One document matched: draft-ietf-avtcore-monarch-06.xml
<?xml version="1.0" encoding="UTF-8"?>
<!-- edited with XMLSPY v5 rel. 3 U (http://www.xmlspy.com)
by Daniel M Kohn (private) -->
<!DOCTYPE rfc SYSTEM "rfc2629.dtd" [
<!ENTITY rfc2119 PUBLIC "" "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2119.xml">
]>
<rfc category="info" docName="draft-ietf-avtcore-monarch-06.txt"
ipr="trust200902">
<?xml-stylesheet type='text/xsl' href='rfc2629.xslt' ?>
<?rfc toc="yes" ?>
<?rfc symrefs="yes" ?>
<?rfc sortrefs="yes"?>
<?rfc iprnotified="no" ?>
<?rfc strict="yes" ?>
<front>
<title abbrev="RTP Monitoring Architectures">Monitoring Architectures for
RTP</title>
<author fullname="Qin Wu" initials="Q." role="editor" surname="Wu">
<organization>Huawei</organization>
<address>
<postal>
<street>101 Software Avenue, Yuhua District</street>
<city>Nanjing</city>
<region>Jiangsu</region>
<code>210012</code>
<country>China</country>
</postal>
<email>sunseawq@huawei.com</email>
</address>
</author>
<author fullname="Geoff Hunt" initials="G." surname="Hunt">
<organization>Unaffiliated</organization>
<address>
<email>r.geoff.hunt@gmail.com</email>
</address>
</author>
<author fullname="Philip Arden" initials="P.J." surname="Arden">
<organization abbrev="BT">BT</organization>
<address>
<postal>
<street>Orion 3/7 PP4</street>
<street>Adastral Park</street>
<street>Martlesham Heath</street>
<city>Ipswich</city>
<region>Suffolk</region>
<code>IP5 3RE</code>
<country>United Kingdom</country>
</postal>
<phone>+44 1473 644192</phone>
<email>philip.arden@bt.com</email>
</address>
</author>
<date month="November" year="2011" />
<area>Real-time Applications and Infrastructure Area</area>
<workgroup>Audio/Video Transport Working Group</workgroup>
<keyword>RFC</keyword>
<keyword>Request for Comments</keyword>
<keyword>I-D</keyword>
<keyword>Internet-Draft</keyword>
<keyword>Real Time Control Protocol</keyword>
<abstract>
<t>This memo proposes an architecture for extending RTCP with a new RTCP
XR (RFC3611) block type to report new metrics regarding media
transmission or reception quality, following RTCP guideline established
in RFC5968. This memo suggests that a new block should contain a single
metric or a small number of metrics relevant to a single parameter of
interest or concern, rather than containing a number of metrics which
attempt to provide full coverage of all those parameters of concern to a
specific application. Applications may then "mix and match" to create a
set of blocks which covers their set of concerns. Where possible, a
specific block should be designed to be re-usable across more than one
application, for example, for all of voice, streaming audio and
video.</t>
</abstract>
</front>
<middle>
<section anchor="intro" title="Introduction">
<t>As more users and subscribers rely on real time application services,
uncertainties in the performance and availability of these services are
driving the need to support new standard methods for gathering
performance metrics from RTP applications. These rapidly emerging
standards, such as RTCP XR <xref target="RFC3611"></xref> and other RTCP
extension to Sender Reports (SR), Receiver Reports (RR) <xref
target="RFC3550"></xref> are being developed for the purpose of
collecting and reporting performance metrics from endpoint devices that
can be used to correlate the metrics, provide end to end service
visibility and measure and monitor Quality of Experience (QoE).</t>
<t>However the proliferation of RTP/RTCP specific metrics for transport
and application quality monitoring has been identified as a potential
problem for RTP/RTCP interoperability, which attempt to provide full
coverage of all those parameters of concern to a specific application.
