One document matched: draft-ietf-avtcore-monarch-02.xml
<?xml version="1.0" encoding="UTF-8"?>
<!-- edited with XMLSPY v5 rel. 3 U (http://www.xmlspy.com)
by Daniel M Kohn (private) -->
<!DOCTYPE rfc SYSTEM "rfc2629.dtd" [
<!ENTITY rfc2119 PUBLIC "" "http://xml.resource.org/public/rfc/bibxml/reference.RFC.2119.xml">
]>
<rfc category="info" docName="draft-ietf-avtcore-monarch-02.txt"
ipr="trust200902">
<?xml-stylesheet type='text/xsl' href='rfc2629.xslt' ?>
<?rfc toc="yes" ?>
<?rfc symrefs="yes" ?>
<?rfc sortrefs="yes"?>
<?rfc iprnotified="no" ?>
<?rfc strict="yes" ?>
<front>
<title abbrev="RTP Monitoring Architectures">Monitoring Architectures for
RTP</title>
<author fullname="Qin Wu" initials="Q." role="editor" surname="Wu">
<organization>Huawei</organization>
<address>
<postal>
<street>101 Software Avenue, Yuhua District</street>
<city>Nanjing</city>
<region>Jiangsu</region>
<code>210012</code>
<country>China</country>
</postal>
<email>sunseawq@huawei.com</email>
</address>
</author>
<author fullname="Geoff Hunt" initials="G." surname="Hunt">
<organization>Unaffiliated </organization>
<address>
<email>r.geoff.hunt@gmail.com</email>
</address>
</author>
<author fullname="Philip Arden" initials="P.J." surname="Arden">
<organization abbrev="BT">BT</organization>
<address>
<postal>
<street>Orion 3/7 PP4</street>
<street>Adastral Park</street>
<street>Martlesham Heath</street>
<city>Ipswich</city>
<region>Suffolk</region>
<code>IP5 3RE</code>
<country>United Kingdom</country>
</postal>
<phone>+44 1473 644192</phone>
<email>philip.arden@bt.com</email>
</address>
</author>
<date month="May" year="2011" />
<area>Real-time Applications and Infrastructure Area</area>
<workgroup>Audio/Video Transport Working Group</workgroup>
<keyword>RFC</keyword>
<keyword>Request for Comments</keyword>
<keyword>I-D</keyword>
<keyword>Internet-Draft</keyword>
<keyword>Real Time Control Protocol</keyword>
<abstract>
<t>This memo proposes an architecture for extending RTCP with a new RTCP
XR (RFC3611) block type to report new metrics regarding media
transmission or reception quality, as proposed in RFC5968. This memo
suggests that a new block should contain a single metric or a small
number of metrics relevant to a single parameter of interest or concern,
rather than containing a number of metrics which attempt to provide full
coverage of all those parameters of concern to a specific application.
Applications may then "mix and match" to create a set of blocks which
covers their set of concerns. Where possible, a specific block should be
designed to be re-usable across more than one application, for example,
for all of voice, streaming audio and video.</t>
</abstract>
</front>
<middle>
<section anchor="intro" title="Introduction">
<t>As more users and subscribers rely on real time application services,
uncertainties in the performance and availability of these services are
driving the need to support new standard methods for gathering
performance metrics from RTP applications. These rapidly emerging
standards, such as RTCP XR <xref target="RFC3611"></xref>and other RTCP
extension to Sender Reports(SR), Receiver Reports (RR) <xref
target="RFC3550"></xref>are being developed for the purpose of
collecting and reporting performance metrics from endpoint devices that
can be used to correlate the metrics, provide end to end service
visibility and measure and monitor QoE.</t>
<t>However the proliferation of RTP/RTCP specific metrics for transport
and application quality monitoring has been identified as a potential
problem for RTP/RTCP interoperability, which attempt to provide full
coverage of all those parameters of concern to a specific application.
