One document matched: draft-ietf-softwire-ds-lite-tunnel-option-06.xml
<?xml version='1.0' ?>
<!-- $Id: draft-ietf-softwire-ds-lite-tunnel-option-00.xml,v 1.12 2010/11/30 00:17:09 dhankins Exp $ -->
<?rfc toc="yes"?>
<?rfc sortrefs="yes"?>
<?rfc compact="yes"?> <?rfc subcompact="no"?>
<?rfc symrefs="yes"?>
<!DOCTYPE rfc SYSTEM 'rfc2629bis.dtd' [
<!ENTITY rfc1034 PUBLIC ''
'http://xml.resource.org/public/rfc/bibxml/reference.RFC.1034.xml'>
<!ENTITY rfc1035 PUBLIC ''
'http://xml.resource.org/public/rfc/bibxml/reference.RFC.1035.xml'>
<!ENTITY rfc2119 PUBLIC ''
'http://xml.resource.org/public/rfc/bibxml/reference.RFC.2119.xml'>
<!ENTITY rfc3596 PUBLIC ''
'http://xml.resource.org/public/rfc/bibxml/reference.RFC.3596.xml'>
<!ENTITY rfc3315 PUBLIC ''
'http://xml.resource.org/public/rfc/bibxml/reference.RFC.3315.xml'>
]>
<rfc ipr="trust200902" category="std"
docName="draft-ietf-softwire-ds-lite-tunnel-option-06">
<front>
<title abbrev="DS-Lite DHCPv6 Option">Dynamic Host Configuration Protocol
for IPv6 (DHCPv6) Option for Dual-Stack Lite</title>
<author initials="D." surname="Hankins" fullname="David W. Hankins">
<organization abbrev="Google">Google, Inc.</organization>
<address>
<postal>
<street>1600 Amphitheatre Parkway</street>
<city>Mountain View</city>
<code>94043</code>
<region>CA</region>
<country>USA</country>
</postal>
<email>dhankins@google.com</email>
</address>
</author>
<author fullname="Tomasz Mrugalski" initials="T.M." surname="Mrugalski">
<organization>Gdansk University of Technology</organization>
<address>
<postal>
<street>Storczykowa 22B/12</street>
<!-- Reorder these if your country does things differently -->
<city>Gdansk</city>
<code>80-177</code>
<country>Poland</country>
</postal>
<phone>+48 698 088 272</phone>
<email>tomasz.mrugalski@eti.pg.gda.pl</email>
<!-- uri and facsimile elements may also be added -->
</address>
</author>
<date day="29" month="November" year="2010"/>
<area>Internet</area>
<workgroup>Softwires</workgroup>
<keyword>DHCPv6</keyword>
<keyword>Softwire</keyword>
<keyword>DS-Lite</keyword>
<abstract>
<t>This document specifies a DHCPv6 option which is meant
to be used by a Dual-Stack Lite client (Basic Bridging BroadBand
element, B4) to discover its Address Family Transition Router
(AFTR) address.</t>
</abstract>
</front>
<middle>
<section title="Requirements Language">
<t>The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL
NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
<xref target="RFC2119">RFC 2119</xref>.</t>
</section>
<section title="Introduction">
<t><xref target="I-D.softwire-ds-lite">Dual-Stack Lite</xref> is a
solution to offer both IPv4 and IPv6 connectivity to customers which
are addressed only with an IPv6 prefix (no IPv4 address is assigned to
the attachment device). One of its key components is an IPv4-over-IPv6
tunnel, commonly referred to as a Softwire. A DS-Lite "Basic
Bridging BroadBand" (B4) device will not know if the network it
is attached to offers Dual-Stack Lite support, and if it did would not
know the remote end of the tunnel to establish a connection.</t>
<t>To inform the B4 of the Address Family Transition Router's (AFTR)
location, a <xref target="RFC1035">DNS</xref> hostname may be used.
Once this information is conveyed, the presence of the configuration
indicating the AFTR's location also informs a host to initiate
Dual-Stack Lite (DS-Lite) service and become a Softwire Initiator.</t>
<t>To provide the conveyance of the configuration information, a single
<xref target="RFC3315">DHCPv6</xref> option is used, expressing the
AFTR's Fully Qualified Domain Name to the B4 element.</t>
<t>The details of how the B4 establishes an IPv4-in-IPv6 tunnel
to the AFTR are out of scope for this document.</t>
</section>
<section title='The AFTR-Name DHCPv6 Option' anchor='option-name'>
<t>The AFTR-Name option consists of option-code and option-len fields
(as all DHCPv6 options have), and a variable length
tunnel-endpoint-name field containing a fully qualified domain name
that refers to the AFTR which the client is asked to connect to.</t>
<t>The OPTION_AFTR_NAME option MAY appear in the root scope of a DHCPv6
packet. It MUST NOT appear inside any IA_NA, IA_TA, IA_PD, IAADDR,
or similar. Any OPTION_AFTR_NAME option received inside any other
option MUST be ignored.</t>
<t>The OPTION_AFTR_NAME option MUST NOT appear more than once in a
message. Clients that receive more than one OPTION_AFTR_NAME options
MUST discard all instances of that option, acting as if none were
sent.</t>
<t>The format of the AFTR-Name option is shown in the following
figure:</t>
<figure align="center" anchor="option-format-name"
title="AFTR-Name DHCPv6 Option Format">
<artwork>
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-------------------------------+-------------------------------+
| OPTION_AFTR_NAME: (TBD) | option-len |
+-------------------------------+-------------------------------+
| |
| tunnel-endpoint-name (FQDN) |
| |
+---------------------------------------------------------------+
OPTION_AFTR_NAME: (TBD)
option-len: Length of the tunnel-endpoint-name field.
tunnel-endpoint-name: A fully qualified domain name identifying
the tunnel endpoint, located at the DS-Lite
AFTR.
