One document matched: draft-hares-i2rs-auth-trans-04.txt
Differences from draft-hares-i2rs-auth-trans-03.txt
I2RS working group S. Hares
Internet-Draft Huawei
Intended status: Standards Track D. Migault
Expires: January 4, 2016 J. Halpern
Ericsson
July 3, 2015
I2RS Security Related Requirements
draft-hares-i2rs-auth-trans-04
Abstract
This presents security-related requirements for the I2RS protocol for
mutual authentication, transport protocols, data transfer and
transactions.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on January 4, 2016.
Copyright Notice
Copyright (c) 2015 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Hares, et al. Expires January 4, 2016 [Page 1]
Internet-Draft I2RS Security Requirements July 2015
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Definitions . . . . . . . . . . . . . . . . . . . . . . . 2
2. Security-Related Requirements . . . . . . . . . . . . . . . . 4
2.1. Mutual authentication of I2RS client and I2RS Agent . . . 4
2.2. Transport Requirements Based on Mutual Authentication . . 5
2.3. Data Confidentiality Requirements . . . . . . . . . . . . 5
2.4. Message Integrity Requirements . . . . . . . . . . . . . 5
2.4.1. Handling Multiple Messages . . . . . . . . . . . . . 6
2.5. Role-Based Data Model Security . . . . . . . . . . . . . 6
3. Acknowledgement . . . . . . . . . . . . . . . . . . . . . . . 7
4. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 7
5. Security Considerations . . . . . . . . . . . . . . . . . . . 7
6. References . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.1. Normative References . . . . . . . . . . . . . . . . . . 8
6.2. Informative References . . . . . . . . . . . . . . . . . 8
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 9
1. Introduction
The Interface to the Routing System (I2RS) provides read and write
access to information and state within the routing process. The I2RS
client interacts with one or more I2RS agents to collect information
from network routing systems.
This document describes the requirements for the I2RS protocol in the
security-related areas of mutual authentication of the I2RS client
and agent, the transport protocol carrying the I2RS protocol
messages, and the atomicity of the transactions. These requirements
were initially described in the [I-D.ietf-i2rs-architecture]
document.
[I-D.haas-i2rs-ephemeral-state-reqs] discusses I2RS roles-based write
conflict resolution in the ephemeral data store using the I2RS Client
Identity, I2RS Secondary Identity and priority. The draft
[I-D.ietf-i2rs-traceability] describes the traceability framework and
its requirements for I2RS. The draft
[I-D.ietf-i2rs-pub-sub-requirements] describes the requirements for
I2RS to be able to publish information or have a remote client
subscribe to an information data stream.
1.1. Definitions
This document utilizes the definitions found in the following drafts:
[RFC4949], and [I-D.ietf-i2rs-architecture]
Specifically, this document utilizes the following definitions:
Hares, et al. Expires January 4, 2016 [Page 2]
Internet-Draft I2RS Security Requirements July 2015
Authentication
[RFC4949] describes authentication as the process of verifying
(i.e., establishing the truth of) an attribute value claimed by or
for a system entity or system resource. Authentication has two
steps: identify and verify.
Data Confidentiality
[RFC4949] describes data confidentiality as having two properties:
a) data is not disclosed to system entities unless they have been
authorized to know, and b) data is not disclosed to unauthorized
individuals, entities or processes. The key point is that
confidentiality implies that the originator has the ability to
authorize where the information goes. Confidentiality is
important for both read and write scope of the data.
Data Privacy
[RFC4949] describes data privacy as a synonym for data
confidentiality. This I2RS document will utilize data privacy as
a synonym for data confidentiality.
Mutual Authentication
[RFC4949] implies that mutual authentication exists between two
interacting system entities. Mutual authentication in I2RS
implies that both sides move from a state of mutual suspicion to
mutually authenticated communication afte each system has been
identified and validated by its peer system.
Security audit trail
[RFC4949] (page 254) describes a security audit trail as a
chronological record of system activities that is sufficient to
enable the reconstruction and examination of the sequence
environments and activities surrounding or leading to an
operation, procedure, or event in a security-relevant transaction
from inception to final results. Requirements to support a
security audit is not covered in this document. The draft
[I-D.ietf-i2rs-traceability] describes traceability for I2RS
interface and protocol. Traceability is not equivalent to a
security audit trail.
I2RS integrity
The data transfer as it is transmitted between client and agent
cannot be modified by unauthorized parties without detection.
Hares, et al. Expires January 4, 2016 [Page 3]
Internet-Draft I2RS Security Requirements July 2015
2. Security-Related Requirements
The security for the I2RS protocol requires mutually authenticated
I2RS clients and I2RS agents. The I2RS client and I2RS agent using
the I2RS protocol MUST be able to exchange data over a secure
transport, but some functions may operate on non-secure transport.
The I2RS protocol MUST BE able to provide atomicity of a transaction,
but it is not required to have multi-message atomicity and rollback
mechanism transactions. Multiple messages transactions may be
impacted by the interdependency of data. This section discusses
these details of these security requirements.
