One document matched: draft-ietf-radext-ip-port-radius-ext-12.xml
<?xml version="1.0" encoding="US-ASCII"?>
<!DOCTYPE rfc SYSTEM "rfc2629.dtd" [
<!ENTITY RFC2629 PUBLIC "" "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2629.xml">
<!ENTITY RFC2119 PUBLIC "" "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2119.xml">
<!ENTITY RFC1918 PUBLIC "" "http://xml.resource.org/public/rfc/bibxml/reference.RFC.1918.xml">
<!ENTITY RFC2865 PUBLIC "" "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2865.xml">
<!ENTITY RFC6269 PUBLIC "" "http://xml.resource.org/public/rfc/bibxml/reference.RFC.6269.xml">
<!ENTITY RFC6333 PUBLIC "" "http://xml.resource.org/public/rfc/bibxml/reference.RFC.6333.xml">
<!ENTITY RFC5176 PUBLIC "" "http://xml.resource.org/public/rfc/bibxml/reference.RFC.5176.xml">
<!ENTITY RFC6146 PUBLIC "" "http://xml.resource.org/public/rfc/bibxml/reference.RFC.6146.xml">
<!ENTITY RFC6158 PUBLIC "" "http://xml.resource.org/public/rfc/bibxml/reference.RFC.6158.xml">
<!ENTITY RFC5226 PUBLIC "" "http://xml.resource.org/public/rfc/bibxml/reference.RFC.5226.xml">
<!ENTITY I-D.ietf-behave-lsn-requirements PUBLIC "" "http://xml.resource.org/public/rfc/bibxml3/reference.I-D.ietf-behave-lsn-requirements.xml">
<!ENTITY I-D.ietf-pcp-base PUBLIC "" "http://xml.resource.org/public/rfc/bibxml3/reference.I-D.ietf-pcp-base.xml">
<!ENTITY I-D.miles-behave-l2nat PUBLIC "" "http://xml.resource.org/public/rfc/bibxml3/reference.I-D.miles-behave-l2nat.xml">
<!ENTITY I-D.arkko-dual-stack-extra-lite PUBLIC "" "http://xml.resource.org/public/rfc/bibxml3/reference.I-D.arkko-dual-stack-extra-lite.xml">
]>
<?rfc toc="yes"?>
<?rfc tocompact="yes"?>
<?rfc tocdepth="3"?>
<?rfc tocindent="yes"?>
<?rfc symrefs="yes"?>
<?rfc sortrefs="yes"?>
<?rfc comments="yes"?>
<?rfc inline="yes"?>
<?rfc compact="yes"?>
<?rfc subcompact="no"?>
<rfc category="std" docName="draft-ietf-radext-ip-port-radius-ext-12"
ipr="trust200902">
<front>
<title abbrev="RADIUS Extensions for IP Port ">RADIUS Extensions for IP
Port Configuration and Reporting</title>
<author fullname="Dean Cheng" initials="D." surname="Cheng">
<organization>Huawei</organization>
<address>
<postal>
<street>2330 Central Expressway</street>
<city>Santa Clara</city>
<region>California</region>
<code>95050</code>
<country>USA</country>
</postal>
<email>dean.cheng@huawei.com</email>
</address>
</author>
<author fullname="Jouni Korhonen" initials="J." surname="Korhonen">
<organization>Broadcom Corporation</organization>
<address>
<postal>
<street>3151 Zanker Road</street>
<city>San Jose</city>
<code>95134</code>
<country>USA</country>
</postal>
<email>jouni.nospam@gmail.com</email>
</address>
</author>
<author fullname="Mohamed Boucadair" initials="M." surname="Boucadair">
<organization>Orange</organization>
<address>
<postal>
<street></street>
<city>Rennes</city>
<country>France</country>
</postal>
<email>mohamed.boucadair@orange.com</email>
</address>
</author>
<author fullname="Senthil Sivakumar" initials="S." surname="Sivakumar">
<organization>Cisco Systems</organization>
<address>
<postal>
<street>7100-8 Kit Creek Road</street>
<city>Research Triangle Park</city>
<region>North Carolina</region>
<country>USA</country>
</postal>
<email>ssenthil@cisco.com</email>
</address>
</author>
<date year="" />
<abstract>
<t>This document defines three new RADIUS attributes. For devices that
implement IP port ranges, these attributes are used to communicate with
a RADIUS server in order to configure and report IP transport ports, as well as mapping behavior for specific hosts. This
mechanism can be used in various deployment scenarios such as
Carrier-Grade NAT, IPv4/IPv6 translators, Provider WLAN Gateway,
etc.</t>
</abstract>
<note title="Requirements Language">
<t>The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in <xref
target="RFC2119">RFC 2119</xref>.</t>
</note>
</front>
<middle>
<section title="Introduction">
<t>In a broadband network, customer information is usually stored on a
RADIUS server <xref target="RFC2865"></xref>. At the time when a user
initiates an IP connection request, if this request is authorized, the
RADIUS server will populate the user's configuration information to the
Network Access Server (NAS), which is often referred to as a Broadband
Network Gateway (BNG) in broadband access networks. The Carrier-Grade
NAT (CGN) function may also be implemented on the BNG. Within this
document, the CGN may perform NAT44 <xref target="RFC3022"></xref>,
NAT64 <xref target="RFC6146"></xref>, or Dual-Stack Lite AFTR <xref
target="RFC6333"> </xref> function. In such case, the CGN IP transport port (e.g., TCP/UDP port) mapping(s) behavior(s) can be part
of the
configuration information sent from the RADIUS server to the NAS/BNG.
The NAS/BNG may also report to the RADIUS Server the port/identifier
mapping behavior applied by the CGN to a user session to the RADIUS
server, as part of the accounting information sent from the NAS/BNG to a
RADIUS server.</t>
<t>When IP packets traverse the CGN, it performs mapping on
the IP transport (e.g., TCP/UDP) source port as required. An
IP transport source port, along with source IP address, destination
IP address, destination port and protocol identifier if applicable,
uniquely identify a session. Since the number space of IP
transport ports in CGN's external realm is shared among multiple users
assigned with the same IPv4 address, the total number of a user's
simultaneous IP sessions is likely to be subject to port quota (see
Section 5 of <xref target="RFC6269"></xref>).</t>
<t>The attributes defined in this document may also be used to report
the assigned port range in some deployments such as Provider WLAN <xref
target="I-D.gundavelli-v6ops-community-wifi-svcs"></xref>. For example,
a visiting host can be managed by a CPE (Customer Premises Equipment )
which will need to report the assigned port range to the service
platform. This is required for identification purposes (see TR-146 <xref
target="TR-146"></xref> for more details).</t>
<t>This document proposes three new attributes as RADIUS protocol's
extensions, and they are used for separate purposes as follows:</t>
<t><list style="numbers">
<t>IP-Port-Limit-Info: This attribute may be carried in RADIUS
Access-Accept, Access-Request, Accounting-Request or CoA-Request
packet. The purpose of this attribute is to limit the total number of IP source transport ports allocated to a user,
associated with one or more IPv4 or IPv6 addresses.</t>
<t>IP-Port-Range: This attribute may be carried in RADIUS
Accounting-Request packet. The purpose of this attribute is to
report by an address sharing device (e.g., a CGN) to the RADIUS
server the range of IP source transport ports that
have been allocated or deallocated associated with a given
IPv4/IPv6 address for a user.</t>
<t>IP-Port-Forwarding-Map: This attribute may be carried in RADIUS
Access-Accept, Access-Request, Accounting-Request or CoA-Request
packet. The purpose of this attribute is to specify how an IP
internal source transport port together with its internal IPv4 or IPv6
address are mapped to an external source transport port
along with the external IPv4 address.</t>
</list></t>
<t>IPFIX Information Elements <xref target="RFC7012"></xref> can
be used
for IP flow identification and representation over RADIUS. This document
provides a mapping between some RADIUS TLV and IPFIX Information Element
Identifiers. A new IPFIX Information Element is
defined by this document (see <xref target="TLV2"></xref>).</t>
<t>IP protocol numbers (refer to
<xref target="ProtocolNumbers"></xref>) can be used for
identification of IP transport protocols (e.g., TCP/UDP, DCCP and
SCTP) that are associated with some RADIUS attributes.