Since different applications layered on RTP may have some monitoring
requirements in common, therefore these metrics should be satisfied by a
common design.</t>
<t>The objective of this document is to define an extensible RTP
monitoring framework to provide a small number of re-usable Quality of
Service (QoS)/QoE metrics which facilitate reduced implementation costs
and help maximize inter-operability. RTCP Guideline <xref
target="RFC5968"></xref> has stated that, where RTCP is to be extended
with a new metric, the preferred mechanism is by the addition of a new
RTCP XR <xref target="RFC3611"></xref> block. This memo assumes that any
requirement for a new metric to be transported in RTCP will use a new
RTCP XR block.</t>
</section>
<section title="Requirements notation">
<t>This memo is informative and as such contains no normative
requirements.</t>
<t>In addition, the following terms are defined:</t>
<t><list style="hanging">
<t hangText="Transport level metrics"><vspace blankLines="1" />A set
of metrics which characterise the three transport impairments of
packet loss, packet delay, and packet delay variation. These metrics
should be usable by any application which uses RTP transport.<vspace
blankLines="1" /></t>
<t hangText="Application level metrics"><vspace
blankLines="1" />Metrics relating to QoE related parameters. These
metrics are measured at the application level and focus on quality
of content rather than network parameters. One example of such
metrics is the QoE Metric specified in QoE metric reporting Block
<xref target="MQ"></xref>. <vspace blankLines="1" /></t>
<t hangText="End System metrics"><vspace blankLines="1" />Metrics
relating to the way a terminal deals with transport impairments
affecting the incident RTP stream. These may include de-jitter
buffering, packet loss concealment, and the use of redundant streams
(if any) for correction of error or loss.<vspace
blankLines="1" /></t>
<t hangText="Direct metrics"><vspace blankLines="1" />Metrics that
can be directly measured or calculated and are not dependent on
other metric.<vspace blankLines="1" /></t>
<t hangText="Composed metrics"><vspace blankLines="1" />Metrics that
are calculated based on direct metric or combination of direct
metric and derived metrics.<vspace blankLines="1" /></t>
<t hangText="Interval metrics"><vspace blankLines="1" /> It is
referred to as the metrics of which the reported values apply to the
most recent measurement interval duration between successive metrics
reports<vspace blankLines="1" /></t>
<t hangText="Cumulative metrics"><vspace blankLines="1" />It is
referred to as the metrics of which the reported values apply to the
accumulation period characteristic of cumulative measurements<vspace
blankLines="1" /></t>
<t hangText="Sample metrics"><vspace blankLines="1" />It is referred
to as the metrics of which the reported values only apply to the
value of a continuously measured or calculated that has been
sampled at end of the interval .<vspace blankLines="1" /></t>
</list></t>
</section>
<section title="RTP monitoring architecture">
<t>The RTP monitoring architecture comprises the following two key
functional components shown below:<list style="symbols">
<t>Monitor</t>
<t>Metric Block Structure</t>
</list></t>
<t>Monitor is the functional component defined in the Real-time
Transport Protocol (RTP) <xref target="RFC3550"></xref> that acts as a
source of information gathered for monitoring purposes. It may gather
such information reported by RTCP XR or other RTCP extension and
calculate statistics from multiple source. According to the definition
of monitor in the RTP Protocol <xref target="RFC3550"></xref>, the end
system that source RTP streams, an intermediate-system that forwards RTP
packets to End-devices or a third party that does not participate in the
RTP session (i.e., the third party monitor depicted in figure 1) can be
envisioned to act as the Monitor within the RTP monitoring
architecture.</t>
<t>The Metric Block exposes real time Application QoS/QoE metric
information in the appropriate report block format to the management
system within the RTP monitoring architecture. Such information can be
formulated as:<list style="symbols">
<t>The direct metrics</t>
<t>or the composed metrics.</t>
</list>or formulated as <list style="symbols">
<t>The Interval metrics</t>
<t>or cumulative metrics</t>
<t>or sample metrics.</t>
</list>Both the RTCP or RTCP XR can be extended to convey these
metrics. The details on transport protocols for metric blocks are
described in <xref target="sec2"></xref>.</t>
<figure anchor="ARCH" title="RTP Monitoring Architecture">
<artwork>
+-------------------+
| RTP Sender | +----------+
| +-----------+ | |Management|
---------------->| Monitor |---------5------->| System |
| | | | | | |
| | +-----------+ | +----------+
| |+-----------------+|
| ||Application || --------------|
| ||-Streaming video || | |
| |---------|-VOIP || | +--------V------+
| | ||-Video conference|| ------ Third Party |
| | ||-Telepresence || | Monitor |
| | ||-Ad insertion || +---------------+
5 | |+-----------------+|
| | +-------------------+
| 1
| | +Intermediate------------+ |-------------- ---- ----+
| | | RTP System Report Block | RTP Receiver >--4-| |
| | | +---------- transported over| +-----------+ | |
| | | | RTCP extension | | Monitor |<-- |
|------------- Monitor |<--------5------|----| |<------|
| | | | Report Block +----/------+ ||
| | +----------+ transported over | ||
| | RTCP XR | |2 ||
| | +-----------------+ | | +-------/---------+ ||
| | |Application | | | |Application | ||
| | |-Streaming video | | | |-Streaming video | ||
| | |-VOIP | | 1 | |-VOIP | 3|
---->-Video conference|--------------->|-Video conference ||
| |-Telepresence | | | |-Telepresence | ||
| |-Ad insertion | | | |-Ad insertion | ||
| +-----------------+ | | +-----------------+ ||
| +-----------------+ | | +-----------------+ ||
