One document matched: draft-ietf-mile-rfc6046-bis-05.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE rfc SYSTEM "rfc2629.dtd">
<rfc ipr="trust200902" 
     category="std" 
     docName="draft-ietf-mile-rfc6046-bis-05.txt"
     obsoletes="6046">
<?rfc compact="yes"?>
<?rfc subcompact="yes"?>
<?rfc toc="no"?>
<?rfc symrefs="yes"?>

<front>
  <title abbrev="RID Transport">
    Transport of Real-time Inter-network Defense (RID) Messages over HTTP/TLS
  </title>
  <author initials="B." surname="Trammell" fullname="Brian Trammell">
    <organization abbrev="ETH Zurich">
      Swiss Federal Institute of Technology Zurich
    </organization>
    <address>
      <postal>
        <street>Gloriastrasse 35</street>
        <city>8092 Zurich</city>
        <country>Switzerland</country>
      </postal>
      <phone>+41 44 632 70 13</phone>
      <email>trammell@tik.ee.ethz.ch</email>
    </address>
  </author>
  <date month="January" day="3" year="2012"></date>
  <area>Security</area>
  <workgroup>MILE Working Group</workgroup>
  <keyword>Coordinated Incident Response</keyword>
  <keyword>CSIRT</keyword>
  <keyword>Incident Object Description Exchange Format</keyword>
  <keyword>IODEF</keyword>
  <abstract> 

    <t>The Incident Object Description Exchange Format (IODEF) defines a
    common XML format for document exchange, and Realtime Internetwork Defense
    (RID) defines extensions to IODEF intended for the cooperative handling of
    security incidents within consortia of network operators and enterprises.
    This document specifies a transport protocol for RID based upon the
    passing of RID messages over HTTP/TLS.</t>

  </abstract>
</front>

<middle>

  <section title="Introduction" anchor="intro-sec">

  <t>The <xref target="RFC5070">Incident Object Description Exchange Format
  (IODEF)</xref> describes an XML document format for the purpose of
  exchanging data between Computer Security Incident Response Teams (CSIRTs)
  or those responsible for security incident handling for service providers
  (SPs). The defined document format provides an easy way for CSIRTs to
  exchange data in a way which can be easily parsed.</t>

  <t>IODEF defines a message format, not a transport protocol, as the sharing
  of messages is assumed to be out of scope in order to allow CSIRTs to
  exchange and store messages in a way most suited to their established
  incident handling processes. However, <xref
  target="I-D.ietf-mile-rfc6045-bis">Real-time Inter-network Defense
  (RID)</xref> do require a specification of a transport protocol to ensure
  interoperability among members in a RID consortium. This document specifies
  the transport of RID messages within <xref target="RFC2616">HTTP</xref>
  Request and Response messages transported over <xref
  target="RFC5246">TLS</xref> (herein, HTTP/TLS). Note that any IODEF
  message may also be transported using this mechanism, by sending it as a RID
  Report message.</t>
  
  <section title="Changes from RFC6046">
    <t>This document contains the following changes with respect to its predecessor <xref target="RFC6046"/>:</t>

    <t><list style="symbols">
      <t>The intended status of the document is now Standards Track.</t>
      <t>The document is updated to refer to the updated RID specification, <xref
  target="I-D.ietf-mile-rfc6045-bis"/>, where appropriate.</t>
      <t>Language regarding the use of HTTP/1.1 and TCP ports for RID transport is clarified.</t>
      <t>The RID-Callback-Token entity header is added to allow matching of RID replies during callback, independent of the content of the underlying RID message.</t>
      <t>The minimum required version of TLS is upgraded to 1.1, and the minimum recommend version to 1.2.</t>
    </list></t>

    <t>This document, when published, obsoletes <xref target="RFC6046"/> and moves it to Historic status.</t>
  </section>
  
  </section>
 
  <section title="Terminology and Normative Sections" anchor="terminology-sec">

    <t>The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
    "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
    document are to be interpreted as described in <xref
    target="RFC2119"/>.</t>

    <t>RID systems participating in a consortium are required to fully
    implement the protocol in <xref target="rid-https-sec"/> in order to
    interoperate within the consortium; the remainder of this document is
    informative, and provides helpful background or explanatory
    information.</t>

     <!-- old paragraph --> <!-- <t>All sections which use these key words are
    declared as normative, unless specifically noted otherwise. All normative
    sections MUST be followed by implementations of this standard. Sections
    which are not declared as normative are informative; these provide helpful
    background information and considerations for implementations.
    Specifically, the normative sections in this document are... </t>-->

  </section>

  <section title="Transmission of RID Messages over HTTP/TLS"
  anchor="rid-https-sec">

