One document matched: draft-ogrcetal-ccamp-flexi-grid-fwk-01.xml
<?xml version="1.0" encoding="iso-8859-1"?>
<!--
vim: set softtabstop=2 shiftwidth=2 expandtab
RCAS: uploaded version
version=201210221403
-->
<?xml-stylesheet type='text/xsl' href='rfc2629.xslt' ?>
<?rfc strict="no" ?>
<?rfc toc="yes"?>
<?rfc tocompact="yes"?>
<?rfc tocdepth="3"?>
<?rfc tocindent="yes"?>
<?rfc symrefs="yes"?>
<?rfc sortrefs="yes" ?>
<?rfc comments="yes"?>
<?rfc inline="yes"?>
<?rfc compact="yes"?>
<?rfc subcompact="no"?>
<!DOCTYPE rfc SYSTEM "rfc2629.dtd" [
<!ENTITY RFC2119 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2119.xml">
<!ENTITY RFC3945 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.3945.xml">
<!ENTITY RFC4206 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.4206.xml">
<!ENTITY RFC4397 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.4397.xml">
<!ENTITY RFC5150 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.5150.xml">
<!ENTITY RFC6163 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.6163.xml">
]>
<rfc category="std" docName="draft-ogrcetal-ccamp-flexi-grid-fwk-01" ipr="trust200902" >
<front>
<title abbrev="GMPLS Flexi-grid Framework">Framework for GMPLS based control of Flexi-grid DWDM networks</title>
<author fullname="Oscar Gonzalez de Dios" initials="O." role="editor" surname="Gonzalez de Dios">
<organization>Telefónica I+D</organization>
<address>
<postal>
<street>Don Ramon de la Cruz 82-84</street>
<city>Madrid</city>
<region></region>
<code>28045</code>
<country>Spain</country>
</postal>
<phone>+34913128832</phone>
<email>ogondio@tid.es</email>
</address>
</author>
<author fullname="Ramon Casellas" initials="R." role="editor" surname="Casellas">
<organization>CTTC</organization>
<address>
<postal>
<street>Av. Carl Friedrich Gauss n.7</street>
<city>Castelldefels</city>
<region></region>
<code>Barcelona</code>
<country>Spain</country>
</postal>
<phone>+34 93 645 29 00</phone>
<email>ramon.casellas@cttc.es</email>
</address>
</author>
<author fullname="Fatai Zhang" initials="F." surname="Zhang">
<organization>Huawei</organization>
<address>
<postal>
<street>Huawei Base, Bantian, Longgang District</street>
<city>Shenzhen</city>
<region></region>
<code>518129</code>
<country>China</country>
</postal>
<phone>+86-755-28972912</phone>
<email>zhangfatai@huawei.com</email>
</address>
</author>
<author fullname="Xihua Fu" initials="X" surname="Fu">
<organization>ZTE</organization>
<address>
<postal>
<street>Ruanjian Avenue</street>
<city>Nanjing</city>
<region></region>
<code></code>
<country>China</country>
</postal>
<email>fu.xihua@zte.com.cn</email>
</address>
</author>
<author fullname="Daniele Ceccarelli" initials="D." surname="Ceccarelli">
<organization>Ericsson</organization>
<address>
<postal>
<street>Via Calda 5</street>
<city>Genova</city>
<region></region>
<code></code>
<country>Italy</country>
</postal>
<phone>+39 010 600 2512</phone>
<email>daniele.ceccarelli@ericsson.com</email>
</address>
</author>
<author fullname="Iftekhar Hussain" initials="I." surname="Hussain">
<organization>Infinera</organization>
<address>
<postal>
<street>140 Caspian Ct.</street>
<city>Sunnyvale</city>
<region></region>
<code>94089</code>
<country>USA</country>
</postal>
<phone>408-572-5233</phone>
<email> ihussain@infinera.com</email>
</address>
</author>
<!-- date day="24" month="April" year="2012" or autocompleted -->
<date year="2012" />
<area>Routing</area>
<workgroup>Network Working Group</workgroup>
<keyword>DWDM</keyword>
<keyword>flexi-grid</keyword>
<keyword>GMPLS</keyword>
<abstract>
<t>This document defines a framework and the associated control plane
requirements for the GMPLS based control of flexi-grid DWDM networks.
To allow efficient allocation of optical spectral bandwidth for high
bit-rate systems, the International Telecommunication Union
Telecommunication Standardization Sector (ITU-T) is extending the
recommendations <xref target="G.694.1"/> and <xref target="G.872"/> to
include the concept of flexible grid: a new DWDM grid has been
developed within the ITU-T Study Group 15, by defining a set of nominal
central frequencies, smaller channel spacings and the concept of
"frequency slot". In such environment, a data plane connection is
switched based on allocated, variable-sized frequency ranges within
the ptical spectrum.</t>
</abstract>
</front>
<middle>
<!-- ===================================================================
Requirements Language
=================================================================== -->
<section title ="Requirements Language">
<t> The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in <xref target="RFC2119"/>.
