One document matched: draft-fielding-http-p5-range-00.txt
Network Working Group R. Fielding, Ed.
Internet-Draft Day Software
Obsoletes: 2068, 2616, 2617 J. Gettys
(if approved) J. Mogul
Intended status: Standards Track HP
Expires: May 14, 2008 H. Frystyk
Microsoft
L. Masinter
Adobe Systems
P. Leach
Microsoft
T. Berners-Lee
W3C/MIT
November 11, 2007
HTTP/1.1, part 5: Range Requests and Partial Responses
draft-fielding-http-p5-range-00
Status of this Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on May 14, 2008.
Copyright Notice
Copyright (C) The IETF Trust (2007).
Fielding, et al. Expires May 14, 2008 [Page 1]
Internet-Draft HTTP/1.1 November 2007
Abstract
The Hypertext Transfer Protocol (HTTP) is an application-level
protocol for distributed, collaborative, hypermedia information
systems. HTTP has been in use by the World Wide Web global
information initiative since 1990. This document is Part 5 of the
eight-part specification that defines the protocol referred to as
"HTTP/1.1" and, taken together, updates RFC 2616 and RFC 2617. Part
5 defines range-specific requests and the rules for constructing and
combining responses to those requests.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Range Units . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. 206 Partial Content . . . . . . . . . . . . . . . . . . . . . 3
4. 416 Requested Range Not Satisfiable . . . . . . . . . . . . . 4
5. Combining Byte Ranges . . . . . . . . . . . . . . . . . . . . 4
6. Header Field Definitions . . . . . . . . . . . . . . . . . . . 5
6.1. Accept-Ranges . . . . . . . . . . . . . . . . . . . . . . 5
6.2. Content-Range . . . . . . . . . . . . . . . . . . . . . . 5
6.3. If-Range . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.4. Range . . . . . . . . . . . . . . . . . . . . . . . . . . 8
6.4.1. Byte Ranges . . . . . . . . . . . . . . . . . . . . . 8
6.4.2. Range Retrieval Requests . . . . . . . . . . . . . . . 10
7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 11
8. Security Considerations . . . . . . . . . . . . . . . . . . . 11
9. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 11
10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Appendix A. Internet Media Type multipart/byteranges . . . . . . 11
Appendix B. Changes from RFC 2068 . . . . . . . . . . . . . . . . 13
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 14
Intellectual Property and Copyright Statements . . . . . . . . . . 17
Fielding, et al. Expires May 14, 2008 [Page 2]
Internet-Draft HTTP/1.1 November 2007
1. Introduction
This document will define aspects of HTTP related to range requests,
partial responses, and the multipart/byteranges media type. Right
now it only includes the extracted relevant sections of RFC 2616
[RFC2616] without edit.
2. Range Units
HTTP/1.1 allows a client to request that only part (a range of) the
response entity be included within the response. HTTP/1.1 uses range
units in the Range (Section 6.4) and Content-Range (Section 6.2)
header fields. An entity can be broken down into subranges according
to various structural units.
range-unit = bytes-unit | other-range-unit
bytes-unit = "bytes"
other-range-unit = token
The only range unit defined by HTTP/1.1 is "bytes". HTTP/1.1
implementations MAY ignore ranges specified using other units.
HTTP/1.1 has been designed to allow implementations of applications
that do not depend on knowledge of ranges.
3. 206 Partial Content
The server has fulfilled the partial GET request for the resource.
The request MUST have included a Range header field (Section 6.4)
indicating the desired range, and MAY have included an If-Range
header field (Section 6.3) to make the request conditional.
The response MUST include the following header fields:
o Either a Content-Range header field (Section 6.2) indicating the
range included with this response, or a multipart/byteranges
Content-Type including Content-Range fields for each part. If a
Content-Length header field is present in the response, its value
MUST match the actual number of OCTETs transmitted in the message-
body.
o Date
o ETag and/or Content-Location, if the header would have been sent
in a 200 response to the same request
Fielding, et al. Expires May 14, 2008 [Page 3]
Internet-Draft HTTP/1.1 November 2007
o Expires, Cache-Control, and/or Vary, if the field-value might
differ from that sent in any previous response for the same
variant
If the 206 response is the result of an If-Range request, the
response SHOULD NOT include other entity-headers. Otherwise, the
response MUST include all of the entity-headers that would have been
returned with a 200 (OK) response to the same request.
A cache MUST NOT combine a 206 response with other previously cached
content if the ETag or Last-Modified headers do not match exactly,
see 5.
A cache that does not support the Range and Content-Range headers
MUST NOT cache 206 (Partial) responses.