| |Transport | | | |Transport | ||
| |-IP/UDP/RTP | | | |-IP/UDP/RTP >---||
| |-IP/TCP/RTP | | | | -IP/TCP/RTP | |
| |-IP/TCP/RTSP/RTP | | | |-IP/TCP/RTSP/RTP | |
| +-----------------+ | | +-----------------+ |
+------------------------+ +------------------------+
</artwork>
</figure>
<t><list style="numbers">
<t>RTP communication between real time applications.</t>
<t>Application level metrics collection.</t>
<t>Transport level metrics collection.</t>
<t>End System metrics collection.</t>
<t>Reporting Session- metrics transmitted over specified
interfaces.</t>
</list></t>
<section anchor="sec2"
title="RTCP Metric Block Report and associated parameters">
<t>The basic RTCP Reception Report (RR) <xref target="RFC3550"></xref>
conveys reception statistics (i.e., transport level statistics) in
metric block report format for multiple RTP media streams including
<list style="symbols">
<t>the fraction of packet lost since the last report</t>
<t>the cumulative number of packets lost</t>
<t>the highest sequence number received</t>
<t>an estimate of the inter-arrival jitter</t>
<t>and information to allow senders to calculate the network round
trip time.</t>
</list>The RTCP XRs <xref target="RFC3611"></xref> supplement the
existing RTCP packets and provide more detailed feedback on reception
quality in several categories:<list style="symbols">
<t>Loss and duplicate RLE reports</t>
<t>Packet-receipt times reports</t>
<t>Round-trip time reports</t>
<t>Statistics Summary Reports</t>
</list></t>
<t>There are also various other scenarios in which it is desirable to
send RTCP Metric reports more frequently. For example, the Audio/Video
Profile with Feedback <xref target="RFC4585"></xref> extends the
standard A/V Profile <xref target="RFC3551"></xref> to allow RTCP
reports to be sent early provided RTCP bandwidth allocation is
respected. The following are four use cases but are not limited
to:<list style="symbols">
<t hangText="Retransmission">RTCP NACK is used to provide feedback
on the RTP sequence number of the lost packets <xref
target="RFC4585"></xref>.</t>
<t hangText="Codec Control">RTCP is extended to convey requests
for full intra-coded frames or select the reference picture, and
signalchanges in the desired temporal/spatial trade-off and
maximum media bit rate <xref target="RFC5104"></xref>.</t>
<t hangText="Congestion Notification">RTCP or RTCP XR is extended
to provide feedback on ECN statistics information <xref
target="ECN"></xref>.</t>
<t hangText="Rapid acquisition of multicast sessions">RTCP XR is
extended to provide feedback on multicast acquisition statistics
information and parameters <xref target="RFC6332"></xref>.</t>
</list></t>
</section>
</section>
<section title="Issues with reporting metric block using RTCP XR extension">
<t>Issues that have come up in the past with reporting metric block
using RTCP XR extensions include (but are probably not limited to) the
following:<list style="symbols">
<t>Using large block. A single report block or metric is designed to
contain a large number of parameters in different classes for a
specific application. For example, the RTCP Extended Reports (XRs)
<xref target="RFC3611"></xref> defines seven report block formats
for network management and quality monitoring. Some of these block
types defined in the RTCP XRs <xref target="RFC3611"></xref> are
only specifically designed for conveying multicast inference of
network characteristics (MINC) or voice over IP (VoIP) monitoring.
However different applications layered on RTP may have different
monitoring requirements. Design large block only for specific
applications may increase implementation cost and minimize
interoperability.</t>
<t>Correlating RTCP XR with the non-RTP data. CNAME defined in the
RTP Protocol <xref target="RFC3550"></xref> is an example of
existing tool that allows to bind an SSRC that may change to a fixed
source name in one RTP session. It may be also fixed across multiple
RTP sessions from the same source. However there may be situations
where RTCP reports are sent to other participating endpoints using
non-RTP protocol in a session. For example, as described in the SIP
RTCP Summary Report Protocol <xref target="RFC6035"></xref>, the
data contained in RTCP XR VoIP metrics reports <xref
target="RFC3611"></xref> are forwarded to a central collection
server systems using SIP. In such case, there is a large portfolio
of quality parameters that can be associated with real time
application,e.g., VOIP application, but only a minimal number of
parameters are included on the RTCP-XR reports. Therefore
correlation between RTCP XR and non-RTP data should be concerned if
administration or management systems need to rely on the mapping
RTCP statistics to non-RTCP measurements to conducts data analysis
and creates alerts to the users. Without such correlation, it is
hard to provide accurate measures of real time application quality
with a minimal number of parameters included on the RTCP-XR reports
in such case.</t>
<t>Measurement Information duplication. Measurement information
provides information relevant to a measurement reported in one or
more other block types. For example we may set a metric interval for
the session and monitor RTP packets within one or several
consecutive metric interval. In such case, the extra meaurement
information (e.g., extended sequence number of 1st packet,
measurement period) may be expected. However if we put such extra
measurement information into each metric block, there may be
situations where an RTCP XR packet containing multiple metric
blocks, reports on the same streams from the same source. In other
words, duplicated data for the measurement is provided multiple
times, once in every metric block. Though this design ensures
immunity to packet loss, it may bring more packetization complexity
and the processing overhead is not completely trivial in some cases.