</t>
</section>
<!-- ===================================================================
Introduction
=================================================================== -->
<section title="Introduction">
<t>The term "Flexible grid" (flexi-grid for short) as defined by the
International Telecommunication Union Telecommunication Standardization
Sector (ITU-T) study group 15 in the latest version of <xref
target="G.694.1"/>, refers to the updated set of nominal central
frequencies (a frequency grid), channel spacings and optical spectrum
management/allocation considerations that have been defined in order to
allow an efficient and flexible allocation and configuration of optical
spectral bandwidth for high bit-rate systems.</t>
<t>A key concept of flexi-grid is the "frequency slot"; a variable-sized
optical frequency range that can be allocated to a data connection. As
detailed later in the document, a frequency slot is characterized by its
nominal central frequency and its slot width which, as per <xref
target="G.694.1"/>, is constrained to be a multiple of a given slot
width granularity.</t>
<t>Compared to a traditional fixed grid network, which uses fixed size
optical spectrum frequency ranges or "frequency slots" with typical
channel separations of 50 GHz, a flexible grid network can select
its media channels with a more flexible choice of slot widths,
allocating as much optical spectrum as required, and allowing higher
bit rates (e.g., 400G, 1T or higher). </t>
<t>From a networking perspective, a flexible grid network is assumed to be
a layered network <xref target="G.872"/><xref target="G.800"/> in which
the flexi-grid layer (also referred to as the media layer) is the server
layer and the OCh Layer (also referred to as the signal layer) is the
client layer. In the media layer, switching is based on a frequency
slot, and the size of a media channel is given by the properties of the
associated frequency slot. In this layered network, the media channel
itself can be dimensioned to contain one or more Optical Channels.</t>
<t>As described in <xref target="RFC3945"/>, GMPLS extends MPLS from
supporting only Packet Switching Capable (PSC) interfaces and switching
to also support four new classes of interfaces and switching that include
Lambda Switch Capable (LSC).</t>
<t>A Wavelength Switched Optical Network (WSON), addressed in <xref
target="RFC6163"/>, is a term commonly used to refer to the
application/deployment of a Generalized Multi-Protocol Label Switching
(GMPLS)-based control plane for the control (provisioning/recovery, etc)
of a fixed grid WDM network. [editors' note: we need to think of the
relationship of WSON and OCh switching. Are they equivalent? WSON
includes regeneration, OCh does not? decoupling of lambda/OCh/OCC]</t>
<t>This document defines the framework for a GMPLS-based control of
flexi-grid enabled DWDM networks (in the scope defined by ITU-T layered Optical
Transport Networks <xref target="G.872"/>, as well as a set of associated
control plane requirements. An important design consideration relates to the
decoupling of the management of the optical spectrum resource and the client
signals to be transported. [Editor's note: a point was raised during the
meeting that WSON has not made the separation between Och and Lambda (spectrum and
signal are bundled)]. </t>
<t>[Editors' note: this document will track changes and evolutions of <xref
target="G.694.1"/> <xref target="G.872"/> documents until their final
publication. This document is not expected to become RFC until then.]
</t>
<t>[Editor's note: -00 as agreed during IETF83, the consideration of the
concepts of Super-channel (a collection of one or more frequency slots to
be treated as unified entity for management and control plane) and
consequently Contiguous Spectrum Super-channel (a super-channel with a
single frequency slot) and Split-Spectrum super-channel (a super-channel
with multiple frequency slots) is postponed until the ITU-T data plane
includes such physical layer entities, e.g., an ITU-T contribution
exists. ITU-T is still discussing B100G Architecture]</t>
<t>[Editors' note: -01 this version reflects the agreements made during
IETF84, notably concerning the focus in the media layer, terminology
updates post ITU-T September meeting in Geneva and the deprecation of
the ROADM term, in favor of the more concrete media layer switching
element (media channel matrix).] </t>
<t>[Editors' note: -01 in partial answer to Gert question on the layered
model, <xref target="G.872"/> footnote explains that this separation
is necessary to allow the description of media elements that may act
on more than a single OCh-P signal. See appendix IV within.]</t>
</section>
<!-- ===================================================================
Acronyms
=================================================================== -->
<section title="Acronyms">
<t>FS: Frequency Slot</t>
<t>NCF: Nominal Central Frequency</t>
<t>OCh: Optical Channel</t>
<t>OCh-P: Optical Channel Payload</t>
<t>OCh-O: Optical Channel Overhead</t>
<t>OCC: Optical Channel Carrier</t>
<t>SWG: Slot Width Granularity</t>
</section>
<!-- ===================================================================
Terminology
=================================================================== -->
<section title="Terminology">
<t>The following is a list of terms (see <xref target="G.694.1"/> and <xref
target="G.872"/>) reproduced here for completeness. [Editors' note:
regarding wavebands, we agreed NOT to use the term in flexigrid. The term
has been used inconsistently in fixed-grid networks and overlaps with the
definition of frequency slot. If need be, a question will be sent to
ITU-T asking for clarification regarding wavebands.]</t>
<t>Where appropriate, this documents also uses terminolgy and lexicography from
<xref target="RFC4397"/>.</t>
<t>[Editors' note: *important* these terms are not yet final and they
may change / be replaced or obsoleted at any time.]</t>
<section title="Frequency Slots">
<t>
<list style="symbols">
<!--
<t>Optical Channel Slot (definition in the scope of a fixed grid DWDM
network, to be adapted to a flexi-grid). The optical spectrum
frequency range (portion of optical spectrum) allocated / occupied by
a single optical channel. Each optical channel signal has a defined
carrier central frequency and required frequency slot width (the
supported optical channel signal bandwidth plus source stability).
Optical Channel slots within an optical multiplex section may be
allocated (in-service) or may be unallocated (out-of-service). An
in-service Optical Channel Slot may be carrying an Optical Channel
Signal or not. Optical Channel Slots are switched in an Optical
Channel Matrix.</t>
-->
<t>Nominal Central Frequency Granularity: 6.25 GHz (note: sometimes
referred to as 0.00625 THz).</t>
<t>Nominal Central Frequency: each of the allowed frequencies as per the
definition of flexible DWDM grid in <xref target="G.694.1"/>. The
set of nominal central frequencies can be built using the following
expression f = 193.1 THz + n x 0.00625 THz, where 193.1 THz is ITU-T
''anchor frequency'' for transmission over the C band, n is a
positive or negative integer including 0.
<figure anchor="anchor_frequency" title="Anchor frequency and set of nominal central frequencies">
<artwork>
<![CDATA[
-5 -4 -3 -2 -1 0 1 2 3 4 5 <- values of n
...+--+--+--+--+--+--+--+--+--+--+-
^
193.1 THz <- anchor frequency
]]>
</artwork>
</figure>
</t>
<t>Slot Width Granularity: 12.5 GHz, as defined in <xref
target="G.694.1"/>.</t>
<t>Slot Width: The slot width determines the "amount" of optical
spectrum regardless of its actual "position" in the frequency axis. A
slot width is constrained to be m x SWG (that is, m x 12.5 GHz),
where m is an integer greater than or equal to 1.</t>
<t>Frequency Slot: The frequency range allocated to a slot within the
flexible grid and unavailable to other slots. A frequency slot is
defined by its nominal central frequency and its slot width.
Assuming a fixed and known central nominal frequency granularity, and
assuming a fixed and known slot width granularity, a frequency slot
is fully characterized by the values of 'n' and 'm'. Note that an
equivalent characterization of a frequency slot is given by the start
and end frequencies (i.e., a frequency range) which can, in turn, be
defined by their respective values of 'n'.
<!--
Note that a bidirectional optical transmission section layer network
connection may be supported by one optical fiber for both directions
(single fiber), or each direction of the connection may be supported
by different fibers (pair of fibers). Since a frequency slot is a
unidirectional entity (the same nominal central frequency cannot be
used in two directions of transmission), the single fiber case is
carried out by a pair of unidirectional frequency slots on the same
fiber, and the pair of fibers case may have frequency slots that use
the same nominal central frequencies.