Since different applications layered on RTP may have some monitoring
requirements in common, therefore these metrics should be satisfied by a
common design.</t>
<t>The objective of this document is to define an extensible RTP
monitoring framework to provide a small number of re-usable QoS/QoE
metrics which facilitate reduced implementation costs and help maximize
inter-operability. <xref target="RFC5968"></xref> has stated that, where
RTCP is to be extended with a new metric, the preferred mechanism is by
the addition of a new RTCP XR <xref target="RFC3611"></xref> block. This
memo assumes that any requirement for a new metric to be transported in
RTCP will use a new RTCP XR block.</t>
</section>
<section title="Requirements notation">
<t>This memo is informative and as such contains no normative
requirements.</t>
<t>In addition, the following terms are defined:</t>
<t><list style="hanging">
<t hangText="Transport level metrics"><vspace blankLines="1" />A set
of metrics which characterise the three transport impairments of
packet loss, packet delay, and packet delay variation. These metrics
should be usable by any application which uses RTP transport.<vspace
blankLines="1" /></t>
<t hangText="Application level metrics"><vspace
blankLines="1" />Metrics relating to QoE related parameters. These
metrics are measured at the application level and focus on quality
of content rather than network parameters.<vspace
blankLines="1" /></t>
<t hangText="End System metrics"><vspace blankLines="1" />Metrics
relating to the way a terminal deals with transport impairments
affecting the incident RTP stream. These may include de-jitter
buffering, packet loss concealment, and the use of redundant streams
(if any) for correction of error or loss.<vspace
blankLines="1" /></t>
</list></t>
</section>
<section title="RTP monitoring architecture">
<t>The RTP monitoring architecture comprises the following two key
functional components shown below:<list style="symbols">
<t>Monitor</t>
<t>Metric Block Structure</t>
</list></t>
<t>Monitor is a functional component defined in RFC3550 that acts as a
source of information gathered for monitoring purposes. It may also
collect statistics from multiple source, stores such information
reported by RTCP XR or other RTCP extension appropriately as base metric
or calculates composite metric. According to the definition of monitor
in RFC3550, the end system that source RTP streams, an
intermediate-system that forwards RTP packets to End-devices or a third
party that does not participate RTP session (i.e., the third party
monitor depicted in figure 1) can be envisioned to act as Monitor within
the RTP monitoring architecture.</t>
<t>The Metric Block exposes real time Application Quality information in
the appropriate report block format to monitor within the RTP monitoring
architecture. Both the RTCP or RTCP XR can be extended to convey such
information. The details on transport protocol for metric block is
described in <xref target="sec2"></xref>.</t>
<figure anchor="ARCH" title="RTP Monitoring Architecture">
<artwork>
|---------------+
| Management |
+-------------------+ | System |
| RTP Sender | | +----------+ |
| +-----------+ | | | | |
---------------->| Monitor |---------5------->| Monitor | |
| | | | | | | | |
| | +-----------+ | | +----\-----+ |
| |+-----------------+| | | |
| ||Application || --------|-------+
| ||-Streaming video || |
| |---------|-VOIP || 5
| | ||-Video conference|| |
| | ||-Telepresence || +---------------+
| | ||-Ad insertion || | Third Party |
5 | |+-----------------+| | Monitor |
| | +-------------------+ +---------------+
| 1
| | +Intermediate------------+ |-------------- ---- ----+
| | | RTP System Report Block | RTP Receiver >--4-| |
| | | +---------- transported over| +-----------+ | |
| | | | RTCP extension | | Monitor |<-- |
|------------- Monitor |<--------5------|----| |<------|
| | | | Report Block +----/------+ ||
| | +----------+ transported over | ||
| | RTCP XR | |2 ||
| | +-----------------+ | | +-------/---------+ ||
| | |Application | | | |Application | ||
| | |-Streaming video | | | |-Streaming video | ||
| | |-VOIP | | 1 | |-VOIP | 3|