Therefore compromise between processing overhead and reliability
should be taken into account.</t>
</list></t>
</section>
<section title="Guideline for reporting metric block using RTCP XR">
<section anchor="smallblock" title="Using single metrics blocks">
<t>Different applications using RTP for media transport certainly have
differing requirements for metrics transported in RTCP to support
their operation. For many applications, the basic metrics for
transport impairments provided in RTCP SR and RR packets <xref
target="RFC3550"></xref> (together with source identification provided
in RTCP SDES packets) are sufficient. For other applications
additional metrics may be required or at least sufficiently useful to
justify the overheads, both of processing in endpoints and of
increased session bandwidth. For example an IPTV application using
Forward Error Correction (FEC) might use either a metric of
post-repair loss or a metric giving detailed information about
pre-repair loss bursts to optimise payload bandwidth and the strength
of FEC required for changing network conditions. However there are
many metrics available. It is likely that different applications or
classes of applications will wish to use different metrics. Any one
application is likely to require metrics for more than one parameter
but if this is the case, different applications will almost certainly
require different combinations of metrics. If larger blocks are
defined containing multiple metrics to address the needs of each
application, it becomes likely that many different such larger blocks
are defined, which becomes a danger to interoperability.</t>
<t>To avoid this pitfall, this memo proposes the use of small RTCP XR
metrics blocks each containing a very small number of individual
metrics characterizing only one parameter of interest to an
application running over RTP. For example, at the RTP transport layer,
the parameter of interest might be packet delay variation, and
specifically the metric "IPDV" defined by <xref
target="Y1540"></xref>. See <xref target="example"></xref> for
architectural considerations for a metrics block, using as an example
a metrics block to report packet delay variation.</t>
</section>
<section title="Correlating RTCP XR with the non-RTP data">
<t>There may be situation where more than one media transport
protocols are used by one application to interconnect to the same
session in the gateway. For example, one RTCP XR Packet is sent to the
participating endpoints using non- RTP-based media transport (e.g.,
using SIP) in a VOIP session, one crucial factor lies in how to handle
their different identities that are corresponding to different media
transport.</t>
<t>This memo proposes an approach to facilitate the correlation of the
RTCP Session with other session-related non-RTP data. That is to say
if there is a need to correlate RTP sessions with non-RTP sessions,
then the correlation information needed should be conveyed in a new
RTCP Source Description (SDES) item ,since such correlation
information describes the source, rather than providing a quality
report. An example use case is for a participant endpoint may convey a
call identifier or a global call identifier associated with the SSRC
of measured RTP stream . In such case, the participant endpoint uses
the SSRC of source to bind the call identifier using SDES item in the
SDES RTCP packet and send such correlation to the network management
system. A flow measurement tool that is configured with the 5-tuple
and not call-aware then forward the RTCP XR reports along with the
SSRC of the measured RTP stream which is included in the XR Block
header and 5-tuple to the network management system. Network
management system can then correlate this report using SSRC with other
diagnostic information such as call detail records.</t>
</section>
<section title="Reducing Measurement information repetition">
<t>When multiple metric blocks are carried in one RTCP XR packet,
reporting on the same stream from the same source for the same time
period, RTCP should use the SSRC to identify and correlate the
multiple metric blocks between metric blocks. This memo proposes to
define a new XR Block that will be used to convey the common time
period and the number of packets sent during this period <xref
target="MI"></xref>. In order to reduce measurement information
repetition in one RTCP XR compound packet containing multiple metric
blocks, the measurement information shall be sent before the related
metric blocks that are from the same reporting interval. Note that for
packet loss robustness if the report blocks for the same interval span
over more than one RTCP packet then each must have the measurement
identity information even if though they will be the same.</t>
</section>
</section>
<section anchor="example" title="An example of a metric block">
<t>This section uses the example of an existing proposed metrics block