-->
<figure anchor="example_frequency_slots" title="Example Frequency slots">
<artwork>
<![CDATA[
Frequency Slot 1 Frequency Slot 2
------------- -------------------
| | | |
-3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11
..--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--...
------------- -------------------
^ ^
Central F = 193.1THz Central F = 193.14375 THz
Slot width = 25 GHz Slot width = 37.5 GHz
]]>
</artwork>
</figure>
The symbol '+' represents the allowed nominal central frequencies,
the '--' represents the nominal central frequency granularity, and
the '^' represents the slot nominal central frequency. The number on
the top of the '+' symbol represents the 'n' in the frequency
calculation formula. The nominal central frequency is 193.1 THz when
n equals zero. Note that over a single frequency slot, one or
multiple Optical Channels may be transported.
Note that when there are multiple optical signals within frequency
slot, then each signal still has its own central frequency. That is,
the term "central frequency" applies to an Optical signal and the
term "nominal central frequency" applies to a frequency slot. In
other words, the Frequency Slot central frequency is independent of
the signals central frequencies.</t>
<t>Effective Frequency Slot: the effective frequency slot of a media
channel is the common part of the frequency slots of the filter
components along the media channel through a particular path through
the optical network. It is a logical construct derived from the
(intersection of) frequency slots allocated to each device in the
path. The effective frequency slot is an attribute of a media
channel and, being a frequencly slot, it is described by its
nominal central frequency and slot width.
As an example, if there are two filters having slots with the same n
but different m, then the common frequency slot has the smaller of
the two m values. [Editor's note: within the GMPLS label swapping
paradigm, the switched resource corresponds to the local frequency
slot defined by the observable filters of the media layer switching
element. The GMPLS label MUST identify the switched resource locally,
and (as agreed during IETF84) is locally scoped to a link, even if
the same frequency slot is allocated at all the hops of the path.
Note that the requested slot width and the finally allocated slot
witdh by a given node may be different, e.g., due to restrictions in
the slot width granularity of the nodes. Due to the symmetric
definition of frequency slot, allocations seem to be constrained to
have the same nominal central frequency. It is important to note that
if n changes along the path, it cannot be guaranteed that there is a
valid common frequency slot. We must determine if different n's are
allowed. We need to explain this rationale. e.g. what happens when
the resulting slot cannot be characterized with n and m, see
<xref target="effective_frequency_slot"/> and <xref target="invalid_effective_frequency_slot"/>.].
<figure anchor="effective_frequency_slot" title="Effective Frequency Slot">
<artwork>
<![CDATA[
Frequency Slot 1
-------------
| |
-3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11
..--+--+--+--+--X--+--+--+--+--+--+--+--+--+--+--+--...
Frequency Slot 2
-------------------
| |
-3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11
..--+--+--+--+--X--+--+--+--+--+--+--+--+--+--+--+--...
===============================================
Effective Frequency Slot
-------------
| |
-3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11
..--+--+--+--+--X--+--+--+--+--+--+--+--+--+--+--+--...
]]>
</artwork>
</figure>
<figure anchor="invalid_effective_frequency_slot" title="Invalid Effective Frequency Slot">
<artwork>
<![CDATA[
Frequency Slot 1
-------------
| |
-3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11
..--+--+--X--+--+--+--+--+--+--+--+--+--+--+--+--+--...
Frequency Slot 2
-------------------
| |
-3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11
..--+--+--+--+--X--+--+--+--+--+--+--+--+--+--+--+--...
===============================================
Invalid Effective Frequency Slot - (n, m?)
----------
| |
-3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11
..--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--...
]]>
</artwork>
</figure>
</t>
</list>
</t>
</section>
<section title="Media Layer, Elements and Channels">
<t>
<list style="symbols">
<t>Media Element: a media element only directs the optical signal or
affects the properties of an optical signal, it does not modify the
properties of the information that has been modulated to produce the
optical signal. Examples of media elements include fibers,
amplifiers, filters, switching matrices[Note: the data plane
component of a LSR in the media layer is a media element, but not all
media elements correspond to data plane nodes in the GMPLS network
model.</t>
<t>Media Channel: a media association that represents both the
topology (i.e., path through the media) and the resource (frequency
slot) that it occupies. As a topological construct, it represents a
(effective) frequency slot supported by a concatenation of media
elements (fibers, amplifiers, filters, switching matrices...). This
term is used to identify the end-to-end physical layer entity with
its corresponding (one or more) frequency slots local at each link
filters.</t>
<t>Network Media Channel: a media channel (media association) that
supports a single OCh-P network connection. It represents the
concatenation of all media elements between an OCh-P source and an
OCh-P sink. [TODO: |Malcolm| explain the use case rationale to
support a hierarchy of media channels, where a media channel acts as
"pipe" for one or more network media channels and they are both
separate entities (IETF84). This may be tied to the concept of a
"waveband" or express channel, as stated in <xref target="G.872"/>
footnote 4.]</t>
<t>OCh-P Frequency Slot: The spectrum allocated to a single OCh signal
supported on a Network Media Channel. </t>
</list>
</t>
</section>
<section title="Media Layer Switching">
<t> [Editors' note: we are not discarding O/E/O. If defined in a ITU-T
network reference model with trail/terminations, considering optical
channels i.e. with well-defined interfaces, reference points, and
architectures. The implications of O/E/O will be also addressed once we
have another context that includes them. In OTN from an OCh point of view
end to end means from transponder to transponder, so if there is a 3R
from ingress to egress there are 2 OCh which can have different 'n' and
'm'].
<list style="symbols">
<t>Media Channel Matrixes: the media channel matrix provides flexible
connectivity for the media channels. That is, it represents a point
of flexibility where relationships between the media ports at the
edge of a media channel matrix may be created and broken. The
relationship between these ports is called a matrix channel.
(Network) Media Channels are switched in a Media Channel
Matrix.</t>
</list>
</t>
<t>In summary, the concept of frequency slot is a logical abstraction that
represents a frequency range while the media layer represents the
underlying media support. Media Channels are media associations,
characterized by their (effective) frequency slot, respectively; and
media channels are switched in media channel matrixes. In <xref target="media_channel_example"/>
, a Media Channel has been configured and dimensioned to support two
OCh-P, each transported in its own OCh-P frequency slot.