2.1. Mutual authentication of I2RS client and I2RS Agent
The I2RS architecture [I-D.ietf-i2rs-architecture] sets the following
requirements:
o SEC-REQ-01: All I2RS clients and I2RS agents MUST have at least
one unique identifier that uniquely identifies each party.
o SEC-REQ-02: The I2RS protocol MUST utilize these identifiers for
mutual identification of the I2RS client and I2RS agent.
o SEC-REQ-03:An I2RS agent, upon receiving an I2RS message from a
client, MUST confirm that the client has a valid identity.
o SEC-REQ-04: The client, upon receiving an I2RS message from an
agent, MUST confirm the I2RS agent's identity.
o SEC-REQ-05: Identity distribution and the loading of these
identities into I2RS agent and I2RS Client SHOULD occur outside
the I2RS protocol.
o SEC-REQ-06: The I2RS protocol SHOULD assume some mechanism (IETF
or private) will distribute or load identities so that the I2RS
client/agent has these identities prior to the I2RS protocol
establishing a connection between I2RS client and I2RS agent.
o SEC-REQ-07: Each Identity MUST be linked to one priority
o SEC-REQ-08: Each Identity is associated with one secondary
identity during a particular read/write sequence, but the
secondary identity may vary during the time a connection between
the I2RS client and I2RS agent is active. The variance of the
secondary identity allows the I2rs client to be associated with
multiple applications and pass along an identifier for these
applications in the secondary identifier.
Hares, et al. Expires January 4, 2016 [Page 4]
Internet-Draft I2RS Security Requirements July 2015
2.2. Transport Requirements Based on Mutual Authentication
SEC-REQ-09: The data security of the I2RS protocol MUST be able to
support transfer of the data over a secure transport and optionally
be able to support a non-security transport. A security transport is
defined to have the qualities of confidentiality, has message
integrity, prevents replay attakc, and supports end-to-end integrity
of the I2RS client-agent session.
SEC-REQ-10: A secure transport MUST be be associated with a key
management solution that can guarantee that only the entities having
sufficient privileges can get the keys to encrypt/decrypt the
sensitive data. Pre-shared keys is considered for this document to
be a key management system. In addition, the key management
mechanisms need to be able to update the keys before they have lost
sufficient security strengths, without breaking the connection
between the agents and clients.
SEC-REQ-11: The I2RS protocol MUST be able to support multiple secure
transport sessions providing protocol and data communication between
an I2RS Agent and an I2RS client. However, a single I2RS Agent to
I2RS client connection MAY elect to use a single secure transport
session or a single non-secure transport session.
SEC-REQ-12: The I2RS Client and I2RS Agent protocol SHOULD implement
mechanisms that mitigate DoS attacks
2.3. Data Confidentiality Requirements
SEC-REQ-13: In a critical infrastructure, certain data within routing
elements is sensitive and read/write operations on such data MUST be
controlled in order to protect its confidentiality. For example,
most carriers do not want a router's configuration and data flow
statistics known by hackers or their competitors. While carriers may
share peering information, most carriers do not share configuration
and traffic statistics. To achieve this, access control to sensitive
data needs to be provided, and the confidentiality protection on such
data during transportation needs to be enforced.
2.4. Message Integrity Requirements
SEC-REQ-14: An integrity protection mechanism for I2RS SHOULD be able
to ensure the following: 1) the data being protected is not modified
without detection during its transportation and 2) the data is
actually from where it is expected to come from 3) the data is not
repeated from some earlier interaction of the protocol. That is,
when both confidentiality and integrity of data is properly
Hares, et al. Expires January 4, 2016 [Page 5]
Internet-Draft I2RS Security Requirements July 2015
protected, it is possible to ensure that encrypted data is not
modified or replayed without detection.
sec-REQ-15: The integrity that the message data is not repeated means
that I2RS client to I2RS agent transport SHOULD protect against
replay attack
Requirements SEC-REQ-13 and SEC-REQ-14 are SHOULD requirements only
because it is recognized that some I2RS Client to I2RS agent
communication occurs over a non-secure channel. The I2RS client to
I2RS agent over a secure channel would implement these features. In
order to provide some traceability or notification for the non-secure
protocol, SEC-REQ-16 suggests traceability and notification are
important to include for any non-secure protocol.
SEC-REQ-16: The I2RS message traceability and notification
requirements requirements found in [I-D.ietf-i2rs-traceability] and
[I-D.ietf-i2rs-pub-sub-requirements] SHOULD be supported in
communication channel that is non-secure to trace or notify about
potential security issues
2.4.1. Handling Multiple Messages
Section 7.9 of the [I-D.ietf-i2rs-architecture] states the I2RS
architecture does not include multi-message atomicity and rollback
mechanisms, but suggests an I2RS client may indicate one of the
following error handling techniques for a given message sent to the
I2RS client:
1. Perform all or none: All operations succeed or none of them will
be applied. This useful when there are mutual dependencies.
