One document matched: draft-ietf-oauth-v2-15.xml
<?xml version='1.0' encoding='UTF-8' ?>
<!DOCTYPE rfc SYSTEM 'rfc2629.dtd'>
<?xml-stylesheet type='text/xsl' href='rfc2629.xslt' ?>
<rfc category='std' ipr='trust200902' obsoletes='5849' docName='draft-ietf-oauth-v2-15'>
<?rfc strict='yes' ?>
<?rfc toc='yes' ?>
<?rfc tocdepth='2' ?>
<?rfc symrefs='yes' ?>
<?rfc sortrefs='yes' ?>
<?rfc compact='yes' ?>
<?rfc subcompact='yes' ?>
<front>
<title abbrev='OAuth 2.0'>The OAuth 2.0 Authorization Protocol</title>
<author fullname='Eran Hammer-Lahav' surname='Hammer-Lahav' initials='E' role='editor'>
<organization>Yahoo!</organization>
<address>
<email>eran@hueniverse.com</email>
<uri>http://hueniverse.com</uri>
</address>
</author>
<author fullname='David Recordon' surname='Recordon' initials='D'>
<organization>Facebook</organization>
<address>
<email>dr@fb.com</email>
<uri>http://www.davidrecordon.com/</uri>
</address>
</author>
<author fullname='Dick Hardt' surname='Hardt' initials='D'>
<organization>Microsoft</organization>
<address>
<email>dick.hardt@gmail.com</email>
<uri>http://dickhardt.org/</uri>
</address>
</author>
<date year='2011' />
<abstract>
<t>
The OAuth 2.0 authorization protocol enables granting third-party applications limited
access to HTTP service on behalf of an end-user by orchestrating an approval interaction
between the end-user and the HTTP service.
</t>
</abstract>
</front>
<middle>
<section title='Introduction'>
<t>
In the traditional client-server authentication model, the client accesses a protected
resource on the server by authenticating with the server using the resource owner's
credentials. In order to provide third-party applications access to protected resources,
the resource owner shares its credentials with the third-party. This creates several
problems and limitations:
</t>
<t>
<list style='symbols'>
<t>
Third-party applications are required to store the resource-owner's credentials
for future use, typically a password in clear-text.
</t>
<t>
Servers are required to support password authentication, despite the security
weaknesses created by passwords.
</t>
<t>
Third-party applications gain overly broad access to the resource-owner's protected
resources, leaving resource owners without any ability to restrict duration or access
to a limited subset of resources.
</t>
<t>
Resource owners cannot revoke access to an individual third-party without revoking
access to all third-parties, and must do so by changing their password.
</t>
</list>
</t>
<t>
OAuth addresses these issues by introducing an authorization layer and separating the role
of the client from that of the resource owner. In OAuth, the client requests access to
resources controlled by the resource owner and hosted by the resource server, and is issued
a different set of credentials than those of the resource owner.
</t>
<t>
Instead of using the resource owner's credentials to access protected resources, the client
obtains an access token - a string denoting a specific scope, duration, and other access
attributes. Access tokens are issued to third-party clients by an authorization server with
the approval of the resource owner. The client uses the access token to access the
protected resources hosted by the resource server.
</t>
<t>
For example, a web end-user (resource owner) can grant a printing service (client) access
to her protected photos stored at a photo sharing service (resource server), without
sharing her username and password with the printing service. Instead, she authenticates
directly with a server trusted by the photo sharing service (authorization server) which
issues the printing service delegation-specific credentials (access token).
</t>
<t>
This specification is designed for use with HTTP <xref target='RFC2616' />. The use of
OAuth with any transport protocol other than HTTP is undefined.
</t>
<section title='Roles'>
<t>
OAuth includes four roles working together to grant and provide access to protected
resources - access restricted resources which require authentication to access:
</t>
<t>
<list style='hanging'>
<t hangText='resource owner'>
<vspace />
An entity capable of granting access to a protected resource. When the resource owner
is a person, it is referred to as an end-user.
</t>
<t hangText='resource server'>
<vspace />
The server hosting the protected resources, capable of accepting and responding to
protected resource requests using access tokens.
</t>
<t hangText='client'>
<vspace />
An application making protected resource requests on behalf of the resource owner and
with its authorization.
</t>
<t hangText='authorization server'>
<vspace />
The server issuing access tokens to the client after successfully authenticating the
resource owner and obtaining authorization.
</t>
</list>
</t>
<t>
The interaction between the authorization server and resource server is beyond the scope
of this specification. The authorization server may be the same server as the resource
server or a separate entity. A single authorization server may issue access tokens
accepted by multiple resource servers.
</t>
</section>
<section title='Protocol Flow'>
<t>
When interacting with the authorization server, the client identifies itself using a set
of client credentials which include a client identifier and other authentication
attributes. The means through which the client obtains its credentials are beyond the
scope of this specification, but typically involve registration with the authorization
server.
</t>
<figure title='Abstract Protocol Flow' anchor='Figure-1'>
<artwork>
<![CDATA[
+--------+ +---------------+
| |--(A)- Authorization Request ->| Resource |
| | | Owner |
| |<-(B)-- Authorization Grant ---| |
| | +---------------+
| |
| | Authorization Grant & +---------------+
| |--(C)--- Client Credentials -->| Authorization |
| Client | | Server |
| |<-(D)----- Access Token -------| |
| | +---------------+
| |
| | +---------------+
| |--(E)----- Access Token ------>| Resource |
| | | Server |
| |<-(F)--- Protected Resource ---| |
+--------+ +---------------+
]]>
</artwork>
</figure>
<t>
The abstract flow illustrated in <xref target='Figure-1' /> describes the interaction
between the four roles and includes the following steps:
</t>
<t>
<list style='format (%C)'>
<t>
The client requests authorization from the resource owner. The authorization request
can be made directly to the resource owner (as shown), or preferably indirectly via
an intermediary such as an authorization server.
</t>
<t>
The client receives an authorization grant which represents the authorization
provided by the resource owner. The authorization grant type depends on the method used by
the client and supported by the authorization server to obtain it.
</t>
<t>
The client requests an access token by authenticating with the authorization server
using its client credentials (prearranged between the client and authorization
server) and presenting the authorization grant.
</t>
<t>
The authorization server validates the client credentials and the authorization grant, and
if valid issues an access token.
</t>
<t>
The client requests the protected resource from the resource server and authenticates
by presenting the access token.
</t>
<t>
The resource server validates the access token, and if valid, serves the request.
</t>
</list>
</t>
</section>
<section title='Access Token'>
<t>
An access token is a string representing an authorization issued to the client. The
string is usually opaque to the client. Tokens represent specific scopes and durations of
access, granted by the resource owner, and enforced by the resource server and
authorization server.
</t>
<t>
The token may denote an identifier used to retrieve the authorization information, or
self-contain the authorization information in a verifiable manner (i.e. a token string
consisting of some data and a signature). Additional authentication credentials may be
required in order for the client to use a token.
</t>
<t>
The access token provides an abstraction layer, replacing different authorization
constructs (e.g. username and password) with a single token understood by the resource
server. This abstraction enables issuing access tokens more restrictive than the
authorization grant used to obtain them, as well as removing the resource server's need to
understand a wide range of authentication methods.
</t>
<t>
Access tokens can have different formats, structures, and methods of utilization (e.g.
cryptographic properties) based on the resource server security requirements. Access token
attributes and the methods used to access protected resources are beyond the scope of this
specification and are defined by companion specifications.
</t>
</section>
<section title='Authorization Grant'>
<t>
An authorization grant is a general term used to describe the intermediate credentials
representing the resource owner authorization (to access its protected resources), and
serves as an abstraction layer. An authorization grant is used by the client to obtain
an access token.
</t>
<t>
This specification defines four grant types: authorization code, implicit, resource owner
password credentials, and client credentials, as well as an extensibility mechanism for
defining additional types.
</t>
<section title='Authorization Code'>
<t>
The authorization code is obtained by using an authorization server as an intermediary
between the client and resource owner. Instead of requesting authorization directly
from the resource owner, the client directs the resource owner to an authorization
server (via its user-agent as defined in <xref target='RFC2616' />), which in turns
directs the resource owner back to the client with the authorization code.
</t>
<t>
Before directing the resource owner back to the client with the authorization code, the
authorization server authenticates the resource owner and obtains authorization.
Because the resource owner only authenticates with the authorization server, the
resource owner's credentials are never shared with the client.
</t>
<t>
The authorization code provides a few important security benefits such as the ability to
authenticate the client and issuing the access token directly to the client without
potentially exposing it to others, including the resource owner.
</t>
</section>
<section title='Implicit'>
<t>
When an access token is issued to the client directly as the result of the resource
owner authorization, without an intermediary authorization grant (such as an
authorization code), the grant is considered implicit.
</t>
<t>
When issuing an implicit grant, the authorization server cannot verify the identity of
the client, and the access token may be exposed to the resource owner or other
applications with access to the resource owner's user-agent.
</t>
<t>
Implicit grants improve the responsiveness and efficiency of some clients (such as a
client implemented as an in-browser application) since it reduces the number of round
trips required to obtain an access token.
</t>
</section>
<section title="Resource Owner Password Credentials">
<t>
The resource owner password credentials (e.g. a username and password) can be used
directly as an authorization grant to obtain an access token. The credentials should
only be used when there is a high degree of trust between the resource owner and the
client (e.g. its computer operating system or a highly privileged application), and
when other authorization grant types are not available (such as an authorization code).
</t>
<t>
Even though this grant type requires direct client access to the resource owner
credentials, the resource owner credentials are used for a single request and are
exchanged for an access token. Unlike the HTTP Basic authentication scheme defined in
<xref target='RFC2617' />, this grant type (when combined with a refresh token)
eliminates the need for the client to store the resource-owner credentials for future
use.
</t>
</section>
<section title='Client Credentials'>
<t>
The client credentials can be used as an authorization grant when the authorization
scope is limited to the protected resources under the control of the client, or to
protected resources previously arranged with the authorization server. Client
credentials are used as an authorization grant typically when the client is acting on
its own behalf (the client is also the resource owner).