<figure anchor="media_channel_example" title="Example of Media Channel / Network Media Channels and associated frequency slots">
<artwork>
<![CDATA[
Media Channel Frequency Slot
+-------------------------------X------------------------------+
| |
| OCh-P Frequency Slot OCh-P Frequency Slot |
| +------------X-----------+ +----------X-----------+ |
| | OCh-P | | OCh-P | |
| | o | | o | |
| | | | | | | |
-4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 11 12
... +---+---+---+---+---+---+---+---+---+---+---+--+---+---+---+---+---...
... <- Network Media Channel-> <- Network Media Channel->
... <------------------------ Media Channel ----------------------->
X - Frequency Slot Central Frequency
o - signal central frequency
]]>
</artwork>
</figure>
</t>
</section>
<section title="Control Plane Terms">
<t>The following terms are defined in the scope of a GMPLS control plane.
[Editors' note: the following ones were *not* agreed during IETF83 but are
put here to be discussed.]
<list style="symbols">
<t>SSON: Spectrum-Switched Optical Network. An optical network in which
a LSP is switched based on an frequency slot of a variable slot width
of a media channel, rather than based on a fixed grid and fixed slot
width. Please note that a Wavelength Switched Optical Network (WSON)
can be seen as a particular case of SSON in which all slot widths are
equal and depend on the used channel spacing. </t>
<t>Flexi-LSP: a control plane construct that represents a data plane
connection in which the switching involves a frequency slot with
variable slot width. Different Flexi-LSPs may have different slot
widths. The term Flexi-LSP is used when needed to differentiate from
regular WSON LSP in which switching is based on a nominal wavelength.
</t>
<t>RSA: Routing and Spectrum Assignment. As opposed to the typical
Routing and Wavelength Assignment (RWA) problem of traditional WDM
networks, the flexibility in SSON leads to spectral contiguous
constraint, which means that when assigning the spectral resources to
single connections, the resources assigned to them must be contiguous
over the entire connections in the spectrum domain. </t>
</list>
</t>
</section>
</section>
<!-- ===================================================================
GMPLS applicability
=================================================================== -->
<section title="GMPLS applicability">
<t>The GMPLS control of the media layer deals with the establishment of
media channels, which are switched in media channel matrixes. GMPLS
labels locally represent the media channel and its associated frequency
slot.</t>
<t>[Editors'note: As agreed during IETF84, current focus is on the media
layer. Preliminaty agreement on the "m" parameter should appear in the
label *and* the traffic parameters.]</t>
</section>
<!-- ===================================================================
Network element models
=================================================================== -->
<section title="DWDM flexi-grid enabled network element models">
<t>Similar to fixed grid networks, a flexible grid network is also
constructed from subsystems that include Wavelength Division Multiplexing
(WDM) links, tunable transmitters and receivers, i.e, media elements
including media layer switching elements (media matrices), as well as
electro-optical network elements, all of them with flexible grid
characteristics.</t>
<t>[Editors' Note: In the scope of this document, and despite is informal
use, the term Reconfigurable Optical Add / Drop Multiplexer, (ROADM) is
avoided, in favor on media matrix. This avoid ambiguity. A ROADM can be
implemented in terms on media matrices. Informationally, this document
may provide an appendix on possible implementations of flexi-ROADMs in
terms of media layer switching elements or matrices. XF: Whether ROADM is
used or not doesn't matter with GMPLS Control Plane. I suggest to delete
this statement. We may check G.798. Likewise, modeling of filters is out
of scope of the current document IETF84, and is also considered
implementation specific.]</t>
<t>As stated in <xref target="G.694.1"/> the flexible DWDM grid defined in
Clause 7 has a nominal central frequency granularity of 6.25 GHz and a
slot width granularity of 12.5 GHz. However, devices or applications that
make use of the flexible grid may not be capable of supporting every
possible slot width or position. In other words, applications may be
defined where only a subset of the possible slot widths and positions are
required to be supported. For example, an application could be defined
where the nominal central frequency granularity is 12.5 GHz (by only
requiring values of n that are even) and that only requires slot widths
as a multiple of 25 GHz (by only requiring values of m that are
even).</t>
<section title="Network element constraints">
<t>[TODO: section needs to be rewritten, remove redundancy].</t>
<t> Optical transmitters/receivers may have different tunability
constraints, and media channel matrixes may have switching
restrictions. Additionally, a key feature of their implementation is
their highly asymmetric switching capability which is described in
<xref target="RFC6163"/> in detail. Media matrices include line side
ports which are connected to DWDM links and tributary side input/output
ports which can be connected to transmitters/receivers.</t>
<t>A set of common constraints can be defined :
<list style="symbols">
<t>Available central frequencies: The set of central frequencies
which can be used by an optical transmitter/receiver.</t>
<t>Slot width: The slot width needed by a transmitter/receiver. The
slot width is dependent on bit rate and modulation format. For one
specific transmitter, the bit rate and modulation format may be
tunable, so slot width would be determined by the modulation format
used at a given bit rate. </t>
<t>The minimum and maximum slot width.</t>
<t>Granularity: the optical hardware may not be able to select
parameters with the lowest granularityy (e.g. 6.25 GHz for nominal
central frequencies or 12.5 GHz for slot width granularity).</t>
<t>Available frequency ranges: the set or union of frequency ranges
that are not allocated (i.e. available). The relative grouping and
distribution of available frequency ranges in a fiber is usually
referred to as ''fragmentation''. </t>
<t>Available slot width ranges: the set or union of slot width ranges
supported by media matrices. It includes the following information.
<list style="symbols">
<t>Slot width threshold: the minimum and maximum Slot Width supported
by the media matrix. For example, the slot width can be from 50GHz to
200GHz.</t>
<t>Step granularity: the minimum step by which the optical filter
bandwidth of the media matrix can be increased or decreased. This parameter is
typically equal to slot width granularity (i.e. 12.5GHz) or integer
multiples of 12.5GHz.</t>
</list>
</t>
</list>
</t>
<t>[Editor's note: different configurations such as C/CD/CDC will be
added later. This section should state specifics to media channel
matrices, ROADM models need to be moved to an appendix].
</t>
</section>
</section>
<!-- ===================================================================
Layered model
=================================================================== -->
<section title="Layered Network Model">
<t>[Editors' note: OTN hierarchy is not fully covered. It is important to
understand, where the FSC sits in the OTN hierarchy. This is also
important from control plane perspective as this layer becomes the
connection end points of optical layer service]. OCh / flexi-grid layered
model.