to illustrate the application of the principles set out in <xref
target="smallblock"></xref>.</t>
<t>The example <xref target="PDV"></xref> is a block to convey
information about packet delay variation (PDV) only, consistent with the
principle that a metrics block should address only one parameter of
interest. One simple metric of PDV is available in the RTCP RR packet as
the "interarrival jitter" field. There are other PDV metrics which may
be more useful to certain applications. Two such metrics are the IPDV
metric (<xref target="Y1540"></xref>, <xref target="RFC3393"></xref>)
and the MAPDV2 metric <xref target="G1020"></xref>. Use of these metrics
is consistent with the principle in Section 5 of RTCP guideline <xref
target="RFC5968"></xref> that metrics should usually be defined
elsewhere, so that RTCP standards define only the transport of the
metric rather than its nature. The purpose of this section is to
illustrate the architecture using the example of <xref
target="PDV"></xref> rather than to document the design of the PDV
metrics block or to provide a tutorial on PDV in general.</t>
<t>Given the availability of at least three metrics for PDV, there are
design options for the allocation of metrics to RTCP XR blocks:</t>
<t><list style="symbols">
<t>provide an RTCP XR block per metric</t>
<t>provide a single RTCP XR block which contains all three
metrics</t>
<t>provide a single RTCP block to convey any one of the three
metrics, together with a identifier to inform the receiving RTP
system of the specific metric being conveyed</t>
</list></t>
<t>In choosing between these options, extensibility is important,
because additional metrics of PDV may well be standardized and require
inclusion in this framework. The first option is extensible but only by
use of additional RTCP XR blocks, which may consume the limited
namespace for RTCP XR blocks at an unacceptable rate. The second option
is not extensible, so could be rejected on that basis, but in any case a
single application is quite unlikely to require transport of more than
one metric for PDV. Hence the third option was chosen. This implies the
creation of a subsidiary namespace to enumerate the PDV metrics which
may be transported by this block, as discussed further in <xref
target="PDV"></xref> .</t>
</section>
<section anchor="topologies" title="Application to RFC 5117 topologies">
<t>The topologies specified in <xref target="RFC5117"></xref> fall into
two categories. The first category relates to the RTP system model
utilizing multicast and/or unicast. The topologies in this category are
specifically Topo-Point-to-Point, Topo- Multicast, Topo-Translator (both
variants, Topo-Trn-Translator and Topo-Media-Translator, and
combinations of the two), and Topo-Mixer. These topologies use RTP end
systems, RTP mixers and RTP translators defined in the RTP protocol
<xref target="RFC3550"></xref>. For purposes of reporting connection
quality to other RTP systems, RTP mixers and RTP end systems are very
similar. Mixers resynchronize packets and do not relay RTCP reports
received from one cloud towards other cloud(s). Translators do not
resynchronize packets and SHOULD forward certain RTCP reports between
clouds. In this category, the RTP system (end system, mixer or
translator) which originates, terminates or forwards RTCP XR blocks is
expected to handle RTCP, including RTCP XR, according to the RTP
protocol <xref target="RFC3550"></xref>. Provided this expectation is
met, an RTP system using RTCP XR is architecturally no different from an
RTP system of the same class (end system, mixer, or translator) which
does not use RTCP XR. The second category relates to deployed system
models used in many H.323 <xref target="H323"></xref> video conferences.
The topologies in this category are Topo-Video-Switch-MCU and
Topo-RTCP-terminating-MCU. Such topologies based on systems do not
behave according to the RTP protocol <xref target="RFC3550"></xref>.</t>
<t>Considering the MCU and translator are two typical topologies in the
two categories mentioned above, this document will take them as two
typical examples to explain how RTCP XR report works in different
RFC5117 topologies.</t>
<section title="Applicability to MCU">
<t>Topo-Video-Switch-MCU and Topo-RTCP-terminating-MCU, suffer from
the difficulties described in [RFC5117]. These difficulties apply to
systems sending, and expecting to receive, RTCP XR blocks as much as
to systems using other RTCP packet types. For example, a participant
RTP end system may send media to a video switch MCU. If the media
stream is not selected for forwarding by the switch, neither RTCP RR
packets nor RTCP XR blocks referring to the end system's generated
stream will be received at the RTP end system. Strictly the RTP end
system can only conclude that its RTP has been lost in the network,
though an RTP end system complying with the robustness principle of
