One document matched: draft-ietf-straw-b2bua-dtls-srtp-02.xml
<?xml version="1.0" encoding="US-ASCII"?>
<!DOCTYPE rfc SYSTEM "rfc2629.dtd">
<?rfc toc="yes"?>
<?rfc tocompact="yes"?>
<?rfc tocdepth="3"?>
<?rfc tocindent="yes"?>
<?rfc symrefs="yes"?>
<?rfc sortrefs="yes"?>
<?rfc comments="yes"?>
<?rfc inline="yes"?>
<?rfc compact="yes"?>
<?rfc subcompact="no"?>
<!--rfc category="info" ipr="full3978"-->
<rfc category="std" docName="draft-ietf-straw-b2bua-dtls-srtp-02"
ipr="trust200902">
<front>
<title abbrev="DTLS-SRTP handling in SIP B2BUA">DTLS-SRTP Handling in
Session Initiation Protocol (SIP) Back-to-Back User Agents
(B2BUAs)</title>
<author fullname="Ram Mohan Ravindranath" initials="R."
surname="Ravindranath">
<organization>Cisco</organization>
<address>
<postal>
<street>Cessna Business Park</street>
<street>Sarjapur-Marathahalli Outer Ring Road</street>
<city>Bangalore</city>
<region>Karnataka</region>
<code>560103</code>
<country>India</country>
</postal>
<email>rmohanr@cisco.com</email>
</address>
</author>
<author fullname="Tirumaleswar Reddy" initials="T." surname="Reddy">
<organization>Cisco</organization>
<address>
<postal>
<street>Cessna Business Park, Varthur Hobli</street>
<street>Sarjapur Marathalli Outer Ring Road</street>
<city>Bangalore</city>
<region>Karnataka</region>
<code>560103</code>
<country>India</country>
</postal>
<email>tireddy@cisco.com</email>
</address>
</author>
<author fullname="Gonzalo Salgueiro" initials="G." surname="Salgueiro">
<organization abbrev="Cisco">Cisco Systems, Inc.</organization>
<address>
<postal>
<street>7200-12 Kit Creek Road</street>
<city>Research Triangle Park</city>
<region>NC</region>
<code>27709</code>
<country>US</country>
</postal>
<email>gsalguei@cisco.com</email>
</address>
</author>
<author fullname="Victor Pascual" initials="V." surname="Pascual">
<organization abbrev="Quobis">Quobis</organization>
<address>
<postal>
<!-- Street is mandatory under postal XML tag. So, change the taga from country to street -->
<street>Spain</street>
</postal>
<email>victor.pascual@quobis.com</email>
</address>
</author>
<author fullname="Parthasarathi Ravindran" initials="Parthasarathi"
surname="Ravindran">
<organization>Nokia Networks</organization>
<address>
<postal>
<street></street>
<city>Bangalore</city>
<region>Karnataka</region>
<country>India</country>
</postal>
<email>partha@parthasarathi.co.in</email>
</address>
</author>
<date year="2015" />
<area>Real-time Applications and Infrastructre (RAI)</area>
<workgroup>STRAW</workgroup>
<abstract>
<t>Session Initiation Protocol (SIP) Back-to-Back User Agents (B2BUAs)
often function on the media plane, rather than just on the signaling
path. This document describes the behavior B2BUAs should follow when
acting on the media plane that use Secure Real-time Transport (SRTP)
security context setup with Datagram Transport Layer Security (DTLS)
protocol.</t>
</abstract>
</front>
<middle>
<section title="Introduction">
<section title="Overview">
<t><xref target="RFC5763"></xref> describes how Session Initiation
Protocol (SIP) <xref target="RFC3261"></xref> can be used to establish
a Secure Real-time Transport Protocol (SRTP) <xref
target="RFC3711"></xref> security context with Datagram Transport
Layer Security (DTLS) <xref target="RFC6347"></xref> protocol. It
describes a mechanism of transporting a certificate fingerprint in the
Session Description Protocol (SDP) <xref target="RFC4566"></xref>,
which identifies the certificate that will be presented during the
DTLS handshake. DTLS-SRTP is defined for point-to-point media
sessions, in which there are exactly two participants. Each DTLS-SRTP
session (described in section 3 of <xref target="RFC5764"></xref>)
contains a single DTLS association, and either two SRTP contexts (if
media traffic is flowing in both directions on the same 5-tuple) or
one SRTP context (if media traffic is only flowing in one
direction).</t>
<t>In many SIP deployments, SIP entities exist in the SIP signaling
path between the originating and final terminating endpoints. These