</t>
</section>
<section title="Terminology">
<t>This document makes use of the following terms:<list style="symbols">
<t>IP Port: refers to IP transport port.</t>
<t>IP Port Type: refers to the IP transport protocol
as indicated by the IP transport protocol number, refer to
(refer to <xref target="ProtocolNumbers"></xref>)</t>
<t>IP Port Limit: denotes the maximum number of IP ports
for a
specific IP port type, that a device supporting port ranges can use
when performing port number mapping for a specific user. Note, this
limit is usually associated with one or more IPv4/IPv6
addresses.</t>
<t>IP Port Range: specifies a set of contiguous IP ports, indicated
by the lowest numerical number and the highest numerical number,
inclusively.</t>
<t>Internal IP Address: refers to the IP address that is used as a
source IP address in an outbound IP packet sent towards a device
supporting port ranges in the internal realm.</t>
<t>External IP Address: refers to the IP address that is used as a
source IP address in an outbound IP packet after traversing a device
supporting port ranges in the external realm.</t>
<t>Internal Port: is an IP transport port, which
is allocated by a host or application behind a device supporting
port ranges for an outbound IP packet in the internal realm.</t>
<t>External Port: is an IP transport port, which
is allocated by a device supporting port ranges upon receiving an
outbound IP packet in the internal realm, and is used to replace the
internal port that is allocated by a user or application.</t>
<t>External realm: refers to the networking segment where external
IP addresses are used as source addresses of outbound packets
forwarded by a device supporting port ranges.</t>
<t>Internal realm: refers to the networking segment that is behind a
device supporting port ranges and where internal IP addresses are
used.</t>
<t>Mapping: associates with a device supporting port ranges for a
relationship between an internal IP address, internal port and the
protocol, and an external IP address, external port, and the
protocol.</t>
<t>Port-based device: a device that is capable of providing IP
address and IP transport port mapping services and in particular, with the
granularity of one or more subsets within the 16-bit IP transport port number
range. A typical example of this device is a CGN, CPE, Provider WLAN
Gateway, etc.</t>
</list></t>
</section>
<section anchor="attrs" title="Extensions of RADIUS Attributes and TLVs">
<t>These three new attributes are defined in the following
sub-sections:</t>
<t><list style="numbers">
<t>IP-Port-Limit-Info Attribute</t>
<t>IP-Port-Range Attribute</t>
<t>IP-Port-Forwarding-Map Attribute</t>
</list></t>
<t>All these attributes are allocated from the RADIUS "Extended Type"
code space per <xref target="RFC6929"></xref>.</t>
<t>These attributes and their embedded TLVs (refer to <xref
target="DEFTLVs"></xref>) are defined with globally unique names and
follow the guideline in Section 2.7.1 of <xref
target="RFC6929"></xref>.</t>
<t>In all the figures describing the RADIUS attributes and TLV formats
in the following sub-sections, the fields are transmitted from left to
right.</t>
<section anchor="DEFATT" title="Extended Attributes for IP Ports">
<section anchor="sessionlimit" title="IP-Port-Limit-Info Attribute">
<t>This attribute is of type "TLV" as defined in the RADIUS Protocol
Extensions <xref target="RFC6929"></xref>. It contains some
sub-attributes and the requirement is as follows:
<list style="symbols">
<t>The IP-Port-Limit-Info Attribute MAY contain the IP-Port-Type TLV (see <xref target="TLV0"></xref>).</t>
<t>The IP-Port-Limit-Info Attribute MUST contain the IP-Port-Limit TLV (see <xref target="TLV2"></xref>).</t>
<t>The IP-Port-Limit-Info Attribute MAY contain the IP-Port-Ext-IPv4-Addr TLV (see <xref
target="TLV3"></xref>).</t>
</list></t>
<t>The IP-Port-Limit-Info Attribute specifies the maximum
number of IP ports as indicated in
IP-Port-Limit TLV, of a specific IP transport protocol as indicated in
IP-Port-Type TLV, and associated with a given IPv4 address as
indicated in IP-Port-Ext-IPv4-Addr TLV for an end user.</t>
<t>Note that when IP-Port-Type TLV is not included as part of the IP-Port-Limit-Info Attribute, the port limit
applies to all IP transport protocols.</t>
<t>Note also that when IP-Port-Ext-IPv4-Addr TLV is not
included as part of the IP-Port-Limit-Info Attribute, the
port limit applies to all the IPv4 addresses managed by
the port device, e.g., a CGN or NAT64 device.</t>
<t>The IP-Port-Limit-Info Attribute MAY appear in an
Access-Accept
packet. It MAY also appear in an Access-Request packet as a
preferred maximum number of IP ports indicated by the device
supporting port ranges co-located with the NAS, e.g., a CGN or
NAT64. However, the RADIUS server is not required to honor such a
preference.</t>
<t>The IP-Port-Limit-Info Attribute MAY appear in a CoA-Request
packet.</t>
<t>The IP-Port-Limit-Info Attribute MAY appear in an
Accounting-Request packet.</t>
<t>The IP-Port-Limit-Info Attribute MUST NOT appear in any other
RADIUS packet.</t>
<t>The format of the IP-Port-Limit-Info Attribute is shown in <xref
target="limit"></xref>.</t>
<figure anchor="limit">
<preamble></preamble>
<artwork><![CDATA[
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Length | Extended-Type | Value ...
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
]]></artwork>
<postamble></postamble>
</figure>
<t>Type</t>
<t><list counter="1" hangIndent="5">
<t>241 (To be confirmed by IANA).</t>
</list>Length <list counter="1" hangIndent="5">
<t>This field indicates the total length in bytes of all fields
of this attribute, including the Type, Length, Extended-Type,
and the entire length of the embedded TLVs.</t>
</list></t>
<t>Extended-Type<list counter="1" hangIndent="5">
<t>TBD1.</t>
</list></t>
<t>Value<list counter="1" hangIndent="5">
<t>This field contains a set of TLVs as follows:</t>
<t>IP-Port-Type TLV<list counter="1" hangIndent="5">
<t>This TLV contains a value that indicates the IP port
type. Refer to <xref target="TLV0"></xref>.</t>
</list></t>
<t>IP-Port-Limit TLV<list counter="1" hangIndent="5">
<t>This TLV contains the maximum number of IP ports of a
specific IP port type and associated with a given IPv4
address for an end user. This TLV MUST be included in the
IP-Port-Limit-Info Attribute. Refer to <xref
target="TLV2"></xref>.</t>
</list></t>
<t>IP-Port-Ext-IPv4-Addr TLV<list counter="1" hangIndent="5">
<t>This TLV contains the IPv4 address that is associated
with the IP port limit contained in the IP-Port-Limit TLV.
This TLV is optionally included as part of the
IP-Port-Limit-Info Attribute. Refer to <xref
target="TLV3"></xref>.</t>
</list></t>
</list></t>
<t>IP-Port-Limit-Info Attribute is associated with the following
identifier: 241.Extended-Type(TBD1).</t>
</section>
<section anchor="sessionrange" title="IP-Port-Range Attribute">
<t>This attribute is of type "TLV" as defined in the RADIUS Protocol
Extensions <xref target="RFC6929"></xref>. It contains some
sub-attributes and the requirement is as follows:
<list style="symbols">
<t>The IP-Port-Range Attribute MAY contain the IP-Port-Type TLV (see <xref target="TLV0"></xref>).</t>
<t>The IP-Port-Range Attribute MUST contain the IP-Port-Alloc TLV (see <xref target="TLV7"></xref>).</t>
<t>For port allocation, the IP-Port-Range Attribute MUST contain both the IP-Port-Range-Start TLV (see <xref
target="TLV8"></xref>) and the IP-Port-Range-END TLV
(see <xref target="TLV9"></xref>). For port deallocation, the IP-Port-Range Attribute MAY
contain both of these two TLVs; if the two TLVs are not
included, it implies that all ports that are previously allocated are now all deallocated.
</t>
<t>The IP-Port-Range Attribute MAY contain the IP-Port-Ext-IPv4-Addr TLV (see <xref
target="TLV3"></xref>).</t>
<t>The IP-Port-Range Attribute MAY contain the
IP-Port-Local-Id TLV (see <xref
target="TLV10"></xref>).</t>
</list></t>
<t>The IP-Port-Range Attribute contains a range of contiguous
IP ports. These ports are either to be allocated or
deallocated depending on the Value carried by the
IP-Port-Alloc TLV. </t>
<t>If the IP-Port-Type TLV is included
as part of the IP-Port-Range Attribute, the port range
is associated with the specific IP transport protocol as specified in the IP-Port-Type TLV, but
otherwise is for all IP transport protocols.