[RFC1122] should survive with essential functions (i.e.,media
distribution) unimpaired.</t>
</section>
<section anchor="txlat" title="Applicability to Translators">
<t>Section 7.2 of the RTP protocol <xref target="RFC3550"></xref>
describes processing of RTCP by translators. RTCP XR is within the
scope of the recommendations of the RTP protocol <xref
target="RFC3550"></xref>. Some RTCP XR metrics blocks may usefully be
measured at, and reported by, translators. As described in the RTP
protocol <xref target="RFC3550"></xref> this creates a requirement for
the translator to allocate an SSRC for the monitor collocated with
itself so that the monitor may populate the SSRC in the RTCP XR packet
header as packet sender SSRC and send it out(although the translator
is not a Synchronisation Source in the sense of originating RTP media
packets). It must also supply this SSRC and the corresponding CNAME in
RTCP SDES packets.</t>
<t>In RTP sessions where one or more translators generate any RTCP
traffic towards their next-neighbour RTP system, other translators in
the session have a choice as to whether they forward a translator's
RTCP packets. Forwarding may provide additional information to other
RTP systems in the connection but increases RTCP bandwidth and may in
some cases present a security risk. RTP translators may have
forwarding behaviour based on local policy, which might differ between
different interfaces of the same translator.</t>
</section>
</section>
<section title="IANA Considerations">
<t>At the time of writing, the consumption of XR block code points isn't
a major issue. However when XR block codes points is really close to run
out of space, it might be desirable to define new fields encoded as TLV
elements in the XR report block or define one XR block type for
vendor-specific extensions, with an enterprise number included to
identify the vendor making the extension. </t>
</section>
<section title="Security Considerations">
<t>This document focuses on the RTCP reporting extension using RTCP XR
and should not give rise to any new security vulnerabilities beyond
those described in RTCP XRs <xref target="RFC3611"></xref>. However it
also describes the architectural framework to be used for monitoring at
RTP layer. The security issues with monitoring needs to be
considered.</t>
<t>In RTP sessions, a translator may use its own SSRC to send its
monitoring reports towards its next-neighbour RTP system. Other
translators in the session may have a choice as to whether they forward
the translator's RTCP packets. This present a security issue since the
information in the report may be exposed by the other translator to any
malicious node. Therefore if the information is considered as sensitive,
the monitoring report should be encrypted.</t>
<t>Also note that the third party monitors are not visible at the RTP
layer since they do not send any RTCP packets. In order to prevent any
sensitive information leakage, the monitoring from the third party
monitors should be prohibited unless the security is in place to
authenticate them.</t>
</section>
<section title="Acknowledgement">
<t>The authors would also like to thank Colin Perkins, Graeme Gibbs,
Debbie Greenstreet, Keith Drage, Dan Romascanu, Ali C. Begen, Roni Even,
Magnus Westerlundfor their valuable comments and suggestions on the
early version of this document.</t>
</section>
</middle>
<back>
<references title="Informative References">
<reference anchor="RFC1122">
<front>
<title>Requirements for Internet Hosts -- Communication
Layers</title>
<author initials="R." surname="Braden">
<organization>USC/ISI</organization>
</author>
<date month="October" year="1989" />
</front>
<seriesInfo name="RFC" value="1122" />
<format type="TXT" />
</reference>
<reference anchor="RFC3393">
<front>
<title>IP Packet Delay Variation Metric for IP Performance Metrics
(IPPM)</title>
<author fullname="Carlo Demichelis" initials="C."
surname="Demichelis">
<organization>Telecomitalia Lab</organization>
</author>
<date month="November" year="2002" />
</front>
<seriesInfo name="RFC" value="3393" />
<format type="TXT" />
</reference>
<reference anchor="RFC3550">
<front>
<title>RTP: A Transport Protocol for Real-Time Applications</title>
<author fullname="Henning Schulzrinne" initials="H."
surname="Schulzrinne">
<organization>Columbia University</organization>
</author>
<date month="July" year="2003" />
</front>
<seriesInfo name="RFC" value="3550" />
<format type="TXT" />
</reference>
<reference anchor="RFC3611">
<front>
<title>RTP Control Protocol Extended Reports (RTCP XR)</title>
<author fullname="Timur Friedman" initials="T. (Ed)"
surname="Friedman">
<organization>Paris 6</organization>
</author>
<date month="November" year="2003" />
</front>
<seriesInfo name="RFC" value="3611" />
<format type="TXT" />
</reference>
<reference anchor="RFC5117">
<front>
<title>RTP Topologies</title>
<author fullname="Magnus Westerlund" initials="M."