---->-Video conference|--------------->|-Video conference ||
| |-Telepresence | | | |-Telepresence | ||
| |-Ad insertion | | | |-Ad insertion | ||
| +-----------------+ | | +-----------------+ ||
| +-----------------+ | | +-----------------+ ||
| |Transport | | | |Transport | ||
| |-IP/UDP/RTP | | | |-IP/UDP/RTP >---||
| |-IP/TCP/RTP | | | | -IP/TCP/RTP | |
| |-IP/TCP/RTSP/RTP | | | |-IP/TCP/RTSP/RTP | |
| +-----------------+ | | +-----------------+ |
+------------------------+ +------------------------+
</artwork>
</figure>
<t><list style="numbers">
<t>RTP communication between real time applications</t>
<t>Application level metrics</t>
<t>Transport level metrics</t>
<t>End System metrics</t>
<t>Reporting Session- metrics transmitted over specified
interfaces</t>
</list></t>
<section anchor="sec2"
title="RTCP Metric Block Report and associated parameters">
<t>The basic RTCP Reception Report (RR) conveys reception statistics
in metric block report format for multiple RTP media streams including
<list style="symbols">
<t>transport level statistics</t>
<t>the fraction of packet lost since the last report</t>
<t>the cumulative number of packets lost</t>
<t>the highest sequence number received</t>
<t>an estimate of the inter-arrival jitter</t>
<t>and information to allow senders to calculate the network round
trip time.</t>
</list>The RTCP XRs <xref target="RFC3611"></xref> supplement the
existing RTCP packets and provide more detailed feedback on reception
quality in several categories:<list style="symbols">
<t>Loss and duplicate RLE reports</t>
<t>Packet-receipt times reports</t>
<t>Round-trip time reports</t>
<t>Statistics Summary Reports</t>
</list></t>
<t>There are also various other scenarios in which it is desirable to
send RTCP Metric reports more frequently. The Audio/Video Profile with
Feedback <xref target="RFC4585"></xref>extends the standard A/V
Profile<xref target="RFC3551"></xref> to allow RTCP reports to be sent
early provided RTCP bandwidth allocation is respected. There are four
use cases but are not limited to:<list style="symbols">
<t hangText="Retransmission">RTCP NACK is used to provide feedback
on the RTP sequence number of the lost packets.</t>
<t hangText="Rapid acquisition of multicast sessions">RTCP XR is
extended to provide feedback on multicast acquisition statistics
information and parameters.</t>
<t hangText="Codec Control">RTCP is extended to convey requests
for full intra-coded frames or select the reference picture, and
signalchanges in the desired temporal/spatial trade-off and
maximum media bit rate.</t>
<t hangText="Congestion Notification">RTCP or RTCP XR is extended
to provide feedback on ECN statistics information.</t>
</list></t>
</section>
</section>
<section title="Issues with reporting metric block using RTCP XR extension">
<t>Issues that have come up in the past with reporting metric block
using RTCP XR extensions include (but are probably not limited to) the
following:<list style="symbols">
<t>Using large block. A single report block or metric is designed to
contain a large number of parameters in different classes for a
specific application. For example, RFC 3611 <xref
target="RFC3611"></xref> defines seven report block formats for
network management and quality monitoring. However some of these
block types defined in <xref target="RFC3611"></xref> are only
specifically designed for conveying multicast inference of network
characteristics(MINC) or voice over IP (VoIP) monitoring. However
different applications layered on RTP may have some monitoring
requirements in common, design large block only for specific
applications may increase implementation cost and minimize
interoperability.</t>
<t>Identity Information duplication. There may be situations where
an RTCP XR packet containing more than two metrics blocks, reports
on the same streams from the same source. In such case, each metric
block should have the same measurement identity, if each metric
block carry such duplicated data for the measurement,it leads to
redundant information in this design since equivalent information is
provided multiple times, once in *every* identification packet.
