One document matched: draft-ietf-bfd-tc-mib-03.xml
<?txt version="1.0" encoding="US-ASCII"?>
<!-- change the "txt" on the previous line to "xml" to make this a valid XML2RFC template -->
<!-- this is version 5 of this xml2rfc template -->
<!DOCTYPE rfc SYSTEM "rfc2629.dtd" [
<!ENTITY rfc2119 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2119.xml">
<!ENTITY rfc2223 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2223.xml">
<!ENTITY rfc2578 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2578.xml">
<!ENTITY rfc2579 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2579.xml">
<!ENTITY rfc2580 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2580.xml">
<!ENTITY rfc2629 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2629.xml">
<!ENTITY rfc3410 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.3410.xml">
<!ENTITY rfc4181 SYSTEM "http://xml.resource.org/public/rfc/bibxml/reference.RFC.4181.xml">
]>
<?rfc toc="yes"?>
<?rfc symrefs="yes"?>
<?rfc compact="yes"?>
<?rfc subcompact="no"?>
<?rfc strict="no"?>
<?rfc rfcedstyle="yes"?>
<?rfc comments="yes"?>
<?rfc inline="yes"?>
<rfc category="std" docName="draft-ietf-bfd-tc-mib-03" ipr="trust200902">
<front>
<title abbrev="BFD-TC-STD-MIB">Definitions of Textual Conventions (TCs) for Bidirectional Forwarding Detection (BFD) Management</title>
<author fullname="Thomas D. Nadeau" initials="T"
surname="Nadeau">
<organization>Juniper Networks</organization>
<address>
<email>tnadeau@juniper.net</email>
</address>
</author>
<author fullname="Zafar Ali" initials="Z"
surname="Ali">
<organization>Cisco Systems</organization>
<address>
<email>zali@cisco.com</email>
</address>
</author>
<author fullname="Nobo Akiya" initials="N"
surname="Akiya">
<organization>Cisco Systems</organization>
<address>
<email>nobo@cisco.com</email>
</address>
</author>
<date year="2013" />
<!-- IETF area is optional -->
<area>BFD Working Group</area>
<!--WG name at the upperleft corner of the doc,
IETF is fine for non-WG IETF submissions -->
<workgroup>Network Working Group</workgroup>
<keyword>Network Management</keyword>
<keyword>Management Information Base</keyword>
<keyword>MIB</keyword>
<keyword>SMIv2</keyword>
<keyword>BFD</keyword>
<!--add additional keywords here for IETF website search engine -->
<abstract>
<t>This draft defines a Management Information Base (MIB) module which contains Textual Conventions to represent commonly used Bidirectional Forwarding Detection (BFD) management information. The intent is that these TEXTUAL CONVENTIONS (TCs) will be imported and used in BFD related MIB modules that would otherwise define their own representations.</t>
</abstract>
<note title="Requirements Language">
<t>The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14, RFC 2119 <xref target="RFC2119"></xref>.</t>
</note>
</front>
<middle>
<section title="The Internet-Standard Management Framework">
<t>For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 <xref target="RFC3410"></xref>.</t>
<t>Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 <xref target="RFC2578"></xref>, STD 58, RFC 2579 <xref target="RFC2579"></xref> and STD 58, RFC 2580 <xref target="RFC2580"></xref>.</t>
</section>
<section title="Introduction">
<t>This document defines a MIB module which contains Textual Conventions for Bidirectional Forwarding Detection (BFD) protocols. These Textual Conventions should be imported by MIB modules which manage BFD protocols.</t>
<t>For an introduction to the concepts of BFD, see <xref target="RFC5880" />, <xref target="RFC5881" /> and <xref target="RFC5883" />.</t>
</section>
<section title="BFD Textual Conventions MIB Definitions">
<t>This MIB module makes references to the following documents. <xref target="RFC2579" />, <xref target="RFC2580" />, <xref target="RFC2863" />, <xref target="RFC4001" />, and <xref target="RFC3413" />.</t>
<t>
<figure>
<preamble></preamble>
<artwork><![CDATA[
BFD-TC-STD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, mib-2, Unsigned32
FROM SNMPv2-SMI -- [RFC2578]
TEXTUAL-CONVENTION
FROM SNMPv2-TC; -- [RFC2579]
bfdTCStdMib MODULE-IDENTITY
LAST-UPDATED "201306191200Z" -- 19 June 2013 12:00:00 EST
ORGANIZATION "IETF Bidirectional Forwarding Detection
Working Group"
CONTACT-INFO
"Thomas D. Nadeau
Juniper Networks
Email: tnadeau@lucidvision.com
Zafar Ali
Cisco Systems, Inc.