</t>
</section>
<section title='Extensions'>
<t>
Additional grant types may be defined to provide a bridge between OAuth and other
protocols. For example, <xref target='I-D.ietf-oauth-saml2-bearer' /> defines a
<xref target='OASIS.saml-core-2.0-os'>SAML 2.0</xref> bearer assertion grant type,
which can be used to obtain an access token.
</t>
</section>
</section>
<section title='Refresh Token'>
<t>
A refresh token is optionally issued by the authorization server to the client together
with an access token. The client can use the refresh token to request another access
token based on the same authorization, without having to involve the resource owner
again, or having to retain the original authorization grant used to obtain the initial
access token.
</t>
<t>
A refresh token is a string representing the authorization granted to the client by the
resource owner. The string is usually opaque to the client. The token may denote an
identifier used to retrieve the authorization information, or self-contain the
authorization information in a verifiable manner. The refresh token is bound to the
client it was issued to, and its usage requires client authentication.
</t>
<t>
The refresh token can be used to obtain a new access token when the current access token
expires (access tokens may have a shorter lifetime than authorized by the resource
owner), no longer valid, or to obtain additional access tokens with identical or narrower
scope.
</t>
<figure title='Refreshing an Expired Access Token' anchor='Figure-2'>
<artwork>
<![CDATA[
+--------+ Authorization Grant & +---------------+
| |--(A)-------- Client Credentials --------->| |
| | | |
| |<-(B)----------- Access Token -------------| |
| | & Refresh Token | |
| | | |
| | +----------+ | |
| |--(C)---- Access Token ---->| | | |
| | | | | |
| |<-(D)- Protected Resource --| Resource | | Authorization |
| Client | | Server | | Server |
| |--(E)---- Access Token ---->| | | |
| | | | | |
| |<-(F)- Invalid Token Error -| | | |
| | +----------+ | |
| | | |
| | Refresh Token & | |
| |--(G)-------- Client Credentials --------->| |
| | | |
| |<-(H)----------- Access Token -------------| |
+--------+ & Optional Refresh Token +---------------+
]]>
</artwork>
</figure>
<t>
The flow illustrated in <xref target='Figure-2' /> includes the following steps:
</t>
<t>
<list style='format (%C)'>
<t>
The client requests an access token by authenticating with the authorization server
using its client credentials, and presenting an authorization grant.
</t>
<t>
The authorization server validates the client credentials and the authorization
grant, and if valid issues an access token and a refresh token.
</t>
<t>
The client makes a protected resource requests to the resource server by presenting
the access token.
</t>
<t>
The resource server validates the access token, and if valid, serves the request.
</t>
<t>
Steps (C) and (D) repeat until the access token expires. If the client knows the
access token expired, it skips to step (G), otherwise it makes another protected
resource request.
</t>
<t>
Since the access token is invalid, the resource server returns an invalid token
error.
</t>
<t>
The client requests a new access token by authenticating with the authorization
server using its client credentials, and presenting the refresh token.
</t>
<t>
The authorization server validates the client credentials and the refresh token,
and if valid issues a new access token (and optionally, a new refresh token).
</t>
</list>
</t>
</section>
<section title='Document Structure'>
<t>
This specification is organized into the following sections:
</t>
<t>
<list style='symbols'>
<t>
Section 2 - describes the two endpoints used to obtain and utilize the various
authorization grant types.
</t>
<t>
Section 3 - describes client identification and authentication in general, and
provides one such method for client authentication using password credentials.
</t>
<t>
Section 4 - describes the complete flow for each authorization grant type, including
requesting authorization, authorization response, and requesting an access token.
</t>
<t>
Section 5 - describes the common access token response used for all non-implicit
authorization grant types.
</t>
<t>
Section 6 - describes the use of a refresh token to obtain additional access tokens
using the same resource owner authorization.
</t>
<t>
Section 7 - describes how access tokens are used to access protected resources.
</t>
<t>
Section 8 - describes how to extend certain elements of the protocol.
</t>
<t>
Section 9 - provides a security analysis of the protocol.
</t>
</list>
</t>
</section>
<section title='Notational Conventions'>
<t>
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL NOT', 'SHOULD', 'SHOULD
NOT', 'RECOMMENDED', 'MAY', and 'OPTIONAL' in this specification are to be interpreted as
described in <xref target='RFC2119' />.
</t>
<t>
This specification uses the Augmented Backus-Naur Form (ABNF) notation of
<xref target='RFC5234' />.
</t>
<t>
Unless otherwise noted, all the protocol parameter names and values are case sensitive.
</t>
</section>
</section>
<section title='Protocol Endpoints'>
<t>
The authorization process utilizes two endpoints (HTTP resources):
</t>
<t>
<list style='symbols'>
<t>
Authorization endpoint - used to obtain authorization from the resource owner via
user-agent redirection.
</t>
<t>
Token endpoint - used to exchange an authorization grant for an access token, typically
with client authentication.
</t>
</list>
</t>
<t>
Not every authorization grant type utilizes both endpoints. Extension grant types MAY
define additional endpoints as needed.
</t>
<section title='Authorization Endpoint'>
<t>
The authorization endpoint is used to interact with the resource owner and obtain
authorization which is expressed explicitly as an authorization code (exchanged for an
access token), or implicitly by direct issuance of an access token.
</t>
<t>
The authorization server MUST first verify the identity of the resource owner. The way in
which the authorization server authenticates the resource owner (e.g. username and
password login, session cookies) is beyond the scope of this specification.
</t>
<t>
The means through which the client obtains the location of the authorization endpoint are
beyond the scope of this specification but is typically provided in the service
documentation. The endpoint URI MAY include a query component as defined by
<xref target='RFC3986' /> section 3, which MUST be retained when adding additional query
parameters.
</t>
<t>
Since requests to the authorization endpoint result in user authentication and the
transmission of clear-text credentials (in the HTTP response), the authorization server
MUST require the use of a transport-layer security mechanism when sending requests to the
token endpoints. The authorization server MUST support TLS 1.2 as defined in
<xref target='RFC5246' />, and MAY support additional transport-layer mechanisms meeting
its security requirements.
</t>
<t>
The authorization server MUST support the use of the HTTP <spanx style='verb'>GET</spanx>
method <xref target='RFC2616' /> for the authorization endpoint, and MAY support the use
of the <spanx style='verb'>POST</spanx> method as well.
</t>
<t>
The REQUIRED <spanx style='verb'>response_type</spanx> request parameter is used to
identify which grant type the client is requesting: authorization code or implicit,
described in <xref target='code-authz-req' /> and <xref target='implicit-authz-req' />
respectively. If the request is missing the <spanx style='verb'>response_type</spanx>
parameter, the authorization server SHOULD return an error response as described in
<xref target='code-authz-error' />.
</t>
<t>
Parameters sent without a value MUST be treated as if they were omitted from the
request. The authorization server SHOULD ignore unrecognized request parameters.
</t>
<t>
Request and response parameters MUST NOT repeat more than once, unless noted otherwise.
</t>
<section title='Redirection URI' anchor='redirect-uri'>
<t>
The client directs the resource owner's user-agent to the authorization endpoint and
includes a redirection URI to which the authorization server will redirect the
user-agent back once authorization has been obtained (or denied). The client MAY omit
the redirection URI if one has been established between the client and authorization
server via other means, such as during the client registration process.
</t>
<t>
The redirection URI MUST be an absolute URI and MAY include a query component, which
MUST be retained by the authorization server when adding additional query parameters.
</t>
<t>
The authorization server SHOULD require the client to pre-register their redirection
URI or at least certain components such as the scheme, host, port and path. If a
redirection URI was registered, the authorization server MUST compare any redirection
URI received at the authorization endpoint with the registered URI.
</t>
<t>
The authorization server SHOULD NOT redirect the user-agent to unregistered or
untrusted URIs to prevent the endpoint from being used as an open redirector. If no
valid redirection URI is available, the authorization server SHOULD inform the
resource owner directly of the error.
</t>
</section>
</section>
<section title='Token Endpoint'>
<t>
The token endpoint is used by the client to obtain an access token by authenticating with
the authorization server and presenting its authorization grant or refresh token. The
token endpoint is used with every authorization grant except for the implicit grant type
(since an access token is issued directly).
</t>
<t>
The means through which the client obtains the location of the token endpoint are
beyond the scope of this specification but is typically provided in the service
documentation. The endpoint URI MAY include a query component, which MUST be retained
when adding additional query parameters.
</t>
<t>
Since requests to the token endpoint result in the transmission of clear-text credentials
(in the HTTP request and response), the authorization server MUST require the use of a
transport-layer security mechanism when sending requests to the token endpoints. The
authorization server MUST support TLS 1.2 as defined in <xref target='RFC5246' />, and
MAY support additional transport-layer mechanisms meeting its security requirements.
</t>
<t>
The token endpoint requires client authentication as described in
<xref target='client-authentication' />. The authorization server MAY accept any form of
client authentication meeting its security requirements. The client MUST NOT use more
than one authentication method in each request.
</t>
<t>
The client MUST use the HTTP <spanx style='verb'>POST</spanx> method when making access
token requests.
</t>
<t>
Parameters sent without a value MUST be treated as if they were omitted from the
request. The authorization server SHOULD ignore unrecognized request parameters.
</t>
<t>
Request and response parameters MUST NOT repeat more than once, unless noted otherwise.
</t>
</section>
</section>
<section title='Client Authentication' anchor='client-authentication'>
<t>
Client credentials are used to identify and authenticate the client. The client
credentials include a client identifier - a unique string issued to the client to
identify itself to the authorization server. The client identifier is not a secret, it is
exposed to the resource owner, and MUST NOT be used alone for client authentication. Client
authentication is accomplished via additional means such as a matching client password.
</t>
<t>
The methods through which the client obtains its client credentials are beyond the scope of
this specification. However, the client registration process typically includes gathering
relevant information used to inform the resource owner about the client when requesting
authorization.
</t>
<t>
Due to the nature of some clients, the authorization server should not make assumptions
about the confidentiality of client credentials without establishing trust with the
client. The authorization server SHOULD NOT issue client credentials to clients incapable
of keeping their credentials confidential (typically determined during the client
registration process).
