One document matched: draft-irtf-dtnrg-bundle-security-19.xml
<?xml version="1.0" encoding="US-ASCII"?>
<?rfc toc="yes"?>
<?rfc tocdepth="2"?>
<?rfc comments="yes"?>
<?rfc sortrefs="yes"?>
<?rfc symrefs="yes" ?>
<!DOCTYPE rfc SYSTEM "rfc2629.dtd">
<rfc category="exp" docName="draft-irtf-dtnrg-bundle-security-19"
ipr="pre5378Trust200902">
<front>
<title abbrev="Bundle Security Protocol">Bundle Security Protocol
Specification</title>
<author fullname="Susan Flynn Symington" initials="S.F."
surname="Symington">
<organization>The MITRE Corporation</organization>
<address>
<postal>
<street>7515 Colshire Drive</street>
<city>McLean</city>
<region>VA</region>
<code>22102</code>
<country>US</country>
</postal>
<phone>+1 (703) 983-7209</phone>
<email>susan@mitre.org</email>
<uri>http://mitre.org/</uri>
</address>
</author>
<author fullname="Stephen Farrell" initials="S." surname="Farrell">
<organization>Trinity College Dublin</organization>
<address>
<postal>
<street>Distributed Systems Group</street>
<street>Department of Computer Science</street>
<street>Trinity College</street>
<city>Dublin</city>
<code>2</code>
<country>Ireland</country>
</postal>
<phone>+353-1-608-1539</phone>
<email>stephen.farrell@cs.tcd.ie</email>
</address>
</author>
<author fullname="Howard Weiss" initials="H." surname="Weiss">
<organization>SPARTA, Inc.</organization>
<address>
<postal>
<street>7110 Samuel Morse Drive</street>
<city>Columbia</city>
<region>MD</region>
<code>21046</code>
<country>US</country>
</postal>
<phone>+1-443-430-8089</phone>
<email>howard.weiss@sparta.com</email>
</address>
</author>
<author fullname="Peter Lovell" initials="P." surname="Lovell">
<organization>SPARTA, Inc.</organization>
<address>
<postal>
<street>7110 Samuel Morse Drive</street>
<city>Columbia</city>
<region>MD</region>
<code>21046</code>
<country>US</country>
</postal>
<phone>+1-443-430-8052</phone>
<email>dtnbsp@gmail.com</email>
</address>
</author>
<date day="11" month="March" year="2011" />
<area>Security</area>
<workgroup>DTN Research Group</workgroup>
<keyword>RFC</keyword>
<keyword>Request for Comments</keyword>
<keyword>I-D</keyword>
<keyword>Internet-Draft</keyword>
<keyword>DTN</keyword>
<keyword>Delay-Tolerant Networking</keyword>
<keyword>Disruption-Tolerant Networking</keyword>
<abstract>
<t>This document defines the bundle security protocol, which provides
data integrity and confidentiality services for the bundle protocol.
Separate capabilities are provided to protect the bundle payload and
additional data that may be included within the bundle. We also describe
various security considerations including some policy options.</t>
<t>This document is a product of the Delay Tolerant Networking Research
Group and has been reviewed by that group. No objections to its
publication as an RFC were raised.</t>
</abstract>
</front>
<middle>
<section title="Introduction" toc="default">
<t>The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in <xref
target="RFC2119"></xref>.</t>
<t>This document defines security features for the bundle protocol <xref
target="DTNBP"></xref> intended for use in delay tolerant networks, in
order to provide Delay-Tolerant Networking (DTN) security services.</t>
<t>The bundle protocol is used in DTNs which overlay multiple networks,
some of which may be challenged by limitations such as intermittent and
possibly unpredictable loss of connectivity, long or variable delay,
asymmetric data rates, and high error rates. The purpose of the bundle
protocol is to support interoperability across such stressed networks.
The bundle protocol is layered on top of underlay-network-specific
convergence layers, on top of network-specific lower layers, to enable
an application in one network to communicate with an application in
another network, both of which are spanned by the DTN.</t>
<t>Security will be important for the bundle protocol. The stressed
environment of the underlying networks over which the bundle protocol
will operate makes it important for the DTN to be protected from
unauthorized use, and this stressed environment poses unique challenges
for the mechanisms needed to secure the bundle protocol. Furthermore,
DTNs may very likely be deployed in environments where a portion of the
network might become compromised, posing the usual security challenges
related to confidentiality, integrity and availability.</t>
<t>Different security processing applies to the payload and extension
blocks that may accompany it in a bundle, and different rules apply to
various extension blocks.</t>
<t>This document describes both the base Bundle Security Protocol (BSP)
and a set of mandatory ciphersuites. A ciphersuite is a specific
collection of various cryptographic algorithms and implementation rules
that are used together to provide certain security services.</t>
<t>The Bundle Security Protocol applies, by definition, only to those
nodes that implement it, known as "security-aware" nodes. There MAY be
other nodes in the DTN that do not implement BSP. All nodes can
interoperate with the exception that BSP security operations can only
happen at security-aware nodes.</t>
<section title="Related Documents" toc="default">
<t>This document is best read and understood within the context of the
following other DTN documents: <list style="empty">
<t>The Delay-Tolerant Network Architecture <xref
target="DTNarch"></xref> defines the architecture for
delay-tolerant networks, but does not discuss security at any
length.</t>
<t>The DTN Bundle Protocol <xref target="DTNBP"></xref> defines
the format and processing of the blocks used to implement the
bundle protocol, excluding the security-specific blocks defined
here.</t>
</list></t>
</section>
<section title="Terminology" toc="default">
<t>We introduce the following terminology for purposes of clarity:
<list style="empty">
<t>source - the bundle node from which a bundle originates</t>
<t>destination - the bundle node to which a bundle is ultimately
destined</t>
<t>forwarder - the bundle node that forwarded the bundle on its
most recent hop</t>
<t>intermediate receiver or "next hop" - the neighboring bundle
node to which a forwarder forwards a bundle.</t>
<t>path - the ordered sequence of nodes through which a bundle
passes on its way from source to destination</t>
</list></t>
<t>In the figure below, which is adapted from figure 1 in the Bundle
Protocol Specification, four bundle nodes (denoted BN1, BN2, BN3, and
BN4) reside above some transport layer(s). Three distinct transport
and network protocols (denoted T1/N1, T2/N2, and T3/N3) are also
shown.</t>
<figure anchor="protocolStack"
title="Bundle Nodes Sit at the Application layer of the Internet Model">
<preamble></preamble>
<artwork><![CDATA[
+---------v-| +->>>>>>>>>>v-+ +->>>>>>>>>>v-+ +-^---------+
| BN1 v | | ^ BN2 v | | ^ BN3 v | | ^ BN4 |
+---------v-+ +-^---------v-+ +-^---------v-+ +-^---------+
| T1 v | + ^ T1/T2 v | + ^ T2/T3 v | | ^ T3 |
+---------v-+ +-^---------v-+ +-^---------v + +-^---------+
| N1 v | | ^ N1/N2 v | | ^ N2/N3 v | | ^ N3 |
+---------v-+ +-^---------v + +-^---------v-+ +-^---------+
| >>>>>>>>^ >>>>>>>>>>^ >>>>>>>>^ |
+-----------+ +------------+ +-------------+ +-----------+
| | | |
|<-- An Internet --->| |<--- An Internet --->|
| | | |
BN = "Bundle Node" as defined in the Bundle Protocol Specification
]]></artwork>
</figure>
<t>Bundle node BN1 originates a bundle that it forwards to BN2. BN2
forwards the bundle to BN3, and BN3 forwards the bundle to BN4. BN1 is
the source of the bundle and BN4 is the destination of the bundle. BN1
is the first forwarder, and BN2 is the first intermediate receiver;
BN2 then becomes the forwarder, and BN3 the intermediate receiver; BN3
then becomes the last forwarder, and BN4 the last intermediate
receiver, as well as the destination.</t>
<t>If node BN2 originates a bundle (for example, a bundle status
report or a custodial signal), which is then forwarded on to BN3, and
then to BN4, then BN2 is the source of the bundle (as well as being
the first forwarder of the bundle) and BN4 is the destination of the
bundle (as well as being the final intermediate receiver).</t>
<t>We introduce the following security-specific DTN terminology: <list>
<t>security-source - a bundle node that adds a security block to a
bundle</t>
<t>security-destination - a bundle node that processes a security
block of a bundle</t>
<t>security path - the ordered sequence of security-aware nodes
through which a bundle passes on its way from the security-source
to the security-destination</t>
</list></t>
<t>Referring to <xref target="protocolStack"></xref> again:</t>
<t>If the bundle that originates at BN1 as source is given a security
block by BN1, then BN1 is the security-source of this bundle with
respect to that security block, as well as being the source of the
bundle.</t>
<t>If the bundle that originates at BN1 as source is given a security
block by BN2, then BN2 is the security-source of this bundle with
respect to that security block, even though BN1 is the source.</t>
<t>If the bundle that originates at BN1 as source is given a security
block by BN1 that is intended to be processed by BN3, then BN1 is the
security-source and BN3 is the security destination with respect to
this security block. The security path for this block is BN1 to
BN3.</t>
<t>A bundle MAY have multiple security blocks. The security-source of
a bundle with respect to a given security block in the bundle MAY be
the same as or different from the security-source of the bundle with
respect to a different security block in the bundle. Similarly, the
security-destination of a bundle with respect to each of that bundle's
security blocks MAY be the same or different. Therefore the security
paths for various blocks MAY be and often will be different.</t>
<t>If the bundle that originates at BN1 as source is given a security
block by BN1 that is intended to be processed by BN3, and BN2 adds a
security block with security-destination BN4, the security paths for
the two blocks overlap but not completely. This problem is discussed
further in <xref target="sec.sz"></xref>.</t>
<t>As required in <xref target="DTNBP"></xref>, forwarding nodes MUST
transmit blocks in a bundle in the same order in which they were
received. This requirement applies to all DTN nodes, not just ones
which implement security processing. Blocks in a bundle MAY be added
or deleted according to the applicable specification, but those blocks
which are both received and transmitted MUST be transmitted in the
same order that they were received.</t>
<t>If a node is not security-aware then it forwards the security
blocks in the bundle unchanged unless the bundle's block processing
flags specify otherwise. If a network has some nodes that are not
security-aware then the block processing flags SHOULD be set such that
security blocks are not discarded at those nodes solely because they
can not be processed there. Except for this, the non-security-aware
nodes are transparent relay points and are invisible as far as
security processing is concerned.</t>
<t>The block sequence also indicates the order in which certain
significant actions have affected the bundle, and therefore the
sequence in which actions MUST occur in order to produce the bundle at
its destination.</t>
</section>
</section>
<section anchor="Headers" title="Security Blocks" toc="default">
<t>There are four types of security block that MAY be included in a
bundle. These are the Bundle Authentication Block (BAB), the Payload
Integrity Block (PIB), the Payload Confidentiality Block (PCB) and the
Extension Security Block (ESB).</t>
<t><list style="empty">
<t>The BAB is used to assure the authenticity and integrity of the
bundle along a single hop from forwarder to intermediate receiver.
Since security blocks are only processed at security-aware nodes, a
"single hop" from a security-aware forwarder to the next
security-aware intermediate receiver might be more than one actual
hop. This situation is discussed further below <xref
target="sec.BAB"></xref>.</t>
<t>The PIB is used to assure the authenticity and integrity of the
payload from the PIB security-source, which creates the PIB, to the
PIB security-destination, which verifies the PIB authenticator. The
authentication information in the PIB MAY (if the ciphersuite
allows) be verified by any node in between the PIB security-source
and the PIB security-destination that has access to the
cryptographic keys and revocation status information required to do
so.</t>
<t>Since a BAB protects a bundle on a "hop-by-hop" basis and other
security blocks MAY be protecting over several hops or end-to-end,
whenever both are present the BAB MUST form the "outer" layer of
protection - that is, the BAB MUST always be calculated and added to
the bundle after all other security blocks have been calculated and
added to the bundle.</t>
<t>The PCB indicates that the payload has been encrypted, in whole
or in part, at the PCB security-source in order to protect the
bundle content while in transit to the PCB security-destination.</t>
<t>PIB and PCB protect the payload and are regarded as
"payload-related" for purposes of the security discussion in this
document. Other blocks are regarded as "non-payload" blocks. Of
course, the primary block is unique and has separate rules.</t>
<t>The ESB provides security for non-payload blocks in a bundle. ESB
therefore is not applied to PIB or PCBs, and of course is not
appropriate for either the payload block or primary block.</t>
</list></t>
<t>Each of the security blocks uses the Canonical Bundle Block Format as
defined in the Bundle Protocol Specification. That is, each security
block is comprised of the following elements: <list style="empty">
<t>- Block type code</t>
<t>- Block processing control flags</t>
<t>- Block EID reference list (OPTIONAL)</t>
<t>- Block data length</t>
<t>- Block-type-specific data fields</t>
</list></t>
<t>Since the four security blocks have most fields in common, we can
shorten the description of the Block-type-specific data fields of each
security block if we first define an abstract security block (ASB) and
then specify each of the real blocks in terms of the fields which are
present/absent in an ASB. Note that no bundle ever contains an actual
ASB, which is simply a specification artifact.</t>
<section anchor="asb" title="Abstract Security Block" toc="default">
<t>Many of the fields below use the "SDNV" type defined in <xref
target="DTNBP"></xref>. SDNV stands for Self-Delimiting Numeric
Value.</t>
<t>An ASB consists of the following mandatory and optional fields:</t>
<t>- Block-type code (one byte) - as in all bundle protocol blocks
except the primary bundle block. The block types codes for the
security blocks are: <list style="empty">
<t>BundleAuthenticationBlock - BAB: 0x02</t>
<t>PayloadIntegrityBlock - PIB: 0x03</t>
<t>PayloadConfidentialityBlock - PCB: 0x04</t>
<t>ExtensionSecurityBlock - ESB: 0x09</t>
</list></t>
<t>- Block processing control flags (SDNV) - defined as in all bundle
protocol blocks except the primary bundle block (as described in the
Bundle Protocol <xref target="DTNBP"></xref>). SDNV encoding is
described in the bundle protocol. There are no general constraints on
the use of the block processing flags, and some specific requirements
are discussed later.</t>
<t>- EID references - composite field defined in <xref
format="default" pageno="false" target="DTNBP"></xref> containing
references to one or two EIDs. Presence of the EID-reference field is
indicated by the setting of the "block contains an EID-reference
field" (EID_REF) bit of the block processing control flags. If one or
more references is present, flags in the ciphersuite ID field,
described below, specify which.</t>
<t>If no EID fields are present then the composite field itself MUST
be omitted entirely and the EID_REF bit MUST be unset. A count field
of zero is not permitted.</t>
<t>The possible EIDs are: <list style="empty">
<t>- (OPTIONAL) Security-source - specifies the security source
for the block. If this is omitted, then the source of the bundle
is assumed to be the security-source unless otherwise
indicated.</t>
<t>- (OPTIONAL) Security-destination - specifies the security
destination for the block. If this is omitted, then the
destination of the bundle is assumed to be the
security-destination unless otherwise indicated.</t>
</list></t>
<t>If two EIDs are present, security-source is first and
security-destination comes second.</t>
<t>- Block data length (SDNV) - as in all bundle protocol blocks
except the primary bundle block. SDNV encoding is described in the
bundle protocol.</t>
<t>- Block-type-specific data fields as follows: <list style="empty">
<t>- Ciphersuite ID (SDNV)</t>
<t>- Ciphersuite flags (SDNV)</t>
<t>- (OPTIONAL) Correlator - when more than one related block is
inserted then this field MUST have the same value in each related
block instance. This is encoded as an SDNV. See note in <xref
target="frag"></xref> with regard to correlator values in bundle
fragments.</t>
<t>- (OPTIONAL) Ciphersuite parameters - compound field of next
two items <list style="empty">
<t>- Ciphersuite parameters length - specifies the length of
the following Ciphersuite parameters data field and is encoded
as an SDNV.</t>
<t>- Ciphersuite parameters data - parameters to be used with
the ciphersuite in use, e.g. a key identifier or
initialization vector (IV). See <xref target="sec.PRF"></xref>
for a list of potential parameters and their encoding rules.