<figure anchor="layered_network_model" title="Layered Network Model G.805">
<artwork><![CDATA[
OCh AP Trail (OCh) OCh AP
O- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - O
| |
--- OCh-P OCh-P ---
\ / source sink \ /
+ +
| OCh-P OCh-P Network Connection OCh-P |
O TCP - - - - - - - - - - - - - - - - - - - - - - - - - - - - -TCP O
| |
|Channel Port Network Media Channel Channel Port |
O - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - O
| |
+--------+ +-----------+ +----------+
| \ (1) | OCh-P LC | (1) | OCh-P LC | (1) / |
| \----|-----------------|-----------|-------------------|-------/ |
+--------+ Link Channel +-----------+ Link Channel +----------+
Media Channel Media Channel Media Channel
Matrix Matrix Matrix
(1) - Matrix Channel
]]></artwork>
</figure>
</t>
<t>[Editors' note: we are replicating the figure here for reference, until
the ITU-T document is official.</t>
</section>
<!-- ===================================================================
Topology View in Control Plane
=================================================================== -->
<section title="Topology view in Control Plane">
<t>[Note: the frequency slot matrix connection may interconnect one or more
frequency slot channels which in turn may carry one or more Och signals.]
<figure anchor="mrn_mln_topology_view" title="MRN/MLN topology view with TE link / FA">
<artwork>
<![CDATA[
+--------------+ +--------------+
| OCh-P | TE | OCh-P | Virtual TE
| | link | | link
| Matrix |o- - - - - - - - - - - - - o| Matrix |o- - - - - -
+--------------+ +--------------+
| +---------+ |
| | Media | |
|o------| Channel |---------o|
| |
| Matrix |
+---------+
]]>
</artwork>
</figure>
</t>
<t>A SSON (network) refers to the GMPLS control of flexi-grid enabled DWDM
optical networks and it encompasses both the signal and media layers.
The WSON also encompasses the signal and media layers but, since there is
no formal separation between OCh and OCC (1:1) this layer separation is
often not considered. A WSON is a particular case of SSON in the which
all slot widths are equal and depend on the channel spacing. In other
words, since there is only a 1:1 relationship between OCh : OCC there is
no need to have separate controlled layers, as if both layers are
collapsed into one.
<figure anchor="sson_wson_comparison" title="Table Comparison WSON/SSON ">
<artwork><![CDATA[
+=======================================+
| WSON | SSON |
+=======================================+
| OCh | OCh | Signal Layer
+------------------+--------------------+
| | Frequency Slot |
| Optical Channel | | Media Layer
| Carrier | |
+------------------+--------------------+
| 1:1 | N:1 | Relationship
| single layer | MRN/MLN | SL : ML
| network | (* see note) |
+------------------+--------------------+
]]></artwork>
</figure>
</t>
<t>Note that there is only one media layer switch matrix (one
implementation is FlexGrid ROADM) in SSON, while "signal layer LSP is
mainly for the purpose of management and control of individual optical
signal". Signal layer LSPs (OChs) with the same attributions (such as
source and destination) could be grouped into one media-layer LSP
(media channel), which has advantages in spectral efficiency
(reduce guard band between adjacent OChs in one FSC) and LSP management.
However, assuming some network elements indeed perform signal layer
switch in SSON, there must be enough guard band between adjacent OChs in
one media channel, in order to compensate filter concatenation
effect and other effects caused by signal layer switching elements. In
such condition, the separation of signal layer from media layer cannot
bring any benefit in spectral efficiency and in other aspects, but make
the network switch and control more complex. If two OChs must switch to
different ports, it is better to carry them by diferent FSCs and the
media layer switch is enough in this scenario. </t>
</section>
<!-- ===================================================================
Control plane requirements
=================================================================== -->
<section title="Control Plane Requirements">
<t>[Editor's note: The considered topology view is a layered network, in
which the media layer corresponds to the server layer (flexigrid) and
the signal layer corresponds to the client layer (Och). This data plane
modeling considers the flexigrid and the OCh as separate layers,
However, this has implications on the interop/interworking with WSON and
OCh switching. We need to manage a MRN for OCh and stitching for WSON?
In other words, a key part of the fwk is to define how can we have
MRN/MLN hierarchical relationship with Och/FS and yet stitching 1:1
between WSON and SSON? In this line: how does OCh switching and WSON
relate, actually?]</t>
<t>[Editor's note: formal requirements such as noted in the comments will
be added in a later version of the document].</t>
<t>Hierarchy spectrum management decouples media and signal, but from the
point of view of the control plane, such separation of concerns implies
the management of a MRN/MLN network. So Control Plane needs to
differentiate signal LSP and media LSP. It should also need to support
Hierarchy-LSP <xref target="RFC4206"/> The central frequency of each hop
should be same along end-to-end media or signal LSP because of Spectrum
Continuity Constraint. Otherwise some nodes need to convert the central
frequency along media or signal LSP.</t>
<section title="Neighbor Discovery and Link Property Correlation">
<t>[Editors' note: text from draft-li-ccamp-grid-property-lmp-01]</t>
<t>Potential interworking problems between fixed-grid DWDM and
flexible-grid DWDM nodes, may appear. Additionally, even two
flexible-grid optical nodes may have different grid properties, leading
to link property conflict.</t>
<t>Devices or applications that make use of the flexible-grid may not be
able to support every possible slot width. In other words,
applications may be defined where different grid granularity can be
supported. Taking node F as an example, an application could be
defined where the nominal central frequency granularity is 12.5 GHz
requiring slot widths being multiple of 25 GHz. Therefore the link
between two optical nodes with different grid granularity must be
configured to align with the larger of both granularities. Besides,
different nodes may have different slot width tuning ranges.</t>
<t>In summary, in a DWDM Link between two nodes, at least the following properties
should be negotiated:
<list>
<t>Grid capability (channel spacing) - Between fixed-grid and
flexible-grid nodes.</t>
<t>Grid granularity - Between two flexible-grid nodes.</t>
<t>Slot width tuning range - Between two flexible-grid nodes.</t>
</list>
</t>
</section>
<section title="Path Computation / Routing and Spectrum Assignment (RSA)">
<t> Much like in WSON, in which if there is no (available) wavelength
converters in an optical network, an LSP is subject to the ''wavelength
continuity constraint'' (see section 4 of <xref target="RFC6163"/>), if
the capability of shifting or converting an allocated frequency slot, the
LSP is subject to the Optical ''Spectrum Continuity Constraint''.</t>
<t>Because of the limited availability of wavelength/spectrum converters
(sparse translucent optical network) the wavelength/spectrum continuity
constraint should always be considered. When available, information
regarding spectrum conversion capabilities at the optical nodes may be
used by RSA mechanisms.</t>
<t>The RSA process determines a route and frequency slot for a LSP.