    <t>This section specifies the details of the transport of <xref
    target="I-D.ietf-mile-rfc6045-bis">RID messages</xref> over HTTP/TLS.
    In this arrangement, each RID server is both an HTTP/TLS server and an
    HTTP/TLS client. When a RID message is sent, the sending RID system
    connects to the receiving RID system and sends the message, optionally
    receiving a message in reply. All RID systems MUST be prepared to accept
    HTTP/TLS connections from any RID peer with which it communicates, in
    order to support callback for delayed replies (see below).</t>

    <t><xref target="RFC3205">BCP 56</xref> contains a number of important
    considerations when using HTTP for application protocols. These include
    the size of the payload for the application, whether the application will
    use a web browser, whether the protocol should be defined on a port other
    than 80, and if the security provided through HTTP/TLS suits the needs of
    the new application.</t>

    <t>It is acknowledged within the scope of these concerns that HTTP/TLS is
    not ideally suited for RID transport, as the former is a client-server
    protocol and the latter a message-exchange protocol; however, the ease of
    implementation of RID systems over HTTP/TLS outweighs these concerns.
    Consistent with BCP 56, RID systems listen for TCP connections on port
    4590 (see <xref target="iana-sec"/>). Every RID system participating in a
    consortium MUST listen for HTTP/TLS connections on the assigned port. RID
    systems SHOULD NOT use TCP port 443 (the standard port for HTTP over
    TLS) for RID messages, to avoid confusing standard HTTP/TLS servers for
    RID systems.</t>

    <t>RID systems MUST implement all REQUIRED functionality for <xref
    target="RFC2616">HTTP/1.1</xref>. All RID messages sent in HTTP Requests
    MUST be sent using the POST method with a Request-URI of '/'. As RID
    documents are XML, the RID media type is 'text/xml'; i.e., the
    'Content-type' Request and Response headers MUST be 'text/xml'. As RID
    messages MUST be sent using the POST method, the GET and HEAD methods have
    no particular meaning on a RID system; a RID system SHOULD answer 'GET /'
    or 'HEAD /' with 204 No Content. Other Request-URIs are reserved for
    future use; any access to Request-URIs other than '/' by any method on a
    RID system SHOULD return the appropriate HTTP error (404 Not Found). </t>

    <t>Since the content of RID messages is essentially declarative, a RID
    system interrupted during transport MAY simply repeat the transaction; the
    sending of a RID message is idempotent.</t>

    <t>As the queries and replies in a RID message exchange may be
    significantly separated in time, RID over HTTP/TLS supports a callback
    mechanism. In this mechanism, the receiving RID system MAY return a 202
    Accepted response, called a RID callback, instead of a RID message. The
    RID callback MUST contain a zero-length entity body and a
    'RID-Callback-Token' entity header, itself containing a unique token
    generated by the receiving RID system. This token is a string that MUST
    uniquely identify the callback among all callbacks from the receiving RID
    system to the sending RID system. Due to the amount of time that may be
    required to generate a RID Result or Report response, there is no upper
    bound on the time period for this uniqueness requirement. When performing
    RID callback, a responding system MUST connect to TCP port 4590 on the
    network-layer address from which the original request was sent; there is
    no mechanism in RID for redirected callback.</t>

    <t>While a RID system SHOULD return the reply in an HTTP Response if it is
    available immediately or within a generally accepted HTTP client timeout
    (about thirty seconds), this is not mandatory, and as such RID systems
    MUST be prepared for a query to be met with a 202 Accepted, an empty
    Response body, a connection termination and a callback. Note that all RID
    messages require a response from the receiving RID system, so a sending
    RID system can expect either an immediate response or a callback.</t>

    <t><xref target="ridpairs_tab"/> lists the allowable RID message types in
    an HTTP Response for a given RID message type in the Request. A RID system
    MUST be prepared to handle an HTTP Response of the given type(s) when
    sending the corresponding HTTP Request. A RID system MUST NOT send an HTTP
    Response containing any RID message other than the one corresponding to
    the one sent in the HTTP Request.</t>

    <texttable anchor="ridpairs_tab"> 
        <ttcol align="left">Request RID type</ttcol>
        <ttcol align="center">Callback</ttcol>
        <ttcol align="left">Result</ttcol>
        <ttcol align="left">Response RID type</ttcol> 
        <c>TraceRequest</c><c></c><c>200</c><c>RequestAuthorization</c>
        <c>TraceRequest</c><c></c><c>200</c><c>Result</c>
        <c>TraceRequest</c><c></c><c>202</c><c>[empty]</c>
        <c>RequestAuthorization</c><c>X</c><c>202</c><c>[empty]</c>
        <c>Result</c><c>X</c><c>202</c><c>[empty]</c>
        <c>Investigation</c><c></c><c>200</c><c>Result</c>
        <c>Investigation</c><c></c><c>202</c><c>[empty]</c>
        <c>Report</c><c>X</c><c>202</c><c>[empty]</c>
        <c>IncidentQuery</c><c></c><c>200</c><c>Report</c>
        <c>IncidentQuery</c><c></c><c>202</c><c>[empty]</c>
    </texttable>