4. 416 Requested Range Not Satisfiable
A server SHOULD return a response with this status code if a request
included a Range request-header field (Section 6.4), and none of the
range-specifier values in this field overlap the current extent of
the selected resource, and the request did not include an If-Range
request-header field. (For byte-ranges, this means that the first-
byte-pos of all of the byte-range-spec values were greater than the
current length of the selected resource.)
When this status code is returned for a byte-range request, the
response SHOULD include a Content-Range entity-header field
specifying the current length of the selected resource (see
Section 6.2). This response MUST NOT use the multipart/byteranges
content-type.
5. Combining Byte Ranges
A response might transfer only a subrange of the bytes of an entity-
body, either because the request included one or more Range
specifications, or because a connection was broken prematurely.
After several such transfers, a cache might have received several
ranges of the same entity-body.
If a cache has a stored non-empty set of subranges for an entity, and
an incoming response transfers another subrange, the cache MAY
combine the new subrange with the existing set if both the following
conditions are met:
Fielding, et al. Expires May 14, 2008 [Page 4]
Internet-Draft HTTP/1.1 November 2007
o Both the incoming response and the cache entry have a cache
validator.
o The two cache validators match using the strong comparison
function (see [Part 4]).
If either requirement is not met, the cache MUST use only the most
recent partial response (based on the Date values transmitted with
every response, and using the incoming response if these values are
equal or missing), and MUST discard the other partial information.
6. Header Field Definitions
This section defines the syntax and semantics of all standard
HTTP/1.1 header fields. For entity-header fields, both sender and
recipient refer to either the client or the server, depending on who
sends and who receives the entity.
6.1. Accept-Ranges
The Accept-Ranges response-header field allows the server to indicate
its acceptance of range requests for a resource:
Accept-Ranges = "Accept-Ranges" ":" acceptable-ranges
acceptable-ranges = 1#range-unit | "none"
Origin servers that accept byte-range requests MAY send
Accept-Ranges: bytes
but are not required to do so. Clients MAY generate byte-range
requests without having received this header for the resource
involved. Range units are defined in Section 2.
Servers that do not accept any kind of range request for a resource
MAY send
Accept-Ranges: none
to advise the client not to attempt a range request.
6.2. Content-Range
The Content-Range entity-header is sent with a partial entity-body to
specify where in the full entity-body the partial body should be
applied. Range units are defined in Section 2.
Fielding, et al. Expires May 14, 2008 [Page 5]
Internet-Draft HTTP/1.1 November 2007
Content-Range = "Content-Range" ":" content-range-spec
content-range-spec = byte-content-range-spec
byte-content-range-spec = bytes-unit SP
byte-range-resp-spec "/"
( instance-length | "*" )
byte-range-resp-spec = (first-byte-pos "-" last-byte-pos)
| "*"
instance-length = 1*DIGIT
The header SHOULD indicate the total length of the full entity-body,
unless this length is unknown or difficult to determine. The
asterisk "*" character means that the instance-length is unknown at
the time when the response was generated.
Unlike byte-ranges-specifier values (see Section 6.4.1), a byte-
range-resp-spec MUST only specify one range, and MUST contain
absolute byte positions for both the first and last byte of the
range.
A byte-content-range-spec with a byte-range-resp-spec whose last-
byte-pos value is less than its first-byte-pos value, or whose
instance-length value is less than or equal to its last-byte-pos
value, is invalid. The recipient of an invalid byte-content-range-
spec MUST ignore it and any content transferred along with it.
A server sending a response with status code 416 (Requested range not
satisfiable) SHOULD include a Content-Range field with a byte-range-
resp-spec of "*". The instance-length specifies the current length
of the selected resource. A response with status code 206 (Partial
Content) MUST NOT include a Content-Range field with a byte-range-
resp-spec of "*".
Examples of byte-content-range-spec values, assuming that the entity
contains a total of 1234 bytes:
o The first 500 bytes:
bytes 0-499/1234
o The second 500 bytes:
bytes 500-999/1234
o All except for the first 500 bytes:
bytes 500-1233/1234
Fielding, et al. Expires May 14, 2008 [Page 6]
Internet-Draft HTTP/1.1 November 2007
o The last 500 bytes:
bytes 734-1233/1234
When an HTTP message includes the content of a single range (for
example, a response to a request for a single range, or to a request
for a set of ranges that overlap without any holes), this content is
transmitted with a Content-Range header, and a Content-Length header
showing the number of bytes actually transferred. For example,
HTTP/1.1 206 Partial content
Date: Wed, 15 Nov 1995 06:25:24 GMT
Last-Modified: Wed, 15 Nov 1995 04:58:08 GMT
Content-Range: bytes 21010-47021/47022
Content-Length: 26012
Content-Type: image/gif
When an HTTP message includes the content of multiple ranges (for
example, a response to a request for multiple non-overlapping
ranges), these are transmitted as a multipart message. The multipart
media type used for this purpose is "multipart/byteranges" as defined
in Appendix A. See Appendix B for a compatibility issue.