</t>
<t>
In addition, the authorization server MAY allow unauthenticated access token requests
when the client identity does not matter (e.g. anonymous client) or when the client
identity is established via other means. For readability purposes only, this specification
is written under the assumption that the authorization server requires some form of client
authentication. However, such language does not affect the authorization server's discretion
in allowing unauthenticated client requests.
</t>
<section title='Client Password Authentication'>
<t>
The client password authentication uses a shared symmetric secret to authenticate the
client. The client identifier and password are included in the request using the
following parameters:
</t>
<t>
<list style='hanging' hangIndent='6'>
<t hangText='client_id'>
<vspace />
REQUIRED. The client identifier.
</t>
<t hangText='client_secret'>
<vspace />
REQUIRED. The client password.
</t>
</list>
</t>
<figure>
<preamble>
For example (line breaks are for display purposes only):
</preamble>
<artwork>
<![CDATA[
POST /token HTTP/1.1
Host: server.example.com
Content-Type: application/x-www-form-urlencoded
grant_type=authorization_code&client_id=s6BhdRkqt3&
client_secret=gX1fBat3bV&code=i1WsRn1uB1&
redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb
]]>
</artwork>
</figure>
</section>
<section title='Other Client Authentication Methods'>
<t>
In cases where client password authentication is not suitable or sufficient, the
authorization server MAY support other existing HTTP authentication schemes or define
new methods.
</t>
<figure>
<preamble>
For example, the authorization server MAY support using the HTTP Basic
authentication scheme as defined in <xref target='RFC2617' /> to include the client
identifier as the username and client password as the password (line breaks are for
display purposes only):
</preamble>
<artwork>
<![CDATA[
POST /token HTTP/1.1
Host: server.example.com
Authorization: Basic czZCaGRSa3F0MzpnWDFmQmF0M2JW
Content-Type: application/x-www-form-urlencoded
grant_type=authorization_code&code=i1WsRn1uB1&
redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb
]]>
</artwork>
</figure>
<t>
When using a method other than client password authentication to exchange an
authorization code grant type, the authorization server MUST define a method for
mapping the client credentials to the client identifier used to obtain the
authorization code.
</t>
</section>
</section>
<section title='Obtaining Authorization'>
<t>
To request an access token, the client obtains authorization from the resource owner. The
authorization is expressed in the form of an authorization grant which the client uses to
request the access token. OAuth defines four grant types: authorization code, implicit,
resource owner password credentials, and client credentials. It also provides an extension
mechanism for defining additional grant types.
</t>
<section title='Authorization Code'>
<t>
The authorization code grant type is suitable for clients capable of maintaining their
client credentials confidential (for authenticating with the authorization server) such
as a client implemented on a secure server. As a redirection-based flow, the client
must be capable of interacting with the resource owner's user-agent (typically a web
browser) and capable of receiving incoming requests (via redirection) from the
authorization server.
</t>
<figure title='Authorization Code Flow' anchor='Figure-3'>
<artwork>
<![CDATA[
+----------+
| resource |
| owner |
| |
+----------+
^
|
(B)
+----|-----+ Client Identifier +---------------+
| -+----(A)--- & Redirect URI ------>| |
| User- | | Authorization |
| Agent -+----(B)-- User authenticates --->| Server |
| | | |
| -+----(C)-- Authorization Code ---<| |
+-|----|---+ +---------------+
| | ^ v
(A) (C) | |
| | | |
^ v | |
+---------+ | |
| |>---(D)-- Client Credentials, --------' |
| | Authorization Code, |
| Client | & Redirect URI |
| | |
| |<---(E)----- Access Token -------------------'
+---------+ (w/ Optional Refresh Token)
]]>
</artwork>
</figure>
<t>
The flow illustrated in <xref target='Figure-3' /> includes the following steps:
</t>
<t>
<list style='format (%C)'>
<t>
The client initiates the flow by directing the resource owner's user-agent to the
authorization endpoint. The client includes its client identifier, requested
scope, local state, and a redirection URI to which the authorization server will send
the user-agent back once access is granted (or denied).
</t>
<t>
The authorization server authenticates the resource owner (via the user-agent) and
establishes whether the resource owner grants or denies the client's access request.
</t>
<t>
Assuming the resource owner grants access, the authorization server redirects the
user-agent back to the client using the redirection URI provided earlier. The
redirection URI includes an authorization code and any local state provided by the
client earlier.
</t>
<t>
The client requests an access token from the authorization server's token endpoint
by authenticating using its client credentials, and includes the authorization code
received in the previous step. The client includes the redirection URI used to obtain
the authorization code for verification.
</t>
<t>
The authorization server validates the client credentials, the authorization code,
and ensures the redirection URI received matches the URI used to redirect the client
in step (C). If valid, responds back with an access token.
</t>
</list>
</t>
<section title='Authorization Request' anchor='code-authz-req'>
<t>
The client constructs the request URI by adding the following parameters to the
query component of the authorization endpoint URI using the
<spanx style='verb'>application/x-www-form-urlencoded</spanx> format as defined by
<xref target='W3C.REC-html401-19991224' />:
</t>
<t>
<list style='hanging' hangIndent='6'>
<t hangText='response_type'>
<vspace />
REQUIRED. Value MUST be set to <spanx style='verb'>code</spanx>.
</t>
<t hangText='client_id'>
<vspace />
REQUIRED. The client identifier as described in
<xref target='client-authentication' />.
</t>
<t hangText='redirect_uri'>
<vspace />
REQUIRED, unless a redirection URI has been established between the client and
authorization server via other means. Described in <xref target='redirect-uri' />.
</t>
<t hangText='scope'>
<vspace />
OPTIONAL. The scope of the access request expressed as a list of space-delimited,
case sensitive strings. The value is defined by the authorization server. If the
value contains multiple space-delimited strings, their order does not matter, and
each string adds an additional access range to the requested scope.
</t>
<t hangText='state'>
<vspace />
OPTIONAL. An opaque value used by the client to maintain state between the request
and callback. The authorization server includes this value when redirecting the
user-agent back to the client.
</t>
</list>
</t>
<t>
The client directs the resource owner to the constructed URI using an HTTP redirection
response, or by other means available to it via the user-agent.
</t>
<figure>
<preamble>
For example, the client directs the user-agent to make the following HTTP request
using transport-layer security (line breaks are for display purposes only):
</preamble>
<artwork>
<![CDATA[
GET /authorize?response_type=code&client_id=s6BhdRkqt3&
redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb HTTP/1.1
Host: server.example.com
]]>
</artwork>
</figure>
<t>
The authorization server validates the request to ensure all required parameters are
present and valid. If the request is valid, the authorization server authenticates the
resource owner and obtains an authorization decision (by asking the resource owner or
by establishing approval via other means).
</t>
<t>
When a decision is established, the authorization server directs the user-agent to the
provided client redirection URI using an HTTP redirection response, or by other means
available to it via the user-agent.
</t>
</section>
<section title='Authorization Response'>
<t>
If the resource owner grants the access request, the authorization server issues an
authorization code and delivers it to the client by adding the following parameters to
the query component of the redirection URI using the
<spanx style='verb'>application/x-www-form-urlencoded</spanx> format:
</t>
<t>
<list style='hanging' hangIndent='6'>
<t hangText='code'>
<vspace />
REQUIRED. The authorization code generated by the authorization server. The
authorization code SHOULD expire shortly after it is issued to minimize the risk of
leaks. The client MUST NOT reuse the authorization code. If an authorization code
is used more than once, the authorization server MAY revoke all tokens previously
issued based on that authorization code. The authorization code is bound to the
client identifier and redirection URI.
</t>
<t hangText='state'>
<vspace />
REQUIRED if the <spanx style='verb'>state</spanx> parameter was present in the
client authorization request. Set to the exact value received from the client.
</t>
</list>
</t>
<figure>
<preamble>
For example, the authorization server redirects the user-agent by sending the
following HTTP response:
</preamble>
<artwork>
<![CDATA[
HTTP/1.1 302 Found
Location: https://client.example.com/cb?code=i1WsRn1uB1
]]>
</artwork>
</figure>
<t>
The client SHOULD ignore unrecognized response parameters. The authorization code
string size is left undefined by this specification. The client should avoid making
assumptions about code value sizes. The authorization server should document the size
of any value it issues.
</t>
<section title='Error Response' anchor='code-authz-error'>
<t>
If the request fails due to a missing, invalid, or mismatching redirection URI, or if
the client identifier provided is invalid, the authorization server SHOULD inform the
resource owner of the error, and MUST NOT redirect the user-agent to the invalid
redirection URI.
</t>
<t>
If the resource owner denies the access request or if the request fails for reasons
other than a missing or invalid redirection URI, the authorization server informs the
client by adding the following parameters to the query component of the redirection
URI using the <spanx style='verb'>application/x-www-form-urlencoded</spanx> format:
</t>
<t>
<list style='hanging' hangIndent='6'>
<t hangText='error'>
<vspace />
REQUIRED. A single error code from the following:
<list style='hanging' hangIndent='6'>
<t hangText='invalid_request'>
<vspace />
The request is missing a required parameter, includes an unsupported
parameter or parameter value, or is otherwise malformed.
</t>
<t hangText='unauthorized_client'>
<vspace />
The client is not authorized to request an authorization code using this
method.
</t>
<t hangText='access_denied'>
<vspace />
The resource owner or authorization server denied the request.
</t>
<t hangText='unsupported_response_type'>
<vspace />
The authorization server does not support obtaining an authorization code
using this method.
</t>
<t hangText='invalid_scope'>
<vspace />
The requested scope is invalid, unknown, or malformed.
</t>
<t hangText='a 4xx or 5xx HTTP status code (except for 400 and 401)'>
<vspace />
[[ Pending Consensus ]]
The authorization server MAY set the <spanx style='verb'>error</spanx>
parameter value to a numerical HTTP status code from the 4xx or 5xx range, with
the exception of the 400 (Bad Request) and 401 (Unauthorized) status codes.
For example, if the service is temporarily unavailable, the authorization
server MAY return an error response with <spanx style='verb'>error</spanx>
set to <spanx style='verb'>503</spanx>.