</t>
<t>If the IP-Port-Ext-IPv4-Addr TLV is included as part of
the IP-Port-Range Attribute, the port range as specified
is associated with IPv4 address as indicated, but
otherwise is for all IPv4 addresses by the port device (e.g., a CGN device) for the end user.</t>
<t>This attribute can be used to convey a single IP transport port
number; in such case the Value of the IP-Port-Range-Start
TLV and the IP-Port-Range-End TLV, respectively, contain
the same port number.</t>
<t>The information contained in the IP-Port-Range
Attribute is sent to RADIUS server.</t>
<t>The IP-Port-Range Attribute MAY appear in an
Accounting-Request packet.</t>
<t>The IP-Port-Range Attribute MUST NOT appear in any other RADIUS
packet.</t>
<t>The format of the IP-Port-Range Attribute is shown in <xref
target="range"></xref>.</t>
<figure anchor="range">
<preamble></preamble>
<artwork><![CDATA[
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Length | Extended-Type | Value ...
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
]]></artwork>
<postamble></postamble>
</figure>
<t>Type</t>
<t><list counter="1" hangIndent="5">
<t>241 (To be confirmed by IANA).</t>
</list>Length <list counter="1" hangIndent="5">
<t>This field indicates the total length in bytes of all fields
of this attribute, including the Type, Length, Extended-Type,
and the entire length of the embedded TLVs.</t>
</list></t>
<t>Extended-Type<list counter="1" hangIndent="5">
<t>TBD2.</t>
</list></t>
<t>Value<list counter="1" hangIndent="5">
<t>This field contains a set of TLVs as follows:</t>
<t>IP-Port-Type TLV<list counter="1" hangIndent="5">
<t>This TLV contains a value that indicates the IP port
type. Refer to <xref target="TLV0"></xref>.</t>
</list></t>
<t>IP-Port-Alloc TLV<list counter="1" hangIndent="5">
<t>This TLV contains a flag to indicate that the range of
the specified IP ports for either allocation or
deallocation. This TLV MUST be included as part of the
IP-Port-Range Attribute. Refer to <xref
target="TLV7"></xref>.</t>
</list></t>
<t>IP-Port-Range-Start TLV<list counter="1" hangIndent="5">
<t>This TLV contains the smallest port number of a range of
contiguous IP ports. To report the port allocation, this TLV
MUST be included together with IP-Port-Range-End TLV as part
of the IP-Port-Range Attribute. Refer to <xref
target="TLV8"></xref>.</t>
</list></t>
<t>IP-Port-Range-End TLV<list counter="1" hangIndent="5">
<t>This TLV contains the largest port number of a range of
contiguous IP ports. To report the port allocation, this TLV
MUST be included together with IP-Port-Range-Start TLV as
part of the IP-Port-Range Attribute. Refer to <xref
target="TLV9"></xref>.</t>
</list></t>
<t>IP-Port-Ext-IPv4-Addr TLV<list counter="1" hangIndent="5">
<t>This TLV contains the IPv4 address that is associated
with the IP port range, as collectively indicated in the
IP-Port-Range-Start TLV and the IP-Port-Range-End TLV. This
TLV is optionally included as part of the IP-Port-Range
Attribute. Refer to <xref target="TLV3"></xref>.</t>
</list></t>
<t>IP-Port-Local-Id TLV<list counter="1" hangIndent="5">
<t>This TLV contains a local session identifier at the
customer premise, such as MAC address, interface ID, VLAN
ID, PPP sessions ID, VRF ID, IP address/prefix, etc. This
TLV is optionally included as part of the IP-Port-Range
Attribute. Refer to <xref target="TLV10"></xref>.</t>
</list></t>
</list></t>
<t>The IP-Port-Range attribute is associated with the following
identifier: 241.Extended-Type(TBD2).</t>
</section>
<section anchor="portmap" title="IP-Port-Forwarding-Map Attribute">
<t>This attribute is of type "TLV" as defined in the RADIUS Protocol
Extensions <xref target="RFC6929"></xref>. It contains some
sub-attributes and the requirement is as follows:
<list style="symbols">
<t>The IP-Port-Forwarding-Map Attribute MAY contain the
IP-Port-Type TLV (see <xref target="TLV0"></xref>).</t>
<t>The IP-Port-Forwarding-Map Attribute MUST contain
both IP-Port-Int-Port TLV (see <xref
target="TLV5"></xref>) and the IP-Port-Ext-Port TLV
(see <xref target="TLV6"></xref>).</t>
<t>If the internal realm is with IPv4 address family,
the IP-Port-Forwarding-Map Attribute MUST contain the
IP-Port-Int-IPv4-Addr TLV (see <xref target="TLV4"></xref>); if the internal realm is with
IPv6 address family, the IP-Port-Forwarding-Map
Attribute MUST contain the IP-Port-Int-IPv6-Addr TLV
(see <xref target="TLV46"></xref>).</t>
<t>The IP-Port-Forwarding-Map Attribute MAY contain
the IP-Port-Ext-IPv4-Addr TLV (see <xref
target="TLV3"></xref>).</t>
<t>The IP-Port-Forwarding-Map Attribute MAY contain the
IP-Port-Local-Id TLV (see <xref target="TLV10"></xref>).</t>
</list></t>
<t>The attribute contains a 2-byte IP internal port number
and a 2-byte IP external port number. The internal port
number is associated with an internal IPv4 or IPv6 address
that MUST always be included. The external port number
is associated with a specific external IPv4 address if
included, but otherwise with all external IPv4 addresses
for the end user.</t>
<t>If the IP-Port-Type TLV is included as part of the
IP-Port-Forwarding-Map Attribute, the port mapping is
associated with the specific IP transport protocol as
specified in the IP-Port-Type TLV, but otherwise is for
all IP transport protocols.</t>
<t>The IP-Port-Forwarding-Map Attribute MAY appear in an
Access-Accept packet. It MAY also appear in an Access-Request packet
to indicate a preferred port mapping by the device co-located with
NAS. However the server is not required to honor such a
preference.</t>
<t>The IP-Port-Forwarding-Map Attribute MAY appear in a CoA-Request
packet.</t>
<t>The IP-Port-Forwarding-Map Attribute MAY also appear in an
Accounting-Request packet.</t>
<t>The IP-Port-Forwarding-Map Attribute MUST NOT appear in any other
RADIUS packet.</t>
<t>The format of the IP-Port-Forwarding-Map Attribute is shown in
<xref target="map"></xref>.</t>
<figure anchor="map">
<preamble></preamble>
<artwork><![CDATA[
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Length | Extended-Type | Value ....
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
]]></artwork>
<postamble></postamble>
</figure>
<t>Type</t>
<t><list counter="1" hangIndent="5">
<t>241 (To be confirmed by IANA).</t>
</list>Length <list counter="1" hangIndent="5">
<t>This field indicates the total length in bytes of all fields
of this attribute, including the Type, Length, Extended-Type,
and the entire length of the embedded TLVs.</t>
</list></t>
<t>Extended-Type<list counter="1" hangIndent="5">
<t>TBD3.</t>
</list></t>
<t>Value<list counter="1" hangIndent="5">
<t>This field contains a set of TLVs as follows:</t>
<t>IP-Port-Type TLV<list counter="1" hangIndent="5">
<t>This TLV contains a value that indicates the IP port
type. Refer to <xref target="TLV0"></xref>.</t>
</list></t>
<t>IP-Port-Int-Port TLV<list counter="1" hangIndent="5">
<t>This TLV contains an internal IP port number associated
with an internal IPv4 or IPv6 address. This TLV MUST be
included together with IP-Port-Ext-Port TLV as part of the
IP-Port-Forwarding-Map attribute. Refer to <xref
target="TLV5"></xref>.</t>
</list></t>
<t>IP-Port-Ext-Port TLV<list counter="1" hangIndent="5">
<t>This TLV contains an external IP port number associated
with an external IPv4 address. This TLV MUST be included
together with IP-Port-Int-Port TLV as part of the
IP-Port-Forwarding-Map attribute. Refer to <xref
target="TLV6"></xref>.</t>
</list></t>
<t>IP-Port-Int-IPv4-Addr TLV<list counter="1" hangIndent="5">
<t>This TLV contains an IPv4 address that is associated with the internal IP port number contained in the
IP-Port-Int-Port TLV. For internal realm with IPv4 address family, this TLV MUST be included as part of the
IP-Port-Forwarding-Map Attribute. Refer to <xref
target="TLV4"></xref>.</t>
</list></t>
<t>IP-Port-Int-IPv6-Addr TLV<list counter="1" hangIndent="5">
<t>This TLV contains an IPv6 address that is associated with the internal IP port number contained in the
IP-Port-Int-Port TLV. For internal realm with IPv6 address family, this TLV MUST be included as part of the
IP-Port-Forwarding-Map Attribute. Refer to <xref
target="TLV46"></xref>.</t>
</list></t>
<t>IP-Port-Ext-IPv4-Addr TLV<list counter="1" hangIndent="5">
<t>This TLV contains an IPv4 address that is associated with
the external IP port number contained in the
IP-Port-Ext-Port TLV. This TLV MAY be included as part of
the IP-Port-Forwarding-Map Attribute. Refer to <xref
target="TLV3"></xref>.</t>
</list></t>
<t>IP-Port-Local-Id TLV<list counter="1" hangIndent="5">
<t>This TLV contains a local session identifier at the
customer premise, such as MAC address, interface ID, VLAN
ID, PPP sessions ID, VRF ID, IP address/prefix, etc. This
TLV is optionally included as part of the
IP-Port-Forwarding-Map Attribute. Refer to
<xref target="TLV10"></xref>.</t>
</list></t>
</list></t>
<t>The IP-Port-Forwarding-Map Attribute is associated with the
following identifier: 241.Extended-Type(TBD3).</t>
</section>
</section>
<section anchor="DEFTLVs" title="RADIUS TLVs for IP Ports">
<t>The TLVs that are included in the three attributes (see <xref
target="DEFATT"></xref>) are defined in the following sub-sections.