A response to a request for a single range MUST NOT be sent using the
multipart/byteranges media type. A response to a request for
multiple ranges, whose result is a single range, MAY be sent as a
multipart/byteranges media type with one part. A client that cannot
decode a multipart/byteranges message MUST NOT ask for multiple byte-
ranges in a single request.
When a client requests multiple byte-ranges in one request, the
server SHOULD return them in the order that they appeared in the
request.
If the server ignores a byte-range-spec because it is syntactically
invalid, the server SHOULD treat the request as if the invalid Range
header field did not exist. (Normally, this means return a 200
response containing the full entity).
If the server receives a request (other than one including an If-
Range request-header field) with an unsatisfiable Range request-
header field (that is, all of whose byte-range-spec values have a
first-byte-pos value greater than the current length of the selected
resource), it SHOULD return a response code of 416 (Requested range
not satisfiable) (Section 4).
Note: clients cannot depend on servers to send a 416 (Requested
range not satisfiable) response instead of a 200 (OK) response for
Fielding, et al. Expires May 14, 2008 [Page 7]
Internet-Draft HTTP/1.1 November 2007
an unsatisfiable Range request-header, since not all servers
implement this request-header.
6.3. If-Range
If a client has a partial copy of an entity in its cache, and wishes
to have an up-to-date copy of the entire entity in its cache, it
could use the Range request-header with a conditional GET (using
either or both of If-Unmodified-Since and If-Match.) However, if the
condition fails because the entity has been modified, the client
would then have to make a second request to obtain the entire current
entity-body.
The If-Range header allows a client to "short-circuit" the second
request. Informally, its meaning is `if the entity is unchanged,
send me the part(s) that I am missing; otherwise, send me the entire
new entity'.
If-Range = "If-Range" ":" ( entity-tag | HTTP-date )
If the client has no entity tag for an entity, but does have a Last-
Modified date, it MAY use that date in an If-Range header. (The
server can distinguish between a valid HTTP-date and any form of
entity-tag by examining no more than two characters.) The If-Range
header SHOULD only be used together with a Range header, and MUST be
ignored if the request does not include a Range header, or if the
server does not support the sub-range operation.
If the entity tag given in the If-Range header matches the current
entity tag for the entity, then the server SHOULD provide the
specified sub-range of the entity using a 206 (Partial content)
response. If the entity tag does not match, then the server SHOULD
return the entire entity using a 200 (OK) response.
6.4. Range
6.4.1. Byte Ranges
Since all HTTP entities are represented in HTTP messages as sequences
of bytes, the concept of a byte range is meaningful for any HTTP
entity. (However, not all clients and servers need to support byte-
range operations.)
Byte range specifications in HTTP apply to the sequence of bytes in
the entity-body (not necessarily the same as the message-body).
A byte range operation MAY specify a single range of bytes, or a set
of ranges within a single entity.
Fielding, et al. Expires May 14, 2008 [Page 8]
Internet-Draft HTTP/1.1 November 2007
ranges-specifier = byte-ranges-specifier
byte-ranges-specifier = bytes-unit "=" byte-range-set
byte-range-set = 1#( byte-range-spec | suffix-byte-range-spec )
byte-range-spec = first-byte-pos "-" [last-byte-pos]
first-byte-pos = 1*DIGIT
last-byte-pos = 1*DIGIT
The first-byte-pos value in a byte-range-spec gives the byte-offset
of the first byte in a range. The last-byte-pos value gives the
byte-offset of the last byte in the range; that is, the byte
positions specified are inclusive. Byte offsets start at zero.
If the last-byte-pos value is present, it MUST be greater than or
equal to the first-byte-pos in that byte-range-spec, or the byte-
range-spec is syntactically invalid. The recipient of a byte-range-
set that includes one or more syntactically invalid byte-range-spec
values MUST ignore the header field that includes that byte-range-
set.
If the last-byte-pos value is absent, or if the value is greater than
or equal to the current length of the entity-body, last-byte-pos is
taken to be equal to one less than the current length of the entity-
body in bytes.