Hence, when a route is computed the spectrum assignment process (SA)
should determine the central frequency and slot width based on the slot
width and available central frequencies information of the transmitter
and receiver, and the available frequency ranges information and
available slot width ranges of the links that the route traverses.</t>
<section title="Architectural Approaches to RSA">
<t>Similar to RWA for fixed grids, different ways of performing RSA in
conjunction with the control plane can be considered. The approaches
included in this document are provided for reference purposes only;
other possible options could also be deployed. </t>
<section title="Combined RSA (R&SA)">
<t>In this case, a computation entity performs both routing and
frequency slot assignment. The computation entity should have the
detailed network information, e.g. connectivity topology constructed
by nodes/links information, available frequency ranges on each link,
node capabilities, etc. </t>
<t>The computation entity could reside either on a PCE or the
ingress node.</t>
</section>
<section title="Separated RSA (R+SA)">
<t>In this case, routing computation and frequency slot assignment
are performed by different entities. The first entity computes the
routes and provides them to the second entity; the second entity
assigns the frequency slot.</t>
<t>The first entity should get the connectivity topology to compute
the proper routes; the second entity should get the available
frequency ranges of the links and nodes' capabilities information to
assign the spectrum.</t>
</section>
<section title=" Routing and Distributed SA (R+DSA)">
<t>In this case, one entity computes the route but the frequency slot
assignment is performed hop-by-hop in a distributed way along the
route. The available central frequencies which meet the spectrum
continuity constraint should be collected hop by hop along the route.
This procedure can be implemented by the GMPLS signaling protocol.</t>
</section>
</section>
</section>
<section title="Routing / Topology dissemination">
<t>In the case of combined RSA architecture, the computation
entity needs to get the detailed network information, i.e. connectivity
topology, node capabilities and available frequency ranges of the
links. Route computation is performed based on the connectivity
topology and node capabilities; spectrum assignment is performed based
on the available frequency ranges of the links. The computation entity
may get the detailed network information by the GMPLS routing protocol.
Compared with <xref target="RFC6163"/>, except wavelength-specific
availability information, the connectivity topology and node
capabilities are the same as WSON, which can be advertised by GMPLS
routing protocol (refer to section 6.2 of <xref target="RFC6163"/>.
This section analyses the necessary changes on link information brought
by flexible grids.</t>
<section title="Available Frequency Ranges/slots of DWDM Links">
<t>In the case of flexible grids, channel central frequencies span from
193.1 THz towards both ends of the C band spectrum with 6.25 GHz
granularity. Different LSPs could make use of different slot widths
on the same link. Hence, the available frequency ranges should be
advertised.
</t>
</section>
<section title="Available Slot Width Ranges of DWDM Links">
<t>The available slot width ranges needs to be advertised, in
combination with the Available frequency ranges, in order to verify
whether a LSP with a given slot width can be set up or not; this is
is constrained by the available slot width ranges of the media matrix
Depending on the availability of the slot width ranges, it is
possible to allocate more spectrum than strictly needed by the
LSP.</t>
</section>
<section title="Tunable Optical Transmitters and Receivers">
<t>The slot width of a LSP is determined by the transmitter and
receiver that could be mapped to ADD/DROP interfaces in WSON.
Moreover their central frequency could be fixed or tunable, hence,
both the slot width of an ADD/DROP interface and the available
central frequencies should be advertised.</t>
</section>
<section title="Hierarchical Spectrum Management">
<t>[Editors' note: the part on the hierarchy of the optical spectrum
could be confusing, we can discuss it]. The total available spectrum
on a fiber could be described as a resource that can be divided by a
media device into a set of Frequency Slots. In terms of managing
spectrum, it is necessary to be able to speak about different
granularities of managed spectrum. For example, a part of the spectrum
could be assigned to a third party to manage. This need to partition
creates the impression that spectrum is a hierarchy in view of
Management and Control Plane. The hierarchy is created within a
management system, and it is an access right hierarchy only. It is a
management hierarchy without any actual resource hierarchy within
fiber. The end of fiber is a link end and presents a fiber port which
represents all of spectrum available on the fiber. Each spectrum
allocation appears as Link Channel Port (i.e., frequency slot port)
within fiber.
</t>
</section>
<section title="Information Model">
<t>Fixed DM grids can also be described via suitable choices of slots in
a flexible DWDM grid. However, devices or applications that make use of
the flexible grid may not be capable of supporting every possible slot
width or central frequency position. Following is the definition of
information model, not intended to limit any IGP encoding
implementation. For example, information required for routing/path
selection may be the set of available nominal central frequencies from
which a frequency slot of the required width can be allocated. A
convenient encoding for this information (may be as a frequency slot or
sets of contiguous slices) is further study in IGP encoding
document.
</t>
<t>[Editor's note: to be discussed]
<figure anchor="routing_information_model" title="Routing Information model">
<artwork><![CDATA[
<Available Spectrum in Fiber for frequency slot> ::=
<Available Frequency Range-List>
<Available Central Frequency Granularity >
<Available Slot Width Granularity>
<Minimal Slot Width>
<Maximal Slot Width>
<Available Frequency Range-List> ::=
<Available Frequency Range >[< Available Frequency Range-List>]
<Available Frequency Range >::=
<Start Spectrum Position><End Spectrum Position> |
<Sets of contiguous slices>
<Available Central Frequency Granularity> ::= n × 6.25GHz,
where n is positive integer, such as 6.25GHz, 12.5GHz, 25GHz, 50GHz
or 100GHz
<Available Slot Width Granularity> ::= m × 12.5GHz,
where m is positive integer
<Minimal Slot Width> ::= j x 12.5GHz,
j is a positive integer
<Maximal Slot Width> ::= k x 12.5GHz,
k is a positive integer (k >= j)
]]>
</artwork>
</figure>
</t>
</section>
</section>
<section title="Signaling requirements">
<t>Note on explicit label control</t>
<t>Compared with <xref target="RFC6163"/>, except identifying the
resource (i.e., fixed wavelength for WSON and frequency resource for
flexible grids), the other signaling requirements (e.g., unidirectional
or bidirectional, with or without converters) are the same as WSON
described in the section 6.1 of <xref target="RFC6163"/>. In the case
of routing and distributed SA, GMPLS signaling can be used to allocate
the frequency slot to a LSP. </t>
<t>For R+DSA, the GMPLS signaling procedure is similar to the one described in
section 4.1.3 of <xref target="RFC6163"/> except that the label set
should specify the available nominal central frequencies that meet
the slot width requirement of the LSP.</t>
<section title="Slot Width Requirement">
<t>[Editors' note: the signaling requirements need to be discussed.