</t>
</list>
</t>
<t hangText='error_description'>
<vspace />
OPTIONAL. A human-readable text providing additional information, used to assist
in the understanding and resolution of the error occurred.
</t>
<t hangText='error_uri'>
<vspace />
OPTIONAL. A URI identifying a human-readable web page with information about the
error, used to provide the resource owner with additional information about the
error.
</t>
<t hangText='state'>
<vspace />
REQUIRED if a valid <spanx style='verb'>state</spanx> parameter was present in the
client authorization request. Set to the exact value received from the client.
</t>
</list>
</t>
<figure>
<preamble>
For example, the authorization server redirects the user-agent by sending the
following HTTP response:
</preamble>
<artwork>
<![CDATA[
HTTP/1.1 302 Found
Location: https://client.example.com/cb?error=access_denied
]]>
</artwork>
</figure>
</section>
</section>
<section title='Access Token Request'>
<t>
The client makes a request to the token endpoint by adding the following parameter
using the <spanx style='verb'>application/x-www-form-urlencoded</spanx> format in the
HTTP request entity-body:
</t>
<t>
<list style='hanging' hangIndent='6'>
<t hangText='grant_type'>
<vspace />
REQUIRED. Value MUST be set to <spanx style='verb'>authorization_code</spanx>.
</t>
<t hangText='code'>
<vspace />
REQUIRED. The authorization code received from the authorization server.
</t>
<t hangText='redirect_uri'>
<vspace />
REQUIRED. The redirection URI used by the authorization server to return the
authorization response in the previous step.
</t>
</list>
</t>
<t>
The client includes its authentication credentials as described in
<xref target='client-authentication' />
</t>
<figure>
<preamble>
For example, the client makes the following HTTP request by including its client
credentials via the <spanx style='verb'>client_id</spanx> and
<spanx style='verb'>client_secret</spanx> parameters, and using transport-layer
security (line breaks are for display purposes only):
</preamble>
<artwork>
<![CDATA[
POST /token HTTP/1.1
Host: server.example.com
Content-Type: application/x-www-form-urlencoded
grant_type=authorization_code&client_id=s6BhdRkqt3&
client_secret=gX1fBat3bV&code=i1WsRn1uB1&
redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb
]]>
</artwork>
</figure>
<t>
The authorization server MUST:
</t>
<t>
<list style='symbols'>
<t>
Validate the client credentials and ensure that the authorization code was issued
to that client.
</t>
<t>
Verify that the authorization code is valid, and that the redirection URI matches
the redirection URI used by the authorization server to deliver the authorization
code.
</t>
</list>
</t>
</section>
<section title='Access Token Response'>
<t>
If the access token request is valid and authorized, the authorization server issues an
access token and optional refresh token as described in <xref target='token-response' />.
If the request client authentication failed or is invalid, the authorization server returns
an error response as described in <xref target='token-errors' />.
</t>
<figure>
<preamble>
An example successful response:
</preamble>
<artwork>
<![CDATA[
HTTP/1.1 200 OK
Content-Type: application/json
Cache-Control: no-store
{
"access_token":"SlAV32hkKG",
"token_type":"example",
"expires_in":3600,
"refresh_token":"8xLOxBtZp8",
"example_parameter":"example_value"
}
]]>
</artwork>
</figure>
</section>
</section>
<section title='Implicit Grant'>
<t>
The implicit grant type is suitable for clients incapable of maintaining their
client credentials confidential (for authenticating with the authorization server) such
as client applications residing in a user-agent, typically implemented in a browser using
a scripting language such as JavaScript.
</t>
<t>
As a redirection-based flow, the client must be capable of interacting with the
resource owner's user-agent (typically a web browser) and capable of receiving incoming
requests (via redirection) from the authorization server.
</t>
<t>
Unlike the authorization code grant type in which the client makes separate requests for
authorization and access token, the client receives the access token as the result of the
authorization request.
</t>
<t>
Using the implicit grant type does not include client authentication since the client is
unable to maintain their credential confidentiality (the client resides on the resource
owner's computer or device which makes the client credentials accessible and
exploitable). Because the access token is encoded into the redirection URI, it may be
exposed to the resource owner and other applications residing on its computer or device.
</t>
<figure title='Implicit Grant Flow' anchor='Figure-4'>
<artwork>
<![CDATA[
+----------+
| Resource |
| Owner |
| |
+----------+
^
|
(B)
+----|-----+ Client Identifier +---------------+
| -+----(A)--- & Redirect URI ----->| |
| User- | | Authorization |
| Agent -|----(B)-- User authenticates -->| Server |
| | | |
| |<---(C)---- Redirect URI ------<| |
| | with Access Token +---------------+
| | in Fragment
| | +---------------+
| |----(D)---- Redirect URI ------>| Web Server |
| | without Fragment | with Client |
| | | Resource |
| (F) |<---(E)------- Script ---------<| |
| | +---------------+
+-|--------+
| |
(A) (G) Access Token
| |
^ v
+---------+
| |
| Client |
| |
+---------+
]]>
</artwork>
</figure>
<t>
The flow illustrated in <xref target='Figure-4' /> includes the following steps:
</t>
<t>
<list style='format (%C)'>
<t>
The client initiates the flow by directing the resource owner's user-agent to the
authorization endpoint. The client includes its client identifier, requested
scope, local state, and a redirection URI to which the authorization server will send
the user-agent back once access is granted (or denied).
</t>
<t>
The authorization server authenticates the resource owner (via the user-agent) and
establishes whether the resource owner grants or denies the client's access request.
</t>
<t>
Assuming the resource owner grants access, the authorization server redirects the
user-agent back to the client using the redirection URI provided earlier. The
redirection URI includes the access token in the URI fragment.
</t>
<t>
The user-agent follows the redirection instructions by making a request to the web
server (does not include the fragment). The user-agent retains the fragment
information locally.
</t>
<t>
The web server returns a web page (typically an HTML document with an embedded
script) capable of accessing the full redirection URI including the fragment retained
by the user-agent, and extracting the access token (and other parameters) contained
in the fragment.
</t>
<t>
The user-agent executes the script provided by the web server locally, which
extracts the access token and passes it to the client.
</t>
</list>
</t>
<section title='Authorization Request' anchor='implicit-authz-req'>
<t>
The client constructs the request URI by adding the following parameters to the
query component of the authorization endpoint URI using the
<spanx style='verb'>application/x-www-form-urlencoded</spanx> format:
</t>
<t>
<list style='hanging' hangIndent='6'>
<t hangText='response_type'>
<vspace />
REQUIRED. Value MUST be set to <spanx style='verb'>token</spanx>.
</t>
<t hangText='client_id'>
<vspace />
REQUIRED. The client identifier as described in
<xref target='client-authentication' />.
</t>
<t hangText='redirect_uri'>
<vspace />
REQUIRED, unless a redirection URI has been established between the client and
authorization server via other means. Described in <xref target='redirect-uri' />.
</t>
<t hangText='scope'>
<vspace />
OPTIONAL. The scope of the access request expressed as a list of space-delimited,
case sensitive strings. The value is defined by the authorization server. If the
value contains multiple space-delimited strings, their order does not matter, and
each string adds an additional access range to the requested scope.
</t>
<t hangText='state'>
<vspace />
OPTIONAL. An opaque value used by the client to maintain state between the request
and callback. The authorization server includes this value when redirecting the
user-agent back to the client.
</t>
</list>
</t>
<t>
The client directs the resource owner to the constructed URI using an HTTP redirection
response, or by other means available to it via the user-agent.
</t>
<figure>
<preamble>
For example, the client directs the user-agent to make the following HTTP request
using transport-layer security (line breaks are for display purposes only):
</preamble>
<artwork>
<![CDATA[
GET /authorize?response_type=token&client_id=s6BhdRkqt3&
redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb HTTP/1.1
Host: server.example.com
]]>
</artwork>
</figure>
<t>
The authorization server validates the request to ensure all required parameters are
present and valid. If the request is valid, the authorization server authenticates the
resource owner and obtains an authorization decision (by asking the resource owner or
by establishing approval via other means).
</t>
<t>
When a decision is established, the authorization server directs the user-agent to the
provided client redirection URI using an HTTP redirection response, or by other means
available to it via the user-agent.
</t>
</section>
<section title='Access Token Response'>
<t>
If the resource owner grants the access request, the authorization server issues an
access token and delivers it to the client by adding the following parameters to
the fragment component of the redirection URI using the
<spanx style='verb'>application/x-www-form-urlencoded</spanx> format:
</t>
<t>
<list style='hanging' hangIndent='6'>
<t hangText='access_token'>
<vspace />
REQUIRED. The access token issued by the authorization server.
</t>
<t hangText='token_type'>
<vspace />
REQUIRED. The type of the token issued as described in
<xref target='token-types' />. Value is case insensitive.
</t>
<t hangText='expires_in'>
<vspace />
OPTIONAL. The duration in seconds of the access token lifetime. For example, the
value <spanx style='verb'>3600</spanx> denotes that the access token will expire in
one hour from the time the response was generated.
</t>
<t hangText='scope'>
<vspace />
OPTIONAL. The scope of the access request expressed as a list of space-delimited,
case sensitive strings. The value is defined by the authorization server. If the
value contains multiple space-delimited strings, their order does not matter, and
each string adds an additional access range to the requested scope. The
authorization server SHOULD include the parameter if the requested scope is
different from the one requested by the client.
</t>
<t hangText='state'>
<vspace />
REQUIRED if the <spanx style='verb'>state</spanx> parameter was present in the
client authorization request. Set to the exact value received from the client.
</t>
</list>
</t>
<figure>
<preamble>
For example, the authorization server redirects the user-agent by sending the
following HTTP response (URI line breaks are for display purposes only):
</preamble>
<artwork>
<![CDATA[
HTTP/1.1 302 Found
Location: http://example.com/rd#access_token=FJQbwq9&
token_type=example&expires_in=3600
]]>
</artwork>
</figure>
<t>
The client SHOULD ignore unrecognized response parameters. The access token string size
is left undefined by this specification. The client should avoid making assumptions
about value sizes. The authorization server should document the size of any value it
issues.