By its choice of last-byte-pos, a client can limit the number of
bytes retrieved without knowing the size of the entity.
suffix-byte-range-spec = "-" suffix-length
suffix-length = 1*DIGIT
A suffix-byte-range-spec is used to specify the suffix of the entity-
body, of a length given by the suffix-length value. (That is, this
form specifies the last N bytes of an entity-body.) If the entity is
shorter than the specified suffix-length, the entire entity-body is
used.
If a syntactically valid byte-range-set includes at least one byte-
range-spec whose first-byte-pos is less than the current length of
the entity-body, or at least one suffix-byte-range-spec with a non-
zero suffix-length, then the byte-range-set is satisfiable.
Otherwise, the byte-range-set is unsatisfiable. If the byte-range-
set is unsatisfiable, the server SHOULD return a response with a
status of 416 (Requested range not satisfiable). Otherwise, the
server SHOULD return a response with a status of 206 (Partial
Content) containing the satisfiable ranges of the entity-body.
Examples of byte-ranges-specifier values (assuming an entity-body of
length 10000):
Fielding, et al. Expires May 14, 2008 [Page 9]
Internet-Draft HTTP/1.1 November 2007
o The first 500 bytes (byte offsets 0-499, inclusive): bytes=0-499
o The second 500 bytes (byte offsets 500-999, inclusive): bytes=500-
999
o The final 500 bytes (byte offsets 9500-9999, inclusive): bytes=-
500
o Or bytes=9500-
o The first and last bytes only (bytes 0 and 9999): bytes=0-0,-1
o Several legal but not canonical specifications of the second 500
bytes (byte offsets 500-999, inclusive):
bytes=500-600,601-999
bytes=500-700,601-999
6.4.2. Range Retrieval Requests
HTTP retrieval requests using conditional or unconditional GET
methods MAY request one or more sub-ranges of the entity, instead of
the entire entity, using the Range request header, which applies to
the entity returned as the result of the request:
Range = "Range" ":" ranges-specifier
A server MAY ignore the Range header. However, HTTP/1.1 origin
servers and intermediate caches ought to support byte ranges when
possible, since Range supports efficient recovery from partially
failed transfers, and supports efficient partial retrieval of large
entities.
If the server supports the Range header and the specified range or
ranges are appropriate for the entity:
o The presence of a Range header in an unconditional GET modifies
what is returned if the GET is otherwise successful. In other
words, the response carries a status code of 206 (Partial Content)
instead of 200 (OK).
o The presence of a Range header in a conditional GET (a request
using one or both of If-Modified-Since and If-None-Match, or one
or both of If-Unmodified-Since and If-Match) modifies what is
returned if the GET is otherwise successful and the condition is
true. It does not affect the 304 (Not Modified) response returned
if the conditional is false.
In some cases, it might be more appropriate to use the If-Range
Fielding, et al. Expires May 14, 2008 [Page 10]
Internet-Draft HTTP/1.1 November 2007
header (see Section 6.3) in addition to the Range header.
If a proxy that supports ranges receives a Range request, forwards
the request to an inbound server, and receives an entire entity in
reply, it SHOULD only return the requested range to its client. It
SHOULD store the entire received response in its cache if that is
consistent with its cache allocation policies.
7. IANA Considerations
TBD.
8. Security Considerations
No additional security considerations have been identified beyond
those applicable to HTTP in general [Part 1].
9. Acknowledgments
Most of the specification of ranges is based on work originally done
by Ari Luotonen and John Franks, with additional input from Steve
Zilles.
Based on an XML translation of RFC 2616 by Julian Reschke.
10. References
[RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part Two: Media Types", RFC 2046,
November 1996.
[RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.
Appendix A. Internet Media Type multipart/byteranges
When an HTTP 206 (Partial Content) response message includes the
content of multiple ranges (a response to a request for multiple non-
overlapping ranges), these are transmitted as a multipart message-
body. The media type for this purpose is called "multipart/
byteranges".
Fielding, et al. Expires May 14, 2008 [Page 11]
Internet-Draft HTTP/1.1 November 2007
The multipart/byteranges media type includes two or more parts, each
with its own Content-Type and Content-Range fields. The required
boundary parameter specifies the boundary string used to separate
each body-part.
Media Type name: multipart
Media subtype name: byteranges
Required parameters: boundary
Optional parameters: none
Encoding considerations: only "7bit", "8bit", or "binary" are
permitted
Security considerations: none
For example:
HTTP/1.1 206 Partial Content
Date: Wed, 15 Nov 1995 06:25:24 GMT
Last-Modified: Wed, 15 Nov 1995 04:58:08 GMT
Content-type: multipart/byteranges; boundary=THIS_STRING_SEPARATES
--THIS_STRING_SEPARATES
Content-type: application/pdf
Content-range: bytes 500-999/8000
...the first range...
