One document matched: draft-lhotka-netconf-relaxng-00.txt
NETCONF L. Lhotka
Internet-Draft CESNET
Intended status: Informational March 2, 2009
Expires: September 3, 2009
Modular RELAX NG Schema of NETCONF RPC and Protocol Operations
draft-lhotka-netconf-relaxng-00
Status of this Memo
This Internet-Draft is submitted to IETF in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on September 3, 2009.
Copyright Notice
Copyright (c) 2009 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document.
Lhotka Expires September 3, 2009 [Page 1]
Internet-Draft NETCONF Data Types March 2009
Abstract
This memo presents a schema for NETCONF RPC and protocol operations
expressed in RELAX NG (compact syntax). The schema is modular and
cleanly separates the server and client part of the NETCONF
vocabulary and also the schema extensions provided by optional
capabilities. The modular structure improves readability but also
enables selecting certain modules and assembling them into a grammar
that can be used for validation of NETCONF protocol data units.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Problems of the NETCONF XSD Schema . . . . . . . . . . . . . . 5
3. Description of the RELAX NG Schemas . . . . . . . . . . . . . 6
4. Assembling the Modules into Validation Schemas . . . . . . . . 8
5. Conclusions . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. References . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Appendix A. RELAX NG Schema Modules . . . . . . . . . . . . . . . 11
A.1. Common patterns . . . . . . . . . . . . . . . . . . . . . 11
A.2. Base Client Schema . . . . . . . . . . . . . . . . . . . . 12
A.3. Base Server Schema . . . . . . . . . . . . . . . . . . . . 14
A.4. Capability :writable-running . . . . . . . . . . . . . . . 20
A.5. Capability :candidate . . . . . . . . . . . . . . . . . . 20
A.6. Capability :confirmed-commit . . . . . . . . . . . . . . . 21
A.7. Capability :rollback-on-error . . . . . . . . . . . . . . 21
A.8. Capability :validate . . . . . . . . . . . . . . . . . . . 21
A.9. Capability :startup . . . . . . . . . . . . . . . . . . . 22
A.10. Capability :url . . . . . . . . . . . . . . . . . . . . . 22
A.11. Capability :xpath . . . . . . . . . . . . . . . . . . . . 23
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 24
Lhotka Expires September 3, 2009 [Page 2]
Internet-Draft NETCONF Data Types March 2009
1. Introduction
Specification of the NETCONF protocol [1] contains in its Appendix B
a formal definition of the vocabulary of RPC and protocol operations
expressed using the W3C XML Schema language ([2], [3] - henceforth
referred to as "XSD").
However, the NETCONF protocol vocabulary actually consists of two
distinct parts - one for the NETCONF client and the other for the
NETCONF server - that can never appear together in the same NETCONF
PDU. The overlap of these two parts is small and even if the same
element, such as <hello>, is allowed in both, the content model of
each version may differ. Moreover, the PDU contents in every
particular case depend on the capabilities supported by the server
and negotiated in the <hello> messages. The all-encompassing
approach of the NETCONF XSD schema cannot take these differences into
account and the grammar is thus in many places too liberal. As a
result, the XSD schema can hardly be used for serious validation of
NETCONF PDUs.
This report introduces a new modular schema for the same NETCONF
protocol vocabulary expressed in RELAX NG [4], a simple but powerful
schema language that became Part 2 of the international standard ISO/
IEC 19757 [5]. RELAX NG has two official syntaxes, XML and compact,
the latter, being designed primarily for human readers without
special training, is considerably more suitable for inclusion in
standardization documents such as RFCs than XML-based syntaxes.
The goal of this work is twofold:
1. Demonstrate that RELAX NG is a sound alternative to XSD for the
given purpose in that it is able to express the same (or even
more detailed) grammar and data-typing rules as the existing
NETCONF XSD schema and do it in a way that is considerably more
human-readable.
2. Use the extensibility framework of RELAX NG for dividing the
schema into smaller modules according to the logic of the NETCONF
protocol. Such a decomposition will not only further aid
readability and make the parts of the schema easier to maintain,
but also allow for using the modules directly for NETCONF PDU
validation.
The report is organized as follows: In the Section 2 we summarize the
problems of the NETCONF XSD schema, Section 3 describes the structure
and main design features of the modular RELAX NG schema, Section 4
shows how to use the modules for effective validation of NETCONF PDUs
in specific contexts and finally Section 5 concludes the reports.