Email: zali@cisco.com
Nobo Akiya
Cisco Systems, Inc.
Email: nobo@cisco.com"
DESCRIPTION
"This MIB module defines TEXTUAL-CONVENTIONs for concepts
used in Bidirectional Forwarding Detection (BFD)
protocols."
REVISION "201306191200Z" -- 19 June 2013 12:00:00 EST
DESCRIPTION
"Initial version. Published as RFC xxxx."
-- RFC Ed.: RFC-editor pls fill in xxxx
::= { mib-2 XXX }
-- RFC Ed.: assigned by IANA, see section 5 for details
BfdSessIndexTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An index used to uniquely identify BFD sessions."
SYNTAX Unsigned32 (1..4294967295)
BfdIntervalTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The BFD interval in microseconds."
SYNTAX Unsigned32 (0..4294967295)
BfdMultiplierTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The BFD failure detection multiplier."
SYNTAX Unsigned32 (1..255)
BfdDiagTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A common BFD diagnostic code."
SYNTAX INTEGER {
noDiagnostic(0),
controlDetectionTimeExpired(1),
echoFunctionFailed(2),
neighborSignaledSessionDown(3),
forwardingPlaneReset(4),
pathDown(5),
concatenatedPathDown(6),
administrativelyDown(7),
reverseConcatenatedPathDown(8)
}
BfdSessTypeTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"BFD session type"
REFERENCE
"Katz, D. and D. Ward, Bidirectional Forwarding
Detection (BFD), RFC 5880, June 2010.
Katz, D. and D. Ward, Bidirectional Forwarding
Detection (BFD) for IPv4 and IPv6 (Single Hop),
RFC 5881, June 2010.
Katz, D. and D. Ward, Bidirectional Forwarding
Detection (BFD) for Multihop Paths, RFC 5883,
June 2010."
SYNTAX INTEGER {
singleHop(1),
multiHopTotallyArbitraryPaths(2),
multiHopOutOfBandSignaling(3),
multiHopUnidirectionalLinks(4),
multiPointHead(5),
multiPointTail(6)
}
BfdSessOperModeTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"BFD session operating mode"
REFERENCE
"Katz, D. and D. Ward, "Bidirectional Forwarding
Detection (BFD)", RFC 5880, June 2010."
SYNTAX INTEGER {
asyncModeWEchoFunction(1),
asynchModeWOEchoFunction(2),
demandModeWEchoFunction(3),
demandModeWOEchoFunction(4)
}
BfdCtrlDestPortNumberTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"UDP destination port number of BFD control packets.
3784 represents single hop BFD session.
4784 represents multi hop BFD session.
However, syntax is left open to wider range of values
purposely for two reasons:
1. implementation uses non-compliant port number for
valid proprietary reason.
2. potential future extension drafts."
REFERENCE
"Use of port 3784 from Katz, D. and D. Ward,
Bidirectional Forwarding
Detection (BFD) for IPv4 and IPv6 (Single Hop)",
RFC 5881, June 2010.
Use of port 4784 from Katz, D. and D. Ward, Bidirectional
Forwarding Detection (BFD) for IPv4 and IPv6
(Single Hop), RFC 5881, June 2010."
SYNTAX Unsigned32 (0..65535)
BfdCtrlSourcePortNumberTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"UDP source port number of BFD control packets.
However, syntax is left open to wider range of values
purposely for two reasons:
1. implementation uses non-compliant port number for
valid proprietary reason.
2. potential future extension drafts."
REFERENCE
"Port 49152..65535 (RFC5881)"
SYNTAX Unsigned32 (0..65535)
BfdSessStateTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"BFD session state. State failing(5) is only applicable if
corresponding session is running in BFD version 0."
REFERENCE
"RFC 5880 - Bidirectional Forwarding Detection (BFD), Katz,
D., Ward, D., June 2010."