Though this ensures immunity to packet loss, the design bring more
complexity and the overhead is not completely trivial.</t>
<t>Metric Blocks association. There may be situations where an RTCP
XR packet containing four metrics blocks, reports on streams from
two sources. In such case, two identity blocks need to be added into
the RTCP XR packet to correlate two sources if identity information
is allowed separate from each metric block as one independent block.
However how to associate identity block with relevant metric block
data or other identity data is a problem, e.g., all identity blocks
are following all the metric block or vice versa make one receiving
RTCP XR packet hard to distinguish from which metric block belong to
which source.</t>
</list></t>
</section>
<section title=" Guideline for reporting block format using RTCP XR">
<section anchor="smallblock" title="Using small blocks">
<t>Different applications using RTP for media transport certainly have
differing requirements for metrics transported in RTCP to support
their operation. For many applications, the basic metrics for
transport impairments provided in RTCP SR and RR packets <xref
target="RFC3550"></xref> (together with source identification provided
in RTCP SDES packets) are sufficient. For other applications
additional metrics may be required or at least sufficiently useful to
justify the overheads, both of processing in endpoints and of
increased session bandwidth. For example an IPTV application using
Forward Error Correction (FEC) might use either a metric of
post-repair loss or a metric giving detailed information about
pre-repair loss bursts to optimise payload bandwidth and the strength
of FEC required for changing network conditions. However there are
many metrics available. It is likely that different applications or
classes of applications will wish to use different metrics. Any one
application is likely to require metrics for more than one parameter
but if this is the case, different applications will almost certainly
require different combinations of metrics. If larger blocks are
defined containing multiple metrics to address the needs of each
application, it becomes likely that many different such larger blocks
are defined, which becomes a danger to interoperability.</t>
<t>To avoid this pitfall, this memo proposes the use of small RTCP XR
metrics blocks each containing a very small number of individual
metrics characterizing only one parameter of interest to an
application running over RTP. For example, at the RTP transport layer,
the parameter of interest might be packet delay variation, and
specifically the metric "IPDV" defined by <xref
target="Y1540"></xref>. See <xref target="example"></xref> for
architectural considerations for a metrics block, using as an example
a metrics block to report packet delay variation.</t>
</section>
<section anchor="identity" title="Sharing the identity information">
<t>Any measurement must be identified. However if metrics are
delivered in small blocks there is a danger of inefficiency arising
from repeating this information in a number of metrics blocks within
the same RTCP packet, in cases where the same identification
information applies to multiple metrics blocks.</t>
<t>An instance of a metric must be identified using information which
is likely to include most of the following:</t>
<t><list style="symbols">
<t>the node at which it was measured,</t>
<t>the source of the measured stream (for example, its CNAME),</t>
<t>the SSRC of the measured stream,</t>
<t>the sequence number of the first packet of the RTP session,</t>
<t>the extended sequence numbers of the first packet of the
current measurement interval, and the last packet included in the
measurement,</t>
<t>the duration of the most recent measurement interval and</t>
<t>the duration of the interval applicable to cumulative
measurements (which may be the duration of the RTP session to
date).</t>
</list></t>
<t>Note that this set of information may overlap with, but is more
extensive than, that in the union of similar information in RTCP RR
packets. However we can not assume that RR information is always
present when XR is sent, since they may have different measurement
intervals. Also the reason for the additional information carried in
the XR is the perceived difficulty of "locating" the *start* of the
RTP session (sequence number of 1st packet, duration of interval
applicable to cumulative measurements) using only RR. However when an
RTCP XR packet containing more than two metrics blocks, reporting on
the same streams from the same source, each metric block should have
the same measurement identity, if each metric block carry the
duplicated data for the measurement identity ,it leads to redundant
information in this design since equivalent information is provided
multiple times, once in *every* identification packet. Though this
ensures immunity to packet loss, the design bring more complexity and
the overhead is not completely trivial.</t>
<t>This section proposes an approach to minimise the inefficiency of
providing this identification information, assuming that an
architecture based on small blocks means that a typical RTCP packet
will contain more than one metrics block needing the same
identification. The choice of identification information to be
provided is discussed in <xref target="IDENTITY"></xref>. The approach
is to define a stand-alone block containing only identification