Lhotka Expires September 3, 2009 [Page 3]
Internet-Draft NETCONF Data Types March 2009
Appendix A contains full listing of the RELAX NG modules in the
compact syntax.
Lhotka Expires September 3, 2009 [Page 4]
Internet-Draft NETCONF Data Types March 2009
2. Problems of the NETCONF XSD Schema
The NETCONF XSD schema in Appendix B of [1] can serve well as a set
of formalized guidelines for implementers of the NETCONF protocol,
especially the RPC layer. However, this schema is much less useful
for the second major purpose of XML schemas, namely for validating
documents, in our case NETCONF PDUs. The reason for this deficiency
is that many of the constraints in the schema are rather lax or even
logically inconsistent. The latter problem is manifested, for
example, in the <session-id> parameter of the <hello> element: the
schema declares it as optional (minOccurs="0") but, in fact, this
content model is appropriate neither for server's nor for client's
version of <hello> - it is mandatory in the former but not allowed at
all in the latter.
Similarly, the borderline case of a <rpc-reply> to an invalid <rpc>
lacking the "message-id" parameter led the schema designers to
declaring this parameter as optional. As an unfortunate result, any
<rpc-reply> with "message-id" missing will be found valid.
Strict validation of NETCONF PDUs in a particular context must also
take into account the set of capabilities supported by the concrete
server. The XSD schema is not designed to allow such specialization.
Finally, Appendix A of [1] defines the standard NETCONF errors and
specifies constraints on their contents. For example, some
combinations or "error-tag" and "error-type" parameters are not
permitted, some errors have prescribed content of "error-info" while
others cannot have this parameter, and all these standard errors have
severity "error". Again, the XSD schema doesn't take these
constraints into account and allows all possible combinations of
error parameters.
Lhotka Expires September 3, 2009 [Page 5]
Internet-Draft NETCONF Data Types March 2009
3. Description of the RELAX NG Schemas
Modular RELAX NG schema is designed for much stricter validation of
NETCONF PDUs than the XSD schema. This is achieved by utilizing
auxiliary information that is typically available, such as the
originator of the PDU - server or client - and list of capabilities
supported by the server.
The RELAX NG schema is divided into 11 modules, each of them stored
in a separate file:
o nc-base-common (Appendix A.1)
o nc-base-client (Appendix A.2)
o nc-base-server (Appendix A.3)
o nc-writable-running-client (Appendix A.4)
o nc-candidate-client (Appendix A.5)
o nc-confirmed-commit-client (Appendix A.6)
o nc-rollback-on-error-client (Appendix A.7)
o nc-validate-client (Appendix A.8)
o nc-startup-client (Appendix A.9)
o nc-url-client (Appendix A.10)
o nc-xpath-client (Appendix A.11)
The file names are composed of the module name and the appropriate
extension - either ".rng" or ".rnc", depending on whether the file
contains RELAX NG in the XML or compact syntax.
The main division line in the schema goes between the client and
server part. Hence, modules "nc-base-client" and "nc-base-server"
contain the client and server vocabulary, respectively. However,
this is only the bare-bones NETCONF, without any optional
capabilities. Few parameters and RELAX NG patterns are common to
both the client and server schemas and these are contained in the
"nc-base-common" module.
Further, extensions to the schema provided by optional capabilities
are defined in separate modules. In general, there would be two
modules per capability - one with the server and the other with the
Lhotka Expires September 3, 2009 [Page 6]
Internet-Draft NETCONF Data Types March 2009
client extensions. However, all the standard extensions defined in
[1] only affect the client vocabulary, so the server module is not
needed. Nevertheless, other capabilities may extend or change the
server vocabulary, too, for example by introducing new error types.
The schema modules are designed for maximum extensibility.
Therefore, their RELAX NG patterns mainly use the "content-oriented"
style that allows new content to be easily added without redefining
entire patterns. Due to this design, the capability modules can be
generally very short and easy to understand. However, taking the
content-oriented design to the extreme would make the schemas
unwieldy, so we use it only in places where extensions are likely.