These TLVs use the format defined in <xref target="RFC6929"></xref>.
As the three attributes carry similar data, we have defined a common
set of TLVs which are used for all three attributes. That is, the TLVs
have the same name and number, when encapsulated in any one of the
three parent attributes. See <xref target="sessionlimit"></xref>,
<xref target="sessionrange"></xref>, and <xref
target="portmap"></xref> for a list of which TLV is permitted within
which parent attribute.</t>
<section anchor="TLV0" title="IP-Port-Type TLV">
<t>The format of IP-Port-Type TLV is shown in <xref
target="tlv0"></xref>. This attribute carries the IP transport
protocol number defined by IANA (refer to <xref
target="ProtocolNumbers"></xref>) </t>
<figure anchor="tlv0">
<preamble></preamble>
<artwork><![CDATA[
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| TLV-Type | Length | Protocol-Number
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Protocol-Number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
]]></artwork>
<postamble></postamble>
</figure>
<t>TLV-Type<list counter="1" hangIndent="5">
<t>1</t>
</list></t>
<t>Length<list counter="1" hangIndent="5">
<t>6</t>
</list></t>
<t>Protocol-Number<list counter="1" hangIndent="5">
<t>Integer. This field contains the data (unsigned8) of
the port number defined in <xref
target="ProtocolNumbers"></xref>, right justified, and the unused bits in this field MUST be set to zero.</t>
</list></t>
<t>IP-Port-Type TLV MAY be included in the following Attributes:<list
style="symbols">
<t>IP-Port-Limit-Info Attribute, identified as 241.TBD1.1 (see
Section 3.1.1).</t>
<t>IP-Port-Range Attribute, identified as 241.TBD2.1 (see
Section 3.1.2).</t>
</list></t>
<t>When the IP-Port-Type TLV is included within a
RADIUS Attribute, the associated attribute is applied
to the IP transport protocol as indicated by the
Protocol-Number only, such as TCP, UDP,
SCTP <xref target="RFC4960"></xref>,
DCCP <xref target="RFC4340"></xref>,
etc.</t>
</section>
<section anchor="TLV2" title="IP-Port-Limit TLV">
<t>The format of IP-Port-Limit TLV is shown in <xref
target="tlv"></xref>. This attribute carries IPFIX Information
Element "sourceTransportPortsLimit (TBAx1), which indicates
the maximum number of IP transport ports as a limit
for an end user to use that is associated with one or
more IPv4 or IPv6 addresses.</t>
<figure anchor="tlv">
<preamble></preamble>
<artwork><![CDATA[
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| TLV-Type | Length | sourceTransportPortsLimit
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
sourceTransportPortsLimit |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
]]></artwork>
<postamble></postamble>
</figure>
<t>TLV-Type<list counter="1" hangIndent="5">
<t>2</t>
</list></t>
<t>Length<list counter="1" hangIndent="5">
<t>6</t>
</list></t>
<t>sourceTransportPortsLimit<list counter="1" hangIndent="5">
<t>Integer. This field contains the data (unsigned16) of
sourceTransportPortsLimit (TBAx1) defined in IPFIX, right justified, and
the unused bits in this field MUST be set to zero.</t>
</list></t>
<t>IP-Port-Limit TLV MUST be included as part of the IP-Port-Limit-Info
Attribute (refer to Section 3.1.1), identified as 241.TBD1.2.</t>
</section>
<section anchor="TLV3" title="IP-Port-Ext-IPv4-Addr TLV">
<t>The format of IP-Port-Ext-IPv4-Addr TLV is shown in <xref
target="tlv3"></xref>. This attribute carries IPFIX Information
Element 225, "postNATSourceIPv4Address", which is the IPv4 source
address after NAT operation (refer to <xref
target="IPFIX"></xref>).</t>
<figure anchor="tlv3">
<preamble></preamble>
<artwork><![CDATA[
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| TLV-Type | Length | postNATSourceIPv4Address
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
postNATSourceIPv4Address |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
]]></artwork>
<postamble></postamble>
</figure>
<t>TLV-Type<list counter="1" hangIndent="5">
<t>3</t>
</list></t>
<t>Length<list counter="1" hangIndent="5">
<t>6</t>
</list></t>
<t>postNATSourceIPv4Address<list counter="1" hangIndent="5">
<t>Integer. This field contains the data (ipv4Address) of
postNATSourceIPv4Address (225) defined in IPFIX.</t>
</list></t>
<t>IP-Port-Ext-IPv4-Addr TLV MAY be included in the following
Attributes:<list style="symbols">
<t>IP-Port-Limit-Info Attribute, identified as 241.TBD1.3 (see
Section 3.1.1).</t>
<t>IP-Port-Range Attribute, identified as 241.TBD2.3 (see
Section 3.1.2).</t>
<t>IP-Port-Forwarding-Mapping Attribute, identified as
241.TBD3.3 (see Section 3.1.3).</t>
</list></t>
</section>
<section anchor="TLV4" title="IP-Port-Int-IPv4-Addr TLV">
<t>The format of IP-Port-Int-IPv4 TLV is shown in <xref
target="tlv4"></xref>. This attribute carries IPFIX Information
Element 8, "sourceIPv4Address", which is the IPv4 source address
before NAT operation (refer to <xref target="IPFIX"></xref>).</t>
<figure anchor="tlv4">
<preamble></preamble>
<artwork><![CDATA[
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| TLV-Type | Length | sourceIPv4Address
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
sourceIPv4Address |
+-+--+-+-+-+-+-+-++-+-+-+-+-+-+-+
]]></artwork>
<postamble></postamble>
</figure>
<t>TLV-Type<list counter="1" hangIndent="5">
<t>4</t>
</list></t>
<t>Length<list counter="1" hangIndent="5">
<t>6</t>
</list></t>
<t>sourceIPv4Address <list counter="1" hangIndent="5">
<t>Integer. This field contains the data (ipv4Address) of
sourceIPv4Address (8) defined in IPFIX.</t>
</list></t>
<t>If the internal realm is with IPv4 address family, the
IP-Port-Int-IPv4-Addr TLV MUST be included as part of the
IP-Port-Forwarding-Map Attribute (refer to <xref
target="portmap"></xref>), identified as 241.TBD3.4.</t>
</section>
<section anchor="TLV46" title="IP-Port-Int-IPv6-Addr TLV">
<t>The format of IP-Port-Int-IPv6-Addr TLV is shown in <xref
target="tlv46"></xref>. This attribute carries IPFIX Information
Element 27, "sourceIPv6Address", which is the IPv6 source address
before NAT operation (refer to <xref target="IPFIX"></xref>).</t>
<figure anchor="tlv46">
<preamble></preamble>
<artwork><![CDATA[
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| TLV-Type | Length | sourceIPv6Address
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
sourceIPv6Address
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
sourceIPv6Address
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
sourceIPv6Address
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
sourceIPv6Address |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
]]></artwork>
<postamble></postamble>
</figure>
<t>TLV-Type<list counter="1" hangIndent="5">
<t>5</t>
</list></t>
<t>Length<list counter="1" hangIndent="5">
<t>18</t>
</list></t>
<t>sourceIPv6Address<list counter="1" hangIndent="5">
<t>IPv6 address (128 bits). This field contains the data
(ipv6Address) of sourceIPv6Address (27) defined in IPFIX.</t>
</list></t>
<t>If the internal realm is with IPv6 address family, the
IP-Port-Int-IPv6-Addr TLV MUST be included as part of the
IP-Port-Forwarding-Map Attribute (refer to <xref
target="portmap"></xref>), identified as 241.TBD3.5.</t>
</section>
<section anchor="TLV5" title="IP-Port-Int-Port TLV">
<t>The format of IP-Port-Int-Port TLV is shown in <xref
target="tlv5"></xref>. This attribute carries IPFIX Information
Element 7, "sourceTransportPort", which is the source transport
number associated with an internal IPv4 or IPv6 address (refer to