The particular set of parameters that are included in this
field are defined as part of the ciphersuite
specification.</t>
</list></t>
<t>- (OPTIONAL) Security result - compound field of next two items
<list style="empty">
<t>- Security result length - contains the length of the next
field and is encoded as an SDNV.</t>
<t>- Security result data - contains the results of the
appropriate ciphersuite-specific calculation (e.g., a
signature, MAC or ciphertext block key).</t>
</list></t>
</list></t>
<figure anchor="ASBdiagram" title="Abstract Security Block Structure">
<preamble>Although the diagram hints at a 32-bit layout this is
purely for the purpose of exposition. Except for the "type" field,
all fields are variable in length.</preamble>
<artwork><![CDATA[
+----------------+----------------+----------------+----------------+
| type | flags (SDNV) | EID ref list(comp) |
+----------------+----------------+----------------+----------------+
| length (SDNV) | ciphersuite (SDNV) |
+----------------+----------------+----------------+----------------+
| ciphersuite flags (SDNV) | correlator (SDNV) |
+----------------+----------------+----------------+----------------+
|params len(SDNV)| ciphersuite params data |
+----------------+----------------+----------------+----------------+
|res-len (SDNV) | security result data |
+----------------+----------------+----------------+----------------+
]]></artwork>
</figure>
<t>Some ciphersuites are specified in <xref
target="ciphersuites"></xref>, which also specifies the rules which
MUST be satisfied by ciphersuite specifications. Additional
ciphersuites MAY be defined in separate specifications. Ciphersuite
IDs not specified are reserved. Implementations of the bundle security
protocol decide which ciphersuites to support, subject to the
requirements of <xref target="ciphersuites"></xref>. It is RECOMMENDED
that implementations that allow additional ciphersuites permit
ciphersuite ID values at least up to and including 127, and they MAY
decline to allow larger ID values.</t>
<t>The structure of the ciphersuite flags field is shown in <xref
target="CIDFig"></xref>. In each case the presence of an optional
field is indicated by setting the value of the corresponding flag to
one. A value of zero indicates the corresponding optional field is
missing. Presently there are five flags defined for the field and for
convenience these are shown as they would be extracted from a
single-byte SDNV. Future additions may cause the field to grow to the
left so, as with the flags fields defined in <xref
target="DTNBP"></xref>, the description below numbers the bit
positions from the right rather than the standard RFC definition which
numbers bits from the left. <list style="empty">
<t>src - bit 4 indicates whether the EID-reference field of the
ASB contains the optional reference to the security-source.</t>
<t>dest - bit 3 indicates whether the EID-reference field of the
ASB contains the optional reference to the
security-destination.</t>
<t>parm - bit 2 indicates whether the
ciphersuite-parameters-length and ciphersuite parameters data
fields are present or not.</t>
<t>corr - bit 1 indicates whether or not the ASB contains an
optional correlator.</t>
<t>res - bit 0 indicates whether or not the ASB contains the
security result length and security result data fields.</t>
<t>bits 5-6 are reserved for future use.</t>
</list></t>
<figure anchor="CIDFig" title="Ciphersuite Flags">
<artwork><![CDATA[
Bit Bit Bit Bit Bit Bit Bit
6 5 4 3 2 1 0
+-----+-----+-----+-----+-----+-----+-----+
| reserved | src |dest |parm |corr |res |
+-----+-----+-----+-----+-----+-----+-----+
]]></artwork>
</figure>
<t>A little bit more terminology: if the block is a PIB then when we
refer to the "PIB-source", we mean the security source for the PIB as
represented by the EID reference in the EID-references field.
Similarly we may refer to the PCB-dest, meaning the
security-destination of the PCB, again as represented by an EID
reference. For example, referring to <xref
target="protocolStack"></xref> again, if the bundle that originates at
BN1 as source is given a Confidentiality Block (PCB) by BN1 that is
protected using a key held by BN3 and it is given a Payload Integrity
Block (PIB) by BN1, then BN1 is both the PCB-source and the PIB-source
of the bundle, and BN3 is the PCB-dest of the bundle.</t>
<t>The correlator field is used to associate several related instances
of a security block. This can be used to place a BAB that contains the
ciphersuite information at the "front" of a (probably large) bundle,
and another correlated BAB that contains the security result at the
"end" of the bundle. This allows even very memory-constrained nodes to
be able to process the bundle and verify the BAB. There are similar
use cases for multiple related instances of PIB and PCB as will be
seen below.</t>
<t>The ciphersuite specification MUST make it clear whether or not
multiple block instances are allowed, and if so, under what
conditions. Some ciphersuites can of course leave flexibility to the
implementation, whereas others might mandate a fixed number of
instances.</t>
<t>For convenience, we use the term "first block" to refer to the
initial block in a group of correlated blocks, or to the single block
if there are no others in the set. Obviously there can be several
unrelated groups in a bundle, each containing only one block or more
than one, and each has its own "first block".</t>
</section>
<section anchor="sec.BAB" title="Bundle Authentication Block"
toc="default">
<t>In this section we describe typical BAB field values for two
scenarios - where a single instance of the BAB contains all the
information and where two related instances are used, one "up front"
which contains the ciphersuite and another following the payload which
contains the security result (e.g. a MAC).</t>
<t>For the case where a single BAB is used: <list style="empty">
<t>The block-type code field value MUST be 0x02.</t>
<t>The block processing control flags value can be set to whatever
values are required by local policy. Ciphersuite designers should
carefully consider the effect of setting flags that either discard
the block or delete the bundle in the event that this block cannot
be processed.</t>
<t>The ciphersuite ID MUST be documented as a hop-by-hop
authentication-ciphersuite which requires one instance of the
BAB.</t>
<t>The correlator field MUST NOT be present.</t>
<t>The ciphersuite parameters field MAY be present, if so
specified in the ciphersuite specification.</t>
<t>An EID reference to the security-source MAY be present. The
security-source can also be specified as part of key information
described in <xref target="sec.PRF"></xref> or another block such
as the Previous Hop Insertion Block <xref target="PHIB"></xref>.
The security-source might also be inferred from some
implementation-specific means such as the convergence layer.</t>
<t>An EID reference to the security-destination MAY be present and
is useful to ensure that the bundle has been forwarded to the
correct next-hop node.</t>
<t>The security result MUST be present as it is effectively the
"output" from the ciphersuite calculation (e.g. the MAC or
signature) applied to the (relevant parts of) the bundle (as
specified in the ciphersuite definition).</t>
</list></t>
<t>For the case using two related BAB instances, the first instance is
as defined above, except the ciphersuite ID MUST be documented as a
hop-by-hop authentication ciphersuite that requires two instances of
the BAB. In addition, the correlator MUST be present and the security
result length and security result fields MUST be absent. The second
instance of the BAB MUST have the same correlator value present and
MUST contain security result length and security result data fields.
The other optional fields MUST NOT be present. Typically, this second
instance of a BAB will be the last block of the bundle.</t>
<t>The details of key transport for BAB are specified by the
particular ciphersuite. In the absence of conflicting requirements,
the following should be noted by implementors:</t>
<t>- the key information item <xref target="sec.PRF"></xref> is
OPTIONAL, and if not provided then the key SHOULD be inferred from the
source-destination tuple, being the previous key used, a key created
from a key-derivation function, or a pre-shared key</t>
<t>- if all the nodes are security-aware, the capabilities of the
underlying convergence layer might be useful for identifying the
security-source</t>
<t>- depending upon the key mechanism used, bundles can be signed by
the sender, or authenticated for one or more recipients, or both.</t>
</section>
<section anchor="sec.PIB" title="Payload Integrity Block" toc="default">
<t>A PIB is an ASB with the following additional restrictions: <list
style="empty">
<t>The block type code value MUST be 0x03.</t>
<t>The block processing control flags value can be set to whatever
values are required by local policy. Ciphersuite designers should
carefully consider the effect of setting flags that either discard
the block or delete the bundle in the event that this block cannot
be processed.</t>
<t>The ciphersuite ID MUST be documented as an end-to-end
authentication-ciphersuite or as an end-to-end
error-detection-ciphersuite.</t>
<t>The correlator MUST be present if the ciphersuite requires more
than one related instance of a PIB be present in the bundle. The
correlator MUST NOT be present if the ciphersuite only requires
one instance of the PIB in the bundle.</t>
<t>The ciphersuite parameters field MAY be present.</t>
<t>An EID reference to the security-source MAY be present. The
security-source can also be specified as part of key information
described in <xref target="sec.PRF"></xref>.</t>
<t>An EID reference to the security-destination MAY be
present.</t>
<t>The security result is effectively the "output" from the
ciphersuite calculation (e.g. the MAC or signature) applied to the
(relevant parts of) the bundle. As in the case of the BAB, this
field MUST be present if the correlator is absent. If more than
one related instance of the PIB is required then this is handled
in the same way as described for the BAB above.</t>
<t>The ciphersuite MAY process less than the entire original
bundle payload. This might be because it is defined to process
some subset of the bundle, or perhaps because the the current
payload is a fragment of an original bundle. For whatever reason,
if the ciphersuite processes less than the complete, original
bundle payload, the ciphersuite parameters of this block MUST
specify which bytes of the bundle payload are protected.</t>
</list></t>
<t>For some ciphersuites, (e.g. those using asymmetric keying to
produce signatures or those using symmetric keying with a group key),
the security information can be checked at any hop on the way to the
security destination that has access to the required keying
information. This possibility is further discussed in <xref
target="sec.bon"></xref> below.</t>
<t>The use of a generally-available key is RECOMMENDED if custodial
transfer is employed and all nodes SHOULD verify the bundle before
accepting custody.</t>
<t>Most asymmetric PIB-ciphersuites will use the PIB-source to
indicate the signer and will not require the PIB-dest field because
the key needed to verify the PIB authenticator will be a public key
associated with the PIB-source.</t>
</section>
<section anchor="sec.PCB" title="Payload Confidentiality Block"
toc="default">
<t>A typical confidentiality ciphersuite will encrypt the payload
using a randomly generated bundle encrypting key (BEK) and will use a
key information item in the PCB security parameters to carry the BEK
encrypted with some long term key encryption key (KEK) or well-known
public key. If neither the destination nor security-destination
resolves the key to use for decryption, the key information item in
the ciphersuite parameters field can also be used to indicate the
decryption key with which the BEK can be recovered. If the bundle
already contains PIBs and/or PCBs these SHOULD also be encrypted using
this same BEK, as described just below for "super-encryption". The
encrypted block is encapsulated into a new PCB that replaces the
original block at the same place in the bundle.</t>
<t>It is strongly RECOMMENDED that a data integrity mechanism be used
in conjunction with confidentiality, and that encryption-only
ciphersuites NOT be used. AES-GCM satisfies this requirement. The
"authentication tag" or "integrity check value" is stored into
security-result rather than being appended to the payload as is common
in some protocols since, as described below, it is important that
there be no change in the size of the payload.</t>
<t>The payload is encrypted "in-place", that is, following encryption,
the payload block payload field contains ciphertext, not plaintext.
The payload block processing flags are unmodified.</t>
<t>The "in-place" encryption of payload bytes is to allow bundle
payload fragmentation and re-assembly, and custody transfer, to
operate without knowledge of whether or not encryption has occurred
and, if so, how many times.</t>
<t>Fragmentation and reassembly and custody transfer are adversely
affected by a change in size of the payload due to ambiguity about
what byte range of the original payload is actually in any particular
fragment. Ciphersuites SHOULD place any payload expansion, such as
authentication tags (integrity check values) and any padding generated
by a block-mode cipher, into an "integrity check value" item in the
security-result field (see <xref target="sec.PRF"></xref>) of the
confidentiality block.</t>
<t>Payload super-encryption is allowed; that is, encrypting a payload
that has already been encrypted, perhaps more than once. Ciphersuites
SHOULD define super-encryption such that, as well as re-encrypting the
payload, it also protects the parameters of earlier encryption.
Failure to do so may represent a vulnerability in some
circumstances.</t>
<t>Confidentiality is normally applied to the payload, and possibly to
additional blocks. It is RECOMMENDED to apply a Payload
Confidentiality ciphersuite to non-payload blocks only if these SHOULD
be super-encrypted with the payload. If super-encryption of the block
is not desired then protection of the block SHOULD be done using the
Extension Security Block mechanism rather than PCB.</t>
<t>Multiple related PCB instances are required if both the payload and
PIBs and PCBs in the bundle are to be encrypted. These multiple PCB
instances require correlators to associate them with each other since
the key information is provided only in the first PCB.</t>
<t>There are situations where more than one PCB instance is required
but the instances are not "related" in the sense which requires
correlators. One example is where a payload is encrypted for more than
one security-destination so as to be robust in the face of routing
uncertainties. In this scenario the payload is encrypted using a BEK.