Lhotka Expires September 3, 2009 [Page 7]
Internet-Draft NETCONF Data Types March 2009
4. Assembling the Modules into Validation Schemas
Two of the RELAX NG modules - "nc-base-client" and "nc-base-server" -
are full-fledged grammars that can be readily used for validating
NETCONF PDUs generated by the client and server, respectively. So
the following PDU (taken from [1]) will successfully validate against
the "nc-base-client" schema:
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
message-id="101">
<get-config>
<source>
<running/>
</source>
</get-config>
</rpc>
However, if we replace the <running/> element in the "source"
parameter with <startup/>, the validation fails since the optional
capabilities such as :startup are not supported by the "nc-base-
client" schema. We can allow <startup/> as the value of the "source"
parameter simply by using the following schema:
include "nc-base-client.rnc"
include "nc-startup-client.rnc"
In the same way, we can include any combination of capabilities as
long as they are not mutually exclusive.
For the server PDUs the procedure is analogical but generally simpler
since none of the standard capabilities defined in [1] affects the
server schema, so the "nc-base-server" schema is sufficient for
validating server PDUs.
Lhotka Expires September 3, 2009 [Page 8]
Internet-Draft NETCONF Data Types March 2009
5. Conclusions
The set of RELAX NG schemas presented in this report provide a
modular grammar that can be used as a formal definition and
documentation of the NETCONF vocabulary, but also for validating
NETCONF PDUs. As a validation vehicle, though, these schemas are
considerably stricter than the W3C XML Schema from [1]. This is
mainly due to the fact that each of the RELAX NG schema modules deals
with a certain specific part of the vocabulary - client or server
side of a NETCONF channel, or individual capabilities. The modules
can be assembled in many different ways into validation schemas that
may be used for effective NETCONF PDU validation.
The fact that the modular RELAX NG schema is stricter and more
validation-oriented than its XSD counterpart doesn't mean that it is
less readable. On the contrary, separating the server and client
vocabularies and factoring out the optional capabilities resulted in
base server and client schemas that are simple and easy to
comprehend. Likewise, most capability schemas are almost trivial but
still show quite precisely where and how each capability extends the
vocabulary.
The simplicity and limited scope of the schema modules also enables
their inclusion in larger validation frameworks such as DSDL [5]
and/or combination with a NETCONF concrete data model expressed in
RELAX NG or a different data modelling language.
As a matter of fact, most improvements described in this report
could, and probably should, be applied to the NETCONF XSD schema in
[1], too. The only notable exception is the compact syntax, which is
special to RELAX NG.
Lhotka Expires September 3, 2009 [Page 9]
Internet-Draft NETCONF Data Types March 2009
6. References
[1] Enns, R., Ed., "NETCONF Configuration Protocol", RFC 4741,
December 2006.
[2] Thompson, H., Ed., Beech, D., Ed., Maloney, M., Ed., and N.
Mendelsohn, Ed., "XML Schema Part 1: Structures, Second
Edition", October 2004.
[3] Biron, P., Ed. and A. Malhotra, Ed., "XML Schema Part 2:
Datatypes, Second Edition", October 2004.
[4] ISO/IEC, "Document Schema Definition Languages (DSDL) - Part 2:
Regular Grammar-Based Validation - RELAX NG", ISO/IEC 19757-2,
December 2002.
[5] ISO/IEC, "Document Schema Definition Languages (DSDL) - Part 1:
Overview", ISO/IEC 19757-1, 11 2004.
Lhotka Expires September 3, 2009 [Page 10]
Internet-Draft NETCONF Data Types March 2009
Appendix A. RELAX NG Schema Modules
This appendix contains listings of the RELAX NG modules in the
compact syntax. The modules cover the NETCONF client and server
vocabularies including all optional capabilities described in RFC
4741 [1].
A.1. Common patterns
This module defines several parameters patterns that are referenced
in both the client and server schemas.
BEGIN
# source file: nc-base-common.rng
default namespace = "urn:ietf:params:xml:ns:netconf:base:1.0"
namespace a = "http://relaxng.org/ns/compatibility/annotations/1.0"