</t>
<section title='Error Response' anchor='implicit-authz-error'>
<t>
If the request fails due to a missing, invalid, or mismatching redirection URI, or if
the client identifier provided is invalid, the authorization server SHOULD inform the
resource owner of the error, and MUST NOT redirect the user-agent to the invalid
redirection URI.
</t>
<t>
If the resource owner denies the access request or if the request fails for reasons
other than a missing or invalid redirection URI, the authorization server informs the
client by adding the following parameters to the fragment component of the
redirection URI using the
<spanx style='verb'>application/x-www-form-urlencoded</spanx> format:
</t>
<t>
<list style='hanging' hangIndent='6'>
<t hangText='error'>
<vspace />
REQUIRED. A single error code from the following:
<list style='hanging' hangIndent='6'>
<t hangText='invalid_request'>
<vspace />
The request is missing a required parameter, includes an unsupported
parameter or parameter value, or is otherwise malformed.
</t>
<t hangText='unauthorized_client'>
<vspace />
The client is not authorized to request an access token using this method.
</t>
<t hangText='access_denied'>
<vspace />
The resource owner or authorization server denied the request.
</t>
<t hangText='unsupported_response_type'>
<vspace />
The authorization server does not support obtaining an access token using
this method.
</t>
<t hangText='invalid_scope'>
<vspace />
The requested scope is invalid, unknown, or malformed.
</t>
<t hangText='a 4xx or 5xx HTTP status code (except for 400 and 401)'>
<vspace />
[[ Pending Consensus ]]
The authorization server MAY set the <spanx style='verb'>error</spanx>
parameter value to a numerical HTTP status code from the 4xx or 5xx range, with
the exception of the 400 (Bad Request) and 401 (Unauthorized) status codes.
For example, if the service is temporarily unavailable, the authorization
server MAY return an error response with <spanx style='verb'>error</spanx>
set to <spanx style='verb'>503</spanx>.
</t>
</list>
</t>
<t hangText='error_description'>
<vspace />
OPTIONAL. A human-readable text providing additional information, used to assist
in the understanding and resolution of the error occurred.
</t>
<t hangText='error_uri'>
<vspace />
OPTIONAL. A URI identifying a human-readable web page with information about the
error, used to provide the resource owner with additional information about the
error.
</t>
<t hangText='state'>
<vspace />
REQUIRED if a valid <spanx style='verb'>state</spanx> parameter was present in the
client authorization request. Set to the exact value received from the client.
</t>
</list>
</t>
<figure>
<preamble>
For example, the authorization server redirects the user-agent by sending the
following HTTP response:
</preamble>
<artwork>
<![CDATA[
HTTP/1.1 302 Found
Location: https://client.example.com/cb#error=access_denied
]]>
</artwork>
</figure>
</section>
</section>
</section>
<section title="Resource Owner Password Credentials">
<t>
The resource owner password credentials grant type is suitable in cases where the
resource owner has a trust relationship with the client, such as its computer operating
system or a highly privileged application. The authorization server should take special
care when enabling the grant type, and only when other flows are not viable.
</t>
<t>
The grant type is suitable for clients capable of obtaining the resource owner credentials
(username and password, typically using an interactive form). It is also used to migrate
existing clients using direct authentication schemes such as HTTP Basic or Digest
authentication to OAuth by converting the stored credentials with an access token.
</t>
<figure title="Resource Owner Password Credentials Flow" anchor='Figure-5'>
<artwork>
<![CDATA[
+----------+
| Resource |
| Owner |
| |
+----------+
v
|
(A) Password Credentials
|
v
+---------+ +---------------+
| | Client Credentials | |
| |>--(B)---- & Resource Owner ----->| |
| Client | Password Credentials | Authorization |
| | | Server |
| |<--(C)---- Access Token ---------<| |
| | (w/ Optional Refresh Token) | |
+---------+ +---------------+
]]>
</artwork>
</figure>
<t>
The flow illustrated in <xref target='Figure-5' /> includes the following steps:
</t>
<t>
<list style='format (%C)'>
<t>
The resource owner provides the client with its username and password.
</t>
<t>
The client requests an access token from the authorization server's token endpoint by
authenticating using its client credentials, and includes the credentials received
from the resource owner.
</t>
<t>
The authorization server validates the resource owner credentials and the client
credentials and issues an access token.
</t>
</list>
</t>
<section title='Authorization Request and Response'>
<t>
The method through which the client obtains the resource owner credentials is beyond
the scope of this specification. The client MUST discard the credentials once an access
token has been obtained.
</t>
</section>
<section title='Access Token Request'>
<t>
The client makes a request to the token endpoint by adding the following parameter
using the <spanx style='verb'>application/x-www-form-urlencoded</spanx> format in the
HTTP request entity-body:
</t>
<t>
<list style='hanging' hangIndent='6'>
<t hangText='grant_type'>
<vspace />
REQUIRED. Value MUST be set to <spanx style='verb'>password</spanx>.
</t>
<t hangText='username'>
<vspace />
REQUIRED. The resource owner username.
</t>
<t hangText='password'>
<vspace />
REQUIRED. The resource owner password.
</t>
<t hangText='scope'>
<vspace />
OPTIONAL. The scope of the access request expressed as a list of space-delimited,
case sensitive strings. The value is defined by the authorization server. If the
value contains multiple space-delimited strings, their order does not matter, and
each string adds an additional access range to the requested scope.
</t>
</list>
</t>
<t>
The client includes its authentication credentials as described in
<xref target='client-authentication' />
</t>
<figure>
<preamble>
For example, the client makes the following HTTP request by including its client
credentials via the <spanx style='verb'>client_id</spanx> and
<spanx style='verb'>client_secret</spanx> parameters, and using transport-layer
security (line breaks are for display purposes only):
</preamble>
<artwork>
<![CDATA[
POST /token HTTP/1.1
Host: server.example.com
Content-Type: application/x-www-form-urlencoded
grant_type=password&client_id=s6BhdRkqt3&
client_secret=47HDu8s&username=johndoe&password=A3ddj3w
]]>
</artwork>
</figure>
<t>
The authorization server MUST:
</t>
<t>
<list style='symbols'>
<t>
Validate the client credentials.
</t>
<t>
Validate the resource owner password credentials.
</t>
</list>
</t>
</section>
<section title='Access Token Response'>
<t>
If the access token request is valid and authorized, the authorization server issues an
access token and optional refresh token as described in <xref target='token-response' />.
If the request failed client authentication or is invalid, the authorization server returns
an error response as described in <xref target='token-errors' />.
</t>
<figure>
<preamble>
An example successful response:
</preamble>
<artwork>
<![CDATA[
HTTP/1.1 200 OK
Content-Type: application/json
Cache-Control: no-store
{
"access_token":"SlAV32hkKG",
"token_type":"example",
"expires_in":3600,
"refresh_token":"8xLOxBtZp8",
"example_parameter":"example_value"
}
]]>
</artwork>
</figure>
</section>
</section>
<section title="Client Credentials">
<t>
The client can request an access token using only its client credentials when the client
is requesting access to the protected resources under its control, or those of another
resource owner which has been previously arranged with the authorization server (the
method of which is beyond the scope of this specification).
</t>
<figure title="Client Credentials Flow" anchor='Figure-6'>
<artwork>
<![CDATA[
+---------+ +---------------+
| | | |
| |>--(A)--- Client Credentials ---->| Authorization |
| Client | | Server |
| |<--(B)---- Access Token ---------<| |
| | (w/ Optional Refresh Token) | |
+---------+ +---------------+
]]>
</artwork>
</figure>
<t>
The flow illustrated in <xref target='Figure-6' /> includes the following steps:
</t>
<t>
<list style='format (%C)'>
<t>
The client requests an access token from the token endpoint by authenticating using
its client credentials.
</t>
<t>
The authorization server validates the client credentials and issues an access token.
</t>
</list>
</t>
<section title='Authorization Request and Response'>
<t>
Since the client credentials are used as the authorization grant, no additional
authorization request is needed as the client is already in the possession of its
client credentials.
</t>
</section>
<section title='Access Token Request'>
<t>
The client makes a request to the token endpoint by adding the following parameter
using the <spanx style='verb'>application/x-www-form-urlencoded</spanx> format in the
HTTP request entity-body:
</t>
<t>
<list style='hanging' hangIndent='6'>
<t hangText='grant_type'>
<vspace />
REQUIRED. Value MUST be set to <spanx style='verb'>client_credentials</spanx>.
</t>
<t hangText='scope'>
<vspace />
OPTIONAL. The scope of the access request expressed as a list of space-delimited,
case sensitive strings. The value is defined by the authorization server. If the
value contains multiple space-delimited strings, their order does not matter, and
each string adds an additional access range to the requested scope.
</t>
</list>
</t>
<t>
The client includes its authentication credentials as described in
<xref target='client-authentication' />
</t>
<figure>
<preamble>
For example, the client makes the following HTTP request by including its client
credentials via the <spanx style='verb'>client_id</spanx> and
<spanx style='verb'>client_secret</spanx> parameters, and using transport-layer
security (line breaks are for display purposes only):
</preamble>
<artwork>
<![CDATA[
POST /token HTTP/1.1
Host: server.example.com
Content-Type: application/x-www-form-urlencoded
grant_type=client_credentials&client_id=s6BhdRkqt3&
client_secret=47HDu8s
]]>
</artwork>
</figure>
<t>
The authorization server MUST validate the client credentials.
</t>
</section>
<section title='Access Token Response'>
<t>
If the access token request is valid and authorized, the authorization server issues an
access token and optional refresh token as described in <xref target='token-response' />.
If the request failed client authentication or is invalid, the authorization server returns
an error response as described in <xref target='token-errors' />.
</t>
<figure>
<preamble>
An example successful response:
</preamble>
<artwork>
<![CDATA[
HTTP/1.1 200 OK
Content-Type: application/json
Cache-Control: no-store
{
"access_token":"SlAV32hkKG",
"token_type":"example",
"expires_in":3600,
"refresh_token":"8xLOxBtZp8",
"example_parameter":"example_value"
}
]]>
</artwork>
</figure>
</section>
</section>
<section title='Extensions'>
<t>
The client uses an extension grant type by specifying the grant type using an
absolute URI (defined by the authorization server) as the value of the
<spanx style='verb'>grant_type</spanx> parameter of the token endpoint, and by
adding any additional parameters necessary.