Several PCBs contain the BEK encrypted using different KEKs, one for
each destination. These multiple PCB instances, are not "related" and
SHOULD NOT contain correlators.</t>
<t>The ciphersuite MAY apply different rules to confidentiality for
non-payload blocks.</t>
<t>A PCB is an ASB with the following additional restrictions: <list
style="empty">
<t>The block type code value MUST be 0x04.</t>
<t>The block processing control flags value can be set to whatever
values are required by local policy, except that a PCB "first
block" MUST have the "replicate in every fragment" flag set. This
flag SHOULD NOT be set otherwise. Ciphersuite designers should
carefully consider the effect of setting flags that either discard
the block or delete the bundle in the event that this block cannot
be processed.</t>
<t>The ciphersuite ID MUST be documented as a
confidentiality-ciphersuite.</t>
<t>The correlator MUST be present if there is more than one
related PCB instance. The correlator MUST NOT be present if there
are no related PCB instances.</t>
<t>If a correlator is present, the key information MUST be placed
in the PCB "first block".</t>
<t>Any additional bytes generated as a result of encryption and/or
authentication processing of the payload SHOULD be placed in an
"integrity check value" field (see <xref target="sec.PRF"></xref>)
in the security-result of the first PCB.</t>
<t>The ciphersuite parameters field MAY be present.</t>
<t>An EID reference to the security-source MAY be present. The
security-source can also be specified as part of key information
described in <xref target="sec.PRF"></xref>.</t>
<t>An EID reference to the security-destination MAY be
present.</t>
<t>The security result MAY be present and normally contains fields
such as an encrypted bundle encryption key, authentication tag or
the encrypted versions of bundle blocks other than the payload
block.</t>
</list></t>
<t>The ciphersuite MAY process less than the entire original bundle
payload, either because the current payload is a fragment of the
original bundle or just because it is defined to process some subset.
For whatever reason, if the ciphersuite processes less than the
complete, original bundle payload the "first" PCB MUST specify, as
part of the ciphersuite parameters, which bytes of the bundle payload
are protected.</t>
<t>PCB ciphersuites MUST specify which blocks are to be encrypted. The
specification MAY be flexible and be dependent upon block type,
security policy, various data values and other inputs but it MUST be
deterministic. The determination of whether a block is to be encrypted
or not MUST NOT be ambiguous.</t>
<t>As was the case for the BAB and PIB, if the ciphersuite requires
more than one instance of the PCB, then the "first block" MUST contain
any optional fields (e.g., security destination etc.) that apply to
all instances with this correlator. These MUST be contained in the
first instance and MUST NOT be repeated in other correlated blocks.
Fields that are specific to a particular instance of the PCB MAY
appear in that PCB. For example, security result fields MAY (and
probably will) be included in multiple related PCB instances, with
each result being specific to that particular block. Similarly,
several PCBs might each contain a ciphersuite parameters field with an
IV specific to that PCB instance.</t>
<t>Put another way: when confidentiality will generate multiple
blocks, it MUST create a "first" PCB with the required ciphersuite ID,
parameters etc. as specified above. Typically, this PCB will appear
early in the bundle. This "first" PCB contains the parameters that
apply to the payload and also to the other correlated PCBs. The
correlated PCBs follow the "first" PCB and MUST NOT repeat the
ciphersuite parameters, security-source, or security-destination
fields from the first PCB. These correlated PCBs need not follow
immediately after the "first" PCB, and probably will not do so. Each
correlated block, encapsulating an encrypted PIB or PCB, is at the
same place in the bundle as the original PIB or PCB.</t>
<t>A ciphersuite MUST NOT mix payload data and a non-payload block in
a single PCB.</t>
<t>Even if a to-be-encrypted block has the "discard" flag set, whether
or not the PCB's "discard" flag is set is an implementation/policy
decision for the encrypting node. (The "discard" flag is more properly
called the "discard if block cannot be processed" flag.)</t>
<t>Any existing EID-list in the to-be-encapsulated original block
remains exactly as-is, and is copied to become the EID-list for the
replacing block. The encapsulation process MUST NOT replace or remove
the existing EID-list entries. This is critically important for
correct updating of entries at the security-destination.</t>
<t>At the security-destination, either specific destination or the
bundle destination, the processes described above are reversed. The
payload is decrypted in-place using the salt, IV and key values in the
first PCB, including verification using the ICV. These values are
described below in <xref target="sec.PRF"></xref>. Each correlated PCB
is also processed at the same destination, using the salt and key
values from the first PCB and the block-specific IV item. The
"encapsulated block" item in the security-result is decrypted and
validated, using also the tag which SHOULD have been appended to the
ciphertext of the original block data. Assuming the validation
succeeds, the resultant plaintext, which is the entire content of the
original block, replaces the PCB at the same place in the bundle. The
block type reverts to that of the original block prior to
encapsulation, and the other block-specific data fields also return to
their original values. Implementors are cautioned that this
"replacement" process requires delicate stitchery, as the EID-list
contents in the decapsulated block are invalid. As noted above, the
EID-list references in the original block were preserved in the
replacing PCB, and will have been updated as necessary as the bundle
has toured the dtn. The references from the PCB MUST replace the
references within the EID-list of the newly-decapsulated block. Caveat
implementor.</t>
</section>
<section anchor="sec.ESB" title="Extension Security Block" toc="default">
<t>Extension security blocks provide protection for
non-payload-related portions of a bundle. ESBs MUST NOT be used for
the primary block or payload, including payload-related security
blocks (PIBs and PCBs).</t>
<t>It is sometimes desirable to protect certain parts of a bundle in
ways other than those applied to the bundle payload. One such example
is bundle metadata that might specify the kind of data in the payload
but not the actual payload detail, as described in <xref
target="DTNMD"></xref>.</t>
<t>ESBs are typically used to apply confidentiality protection. While
it is possible to create an integrity-only ciphersuite, the block
protection is not transparent and makes access to the data more
difficult. For simplicity, this discussion describes use of a
confidentiality ciphersuite.</t>
<t>The protection mechanisms in ESBs are similar to other security
blocks with two important differences: <list style="empty">
<t>- different key values are used (using same key as for payload
would defeat the purpose)</t>
<t>- the block is not encrypted or super-encrypted with the
payload</t>
</list></t>
<t>A typical ESB ciphersuite will encrypt the extension block using a
randomly generated ephemeral key and will use the key information item
in the security parameters field to carry the key encrypted with some
long term key encryption key (KEK) or well-known public key. If
neither the destination nor security-destination resolves the key to
use for decryption, the key information item in the ciphersuite
parameters field can be used also to indicate the decryption key with
which the BEK can be recovered.</t>
<t>It is strongly RECOMMENDED that a data integrity mechanism be used
in conjunction with confidentiality, and that encryption-only
ciphersuites NOT be used. AES-GCM satisfies this requirement.</t>
<t>The ESB is placed in the bundle in the same position as the block
being protected. That is, the entire original block is processed
(encrypted, etc) and encapsulated in a "replacing" ESB-type block, and
this appears in the bundle at the same sequential position as the
original block. The processed data is placed in the security-result
field.</t>
<t>The process is reversed at the security destination with the
recovered plaintext block replacing the ESB that had encapsulated it.
Processing of EID-list entries, if any, is described above in <xref
target="sec.PCB"></xref> and this MUST be followed in order to
correctly recover EIDs.</t>
<t>An ESB is an ASB with the following additional restrictions: <list
style="empty">
<t>Block type is 0x09.</t>
<t>Ciphersuite flags indicate which fields are present in this
block. Ciphersuite designers should carefully consider the effect
of setting flags that either discard the block or delete the
bundle in the event that this block cannot be processed.</t>
<t>EID references MUST be stored in the EID reference list.</t>
<t>Security-source MAY be present. The security-source can also be
specified as part of key information described in <xref
target="sec.PRF"></xref>. If neither is present then the
bundle-source is used as the security-source.</t>
<t>Security-destination MAY be present. If not present, then the
bundle-destination is used as the security-destination.</t>
</list></t>
<t>The security-parameters MAY optionally contain a block-type field
to indicate the type of the encapsulated block. Since this replicates
a field in the encrypted portion of the block, it is a slight security
risk and its use is therefore OPTIONAL.</t>
</section>
<section anchor="sec.PRF" title="Parameters and Result Fields"
toc="default">
<t>Various ciphersuites include several items in the
security-parameters and/or security-result fields. Which items MAY
appear is defined by the particular ciphersuite description. A
ciphersuite MAY support several instances of the same type within a
single block.</t>
<t>Each item is represented as type-length-value. Type is a single
byte indicating which item this is. Length is the count of data bytes
to follow, and is an SDNV-encoded integer. Value is the data content
of the item.</t>
<t>Item types are <list style="empty">
<t>0: reserved</t>
<t>1: initialization vector (IV)</t>
<t>2: reserved</t>
<t>3: key information</t>
<t>4: fragment range (offset and length as a pair of SDNVs)</t>
<t>5: integrity signature</t>
<t>6: reserved</t>
<t>7: salt</t>
<t>8: PCB integrity check value (ICV)</t>
<t>9: reserved</t>
<t>10: encapsulated block</t>
<t>11: block type of encapsulated block</t>
<t>12 - 191: reserved</t>
<t>192 - 250: private use</t>
<t>251 - 255: reserved</t>
</list></t>
<t>The folowing descriptions apply to usage of these items for all
ciphersuites. Additional characteristics are noted in the discussion
for specific suites. <list style="empty">
<t>- initialization vector(IV): random value, typically eight to
sixteen bytes</t>
<t>- key information: key material encoded or protected by the key
management system, and used to transport an ephemeral key
protected by a long-term key. This item is discussed further below
in <xref target="sec.KT"></xref></t>
<t>- fragment range: pair of SDNV values (offset then length)
specifying the range of payload bytes to which a particular
operation applies. This is termed "fragment range" since that is
its typical use, even though sometimes it describes a subset range
that is not a fragment. The offset value MUST be the offset within
the original bundle, which might not be the offset within the
current bundle if the current bundle is already a fragment</t>
<t>- integrity signature: result of BAB or PIB digest or signing
operation. This item is discussed further below in <xref
target="sec.KT"></xref></t>
<t>- salt: an IV-like value used by certain confidentiality
suites</t>
<t>- PCB integrity check value(ICV): output from certain
confidentiality ciphersuite operations to be used at the
destination to verify that the protected data has not been
modified</t>
<t>- encapsulated block: result of confidentiality operation on
certain blocks, contains the ciphertext of the block and MAY also
contain an integrity check value appended to the ciphertext; MAY
also contain padding if required by the encryption mode; used for
non-payload blocks only</t>
<t>- block type of encapsulated block: block type code for a block
that has been encapsulated in ESB</t>
</list></t>
</section>
<section anchor="sec.KT" title="Key Transport" toc="default">
<t>This specification endeavours to maintain separation between the
security protocol and key management. However, these two interact in
the transfer of key information, etc., from security-source to
security-destination. The intent of the separation is to facilitate
use of a variety of key management systems without a necessity to
tailor a ciphersuite to each individually.</t>
<t>The key management process deals with such things as long-term
keys, specifiers for long-term keys, certificates for long-term keys
and integrity signatures using long-term keys. The ciphersuite itself
SHOULD NOT require a knowledge of these, and separation is improved if
it treats these as opaque entities, to be handled by the key
management process.</t>
<t>The key management process deals specifically with the content of
two of the items defined above in <xref target="sec.PRF"></xref>:- key
information (item type 3) and integrity signature (item type 5). The
ciphersuite MUST define the details and format for these items. To
facilitate interoperability, it is strongly RECOMMENDED that the
implementations use the appropriate definitions from Cryptographic
Message Syntax (CMS) <xref target="RFC5652"></xref> and related
RFCs.</t>
<t>Many situations will require several pieces of key information.
Again, ciphersuites MUST define whether they accept these packed into
a single key information item and/or separated into multiple instances
of key information. For interoperability, it is RECOMMENDED that
ciphersuites accept these packed into a single key-information item,
and that they MAY additionally choose to accept them sent as separate
items.</t>
</section>
<section anchor="sec.PIBPCBcombos" title="PIB and PCB combinations">
<t>Given the above definitions, nodes are free to combine applications
of PIB and PCB in any way they wish - the correlator value allows for
multiple applications of security services to be handled separately.
Since PIB and PCB apply to the payload and ESB to non-payload blocks,
combinations of ESB with PIB and/or PCB are not considered.</t>
<t>There are some obvious security problems that could arise when
applying multiple services. For example, if we encrypted a payload but
left a PIB security result containing a signature in the clear,
payload guesses could be confirmed.</t>
<t>We cannot, in general, prevent all such problems since we cannot
assume that every ciphersuite definition takes account of every other
ciphersuite definition. However, we can limit the potential for such
problems by requiring that any ciphersuite which applies to one
instance of a PIB or PCB, MUST be applied to all instances with the
same correlator.</t>
<t>We now list the PIB and PCB combinations which we envisage as being
useful to support: <list style="empty">
<t>Encrypted tunnels - a single bundle MAY be encrypted many times
en-route to its destination. Clearly it has to be decrypted an
equal number of times, but we can imagine each encryption as
representing the entry into yet another layer of tunnel. This is
supported by using multiple instances of PCB, but with the payload
encrypted multiple times, "in-place". Depending upon the
ciphersuite defintion, other blocks can and should be encrypted,
as discussed above and in <xref target="sec.PCB"></xref> to ensure
that parameters are protected in the case of super-encryption.</t>
<t>Multiple parallel authenticators - a single security source
might wish to protect the integrity of a bundle in multiple ways.
This could be required if the bundle's path is unpredictable, and
if various nodes might be involved as security destinations.
Similarly, if the security source cannot determine in advance
which algorithms to use, then using all might be reasonable. This
would result in uses of PIB which presumably all protect the
payload, and which cannot in general protect one another. Note
that this logic can also apply to a BAB, if the unpredictable
routing happens in the convergence layer, so we also envisage
support for multiple parallel uses of BAB.</t>
<t>Multiple sequential authenticators - if some security
destination requires assurance about the route that bundles have
taken, then it might insist that each forwarding node add its own
PIB. More likely, however would be that outbound "bastion" nodes
would be configured to sign bundles as a way of allowing the
sending "domain" to take accountability for the bundle. In this
case, the various PIBs will likely be layered, so that each
protects the earlier applications of PIB.</t>
<t>Authenticated and encrypted bundles - a single bundle MAY
require both authentication and confidentiality. Some
specifications first apply the authenticator and follow this by
encrypting the payload and authenticator. As noted previously in
the case where the authenticator is a signature, there are
security reasons for this ordering. (See the
PCB-RSA-AES128-PAYLOAD-PIB-PCB ciphersuite defined later in <xref
target="rsaaes"></xref>.) Others apply the authenticator after
encryption, that is, to the ciphertext. This ordering is generally
RECOMMENDED and minimizes attacks which, in some cases, can lead
to recovery of the encryption key.</t>
</list></t>
<t>There are no doubt other valid ways to combine PIB and PCB
instances, but these are the "core" set supported in this
specification. Having said that, as will be seen, the mandatory
ciphersuites defined here are quite specific and restrictive in terms
of limiting the flexibility offered by the correlator mechanism. This
is primarily designed to keep this specification as simple as
possible, while at the same time supporting the above scenarios.</t>
</section>
</section>
<section title="Security Processing" toc="default">
<t>This section describes the security aspects of bundle processing.</t>
<section anchor="secPEP" title="Nodes as policy enforcement points"
toc="default">
<t>All nodes are REQUIRED to have and enforce their own configurable
security policies, whether these policies be explicit or default, as
defined in <xref target="sec.Defaults"></xref>.</t>
<t>All nodes serve as Policy Enforcement Points (PEP) insofar as they
enforce polices that MAY restrict the permissions of bundle nodes to
inject traffic into the network. Policies MAY apply to traffic
originating at the current node, traffic terminating at the current
node and traffic to be forwarded by the current node to other nodes.