## This pattern specifies the URI for the base NETCONF capability.
## See RFC 4741, sec. 10.1.
base-capability-uri = "urn:ietf:params:netconf:base:1.0"
hello-element = element hello { hello-content }
## Common part of the "hello" element. See RFC 4741, sec. 8.1.
hello-content =
element capabilities {
element capability { base-capability-uri }
& element capability { extra-capability-choice }*
}
## URNs of additional known capabilities
extra-capability-choice =
"urn:ietf:params:netconf:capability:writable-running:1.0"
| "urn:ietf:params:netconf:capability:candidate:1.0"
| "urn:ietf:params:netconf:capability:confirmed-commit:1.0"
| "urn:ietf:params:netconf:capability:rollback-on-error:1.0"
| "urn:ietf:params:netconf:capability:validate:1.0"
| "urn:ietf:params:netconf:capability:startup:1.0"
| xsd:anyURI {
pattern =
"urn:ietf:params:netconf:capability:url:1\.0" ~
"[?]scheme=(http|ftp|file)"
}
| "urn:ietf:params:netconf:capability:xpath:1.0"
## Attribute "message-id" is mandatory in both "rpc" and "rpc-reply".
## See RFC 4741, sec. 4.1.
Lhotka Expires September 3, 2009 [Page 11]
Internet-Draft NETCONF Data Types March 2009
message-id-attribute =
attribute message-id {
xsd:string { maxLength = "4095" }
}
## The "session-id" parameter identifies a NETCONF session.
session-id-element = element session-id { xsd:positiveInteger }
## This pattern allows arbitrary content.
arbitrary-content =
(element * { arbitrary-content }
| attribute * { text }
| text)*
## This pattern allows arbitrary content wrapped in an element.
wrapped-arbitrary-content = element * { arbitrary-content }
END
A.2. Base Client Schema
This module specifies the NETCONF client vocabulary without any
optional capabilities.
BEGIN
# source file: nc-base-client.rng
default namespace = "urn:ietf:params:xml:ns:netconf:base:1.0"
namespace a = "http://relaxng.org/ns/compatibility/annotations/1.0"
include "nc-base-common.rnc"
## Client messages may have either "hello" or "rpc" as the document
## element. "hello" is reused from netconf-common without change.
start = hello-element | rpc-element
## This element is a wrapper for all RPC requests.
## See RFC 4741, Sec. 4.1.
rpc-element =
element rpc {
message-id-attribute,
attribute * { text }*,
rpc-operation-choice
}
## Selection of RPC operations. See RFC 4741, Sec. 7.
## Capabilities may extend this pattern.
rpc-operation-choice =
Lhotka Expires September 3, 2009 [Page 12]
Internet-Draft NETCONF Data Types March 2009
element get-config { get-config-content }
| element edit-config { edit-config-content }
| element copy-config { copy-config-content }
| element delete-config { delete-config-content }
| element lock { lock-content }
| element unlock { unlock-content }
| element get { get-content }
| element close-session { close-session-content }
| element kill-session { kill-session-content }
## See RFC 4741, Sec. 7.1.
get-config-content =
element source { source-choice }
& element filter { filter-content-choice }?
## This element represents the "running" datastore.
running-element = element running { empty }
## Available repositories. Capabilities may extend this pattern.
source-choice = running-element | extra-datastore-choice
## No additional datastores are present in base NETCONF.
## Capabilities may extend this pattern. See RFC 4741, Sec. 5.1.
extra-datastore-choice = empty
## Base NETCONF only supports subtree filters.
## Capabilities may extend this pattern.
filter-content-choice =
attribute type { "subtree" }?,
subtree-filter-content
## Content of a subtree filter depends on the data model so
## we have to allow everything here.
subtree-filter-content = wrapped-arbitrary-content
## See RFC 4741, Sec. 7.2.
edit-config-content =
element target { target-choice }
& element default-operation { default-operation-choice }?
& element error-option { error-option-choice }?
& config-data-spec
## The "operation" attribute may be used inside the "config" parameter
## of edit-config. This pattern may be combined with particular data
## models into a schema validating entire "edit-config" PDUs.
edit-config-operation-attribute =
attribute operation { "merge" | "replace" | "create" | "delete" }
Lhotka Expires September 3, 2009 [Page 13]
Internet-Draft NETCONF Data Types March 2009
## Writable repositories (in base NETCONF there are none).
## Capabilities may extend this pattern.
target-choice = extra-datastore-choice
## Possible values for "default-operation" parameter in "edit-config".
## Default is "merge".
default-operation-choice = "merge" | "replace" | "none"
## Possible values for "error-option" parameter in "edit-config".
## Default is "stop-on-error".
error-option-choice = "stop-on-error" | "ignore-error"
## This pattern gives possible options for specifying configuration
## data. In base NETCONF, only inline tree is allowed.
## Capabilities may extend this pattern.
config-data-spec = element config { wrapped-arbitrary-content }
## See RFC 4741, Sec. 7.3.
copy-config-content =
element source { source-choice }
& element target { target-choice }
## See RFC 4741, Sec. 7.4.
delete-config-content = element target { extra-datastore-choice }
## See RFC 4741, Sec. 7.5.
lock-content = element target { target-choice }
## See RFC 4741, Sec. 7.6.
unlock-content = element target { target-choice }
## See RFC 4741, Sec. 7.7.
get-content = element filter { filter-content-choice }?