This is just preliminary text]. </t>
<t>In order to allocate a proper frequency slot for a LSP, the
signaling should specify its slot width requirement. The intermediate
nodes can collect the acceptable central frequencies that meet the
slot width requirement hop by hop. The tail-end node also needs to
know the slot width of a LSP to assign the proper frequency resource.
Hence, the slot width requirement should be specified in the
signaling message when a LSP is being set up. [Note: other methods
may not need to collect availability]</t>
</section>
<section title="Frequency Slot Representation">
<t>The frequency slot can be determined by the central frequency (n
value) and slot width (m value). Such parameters should be able to be
specified by the signaling protocol.</t>
</section>
<section title="Relationship with MRN/MLN">
<section title="OCh Layer">
</section>
<section title="Media (frequency slot) layer">
</section>
</section>
</section> <!-- end signaling requirements -->
</section> <!-- end control plane requirements -->
<!-- ===================================================================
Control plane procedures
=================================================================== -->
<section title="Control Plane Procedures">
<t>FFS. Postpone procedures such as resizing existing LSP(s) without
deletion, which refers to increase or decrease of slot width value 'm'
without changing the value of 'n', etc. until requirements have been
identified. At present no hitless resizing protocol has been defined for
OCh. Hitless resizing is defined for an ODU entity only.</t>
</section>
<!-- ===================================================================
Backwards compatibility / WSON interworking
=================================================================== -->
<section title="Backwards (fixed-grid) compatibility, and WSON interworking">
<t>
<list style="symbols">
<t>SSON as evolution of WSON, same LSC, different Swcap?</t>
<t>Potential problems with having the same swcap but the label format
changes w.r.t. wson </t>
<t>A new SwCap may need to be defined, LSC swcap already defined ISCD
which can not be modified</t>
<t>Role of LSP encoding type?</t>
<t>Notion of hierarchy? There is no notion of hierarchy between WSON
and flexi-grid / SSON - only interop / interwork.</t>
</list>
</t>
<t>Arguments for LSC switching capability</t>
<t>[QW] A LSP for an optical signal which has a bandwidth of 50GHz
passes through both a fixed grid network and a flexible grid network. We
assume that no OEOs exist in the LSP, so both the fixed grid path and
flexible grid path occupy 50GHz. From the perspective of data plane, there
is no change of the signal and no multiplexing when the fixed grid path
interconnects with flexible grid path. From this scenario we can conclude
that both fixed grid network path and flexible grid network path belong to
the same layer. No notion of hierarchy exists between them.</t>
<t>[QW] stitching LSP which is described in <xref target="RFC5150"/> can
be applied in one layer. LSP hierarchy allows more than one LSP to be
mapped to an H-LSP, but in case of S-LSP, at most one LSP may be associated
with an S-LSP. This is similar to the scenario of interconnection between
fixed grid LSP and flexible grid LSP. Similar to an H-LSP, an S-LSP could
be managed and advertised, although it is not required, as a TE link,
either in the same TE domain as it was provisioned or a different one. Path
setup procedure of stitching LSP can be applied in the scenario of
interconnection between fixed grid path and flexible grid path.</t>
<figure anchor="lsp_stitching" title="LSP Stitching [RFC5150] and relationship with fixed-flexi">
<artwork><![CDATA[
e2e LSP
+++++++++++++++++++++++++++++++++++> (LSP1-2)
LSP segment (flexi-LSP)
====================> (LSP-AB)
C --- E --- G
/|\ | / |\
/ | \ | / | \
R1 ---- A \ | \ | / | / B --- R2
\| \ |/ |/
D --- F --- H
fixed grid --A-- flexi-grid --B-- fixed grid
]]></artwork>
</figure>
</section>
<!-- ===================================================================
Open Issues and Misc
=================================================================== -->
<section title="Misc & Summary of open Issues [To be removed at later versions]">
<t>
<list style="symbols">
<t>Will reuse a lot of work / procedures / encodings defined in the
context of WSON</t>
<t>At data rates of GBps / TBps, encoding bandwidths with bytes per
second unit and IEEE 32-bit floating may be problematic / non
scalable.</t>
<t>Bandwidth fields not relevant since there is not a 1-to-1 mapping
between bps and Hz, since it depends on the modulation format, fec,
either there is an agreement on assuming best / worst case
modulations and spectral efficiency.</t>
<t>Label I: "m" is inherent part of the label, part of the switching,
allows encode the "lightpath" in a ERO using Explicit Label Control,
Still maintains that feature a cross-connect is defined by the tuple
(port-in, label-in, port-out, label-out), allows a kind-of "best
effort LSP"</t>
<t>Label II: "m" is not part of the label but of the TSPEC, neds to be
in the TSPEC to decouple client signal traffic specification and
management of the optical spectrum, having in both places is
redundant and open to incoherences, extra error checking.</t>
<t>Label III: both, It reflects both the concept of resource request
allocation / reservation and the concept of being inherent part of
the switching.</t>
</list>
</t>
</section>
<!-- ===================================================================
SECURITY CONSIDERATIONS
=================================================================== -->
<section title="Security Considerations">
<t>TBD</t>