If a particular transmission request, originating either locally or
remotely, satisfies the node's policy or policies and is therefore
accepted, then an outbound bundle can be created and dispatched. If
not, then in its role as a PEP, the node will not create or forward a
bundle. Error handling for such cases is currently considered out of
scope of this document.</t>
<t>Policy enforcing code MAY override all other processing steps
described here and elsewhere in this document. For example, it is
valid to implement a node which always attempts to attach a PIB.
Similarly it is also valid to implement a node which always rejects
all requests which imply the use of a PIB.</t>
<t>Nodes MUST consult their security policy to determine the criteria
that a received bundle ought to meet before it will be forwarded.
These criteria MUST include a determination of whether or not the
received bundle MUST include a valid BAB, PIB, PCB or ESB. If the
bundle does not meet the node's policy criteria, then the bundle MUST
be discarded and processed no further; in this case, a bundle status
report indicating the failure MAY be generated.</t>
<t>The node's policy MAY call for the node to add or subtract some
security blocks. For example, it might require the node attempt to
encrypt (parts of) the bundle for some security-destination, or that
it add a PIB. If the node's policy requires a BAB to be added to the
bundle, it MUST be added last so that the calculation of its security
result MAY take into consideration the values of all other blocks in
the bundle.</t>
</section>
<section anchor="sec.stack" title="Processing order of security blocks"
toc="default">
<t>The processing order of security actions for a bundle is critically
important for the actions to complete successfully. In general, the
actions performed at the originating node MUST be executed in the
reverse sequence at the destination. There are variations and
exceptions, and these are noted below.</t>
<t>The sequence is maintained in the ordering of security blocks in
the bundle. It is for this reason that blocks MUST NOT be rearranged
at forwarding nodes, whether they support the security protocols or
not. The only blocks that participate in this ordering are the primary
and payload blocks, and the PIB and PCB security blocks themselves.
All other extension blocks, including ESBs, are ignored for purposes
of determining the processing order.</t>
<t>The security blocks are added to and removed from a bundle in a
last-in-first-out (LIFO) manner, with the top of the stack immediately
after the primary block. A newly-created bundle has just the primary
and payload blocks, and the stack is empty. As security actions are
requested for the bundle, security blocks are pushed onto the stack
immediately after the primary block. The early actions have security
blocks close to the payload, later actions have blocks nearer to the
primary block. The actions deal with only those blocks in the bundle
at the time so, for example, the first to be added processes only the
payload and primary blocks, the next might process the first if it
chooses and the payload and primary, and so on. The last block to be
added can process all the blocks.</t>
<t>When the bundle is received, this process is reversed and security
processing begins at the top of the stack, immediately after the
primary block. The security actions are performed and the block is
popped from the stack. Processing continues with the next security
block until finally only the payload and primary blocks remain.</t>
<t>The simplicity of this description is undermined by various
real-world requirements. Nonetheless it serves as a helpful initial
framework for understanding the bundle security process.</t>
<t>The first issue is a very common one and easy to handle. The bundle
may be sent indirectly to its destination, requiring several
forwarding hops to finally arrive there. Security processing happens
at each node, assuming that the node supports bundle security. For the
following discussion, we assume that a bundle is created and that
confidentiality, then payload integrity and finally bundle
authentication are applied to it. The block sequence would therefore
be primary-BAB-PIB-PCB-payload. Traveling from source to destination
requires going through one intermediate node, so the trip consists of
two hops.</t>
<t>When the bundle is received at the intermediate node, the receive
processing validates the BAB and pops it from the stack. However the
PIBs and PCBs have the final destination as their security
destination, so these can't be processed and removed. The intermediate
node then begins the send process with the four remaining blocks in
the bundle. The outbound processing adds any security blocks required
by local policy, and these are pushed on the stack immediately after
the primary block, ahead of the PIB. In this example, the intermediate
node adds a PIB as a signature that the bundle has passed through the
node.</t>
<t>The receive processing at the destination first handles the
intermediate node's PIB and pops it, next is the originator's PIB,
also popped, and finally the originator's confidentiality block which
allows the payload to be decrypted and the bundle handled for
delivery.</t>
<t>DTNs in practice are likely to be more complex. The security policy
for a node specifies the security requirements for a bundle. The
policy will possibly cause one or more security operations to be
applied to the bundle at the current node, each with its own
security-destination. Application of policy at subsequent nodes might
cause additional security operations, each with a
security-destination. The list of security-destinations in the
security blocks (BAB, PIB and PCB, not ESB) creates a partial-ordering
of nodes that MUST be visited en route to the bundle destination.</t>
<t>The bundle security scheme does not deal with security paths that
overlap partially but not completely. The security policy for a node
MUST avoid specifying for a bundle a security-destination that causes
a conflict with any existing security-destination in that bundle. This
is discussed further below in <xref target="sec.sz"></xref>.</t>
<t>The second issue relates to the reversibility of certain security
process actions. In general, the actions fall into two categories:
those which do not affect other parts of the bundle, and those which
are fully reversible. Creating a bundle signature, for example, does
not change the bundle content except for the result. The encryption
performed as part of the confidentiality processing does change the
bundle, but the reverse processing at the destination restores the
original content.</t>
<t>The third category is the one where the bundle content has changed
slightly and in a non-destructive way, but there is no mechanism to
reverse the change. The simplest example is the addition of an
EID-reference to a security block. The addition of the reference
causes the text to be added to the bundle's dictionary. The text may
be used also by other references so removal of the block and this
specific EID-reference does not cause removal of the text from the
dictionary. This shortcoming is of no impact to the "sequential" or
"wrapping" security schemes described above, but does cause failures
with "parallel" authentication mechanisms. Solutions for this problem
are implementation-specific and typically involve multi-pass
processing such that blocks are added at one stage and the security
results calculated at a later stage of the overall process.</t>
<t>Certain ciphersuites have sequence requirements for their correct
operation, most notably the bundle authentication ciphersuites.
Processing for bundle authentication is required to happen after all
other sending operations, and prior to any receive operations at the
next hop node. It follows therefore that BABs MUST always be pushed
onto the stack after all others.</t>
<t>Although we describe the security block list as a stack, there are
some blocks which are placed after the payload and therefore are not
part of the stack. The BundleAuthentication ciphersuite #1 ("BA1")
requires a second, correlated block to contain the security-result and
this block is placed after the payload, usually as the last block in
the bundle. We can apply the stack rules even to these blocks by
specifying that they be added to the end of the bundle at the same
time that their "owner" or "parent" block is pushed on the stack. In
fact, they form a stack beginning at the payload but growing in the
other direction. Also, not all blocks in the main stack have a
corresponding entry in the trailing stack. The only blocks which MUST
follow the payload are those mandated by ciphersuites as correlated
blocks for holding a security-result. No other blocks are required to
follow the payload block and it is NOT RECOMMENDED that they do
so.</t>
<t>ESBs are effectively placeholders for the blocks they encapsulate
and, since those do not form part of the processing sequence described
above, ESBs themselves do not either. ESBs MAY be correlated, however,
so the "no reordering" requirement applies to them as well.</t>
</section>
<section anchor="sec.sz" title="Security Regions" toc="default">
<t>Each security block has a security path, as described in the
discussion for <xref target="protocolStack"></xref>, and the paths for
various blocks are often different.</t>
<t>BABs are always for a single hop and these restricted paths never
cause conflict.</t>
<t>The paths for PIBs and PCBs are often from bundle source to bundle
destination, to provide end-to-end protection. A
bundle-source-to-bundle-destination path likewise never causes a
problem.</t>
<t>Another common scenario is for gateway-to-gateway protection of
traffic between two sub-networks ("tunnel-mode").</t>
<t>Looking at <xref target="protocolStack"></xref> and the simplified
version shown in <xref target="sz1"></xref>, we can regard BN2 and BN3
as gateways connecting the two subnetworks labeled "An internet". As
long as they provide security for the BN2-BN3 path, all is well.
Problems begin, for example, when BN2 adds blocks with BN4 as the
security-destination, and originating node BN1 has created blocks with
BN3 as security-destination. We now have two paths and neither is a
subset of the other.</t>
<t>This scenario should be prevented by node BN2's security policy
being aware of the already-existing block with BN3 as the security
destination. This policy SHOULD NOT specify a security-dest that is
further distant than any existing security-dest.</t>
<figure anchor="sz1" title="Overlapping security paths">
<preamble></preamble>
<artwork><![CDATA[
+---------v-| +->>>>>>>>>>v-+ +->>>>>>>>>>v-+ +-^---------+
| BN1 v | | ^ BN2 v | | ^ BN3 v | | ^ BN4 |
+---------v-+ +-^---------v-+ +-^---------v-+ +-^---------+
>>>>>>>>^ >>>>>>>>>>^ >>>>>>>>^
<------------- BN1 to BN3 path ------------>
<------------- BN2 to BN4 path ------------>
]]></artwork>
</figure>
<t>Consider the case where the security concern is for data integrity,
so the blocks are PIBs. BN1 creates one ("PIa") along with the new
bundle, and BN2 pushes its own PIB "PIb" on the stack, with
security-destination BN4. When this bundle arrives at BN3, the bundle
blocks are <figure>
<artwork><![CDATA[
primary - PIb - PIa - payload
]]></artwork>
</figure> Block PIb is not destined for this node BN3 so has to be
forwarded. This is the security-destination for block PIa so, after
validation, it should be removed from the bundle. But that will
invalidate the PIb signature when the block is checked at the final
destination. The PIb signature includes the primary block, PIb itself,
PIa and the payload block, so PIa MUST remain in the bundle. This is
why security blocks are treated as a stack and add/remove operations
are permitted only at the top-of-stack.</t>
<t>The situation would be worse if the security concern is
confidentiality, and PCBs are employed, using the confidentiality
ciphersuite #3 ("PC3") described in <xref target="rsaaes"></xref>. In
this scenario, BN1 would encrypt the bundle with BN3 as
security-destination, BN2 would create an overlapping security path by
super-encrypting the payload and encapsulating the PC3 block for
security-destination BN4. BN3 forwards all the blocks without change.
BN4 decrypts the payload from its super-encryption and decapsulates
the PC3 block, only to find that it should have been processed
earlier. Assuming that BN4 has no access to BN3's key store, BN4 has
no way to decrypt the bundle and recover the original content.</t>
<t>As mentioned above, authors of security policy need to use care to
ensure that their policies do not cause overlaps. These guidelines
should prove helpful: <list>
<t>the originator of a bundle can always specify the bundle-dest
as the security-dest, and should be cautious about doing
otherwise</t>
<t>in the "tunnel-mode" scenario where two sub-networks are
connected by a tunnel through a network, the gateways can each
specify the other as security-dest, and should be cautious about
doing otherwise</t>
<t>BAB is never a problem because it is always only a single
hop</t>
<t>PIB for a bundle without PCB will usually specify the bundle
destination as security-dest</t>
<t>PIB for a bundle containing a PCB should specify as its
security-dest the security-dest of the PCB (outermost PCB if there
are more than one)</t>
</list></t>
</section>
<section anchor="C14N" title="Canonicalisation of bundles" toc="default">
<t>In order to verify a signature or MAC on a bundle the exact same
bits, in the exact same order, MUST be input to the calculation upon
verification as were input upon initial computation of the original
signature or MAC value. Consequently, a node MUST NOT change the
encoding of any URI <xref target="RFC3986"></xref> in the dictionary
field, e.g., changing the DNS part of some HTTP URL from lower case to
upper case. Because bundles MAY be modified while in transit (either
correctly or due to implementation errors), a canonical form of any
given bundle (that contains a BAB or PIB) MUST be defined.</t>
<t>This section defines bundle canonicalisation algorithms used in the
<xref target="BABhmac"></xref> and <xref target="PIBrsasha"></xref>
ciphersuites. Other ciphersuites can use these or define their own
canonicalization procedures.</t>
<section anchor="strictC14N" title="Strict canonicalisation"
toc="default">
<t>The first algorithm that can be used permits no changes at all to
the bundle between the security-source and the security-destination.
It is mainly intended for use in BAB ciphersuites. This algorithm
conceptually catenates all blocks in the order presented, but omits
all security result data fields in blocks of this ciphersuite type.
That is, when a BAB ciphersuite specifies this algorithm then we
omit all BAB security results for all BAB ciphersuites, when a PIB
ciphersuite specifies this algorithm then we omit all PIB security
results for all PIB ciphersuites. All security result length fields
are included, even though their corresponding security result data
fields are omitted.</t>
<t>Notes: <list style="empty">
<t>- In the above we specify that security result data is
omitted. This means that no bytes of the security result data
are input. We do not set the security result length to zero.