    <t>For security purposes, RID systems SHOULD NOT return 3xx Redirection
    response codes, and MUST NOT follow any 3xx Redirection. The protocol
    provides no in-band method for handling a change of address of a RID
    System. For this reason, the use of stable DNS names to address RID
    Systems is RECOMMENDED.</t>

    <t>If a RID system receives an improper RID message in an HTTP
    Request, it MUST return an appropriate 4xx Client Error result code to the
    requesting RID system. If a RID system cannot process a RID message
    received in an HTTP Request due to an error on its own side, it MUST
    return an appropriate 5xx Server Error result code to the requesting RID
    system.</t>

    <t>Note that HTTP provides no mechanism for signaling to a server that a
    response body is not a valid RID message. If an RID system receives an
    improper RID message in an HTTP Response, or cannot process a RID message
    received in an HTTP Response due to an error on its own side, it MUST log
    the error and present it to the RID system administrator for handling; the
    error logging format is an implementation detail and is considered out of
    scope for this specification.</t>

    <t>RID systems MUST support and SHOULD use HTTP/1.1 persistent connections
    as described in <xref target="RFC2616"/>. RID systems MUST support chunked
    transfer encoding on the HTTP server side to allow the implementation of
    clients that do not need to pre-calculate message sizes before
    constructing HTTP headers.</t>

    <t>RID systems MUST use TLS version 1.1 <xref target="RFC4346"/> or higher
   with mutual authentication for transport confidentiality, identification,
   and authentication, as in <xref target="RFC2818"/>. RID systems MUST
   support TLS version 1.1 and SHOULD support TLS version 1.2 <xref
   target="RFC5246"/>; RID systems MUST NOT request, offer, or use any
   version of SSL, or any version of TLS prior to 1.1, due to known security
   vulnerabilities in prior versions of the protocol; see Appendix E of <xref
   target="RFC5246"/> for more.</t>

   <t>The TLS session MUST use non-NULL ciphersuites for authentication,
   integrity, and confidentiality. Sessions MAY be renegotiated within these
   constraints.</t>


    <t>Each RID consortium SHOULD use a trusted public key infrastructure
    (PKI) to manage identities for RID systems participating in TLS
    connections. At minimum, each RID system MUST trust a set of <xref
    target="RFC5280">X.509 Issuer identities ("Certificate
    Authorities")</xref> to directly authenticate RID system peers with which
    it is willing to exchange information, and/or a specific white list of
    X.509 Subject identities of RID system peers.</t>

    <t>RID systems MUST provide for the verification of the identity of a RID
    system peer presenting a valid and trusted certificate, by verifying the
    fully-qualified domain name and service name from the DNS SRV record, if
    available, against that stored in the certificate, as in Section 6 of
    <xref target="RFC6125"/>.</t>

  </section>

  <section title="Security Considerations" anchor="security-sec">

    <t>In addition to the final paragraphs in <xref target="rid-https-sec"/>
    on the use of TLS to secure RID message transport, all security
    considerations of related documents apply, especially the <xref
    target="RFC5070">Incident Object Description Exchange Format
    (IODEF)</xref> and <xref target="I-D.ietf-mile-rfc6045-bis">Real-time
    Inter-network Defense (RID)</xref>. The transport described herein is
    built on the foundation of these documents; the security considerations
    contained therein are incorporated by reference.</t>

  </section>

  <section title="IANA Considerations" anchor="iana-sec">

    <t>Consistent with <xref target="RFC3205">BCP 56</xref>, since RID over
    HTTP/TLS is a substantially new service, and should be controlled at the
    consortium member network's border differently than HTTP/TLS, it requires
    a new port number. IANA has assigned port 4590/tcp to RID with service
    name RID over HTTP/TLS.</t>

    <t>[NOTE to IANA: Since this document obsoletes RFC 6046, please update
    the reference in the Port Numbers registry for 4590/tcp to point to this
    document.]</t>

  </section>

  <section title="Acknowledgments" anchor="ack-sec">

    <t>The author would like to thank David Black for the review, and Kathleen Moriarty for work on earlier revisions of this specification.</t>

  </section>

</middle>

<back>

<references title="Normative References">
  <?rfc include="reference.RFC.2119" ?>
  <?rfc include="reference.RFC.2616" ?>
  <?rfc include="reference.RFC.2818" ?>
  <?rfc include="reference.RFC.5070" ?>
  <?rfc include="reference.RFC.5246" ?>
  <?rfc include="reference.RFC.5280" ?>
  <?rfc include="reference.I-D.ietf-mile-rfc6045-bis" ?>
  <?rfc include="reference.RFC.6125" ?>

</references> 

<references title="Informative References">
  <?rfc include="reference.RFC.3205" ?>
  <?rfc include="reference.RFC.4346" ?>
  <?rfc include="reference.RFC.6046" ?>
</references> 

</back>
</rfc>