One document matched: draft-richardson-6tisch-security-architecture-00.xml

<?xml version="1.0"?>
<!DOCTYPE rfc SYSTEM "rfc2629.dtd">
<?rfc toc="yes"?>
<?rfc symrefs="yes"?>

<rfc category="info" ipr="trust200902" docName="draft-richardson-6tisch-security-architecture-00">

<front>
  <title abbrev="6tisch-security">
      security architecture for 6top: requirements and structure
  </title>

  <author initials="M." surname="Richardson" fullname="Michael C. Richardson">
    <organization abbrev="SSW">Sandelman Software Works</organization>
    <address>
      <postal>
        <street>470 Dawson Avenue</street>
        <city>Ottawa</city>
        <region>ON</region>
        <code>K1Z 5V7</code>
        <country>CA</country>
      </postal>
      <email>mcr+ietf@sandelman.ca</email>
      <uri>http://www.sandelman.ca/</uri>
    </address>
  </author>

  <date month="December" year="2013" />

<abstract>
  <t>
    This document details minimal layer-2 requirements for 6top use in
    industrial settings, and a few options for accomplishing this.
    The layer-2 mechanism is then extended to provide for per-node
    authentication and authorization of the node/PCE communications.
    This internet-draft is intended for later inclusion into the 6tisch
    architecture document.
  </t>
</abstract>

</front>

<middle>

<section title="Introduction: security bootstrap requirements">
<t>
</t>
</section>
<section title="Requirements Language">
  <t>The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
  "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
  document are to be interpreted as described in <xref
  target="RFC2119">RFC 2119</xref>.</t>
</section>

<section title="possible layer-2 mechanism">
</section>

<section title="6top/PCE security requirements">
</section>

<section title="leveraging layer-2 identies for layer-4 security">
<t>
</t>
</section>

<section title="Security Considerations">
  <t>
  </t>
</section>

<section title="Other Related Protocols"></section>
<section title="IANA Considerations">
<t>
</t>
</section>
<section title="Acknowledgements"></section>
<section title="References">
  <section title="Informative References"></section>
  <section title="Normative References"></section>
</section>

</middle>

<back>
<references title="Normative references">
<?rfc include="reference.RFC.2119" ?>
</references>
</back>
</rfc>