2. Perform until error: Operations are applied in order, and when
error occurs the processing stops. This is useful when
dependencies exist between multiple-message operations, and order
is important.
3. Perform all storing errors: Perform all actions storing error
indications for errors. This method can be used when there are
no dependencies between operations, and the client wants to sort
it out.
2.5. Role-Based Data Model Security
The [I-D.ietf-i2rs-architecture] defines a role or security role as
specifying read, write, or notification access by a I2RS client to
data within an agent's data model.
Hares, et al. Expires January 4, 2016 [Page 6]
Internet-Draft I2RS Security Requirements July 2015
SEC-REQ-18: The rules around what role is permitted to access and
manipulate what information plus a secure transport (which protects
the data in transit) SHOULD ensure that data of any level of
sensitivity is reasonably protected from being observed by those
without permission to view it, so that privacy requirements are met.
Observers without permission can refer to other I2RS clients,
attackers, or assorted MITM (man-in-the-middle) monkeys.
SEC-REQ-19: Role security MUST work when multiple transport
connections are being used between the I2RS client and I2RS agent as
the I2RS architecture [I-D.ietf-i2rs-architecture] states. These
transport message streams may start/stop without affecting the
existence of the client/agent data exchange. TCP supports a single
stream of data. SCTP [RFC4960] provides security for multiple
streams plus end-to-end transport of data.
SEC-REQ-20: I2RS clients MAY be used by multiple applications to
configure routing via I2RS agents, receive status reports, turn on
the I2RS audit stream, or turn on I2RS traceability. Application
software using I2RS client functions may host several multiple secure
identities, but each connection will use only one identity with one
priority. Therefore, the security of each I2RS Client to I2RS Agent
connection is unique.
Please note the security of the application to I2RS client connection
is outside of the I2RS protocol or I2RS interface.
3. Acknowledgement
The author would like to thank Wes George, Ahmed Abro, Qin Wu, Eric
Yu, Joel Halpern, Scott Brim, Nancy Cam-Winget, DaCheng Zhang, Alia
Atlas, and Jeff Haas for their contributions to the I2RS security
requirements discussion and this document.
4. IANA Considerations
This draft includes no request to IANA.
5. Security Considerations
This is a document about security requirements for the I2RS protocol
and data modules. The whole document is security considerations.
6. References
Hares, et al. Expires January 4, 2016 [Page 7]
Internet-Draft I2RS Security Requirements July 2015
6.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
6.2. Informative References
[I-D.haas-i2rs-ephemeral-state-reqs]
Haas, J., "I2RS Ephemeral State Requirements", draft-haas-
i2rs-ephemeral-state-reqs-00 (work in progress), May 2015.
[I-D.ietf-i2rs-architecture]
Atlas, A., Halpern, J., Hares, S., Ward, D., and T.
Nadeau, "An Architecture for the Interface to the Routing
System", draft-ietf-i2rs-architecture-09 (work in
progress), March 2015.
[I-D.ietf-i2rs-problem-statement]
Atlas, A., Nadeau, T., and D. Ward, "Interface to the
Routing System Problem Statement", draft-ietf-i2rs-
problem-statement-06 (work in progress), January 2015.
[I-D.ietf-i2rs-pub-sub-requirements]
Voit, E., Clemm, A., and A. Prieto, "Requirements for
Subscription to YANG Datastores", draft-ietf-i2rs-pub-sub-
requirements-02 (work in progress), March 2015.
[I-D.ietf-i2rs-rib-info-model]
Bahadur, N., Folkes, R., Kini, S., and J. Medved, "Routing
Information Base Info Model", draft-ietf-i2rs-rib-info-
model-06 (work in progress), March 2015.
[I-D.ietf-i2rs-traceability]
Clarke, J., Salgueiro, G., and C. Pignataro, "Interface to
the Routing System (I2RS) Traceability: Framework and
Information Model", draft-ietf-i2rs-traceability-03 (work
in progress), May 2015.
[RFC4949] Shirey, R., "Internet Security Glossary, Version 2", RFC
4949, August 2007.
[RFC4960] Stewart, R., "Stream Control Transmission Protocol", RFC
4960, September 2007.
Hares, et al. Expires January 4, 2016 [Page 8]
Internet-Draft I2RS Security Requirements July 2015
Authors' Addresses
Susan Hares
Huawei
7453 Hickory Hill
Saline, MI 48176
USA
Email: shares@ndzh.com
Daniel Migault
Ericsson
8400 boulevard Decarie
Montreal, QC HAP 2N2
Canada
Email: daniel.migault@ericsson.com
Joel Halpern
Ericsson
US
Email: joel.halpern@ericsson.com
Hares, et al. Expires January 4, 2016 [Page 9]
| PAFTECH AB 2003-2026 | 2026-04-24 02:47:31 |