--THIS_STRING_SEPARATES
Content-type: application/pdf
Content-range: bytes 7000-7999/8000
...the second range
--THIS_STRING_SEPARATES--
Notes:
1. Additional CRLFs may precede the first boundary string in the
entity.
2. Although RFC 2046 [RFC2046] permits the boundary string to be
quoted, some existing implementations handle a quoted boundary
string incorrectly.
3. A number of browsers and servers were coded to an early draft of
the byteranges specification to use a media type of multipart/
Fielding, et al. Expires May 14, 2008 [Page 12]
Internet-Draft HTTP/1.1 November 2007
x-byteranges, which is almost, but not quite compatible with the
version documented in HTTP/1.1.
Appendix B. Changes from RFC 2068
There are situations where a server (especially a proxy) does not
know the full length of a response but is capable of serving a
byterange request. We therefore need a mechanism to allow byteranges
with a content-range not indicating the full length of the message.
(Section 6.2)
Range request responses would become very verbose if all meta-data
were always returned; by allowing the server to only send needed
headers in a 206 response, this problem can be avoided.
Fix problem with unsatisfiable range requests; there are two cases:
syntactic problems, and range doesn't exist in the document. The 416
status code was needed to resolve this ambiguity needed to indicate
an error for a byte range request that falls outside of the actual
contents of a document. (Section 4, 6.2)
Index
2
206 Partial Content (status code) 3
4
416 Requested Range Not Satisfiable (status code) 4
A
Accept-Ranges header 5
C
Content-Range header 5
G
Grammar
Accept-Ranges 5
acceptable-ranges 5
byte-content-range-spec 6
byte-range-resp-spec 6
byte-range-set 9
byte-range-spec 9
byte-ranges-specifier 9
bytes-unit 3
Content-Range 6
Fielding, et al. Expires May 14, 2008 [Page 13]
Internet-Draft HTTP/1.1 November 2007
content-range-spec 6
first-byte-pos 9
If-Range 8
instance-length 6
last-byte-pos 9
other-range-unit 3
Range 10
range-unit 3
ranges-specifier 9
suffix-byte-range-spec 9
suffix-length 9
H
Headers
Accept-Ranges 5
Content-Range 5
If-Range 8
Range 8
I
If-Range header 8
M
Media Type
multipart/byteranges 11
multipart/x-byteranges 13
multipart/byteranges Media Type 11
multipart/x-byteranges Media Type 13
R
Range header 8
S
Status Codes
206 Partial Content 3
416 Requested Range Not Satisfiable 4
Fielding, et al. Expires May 14, 2008 [Page 14]
Internet-Draft HTTP/1.1 November 2007
Authors' Addresses
Roy T. Fielding (editor)
Day Software
23 Corporate Plaza DR, Suite 280
Newport Beach, CA 92660
USA
Phone: +1-949-706-5300
Fax: +1-949-706-5305
Email: fielding@gbiv.com
URI: http://roy.gbiv.com/
James Gettys
Hewlett-Packard Company
HP Labs, Cambridge Research Laboratory
One Cambridge Center
Cambridge, MA 02138
USA
Email: Jim.Gettys@hp.com
Jeffrey C. Mogul
Hewlett-Packard Company
HP Labs, Large Scale Systems Group
1501 Page Mill Road, MS 1177
Palo Alto, CA 94304
USA
Email: JeffMogul@acm.org
Henrik Frystyk Nielsen
Microsoft Corporation
1 Microsoft Way
Redmond, WA 98052
USA
Email: henrikn@microsoft.com
Fielding, et al. Expires May 14, 2008 [Page 15]
Internet-Draft HTTP/1.1 November 2007
Larry Masinter
Adobe Systems, Incorporated
345 Park Ave
San Jose, CA 95110
USA
Email: LMM@acm.org
URI: http://larry.masinter.net/
Paul J. Leach
Microsoft Corporation
1 Microsoft Way
Redmond, WA 98052
Email: paulle@microsoft.com
Tim Berners-Lee
World Wide Web Consortium
MIT Laboratory for Computer Science
545 Technology Square
Cambridge, MA 02139
USA
Fax: +1 (617) 258 8682
Email: timbl@w3.org
Fielding, et al. Expires May 14, 2008 [Page 16]
Internet-Draft HTTP/1.1 November 2007
Full Copyright Statement
Copyright (C) The IETF Trust (2007).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgment
Funding for the RFC Editor function is provided by the IETF
Administrative Support Activity (IASA).
Fielding, et al. Expires May 14, 2008 [Page 17]
| PAFTECH AB 2003-2026 | 2026-04-24 04:15:28 |