<xref target="IPFIX"></xref>).</t>
<figure anchor="tlv5">
<preamble></preamble>
<artwork><![CDATA[
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| TLV-Type | Length | sourceTransportPort
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
sourceTransportPort |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
]]></artwork>
<postamble></postamble>
</figure>
<t>TLV-Type<list counter="1" hangIndent="5">
<t>6</t>
</list></t>
<t>Length<list counter="1" hangIndent="5">
<t>6</t>
</list></t>
<t>sourceTransportPort<list counter="1" hangIndent="5">
<t>Integer. This field contains the data (unsigned16) of
sourceTrasnportPort (7) defined in IPFIX, right justified, and
unused bits MUST be set to zero.</t>
</list></t>
<t>IP-Port-Int-Port TLV MUST be included as part of the
IP-Port-Forwarding-Map Attribute (refer to <xref
target="portmap"></xref>), identified as 241.TBD3.6.</t>
</section>
<section anchor="TLV6" title="IP-Port-Ext-Port TLV">
<t>The format of IP-Port-Ext-Port TLV is shown in <xref
target="tlv6"></xref>. This attribute carries IPFIX Information
Element 227, "postNAPTSourceTransportPort", which is the transport
number associated with an external IPv4 address(refer to <xref
target="IPFIX"></xref>).</t>
<figure anchor="tlv6">
<preamble></preamble>
<artwork><![CDATA[
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| TLV-Type | Length | postNAPTSourceTransportPort
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
postNAPTSourceTransportPort |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
]]></artwork>
<postamble></postamble>
</figure>
<t>TLV-Type<list counter="1" hangIndent="5">
<t>7</t>
</list></t>
<t>Length<list counter="1" hangIndent="5">
<t>6</t>
</list></t>
<t>postNAPTSourceTransportPort<list counter="1" hangIndent="5">
<t>Integer. This field contains the data (unsigned16) of
postNAPTSourceTrasnportPort (227) defined in IPFIX, right
justified, and unused bits MUST be set to zero.</t>
</list></t>
<t>IP-Port-Ext-Port TLV MUST be included as part of the
IP-Port-Forwarding-Map Attribute (refer to <xref
target="portmap"></xref>), identified as 241.TBD3.7.</t>
</section>
<section anchor="TLV7" title="IP-Port-Alloc TLV">
<t>The format of IP-Port-Alloc TLV is shown in <xref
target="tlv7"></xref>. This attribute carries IPFIX Information
Element 230, "natEvent", which is a flag to indicate an action of
NAT operation (refer to <xref target="IPFIX"></xref>).</t>
<t>When the value of natEvent is "1" (Create event), it means to
allocate a range of transport ports; when the value is "2", it means
to deallocate a range of transports ports. For the purpose of this
TLV, no other value is used.</t>
<figure anchor="tlv7">
<preamble></preamble>
<artwork><![CDATA[
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| TLV-Type | Length | natEvent
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
natEvent |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
]]></artwork>
<postamble></postamble>
</figure>
<t>TLV-Type<list counter="1" hangIndent="5">
<t>8</t>
</list></t>
<t>Length<list counter="1" hangIndent="5">
<t>6</t>
</list></t>
<t>natEvent<list counter="1" hangIndent="5">
<t>Integer. This field contains the data (unsigned8) of natEvent
(230) defined in IPFIX, right justified, and unused bits MUST be
set to zero. It indicates the allocation or deallocation of a
range of IP ports as follows:</t>
<t>1:<list counter="1" hangIndent="5">
<t>Allocation</t>
</list></t>
<t>2:<list counter="1" hangIndent="5">
<t>Deallocation</t>
</list></t>
</list></t>
<t>Reserved:<list counter="1" hangIndent="5">
<t>0.</t>
</list></t>
<t>IP-Port-Alloc TLV MUST be included as part of the IP-Port-Range
Attribute (refer to <xref target="sessionrange"></xref>), identified
as 241.TBD2.8.</t>
</section>
<section anchor="TLV8" title="IP-Port-Range-Start TLV">
<t>The format of IP-Port-Range-Start TLV is shown in <xref
target="tlv8"></xref>. This attribute carries IPFIX Information
Element 361, "portRangeStart", which is the smallest port number of
a range of contiguous transport ports (refer to <xref
target="IPFIX"></xref>).</t>
<figure anchor="tlv8">
<preamble></preamble>
<artwork><![CDATA[
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| TLV-Type | Length | portRangeStart
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
portRangeStart |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
]]></artwork>
<postamble></postamble>
</figure>
<t>TLV-Type<list counter="1" hangIndent="5">
<t>9</t>
</list></t>
<t>Length<list counter="1" hangIndent="5">
<t>6</t>
</list></t>
<t>portRangeStart<list counter="1" hangIndent="5">
<t>Integer. This field contains the data (unsigned16) of (361)
defined in IPFIX, right justified, and unused bits MUST be set
to zero.</t>
</list></t>
<t>IP-Port-Range-Start TLV is included as part of the IP-Port-Range
Attribute (refer to <xref target="sessionrange"></xref>), identified
as 241.TBD2.9.</t>
</section>
<section anchor="TLV9" title="IP-Port-Range-End TLV">
<t>The format of IP-Port-Range-End TLV is shown in <xref
target="tlv9"></xref>. This attribute carries IPFIX Information
Element 362, "portRangeEnd", which is the largest port number of a
range of contiguous transport ports (refer to <xref
target="IPFIX"></xref>).</t>
<figure anchor="tlv9">
<preamble></preamble>
<artwork><![CDATA[
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| TLV-Type | Length | portRangeEnd
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
portRangeEnd |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
]]></artwork>
<postamble></postamble>
</figure>
<t>TLV-Type<list counter="1" hangIndent="5">
<t>10</t>
</list></t>
<t>Length<list counter="1" hangIndent="5">
<t>6</t>
</list></t>
<t>portRangeEnd<list counter="1" hangIndent="5">
<t>Integer. This field contains the data (unsigned16) of (362)
defined in IPFIX, right justified, and unused bits MUST be set
to zero.</t>
</list></t>
<t>IP-Port-Range-End TLV is included as part of the IP-Port-Range
Attribute (refer to <xref target="sessionrange"></xref>), identified
as 241.TBD2.10.</t>
</section>
<section anchor="TLV10" title="IP-Port-Local-Id TLV">
<t>The format of IP-Port-Local-Id TLV is shown in <xref
target="tlv10"></xref>. This attribute carries a string
called "localID", which is a local significant
identifier as explained below.</t>
<t>The primary issue addressed by this TLV is that
there are CGN deployments that do not distinguish internal hosts by
their internal IP address alone, but use further identifiers for unique
subscriber identification. For example, this is the case if a CGN
supports overlapping private or shared IP address spaces
(refer to <xref target="RFC1918"></xref> and
<xref target="RFC6598"></xref>) for internal hosts of different subscribers. In such
cases, different internal hosts are identified and mapped at the CGN
by their IP address and/or another identifier, for example, the
identifier of a
tunnel between the CGN and the subscriber. In these scenarios (and
similar ones), the internal IP address is not sufficient to demultiplex connections from internal
hosts. An additional identifier needs to be present in the
IP-Port-Range Attribute
and IP-Port-Forwarding-Mapping Attribute in order to uniquely
identify an internal host. The
IP-Port-Local-Id TLV is used to carry this identifier. </t>
<figure anchor="tlv10">
<preamble></preamble>
<artwork><![CDATA[
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| TLV-Type | Length | localID ....