information within the scope of the containing RTCP XR packet. The
"containing RTCP XR packet" is defined here as the RTCP XR header with
PT=XR=207 defined in Section 2 of <xref target="RFC3611"></xref> and
the associated payload defined by the length field of this RTCP XR
header. The RTCP XR header itself includes the SSRC of the node at
which all of the contained metrics were measured, hence this SSRC need
not be repeated in the stand-alone identification block. A single
containing RTCP XR packet may contain multiple identification blocks
limited by the range of the tag field. Typically there will be one
identification block per monitored source SSRC, but the use of more
than one identification block for a single monitored source SSRC
within a single containing RTCP XR packet is not ruled out. In order
to reduce overhead of the payload, This stand-alone block need only be
exchanged occasionally, for example sent once at the start of a
session.</t>
</section>
<section title="Correlating identity information with the data">
<t>This section proposes an approach to facilitate the correlation of
the metrics report blocks with other session-related data or identity
data, i.e., using correlation tag to associate identity information
with the data.</t>
<t>For example, there will be zero or more metrics blocks dependent on
the same set of identity information. The dependence of an instance of
a metrics block on such identity information can be established by the
metrics block's having the same numeric value of the tag field.</t>
<t>Also there will be an identity data dependent on the same set of
identity information. If the set of identity information is formed as
an independent block, then the dependence of an instance of a identity
block on identity data can be established by the identity block’s
having the tag field to indicate the relationship between identity
blocks and a specific application. An example use case is for an
endpoint may convey a call identifier or a global call identifier
associated with identity information. A flow measurement tool that is
not call-aware can then forward the metric reports along with this
correlation tag to network management. Network management can then use
this tag to correlate this report with other diagnostic information
such as call detail records.</t>
</section>
</section>
<section anchor="example" title="An example of a metric block">
<t>This section uses the example of an existing proposed metrics block
to illustrate the application of the principles set out in <xref
target="smallblock"></xref>.</t>
<t>The example <xref target="PDV"></xref> (work in progress) is a block
to convey information about packet delay variation (PDV) only,
consistent with the principle that a metrics block should address only
one parameter of interest. One simple metric of PDV is available in the
RTCP RR packet as the "jit" field. There are other PDV metrics which may
be more useful to certain applications. Two such metrics are the IPDV
metric (<xref target="Y1540"></xref>, <xref target="RFC3393"></xref>)
and the MAPDV2 metric <xref target="G1020"></xref>. Use of these metrics
is consistent with the principle in Section 5 of <xref
target="RFC5968"></xref> that metrics should usually be defined
elsewhere, so that RTCP standards define only the transport of the
metric rather than its nature. The purpose of this section is to
illustrate the architecture using the example of <xref
target="PDV"></xref> (work in progress) rather than to document the
design of the PDV metrics block or to provide a tutorial on PDV in
general.</t>
<t>Given the availability of at least three metrics for PDV, there are
design options for the allocation of metrics to RTCP XR blocks:</t>
<t><list style="symbols">
<t>provide an RTCP XR block per metric</t>
<t>provide a single RTCP XR block which contains all three
metrics</t>
<t>provide a single RTCP block to convey any one of the three
metrics, together with a identifier to inform the receiving RTP
system of the specific metric being conveyed</t>
</list></t>
<t>In choosing between these options, extensibility is important,
because additional metrics of PDV may well be standardized and require
inclusion in this framework. The first option is extensible but only by
use of additional RTCP XR blocks, which may consume the limited
namespace for RTCP XR blocks at an unacceptable rate. The second option
is not extensible, so could be rejected on that basis, but in any case a
single application is quite unlikely to require transport of more than
one metric for PDV. Hence the third option was chosen. This implies the
creation of a subsidiary namespace to enumerate the PDV metrics which
may be transported by this block, as discussed further in <xref
target="PDV"></xref> (work in progress).</t>
</section>
<section anchor="topologies" title="Application to RFC 5117 topologies">
<t>The topologies specified in <xref target="RFC5117"></xref> fall into
two categories. The first category relates to the RTP system model
utilizing multicast and/or unicast. The topologies in this category are
specifically Topo-Point-to-Point, Topo- Multicast, Topo-Translator (both
variants, Topo-Trn-Translator and Topo-Media-Translator, and
combinations of the two), and Topo-Mixer. These topologies use RTP end
systems, RTP mixers and RTP translators defined in <xref
target="RFC3550"></xref>. For purposes of reporting connection quality
to other RTP systems, RTP mixers and RTP end systems are very similar.