Rather, we assume that the security result length will be known
to the module that implements the ciphersuite before the
security result is calculated, and require that this value be in
the security result length field even though the security result
data itself will be omitted.</t>
<t>- The 'res' bit of the ciphersuite ID, which indicates
whether or not the security result length and security result
data field are present, is part of the canonical form.</t>
<t>- The value of the block data length field, which indicates
the length of the block, is also part of the canonical form. Its
value indicates the length of the entire bundle when the bundle
includes the security result data field.</t>
<t>- BABs are always added to bundles after PIBs, so when a PIB
ciphersuite specifies this strict canonicalisation algorithm and
the PIB is received with a bundle that also includes one or more
BABs, application of strict canonicalisation as part of the PIB
security result verification process requires that all BABs in
the bundle be ignored entirely.</t>
</list></t>
</section>
<section anchor="mutableC14N" title="Mutable canonicalisation"
toc="default">
<t>This algorithm is intended to protect parts of the bundle which
SHOULD NOT be changed in-transit. Hence it omits the mutable parts
of the bundle.</t>
<t>The basic approach is to define a canonical form of the primary
block and catenate it with the security (PIBs and PCBs only) and
payload blocks in the order that they will be transmitted. This
algorithm ignores all other blocks, including ESBs, because it
cannot be determined whether or not they will change as the bundle
transits the network. In short, this canonicalization protects the
payload, payload-related security blocks and parts of the primary
block.</t>
<t>Many fields in various blocks are stored as variable-length
SDNVs. These are canonicalized in unpacked form, as eight-byte
fixed-width fields in network byte order. The size of eight bytes is
chosen because implementations MAY handle larger values as invalid,
as noted in <xref target="DTNBP"></xref>.</t>
<t>The canonical form of the primary block is shown in <xref
target="primaryc14n"></xref>. Essentially, it de-references the
dictionary block, adjusts lengths where necessary and ignores flags
that MAY change in transit.</t>
<figure anchor="primaryc14n"
title="The canonical form of the primary bundle block">
<preamble></preamble>
<artwork><![CDATA[
+----------------+----------------+----------------+----------------+
| Version | Processing flags (incl. COS and SRR) |
+----------------+----------------+---------------------------------+
| Canonical primary block length |
+----------------+----------------+---------------------------------+
| Destination endpoint ID length |
+----------------+----------------+---------------------------------+
| |
| Destination endpoint ID |
| |
+----------------+----------------+---------------------------------+
| Source endpoint ID length |
+----------------+----------------+----------------+----------------+
| |
| Source endpoint ID |
| |
+----------------+----------------+---------------------------------+
| Report-to endpoint ID length |
+----------------+----------------+----------------+----------------+
| |
| Report-to endpoint ID |
| |
+----------------+----------------+----------------+----------------+
| |
+ Creation Timestamp (2 x SDNV) +
| |
+---------------------------------+---------------------------------+
| Lifetime |
+----------------+----------------+----------------+----------------+
]]></artwork>
</figure>
<t>The fields shown in <xref target="primaryc14n"></xref> are: <list
style="empty">
<t>Version is the single-byte value in the primary block.</t>
<t>Processing flags in the primary block is an SDNV, and
includes the class-of-service (COS) and status report request
(SRR) fields. For purposes of canonicalization, the SDNV is
unpacked into a fixed-width field and some bits are masked out.
The unpacked field is ANDed with mask 0x0000 0000 0007 C1BE to
set to zero all reserved bits and the "bundle is a fragment"
bit.</t>
<t>Length - a four-byte value containing the length (in bytes)
of this structure, in network byte order.</t>
<t>Destination endpoint ID length and value - are the length (as
a four byte value in network byte order) and value of the
destination endpoint ID from the primary bundle block. The URI
is simply copied from the relevant part(s) of the dictionary
block and is not itself canonicalised. Although the dictionary
entries contain null-terminators, the null-terminators are not
included in the length or the canonicalization.</t>
<t>Source endpoint ID length and value are handled similarly to
the destination.</t>
<t>Report-to endpoint ID length and value are handled similarly
to the destination.</t>
<t>Creation time (2 x SDNV) and Lifetime (SDNV) are simply
copied from the primary block, with the SDNV values being
represented as eight-byte unpacked values.</t>
<t>Fragment offset and Total application data unit length are
ignored, as is the case for the "bundle is a fragment" bit
mentioned above. If the payload data to be canonicalized is less
than the complete, original bundle payload, the offset and
length are specified in the security-parameters.</t>
</list></t>
<t>For non-primary blocks being included in the canonicalization,
the block processing flags value used for canonicalization is the
unpacked SDNV value with reserved and mutable bits masked to zero.
The unpacked value is ANDed with mask 0x0000 0000 0000 0077 to zero
reserved bits and the "last block" flag. The "last block" flag is
ignored because BABs and other security blocks MAY be added for some
parts of the journey but not others so the setting of this bit might
change from hop to hop.</t>
<t>Endpoint ID references in security blocks are canonicalized using
the de-referenced text form in place of the reference pair. The
reference count is not included, nor is the length of the endpoint
ID text.</t>
<t>The block-length is canonicalized as an eight-byte unpacked value
in network byte order. If the payload data to be canonicalized is
less than the complete, original bundle payload, this field contain
the size of the data being canonicalized (the "effective block")
rather that the actual size of the block.</t>
<t>Payload blocks are generally canonicalized as-is with the
exception that in some instances only a portion of the payload data
is to be protected. In such a case, only those bytes are included in
the canonical form, and additional ciphersuite parameters are
required to specify which part of the payload is protected, as
discussed further below.</t>
<t>Security blocks are handled likewise, except that the ciphersuite
will likely specify that the "current" security block security
result field not be considered part of the canonical form. This
differs from the strict canonicalisation case since we might use the
mutable canonicalisation algorithm to handle sequential signatures
such that signatures cover earlier ones.</t>
<t>ESBs MUST NOT be included in the canonicalization.</t>
<t>Notes: <list style="empty">
<t>- The canonical form of the bundle is not transmitted. It is
simply an artifact used as input to digesting.</t>
<t>- We omit the reserved flags because we cannot determine if
they will change in transit. The masks specified above will have
to be revised if additional flags are defined and they need to
be protected.</t>
<t>- Our URI encoding does not preserve the "null-termination"
convention from the dictionary field, nor do we separate the
scheme and the scheme-specific part (SSP) as is done there.</t>
<t>- The URI encoding will cause errors if any node rewrites the
dictionary content (e.g. changing the DNS part of an HTTP URL
from lower-case to upper case). This could happen transparently
when a bundle is synched to disk using one set of software and
then read from disk and forwarded by a second set of software.
Because there are no general rules for canonicalising URIs (or
IRIs), this problem may be an unavoidable source of integrity
failures.</t>
<t>- All SDNV fields here are canonicalized as eight-byte
unpacked values in network byte order. Length fields are
canonicalized as four-byte values in network byte order.
Encoding does not need optimization since the values are never
sent over the network.</t>
<t>If a bundle is fragmented before the PIB is applied then the
PIB applies to a fragment and not the entire bundle. However,
the protected fragment could be subsequently further fragmented,
which would leave the verifier unable to know which bytes were
protected by the PIB. Even in the absence of fragmentation the
same situation applies if the ciphersuite is defined to allow
protection of less than the entire, original bundle payload.</t>
<t>For this reason, PIB ciphersuites which support applying a
PIB to less than the complete, original bundle payload MUST
specify, as part of the ciphersuite parameters, which bytes of
the bundle payload are protected. When verification occurs, only
the specified range of the payload bytes are input to PIB
verification. It is valid for a ciphersuite to be specified so
as to only apply to entire bundles and not to fragments. A
ciphersuite MAY be specified to apply to only a portion of the
payload, regardless of whether the payload is a fragment or the
complete original bundle payload.</t>
<t>The same fragmentation issue applies equally to PCB
ciphersuites. Ciphersuites which support applying
confidentiality to fragments MUST specify, as part of the
ciphersuite parameters, which bytes of the bundle payload are
protected. When decrypting a fragment, only the specified bytes
are processed. It is also valid for a confidentiality
ciphersuite to be specified so as to only apply to entire
bundles and not to fragments.</t>
</list></t>
<t>This definition of mutable canonicalization assumes that endpoint
IDs themselves are immutable and is unsuitable for use in
environments where that assumption might be violated.</t>
<t>The canonicalization applies to a specific bundle and not a
specific payload. If a bundle is forwarded in some way, the
recipient is not able to verify the original integrity signature
since the the source EID will be different, and possibly other
fields.</t>
<t>The solution for either of these issues is to define and use a
PIB ciphersuite having an alternate version of mutable
canonicalization any fields from the primary block.</t>
</section>
</section>
<section anchor="srcPCB" title="Endpoint ID confidentiality"
toc="default">
<t>Every bundle MUST contain a primary block that contains the source
and destinations endpoint IDs, and others, and that cannot be
encrypted. If endpoint ID confidentiality is required, then
bundle-in-bundle encapsulation can solve this problem in some
instances.</t>
<t>Similarly, confidentiality requirements MAY also apply to other
parts of the primary block (e.g. the current-custodian) and that is
supported in the same manner.</t>
</section>
<section anchor="sec.bon" title="Bundles received from other nodes"
toc="default">
<t>Nodes implementing this specification SHALL consult their security
policy to determine whether or not a received bundle is required by
policy to include a BAB. If the bundle has no BAB and one is not
required then BAB processing on the received bundle is complete and
the bundle is ready to be further processed for PIB/PCB/ESB handling
or delivery or forwarding.</t>
<t>If the bundle is required to have a BAB but does not, then the
bundle MUST be discarded and processed no further. If the bundle is
required to have a BAB but all of its BABs identify a different node
other than the receiving node as the BAB security destination, then
the bundle MUST be discarded and processed no further.</t>
<t>If the bundle is required to have a BAB and has one or more BABs
that identify the receiving node as the BAB security destination, or
for which there is no security destination, then the value in the
security result field(s) of the BAB(s) MUST be verified according to
the ciphersuite specification. If for all such BABs in the bundle
either the BAB security source cannot be determined or the security
result value check fails, the bundle has failed to authenticate and
the bundle MUST be discarded and processed no further. If any of the
BABs present verify, or if a BAB is not required, the bundle is ready
for further processing as determined by extension blocks and/or
policy.</t>
<t>BABs received in a bundle MUST be stripped before the bundle is
forwarded. New BABs MAY be added as required by policy. This MAY
require correcting the "last block" field of the to-be-forwarded
bundle.</t>
<t>Further processing of the bundle MUST take place in the order
indicated by the various blocks from the primary block to the payload
block, except as defined by an applicable specification.</t>
<t>If the bundle has a PCB and the receiving node is the PCB
destination for the bundle (either because the node is listed as the
bundle's PCB-dest or because the node is listed as the bundle's
destination and there is no PCB-dest), the node MUST decrypt the
relevant parts of the bundle in accordance with the ciphersuite
specification. The PCB SHALL be deleted. If the relevant parts of the
bundle cannot be decrypted (i.e. the decryption key cannot be deduced
or decryption fails), then the bundle MUST be discarded and processed
no further; in this case a bundle deletion status report (see the
Bundle Protocol <xref target="DTNBP"></xref>) indicating the
decryption failure MAY be generated. If the PCB security result
included the ciphertext of a block other than the payload block, the
recovered plaintext block MUST be placed in the bundle at the location
from which the PCB was deleted.</t>
<t>If the bundle has one or more PIBs for which the receiving node is
the bundle's PIB destination (either because the node is listed in the
bundle's PIB-dest or because the node is listed as the bundle's
destination and there is no PIB-dest), the node MUST verify the value
in the PIB security result field(s) in accordance with the ciphersuite
specification. If all the checks fail, the bundle has failed to
authenticate and the bundle SHALL be processed according to the
security policy. A bundle status report indicating the failure MAY be
generated. Otherwise, if the PIB verifies, the bundle is ready to be
processed for either delivery or forwarding. Before forwarding the
bundle, the node SHOULD remove the PIB from the bundle, subject to the
requirements of <xref target="sec.stack"></xref>, unless it is likely
that some downstream node will also be able to verify the PIB.</t>
<t>If the bundle has a PIB and the receiving node is not the bundle's
PIB-dest the receiving node MAY attempt to verify the value in the
security result field. If it is able to check and the check fails, the
node SHALL discard the bundle and it MAY send a bundle status report
indicating the failure.</t>
<t>If the bundle has an ESB and the receiving node is the ESB
destination for the bundle (either because the node is listed as the
bundle's ESB-dest or because the node is listed as the bundle's
destination and there is no ESB-dest), the node MUST decrypt and/or
decapsulate the encapsulated block in accordance with the ciphersuite
specification. The decapsulated block replaces the ESB in the bundle
block sequence, and the ESB is thereby deleted. If the content cannot
be decrypted (i.e., the decryption key cannot be deduced or decryption
fails), then the bundle MAY be discarded and processed no further
unless the security policy specifies otherwise. In this case a bundle
deletion status report (see the Bundle Protocol <xref
target="DTNBP"></xref>) indicating the decryption failure MAY be
generated.</t>
</section>
<section title="The At-Most-Once-Delivery Option" toc="default">
<t>An application MAY request (in an implementation specific manner)
that a node be registered as a member of an endpoint and that received
bundles destined for that endpoint be delivered to that
application.</t>
<t>An option for use in such cases is known as
"at-most-once-delivery". If this option is chosen, the application
indicates that it wants the node to check for duplicate bundles,
discard duplicates, and deliver at most one copy of each received
bundle to the application. If this option is not chosen, the
application indicates that it wants the node to deliver all received
bundle copies to the application. If this option is chosen, the node
SHALL deliver at most one copy of each received bundle to the
application. If the option is not chosen, the node SHOULD, subject to
policy, deliver all bundles.</t>
<t>To enforce this the node MUST look at the source/timestamp pair
value of each complete (reassembled, if necessary) bundle received and
determine if this pair, which uniquely identifies a bundle, has been
previously received. If it has, then the bundle is a duplicate. If it
has not, then the bundle is not a duplicate. The source/timestamp pair
SHALL be added to the list of pair values already received by that
node.</t>
<t>Each node implementation MAY decide how long to maintain a table of
pair value state.</t>
<!--
Took this out to avoid the downref. I (SF) think this isn't really
needed as there's nothing normative involved.