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
]]></artwork>
<postamble></postamble>
</figure>
<t>TLV-Type<list counter="1" hangIndent="5">
<t>11</t>
</list></t>
<t>Length<list counter="1" hangIndent="5">
<t>Variable number of bytes.</t>
</list></t>
<t>localID<list counter="1" hangIndent="5">
<t>string. The data type of this field is string
(refer to <xref target="I-D.ietf-radext-datatypes"></xref>).
This field contains the data that is a local session
identifier at the customer premise, such as MAC address,
interface ID, VLAN ID, PPP sessions ID, VRF ID,
IP address/prefix, etc.</t>
</list></t>
<t>IP-Port-Local-Id TLV MAY be included in the following
Attributes:<list style="symbols">
<t>IP-Port-Range Attribute, identified as 241.TBD2.11 (see
Section 3.1.2).</t>
<t>IP-Port-Forwarding-Mapping Attribute, identified as
241.TBD3.11 (see Section 3.1.3).</t>
</list></t>
</section>
</section>
</section>
<section title="Applications, Use Cases and Examples">
<t>This section describes some applications and use cases to illustrate
the use of the attributes proposed in this document.</t>
<section title="Managing CGN Port Behavior using RADIUS">
<t>In a broadband network, customer information is usually stored on a
RADIUS server, and the BNG acts as a NAS. The communication between
the NAS and the RADIUS server is triggered by a user when it signs in
to the Internet service, where either PPP or DHCP/DHCPv6 is used. When
a user signs in, the NAS sends a RADIUS Access-Request message to the
RADIUS server. The RADIUS server validates the request, and if the
validation succeeds, it in turn sends back a RADIUS Access-Accept
message. The Access-Accept message carries configuration information
specific to that user, back to the NAS, where some of the information
would pass on to the requesting user via PPP or DHCP/DHCPv6.</t>
<t>A CGN function in a broadband network is most likely co-located
on a BNG. In that case, parameters for CGN port mapping
behavior for users can be configured on the RADIUS server. When a user
signs in to the Internet service, the associated parameters can be
conveyed to the NAS, and proper configuration is accomplished on the
CGN device for that user.</t>
<t>Also, CGN operation status such as CGN port allocation
and deallocation for a specific user on the BNG can also be
transmitted back to the RADIUS server for accounting purpose using the
RADIUS protocol.</t>
<t>RADIUS protocol has already been widely deployed in broadband
networks to manage BNG, thus the functionality described in this
specification introduces little overhead to the existing network
operation.</t>
<t>In the following sub-sections, we describe how to manage CGN
behavior using RADIUS protocol, with required RADIUS extensions
proposed in <xref target="attrs"></xref>.</t>
<section title="Configure IP Port Limit for a User">
<t>In the face of IPv4 address shortage, there are currently
proposals to multiplex multiple users' connections over a smaller
number of shared IPv4 addresses, such as Carrier Grade NAT <xref
target="RFC6888"></xref>, Dual-Stack Lite <xref
target="RFC6333"></xref>, NAT64 <xref target="RFC6146"></xref>, etc.
As a result, a single IPv4 public address may be shared by hundreds
or even thousands of users. As indicated in <xref
target="RFC6269"></xref>, it is therefore necessary to impose limits
on the total number of ports available to an individual user to
ensure that the shared resource, i.e., the IPv4 address, remains
available in some capacity to all the users using it. The support of
IP port limit is also documented in <xref target="RFC6888"></xref>
as a requirement for CGN.</t>
<t>The IP port limit imposed to an end user may be on the total number of IP source transport ports, or a
specific IP transport protocol as defined in <xref
target="sessionlimit"></xref>.</t>
<t>The per-user based IP port limit is configured on a RADIUS
server, along with other user information such as credentials. The
value of this IP port limit is based on service agreement and its
specification is out of the scope of this document.</t>
<t>When a user signs in to the Internet service successfully, the IP
port limit for the subscriber is passed by the RADIUS server to the
BNG, acting as a NAS and co-located with the CGN, using a new RADIUS
attribute called IP-Port-Limit-Info (defined in <xref
target="sessionlimit"></xref>), along with other configuration
parameters. While some parameters are passed to the user, the IP
port limit is recorded on the CGN device for imposing the usage of IP transport ports for that user.</t>
<t><xref target="fig1"></xref> illustrates how RADIUS protocol is
used to configure the maximum number of TCP/UDP ports for a given
user on a NAT44 device.</t>
<t><figure anchor="fig1" height=""
title="RADIUS Message Flow for Configuring NAT44 Port Limit">
<artwork><![CDATA[
User NAT44/NAS AAA
| BNG Server
| | |
| | |
|----Service Request------>| |
| | |
| |-----Access-Request -------->|
| | |
| |<----Access-Accept-----------|
| | (IP-Port-Limit-Info) |
| | (for TCP/UDP ports) |
|<---Service Granted ------| |
| (other parameters) | |
| | |
| (NAT44 external port |
| allocation and |
| IPv4 address assignment) |
| | |
]]></artwork>
</figure></t>
<t>The IP port limit created on a CGN device for a specific user
using RADIUS extension may be changed using RADIUS CoA message <xref
target="RFC5176"></xref> that carries the same RADIUS attribute. The
CoA message may be sent from the RADIUS server directly to the NAS,
which once accepts and sends back a RADIUS CoA ACK message, the new
IP port limit replaces the previous one.</t>
<t><xref target="fig2"></xref> illustrates how RADIUS protocol is
used to increase the TCP/UDP port limit from 1024 to 2048 on a NAT44
device for a specific user.</t>
<t><figure anchor="fig2" height=""
title="RADIUS Message Flow for changing a user's NAT44 port limit">
<artwork><![CDATA[
User NAT44/NAS AAA
| BNG Server
| | |
| TCP/UDP Port Limit (1024) |
| | |
| |<---------CoA Request----------|
| | (IP-Port-Limit-Info) |
| | (for TCP/UDP ports) |
| | |
| TCP/UDP Port Limit (2048) |
| | |
| |---------CoA Response--------->|
| | |
]]></artwork>
</figure></t>
</section>
<section title="Report IP Port Allocation/Deallocation">
<t>Upon obtaining the IP port limit for a user, the CGN device needs
to allocate an IP transport port for the user when
receiving a new IP flow sent from that user.</t>
<t>As one practice, a CGN may allocate a block of IP ports for a specific user, instead of one
port at a time, and within each port block, the
ports may be randomly distributed or in consecutive
fashion. When a CGN device allocates a block of transport
ports, the information can be easily conveyed to the RADIUS
server by a new RADIUS attribute called the IP-Port-Range (defined
in <xref target="sessionrange"></xref>).
The CGN device may allocate
one or more IP port ranges, where each range contains a set of
numbers representing IP transport ports, and the
total number of ports MUST be less or equal to the
associated IP port limit imposed for that user. A CGN device may
choose to allocate a small port range, and allocate more at a later
time as needed; such practice is good because its
randomization in nature.</t>
<t>At the same time, the CGN device also needs to decide the shared
IPv4 address for that user. The shared IPv4 address and the
pre-allocated IP port range are both passed to the RADIUS
server.</t>
<t>When a user initiates an IP flow, the CGN device randomly selects
a transport port number from the associated and
pre-allocated IP port range for that user to replace the original
source port number, along with the replacement
of the source IP address by the shared IPv4 address.</t>
<t>A CGN device may decide to "free" a previously assigned set of
IP ports that have been allocated for a
specific user but not currently in use, and with that, the CGN
device must send the information of the deallocated IP port range
along with the shared IPv4 address to the RADIUS server.</t>
<t><xref target="fig3"></xref> illustrates how RADIUS protocol is
used to report a set of ports allocated and deallocated,
respectively, by a NAT44 device for a specific user to the RADIUS
server.</t>
<t><figure anchor="fig3" height=""
title="RADIUS Message Flow for reporting NAT44 allocation/deallocation of a port set">
<artwork><![CDATA[
Host NAT44/NAS AAA
| BNG Server
| | |
| | |
|----Service Request------>| |
| | |
| |-----Access-Request -------->|
| | |
| |<----Access-Accept-----------|
|<---Service Granted ------| |
| (other parameters) | |
... ... ...