## See RFC 4741, Sec. 7.8.
close-session-content = empty
## See RFC 4741, Sec. 7.9.
kill-session-content = session-id-element
END
A.3. Base Server Schema
This module specifies the NETCONF server vocabulary without any
optional capabilities.
BEGIN
Lhotka Expires September 3, 2009 [Page 14]
Internet-Draft NETCONF Data Types March 2009
# source file: nc-base-server.rng
default namespace = "urn:ietf:params:xml:ns:netconf:base:1.0"
namespace a = "http://relaxng.org/ns/compatibility/annotations/1.0"
include "nc-base-common.rnc"
## Server messages may have either "hello" or "rpc-reply" as
## the document element.
start = hello-element | rpc-reply-element
## Server's "hello" message must include "session-id".
## See RFC 4741, Sec. 8.1.
hello-content &= session-id-element
## This element is a wrapper for all RPC replies.
## See RFC 4741, Sec. 4.2.
rpc-reply-element =
element rpc-reply {
attribute * { text }*,
((# Positive response
message-id-attribute,
element rpc-reply { rpc-reply-choice })
| (# error reply to a rpc without message-id is special
missing-message-id-error
| (# Negative response
message-id-attribute,
element rpc-error { rpc-error-choice }+)))
}
## Specific error reply to an "rpc" without message-id.
## Only in this case can "message-id" be missing in an "rpc-reply".
missing-message-id-error =
element rpc-error {
element error-tag { "missing-attribute" }
& element error-type { "rpc" }
& element error-severity { "error" }
& element error-info {
element bad-attribute { "message-id" }
& element bad-element { "rpc" }
}
& optional-error-content
}
## Possible RPC replies. See RFC 4741, Sec. 4.2.
## Capabilities may extend this pattern.
rpc-reply-choice = ok-element | data-element
Lhotka Expires September 3, 2009 [Page 15]
Internet-Draft NETCONF Data Types March 2009
## See RFC 4741, Sec. 4.4.
ok-element = element ok { empty }
## Content depends on data model. Here we have to allow everything.
data-element = element data { wrapped-arbitrary-content }
## These errors are defined in RFC 4741, Appendix A.
rpc-error-choice =
in-use-error-content
| too-big-error-content
| missing-attribute-error-content
| bad-attribute-error-content
| bad-attribute-error-content
| unknown-attribute-error-content
| missing-element-error-content
| bad-element-error-content
| unknown-element-error-content
| unknown-namespace-error-content
| access-denied-error-content
| lock-denied-error-content
| resource-denied-error-content
| rollback-failed-error-content
| data-exists-error-content
| data-missing-error-content
| operation-not-supported-error-content
| operation-failed-error-content
| partial-operation-error-content
error-types-pa = "protocol" | "application"
error-types-rpa = error-types-pa | "rpc"
error-types-all = error-types-rpa | "transport"
optional-error-content =
element error-app-tag { xsd:string }?
& element error-path { xsd:string }?
& element error-message {
attribute xml:lang { xsd:token }?,
xsd:string
}?