</t>
<figure>
<preamble>
For example, to request an access token using a SAML 2.0 assertion grant type as
defined by <xref target='I-D.ietf-oauth-saml2-bearer' />, the client makes the
following HTTP request using transport-layer security (line breaks are for display
purposes only):
</preamble>
<artwork>
<![CDATA[
POST /token HTTP/1.1
Host: server.example.com
Content-Type: application/x-www-form-urlencoded
grant_type=http%3A%2F%2Foauth.net%2Fgrant_type%2Fassertion%2F
saml%2F2.0%2Fbearer&assertion=PEFzc2VydGlvbiBJc3N1ZUluc3RhbnQ
[...omitted for brevity...]V0aG5TdGF0ZW1lbnQ-PC9Bc3NlcnRpb24-
]]>
</artwork>
</figure>
</section>
</section>
<section title='Issuing an Access Token' anchor='token-issue'>
<t>
If the access token request is valid and authorized, the authorization server issues an
access token and optional refresh token as described in <xref target='token-response' />.
If the request failed client authentication or is invalid, the authorization server returns
an error response as described in <xref target='token-errors' />.
</t>
<section title='Successful Response' anchor='token-response'>
<t>
The authorization server issues an access token and optional refresh token, and
constructs the response by adding the following parameters to the entity body of the HTTP
response with a 200 (OK) status code:
</t>
<t>
<list style='hanging' hangIndent='6'>
<t hangText='access_token'>
<vspace />
REQUIRED. The access token issued by the authorization server.
</t>
<t hangText='token_type'>
<vspace />
REQUIRED. The type of the token issued as described in <xref target='token-types' />.
Value is case insensitive.
</t>
<t hangText='expires_in'>
<vspace />
OPTIONAL. The duration in seconds of the access token lifetime. For example, the
value <spanx style='verb'>3600</spanx> denotes that the access token will expire in
one hour from the time the response was generated.
</t>
<t hangText='refresh_token'>
<vspace />
OPTIONAL. The refresh token which can be used to obtain new access tokens using the
same authorization grant as described in <xref target='token-refresh' />.
</t>
<t hangText='scope'>
<vspace />
OPTIONAL. The scope of the access request expressed as a list of space-delimited,
case sensitive strings. The value is defined by the authorization server. If the
value contains multiple space-delimited strings, their order does not matter, and
each string adds an additional access range to the requested scope. The authorization
server SHOULD include the parameter if the requested scope is different from the one
requested by the client.
</t>
</list>
</t>
<t>
The parameters are included in the entity body of the HTTP response using the
<spanx style='verb'>application/json</spanx> media type as defined by
<xref target='RFC4627' />. The parameters are serialized into a JSON structure by
adding each parameter at the highest structure level. Parameter names and string values
are included as JSON strings. Numerical values are included as JSON numbers.
</t>
<t>
The authorization server MUST include the HTTP
<spanx style='verb'>Cache-Control</spanx> response header field <xref target='RFC2616' />
with a value of <spanx style='verb'>no-store</spanx> in any response containing tokens,
secrets, or other sensitive information.
</t>
<figure>
<preamble>
For example:
</preamble>
<artwork>
<![CDATA[
HTTP/1.1 200 OK
Content-Type: application/json
Cache-Control: no-store
{
"access_token":"SlAV32hkKG",
"token_type":"example",
"expires_in":3600,
"refresh_token":"8xLOxBtZp8",
"example_parameter":"example_value"
}
]]>
</artwork>
</figure>
<t>
The client SHOULD ignore unrecognized response parameters. The sizes of tokens and other
values received from the authorization server are left undefined. The client should
avoid making assumptions about value sizes. The authorization server should document the
size of any value it issues.
</t>
</section>
<section title='Error Response' anchor='token-errors'>
<t>
The authorization server responds with an HTTP 400 (Bad Request) status code and includes
the following parameters with the response:
</t>
<t>
<list style='hanging' hangIndent='6'>
<t hangText='error'>
<vspace />
REQUIRED. A single error code from the following:
<list style='hanging' hangIndent='6'>
<t hangText='invalid_request'>
<vspace />
The request is missing a required parameter, includes an unsupported
parameter or parameter value, repeats a parameter, includes multiple
credentials, utilizes more than one mechanism for authenticating the client,
or is otherwise malformed.
</t>
<t hangText='invalid_client'>
<vspace />
Client authentication failed (e.g. unknown client, no client credentials
included, multiple client credentials included, or unsupported credentials
type). The authorization server MAY return an HTTP 401 (Unauthorized) status code
to indicate which HTTP authentication schemes are supported. If the client
attempted to authenticate via the <spanx style='verb'>Authorization</spanx>
request header field, the authorization server MUST respond with an HTTP 401
(Unauthorized) status code, and include the
<spanx style='verb'>WWW-Authenticate</spanx> response header field matching the
authentication scheme used by the client.
</t>
<t hangText='invalid_grant'>
<vspace />
The provided authorization grant is invalid, expired, revoked, does not match the
redirection URI used in the authorization request, or was issued to another client.
</t>
<t hangText='unauthorized_client'>
<vspace />
The authenticated client is not authorized to use this authorization grant type.
</t>
<t hangText='unsupported_grant_type'>
<vspace />
The authorization grant type is not supported by the authorization server.
</t>
<t hangText='invalid_scope'>
<vspace />
The requested scope is invalid, unknown, malformed, or exceeds the scope granted
by the resource owner.
</t>
</list>
</t>
<t hangText='error_description'>
<vspace />
OPTIONAL. A human-readable text providing additional information, used to assist
in the understanding and resolution of the error occurred.
</t>
<t hangText='error_uri'>
<vspace />
OPTIONAL. A URI identifying a human-readable web page with information about the
error, used to provide the resource owner with additional information about the
error.
</t>
</list>
</t>
<t>
The parameters are included in the entity body of the HTTP response using the
<spanx style='verb'>application/json</spanx> media type as defined by
<xref target='RFC4627' />. The parameters are serialized into a JSON structure by
adding each parameter at the highest structure level. Parameter names and string values
are included as JSON strings. Numerical values are included as JSON numbers.
</t>
<figure>
<preamble>
For example:
</preamble>
<artwork>
<![CDATA[
HTTP/1.1 400 Bad Request
Content-Type: application/json
Cache-Control: no-store
{
"error":"invalid_request"
}
]]>
</artwork>
</figure>
<t>
[[ Pending Consensus ]]
If the authorization server encounters an error condition other than the 400 (Bad
Request) and 401 (Unauthorized) responses described above (e.g. the service is
temporarily unavailable), the authorization server SHOULD include an error response in
the entity body, and set the <spanx style='verb'>error</spanx> parameter value to the
numerical HTTP status code returned.
</t>
<figure>
<preamble>
For example:
</preamble>
<artwork>
<![CDATA[
HTTP/1.1 503 Service Unavailable
Content-Type: application/json
{
"error":"503"
}
]]>
</artwork>
</figure>
</section>
</section>
<section title='Refreshing an Access Token' anchor='token-refresh'>
<t>
The client makes a request to the token endpoint by adding the following parameter
using the <spanx style='verb'>application/x-www-form-urlencoded</spanx> format in the
HTTP request entity-body:
</t>
<t>
<list style='hanging' hangIndent='6'>
<t hangText='grant_type'>
<vspace />
REQUIRED. Value MUST be set to <spanx style='verb'>refresh_token</spanx>.
</t>
<t hangText='refresh_token'>
<vspace />
REQUIRED. The refresh token issued to the client.
</t>
<t hangText='scope'>
<vspace />
OPTIONAL. The scope of the access request expressed as a list of space-delimited,
case sensitive strings. The value is defined by the authorization server. If the
value contains multiple space-delimited strings, their order does not matter, and
each string adds an additional access range to the requested scope. The requested
scope MUST be equal or lesser than the scope originally granted by the resource
owner, and if omitted is treated as equal to the scope originally granted by the
resource owner.
</t>
</list>
</t>
<t>
The client includes its authentication credentials as described in
<xref target='client-authentication' />.
</t>
<figure>
<preamble>
For example, the client makes the following HTTP request by including its client
credentials via the <spanx style='verb'>client_id</spanx> and
<spanx style='verb'>client_secret</spanx> parameters, and using transport-layer
security (line breaks are for display purposes only):
</preamble>
<artwork>
<![CDATA[
POST /token HTTP/1.1
Host: server.example.com
Content-Type: application/x-www-form-urlencoded
grant_type=refresh_token&client_id=s6BhdRkqt3&
client_secret=8eSEIpnqmM&refresh_token=n4E9O119d
]]>
</artwork>
</figure>
<t>
The authorization server MUST validate the client credentials, ensure that the refresh
token was issued to the authenticated client, validate the refresh token, and
verify that the resource owner's authorization is still valid. If valid and authorized, the
authorization server issues an access token as described in
<xref target='token-response' />. If the request failed verification or is invalid, the
authorization server returns an error response as described in
<xref target='token-errors' />.
</t>
<t>
The authorization server MAY issue a new refresh token, in which case, the client MUST
discard the old refresh token and replace it with the new refresh token.
</t>
</section>
<section title='Accessing Protected Resources' anchor='access-resource'>
<t>
The client accesses protected resources by presenting the access token to the resource
server. The resource server MUST validate the access token and ensure it has not expired
and that its scope covers the requested resource. The methods used by the resource server
to validate the access token (as well as any error responses) are beyond the scope of this
specification, but generally involve an interaction or coordination between the resource
server and the authorization server.
</t>
<t>
The method in which the client utilized the access token to authenticate with the resource
server depends on the type of access token issued by the authorization server. Typically,
it involves using the HTTP <spanx style='verb'>Authorization</spanx> request header field
<xref target='RFC2617' /> with an authentication scheme defined by the access token type
specification.
</t>
<section title='Access Token Types' anchor='token-types'>
<t>
The access token type provides the client with the information required to successfully
utilize the access token to make a protected resource request (along with type-specific
attributes).
