One document matched: draft-fuxh-ccamp-boundary-explicit-control-ext-00.xml

<?xml version="1.0" encoding="US-ASCII"?>
<!DOCTYPE rfc SYSTEM "rfc2629.dtd">
<?rfc toc="yes"?>
<?rfc tocompact="yes"?>
<?rfc tocdepth="3"?>
<?rfc tocindent="yes"?>
<?rfc symrefs="yes"?>
<?rfc sortrefs="no"?>
<?rfc comments="yes"?>
<?rfc inline="yes"?>
<?rfc compact="yes"?>
<?rfc subcompact="no"?>
<rfc category="std" docName="draft-fuxh-ccamp-boundary-explicit-control-ext-00" ipr="trust200902">
	<front>
		<title abbrev="RSVP-TE for Region Boundary Control">		
		RSVP-TE Signaling Extension for Explicit Control of Region Boundary
		</title>
		<author fullname="Xihua Fu" initials="X" surname="Fu">
			<organization>ZTE Corporation</organization>
			<address>
				<postal>
					<street>West District,ZTE Plaza,No.10,Tangyan South Road,Gaoxin District</street>
					<city>Xi An</city>
					<code>710065</code>
					<country>P.R.China</country>
				</postal>
				<phone>+8613798412242</phone>
				<email>fu.xihua@zte.com.cn</email>
				<uri>http://wwwen.zte.com.cn/</uri>
			</address>
		</author>		 
		<author fullname="Xuefeng Lin" initials="X" surname="Lin">
			<organization>ZTE Corporation</organization>
			<address>
				<postal>
					<street>12F,ZTE Plaza,No.19,Huayuan East Road,Haidian District</street>
					<city>Beijing</city>
					<code>100191</code>
					<country>P.R.China</country>
				</postal>
				<phone>+8615901011821</phone>
				<email>lin.xuefeng@zte.com.cn</email>
				<uri>http://www.zte.com.cn/</uri>
			</address>
		</author>	
		
		<author fullname="Gang Xie" initials="G" surname="Xie">
			<organization>ZTE Corporation</organization>
			<address>
				<postal>
					<street>12F,ZTE Plaza,No.19,Huayuan East Road,Haidian District</street>
					<city>Beijing</city>
					<code>100191</code>
					<country>P.R.China</country>
				</postal>
				<phone>+8613691280432</phone>
				<email>xie.gang@zte.com.cn</email>
			</address>
		</author>		
		<date year="2010"/>
		<area>Routing</area>
		<workgroup>Network Working Group</workgroup>
		<keyword>Explicit Control</keyword>
		<keyword>Region Boundary</keyword>
		<keyword>Inter-Layer</keyword>
	  <keyword>PCE</keyword>
    <abstract>
      <t>[draft-fuxh-pce-boundary-explicit-control-framework-00] defines the framework for explicit control of region boundary in PCE-based inter-layer architecture. This document defines the RSVP-TE extension for region boundaries explicit control.</t>
    </abstract>
    <note title="Conventions Used In This Document">
      <t>The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
      "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
      document are to be interpreted as described in <xref target="RFC2119">RFC 2119</xref>.
      </t>
    </note>
  </front>

  <middle>
    <section title="Introduction">
      <t>[draft-fuxh-pce-boundary-explicit-control-framework-00] defines the framework for explicit control of region boundary in PCE-based inter-layer architecture. There is a requirements for RSVP-TE extensions to support explicit control of region boundary. A new object could be introduced in RSVP-TE signaling message.</t>    
    </section>
    <section title="ERBO (Explicit Region Boundary Object)">
    	<t>The format of ERBO object is the same as an ERO. The ERBO including the region boundaries information can be carried in Path message.</t>
    </section>
    <section title="RSVP-TE Extension">
    	<t>The Pathe message is extended as followings:</t>
  		<figure>
	  	<artwork align="center">
			<![CDATA[
     <Path Message> ::= <Common Header> [ <INTEGRITY> ]
                   [ [<MESSAGE_ID_ACK> | <MESSAGE_ID_NACK>] ... ]
                   [ <MESSAGE_ID> ]
                   <SESSION> <RSVP_HOP>
                   <TIME_VALUES>
                   [ <EXPLICIT_ROUTE> ]
                   [ < ERBO > ]  
                   <LABEL_REQUEST>
                   [ <PROTECTION> ]
                   [ <LABEL_SET> ... ]
                   [ <SESSION_ATTRIBUTE> ]
                   [ <NOTIFY_REQUEST> ]
                   [ <ADMIN_STATUS> ]
                   [ <POLICY_DATA> ... ]
                   <sender descriptor>
      <sender descriptor> ::=  <SENDER_TEMPLATE> <SENDER_TSPEC>
                         [ <ADSPEC> ]
                         [ <RECORD_ROUTE> ]
                         [ <SUGGESTED_LABEL> ]
                         [ <RECOVERY_LABEL> ]
                         <UPSTREAM_LABEL>]]>
	      </artwork>
	      </figure>	
    </section>
    <section title="Signaling Procedure">
    	<t>TBD</t>    
    </section>
     
    <section title="Security Considerations">
      <t>TBD</t>
    </section>
    <section title="IANA Considerations">
      <t>TBD</t>
    </section>
  </middle>
  <back>
    <references title="Normative References">
      <?rfc include='reference.RFC.2119'?>
    </references>
    <references title="Informative References">    
    </references>
  </back>
</rfc>