Model March 2015
grouping bgp-neighbor-transport_state {
description
"Operational state parameters relating to the transport session
used for the BGP session";
leaf local-port {
type inet:port-number;
description
"Local TCP port being used for the TCP session supporting
the BGP session";
}
leaf remote-address {
type inet:ip-address;
description
"Remote port being used by the peer for the TCP session
supporting the BGP session";
}
leaf remote-port {
type inet:port-number;
description
"Remote address to which the BGP session has been
established";
}
}
grouping bgp-neighbor-error-handling_state {
description
"Operational state parameters relating to enhanced error
error handling for BGP";
leaf erroneous-update-messages {
type uint32;
description
"The number of BGP UPDATE messages for which the
treat-as-withdraw mechanism has been applied based
on erroneous message contents";
}
}
grouping bgp-neighbor-timers_state {
description
"Operational state parameters relating to BGP timers associated
with the BGP session";
leaf uptime {
type yang:timeticks;
Shaikh, et al. Expires September 10, 2015 [Page 61]
Internet-Draft BGP Model March 2015
description
"This timer determines the amount of time since the
BGP last transitioned in or out of the Established
state";
}
leaf negotiated-hold-time {
type decimal64 {
fraction-digits 2;
}
description
"The negotiated hold-time for the BGP session";
}
}
grouping bgp-afi-safi_state {
description
"Operational state information relevant to all address
families that may be carried by the BGP session";
// placeholder - options in this container are
// valid in both the global and per-neighbor
// paths
}
grouping bgp-afi-safi-graceful-restart_state {
description
"Operational state information relevant to graceful restart
for BGP";
leaf active {
type boolean;
description
"Whether graceful-restart has been enabled for the AFI,
SAFI for the peer";
}
leaf peer-restart-time {
type uint16 {
range 0..4096;
}
description
"The period of time (advertised by the peer) that
the peer expects a restart of a BGP session to
take";
}
}
Shaikh, et al. Expires September 10, 2015 [Page 62]
Internet-Draft BGP Model March 2015
}
<CODE ENDS>
6. References
6.1. Normative references
[RFC6020] Bjorklund, M., "YANG - A Data Modeling Language for the
Network Configuration Protocol (NETCONF)", RFC 6020,
October 2010.
[RFC4271] Rekhter, Y., Li, T., and S. Hares, "A Border Gateway
Protocol 4 (BGP-4)", RFC 4271, January 2006.
[RFC4760] Bates, T., Chandra, R., Katz, D., and Y. Rekhter,
"Multiprotocol Extensions for BGP-4", RFC 4760, January
2007.
[RFC6991] Schoenwaelder, J., "Common YANG Data Types", RFC 6991,
July 2013.
[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
January 2004.
6.2. Informative references
[I-D.openconfig-netmod-opstate]
Shakir, R., Shaikh, A., and M. Hines, "Consistent Modeling
of Operational State Data in YANG", draft-openconfig-
netmod-opstate-00 (work in progress), March 2015.
[I-D.shaikh-rtgwg-policy-model]
Shaikh, A., Shakir, R., D'Souza, K., and C. Chase,
"Routing Policy Configuration Model for Service Provider
Networks", draft-shaikh-rtgwg-policy-model-00 (work in
progress), January 2015.
Appendix A. Acknowledgements
The authors are grateful for valuable contributions to this document
and the associated models from: Ebben Aires, Pavan Beeram, Chris
Chase, Ed Crabbe, Luyuan Fang, Bill Fenner, Akshay Gattani, Josh
George, Vijay Gill, Jeff Haas, Ina Minei, Carl Moberg, Ashok
Narayanan, Einar Nilsen-Nygaard, Keyur Patel, Adam Simpson, Puneet
Sood, Jason Sterne, and Jim Uttaro.
Shaikh, et al. Expires September 10, 2015 [Page 63]
Internet-Draft BGP Model March 2015
Appendix B. Change summary
B.1. Changes between revisions -00 and -01
The -01 revision reflects a number of changes, many based on feedback
from implementors of the model on various routing platforms.
o Refactored model to explicitly provide 'config' and 'state'
containers at each leaf node to enable consistent and predictable
access to operational state data corresponding to configuration
data. This is based on the model design in
[I-D.openconfig-netmod-opstate].
o Refactored multiprotocol module with explicit set of supported
AFI-SAFI combinations (using YANG identities) in a flattened list.
Focus was on common config with more AFI-SAFI specific
configuration forthcoming in future revisions.
o Refactored BGP policy module to work with a new general routing
policy model [I-D.shaikh-rtgwg-policy-model] by augmenting it with
BGP-specific policy options (conditions, actions, and defined
sets).
o Added enclosing containers to lists (e.g., neighbors, peer-groups,
and AFI-SAFI)
o Removed neighbor configuration from the peer-group hierarchy.
Neighbor configuration now has a peer-group leaf which references
the peer group to which the neighbor belongs.
o Several new configuration items added to base bgp module,
including adding some configuration items to the global hierarchy
level.
Authors' Addresses
Anees Shaikh
Google
1600 Amphitheatre Pkwy
Mountain View, CA 94043
US
Email: aashaikh@google.com
Shaikh, et al. Expires September 10, 2015 [Page 64]
Internet-Draft BGP Model March 2015
Kevin D'Souza
AT&T
200 S. Laurel Ave
Middletown, NJ
US
Email: kd6913@att.com
Deepak Bansal
Microsoft
205 108th Ave. NE, Suite 400
Bellevue, WA
US
Email: dbansal@microsoft.com
Rob Shakir
BT
pp. C3L, BT Centre
81, Newgate Street
London EC1A 7AJ
UK
Email: rob.shakir@bt.com
URI: http://www.bt.com/
Shaikh, et al. Expires September 10, 2015 [Page 65]
| PAFTECH AB 2003-2026 | 2026-04-24 05:46:16 |