SIP entities, as described in <xref target="RFC7092"></xref>, modify
SIP and SDP bodies and also are likely to be on the media path. Such
entities, when present in the signaling/media path, are likely to do
several things. For example, some B2BUAs modify parts of the SDP body
(like IP address, port) and subsequently modify the RTP headers as
well.</t>
</section>
<section title="Goals">
<t><xref target="RFC7092"></xref> describes two different categories
of such B2BUAs, according to the level of activities performed on the
media plane:</t>
<t><list style="hanging">
<t>A B2BUA that act as a simple media relay effectively unaware of
anything that is transported and only modifies the UDP/IP header
of the packets.</t>
<t>A B2BUA that performs a media-aware role. It inspects and
potentially modifies RTP or RTP Control Protocol (RTCP) headers;
but it does not modify the payload of RTP/RTCP.</t>
</list></t>
<t>The following sections describe the behaviour B2BUAs should follow
in order to avoid any impact on end-to-end DTLS-SRTP streams.</t>
</section>
</section>
<section anchor="sec-term" title="Terminology">
<t>The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in <xref
target="RFC2119"></xref>.</t>
<t>The following generalized terms are defined in <xref
target="RFC3261"></xref>, Section 6.</t>
<t><list style="hanging">
<t>B2BUA: a SIP Back-to-Back User Agent, which is the logical
combination of a User Agent Server (UAS) and User Agent Client
(UAC).</t>
<t>UAS: a SIP User Agent Server.</t>
<t>UAC: a SIP User Agent Client.</t>
</list></t>
<t>All of the pertinent B2BUA terminology and taxonomy used in this
document is based on <xref target="RFC7092"></xref>.</t>
<t>It is assumed the reader is already familiar with the fundamental
concepts of the RTP protocol <xref target="RFC3550"></xref> and its
taxonomy <xref target="I-D.ietf-avtext-rtp-grouping-taxonomy"></xref>,
as well as those of SRTP <xref target="RFC3711"></xref>, and DTLS <xref
target="RFC6347"></xref>.</t>
</section>
<section title="Media Plane B2BUAs">
<section title="Media Relay">
<t>A media relay, as defined in section 3.2.1 of <xref
target="RFC7092"></xref>, from an application layer point-of-view,
forwards all packets it receives on a negotiated UDP connection,
without inspecting or modifying them. It forwards the UDP payload
as-is changing only the UDP/IP header.</t>
<t>A media relay B2BUA MUST forward the certificate fingerprint and
setup attribute it receives in the SDP from the originating endpoint
as-is to the remote side and vice-versa. The example below shows an
"INVITE with SDP" SIP call flow, with both SIP user agents doing
DTLS-SRTP and a media relay B2BUA that changes only the IP
address/port.</t>
<t><figure anchor="Figure1"
title="INVITE with SDP callflow for Media Relay B2BUA">
<artwork align="center"><![CDATA[
+-------+ +------------------+ +-----+
| Alice | | MediaRelay B2BUA | | Bob |
+-------+ +------------------+ +-----+
|(1) INVITE | (3)INVITE |
| a=setup:actpass | a=setup:actpass |
| a=fingerprint1 | a= fingerprint1 |
| (alice's IP/port) | (B2BUA's IP, port) |
|------------------------>|-------------------------->|
| | |
| (2) 100 trying | |
|<------------------------| |
| | (4) 100 trying |
| |<--------------------------|
| | |
| | (5)200 OK |
| | a=setup:active |
| | a=fingerprint2 |
| | (Bob's IP, port) |
|<------------------------|<--------------------------|
| (6) 200 OK | |
| a=setup:active | |
| a=fingerprint2 | |
| B2BUAs address,port | |
| (7, 8)ClientHello + use_srtp |
|<------------------------|<--------------------------|
| | |
| | |
| (9,10)ServerHello + use_srtp |
|------------------------>|-------------------------->|
| (11) | |
| [Certificate exchange between Alice and Bob over |
| DTLS ] | |
| | |
| (12) | |
|<---------SRTP/SRTCP---->|<----SRTP/SRTCP----------->|
| [B2BUA just changes UDP/IP header] |
]]></artwork>
</figure></t>
<t>NOTE: For brevity the entire fingerprint attribute is not
shown.</t>
<t>For each RTP or RTCP flow, the peers do a DTLS handshake on the
same source and destination port pair to establish a DTLS association.