<t>Additional discussion relevant to at-most-once-delivery is in the
DTN Retransmission Block specification <xref target="DTNRB"/>.</t>
-->
</section>
<section anchor="frag" title="Bundle Fragmentation and Reassembly"
toc="default">
<t>If it is necessary for a node to fragment a bundle and security
services have been applied to that bundle, the fragmentation rules
described in <xref target="DTNBP"></xref> MUST be followed. As defined
there and repeated here for completeness, only the payload MAY be
fragmented; security blocks, like all extension blocks, can never be
fragmented. In addition, the following security-specific processing is
REQUIRED:</t>
<t>The security policy requirements for a bundle MUST be applied
individually to all the bundles resulting from a fragmentation
event.</t>
<t>If the original bundle contained a PIB, then each of the PIB
instances MUST be included in some fragment.</t>
<t>If the original bundle contained one or more PCBs, then any PCB
instances containing a key information item MUST have the "replicate
in every fragment" flag set, and thereby be replicated in every
fragment. This is to ensure that the canonical block-sequence can be
recovered during reassembly.</t>
<t>If the original bundle contained one or more correlated PCBs not
containing a key information item, then each of these MUST be included
in some fragment, but SHOULD NOT be sent more than once. They MUST be
placed in a fragment in accordance with the fragmentation rules
described in <xref target="DTNBP"></xref>.</t>
<t>Note: various fragments MAY have additional security blocks added
at this or later stages and it is possible that correlators will
collide. In order to facilitate uniqueness, ciphersuites SHOULD
include the fragment-offset of the fragment as a high-order component
of the correlator.</t>
</section>
<section anchor="reactive" title="Reactive fragmentation" toc="default">
<t>When a partial bundle has been received, the receiving node SHALL
consult its security policy to determine if it MAY fragment the
bundle, converting the received portion into a bundle fragment for
further forwarding. Whether or not reactive fragmentation is permitted
SHALL depend on the security policy and the ciphersuite used to
calculate the BAB authentication information, if required. (Some BAB
ciphersuites, i.e., the mandatory BAB-HMAC ciphersuite defined in
<xref target="BABhmac"></xref>, do not accommodate reactive
fragmentation because the security result in the BAB requires that the
entire bundle be signed. It is conceivable, however, that a BAB
ciphersuite could be defined such that multiple security results are
calculated, each on a different segment of a bundle, and that these
security results could be interspersed between bundle payload segments
such that reactive fragmentation could be accommodated.)</t>
<t>If the bundle is reactively fragmented by the intermediate receiver
and the BAB-ciphersuite is of an appropriate type (e.g. with multiple
security results embedded in the payload), the bundle MUST be
fragmented immediately after the last security result value in the
partial payload that is received. Any data received after the last
security result value MUST be dropped.</t>
<t>If a partial bundle is received at the intermediate receiver and is
reactively fragmented and forwarded, only the part of the bundle that
was not received MUST be retransmitted, though more of the bundle MAY
be retransmitted. Before retransmitting a portion of the bundle, it
SHALL be changed into a fragment and, if the original bundle included
a BAB, the fragmented bundle MUST also, and its BAB SHALL be
recalculated.</t>
<t>This specification does not currently define any ciphersuite which
can handle this reactive fragmentation case.</t>
<t>An interesting possibility is a ciphersuite definition such that
the transmission of a follow-up fragment would be accompanied by the
signature for the payload up to the restart point.</t>
</section>
<section title="Attack Model" toc="default">
<t>An evaluation of resilience to cryptographic attack necessarily
depends upon the algorithms chosen for bulk data protection and for
key transport. The mandatory ciphersuites described in the following
section use AES, RSA and SHA algorithms in ways that are believed to
be reasonably secure against ciphertext-only, chosen-ciphertext,
known-plaintext and chosen-plaintext attacks.</t>
<t>The design has been careful to preserve the resilience of the
algorithms against attack. For example, if a message is encrypted then
any message integrity signature is also encrypted so that guesses
cannot be confirmed.</t>
</section>
</section>
<section anchor="ciphersuites" title="Mandatory Ciphersuites"
toc="default">
<t>This section defines the mandatory ciphersuites for this
specification. There is currently one mandatory ciphersuite for use with
each of the security block types BAB, PIB, PCB and ESB. The BAB
ciphersuite is based on shared secrets using HMAC. The PIB ciphersuite
is based on digital signatures using RSA with SHA-256. The PCB and ESB
ciphersuites are based on using RSA for key transport and AES for bulk
encryption.</t>
<t>In all uses of CMS eContent in this specification the relevant
eContentType to be used is id-data as specified in <xref
target="RFC5652"></xref> .</t>
<t>The ciphersuites use the mechanisms defined in Cryptographic Message
Syntax (CMS) <xref target="RFC5652"></xref> for packaging the keys,
signatures, etc for transport in the appropriate security block. The
data in the CMS object is not the bundle data, as would be the typical
usage for CMS. Rather, the "message data" packaged by CMS is the
ephemeral key, message digest, etc used in the core code of the
ciphersuite.</t>
<t>In all cases where we use CMS, implementations SHOULD NOT include
additional attributes whether signed or unsigned, authenticated or
unauthenticated.</t>
<section anchor="BABhmac" title="BAB-HMAC" toc="default">
<t>The BAB-HMAC ciphersuite has ciphersuite ID value 0x001.</t>
<t>BAB-HMAC uses the strict canonicalisation algorithm in <xref
target="strictC14N"></xref>.</t>
<t>Strict canonicalization supports digesting of a fragment-bundle. It
does not permit the digesting of only a subset of the payload, but
only the complete contents of the payload of the current bundle, which
might be a fragment. The "fragment range" item for security-parameters
is not used to indicate a fragment, as this information is digested
within the primary block.</t>
<t>The variant of HMAC to be used is HMAC-SHA1 as defined in <xref
target="RFC2104"></xref>.</t>
<t>This ciphersuite requires the use of two related instances of the
BAB. It involves placing the first BAB instance (as defined in <xref
target="sec.BAB"></xref>) just after the primary block. The second
(correlated) instance of the BAB MUST be placed after all other blocks
(except possibly other BAB blocks) in the bundle.</t>
<t>This means that normally, the BAB will be the second and last
blocks of the bundle. If a forwarder wishes to apply more than one
correlated BAB pair, then this can be done. There is no requirement
that each application "wrap" the others, but the forwarder MUST insert
all the "up front" BABs, and their "at back" "partners" (without any
security result), before canonicalising.</t>
<t>Inserting more than one correlated BAB pair would be useful if the
bundle could be routed to more than one potential "next-hop" or if
both an old or a new key were valid at sending time, with no certainty
about the situation that will obtain at reception time.</t>
<t>The security result is the output of the HMAC-SHA1 calculation with
input being the result of running the entire bundle through the strict
canonicalisation algorithm. Both required BAB instances MUST be
included in the bundle before canonicalisation.</t>
<t>Security parameters are OPTIONAL with this scheme, but if used then
the only field that can be present is key information (see <xref
target="sec.PRF"></xref>).</t>
<t>In the absence of key information the receiver is expected to be
able to find the correct key based on the sending identity. The
sending identity MAY be known from the security-source field or the
content of a previous-hop block in the bundle. It MAY also be
determined using implementation-specific means such as the convergence
layer.</t>
</section>
<section anchor="PIBrsasha" title="PIB-RSA-SHA256" toc="default">
<t>The PIB-RSA-SHA256 ciphersuite has ciphersuite ID value 0x02.</t>
<t>PIB-RSA-SHA256 uses the mutable canonicalisation algorithm <xref
target="mutableC14N"></xref>, with the security-result data field for
only the "current" block being excluded from the canonical form. The
resulting canonical form of the bundle is the input to the signing
process. This ciphersuite requires the use of a single instance of the
PIB.</t>
<t>Because the signature field in SignedData SignatureValue is a
security-result field, the entire key information item MUST be placed
in the block's security-result field, rather than
security-parameters.</t>
<t>If the bundle being signed has been fragmented before signing, then
we have to specify which bytes were signed in case the signed bundle
is subsequently fragmented for a second time. If the bundle is a
fragment, then the ciphersuite parameters MUST include a
fragment-range field, as described in <xref target="sec.PRF"></xref>,
specifying the offset and length of the signed fragment. If the entire
bundle is signed then these numbers MUST be omitted.</t>
<t>Implementations MUST support use of "SignedData" type as defined in
<xref target="RFC5652"></xref> section 5.1, with SignerInfo type
SignerIdentifier containing the issuer and serial number of a suitable
certificate. The data to be signed is the output of the SHA256 mutable
canonicalization process.</t>
<t>RSA is used with SHA256 as specified for the id-sha256 signature
scheme in <xref target="RFC4055"></xref> Section 5. The output of the
signing process is the SignatureValue field for the PIB.</t>
<t>"Commensurate strength" cryptography is generally held to be a good
idea. A combination of RSA with SHA-256 is reckoned to require a 3076
bit RSA key according to this logic. Few implementations will choose
this length by default (and probably some just won't support such long
keys). Since this is an experimental protocol, we expect that 1024 or
2048 bit RSA keys will be used in many cases, and that that will be
fine since we also expect that the hash function "issues" will be
resolved before any standard would be derived from this protocol.</t>
</section>
<section anchor="rsaaes" title="PCB-RSA-AES128-PAYLOAD-PIB-PCB"
toc="default">
<t>The PCB-RSA-AES128-PAYLOAD-PIB-PCB ciphersuite has ciphersuite ID
value 0x003.</t>
<t>This scheme encrypts PIBs, PCBs and the payload. The key size for
this ciphersuite is 128 bits.</t>
<t>Encryption is done using the AES algorithm in Galois/Counter Mode
(GCM) as described in <xref target="RFC5084"></xref> Note: parts of
the following description are borrowed from <xref
target="RFC4106"></xref>.</t>
<t>The choice of GCM avoids expansion of the payload, which causes
problems with fragmentation/reassembly and custody transfer. GCM also
includes authentication, essential in preventing attacks that can
alter the decrypted plaintext or even recover the encryption key.</t>
<t>GCM is a block cipher mode of operation providing both
confidentiality and data integrity. The GCM encryption operation has
four inputs: a secret key, an initialization vector (IV), a plaintext,
and an input for additional authenticated data (AAD) which is not used
here. It has two outputs, a ciphertext whose length is identical to
the plaintext, and an authentication tag, also known as the Integrity
Check Value (ICV).</t>
<t>For consistency with the description in <xref
target="RFC5084"></xref>, we refer to the GCM IV as a nonce. The same
key and nonce combination MUST NOT be used more than once. The nonce
has the following layout</t>
<figure anchor="nonce"
title="Nonce Format for PCB-RSA-AES128-PAYLOAD-PIB-PCB">
<preamble></preamble>
<artwork><![CDATA[
+----------------+----------------+----------------+----------------+
| salt |
+----------------+----------------+----------------+----------------+
| |
| initialization vector |
| |
+----------------+----------------+----------------+----------------+
]]></artwork>
</figure>
<t>The salt field is a four-octet value, usually chosen at random. It
MUST be the same for all PCBs which have the same correlator value.
The salt need not be kept secret.</t>
<t>The initialization vector (IV) is an eight-octet value, usually
chosen at random. It MUST be different for all PCBs which have the
same correlator value. The value need not be kept secret.</t>
<t>The key (bundle encryption key, BEK) is a sixteen-octet (128 bits)
value, usually chosen at random. The value MUST be kept secret, as
described below.</t>
<t>The integrity check value is a sixteen-octet value used to verify
that the protected data has not been altered. The value need not be
kept secret.</t>
<t>This ciphersuite requires the use of a single PCB instance to deal
with payload confidentiality. If the bundle already contains PIBs or
PCBs then the ciphersuite will create additional correlated blocks to
protect these PIBs and PCBs. These "additional" blocks replace the
original blocks on a one-for-one basis, so the number of blocks
remains unchanged. All these related blocks MUST have the same
correlator value. The term "first PCB" in this section refers to the
single PCB if there is only one or, if there are several, then to the
one containing the key information. This MUST be the first of the
set.</t>
<t>First PCB - the first PCB MAY contain a correlator value, and MAY
specify security-source and/or security-destination in the EID-list.
If not specified, the bundle-source and bundle-destination
respectively are used for these values, as with other ciphersuites.
The block MUST contain security-parameters and security-result fields.
Each field MAY contain several items formatted as described in <xref
target="sec.PRF"></xref>.</t>
<t>Security-parameters <list style="empty">
<t>key information</t>
<t>salt</t>
<t>IV (this instance applies only to payload)</t>
<t>fragment offset and length, if bundle is a fragment</t>
</list></t>
<t>Security-result <list style="empty">
<t>ICV</t>
</list></t>
<t>Subsequent PCBs MUST contain a correlator value to link them to the
first PCB. Security-source and security-destination are implied from
the first PCB, however see the discussion in <xref
target="sec.PCB"></xref> concerning EID-list entries. They MUST
contain security-parameters and security-result fields as follows:</t>
<t>Security-parameters <list style="empty">
<t>IV for this specific block</t>
</list></t>
<t>Security-result <list style="empty">
<t>encapsulated block</t>
</list></t>
<t>The security-parameters and security-result fields in the
subsequent PCBs MUST NOT contain any items other than these two. Items
such as key and salt are supplied in the first PCB and MUST NOT be
repeated.</t>
<t>Implementations MUST support use of "Enveloped-data" type as
defined in <xref target="RFC5652"></xref> section 6, with
RecipientInfo type KeyTransRecipientInfo containing the issuer and
serial number of a suitable certificate. They MAY support additional
RecipientInfo types. The "encryptedContent" field in
EncryptedContentInfo contains the encrypted BEK that protects the
payload and certain security blocks of the bundle.</t>
<t>The Integrity Check Value from the AES-GCM encryption of the
payload is placed in the security-result field of the first PCB.</t>
<t>If the bundle being encrypted is a fragment-bundle we have to
specify which bytes are encrypted in case the bundle is subsequently
fragmented again. If the bundle is a fragment the ciphersuite
parameters MUST include a fragment-range field, as described in <xref
target="sec.PRF"></xref>, specifying the offset and length of the
encrypted fragment. Note that this is not the same pair of fields
which appear in the primary block as "offset and length". The "length"
in this case is the length of the fragment, not the original length.
If the bundle is not a fragment then this field MUST be omitted.</t>
<t>The confidentiality processing for payload and other blocks is
different, mainly because the payload might be fragmented later at
some other node.</t>
<t>For the payload, only the bytes of the bundle payload field are
affected, being replaced by ciphertext. The salt, IV and key values
specified in the first PCB are used to encrypt the payload, and the
resultant authentication tag (ICV) is placed in an ICV item in the
security-result field of that first PCB. The other bytes of the
payload block, such as type, flags and length, are not modified.</t>
<t>For each PIB or PCB to be protected, the entire original block is
encapsulated in a "replacing" PCB. This replacing PCB is placed in the
outgoing bundle in the same position as the original block, PIB or
PCB. As mentioned above, this is one-for-one replacement and there is
no consolidation of blocks or mixing of data in any way.</t>
<t>The encryption process uses AES-GCM with the salt and key values
from the first PCB, and an IV unique to this PCB. The process creates
ciphertext for the entire original block, and an authentication tag
for validation at the security destination. For this encapsulation
process, unlike the processing of the bundle payload, the
authentication tag is appended to the ciphertext for the block and the
combination is stored into the "encapsulated block" item in
security-result.</t>
<t>The replacing block, of course, also has the same correlator value
as the first PCB with which it is associated. It also contains the
block-specific IV in security-parameters, and the combination of
original-block-ciphertext and authentication tag, stored as an
"encapsulated block" item in security-result.</t>
<t>If the payload was fragmented after encryption then all those
fragments MUST be present and reassembled before decryption. This
process might be repeated several times at different destinations if
multiple fragmentation actions have occurred.</t>
<t>The size of the GCM counter field limits the payload size to 2^39 -
256 bytes, about half a terabyte. A future revision of this
specification will address the issue of handling payloads in excess of
this size.</t>
</section>
<section anchor="ESBrsaaes" title="ESB-RSA-AES128-EXT" toc="default">
<t>The ESB-RSA-AES128-EXT ciphersuite has ciphersuite ID value
0x004.</t>
<t>This scheme encrypts non-payload-related blocks. It MUST NOT be
used to encrypt PIBs, PCBs or primary or payload blocks. The key size
for this ciphersuite is 128 bits.</t>
<t>Encryption is done using the AES algorithm in Galois/Counter Mode
(GCM) as described in <xref target="RFC5084"></xref> Note: parts of
the following description are borrowed from <xref
target="RFC4106"></xref>.</t>
<t>GCM is a block cipher mode of operation providing both
confidentiality and data origin authentication. The GCM authenticated
encryption operation has four inputs: a secret key, an initialization
vector (IV), a plaintext, and an input for additional authenticated
data (AAD) which is not used here. It has two outputs, a ciphertext
whose length is identical to the plaintext, and an authentication tag,
also known as the Integrity Check Value (ICV).</t>
<t>For consistency with the description in <xref
target="RFC5084"></xref>, we refer to the GCM IV as a nonce. The same
key and nonce combination MUST NOT be used more than once. The nonce
has the following layout</t>
<figure anchor="nonceESB" title="Nonce Format for ESB-RSA-AES128-EXT">
<preamble></preamble>
<artwork><![CDATA[
+----------------+----------------+---------------------------------+
| salt |
+----------------+----------------+---------------------------------+
| |
| initialization vector |
| |
+----------------+----------------+---------------------------------+
]]></artwork>
</figure>
<t>The salt field is a four-octet value, usually chosen at random. It
MUST be the same for all ESBs which have the same correlator value.