element-error-info = element bad-element { xsd:QName }
attribute-error-info =
element bad-attribute { xsd:QName }
& element-error-info
## Resource in use
in-use-error-content =
element error-tag { "in-use" }
& element error-type { error-types-pa }
& element error-severity { "error" }
& optional-error-content
Lhotka Expires September 3, 2009 [Page 16]
Internet-Draft NETCONF Data Types March 2009
## Response would be too large for the implementation
too-big-error-content =
element error-tag { "too-big" }
& element error-type { error-types-all }
& element error-severity { "error" }
& optional-error-content
## A required attribute is missing
missing-attribute-error-content =
element error-tag { "missing-attribute" }
& element error-type { error-types-rpa }
& element error-severity { "error" }
& element error-info { attribute-error-info }
& optional-error-content
## Incorrect attribute value
bad-attribute-error-content =
element error-tag { "bad-attribute" }
& element error-type { error-types-rpa }
& element error-severity { "error" }
& element error-info { attribute-error-info }
& optional-error-content
## An unexpected attribute is present
unknown-attribute-error-content =
element error-tag { "unknown-attribute" }
& element error-type { error-types-rpa }
& element error-severity { "error" }
& element error-info { attribute-error-info }
& optional-error-content
## A required element is missing
missing-element-error-content =
element error-tag { "missing-element" }
& element error-type { error-types-rpa }
& element error-severity { "error" }
& element error-info { element-error-info }
& optional-error-content
## Incorrect element value
bad-element-error-content =
element error-tag { "bad-element" }
& element error-type { error-types-rpa }
& element error-severity { "error" }
& element error-info { element-error-info }
& optional-error-content
## An unexpected element is present
Lhotka Expires September 3, 2009 [Page 17]
Internet-Draft NETCONF Data Types March 2009
unknown-element-error-content =
element error-tag { "unknown-element" }
& element error-type { error-types-rpa }
& element error-severity { "error" }
& element error-info { element-error-info }
& optional-error-content
## An unknown namespace is used
unknown-namespace-error-content =
element error-tag { "unknown-element" }
& element error-type { error-types-rpa }
& element error-severity { "error" }
& element error-info {
element-error-info
& element bad-namespace { xsd:Name }
}
& optional-error-content
## Access denied due to authorization failure
access-denied-error-content =
element error-tag { "access-denied" }
& element error-type { error-types-rpa }
& element error-severity { "error" }
& optional-error-content
## Access to the requested lock is denied
lock-denied-error-content =
element error-tag { "lock-denied" }
& element error-type { "protocol" }
& element error-severity { "error" }
& element error-info {
element session-id { xsd:nonNegativeInteger }
}
& optional-error-content
## Insufficient resources
resource-denied-error-content =
element error-tag { "resource-denied" }
& element error-type { error-types-all }
& element error-severity { "error" }
& optional-error-content
## Rollback not completed.
## Requires either :rollback-on-error or :candidate capability.
rollback-failed-error-content =
element error-tag { "rollback-failed" }
& element error-type { error-types-pa }
& element error-severity { "error" }
Lhotka Expires September 3, 2009 [Page 18]
Internet-Draft NETCONF Data Types March 2009
& optional-error-content
## Relevant data already exists
data-exists-error-content =
element error-tag { "data-exists" }
& element error-type { "application" }
& element error-severity { "error" }
& optional-error-content
## Relevant data missing
data-missing-error-content =
element error-tag { "data-missing" }
& element error-type { "application" }
& element error-severity { "error" }
& optional-error-content
## Operation not supported by the implementation
operation-not-supported-error-content =
element error-tag { "operation-not-supported" }
& element error-type { error-types-rpa }
& element error-severity { "error" }
& optional-error-content
## Requested operation failed for some reason
operation-failed-error-content =
element error-tag { "operation-failed" }
& element error-type { error-types-rpa }
& element error-severity { "error" }
& optional-error-content
## Part of the operation failed or was not attempted
partial-operation-error-content =
element error-tag { "partial-operation" }
& element error-type { "application" }
& element error-severity { "error" }
& element error-info {
element ok-element { xsd:QName }*
& element err-element { xsd:QName }*
& element noop-element { xsd:QName }*
}
& optional-error-content
END
Lhotka Expires September 3, 2009 [Page 19]
Internet-Draft NETCONF Data Types March 2009
A.4. Capability :writable-running
This module specifies the extensions to the client schema provided by
the :writable-running capability. The server schema is unchanged.
See RFC 4741 [1], Sec. 8.2.
BEGIN
# source file: nc-writable-running-client.rng
default namespace = "urn:ietf:params:xml:ns:netconf:base:1.0"
namespace a = "http://relaxng.org/ns/compatibility/annotations/1.0"
## This adds "running" as an option for the "target" parameter
## of NETCONF operations.
target-choice |= running-element
END
A.5. Capability :candidate
This module specifies the extensions to the client schema provided by
the :candidate capability. The server schema is unchanged. See RFC
4741 [1], Sec. 8.3.