surname="Westerlund">
<organization>Ericsson Research</organization>
</author>
<date month="January" year="2008" />
</front>
<seriesInfo name="RFC" value="5117" />
<format type="TXT" />
</reference>
<reference anchor="RFC5968">
<front>
<title>Guidelines for Extending the RTP Control Protocol
(RTCP)</title>
<author fullname="Joerg Ott" initials="J." surname="Ott">
<organization>Helsinki University of Technology</organization>
</author>
<author fullname="C. Perkins" initials="C." surname="Perkins">
<organization>University of Glasgow</organization>
</author>
<date month="September" year="2010" />
</front>
<seriesInfo name="RFC" value="5968" />
<format type="TXT" />
</reference>
<reference anchor="RFC4585">
<front>
<title>Extended RTP Profile for Real-time Transport Control Protocol
(RTCP)-Based Feedback (RTP/AVPF)</title>
<author fullname="Joerg Ott" initials="J." surname="Ott">
<organization>Helsinki University of Technology</organization>
</author>
<author fullname="S. Wenger" initials="S." surname="Wenger">
<organization>Nokia</organization>
</author>
<date month="July" year="2006" />
</front>
<seriesInfo name="RFC" value="4585" />
<format type="TXT" />
</reference>
<reference anchor="RFC3551">
<front>
<title>Extended RTP Profile for Real-time Transport Control Protocol
(RTCP)-Based Feedback (RTP/AVPF)</title>
<author fullname="H. Schulzrinne" initials="H."
surname="Schulzrinne ">
<organization>Columbia University</organization>
</author>
<author fullname="S. Casner" initials="S." surname="Casner">
<organization>Packet Design</organization>
</author>
<date month="July" year="2003" />
</front>
<seriesInfo name="RFC" value="3551" />
<format type="TXT" />
</reference>
<reference anchor="RFC6035">
<front>
<title>Session Initiation Protocol Event Package for Voice Quality
Reporting</title>
<author fullname="A. Pendleton" initials="A." surname="Pendleton">
<organization>Telchemy Incorporated</organization>
</author>
<author fullname="A. Clark" initials="A." surname="Clark">
<organization>Telchemy Incorporated</organization>
</author>
<author fullname="A. Johnston" initials="A." surname="Johnston">
<organization>Avaya</organization>
</author>
<author fullname="H. Sinnreich" initials="H." surname="Sinnreich">
<organization>Unaffiliated</organization>
</author>
<date month="November" year="2010" />
</front>
<seriesInfo name="RFC" value="6035" />
<format type="TXT" />
</reference>
<reference anchor="RFC5104">
<front>
<title>Session Initiation Protocol Event Package for Voice Quality
Reporting</title>
<author fullname="Stephan Wenger" initials="S." surname="Wenger">
<organization></organization>
</author>
<author fullname="Umesh Chandra" initials="U." surname="Chandra">
<organization></organization>
</author>
<author fullname="Magnus Westerlund" initials="M."
surname="Westerlund">
<organization></organization>
</author>
<author fullname="Bo Burman" initials="B." surname="Burman">
<organization>Unaffiliated</organization>
</author>
<date month="February" year="2008" />
</front>
<seriesInfo name="RFC" value="5104" />
<format type="TXT" />
</reference>
<reference anchor="RFC6332">
<front>
<title>Multicast Acquisition Report Block Type for RTP Control
Protocol (RTCP) Extended Reports (XRs)</title>
<author fullname="Ali Begen" initials="A." surname="Begen">
<organization></organization>
</author>
<author fullname="Eric Friedrich" initials="E." surname="Friedrich">
<organization></organization>
</author>
<date month="July" year="2011" />
</front>
<seriesInfo name="RFC" value="6332" />
<format type="TXT" />
</reference>
<reference anchor="PDV">
<front>
<title>RTCP XR Report Block for Packet Delay Variation Metric
Reporting</title>
<author fullname="Geoff Hunt" initials="G." surname="Hunt">
<organization>BT</organization>
</author>
<date month="September" year="2011" />
</front>
<seriesInfo name="ID" value="draft-ietf-xrblock-rtcp-xr-pdv-00" />
<format type="TXT" />
</reference>
<reference anchor="MI">
<front>
<title>Measurement Identity and information Reporting using SDES
item and XR Block</title>
<author fullname="" initials="" surname="">
<organization>ITU-T</organization>
</author>
<date month="October" year="2011" />
</front>
<format type="TXT" />
</reference>
<reference anchor="MQ">
<front>
<title>RTCP XR Blocks for multimedia quality metric
reporting</title>
<author fullname="Qin Wu" initials="Q." surname="Wu">
<organization></organization>
</author>
<author fullname="Glen Zorn" initials="G." surname="Zorn">
<organization></organization>
</author>
<author fullname="Roland Schott" initials="R." surname="Schott">
<organization></organization>
</author>
<author fullname="Kai Lee" initials="K." surname="Lee">
<organization></organization>
</author>
<date month="May" year="2011" />
</front>
<seriesInfo name="ID"
value="draft-wu-xrblock-rtcp-xr-quality-monitoring-02" />
<format type="TXT" />
</reference>
<reference anchor="G1020">
<front>
<title>ITU-T Rec. G.1020, Performance parameter definitions for
quality of speech and other voiceband applications utilizing IP
networks</title>
<author>
<organization>ITU-T</organization>
</author>
<date month="July" year="2006" />
</front>
<format type="TXT" />
</reference>
<reference anchor="Y1540">
<front>
<title>ITU-T Rec. Y.1540, IP packet transfer and availability
performance parameters</title>
<author fullname="" initials="" surname="">
<organization>ITU-T</organization>
</author>
<date month="November" year="2007" />
</front>
<format type="TXT" />
</reference>
<reference anchor="H323">
<front>
<title>ITU-T Rec. H.323, Packet-based multimedia communications
systems</title>
<author fullname="" initials="" surname="">
<organization>ITU-T</organization>
</author>
<date month="June" year="2006" />
</front>
<format type="TXT" />
</reference>
<reference anchor="ECN">
<front>
<title>Explicit Congestion Notification (ECN) for RTP over
UDP</title>
<author fullname="Magnus Westerlund" initials="M."