| | |
| | |
| (NAT44 decides to allocate |
| a TCP/UDP port range for the user) |
| | |
| |-----Accounting-Request----->|
| | (IP-Port-Range |
| | for allocation) |
... ... ...
| | |
| (NAT44 decides to deallocate |
| a TCP/UDP port range for the user) |
| | |
| |-----Accounting-Request----->|
| | (IP-Port-Range |
| | for deallocation) |
| | |
]]></artwork>
</figure></t>
<t></t>
</section>
<section title="Configure Forwarding Port Mapping">
<t>In most scenarios, the port mapping on a NAT device is
dynamically created when the IP packets of an IP connection
initiated by a user arrives. For some applications, the port mapping
needs to be pre-defined allowing IP packets of applications from
outside a CGN device to pass through and "port forwarded" to the
correct user located behind the CGN device.</t>
<t>Port Control Protocol <xref target="RFC6887"> </xref>, provides a
mechanism to create a mapping from an external IP address and port
to an internal IP address and port on a CGN device just to achieve
the "port forwarding" purpose. PCP is a server-client protocol
capable of creating or deleting a mapping along with a rich set of
features on a CGN device in dynamic fashion. In some deployment, all
users need is a few, typically just one pre-configured port mapping
for applications such as web cam at home, and the lifetime of such a
port mapping remains valid throughout the duration of the customer's
Internet service connection time. In such an environment, it is
possible to statically configure a port mapping on the RADIUS server
for a user and let the RADIUS protocol to propagate the information
to the associated CGN device.</t>
<t><xref target="fig4"></xref> illustrates how RADIUS protocol is
used to configure a forwarding port mapping on a NAT44 device by
using RADIUS protocol.</t>
<t><figure anchor="fig4" height=""
title="RADIUS Message Flow for configuring a forwarding port mapping">
<artwork><![CDATA[
Host NAT/NAS AAA
| BNG Server
| | |
|----Service Request------>| |
| | |
| |---------Access-Request------->|
| | |
| |<--------Access-Accept---------|
| | (IP-Port-Forwarding-Map) |
|<---Service Granted ------| |
| (other parameters) | |
| | |
| (Create a port mapping |
| for the user, and |
| associate it with the |
| internal IP address |
| and external IP address) |
| | |
| | |
| |------Accounting-Request------>|
| | (IP-Port-Forwarding-Map) |
]]></artwork>
</figure></t>
<t>A port forwarding mapping that is created on a CGN device using
RADIUS extension as described above may also be changed using RADIUS
CoA message <xref target="RFC5176"></xref> that carries the same
RADIUS associate. The CoA message may be sent from the RADIUS server
directly to the NAS, which once accepts and sends back a RADIUS CoA
ACK message, the new port forwarding mapping then replaces the
previous one.</t>
<t><xref target="fig5"></xref> illustrates how RADIUS protocol is
used to change an existing port mapping from (a:X) to (a:Y), where
"a" is an internal port, and "X" and "Y" are external ports,
respectively, for a specific user with a specific IP address</t>
<t><figure anchor="fig5" height=""
title="RADIUS Message Flow for changing a user's forwarding port mapping">
<artwork><![CDATA[
Host NAT/NAS AAA
| BNG Server
| | |
| Internal IP Address |
| Port Map (a:X) |
| | |
| |<---------CoA Request----------|
| | (IP-Port-Forwarding-Map) |
| | |
| Internal IP Address |
| Port Map (a:Y) |
| | |
| |---------CoA Response--------->|
| | (IP-Port-Forwarding-Map) |
]]></artwork>
</figure></t>
</section>
<section title="An Example">
<t>An Internet Service Provider (ISP) assigns TCP/UDP 500 ports for
the user Joe. This number is the limit that can be used for TCP/UDP
ports on a NAT44 device for Joe, and is configured on a RADIUS
server. Also, Joe asks for a pre-defined port forwarding mapping on
the NAT44 device for his web cam applications (external port 5000
maps to internal port 80).</t>
<t>When Joe successfully connects to the Internet service, the
RADIUS server conveys the TCP/UDP port limit (1000) and the
forwarding port mapping (external port 5000 to internal port 80) to
the NAT44 device, using IP-Port-Limit-Info Attribute and
IP-Port-Forwarding-Map attribute, respectively, carried by an
Access-Accept message to the BNG where NAS and CGN co-located.</t>
<t>Upon receiving the first outbound IP packet sent from Joe's
laptop, the NAT44 device decides to allocate a small port pool that
contains 40 consecutive ports, from 3500 to 3540, inclusively, and
also assign a shared IPv4 address 192.0.2.15, for Joe. The NAT44
device also randomly selects one port from the allocated range (say
3519) and use that port to replace the original source port in
outbound IP packets.</t>
<t>For accounting purpose, the NAT44 device passes this port range
(3500-3540) and the shared IPv4 address 192.0.2.15 together to the
RADIUS server using IP-Port-Range attribute carried by an
Accounting-Request message.</t>
<t>When Joe works on more applications with more outbound IP
sessions and the port pool (3500-3540) is close to exhaust, the
NAT44 device allocates a second port pool (8500-8800) in a similar
fashion, and also passes the new port range (8500-8800) and IPv4
address 192.0.2.15 together to the RADIUS server using IP-Port-Range
attribute carried by an Accounting-Request message. Note when the
CGN allocates more ports, it needs to assure that the total number
of ports allocated for Joe is within the limit.</t>
<t>Joe decides to upgrade his service agreement with more TCP/UDP
ports allowed (up to 1000 ports). The ISP updates the information in
Joe's profile on the RADIUS server, which then sends a CoA-Request
message that carries the IP-Port-Limit-Info Attribute with 1000
ports to the NAT44 device; the NAT44 device in turn sends back a
CoA-ACK message. With that, Joe enjoys more available TCP/UDP ports
for his applications.</t>
<t>When Joe travels, most of the IP sessions are closed with their
associated TCP/UDP ports released on the NAT44 device, which then
sends the relevant information back to the RADIUS server using
IP-Port-Range attribute carried by Accounting-Request message.</t>
<t>Throughout Joe's connection with his ISP Internet service,
applications can communicate with his web cam at home from external
realm directly traversing the pre-configured mapping on the CGN
device.</t>
<t>When Joe disconnects from his Internet service, the CGN device
will deallocate all TCP/UDP ports as well as the port-forwarding
mapping, and send the relevant information to the RADIUS server.</t>
</section>
</section>
<section title="Report Assigned Port Set for a Visiting UE">
<t><xref target="wifi"></xref> illustrates an example of the flow
exchange which occurs when a visiting UE connects to a CPE offering
WLAN service.</t>
<t>For identification purposes (see <xref target="RFC6967"></xref>),
once the CPE assigns a port set, it issues a RADIUS message to report
the assigned port set.</t>
<t><figure anchor="wifi" height=""
title="RADIUS Message Flow for reporting CPE allocation/deallocation of a port set to a visiting UE">
<artwork><![CDATA[
UE CPE NAS AAA
| BNG Server
| | |
| | |
|----Service Request------>| |
| | |
| |-----Access-Request -------->|
| | |
| |<----Access-Accept-----------|
|<---Service Granted ------| |
| (other parameters) | |
... | ... ...
|<---IP@----| | |
| | | |
| (CPE assigns a TCP/UDP port |
| range for this visiting UE) |
| | |
| |--Accounting-Request-...------------------->|
| | (IP-Port-Range |
| | for allocation) |
... | ... ...