BEGIN
# source file: nc-candidate-client.rng
default namespace = "urn:ietf:params:xml:ns:netconf:base:1.0"
namespace a = "http://relaxng.org/ns/compatibility/annotations/1.0"
## This adds "candidate" as an option for both "source" and "target"
## parameter of NETCONF operations.
extra-datastore-choice |= element candidate { empty }
## Two new RPC operations are added.
rpc-operation-choice |=
element commit { commit-content }
| element discard-changes { discard-changes-content }
## See RFC 4741, Sec. 8.3.4.1.
commit-content = empty
## See RFC 4741, Sec. 8.3.4.2.
discard-changes-content = empty
END
Lhotka Expires September 3, 2009 [Page 20]
Internet-Draft NETCONF Data Types March 2009
A.6. Capability :confirmed-commit
This module specifies the extensions to the client schema provided by
the :confirmed-commit capability. The server schema is unchanged.
See RFC 4741 [1], Sec. 8.4.
BEGIN
# source file: nc-confirmed-commit-client.rng
default namespace = "urn:ietf:params:xml:ns:netconf:base:1.0"
namespace a = "http://relaxng.org/ns/compatibility/annotations/1.0"
## The "confirm-timeout" parameter is given in seconds.
## The default is 600. See RFC 4741, Sec. 8.4.5.1.
commit-content &=
(element confirmed { empty }
& element confirm-timeout { xsd:positiveInteger }?)?
END
A.7. Capability :rollback-on-error
This module specifies the extensions to the client schema provided by
the :rollback-on-error capability. The server schema is unchanged.
See RFC 4741 [1], Sec. 8.5.
BEGIN
# source file: nc-rollback-on-error-client.rng
default namespace = "urn:ietf:params:xml:ns:netconf:base:1.0"
namespace a = "http://relaxng.org/ns/compatibility/annotations/1.0"
error-option-choice |= "rollback-on-error"
END
A.8. Capability :validate
This module specifies the extensions to the client schema provided by
the :validate capability. The server schema is unchanged. See RFC
4741 [1], Sec. 8.6.
Lhotka Expires September 3, 2009 [Page 21]
Internet-Draft NETCONF Data Types March 2009
BEGIN
# source file: nc-validate-client.rng
default namespace = "urn:ietf:params:xml:ns:netconf:base:1.0"
namespace a = "http://relaxng.org/ns/compatibility/annotations/1.0"
rpc-operation-choice |= element validate { validate-content }
## See RFC 4741, Sec. 8.6.4.1.
validate-content = element source { source-choice | config-data-spec }
END
A.9. Capability :startup
This module specifies the extensions to the client schema provided by
the :startup capability. The server schema is unchanged. See RFC
4741 [1], Sec. 8.7.
BEGIN
# source file: nc-startup-client.rng
default namespace = "urn:ietf:params:xml:ns:netconf:base:1.0"
namespace a = "http://relaxng.org/ns/compatibility/annotations/1.0"
## This adds "startup" as an option for both "source" and "target"
## parameter of NETCONF operations.
extra-datastore-choice |= element startup { empty }
END
A.10. Capability :url
This module specifies the extensions to the client schema provided by
the :url capability. The server schema is unchanged. See RFC 4741
[1], Sec. 8.8.
BEGIN
# source file: nc-url-client.rng
default namespace = "urn:ietf:params:xml:ns:netconf:base:1.0"
namespace a = "http://relaxng.org/ns/compatibility/annotations/1.0"
source-choice |= element url { xsd:anyURI }
target-choice |= element url { xsd:anyURI }
END
Lhotka Expires September 3, 2009 [Page 22]
Internet-Draft NETCONF Data Types March 2009
A.11. Capability :xpath
This module specifies the extensions to the client schema provided by
the :xpath capability. The server schema is unchanged. See RFC 4741
[1], Sec. 8.9.
BEGIN
# source file: nc-xpath-client.rng
default namespace = "urn:ietf:params:xml:ns:netconf:base:1.0"
namespace a = "http://relaxng.org/ns/compatibility/annotations/1.0"
filter-content-choice |=
attribute type { "xpath" },
attribute select { xsd:string }
END
Lhotka Expires September 3, 2009 [Page 23]
Internet-Draft NETCONF Data Types March 2009
Author's Address
Ladislav Lhotka
CESNET
Zikova 4
Praha 6 160 00
CZ
Email: lhotka@cesnet.cz
Lhotka Expires September 3, 2009 [Page 24]
| PAFTECH AB 2003-2026 | 2026-04-23 09:58:33 |