surname="Westerlund">
<organization>Ericsson</organization>
</author>
<author fullname="Ingemar Johansson" initials="I."
surname="Johansson">
<organization>Ericsson</organization>
</author>
<author fullname="Colin Perkins" initials="C." surname="Perkins">
<organization></organization>
</author>
<author fullname="Piers O'Hanlon" initials="P." surname="O'Hanlon">
<organization></organization>
</author>
<author fullname="Ken Carlberg" initials="K." surname="Carlberg">
<organization></organization>
</author>
<date month="July" year="2011" />
</front>
<seriesInfo name="ID" value="draft-ietf-avtcore-ecn-for-rtp-04" />
<format type="TXT" />
</reference>
</references>
<section title="Change Log">
<t>Note to the RFC-Editor: please remove this section prior to
publication as an RFC.</t>
<section title="draft-ietf-avtcore-monarch-00">
<t>The following are the major changes compared to
draft-hunt-avtcore-monarch-02: <list style="symbols">
<t>Move Geoff Hunt and Philip Arden to acknowledgement
section.</t>
</list></t>
</section>
<section title="draft-ietf-avtcore-monarch-01">
<t>The following are the major changes compared to 00: <list
style="symbols">
<t>Restructure the document by merging section 4 into section
3.</t>
<t>Remove section 4.1,section 5 that is out of scope of this
document.</t>
<t>Remove the last bullet in section 6 and section 7.3 based on
conclusion of last meeting.</t>
<t>Update figure 1 and related text in section 3 according to the
monitor definition in RFC3550.</t>
<t>Revise section 9 to address monitor declaration issue.</t>
<t>Merge the first two bullet in section 6.</t>
<t>Add one new bullet to discuss metric block association in
section 6.</t>
</list></t>
</section>
<section title="draft-ietf-avtcore-monarch-02">
<t>The following are the major changes compared to 01: <list
style="symbols">
<t>Deleting first paragraph of Section 1.</t>
<t>Deleting Section 3.1, since the interaction with the management
application is out of scope of this draft.</t>
<t>Separate identity information correlation from section 5.2 as
new section 5.3.</t>
<t>Remove figure 2 and related text from section 5.2.</t>
<t>Editorial changes in the section 4 and the first paragraph of
section 7.</t>
</list></t>
</section>
<section title="draft-ietf-avtcore-monarch-03">
<t>The following are the major changes compared to 02: <list
style="symbols">
<t>Update bullet 2 in section 4 to explain the ill-effect of
Identity Information duplication.</t>
<t>Update bullet 3 in section 4 to explain why Correlating RTCP XR
with the non-RTP data is needed.</t>
<t>Update section 5.2 to focus on how to reduce the identity
information repetition</t>
<t>Update section 5.3 to explain how to correlate identity
information with the non-RTP data</t>
</list></t>
</section>
<section title="draft-ietf-avtcore-monarch-04">
<t>The following are the major changes compared to 03: <list
style="symbols">
<t>Update section 5.2 to clarify using SDES packet to carry
correlation information.</t>
<t>Remove section 5.3 since additional identity information goes
to SDES packet and using SSRC to identify each block is standard
RTP feature.</t>
<t>Swap the last two paragraphs in the section 4 since identity
information duplication can not been 100% avoided.</t>
<t>Other editorial changes.</t>
</list></t>
</section>
<section title="draft-ietf-avtcore-monarch-05">
<t>The following are the major changes compared to 04: <list
style="symbols">
<t>Replace "chunk" with "new SDES item".</t>
<t>Add texts in security section to discussion potential security
issues.</t>
<t>Add new sub-section 5.3 to discuss Reducing Measurement
information repetition.</t>
<t>Other editorial changes.</t>
</list></t>
</section>
</section>
</back>
</rfc>
| PAFTECH AB 2003-2026 | 2026-04-24 13:12:12 |