The salt need not be kept secret.</t>
<t>The initialization vector (IV) is an eight-octet value, usually
chosen at random. It MUST be different for all ESBs which have the
same correlator value. The value need not be kept secret.</t>
<t>The data encryption key is a sixteen-octet (128 bits) value,
usually chosen at random. The value MUST be kept secret, as described
below.</t>
<t>The integrity check value is a sixteen-octet value used to verify
that the protected data has not been altered. The value need not be
kept secret.</t>
<t>This ciphersuite replaces each BP extension block to be protected
with a "replacing" ESB, and each can be individually specified.</t>
<t>If a number of related BP extension blocks are to be protected they
can be grouped as a correlated set and protected using a single key.
These blocks replace the original blocks on a one-for-one basis, so
the number of blocks remains unchanged. All these related blocks MUST
have the same correlator value. The term "first ESB" in this section
refers to the single ESB if there is only one or, if there are
several, then to the one containing the key or key-identifier. This
MUST be the first of the set. If the blocks are individually specified
then there is no correlated set and each block is its own "first
ESB".</t>
<t>First ESB - the first ESB MAY contain a correlator value, and MAY
specify security-source and/or security-destination in the EID-list.
If not specified, the bundle-source and bundle-destination
respectively are used for these values, as with other ciphersuites.
The block MUST contain security-parameters and security-result fields.
Each field MAY contain several items formatted as described in <xref
target="sec.PRF"></xref>.</t>
<t>Security-parameters <list style="empty">
<t>key information</t>
<t>salt</t>
<t>IV for this specific block</t>
<t>block type of encapsulated block (OPTIONAL)</t>
</list></t>
<t>Security-result <list style="empty">
<t>encapsulated block</t>
</list></t>
<t>Subsequent ESBs MUST contain a correlator value to link them to the
first ESB. Security-source and security-destination are implied from
the first ESB, however see the discussion in <xref
target="sec.PCB"></xref> concerning EID-list entries. Subsequent ESBs
MUST contain security-parameters and security-result fields as
follows:</t>
<t>Security-parameters <list style="empty">
<t>IV for this specific block</t>
<t>block type of encapsulated block (OPTIONAL)</t>
</list></t>
<t>Security-result <list style="empty">
<t>encapsulated block</t>
</list></t>
<t>The security-parameters and security-result fields in the
subsequent ESBs MUST NOT contain any items other than those listed.
Items such as key and salt are supplied in the first ESB and MUST NOT
be repeated.</t>
<t>Implementations MUST support use of "Enveloped-data" type as
defined in <xref target="RFC5652"></xref> section 6, with
RecipientInfo type KeyTransRecipientInfo containing the issuer and
serial number of a suitable certificate. They MAY support additional
RecipientInfo types. The "encryptedContent" field in
EncryptedContentInfo contains the encrypted BEK used to encrypt the
content of the block being protected.</t>
<t>For each block to be protected, the entire original block is
encapsulated in a "replacing" ESB. This replacing ESB is placed in the
outgoing bundle in the same position as the original block. As
mentioned above, this is one-for-one replacement and there is no
consolidation of blocks or mixing of data in any way.</t>
<t>The encryption process uses AES-GCM with the salt and key values
from the first ESB, and an IV unique to this ESB. The process creates
ciphertext for the entire original block, and an authentication tag
for validation at the security destination. The authentication tag is
appended to the ciphertext for the block and the combination is stored
into the "encapsulated block" item in security-result.</t>
<t>The replacing block, of course, also has the same correlator value
as the first ESB with which it is associated. It also contains the
block-specific IV in security-parameters, and the combination of
original-block-ciphertext and authentication tag, stored as an
"encapsulated block" item in security-result.</t>
</section>
</section>
<section anchor="sec.keymgmt" title="Key Management" toc="default">
<t>Key management in delay tolerant networks is recognized as a
difficult topic and is one that this specification does not attempt to
solve. However, solely in order to support implementation and testing,
implementations SHOULD support: <list style="empty">
<t>- The use of well-known RSA public keys for all ciphersuites.</t>
<t>- Long-term pre-shared-symmetric keys for the BAB-HMAC
ciphersuite.</t>
</list></t>
<t>Since endpoint IDs are URIs and URIs can be placed in X.509 <xref
target="RFC5280"></xref> public key certificates (in the subjectAltName
extension) implementations SHOULD support this way of distributing
public keys. RFC 5280 does not insist that implementations include
revocation checking. In the context of a DTN, it is reasonably likely
that some nodes would not be able to use revocation checking services
(either CRLs or OCSP) and deployments SHOULD take this into account when
planning any public key infrastructure to support this
specification.</t>
</section>
<section anchor="sec.Defaults" title="Default Security Policy"
toc="default">
<t>Every node serves as a Policy Enforcement Point insofar as it
enforces some policy that controls the forwarding and delivery of
bundles via one or more convergence layer protocol implementation.
Consequently, every node SHALL have and operate according to its own
configurable security policy, whether the policy be explicit or default.
The policy SHALL specify: <list style="empty">
<t>Under what conditions received bundles SHALL be forwarded.</t>
<t>Under what conditions received bundles SHALL be required to
include valid BABs.</t>
<t>Under what conditions the authentication information provided in
a bundle's BAB SHALL be deemed adequate to authenticate the
bundle.</t>
<t>Under what conditions received bundles SHALL be required to have
valid PIBs and/or PCBs.</t>
<t>Under what conditions the authentication information provided in
a bundle's PIB SHALL be deemed adequate to authenticate the
bundle.</t>
<t>Under what conditions a BAB SHALL be added to a received bundle
before that bundle is forwarded.</t>
<t>Under what conditions a PIB SHALL be added to a received bundle
before that bundle is forwarded.</t>
<t>Under what conditions a PCB SHALL be added to a received bundle
before that bundle is forwarded.</t>
<t>Under what conditions an ESB SHALL be applied to one or more
blocks in a received bundle before that bundle is forwarded.</t>
<t>The actions that SHALL be taken in the event that a received
bundle does not meet the receiving node's security policy
criteria.</t>
</list></t>
<t>This specification does not address how security policies get
distributed to nodes. It only REQUIRES that nodes have and enforce
security policies.</t>
<t>If no security policy is specified at a given node, or if a security
policy is only partially specified, that node's default policy regarding
unspecified criteria SHALL consist of the following: <list style="empty">
<t>Bundles that are not well-formed do not meet the security policy
criteria.</t>
<t>The mandatory ciphersuites MUST be used.</t>
<t>All bundles received MUST have a BAB which MUST be verified to
contain a valid security result. If the bundle does not have a BAB,
then the bundle MUST be discarded and processed no further; a bundle
status report indicating the authentication failure MAY be
generated.</t>
<t>No received bundles SHALL be required to have a PIB; if a
received bundle does have a PIB, however, the PIB can be ignored
unless the receiving node is the PIB-dest, in which case the PIB
MUST be verified.</t>
<t>No received bundles SHALL be required to have a PCB; if a
received bundle does have a PCB, however, the PCB can be ignored
unless the receiving node is the PCB-dest, in which case the PCB
MUST be processed. If processing of a PCB yields a PIB, that PIB
SHALL be processed by the node according to the node's security
policy.</t>
<t>A PIB SHALL NOT be added to a bundle before sourcing or
forwarding it.</t>
<t>A PCB SHALL NOT be added to a bundle before sourcing or
forwarding it.</t>
<t>A BAB MUST always be added to a bundle before that bundle is
forwarded.</t>
<t>If a destination node receives a bundle that has a PIB-dest but
the value in that PIB-dest is not the EID of the destination node,
the bundle SHALL be delivered at that destination node.</t>
<t>If a destination node receives a bundle that has an ESB-dest but
the value in that ESB-dest is not the EID of the destination node,
the bundle SHALL be delivered at that destination node.</t>
<t>If a received bundle does not satisfy the node's security policy
for any reason, then the bundle MUST be discarded and processed no
further; in this case, a bundle deletion status report (see the
Bundle Protocol <xref target="DTNBP"></xref>) indicating the failure
MAY be generated.</t>
</list></t>
</section>
<section title="Security Considerations">
<t>The Bundle Security Protocol builds upon much work of others, in
particular the Cryptographic Message Syntax (CMS) <xref
target="RFC5652"></xref> and Internet X.509 Public Key Infrastructure
Certificate and Certificate Revocation List (CRL) Profile <xref
target="RFC5280"></xref>. The security considerations in these two
documents apply here as well.</t>
<t>Several documents specifically consider the use of Galois/Counter
Mode(GCM) and of AES and are important to consider when building
ciphersuites. These are The Use of Galois/Counter Mode (GCM) in IPsec
Encapsulating Security Payload (ESP) <xref target="RFC4106"></xref> and
Using AES-CCM and AES-GCM Authenticated Encryption in the Cryptographic
Message Syntax (CMS) <xref target="RFC5084"></xref>. Although the BSP is
not identical, many of the security issues considered in these documents
also apply here.</t>
<t>Certain applications of DTN need to both sign and encrypt a message
and there are security issues to consider with this.</t>
<t>If the intent is to provide an assurance that a message did in fact
come from a specific source and has not been changed then it should be
signed first and then encrypted. A signature on an encrypted message
does not establish any relationship between the signer and the original
plaintext message.</t>
<t>On the other hand, if the intent is reduce the threat of
denial-of-service attacks then signing the encrypted message is
appropriate. A message that fails the signature check will not be
processed through the computationally-intensive decryption pass. A more
extensive discussion of these points is in S/MIME 3.2 Message
Specification <xref target="RFC5751"></xref>, especially in section
3.6.</t>
<t>Additional details relating to these combinations can be found at
<xref target="sec.PIBPCBcombos"></xref> where it is RECOMMENDED that the
encrypt-then-sign combination is usually appropriate for usage in a
DTN.</t>
<t>In a DTN encrypt-then-sign potentially allows intermediate nodes to
verify a signature (over the ciphertext) and thereby apply policy to
manage possibly scarce storage or other resources at intermediate nodes
in the path the bundle takes from source to destination EID.</t>
<t>An encrypt-then-sign scheme doesn't further expose identity in most
cases since the BP mandates that the source EID (which is commonly
expected to be the security-source) is already exposed in the primary
block of the bundle. Should either exposure of the source EID or
signerInfo be considered an interesting vulnerability, then some form of
bundle-in-bundle encapsulation would be required as a mitigation.</t>
<t>If a BAB ciphersuite uses digital signatures but doesn't include the
security destination (which for a BAB is the next host), then this
allows the bundle to be sent to some node other than the intended
adjacent node. Because the BAB will still authenticate, the receiving
node might erroneously accept and forward the bundle. When asymmetric
BAB ciphersuites are used, the security destination field SHOULD
therefore be included in the BAB.</t>
<t>If a bundle's PIB-dest is not the same as its destination, then some
node other than the destination (the node identified as the PIB-dest) is
expected to validate the PIB security result while the bundle is en
route. However, if for some reason the PIB is not validated, there is no
way for the destination to become aware of this. Typically, a PIB-dest
will remove the PIB from the bundle after verifying the PIB and before
forwarding it. However, if there is a possibility that the PIB will also
be verified at a downstream node, the PIB-dest will leave the PIB in the
bundle. Therefore, if a destination receives a bundle with a PIB that
has a PIB-dest (which isn't the destination), this might, but does not
necessarily, indicate a possible problem.</t>
<t>If a bundle is fragmented after being forwarded by its PIB-source but
before being received by its PIB-dest, the payload in the bundle MUST be
reassembled before validating the PIB security result in order for the
security result to validate correctly. Therefore, if the PIB-dest is not
capable of performing payload reassembly, its utility as a PIB-dest will
be limited to validating only those bundles that have not been
fragmented since being forwarded from the PIB-source. Similarly, if a
bundle is fragmented after being forwarded by its PIB-source but before
being received by its PIB-dest, all fragments MUST be received at that
PIB-dest in order for the bundle payload to be able to be reassembled.