| | | |
| | | |
| (CPE withdraws a TCP/UDP port |
| range for a visiting UE) |
| | |
| |--Accounting-Request-...------------------->|
| | (IP-Port-Range |
| | for deallocation) |
| | |
]]></artwork>
</figure></t>
<t></t>
</section>
</section>
<section anchor="Table" title="Table of Attributes">
<t>This document proposes three new RADIUS attributes and their formats
are as follows:</t>
<t><list style="symbols">
<t>IP-Port-Limit-Info: 241.TBD1.</t>
<t>IP-Port-Range: 241.TBD2.</t>
<t>IP-Port-Forwarding-Map: 241.TBD3.</t>
</list></t>
<t>Note to IANA: it is assumed that Extended-Type-1 "241" will be used
for these attributes.</t>
<t>The following table provides a guide as what type of RADIUS packets
that may contain these attributes, and in what quantity.</t>
<texttable style="none">
<ttcol>Request</ttcol>
<ttcol>Accept</ttcol>
<ttcol>Reject</ttcol>
<ttcol>Challenge</ttcol>
<ttcol>Acct. Request</ttcol>
<ttcol>#</ttcol>
<ttcol>Attribute</ttcol>
<c>0+</c>
<c>0+</c>
<c>0</c>
<c>0</c>
<c>0+</c>
<c>TBA</c>
<c>IP-Port-Limit-Info</c>
<c>0</c>
<c>0</c>
<c>0</c>
<c>0</c>
<c>0+</c>
<c>TBA</c>
<c>IP-Port-Range</c>
<c>0+</c>
<c>0+</c>
<c>0</c>
<c>0</c>
<c>0+</c>
<c>TBA</c>
<c>IP-Port-Forwarding-Map</c>
</texttable>
<t>The following table defines the meaning of the above table
entries.</t>
<t></t>
<texttable style="none" suppress-title="true">
<ttcol></ttcol>
<ttcol></ttcol>
<c>0</c>
<c>This attribute MUST NOT be present in packet.</c>
<c>0+</c>
<c>Zero or more instances of this attribute MAY be present in
packet.</c>
<!--<c>0-1</c>
<c>Zero or one instance of this attribute MAY be present in packet.</c> -->
</texttable>
</section>
<section anchor="Security" title="Security Considerations">
<t>This document does not introduce any security issue other than the
ones already identified in RADIUS <xref target="RFC2865"></xref> and
<xref target="RFC5176"></xref> for CoA messages. Known RADIUS
vulnerabilities apply to this specification. For example, if RADIUS
packets are sent in the clear, an attacker in the communication path
between the RADIUS client and server may glean information that it will
use to prevent a legitimate user to access the service by appropriately
setting the maximum number of IP ports conveyed in an
IP-Port-Limit-Info
Attribute, exhaust the port quota of a user by installing many mapping
entries (IP-Port-Forwarding-Map Attribute), prevent incoming traffic to
be delivered to its legitimate destination by manipulating the mapping
entries installed by means of an IP-Port-Forwarding-Map Attribute,
discover the IP address and port range assigned to a given user and
which is reported in an IP-Port-Range Attribute, etc. The root cause of
these attack vectors is the communication between the RADIUS client and
server.</t>
<t>The IP-Port-Local-Id TLV includes an identifier of which the
type and length is deployment and implementation dependent.
This identifier might carry privacy sensitive information. It is therefore RECOMMENDED to utilize identifiers that do not have
such privacy concerns.</t>
<t>This document targets deployed where a trusted relationship is in
place between the RADIUS client and server with communication optionally
secured by IPsec or Transport Layer Security (TLS) <xref
target="RFC6614"></xref>.</t>
</section>
<section anchor="IANA" title="IANA Considerations">
<t>This document requires new code point assignments for both IPFIX
Information Elements and RADIUS attributes as explained in the following
sub-sections.</t>
<t>It is assumed that Extended-Type-1 "241" will be used for RADIUS
attributes in <xref target="IPFIX-RADIUS"></xref>.</t>
<section anchor="IPFIX-IANA"
title="IANA Considerations on New IPFIX Information Elements">
<t>The following is a new IPFIX Information
Element as requested by this document:<list style="symbols">
<t>sourceTransportPortsLimit (refer to <xref target="TLV2"></xref>): <list style="symbols">
<t>Name: sourceTransportPortsLimit. </t>
<t>Element ID: TBAx1.</t>
<t>Description: This Information Element contains
the maximum number of IP source transport ports that
is a limit for an end user to use and is associated
with one or more IPv4 or IPv6 addresses.
</t>
<t>Data type: unsigned16. </t>
<t>Data type semantics: totalCounter. </t>
<t>Data type unit: ports. </t>
<t>Data value range: from 1 to 65535.</t>
</list></t>
</list></t>
</section>
<section anchor="IPFIX-RADIUS"
title="IANA Considerations on New RADIUS Attributes">
<t>The authors request that Attribute Types and Attribute Values
defined in this document be registered by the Internet Assigned
Numbers Authority (IANA) from the RADIUS namespaces as described in
the "IANA Considerations" section of <xref target="RFC3575"></xref>,
in accordance with BCP 26 <xref target="RFC5226"></xref>. For RADIUS
packets, attributes and registries created by this document IANA is
requested to place them at
http://www.iana.org/assignments/radius-types.</t>
<t>In particular, this document defines three new RADIUS attributes,
entitled "IP-Port-Limit-Info" (see <xref
target="sessionlimit"></xref>), "IP-Port-Range" (see <xref
target="sessionrange"></xref>) and "IP-Port-Forwarding-Map" (see <xref
target="portmap"></xref>), with assigned values of 241.TBD1, 241.TBD2
and 241.TBD3 from the Short Extended Space of <xref
target="RFC6929"></xref>: <figure>
<artwork><![CDATA[ Type Name Meaning
---- ---- -------
241.TBD1 IP-Port-Limit-Info see Section 3.1.1
241.TBD2 IP-Port-Range see Section 3.1.2
241.TBD3 IP-Port-Forwarding-Map see Section 3.1.3
]]></artwork>
</figure></t>
<t></t>
</section>
<section title="IANA Considerations on New RADIUS TLVs">
<t>This specification requests allocation of the following TLVs:</t>
<t><figure>
<artwork><![CDATA[
Name Value Meaning
---- ----- -------
IP-Port-Type 1 see Section 3.2.1
IP-Port-Limit 2 see Section 3.2.2
IP-Port-Ext-IPv4-Addr 3 see Section 3.2.3
IP-Port-Int-IPv4-Addr 4 see Section 3.2.4
IP-Port-Int-IPv6-Addr 5 see Section 3.2.5
IP-Port-Int-Port 6 see Section 3.2.6
IP-Port-Ext-Port 7 see Section 3.2.7
IP-Port-Alloc 8 see Section 3.2.8
IP-Port-Range-Start 9 see Section 3.2.9
IP-Port-Range-End 10 see Section 3.2.10
IP-Port-Local-Id 11 see Section 3.2.11
]]></artwork>
</figure></t>
</section>
</section>
<section title="Acknowledgements">
<t>Many thanks to Dan Wing, Roberta Maglione, Daniel Derksen, David
Thaler, Alan Dekok, Lionel Morand, and Peter Deacon for their useful
comments and suggestions.</t>
<t>Special thanks to Lionel Morand for the Shepherd review and to
Kathleen Moriarty for the AD review.</t>
</section>
</middle>
<back>
<references title="Normative References">
&RFC2119;
&RFC2865;
<?rfc include='reference.RFC.6929'?>
<?rfc include='reference.RFC.7012'?>
<?rfc include='reference.RFC.3575'?>
<?rfc include='reference.RFC.5226'?>
<?rfc include='reference.I-D.ietf-radext-datatypes'?>
<reference anchor="IPFIX"
target="http://www.iana.org/assignments/ipfix/ipfix.xhtml">
<front>
<title>IP Flow Information Export (IPFIX) Entities
</title>
<author fullname="" surname="">
<organization>IANA</organization>
</author>
<date day="" month="" year="" />
</front>
</reference>
<reference anchor="ProtocolNumbers"
target="http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml">
<front>
<title>Service Name and Transport Protocol Port Number
</title>
<author fullname="" surname="">
<organization>IANA</organization>
</author>
<date day="" month="" year="" />
</front>
</reference>
</references>
<references title="Informative References">
<?rfc include='reference.RFC.3022'?>
<?rfc include='reference.RFC.5176'?>
<?rfc include='reference.RFC.6887'?>
<?rfc include='reference.I-D.gundavelli-v6ops-community-wifi-svcs'?>
<?rfc include='reference.RFC.6967'?>
<?rfc include='reference.RFC.6888'?>
<?rfc include='reference.RFC.6614'?>
<?rfc include='reference.RFC.4960'?>
<?rfc include='reference.RFC.4340'?>
<?rfc include='reference.RFC.1918'?>
<?rfc include='reference.RFC.6598'?>
&RFC6146;
&RFC6269;
&RFC6333;
<reference anchor="TR-146"
target="http://www.broadband-forum.org/technical/download/TR-146.pdf">
<front>
<title>TR-146: Subscriber Sessions</title>
<author fullname="" surname="">
<organization>Broadband Forum</organization>
</author>
<date day="" month="" year="" />
</front>
</reference>
<!-- &I-D.miles-behave-l2nat;-->
</references>
</back>
</rfc>
| PAFTECH AB 2003-2026 | 2026-04-23 20:56:17 |