Mixers resynchronize audio packets and do not relay RTCP reports
received from one cloud towards other cloud(s). Translators do not
resynchronize packets and SHOULD forward certain RTCP reports between
clouds. In this category, the RTP system (end system, mixer or
translator) which originates, terminates or forwards RTCP XR blocks is
expected to handle RTCP, including RTCP XR, according to <xref
target="RFC3550"></xref>. Provided this expectation is met, an RTP
system using RTCP XR is architecturally no different from an RTP system
of the same class (end system, mixer, or translator) which does not use
RTCP XR. The second category relates to deployed system models used in
many H.323 <xref target="H323"></xref> video conferences. The topologies
in this category are Topo-Video-Switch-MCU and
Topo-RTCP-terminating-MCU. Such topologies based on systems do not
behave according to <xref target="RFC3550"></xref>. </t>
<section title="Applicability to MCU">
<t>Topo-Video-Switch-MCU and Topo-RTCP-terminating-MCU, suffer from
the difficulties described in [RFC5117]. These difficulties apply to
systems sending, and expecting to receive, RTCP XR blocks as much as
to systems using other RTCP packet types. For example, a participant
RTP end system may send media to a video switch MCU. If the media
stream is not selected for forwarding by the switch, neither RTCP RR
packets nor RTCP XR blocks referring to the end system's generated
stream will be received at the RTP end system. Strictly the RTP end
system can only conclude that its RTP has been lost in the network,
though an RTP end system complying with the robustness principle of
[RFC1122] should survive with essential functions unimpaired.</t>
</section>
<section anchor="txlat" title="Applicability to Translators">
<t>Section 7.2 of <xref target="RFC3550"></xref> describes processing
of RTCP by translators. RTCP XR is within the scope of the
recommendations of <xref target="RFC3550"></xref>. Some RTCP XR
metrics blocks may usefully be measured at, and reported by,
translators. As described in <xref target="RFC3550"></xref> this
creates a requirement for the translator to allocate an SSRC for the
monitor within itself so that it may populate the SSRC in the RTCP XR
packet header (although the translator is not a Synchronisation Source
in the sense of originating RTP media packets). It must also supply
this SSRC and the corresponding CNAME in RTCP SDES packets.</t>
<t>In RTP sessions where one or more translators generate any RTCP
traffic towards their next-neighbour RTP system, other translators in
the session have a choice as to whether they forward a translator's
RTCP packets. Forwarding may provide additional information to other
RTP systems in the connection but increases RTCP bandwidth and may in
some cases present a security risk. RTP translators may have
forwarding behaviour based on local policy, which might differ between
different interfaces of the same translator.</t>
<t>For bidirectional unicast, an RTP system may usually detect RTCP XR
from a translator by noting that the sending SSRC is not present in
any RTP media packet. However even for bidirectional unicast there is
a possibility of a source sending RTCP XR before it has sent any RTP
media (leading to transient mis-categorisation of an RTP end system or
RTP mixer as a translator), and for multicast sessions - or
unidirectional/streaming unicast - there is a possibility of a
receive-only end system being permanently mis-categorised as a
translator sending XR report, i.e.,monitor collocated with transaltor.