SYNTAX INTEGER {
adminDown(1),
down(2),
init(3),
up(4),
failing(5)
}
BfdSessAuthenticationTypeTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"BFD authentication type"
REFERENCE
"Sections 4.2 - 4.4 from Katz, D. and D. Ward,
Bidirectional Forwarding Detection (BFD),
RFC 5880, June 2010."
SYNTAX INTEGER {
noAuthentication(-1),
reserved(0),
simplePassword(1),
keyedMD5(2),
meticulousKeyedMD5(3),
keyedSHA1(4),
meticulousKeyedSHA1(5)
}
BfdSessionAuthenticationKeyTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x "
STATUS current
DESCRIPTION
"BFD authentication key type.
A BfdSessionAuthenticationKeyTC is always interpreted within
the context of an BfdSessAuthenticationTypeTC value. Every
usage of the BfdSessionAuthenticationTypeTC textual
convention is required to specify the
BfdSessionAuthenticationKeyTC object that provides the
context. It is suggested that the
BfdSessionAuthentcationTypeTC object be logically registered
before the object(s) that use the
BfdSessionAuthenticationKeyTC textual convention, if they
appear in the same logical row.
The value of a BfdSessionAuthenticationKeyTC must always be
consistent with the value of the associated
BfdSessionAuthencationTypeTC object. Attempts to set a
BfdSessionAuthenticationKeyTC object to a value inconsistent
with the associated BfdSessionAuthenticationTypeTC must fail
with an inconsistentValue error.
The following size constraints for a
BfdSessionAuthenticationKeyTC object are defined for the
associated BfdSessionAuthenticationTypeTC values show below:
noAuthentication(-1): SIZE(0)
reserved(0): SIZE(0)
simplePassword(1): SIZE(1..16)
keyedMD5(2): SIZE(16)
meticulousKeyedMD5(3): SIZE(16)
keyedSHA1(4): SIZE(20)
meticulousKeyedSHA1(5): SIZE(20)
When this textual convention is used as the syntax of an
index object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, STD 58. In this case,
the object definition MUST include a 'SIZE' clause to limit
the number of potential instance sub-identifiers; otherwise
the applicable constraints MUST be stated in the appropriate
conceptual row DESCRIPTION clauses, or in the surrounding
documentation if there is no single DESCRIPTION clause that
is appropriate."
REFERENCE
"RFC5880, Sections 4.2 - 4.4"
SYNTAX OCTET STRING(SIZE(0..252))
END
]]></artwork>
<postamble></postamble>
</figure>
</t>
</section>
<section title="Security Considerations">
<t>This module does not define any management objects. Instead, it defines a set of textual conventions which may be used by other BFD MIB modules to define management objects.</t>
<t>Meaningful security considerations can only be written in the MIB modules that define management objects. Therefore, this document has no impact on the security of the Internet.</t>
</section>
<section title="IANA Considerations">
<figure>
<preamble></preamble>
<artwork><![CDATA[
The MIB module in this document uses the following IANA-assigned
OBJECT IDENTIFIER values recorded in the SMI Numbers registry:
Descriptor OBJECT IDENTIFIER value
---------- -----------------------
bfdTCStdMib { mib-2 XXX }
]]></artwork>
<postamble></postamble>
</figure>
<t>[Editor's Note (to be removed prior to publication): the IANA is requested to assign a value for "XXX" under the 'mib-2' subtree and to record the assignment in the SMI Numbers registry. When the assignment has been made, the RFC Editor is asked to replace "XXX" (here and in the MIB module) with the assigned value and to remove this note.]</t>
</section>
</middle>
<back>
<references title="Normative References">
&rfc2119;
&rfc2578;
&rfc2579;
&rfc2580;
<?rfc include="reference.RFC.5880"?>
<?rfc include="reference.RFC.5881"?>
<?rfc include="reference.RFC.5883"?>
</references>
<references title="Informative References">
&rfc3410;
<?rfc include="reference.RFC.4001"?>
<?rfc include="reference.RFC.2863"?>
<?rfc include="reference.RFC.3413"?>
</references>
<section title="Acknowledgments">
<t>Authors would like to thank David Ward and Jeffrey Haas for their comments and suggestions.</t>
</section>
<!-- Change Log
v13 2013-06-18 Nobo: Ported -01 to XML and fixed nits.
-->
</back>
</rfc>
| PAFTECH AB 2003-2026 | 2026-04-23 10:54:15 |