In this case, Bob, after he receives an INVITE, triggers a DTLS
connection. Note the DTLS handshake and the response to the INVITE may
happen in parallel; thus, the B2BUA SHOULD be prepared to receive
media on the ports it advertised to Bob in the OFFER. Since a media
relay B2BUA does not differentiate between a DTLS, RTP or any packet
sent it receives, it just changes the UDP/IP addresses and forwards
the packet on either leg.</t>
<t><xref target="I-D.ietf-stir-rfc4474bis"></xref> provides a means
for signing portions of SIP requests in order to provide identity
assurance and certificate pinning by providing a signature over the
fingerprint of keying material in SDP for DTLS-SRTP [RFC5763]. A media
relay B2BUA MUST ensure that it does not modify any of the headers
used to construct the signature.</t>
<t>In the above example Alice may be authorized by the authorization
server (SIP proxy) in its domain using the procedures in section 5 of
<xref target="I-D.ietf-stir-rfc4474bis"></xref>. In such a case, if
B2BUA changes some of the SIP headers or SDP content that was used by
Alice's authorization server to generate the identity, it would break
the identity verification procedure explained in section 4.2 of <xref
target="I-D.ietf-stir-rfc4474bis"></xref> resulting in a 438 error
response being returned.</t>
</section>
<section title="Media Aware Relay">
<t>A media-aware relay, unlike the media relay discussed in the
previous section, is actually aware of the media traffic it is
handling. A media-aware relay inspects SRTP and SRTCP packets flowing
through it, and may or may not modify the headers of the packets
before forwarding them.</t>
<section title="RTP and RTCP Header Inspection">
<t>B2BUAs explained in Section 3.2.2 of <xref
target="RFC7092"></xref> do not modify the RTP and RTCP headers but
only inspect the headers. Such B2BUA MUST NOT terminate the
DTLS-SRTP session.</t>
</section>
<section title="RTP and RTCP Header Modification">
<t>In addition to inspecting the RTP and RTCP headers, the B2BUAs
explained in section 3.2.2 <xref target="RFC7092"></xref>, can also
potentially modify them. To modify media headers a B2BUA needs to
act as a DTLS intermediary and terminate the DTLS connection so it
can decrypt/re-encrypt RTP packets. This breaks end-to-end security.