If not all fragments are received at the PIB-dest node, the bundle will
not be able to be authenticated, and will therefore never be forwarded
by this PIB-dest node.</t>
<t>Specification of a security-destination other than the bundle
destination creates a routing requirement that the bundle somehow be
directed to the security-destination node on its way to the final
destination. This requirement is presently private to the ciphersuite,
since routing nodes are not required to implement security
processing.</t>
<t>If a security target were to generate reports in the event that some
security validation step fails, then that might leak information about
the internal structure or policies of the DTN containing the security
target. This is sometimes considered bad security practice so SHOULD
only be done with care.</t>
</section>
<section title="Conformance" toc="default">
<t>As indicated above, this document describes both BSP and
ciphersuites. A conformant implementation MUST implement both BSP
support and the four ciphersuites described in <xref
target="ciphersuites"></xref>. It MAY also support other
ciphersuites.</t>
<t>Implementations that support BSP but not all four mandatory
ciphersuites MUST claim only "restricted compliance" with this
specification, even if they provide other ciphersuites.</t>
<t>All implementations are strongly RECOMMENDED to provide at least a
BAB ciphersuite. A relay node, for example, might not deal with
end-to-end confidentiality and data integrity but it SHOULD exclude
unauthorized traffic and perform hop-by-hop bundle verification.</t>
</section>
<section anchor="iana" title="IANA Considerations" toc="default">
<t>This protocol has fields requiring registries managed by IANA.</t>
<section title="Bundle Block Types" toc="default">
<t>This specification allocates four codepoints from the existing
Bundle Block Type Codes registry defined in <xref
target="I-D.irtf-dtnrg-iana-bp-registries"></xref>.</t>
<figure>
<preamble></preamble>
<artwork><![CDATA[
Additional Entries for the Bundle Block Type Codes Registry:
+-------+--------------------------------------+----------------+
| Value | Description | Reference |
+-------+--------------------------------------+----------------+
| 2 | Bundle Authentication Block | This document |
| 3 | Payload Integrity Block | This document |
| 4 | Payload Confidentiality Block | This document |
| 9 | Extension Security Block | This document |
+-------+--------------------------------------+----------------+
]]></artwork>
</figure>
</section>
<section title="Ciphersuite Numbers" toc="default">
<t>This Protocol has a ciphersuite number field and certain
ciphersuites are defined. An IANA registry shall be set up as
follows.</t>
<t>The registration policy for this registry is: Specification
Required</t>
<t>The Value range is: Variable Length</t>
<figure>
<preamble></preamble>
<artwork><![CDATA[
Ciphersuite Numbers Registry:
+-------+--------------------------------------+----------------+
| Value | Description | Reference |
+-------+--------------------------------------+----------------+
| 0 | unassigned | This document |
| 1 | BAB-HMAC | This document |
| 2 | PIB-RSA-SHA256 | This document |
| 3 | PCB-RSA-AES128-PAYLOAD-PIB-PCB | This document |
| 4 | ESB-RSA-AES128-EXT | This document |
| >4 | Reserved | This document |
+-------+--------------------------------------+----------------+
]]></artwork>
</figure>
</section>
<section title="Ciphersuite Flags" toc="default">
<t>This Protocol has a ciphersuite flags field and certain flags are
defined. An IANA registry shall be set up as follows.</t>
<t>The registration policy for this registry is: Specification
Required</t>
<t>The Value range is: Variable Length</t>
<figure>
<preamble></preamble>
<artwork><![CDATA[
Ciphersuite Flags Registry:
+-----------------+----------------------------+----------------+
| Bit Position | Description | Reference |
| (right to left) | | |
+-----------------+----------------------------+----------------+
| 0 | Block contains result | This document |
| 1 | Block contains correlator | This document |
| 2 | Block contains parameters | This document |
| 3 | Destination EIDref present | This document |
| 4 | Source EIDref present | This document |
| all others | Reserved | This document |
+-----------------+----------------------------+----------------+
]]></artwork>
</figure>
</section>
<section title="Parameters and Results" toc="default">
<t>This Protocol has fields for ciphersuite parameters and results.
The field is a type-length-value triple and a registry is required for
the "type" sub-field. The values for "type" apply to both the
ciphersuite parameters and the ciphersuite results fields. Certain
values are defined. An IANA registry shall be set up as follows.</t>
<t>The registration policy for this registry is: Specification
Required</t>
<t>The Value range is: 8-bit unsigned integer</t>
<figure>
<preamble></preamble>
<artwork><![CDATA[
Ciphersuite Parameters and Results Type Registry:
+---------+------------------------------------+----------------+
| Value | Description | Reference |
+---------+------------------------------------+----------------+
| 0 | reserved | This document |
| 1 | initialization vector (IV) | This document |
| 2 | reserved | This document |
| 3 | key-information | This document |
| 4 | fragment range (pair of SDNVs) | This document |
| 5 | integrity signature | This document |
| 6 | unassigned | This document |
| 7 | salt | This document |
| 8 | PCB integrity check value (ICV) | This document |
| 9 | reserved | This document |
| 10 | encapsulated block | This document |
| 11 | block type of encapsulated block | This document |
| 12-191 | reserved | This document |
| 192-250 | private use | This document |
| 251-255 | reserved | This document |
+-------+--------------------------------------+----------------+
]]></artwork>
</figure>
</section>
</section>
</middle>
<back>
<references title="Normative References">
<reference anchor="RFC2119">
<front>
<title>Key words for use in RFCs to Indicate Requirement
Levels</title>
<author fullname="Scott Bradner" initials="S." surname="Bradner">
<organization>Harvard University</organization>
<address>
<postal>
<street>1350 Mass. Ave.</street>
<city>Cambridge</city>
<region>MA</region>
<code>02138</code>
<country>US</country>
</postal>
<phone>+1 617 495 3864</phone>
<email>sob@harvard.edu</email>
</address>
</author>
<author fullname="Joyce K. Reynolds" initials="J."
surname="Reynolds">
<organization abbrev="ISI">USC/Information Sciences
Institute</organization>
<address>
<postal>
<street>4676 Admiralty Way</street>
<city>Marina del Rey</city>
<region>CA</region>
<code>90292</code>
<country>US</country>
</postal>
<phone>+1 310 822 1511</phone>
<facsimile>+1 310 823 6714</facsimile>
<email>jkrey@isi.edu</email>
</address>
</author>
<date month="October" year="1997" />
</front>
<seriesInfo name="RFC" value="2119" />
</reference>
<reference anchor="DTNBP">
<front>
<title>Bundle Protocol Specification</title>
<author fullname="Dr. Keith L. Scott" initials="K." surname="Scott">
<organization>The MITRE Corporation</organization>
<address>
<postal>
<street>7515 Colshire Drive</street>
<city>McLean</city>
<region>VA</region>
<code>22102</code>
<country>US</country>
</postal>
<phone>+1 703-983-6547</phone>
<email>kscott@mitre.org</email>
</address>
</author>
<author fullname="Scott C. Burleigh" initials="S."
surname="Burleigh">
<organization></organization>
</author>
<date month="November" year="2007" />
</front>
<seriesInfo name="RFC" value="5050" />
</reference>
<reference anchor="DTNMD">
<front>
<title>Delay-Tolerant Networking Metadata Extension Block</title>
<author fullname="Susan Flynn Symington" initials="S.F."
surname="Symington">
<organization>The MITRE Corporation</organization>
<address>
<postal>
<street>7515 Colshire Drive</street>
<city>McLean</city>
<region>VA</region>
<code>22102</code>
<country>US</country>
</postal>
<phone>+1 (703) 983-7209</phone>
<email>susan@mitre.org</email>
<uri>http://mitre.org/</uri>
</address>
</author>
<date month="June" year="2007" />
</front>
<seriesInfo name="draft-irtf-dtnrg-bundle-metadata-block-00.txt"
value="" />
</reference>
<reference anchor="RFC2104">
<front>
<title abbrev="HMAC">HMAC: Keyed-Hashing for Message
Authentication</title>
<author fullname="Hugo Krawczyk" initials="H." surname="Krawczyk">
<organization>IBM, T.J. Watson Research Center</organization>
<address>
<postal>
<street>P.O.Box 704</street>
<city>Yorktown Heights</city>
<region>NY</region>
<code>10598</code>
<country>US</country>
</postal>
<email>hugo@watson.ibm.com</email>
</address>
</author>
<author fullname="Mihir Bellare" initials="M." surname="Bellare">
<organization>University of California at San Diego, Dept of
Computer Science and Engineering</organization>
<address>
<postal>
<street>9500 Gilman Drive</street>
<street>Mail Code 0114</street>
<city>La Jolla</city>
<region>CA</region>
<code>92093</code>
<country>US</country>
</postal>
<email>mihir@cs.ucsd.edu</email>
</address>
</author>
<author fullname="Ran Canetti" initials="R." surname="Canetti">
<organization>IBM T.J. Watson Research Center</organization>
<address>
<postal>
<street>P.O.Box 704</street>
<city>Yorktown Heights</city>
<region>NY</region>
<code>10598</code>
<country>US</country>
</postal>
<email>canetti@watson.ibm.com</email>
</address>
</author>
<date month="February" year="1997" />
<abstract>
<t>This document describes HMAC, a mechanism for message
authentication using cryptographic hash functions. HMAC can be
used with any iterative cryptographic hash function, e.g., MD5,
SHA-1, in combination with a secret shared key. The cryptographic
strength of HMAC depends on the properties of the underlying hash
function.</t>
</abstract>
</front>
<seriesInfo name="RFC" value="2104" />
<format octets="22297" target="ftp://ftp.isi.edu/in-notes/rfc2104.txt"
type="TXT" />
</reference>
<reference anchor="RFC4055">
<front>
<title>Additional Algorithms and Identifiers for RSA Cryptography
for use in the Internet X.509 Public Key Infrastructure Certificate
and Certificate Revocation List (CRL) Profile</title>
<author fullname="J. Schaad" initials="J." surname="Schaad">
<organization></organization>
</author>
<author fullname="B. Kaliski" initials="B." surname="Kaliski">
<organization></organization>
</author>
<author fullname="R. Housley" initials="R." surname="Housley">
<organization></organization>
</author>
<date month="June" year="2005" />
</front>
<seriesInfo name="RFC" value="4055" />
<format octets="57479" target="ftp://ftp.isi.edu/in-notes/rfc4055.txt"
type="TXT" />
</reference>
<reference anchor="RFC5280">
<front>
<title>Internet X.509 Public Key Infrastructure Certificate and
Certificate Revocation List (CRL) Profile</title>
<author fullname="D. Cooper" initials="D." surname="Cooper">
<organization></organization>
</author>
<author fullname="s. Santesson" initials="S." surname="Santesson">
<organization></organization>
</author>
<author fullname="S. Farrell" initials="S." surname="Farrell">
<organization></organization>
</author>
<author fullname="W. Polk" initials="W." surname="Polk">
<organization></organization>
</author>
<author fullname="W. Ford" initials="W." surname="Ford">
<organization></organization>
</author>
<date month="May" year="2008" />
</front>
<seriesInfo name="RFC" value="5280" />
</reference>
<reference anchor="RFC5652">
<front>
<title>Cryptographic Message Syntax (CMS)</title>
<author fullname="R. Housley" initials="R." surname="Housley">
<organization></organization>
</author>
<date month="July" year="2004" />
</front>
<seriesInfo name="RFC" value="5652" />
</reference>
<reference anchor="RFC4106">
<front>
<title>The Use of Galois/Counter Mode (GCM) in IPsec Encapsulating
Security Payload (ESP)</title>
<author fullname="J. Viega" initials="J." surname="Viega">
<organization></organization>
</author>
<author fullname="D. McGrew" initials="D." surname="McGrew">
<organization></organization>
</author>
<date month="June" year="2005" />
</front>
<seriesInfo name="RFC" value="4106" />
<format octets="51001" target="ftp://ftp.isi.edu/in-notes/rfc4106.txt"
type="TXT" />
</reference>
<reference anchor="I-D.irtf-dtnrg-iana-bp-registries">
<front>
<title>Delay-Tolerant Networks (DTN) Bundle Protocol IANA
Registries</title>
<author fullname="Marc Blanchet" initials="M." surname="Blanchet">
<organization></organization>
</author>
<date month="April" year="2010" />
</front>
<seriesInfo name="draft-irtf-dtnrg-iana-bp-registries-00.txt,"
value="work-in-progress" />
</reference>
</references>
<references title="Informative References">
<reference anchor="DTNarch">
<front>
<title>Delay-Tolerant Network Architecture</title>
<author fullname="Dr. Vinton G. Cerf" initials="V." surname="Cerf">
<organization abbrev="Google">Google, Inc.</organization>
<address>
<postal>
<street>1818 Library Street</street>
<street>Suite 400</street>
<city>Reston</city>
<region>VA</region>
<code>20190</code>
<country>US</country>
</postal>
<phone>+ 1 202-370-5637</phone>
<email>vint@google.com</email>
</address>
</author>
<author fullname="Scott C. Burleigh" initials="S."
surname="Burleigh">
<organization></organization>
</author>
<author fullname="Robert C. Durst" initials="R." surname="Durst">
<organization></organization>
</author>
<author fullname="Dr. Kevin Fall" initials="K." surname="Fall">
<organization></organization>
</author>
<author fullname="Adrian J. Hooke" initials="A." surname="Hooke">
<organization></organization>
</author>
<author fullname="Dr. Keith L. Scott" initials="K." surname="Scott">
<organization></organization>
</author>
<author fullname="Leigh Torgerson" initials="L." surname="Torgerson">
<organization></organization>
</author>
<author fullname="Howard S. Weiss" initials="H." surname="Weiss">
<organization></organization>
</author>
<date month="April" year="2007" />
</front>
<seriesInfo name="RFC" value="4838" />
<format octets="89265"
target="ftp://ftp.rfc-editor.org/in-notes/rfc4838.txt"
type="TXT" />
</reference>
<!--
<reference anchor="DTNRB">
<front>
<title>Delay-Tolerant Network Retransmission Block</title>
<author initials="S." surname="Symington" fullname="Susan Symington">
<organization>The MITRE Corporation</organization>
<address>
<postal>
<street>7515 Colshire Drive</street>
<city>McLean</city>
<region>VA</region>
<code>22102</code>
<country>US</country>
</postal>
<phone>+1 703-983-7209</phone>
<email>susan@mitre.org</email>
</address>
</author>
<date month="October" year="2009"/>
</front>
<seriesInfo name="draft-irtf-dtnrg-bundle-retrans-06.txt," value="work-in-progress"/>
</reference>
-->
<reference anchor="PHIB">
<front>
<title>Delay-Tolerant Networking Previous Hop Insertion
Block</title>
<author fullname="Susan Symington" initials="S." surname="Symington">
<organization>The MITRE Corporation</organization>
<address>
<postal>
<street>7515 Colshire Drive</street>
<city>McLean</city>
<region>VA</region>
<code>22102</code>
<country>US</country>
</postal>
<phone>+1 703-983-7209</phone>
<email>susan@mitre.org</email>
</address>
</author>
<date month="February" year="2010" />
</front>
<seriesInfo name="draft-irtf-dtnrg-bundle-previous-hop-block-11.txt,"
value="work-in-progress" />
</reference>
<reference anchor="RFC5084">
<front>
<title>Using AES-CCM and AES-GCM Authenticated Encryption in the
Cryptographic Message Syntax (CMS)</title>
<author fullname="R. Housley" initials="R." surname="Housley">
<organization></organization>
</author>
<date month="November" year="2007" />
</front>
<seriesInfo name="RFC" value="5084" />
</reference>
<reference anchor="RFC5751">
<front>
<title>Secure/Multipurpose Internet Mail Extensions (S/MIME) Version
3.2 Message Specification</title>
<author fullname="B. Ramsdell" initials="B." surname="Ramsdell">
<organization>Brute Squad Labs</organization>
</author>
<author fullname="S. Turner" initials="S." surname="Turner">
<organization>IECA</organization>
</author>
<date month="January" year="2010" />
</front>
<seriesInfo name="RFC" value="5751" />
</reference>
<reference anchor="RFC3986">
<front>
<title>Uniform Resource Identifier (URI): Generic Syntax</title>
<author fullname="T. Berners-Lee" initials="T."
surname="Berners-Lee"></author>
<author fullname="R. Fielding." initials="R." surname="Fielding"></author>
<author fullname="L. Masinter" initials="L." surname="Masinter"></author>
<date month="January" year="2005" />
</front>
<seriesInfo name="RFC" value="3986" />
</reference>
</references>
</back>
</rfc>
| PAFTECH AB 2003-2026 | 2026-04-24 10:22:29 |