</t>
<figure>
<preamble>
For example, the <spanx style='verb'>bearer</spanx> token type defined in
<xref target='I-D.ietf-oauth-v2-bearer' /> is utilized by simply including the access
token string in the request:
</preamble>
<artwork>
<![CDATA[
GET /resource/1 HTTP/1.1
Host: example.com
Authorization: Bearer h480djs93hd8
]]>
</artwork>
</figure>
<figure>
<preamble>
while the <spanx style='verb'>mac</spanx> token type defined in
<xref target='I-D.hammer-oauth-v2-mac-token' /> is utilized by issuing a token secret
together with the access token which is used to sign certain components of the HTTP
requests:
</preamble>
<artwork>
<![CDATA[
GET /resource/1 HTTP/1.1
Host: example.com
Authorization: MAC token="h480djs93hd8",
timestamp="137131200",
nonce="dj83hs9s",
signature="kDZvddkndxvhGRXZhvuDjEWhGeE="
]]>
</artwork>
</figure>
<t>
Each access token type definition specifies the additional attributes (if any) sent to
the client together with the <spanx style='verb'>access_token</spanx> response parameter.
It also defines the HTTP authentication method used to include the access token when
making a protected resource request.
</t>
</section>
</section>
<section title='Extensibility' anchor='extensions'>
<section title='Defining Access Token Types' anchor='new-types'>
<t>
Access token types can be defined in one of two ways: registered in the access token type
registry (following the procedures in <xref target='type-registry' />), or use a unique
absolute URI as its name.
</t>
<t>
Types utilizing a URI name SHOULD be limited to vendor-specific implementations that are
not commonly applicable, and are specific to the implementation details of the resource
server where they are used.
</t>
<t>
All other types MUST be registered. Type names MUST conform to the type-name ABNF. If the
type definition includes a new HTTP authentication scheme, the type name SHOULD be
identical to the HTTP authentication scheme name (as defined by <xref target='RFC2617' />).
</t>
<figure>
<artwork>
<![CDATA[
type-name = 1*name-char
name-char = "-" / "." / "_" / DIGIT / ALPHA
]]>
</artwork>
</figure>
</section>
<section title='Defining New Endpoint Parameters'>
<t>
New request or response parameters for use with the authorization endpoint or the token
endpoint are defined and registered in the parameters registry following the procedure in
<xref target='parameters-registry' />.
</t>
<t>
Parameter names MUST conform to the param-name ABNF and parameter values syntax MUST be
well-defined (e.g., using ABNF, or a reference to the syntax of an existing parameter).
</t>
<figure>
<artwork>
<![CDATA[
param-name = 1*name-char
name-char = "-" / "." / "_" / DIGIT / ALPHA
]]>
</artwork>
</figure>
<t>
Unregistered vendor-specific parameter extensions that are not commonly applicable, and
are specific to the implementation details of the authorization server where they are
used SHOULD utilize a vendor-specific prefix that is not likely to conflict with other
registered values (e.g. begin with 'companyname_').
</t>
</section>
<section title='Defining New Authorization Grant Types'>
<t>
New authorization grant types can be defined by assigning them a unique absolute URI for
use with the <spanx style='verb'>grant_type</spanx> parameter. If the extension grant
type requires additional token endpoint parameters, they MUST be registered in the OAuth
parameters registry as described by <xref target='parameters-registry' />.
</t>
</section>
<section title='Defining Additional Error Codes' anchor='new-errors'>
<t>
[[ Pending Consensus ]]
</t>
<t>
In cases where protocol extensions (i.e. access token types, extension parameters, or
extension grant types) require additional error codes to be used with the authorization
code grant error response (<xref target='code-authz-error' />), the implicit grant error
response (<xref target='implicit-authz-error' />), or the token error response
(<xref target='token-errors' />), such error codes MAY be defined.
</t>
<t>
Extension error codes MUST be registered (following the procedures in
<xref target='error-registry' />) if the extension they are used in conjunction with is
registered. Additional error codes used with unregistered extensions MAY be registered.
</t>
<t>
Error codes MUST conform to the error-code ABNF, and SHOULD be prefixed by an identifying
name when possible. For example, an error identifying an invalid value set to the
extension parameter <spanx style='verb'>example</spanx> should be named
<spanx style='verb'>example_invalid</spanx>.
</t>
<figure>
<artwork>
<![CDATA[
error-code = ALPHA *error-char
error-char = "-" / "." / "_" / DIGIT / ALPHA
]]>
</artwork>
</figure>
</section>
</section>
<section title='Security Considerations'>
<t>
[[ TBD ]]
</t>
</section>
<section title='IANA Considerations'>
<section title='The OAuth Access Token Type Registry' anchor='type-registry'>
<t>
This specification establishes the OAuth access token type registry.
</t>
<t>
Access token types are registered on the advice of one or more Designated Experts
(appointed by the IESG or their delegate), with a Specification Required (using
terminology from <xref target='RFC5226' />). However, to allow for the allocation of
values prior to publication, the Designated Expert(s) may approve registration once they
are satisfied that such a specification will be published.
</t>
<t>
Registration requests should be sent to the [TBD]@ietf.org mailing list for review and
comment, with an appropriate subject (e.g., "Request for access toke type: example").
[[ Note to RFC-EDITOR: The name of the mailing list should be determined in consultation
with the IESG and IANA. Suggested name: oauth-ext-review. ]]
</t>
<t>
Within at most 14 days of the request, the Designated Expert(s) will either approve or
deny the registration request, communicating this decision to the review list and IANA.
Denials should include an explanation and, if applicable, suggestions as to how to make
the request successful.
</t>
<t>
Decisions (or lack thereof) made by the Designated Expert can be first appealed to
Application Area Directors (contactable using app-ads@tools.ietf.org email address or
directly by looking up their email addresses on http://www.iesg.org/ website) and, if the
appellant is not satisfied with the response, to the full IESG (using the iesg@iesg.org
mailing list).
</t>
<t>
IANA should only accept registry updates from the Designated Expert(s), and should direct
all requests for registration to the review mailing list.
</t>
<section title='Registration Template'>
<t>
<list style='hanging'>
<t hangText='Type name:'>
<vspace />
The name requested (e.g., "example").
</t>
<t hangText='Additional Token Endpoint Response Parameters:'>
<vspace />
Additional response parameters returned together with the
<spanx style='verb'>access_token</spanx> parameter. New parameters MUST be
separately registered in the OAuth parameters registry as described by
<xref target='parameters-registry' />.
</t>
<t hangText='HTTP Authentication Scheme(s):'>
<vspace />
The HTTP authentication scheme name(s), if any, used to authenticate protected
resources requests using access token of this type.
</t>
<t hangText='Change controller:'>
<vspace />
For standards-track RFCs, state "IETF". For others, give the name of the
responsible party. Other details (e.g., postal address, e-mail address, home page
URI) may also be included.
</t>
<t hangText='Specification document(s):'>
<vspace />
Reference to document that specifies the parameter, preferably including a URI that
can be used to retrieve a copy of the document. An indication of the relevant
sections may also be included, but is not required.
</t>
</list>
</t>
</section>
</section>
<section title='The OAuth Parameters Registry' anchor='parameters-registry'>
<t>
This specification establishes the OAuth parameters registry.
</t>
<t>
Additional parameters for inclusion in the authorization endpoint request, the
authorization endpoint response, the token endpoint request, or the token endpoint
response, are registered on the advice of one or more Designated Experts (appointed by
the IESG or their delegate), with a Specification Required (using terminology from
<xref target='RFC5226' />). However, to allow for the allocation of values prior to
publication, the Designated Expert(s) may approve registration once they are satisfied
that such a specification will be published.
</t>
<t>
Registration requests should be sent to the [TBD]@ietf.org mailing list for review and
comment, with an appropriate subject (e.g., "Request for parameter: example").
[[ Note to RFC-EDITOR: The name of the mailing list should be determined in consultation
with the IESG and IANA. Suggested name: oauth-ext-review. ]]
</t>
<t>
Within at most 14 days of the request, the Designated Expert(s) will either approve or
deny the registration request, communicating this decision to the review list and IANA.
Denials should include an explanation and, if applicable, suggestions as to how to make
the request successful.
</t>
<t>
Decisions (or lack thereof) made by the Designated Expert can be first appealed to
Application Area Directors (contactable using app-ads@tools.ietf.org email address or
directly by looking up their email addresses on http://www.iesg.org/ website) and, if the
appellant is not satisfied with the response, to the full IESG (using the iesg@iesg.org
mailing list).
</t>
<t>
IANA should only accept registry updates from the Designated Expert(s), and should direct
all requests for registration to the review mailing list.
</t>
<section title='Registration Template'>
<t>
<list style='hanging'>
<t hangText='Parameter name:'>
<vspace />
The name requested (e.g., "example").
</t>
<t hangText='Parameter usage location:'>
<vspace />
The location(s) where parameter can be used. The possible locations are:
authorization request, authorization response, token request, or token response.
</t>
<t hangText='Change controller:'>
<vspace />
For standards-track RFCs, state "IETF". For others, give the name of the
responsible party. Other details (e.g., postal address, e-mail address, home page
URI) may also be included.
</t>
<t hangText='Specification document(s):'>
<vspace />
Reference to document that specifies the parameter, preferably including a URI that
can be used to retrieve a copy of the document. An indication of the relevant
sections may also be included, but is not required.