</section>
<!-- ===================================================================
CONTRIBUTING AUTHORS
=================================================================== -->
<section title="Contributing Authors">
<t>
<list>
<t>
Qilei Wang<vspace blankLines='0'/>
ZTE<vspace blankLines='0'/>
Ruanjian Avenue, Nanjing, China<vspace blankLines='0'/>
wang.qilei@zte.com.cn<vspace blankLines='0'/>
</t>
<t>
Malcolm Betts<vspace blankLines='0'/>
ZTE<vspace blankLines='0'/>
malcolm.betts@zte.com.cn<vspace blankLines='0'/>
</t>
<t>
Sergio Belotti<vspace blankLines='0'/>
Alcatel Lucent<vspace blankLines='0'/>
Optics CTO<vspace blankLines='0'/>
Via Trento 30 20059 Vimercate (Milano) Italy<vspace blankLines='0'/>
+39 039 6863033<vspace blankLines='0'/>
sergio.belotti@alcatel-lucent.com<vspace blankLines='0'/>
</t>
<t>
Cyril Margaria<vspace blankLines='0'/>
Nokia Siemens Networks<vspace blankLines='0'/>
St Martin Strasse 76, Munich, 81541, Germany<vspace blankLines='0'/>
+49 89 5159 16934<vspace blankLines='0'/>
cyril.margaria@nsn.com<vspace blankLines='0'/>
</t>
<t>
Xian Zhang<vspace blankLines='0'/>
Huawei<vspace blankLines='0'/>
zhang.xian@huawei.com<vspace blankLines='0'/>
</t>
<t>
Yao Li<vspace blankLines='0'/>
Nanjing University<vspace blankLines='0'/>
wsliguotou@hotmail.com<vspace blankLines='0'/>
</t>
<t>
Fei Zhang<vspace blankLines='0'/>
ZTE<vspace blankLines='0'/>
Zijinghua Road, Nanjing, China<vspace blankLines='0'/>
zhang.fei3@zte.com.cn<vspace blankLines='0'/>
</t>
<t>
Lei Wang<vspace blankLines='0'/>
ZTE<vspace blankLines='0'/>
East Huayuan Road, Haidian district, Beijing, China<vspace blankLines='0'/>
wang.lei131@zte.com.cn <vspace blankLines='0'/>
</t>
<t>
Guoying Zhang<vspace blankLines='0'/>
China Academy of Telecom Research<vspace blankLines='0'/>
No.52 Huayuan Bei Road, Beijing, China<vspace blankLines='0'/>
zhangguoying@ritt.cn<vspace blankLines='0'/>
</t>
<t>
Takehiro Tsuritani<vspace blankLines='0'/>
KDDI R&D Laboratories Inc.<vspace blankLines='0'/>
2-1-15 Ohara, Fujimino, Saitama, Japan<vspace blankLines='0'/>
tsuri@kddilabs.jp<vspace blankLines='0'/>
</t>
<t>
Lei Liu<vspace blankLines='0'/>
KDDI R&D Laboratories Inc.<vspace blankLines='0'/>
2-1-15 Ohara, Fujimino, Saitama, Japan<vspace blankLines='0'/>
le-liu@kddilabs.jp<vspace blankLines='0'/>
</t>
<t>
Eve Varma<vspace blankLines='0'/>
Alcatel-Lucent<vspace blankLines='0'/>
+1 732 239 7656<vspace blankLines='0'/>
eve.varma@alcatel-lucent.com<vspace blankLines='0'/>
</t>
<t>
Young Lee<vspace blankLines='0'/>
Huawei<vspace blankLines='0'/>
</t>
<t>
Jianrui Han<vspace blankLines='0'/>
Huawei<vspace blankLines='0'/>
</t>
<t>
Sharfuddin Syed<vspace blankLines='0'/>
Infinera<vspace blankLines='0'/>
</t>
<t>
Rajan Rao<vspace blankLines='0'/>
Infinera<vspace blankLines='0'/>
</t>
<t>
Marco Sosa<vspace blankLines='0'/>
Infinera<vspace blankLines='0'/>
</t>
<t>
Biao Lu<vspace blankLines='0'/>
Infinera<vspace blankLines='0'/>
</t>
<t>
Abinder Dhillon<vspace blankLines='0'/>
Infinera<vspace blankLines='0'/>
</t>
<t>
Felipe Jimenez Arribas<vspace blankLines='0'/>
Telefónica I+D<vspace blankLines='0'/>
</t>
<t>
Andrew G. Malis<vspace blankLines='0'/>
Verizon<vspace blankLines='0'/>
</t>
<t>
Adrian Farrel<vspace blankLines='0'/>
Old Dog Consulting<vspace blankLines='0'/>
</t>
<t>
Daniel King<vspace blankLines='0'/>
Old Dog Consulting<vspace blankLines='0'/>
</t>
</list>
</t>
</section>
<!-- ===================================================================
ACKNOWLEDGEMENTS
=================================================================== -->
<section title="Acknowledgments">
<t>The authors would like to thank Pete Anslow for his insights and
clarifications.</t>
</section>
</middle>
<back>
<references title="Normative References">
&RFC2119;
&RFC3945;
&RFC4206;
&RFC5150;
&RFC6163;
<reference anchor="G.800">
<front>
<title>ITU-T Recommendation G.800: Unified functional architecture of transport networks.</title>
<author> <organization abbrev="ITU-T">International Telecomunications Union</organization></author>
<date year="2012" month="February"/>
</front>
</reference>
<reference anchor="G.805">
<front>
<title>ITU-T Recommendation G.805: Generic functional architecture of transport networks.</title>
<author> <organization abbrev="ITU-T">International Telecomunications Union</organization></author>
<date year="2000" month="March"/>
</front>
</reference>
<reference anchor="G.709">
<front>
<title>ITU-T Recommendation G.709: Interfaces for the Optical Transport Network (OTN).</title>
<author> <organization abbrev="ITU-T">International Telecomunications Union</organization></author>
<date year="2009" month="March"/>
</front>
</reference>
</references>
<references title="Informative References">
&RFC4397;
<reference anchor="G.694.1">
<front>
<title>ITU-T Recommendation G.694.1, Spectral grids for WDM applications: DWDM frequency grid, draft v1.6 2011/12</title>
<author> <organization abbrev="ITU-T">International Telecomunications Union</organization></author>
<date year="2011"/>
</front>
</reference>
<reference anchor="G.872">
<front>
<title>ITU-T Recommendation G.872, Architecture of optical transport networks, draft v0.16 2012/09 (for discussion)</title>
<author><organization abbrev="ITU-T">International Telecomunications Union</organization></author>
<date year="2012"/>
</front>
</reference>
<reference anchor="WD12R2">
<front>
<title>Proposed media layer terminology for G.872</title>
<author><organization abbrev="ITU-T">International Telecomunications Union, WD12R2, Q12-SG15, ZTE, Ciena WP3</organization></author>
<date year="2012" month="05"/>
</front>
</reference>
</references>
</back>
</rfc>
| PAFTECH AB 2003-2026 | 2026-04-24 09:03:48 |