This security and privacy problem can be addressed by having
separate keys for encrypting the RTP header and media payload as
discussed in <xref
target="I-D.jones-avtcore-private-media-reqts"></xref>, in which
case the B2BUA is not aware of the keys used to decrypt the media
payload.</t>
</section>
</section>
<section title="Media Plane B2BUA with NAT handling">
<t>DTLS-SRTP handshakes and offer/answer can happen in parallel. If a
UA is behind a NAT and acting as a DTLS server, the ClientHello
message from a B2BUA(DTLS client) is likely to be lost, as described
in section 7.3 of <xref target="RFC5763"></xref>. In order to overcome
this problem, a UA and B2BUA must support ICE as discussed in section
7.3 of <xref target="RFC5763"></xref>. If ICE check is successful then
UA will receive ClientHello packet from B2BUA.</t>
</section>
</section>
<section title="Forking">
<t>In SIP, it is possible that a request can get forked and multiple
answers might be received for that request. So a single endpoint may end
up negotiating multiple DTLS-SRTP sessions due to forking. B2BUA in both
media relay and media aware relay modes MUST forward the certificate
fingerprints and setup attributes it receives from each answerer as-is
to the offerer. Since DTLS operates on the 5-tuple, B2BUA MUST replace
the answerers transport addresses in each answer with its unique
transport addresses so that the offerer can establish a DTLS association
with each answerer.</t>
<figure>
<artwork><![CDATA[
Bob (192.0.2.1:6666)
/
/
/ DTLS-SRTP=XXX
/
/
DTLS-SRTP=XXX v
<-----------> (192.0.3.1:7777)
Alice (192.0.2.0:5555) B2BUA
<-----------> (192.0.3.1:8888)
DTLS-SRTP=YYY ^
\
\ DTLS-SRTP=YYY
\
\
\
Charlie (192.0.2.2:6666)]]></artwork>
</figure>
<t></t>
<t>For instance, if Alice makes a call that is forked and receives
multiple answers from Bob and Charlie, B2BUA must advertise different
B2BUA transport address in each answer, as shown in the above Figure,
where XXX and YYY represent different DTLS-SRTP associations, B2BUA
replaces the Bob's transport address (192.0.2.1:6666) in the answer with
its transport address (192.0.3.1:7777) and Charlie's transport address
(92.0.2.2:6666) in the answer with its transport address
(192.0.3.1:8888). B2BUA tracks the remote sources (Bob and Alice) and
associates them to the local sources that are used to send packets to
Alice.</t>
</section>
<section title="Security Considerations">
<t>This document describes the behavior media plane B2BUAs (media-aware
and media-unaware) should follow when acting on the media plane that
uses SRTP security context setup with the DTLS protocol. It does not
introduce any specific security considerations beyond those detailed in
<xref target="RFC5763"></xref>. The B2BUA behaviors outlined here also
do not impact the security and integrity of the DTLS-SRTP session nor
the data exchanged over it. A malicious B2BUA can try to break into the
DTLS session, but such an attack can be prevented using the identity
validation mechanism discussed in <xref
target="I-D.ietf-stir-rfc4474bis"></xref>.</t>
</section>
<section anchor="sec.iana-considerations" title="IANA Considerations">
<t>This document makes no request of IANA.</t>
</section>
<section title="Acknowledgments">
<t>Special thanks to Lorenzo Miniero, Ranjit Avarsala, Hadriel Kaplan,
Muthu Arul Mozhi, Paul Kyzivat, Peter Dawes, Brett Tate, Dan Wing,
Charles Eckel and Simon Perreault for their constructive comments,
suggestions, and early reviews that were critical to the formulation and
refinement of this document.</t>
</section>
<section title="Contributors">
<t>Rajeev Seth provided substantial contributions to this document.</t>
</section>
</middle>
<back>
<references title="Normative References">
<?rfc include="reference.RFC.2119"?>
<?rfc include="reference.RFC.3550"?>
<?rfc include="reference.RFC.3711"?>
<?rfc include="reference.RFC.5763"?>
<?rfc include="reference.RFC.5764"?>
<?rfc include="reference.RFC.6347"?>
</references>
<references title="Informative References">
<?rfc include="reference.RFC.3261"?>
<?rfc include="reference.RFC.4566"?>
<?rfc include="reference.RFC.7092"?>
<?rfc include="reference.I-D.ietf-avtext-rtp-grouping-taxonomy"?>
<?rfc include="reference.I-D.jones-avtcore-private-media-reqts" ?>
<?rfc include="reference.I-D.ietf-stir-rfc4474bis" ?>
</references>
</back>
</rfc>
| PAFTECH AB 2003-2026 | 2026-04-24 04:27:43 |