</t>
</list>
</t>
</section>
<section title='Initial Registry Contents'>
<t>
The OAuth Parameters Registry's initial contents are:
</t>
<t>
<list style='symbols'>
<t>
Parameter name: client_id
</t>
<t>
Parameter usage location: authorization request, token request
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
<t>
<list style='symbols'>
<t>
Parameter name: client_secret
</t>
<t>
Parameter usage location: token request
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
<t>
<list style='symbols'>
<t>
Parameter name: response_type
</t>
<t>
Parameter usage location: authorization request
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
<t>
<list style='symbols'>
<t>
Parameter name: redirect_uri
</t>
<t>
Parameter usage location: authorization request, token request
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
<t>
<list style='symbols'>
<t>
Parameter name: scope
</t>
<t>
Parameter usage location: authorization request, authorization response, token
request, token response
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
<t>
<list style='symbols'>
<t>
Parameter name: state
</t>
<t>
Parameter usage location: authorization request, authorization response
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
<t>
<list style='symbols'>
<t>
Parameter name: code
</t>
<t>
Parameter usage location: authorization response, token request
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
<t>
<list style='symbols'>
<t>
Parameter name: error_description
</t>
<t>
Parameter usage location: authorization response, token response
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
<t>
<list style='symbols'>
<t>
Parameter name: error_uri
</t>
<t>
Parameter usage location: authorization response, token response
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
<t>
<list style='symbols'>
<t>
Parameter name: grant_type
</t>
<t>
Parameter usage location: token request
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
<t>
<list style='symbols'>
<t>
Parameter name: access_token
</t>
<t>
Parameter usage location: authorization response, token response
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
<t>
<list style='symbols'>
<t>
Parameter name: token_type
</t>
<t>
Parameter usage location: authorization response, token response
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
<t>
<list style='symbols'>
<t>
Parameter name: expires_in
</t>
<t>
Parameter usage location: authorization response, token response
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
<t>
<list style='symbols'>
<t>
Parameter name: username
</t>
<t>
Parameter usage location: token request
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
<t>
<list style='symbols'>
<t>
Parameter name: password
</t>
<t>
Parameter usage location: token request
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
<t>
<list style='symbols'>
<t>
Parameter name: refresh_token
</t>
<t>
Parameter usage location: token request, token response
</t>
<t>
Change controller: IETF
</t>
<t>
Specification document(s): [[ this document ]]
</t>
</list>
</t>
</section>
</section>
<section title='The OAuth Extensions Error Registry' anchor='error-registry'>
<t>
[[ Pending Consensus ]]
</t>
<t>
This specification establishes the OAuth extensions error registry.
</t>
<t>
Additional error codes used together with other protocol extensions (i.e. extension grant
types, access token types, or extension parameters) are registered on the advice of one
or more Designated Experts (appointed by the IESG or their delegate), with a
Specification Required (using terminology from <xref target='RFC5226' />). However, to
allow for the allocation of values prior to publication, the Designated Expert(s) may
approve registration once they are satisfied that such a specification will be published.
</t>
<t>
Registration requests should be sent to the [TBD]@ietf.org mailing list for review and
comment, with an appropriate subject (e.g., "Request for error code: example").
[[ Note to RFC-EDITOR: The name of the mailing list should be determined in consultation
with the IESG and IANA. Suggested name: oauth-ext-review. ]]
</t>
<t>
Within at most 14 days of the request, the Designated Expert(s) will either approve or
deny the registration request, communicating this decision to the review list and IANA.
Denials should include an explanation and, if applicable, suggestions as to how to make
the request successful.
</t>
<t>
Decisions (or lack thereof) made by the Designated Expert can be first appealed to
Application Area Directors (contactable using app-ads@tools.ietf.org email address or
directly by looking up their email addresses on http://www.iesg.org/ website) and, if the
appellant is not satisfied with the response, to the full IESG (using the iesg@iesg.org
mailing list).
</t>
<t>
IANA should only accept registry updates from the Designated Expert(s), and should direct
all requests for registration to the review mailing list.
</t>
<section title='Registration Template'>
<t>
<list style='hanging'>
<t hangText='Error name:'>
<vspace />
The name requested (e.g., "example").
</t>
<t hangText='Error usage location:'>
<vspace />
The location(s) where the error can be used. The possible locations are:
authorization code grant error response (<xref target='code-authz-error' />),
implicit grant error response (<xref target='implicit-authz-error' />), or token
error response (<xref target='token-errors' />).
</t>
<t hangText='Related protocol extension:'>
<vspace />
The name of the extension grant type, access token type, or extension parameter,
the error code is used in conjunction with.
</t>
<t hangText='Change controller:'>
<vspace />
For standards-track RFCs, state "IETF". For others, give the name of the
responsible party. Other details (e.g., postal address, e-mail address, home page
URI) may also be included.
</t>
<t hangText='Specification document(s):'>
<vspace />
Reference to document that specifies the error code, preferably including a URI
that can be used to retrieve a copy of the document. An indication of the relevant
sections may also be included, but is not required.
</t>
</list>
</t>
</section>
</section>
</section>
<section title='Acknowledgements'>
<t>
This specification is the work of the OAuth Working Group which includes dozens of active
and dedicated participants. In particular, the following individuals contributed ideas,
feedback, and wording which shaped and formed the final specification:
</t>
<t>
Michael Adams, Andrew Arnott, Dirk Balfanz, Blaine Cook, Brian Campbell, Leah Culver,
Bill de hÓra, Brian Eaton, Brian Ellin, Igor Faynberg, George Fletcher, Tim Freeman,
Evan Gilbert, Yaron Goland, Brent Goldman, Kristoffer Gronowski, Justin Hart, Craig Heath,
Phil Hunt, Michael B. Jones, John Kemp, Mark Kent, Raffi Krikorian, Chasen Le Hara,
Rasmus Lerdorf, Torsten Lodderstedt, Hui-Lan Lu, Paul Madsen, Alastair Mair, Eve Maler,
James Manger, Laurence Miao, Chuck Mortimore, Justin Richer, Peter Saint-Andre,
Nat Sakimura, Rob Sayre, Marius Scurtescu, Naitik Shah, Luke Shepard, Justin Smith,
Jeremy Suriel, Christian Stübner, Paul Tarjan, Allen Tom, Franklin Tse, Nick Walker,
Skylar Woodward.
</t>
<t>
The initial OAuth 2.0 protocol specification was edited by David Recordon, based on two
previous publications: the OAuth 1.0 community specification <xref target='RFC5849' />, and
OAuth WRAP (OAuth Web Resource Authorization Profiles)
<xref target='I-D.draft-hardt-oauth-01' />.
</t>
<t>
The OAuth 1.0 community specification was edited by Eran Hammer-Lahav and authored by
Mark Atwood, Dirk Balfanz, Darren Bounds, Richard M. Conlan, Blaine Cook, Leah Culver,
Breno de Medeiros, Brian Eaton, Kellan Elliott-McCrea, Larry Halff, Eran Hammer-Lahav,
Ben Laurie, Chris Messina, John Panzer, Sam Quigley, David Recordon, Eran Sandler,
Jonathan Sergent, Todd Sieling, Brian Slesinsky, and Andy Smith.
</t>
<t>
The OAuth WRAP specification was edited by Dick Hardt and authored by Brian Eaton,
Yaron Goland, Dick Hardt, and Allen Tom.
</t>
</section>
<appendix title="Editor's Notes">
<t>
While many people contributed to this specification throughout its long journey, the editor
would like to acknowledge and thank a few individuals for their outstanding and invaluable
efforts leading up to the publication of this specification. It is these individuals without
whom this work would not have existed, or reached its successful conclusion.
</t>
<t>
David Recordon for continuously being one of OAuth’s most valuable assets, bringing
pragmatism and urgency to the work, and helping shape it from its very beginning, as well
as being one of the best collaborators I had the pleasure of working with.
</t>
<t>
Mark Nottingham for introducing OAuth to the IETF and setting the community on this course.
Lisa Dusseault for her support and guidance as the Application area director. Blaine Cook,
Peter Saint-Andre, and Hannes Tschofenig for their work as working group chairs.
</t>
<t>
James Manger for his creative ideas and always insightful feedback. Brian Campbell,
Torsten Lodderstedt, Chuck Mortimore, Justin Richer, Marius Scurtescu, and Luke Shepard for
their continued participation and valuable feedback.
</t>
<t>
Special thanks goes to Mike Curtis and Yahoo! for their unconditional support of this work
for over three years.
</t>
</appendix>
</middle>
<back>
<references title='Normative References'>
<?rfc include='http://xml.resource.org/public/rfc/bibxml/reference.RFC.2119.xml' ?>
<?rfc include='http://xml.resource.org/public/rfc/bibxml/reference.RFC.2616.xml' ?>
<?rfc include='http://xml.resource.org/public/rfc/bibxml/reference.RFC.2617.xml' ?>
<?rfc include='http://xml.resource.org/public/rfc/bibxml/reference.RFC.3986.xml' ?>
<?rfc include='http://xml.resource.org/public/rfc/bibxml/reference.RFC.4627.xml' ?>
<?rfc include='http://xml.resource.org/public/rfc/bibxml/reference.RFC.5226.xml' ?>
<?rfc include='http://xml.resource.org/public/rfc/bibxml/reference.RFC.5234.xml' ?>
<?rfc include='http://xml.resource.org/public/rfc/bibxml/reference.RFC.5246.xml' ?>
<?rfc include='http://xml.resource.org/public/rfc/bibxml4/reference.W3C.REC-html401-19991224.xml' ?>
</references>
<references title='Informative References'>
<?rfc include='http://xml.resource.org/public/rfc/bibxml/reference.RFC.5849.xml' ?>
<?rfc include='http://xml.resource.org/public/rfc/bibxml3/reference.I-D.draft-ietf-oauth-v2-bearer-02.xml' ?>
<?rfc include='http://xml.resource.org/public/rfc/bibxml3/reference.I-D.draft-ietf-oauth-saml2-bearer-03.xml' ?>
<?rfc include='http://xml.resource.org/public/rfc/bibxml3/reference.I-D.draft-hammer-oauth-v2-mac-token-02.xml' ?>
<?rfc include='http://xml.resource.org/public/rfc/bibxml2/reference.OASIS.saml-core-2.0-os.xml' ?>
<reference anchor="I-D.draft-hardt-oauth-01">
<front>
<title>OAuth Web Resource Authorization Profiles</title>
<author initials="D" surname="Hardt" fullname="Dick Hardt" role="editor" />
<author initials="A" surname="Tom" fullname="Allen Tom" />
<author initials="B" surname="Eaton" fullname="Brian Eaton" />
<author initials="Y" surname="Goland" fullname="Yaron Goland" />
<date month="January" day="15" year="2010" />
</front>
<format type="TXT" target="http://www.ietf.org/internet-drafts/draft-hardt-oauth-01.txt" />
</reference>
</references>
</back>
</rfc>
| PAFTECH AB 2003-2026 | 2026-04-23 02:11:34 |