Hence it is desirable for a translator that sends XR to have a way to
declare itself explicitly.</t>
</section>
</section>
<section title="IANA Considerations">
<t>None.</t>
</section>
<section title="Security Considerations">
<t>This document itself contains no normative text and hence should not
give rise to any new security considerations, to be confirmed.</t>
</section>
<section title="Acknowledgement">
<t>The authors would also like to thank Colin Perkins, Graeme Gibbs,
Debbie Greenstreet, Keith Drage,Dan Romascanu, Ali C. Begen, Roni Even
for their valuable comments and suggestions on the early version of this
document.</t>
</section>
</middle>
<back>
<references title="Informative References">
<reference anchor="RFC1122">
<front>
<title>Requirements for Internet Hosts -- Communication
Layers</title>
<author initials="R." surname="Braden">
<organization>USC/ISI</organization>
</author>
<date month="October" year="1989" />
</front>
<seriesInfo name="RFC" value="1122" />
<format type="TXT" />
</reference>
<reference anchor="RFC3393">
<front>
<title>IP Packet Delay Variation Metric for IP Performance Metrics
(IPPM)</title>
<author fullname="Carlo Demichelis" initials="C."
surname="Demichelis">
<organization>Telecomitalia Lab</organization>
</author>
<date month="November" year="2002" />
</front>
<seriesInfo name="RFC" value="3393" />
<format type="TXT" />
</reference>
<reference anchor="RFC3550">
<front>
<title>RTP: A Transport Protocol for Real-Time Applications</title>
<author fullname="Henning Schulzrinne" initials="H."
surname="Schulzrinne">
<organization>Columbia University</organization>
</author>
<date month="July" year="2003" />
</front>
<seriesInfo name="RFC" value="3550" />
<format type="TXT" />
</reference>
<reference anchor="RFC3611">
<front>
<title>RTP Control Protocol Extended Reports (RTCP XR)</title>
<author fullname="Timur Friedman" initials="T. (Ed)"
surname="Friedman">
<organization>Paris 6</organization>
</author>
<date month="November" year="2003" />
</front>
<seriesInfo name="RFC" value="3611" />
<format type="TXT" />
</reference>
<reference anchor="RFC5117">
<front>
<title>RTP Topologies</title>
<author fullname="Magnus Westerlund" initials="M."
surname="Westerlund">
<organization>Ericsson Research</organization>
</author>
<date month="January" year="2008" />
</front>
<seriesInfo name="RFC" value="5117" />
<format type="TXT" />
</reference>
<reference anchor="RFC5968">
<front>
<title>Guidelines for Extending the RTP Control Protocol
(RTCP)</title>
<author fullname="Joerg Ott" initials="J." surname="Ott">
<organization>Helsinki University of Technology</organization>
</author>
<author fullname="C. Perkins" initials="C." surname="Perkins">
<organization>University of Glasgow</organization>
</author>
<date month="September" year="2010" />
</front>
<seriesInfo name="RFC" value="5968" />
<format type="TXT" />
</reference>
<reference anchor="RFC4585">
<front>
<title>Extended RTP Profile for Real-time Transport Control Protocol
(RTCP)-Based Feedback (RTP/AVPF)</title>
<author fullname="Joerg Ott" initials="J." surname="Ott">
<organization>Helsinki University of Technology</organization>
</author>
<author fullname="S. Wenger" initials="S." surname="Wenger">
<organization>Nokia</organization>
</author>
<date month="July" year="2006" />
</front>
<seriesInfo name="RFC" value="4585" />
<format type="TXT" />
</reference>
<reference anchor="RFC3551">
<front>
<title>Extended RTP Profile for Real-time Transport Control Protocol
(RTCP)-Based Feedback (RTP/AVPF)</title>
<author fullname="H. Schulzrinne" initials="H."