</artwork>
</figure>
<t>The tunnel-endpoint-name field is formatted as
required in <xref target="RFC3315">DHCPv6</xref> Section 8
("Representation and Use of Domain Names"). Briefly, the
format described is using a single octet noting the length of one
DNS label (limited to at most 63 octets), followed by the label
contents. This repeats until all labels in the FQDN are exhausted,
including a terminating zero-length label. Any updates to Section 8
of <xref target="RFC3315">DHCPv6</xref> also apply to encoding of this
field. An example format for this option is shown in
<xref target="fqdn-example"/>, which conveys the FQDN
"aftr.example.com.".</t>
<figure align="center" anchor="fqdn-example"
title="Example tunnel-endpoint-name.">
<artwork>
+------+------+------+------+------+------+------+------+------+
| 0x04 | a | f | t | r | 0x07 | e | x | a |
+------+------+------+------+------+------+------+------+------+
| m | p | l | e | 0x03 | c | o | m | 0x00 |
+------+------+------+------+------+------+------+------+------+
</artwork>
</figure>
<t>Note that in the specific case of the
<xref target="fqdn-example">example tunnel-endpoint-name,</xref>
the length of the tunnel-endpoint-name is 18 octets, and so an
option-len field value of 18 would be used.</t>
<t>The option is validated by confirming that the option-len is greater
than 3, that the option data can be contained by the option length
(that the option length does not run off the end of the packet), that
individual label lengths do not exceed the option length, and
that the tunnel-endpoint-name is of valid format as described in
<xref target="RFC3315">DHCPv6 Section 8</xref>; there are no
compression tags, there is at least one label of nonzero length.</t>
</section>
<section title="DHCPv6 Server Behavior">
<t>A DHCPv6 server MUST NOT send more than one OPTION_AFTR_NAME
option.</t>
<t>A DHCPv6 server MUST NOT send the OPTION_AFTR_NAME option as a
suboption in other options; it MUST appear only in the root scope
of any DHCPv6 messages made in response to clients (Reply, Advertise,
et al).</t>
<t><xref target="RFC3315">RFC 3315 Section 17.2.2</xref>
describes how a DHCPv6 client and server negotiate configuration
values using the Option Request Option (OPTION_ORO). As a convenience
to the reader, we mention here that a server will not reply with a
value for the OPTION_AFTR_NAME if the client has not explicitly
enumerated it on its OPTION_ORO.</t>
</section>
<section title="DHCPv6 Client Behavior">
<t>A client that supports the B4 functionality of DS-Lite (defined
in <xref target="I-D.softwire-ds-lite"></xref>) and conforms to
this specification MUST include OPTION_AFTR_NAME on its OPTION_ORO.</t>
<t>Because it requires DNS name to address resolution, a client MAY
also wish to include the OPTION_DNS_SERVERS option on its
OPTION_ORO.</t>
<t>If the client receives the OPTION_AFTR_NAME option, it MUST verify the
option contents as described in <xref target="option-name"/>.</t>
<t>If the client receives more than one OPTION_AFTR_NAME option, it
MUST discard all instances of that option.</t>
<t>The client performs standard DNS resolution using the provided FQDN
to resolve a AAAA record, as defined in <xref target="RFC3596"/> and
STD 13 <xref target="RFC1034"/> <xref target="RFC1035"/>.</t>
<t>If any DNS response contains more than one IPv6 address, the client
picks only one IPv6 address and uses it as a remote tunnel endpoint.
The client MUST NOT establish more than one DS-Lite tunnel at the same
time. For a redundancy and high availability discussion, see Section
7.2 "High availability" of
<xref target="I-D.softwire-ds-lite"/>.</t>
</section>
<section title="Security Considerations">
<t>This document does not present any new security issues, but as with
all DHCPv6-derived configuration state, it is completely possible that
the configuration is being delivered by a third party (Man In The
Middle). As such, there is no basis to trust that the access the
DS-Lite Softwire connection represents can be trusted, and it should
not therefore bypass any security mechanisms such as IP firewalls.</t>
<t><xref target="RFC3315">RFC 3315</xref> discusses DHCPv6-related
security issues.</t>
<t><xref target="I-D.softwire-ds-lite"></xref> discusses DS-Lite
related security issues.</t>
</section>
<section title="IANA Considerations">
<t>IANA is requested to allocate single DHCPv6 option code referencing
this document, delineating OPTION_AFTR_NAME.</t>
</section>
<section title="Acknowledgements">
<t>Authors would like to thank Alain Durand, Rob Austein, Dave
Thaler, Paul Selkirk, Ralph Droms, Mohamed Boucadair and Maglione
Roberta for their valuable feedback and suggestions.</t>
<t>This work has been partially supported by the Polish Ministry
of Science and Higher Education under the European Regional Development
Fund, Grant No. POIG.01.01.02-00-045/09-00 (Future Internet Engineering
Project).</t>
</section>
</middle>
<back>
<references title="Normative References">
&rfc1034;
&rfc1035;
&rfc2119;
&rfc3315;
&rfc3596;
<reference anchor="I-D.softwire-ds-lite">
<front>
<title>Dual-stack lite broadband deployments post IPv4
exhaustion</title>
<author initials='A.' surname='Durand' fullname='Alain
Durand' role="editor">
<organization abbrev='CMCST'>Comcast</organization>
</author>
<!-- <date day="11" month="August" year='2010'/> -->
</front>
<seriesInfo name="Internet-Draft" value="draft-ietf-softwire-dual-stack-lite"/>
</reference>
</references>
</back>
</rfc>
| PAFTECH AB 2003-2026 | 2026-04-24 01:25:35 |