surname="Schulzrinne ">
<organization>Columbia University</organization>
</author>
<author fullname="S. Casner" initials="S." surname="Casner">
<organization>Packet Design</organization>
</author>
<date month="July" year="2003" />
</front>
<seriesInfo name="RFC" value="3551" />
<format type="TXT" />
</reference>
<reference anchor="IDENTITY">
<front>
<title>RTCP XR Report Block for Measurement Identity</title>
<author fullname="Geoff Hunt" initials="G." surname="Hunt">
<organization>BT</organization>
</author>
<date month="May" year="2009" />
</front>
<seriesInfo name="ID" value="draft-ietf-avt-rtcp-xr-meas-identity-02" />
<format type="TXT" />
</reference>
<reference anchor="PDV">
<front>
<title>RTCP XR Report Block for Packet Delay Variation Metric
Reporting</title>
<author fullname="Geoff Hunt" initials="G." surname="Hunt">
<organization>BT</organization>
</author>
<date month="May" year="2009" />
</front>
<seriesInfo name="ID" value="draft-ietf-avt-rtcp-xr-pdv-03" />
<format type="TXT" />
</reference>
<reference anchor="G1020">
<front>
<title>ITU-T Rec. G.1020, Performance parameter definitions for
quality of speech and other voiceband applications utilizing IP
networks</title>
<author>
<organization>ITU-T</organization>
</author>
<date month="July" year="2006" />
</front>
<format type="TXT" />
</reference>
<reference anchor="Y1540">
<front>
<title>ITU-T Rec. Y.1540, IP packet transfer and availability
performance parameters</title>
<author fullname="" initials="" surname="">
<organization>ITU-T</organization>
</author>
<date month="November" year="2007" />
</front>
<format type="TXT" />
</reference>
<reference anchor="H323">
<front>
<title>ITU-T Rec. H.323, Packet-based multimedia communications
systems</title>
<author fullname="" initials="" surname="">
<organization>ITU-T</organization>
</author>
<date month="June" year="2006" />
</front>
<format type="TXT" />
</reference>
</references>
<section title="Change Log">
<t>Note to the RFC-Editor: please remove this section prior to
publication as an RFC.</t>
<section title="draft-ietf-avtcore-monarch-00">
<t>The following are the major changes compared to
draft-hunt-avtcore-monarch-02: <list style="symbols">
<t>Move Geoff Hunt and Philip Arden to acknowledgement
section.</t>
</list></t>
</section>
<section title="draft-ietf-avtcore-monarch-01">
<t>The following are the major changes compared to 00: <list
style="symbols">
<t>Restructure the document by merging section 4 into section
3.</t>
<t>Remove section 4.1,section 5 that is out of scope of this
document.</t>
<t>Remove the last bullet in section 6 and section 7.3 based on
conclusion of last meeting.</t>
<t>Update figure 1 and related text in section 3 according to the
monitor definition in RFC3550.</t>
<t>Revise section 9 to address monitor declaration issue.</t>
<t>Merge the first two bullet in section 6.</t>
<t>Add one new bullet to discuss metric block association in
section 6.</t>
</list></t>
</section>
<section title="draft-ietf-avtcore-monarch-02">
<t>The following are the major changes compared to 01: <list
style="symbols">
<t>Deleting first paragraph of Section 1.</t>
<t>Deleting Section 3.1, since the interaction with the management
application is out of scope of this draft.</t>
<t>Separeate identity information correlation from section 5.2 as
new section 5.3.</t>
<t>Remove figure 2 and related text from section 5.2.</t>
<t>Editorial changes in the section 4 and the first paragraph of
section 7.</t>
</list></t>
</section>
</section>
</back>
</rfc>
| PAFTECH AB 2003-2026 | 2026-04-24 00:57:45 |